Engineer jobs in Rochester, MN - 72 jobs

About Us At American Engineering Testing (AET), we believe that people are the heart of innovation. We create an environment that values teamwork, curiosity, and continuous improvement while delivering innovative engineering and consulting solutions. As a 100% employee-owned firm, we deliver comprehensive testing, analysis, and design to reduce uncertainty in construction projects and offer rewarding work, exceptional training, and career development opportunities. Job Summary Field Engineer plays a critical role in supporting the Construction Services Division by assisting engineers and technicians with project duties in the field. This position is responsible for supporting engineering projects, performing laboratory testing, and conducting field observation of construction materials, ensuring accurate data collection and reliable project outcomes. The ideal candidate will demonstrate adaptability, technical expertise, and a collaborative mindset, and contribute to the division's mission of delivering high-quality construction services. Essential Duties and Responsibilities Field and Laboratory Work Perform field and laboratory quality control testing of soils in accordance with AET QA/QC procedures and industry standards (ASTM, ASIC, ACI). Conduct geotechnical field testing, soil boring layout/documentation, utility clearance meetings, and surveying. Complete field sampling of materials, including coring and hand auger borings. Operate and maintain specialized equipment such as Ground Penetrating Radar (GPR), Falling Weight Deflectometer (FWD), and Geoprobe sampling units. Log and classify soil samples in the field or laboratory as needed. Assist in training less experienced personnel in routine field work and documentation. Reporting and Communication Prepare detailed reports of field and laboratory work using standard AET forms. Document site observations and maintain accurate job files. Communicate effectively with project managers, clients, contractors, and other project personnel to ensure project requirements are met. Complete tasks in accordance with project quality requirements and deadlines. Compliance and Safety Conduct all activities in compliance with federal, state, and local regulations, as well as AET's QA and Health & Safety Policies. Maintain valid driver's license and acceptable driving record; comply with DOT regulations if required. Maintain appropriate physicals if required for position. Properly use and maintain company instruments and equipment. Additional Responsibilities Assist with laboratory maintenance and improvement efforts. Maintain high chargeable productivity and coordinate with other staff to increase efficiency and communication. Establish and maintain positive business relationships with clients; assist with marketing functions as needed. Frequent travel within regional area; occasional out-of-town travel (up to 75%), nights, or weekends. Perform other duties as necessary to meet departmental and company goals. Required Qualifications and Education Bachelor's degree in Civil, Geological, or related Engineering field. 0-3 years of experience in an engineering or science related field. Preferred Qualifications Engineer in Training (EIT) and ability to achieve professional registration (PE). Internship or previous work experience preferred, but not mandatory. Solid understanding of engineering or scientific principles and ability to apply them in practice. Proficiency with Microsoft Office and basic computer applications. Ability to perform field work at construction or remediation sites, including sampling, operating instruments, following procedures, and documenting activities. Strong communication skills to clearly convey technical information to diverse audiences. Effective teamwork and problem-solving skills; ability to work independently in the field. Physically capable of performing labor-intensive tasks, including lifting 50-100 lbs and conducting hand auger borings. Work Environment This job primarily operates primary in a field environment in outdoor conditions, on construction sites with uneven ground and adverse weather conditions. This role secondary operates in an office environment and uses standard office equipment such as computers, phones, and photocopiers. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands or finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance, and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50-100 pounds. The employee will occasionally push or pull equipment weighing up to 200 pounds. The employee is required to frequently work outside. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Pay Transparency Base compensation is expected to be in the range of $27.00 - $29.00 per hour based on skill set and experience. AET offers a comprehensive benefits package, including health benefits, insurance, Employee Stock Ownership Plan (ESOP), long-term savings, paid time off, and professional development opportunities. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future. Third Party Disclosure Notice to Third Party Agencies: AET does not accept unsolicited resumes from third party recruiting firms. Absent a signed Service Agreement by AET's Chief People Officer (CPO), AET reserves the right to pursue and hire these candidates without financial obligation to recruiters or agencies.

Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. Safety and integrity aren't just buzzwords. They are the north star guiding us as we aspire to wow our customers every day. We've created power solutions that are not only durable and unique but are also the result of serious teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. As a big name and pioneer in power solutions, we're not just part of the power conversation - we're shaping its future, and we're doing so across diverse industry sectors including healthcare, data centers, entertainment, education, government, and commercial construction - just to name a few! We're committed to growing and evolving our product lineup to stay on top of the game and that includes leaning into sustainable, resilient, and renewable energy solutions. Trystar's team members are our most important asset, we are in search of a Staff Engineer - Sustaining Mechanical Engineering to join our team. As part of the engineering team, the Sr. Sustaining Mechanical Engineer will have the opportunity to support and improve maintenance series production products. In this role, you will be responsible to track, troubleshoot and identify root cause and implement engineering changes as well as supporting new product manufacturing introduction in local and across enterprise-wide products. This position reports directly to the Sustaining Engineering Manager. We are looking for people who believe in our guiding principles and values of: Safety - We believe everyone should leave Trystar facilities in the same or better condition than when they arrived. Integrity - We're honest, transparent, and committed to doing what's right. Customer focus - We have relentless focus on our customers and their success. Right with speed - We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity. Play for each other - We're a team. We show up for each other and we know that through teamwork we achieve greatness. Champion change - We know adaptation and improvement are requirements to survive and to thrive. Enjoy the journey - We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: Create, improve and facilitate legacy products engineering documentation, including Bill of Materials (BOM), 3D models and drawings. Conduct root cause analysis to resolve issues and implement corrective actions as part of Trystar's continuous improvement program. Support a smooth handover of new products from engineering to manufacturing by participating in DFM/DFA reviews and ensuring lessons learned adherence. Generate, track and coordinate Engineering Change Orders (ECO) for production collaborating with internal teams. Identify, promote and implement modularity within the product and across different products for design efficiency. Vet new opportunities, and recommend product changes/improvements to enhance product manufacturability and/or reduce cost Job Requirements: BASIC QUALIFICATIONS Bachelor's degree in Mechanical Engineering or an equivalent. 15+ years of experience in manufacturing floor support/product design. Experienced in engineering detailed drawings, and BOM in a high product customization manufacturing environment. Strong problem-solving skills in a fast-paced environment. ADDITIONAL QUALIFICATIONS Highly motivated, fast learner with exceptional attention to detail that thrives in a team environment. Experience with engineering change implementation. Experience with complex electro-mechanical assemblies in SolidWorks or other CAD system. Sheet metal part design and fabrication experience. Experience with electromechanical systems; familiar with electrical schematics, symbols, and basic electrical theory. Implementing ASME Y14.5 and GD&T standards to drawings identifying critical dimensions according to tolerance stack analysis and manufacturing processes capabilities. Experience with ERP, PLM and Engineering Vault software (PDM). DFM/DFA and New Product Introduction experience. Attention to details, and hands-on support to manufacturing. Support manufacturing defining corrective and preventive actions and ensure enterprise-wide adherence of best practices and lessons learned Up to 10% travel to different Trystar locations, suppliers and/or customers. Work in accordance with all company policies and procedures regarding employment, safety, quality, product safety and legality, security, and regulatory compliance, as applicable. Passion for Trystar, its culture, and a commitment to deliver on its growth, performance, and operational metrics

As a Manufacturing Engineer, you will take on full manufacturing responsibility, guiding products through prototype, pilot, and production stages. You will oversee the implementation of customer documentation changes and manage internal change orders. Your role includes reporting on the status of New Product Launch (NPL) activities and utilizing statistical tools to lead quality improvements within the customer team. Responsibilities: + Drive internal and external corrective action plans. + Actively participate in new customer and business development. + Analyze line return information to understand and drive corrective action on manufacturing process issues. + Perform product-level assessments as required. + Perform Design for Manufacturability and collaborate with Test Engineering on Design for Testability. + Assist in developing project proposals and associated cost estimates. + Execute transitional manufacturing requirements and process approaches for products. + Develop in-depth knowledge of customer products to support transitional activities. Essential Skills: + Expertise in manufacturing engineering, lean six sigma, and green belt. + Experience in electronics manufacturing. + Must hold a Bachelor of Science in Engineering. + Minimum of 2+ years of experience as a manufacturing engineer in a production setting. + Ability to solve and document moderately complex cross-departmental issues using structured problem-solving tools. + Proficiency in written and oral communication and presentation skills for internal and external customers. Additional Skills & Qualifications: + Excellent written and verbal communication skills. + Effective interpersonal and multitasking skills. + Strong organization and prioritization skills. + High attention to detail. + Ability to work with diverse groups. + Demonstrates discretion, confidentiality, independent judgment, and professionalism. + Ability to work with minimal supervision and guidance. + Understanding of and ability to use continuous improvement tools. + Strong customer service and client focus. + Working knowledge of productivity tools, including Microsoft Office products and WebEx conferencing software. + Engineering-level understanding of electronic or mechanical components and systems depending on education and experience. Job Type & Location This is a Contract to Hire position based out of Rochester, MN. Pay and Benefits The pay range for this position is $38.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,MN. Application Deadline This position is anticipated to close on Jan 28, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

About Kerry Kerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment. Key responsibilities Project Management * Plan, design, and execute capital and operational projects from concept through commissioning. * Develop project scopes, budgets, schedules, and resource plans. * Coordinate contractors, vendors, and internal teams to ensure timely delivery. Regulatory Compliance * Ensure all projects meet MDA and USDA requirements, including sanitary design, food safety, and inspection readiness. * Collaborate with Quality Assurance and Regulatory Affairs to integrate compliance into engineering solutions. * Maintain documentation for audits, inspections, and regulatory submissions. Engineering & Technical Support * Design and implement process improvements to increase efficiency, reduce waste, and improve product quality. * Support installation, validation, and troubleshooting of equipment and systems. * Apply sanitary design principles to all facility and equipment modifications. Cross-Functional Collaboration * Partner with Operations, Maintenance, Quality, and Safety teams to align engineering projects with plant needs. * Provide technical training and guidance to plant personnel on new systems and equipment. Safety & Sustainability * Incorporate OSHA and environmental standards into project execution. * Drive energy efficiency and sustainability initiatives within plant operations. Qualifications and skills * Bachelor's degree in Engineering (Mechanical, Electrical, Chemical, or Industrial preferred). * 3-5 years of experience in food manufacturing or other regulated industries. * Knowledge of MDA and USDA food plant regulations, sanitary design principles, and HACCP standards. * Strong project management skills with proven experience in budgeting and scheduling. * Excellent communication and collaboration abilities. * Proficiency with CAD software, project management tools, and MS Office Suite. Compensation Data The pay range for this position is $64,479 - $105,272 in Annual Salary. Kerry typically does not hire an individual at the top or near the top of the range, as we are a pay-for-performance company, and this range is set to continue to reward performance annually while in role. Compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate within the above range may be influenced by a variety of factors including skills, qualifications, experience, and internal equity. Kerry offers a competitive benefits package, including medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, Employee Share Plan, Life, disability, and accident insurance, and tuition reimbursement. This job posting is anticipated to expire on February 27, 2026. Kerry is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age disability, protected veteran status or other characteristics protected by law. Kerry will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen. Additional information can be found at Know Your Rights Workplace Discrimination is Illegal (dol.gov).

Project Engineer ***Work Location: Minot AFB (Minot, ND)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for overseeing all aspects of construction projects, from planning to execution and closeout. Managing and overseeing project plans, schedules, and budgets Coordinating with architects, engineers, and contractors to ensure project milestones are met; serving as a primary point of contact for clients and stakeholders, communicating project progress, issues, and resolutions effectively Performing documents review of contract documents for schedule compliance and reasonability. Identifying potential risks and developing mitigation strategies; ensuring compliance with legal and regulatory requirements Implementing quality control measures to ensure work meets specifications and standards Conducting regular inspections and audits to identify and address quality issues Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Assisting with hosting site visits and giving presentations to owner's representatives. Providing guidance, mentoring, and training to team members; overseeing contract negotiations, administration, and compliance, resolving disputes and issues related to contracts Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Produce monthly project reports displaying project status and updates for customers Participates in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and prepares contract modification documentation. Attend and participate in meetings with customers and contractors. Performs other duties as assigned Education/Experience: Bachelor's Degree in Engineering, Construction Management, Architecture, or related field Minimum 10 years Construction Project Management experience PMP certification is preferred. Experience with Federal Construction projects, particularly USACE, is preferred. Strong background in Project Management (PM), with the ability to lead and motivate teams to achieve project goals Strong interpersonal and presentation skills are required Strong technical competencies to create presentation materials and deliver presentations via electronic methods. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

This is a full-time hybrid position with weekly on-site expectations. Therefore, the incumbent must live within a reasonable driving distance of the Rochester campus. A Senior Engineer in the Division of Immersive Learning Design is pivotal in inventing, designing, optimizing, and analyzing AR, VR, and MR solutions. The Division of Immersive Learning Design at Mayo Clinic is a pioneering team within the Department of Education, dedicated to transforming medical education through cutting-edge augmented reality (AR), virtual reality (VR), and mixed reality (MR) technologies. The Senior Engineer designs and develops components of biomedical-related engineering systems, applying knowledge of complex principles, theories, concepts, tools and techniques to the design challenges. The candidate will design experiences, interactions, and applications that support effective collaboration within immersive environments. Using existing infrastructure that creates digital twins and 3D patient-specific models, the Senior Engineer will seamlessly integrate them into extended reality (XR) platforms for surgical planning, medical education, research, and the development of XR-enabled medical devices. The Senior Engineer serves as a Technical Lead for Division projects. Provides technical and work direction to project team members and completes technical work as needed. Mentors and coaches other staff as required. Developing skills in one or more engineering disciplines. Developing expertise in the use of unit-specific modeling and analysis tools and techniques. May lead in evaluating new technologies and capital equipment. Has unit-specific expertise in safety risk management. Working to develop expertise in regulatory requirements applicable to his/her unit. Self-starter who functions effectively in a multi-disciplinary development environment. Demonstrated ability to effectively communicate with team members, physicians and health care providers. Possesses effective oral communication and presentation skills. Develops engineering and technical documentation. BS in Engineering or a related field and 5 years of professional engineering experience; Or MS in Engineering or related field and 3 year of professional engineering experience; Or, PhD in Engineering or related field and 1 year of professional engineering experience. Masters or PhD preferred. Authorization to work and remain in the United States, without necessity for Mayo Clinic sponsorships now, or in the future (for example, be a U.S. Citizen, national, or permanent resident, refugee, or asylee). Mayo Clinic does not participate in the F-1 STEM OPT extension program.

**Why Mayo Clinic** Mayo Clinic is top-ranked in more specialties than any other care provider according to U.S. News & World Report. As we work together to put the needs of the patient first, we are also dedicated to our employees, investing in competitive compensation and comprehensive benefit plans (************************************** - to take care of you and your family, now and in the future. And with continuing education and advancement opportunities at every turn, you can build a long, successful career with Mayo Clinic. **Benefits Highlights** + Medical: Multiple plan options. + Dental: Delta Dental or reimbursement account for flexible coverage. + Vision: Affordable plan with national network. + Pre-Tax Savings: HSA and FSAs for eligible expenses. + Retirement: Competitive retirement package to secure your future. **Responsibilities** **This is a full-time hybrid position with weekly on-site expectations. Therefore, the incumbent must live within a reasonable driving distance of the Rochester campus.** A Senior Engineer in the Division of Immersive Learning Design is pivotal in inventing, designing, optimizing, and analyzing AR, VR, and MR solutions. The Division of Immersive Learning Design at Mayo Clinic is a pioneering team within the Department of Education, dedicated to transforming medical education through cutting-edge augmented reality (AR), virtual reality (VR), and mixed reality (MR) technologies. The Senior Engineer designs and develops components of biomedical-related engineering systems, applying knowledge of complex principles, theories, concepts, tools and techniques to the design challenges. The candidate will design experiences, interactions, and applications that support effective collaboration within immersive environments. Using existing infrastructure that creates digital twins and 3D patient-specific models, the Senior Engineer will seamlessly integrate them into extended reality (XR) platforms for surgical planning, medical education, research, and the development of XR-enabled medical devices. The Senior Engineer serves as a Technical Lead for Division projects. Provides technical and work direction to project team members and completes technical work as needed. Mentors and coaches other staff as required. Developing skills in one or more engineering disciplines. Developing expertise in the use of unit-specific modeling and analysis tools and techniques. May lead in evaluating new technologies and capital equipment. Has unit-specific expertise in safety risk management. Working to develop expertise in regulatory requirements applicable to his/her unit. Self-starter who functions effectively in a multi-disciplinary development environment. Demonstrated ability to effectively communicate with team members, physicians and health care providers. Possesses effective oral communication and presentation skills. Develops engineering and technical documentation. **Qualifications** BS in Engineering or a related field and 5 years of professional engineering experience; Or MS in Engineering or related field and 3 year of professional engineering experience; Or, PhD in Engineering or related field and 1 year of professional engineering experience. Masters or PhD preferred. Authorization to work and remain in the United States, without necessity for Mayo Clinic sponsorships now, or in the future (for example, be a U.S. Citizen, national, or permanent resident, refugee, or asylee). Mayo Clinic does not participate in the F-1 STEM OPT extension program. **Exemption Status** Exempt **Compensation Detail** $97,136 - $145,704 / year **Benefits Eligible** Yes **Schedule** Full Time **Hours/Pay Period** 80 **Schedule Details** Monday - Friday; Normal business hours **Weekend Schedule** N/A **International Assignment** No **Site Description** Just as our reputation has spread beyond our Minnesota roots, so have our locations. Today, our employees are located at our three major campuses in Phoenix/Scottsdale, Arizona, Jacksonville, Florida, Rochester, Minnesota, and at Mayo Clinic Health System campuses throughout Midwestern communities, and at our international locations. Each Mayo Clinic location is a special place where our employees thrive in both their work and personal lives. Learn more about what each unique Mayo Clinic campus has to offer, and where your best fit is. (***************************************** **Equal Opportunity** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, protected veteran status or disability status. Learn more about the "EOE is the Law" (**************************** . Mayo Clinic participates in E-Verify (******************************************************************************************** and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. **Recruiter** Pam Sivly **Equal opportunity** As an Affirmative Action and Equal Opportunity Employer Mayo Clinic is committed to creating an inclusive environment that values the diversity of its employees and does not discriminate against any employee or candidate. Women, minorities, veterans, people from the LGBTQ communities and people with disabilities are strongly encouraged to apply to join our teams. Reasonable accommodations to access job openings or to apply for a job are available.

McGough is a respected partner that brings six generations of experience to high profile, unique and complex construction projects. We take great pride in our people and their extraordinary expertise in planning, development, construction and facility management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. VDC PROJECT ENGINEER The VDC Project Engineer supports the execution of Virtual Design and Construction (VDC) activities across assigned projects. This role focuses on supporting VDC Project Managers by learning various VDC roles, maintaining VDC content and standards, and contributing to marketing and estimating efforts as assigned. Qualifications: Required: * Bachelor's degree in Architecture, Engineering, Construction Management, Construction Science, or equivalent AEC industry experience. * Minimum of 2 internship experiences with documentation of overall opportunities and responsibilities assigned. Preferred: * Healthcare Construction experience * Strong understanding of commercial design and construction processes * Basic understanding of the value that BIM and VDC can provide projects. * Familiarity with laser scanning and application of deliverables derived from scan data. * Part 107 certification preferred; experience using drones and associated software to support project documentation. * Exposure to 360 photo platforms and basic understanding of how they can be leveraged in construction. * Familiarity with programming tools such as Dynamo or Python or similar scripting languages. * Proficiency with Adobe Creative Suite is a plus. Skills: * Basic knowledge of construction delivery models, documentation, and sequencing. * Strong understanding of building systems and construction workflows. * Beginner-level experience using Revit and other BIM/VDC software. * Demonstrates curiosity and a commitment to learning new technologies and methodologies that advance BIM, VDC, and LEAN practices. * Self-motivated, detail-oriented, and able to manage multiple priorities effectively. * Strong analytical, problem-solving, and communication skills (written and verbal). Office and Travel: * This position requires that the individual be onsite full-time for the duration of the project in Rochester, MN. Job Responsibilities: * Support VDC Project Managers in the production of VDC deliverables for assigned projects. * Support VDC leaders with updating VDC content libraries and standard work documentation. * Develop 3D models for site logistics, phase planning, virtual mockups, and MEP coordination. * Utilize BIM for visualization, constructability reviews, and design coordination. * Collaborate on the development and implementation of BIM Execution Plans. * Create 2D/3D/4D/5D deliverables using Revit, Navisworks, SketchUp, Bluebeam, Fuzor, and cm Builder per project requirements. * Support and facilitate 3D coordination and clash detection efforts with design teams, subcontractors, and fabricators. * Provide training and technical support to project team members on accessing and using VDC deliverables and BIM tools. * Contribute lessons learned and support continuous improvement across VDC processes. * Perform other duties as assigned. Physical Requirements: The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position involves sitting for extended periods of time at employee's work station and during meetings as well as while traveling, either by plane or car. Employee needs to be able to lift up to 20 pounds as frequently as needed to move objects; dexterity to write and manipulate computer keyboard and mouse; ability to hear and speak clearly; and ability to distinguish between colors on graphs and charts. Occasionally, employee will be required to visit construction jobsites which may expose the employee to dirt, dust, uneven surfaces, outdoor weather conditions and extreme temperatures. * In alignment with our commitment to pay transparency, the base salary range for this position is $77,000- $87,100, excluding fringe benefits or potential bonuses. If you join McGough, your final base salary will be determined by several factors, including geography, location, skills, education, and experience. Furthermore, we place significant value on pay equity among our current team members as part of any final job offer. Please note that the range provided above reflects the hiring range for this role. Hiring near the top end of this range would be atypical, as we aim to allow room for future salary growth. Additionally, McGough offers a comprehensive compensation and benefits package. This includes insurance coverage for medical, dental, vision, life, and disability. We also provide generous retirement plans, voluntary benefit plans, parental leave, substantial paid time off, and holiday pay. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

As a new or recent college graduate at Braun Intertec, you will play a crucial role on our engineering team, contributing to the success of our projects and helping us deliver outstanding results to our clients. Our fast-paced rotation will lead to engineering career opportunities with an emphasis in one or more of the following: Geotechnical engineering Construction inspections and testing oversight Slope stability Deep foundations In situ instrumentation Pavement engineering Bituminous materials Concrete materials Our projects range in all sizes and complexities, including NFL, MLB, and MLS stadiums; interstate highways; municipal and county roadways; light rail transit; bus rapid transit; commercial and multi-family low rise to high rise structures; water and wastewater plants and utilities; in situ assessment of structures and materials. Our full-scale laboratories, drilling operations, and field service experts complement and support our engineering teams. It is our priority to train our diverse engineering staff for future careers. We use a variety of opportunities to build a strong foundation by performing some of the following tasks and analysis, under the supervision and mentorship of licensed engineers: Various field and laboratory tests Work independently on specific assignments of limited scope and with engineers and on larger projects as a team member Prepare proposals for geotechnical and material testing projects Manage basic geotechnical and material testing projects Maintain client communications and build client relations Develop solutions, make recommendations, and prepare engineering reports for review Observe construction in progress and reports to project or senior engineer Gain experience relevant to work toward obtaining Professional Engineer license Qualifications: Bachelor's degree in civil engineering with geotechnical, materials emphasis, or related Possess EIT certification or ability to obtain within 6 months Valid driver's license Ability to perform field related services at least 50% of time during the program field rotation Solid written and verbal communication skills Ability to occasionally lift 50 pounds Ability to travel up to 25% of time Join a dynamic team that delivers exceptional consulting services to our clients! Braun Intertec offers a competitive compensation and benefits package, including medical, dental, vision, life insurance, 401(k) plan, PTO, Employee Stock Ownership Program (ESOP), paid holidays, paid volunteer day, tuition reimbursement, and opportunities for professional growth and development. #LI-JM1 Compensation Range: $48,000.00 - $72,000.00 As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, veteran or disability status. Braun Intertec strives to ensure that its careers web site is accessible to all. If you need assistance completing your online application, please email ************************. As an Equal Opportunity Employer, Braun Intertec is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans. If you need a reasonable accommodation to assist with your job search or application for employment, please e-mail us at ************************. In your e-mail, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Sr DFT Engineer (Tessent/IJTAG Specialist) - Remote Full-time: Salary + Benefits + Bonuses / Contractor Work Status: US citizen or Lawful Permanent Resident. Remote (Anywhere in US) We are looking for a Senior DFT Engineer to architect and implement advanced test solutions. This role focuses on high-level customization of Siemens Tessent flows, requiring deep expertise in ICL/PDL development for non-standard test sequences that go beyond default tool deliverables. Key Responsibilities: Custom Test Sequences: Author and edit ICL/PDL to support unique hardware instruments and complex IP. Tessent Integration: Drive DFT insertion and pattern generation using the Tessent Shell environment. Pattern Engineering: Develop custom ATPG patterns and perform gate-lvel simulations (GLS) to ensure high test coverage. Silicon Debug: Support post-silicon bring-up and failure analysis using custom-engineered test sequences. Required Qualifications: Expert-level experience with the Siemens Tessent tool suite. Proven ability to customize PDL/ICL for non-standard test delivery. Strong background in Scan, ATPG, JTAG, and Hierarchical DFT. Proficiency in Tcl/Python for flow automation. 5+ years of experience with a track record of successful tape-outs. The anticipated annual base salary for this position is between $130,000 to $160,000, which also includes a comprehensive benefits package. Full-Time Benefits: • 15 days of PTO per calendar year • 10 paid Holidays per calendar year • Comprehensive Medical Benefits: Company covers 80% of premiums for Employee and Dependents • Dental & Vision: Company covers 50% of premiums for Employee and Dependents • Voluntary Benefits: Life Insurance, FSA (Health and Dependent, Limited Purpose), HAS, and Gap Insurance • Employee Assistant Program (EAP) • 401k - Traditional & Roth • Life/AD&D and Long-Term Disability • Tuition reimbursement Equal Opportunity Policy Statement Encore Semi, Inc. is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, religion, creed, color, age, sex, sexual orientation, gender, gender identity or expression, national origin, genetics, ancestry, marital status, civil union status, medical condition, disability (mental and physical), military and veteran status, pregnancy, childbirth and related medical conditions, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Encore Semi is also committed to compliance with all fair employment practices regarding citizenship and immigration status.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Working at Knobelsdorff Along with building state-of-the-art projects, we build meaningful careers, lasting opportunities, and teams of dedicated individuals who truly own their work. As a leading turnkey specialty contractor specializing in Automation, Electric, Energy, and Power Services, our team tackles challenging, cutting-edge projects that provide opportunities to build new skills, confidence, and gain valuable hands-on experience in a variety of different industries. We tackle industrial electrical installations, advanced automation systems, and renewable energy solutions. Since our founding as a family-owned company in 1988, we've grown while staying true to our core values. Starting your career with Knobelsdorff means joining a culture that values your contributions, moves quickly, takes calculated risks, and celebrates team members who step up and own their work. If you're ready to join a team where your voice matters, your growth is supported, and your impact is celebrated, Knobelsdorff (KE) is the place for you. Responsibilities Experience working collaboratively on projects while managing project timelines, ensuring completion of projects on time. Knowledge of the design and constructability documentation and practices. Support in the work of designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes. Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment. Assist in the design of electrical systems or portions of electrical systems. Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects. Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps. Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations. Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities. Writing reports and compiling data regarding existing and potential electrical engineering projects and studies. Preparing specifications for purchases of electrical equipment and materials. Engage with the project team and participate in projects from design to construction. Experience with project management and customer relations. Work collaboratively in a team to design and execute complex projects under the direction of the team lead. Foster key strategic relationships with various partners. Ability to integrate and gain technical knowledge to become a reliable source of information to the engineering team. Ability to interface with regulatory agencies and manufacturers/distributors. Manage project files, drawings, documents & records in our database, maintaining confidentiality. Ability to manage multiple complicated tasks and achieve a high level of execution. Willing to work occasional evenings, weekends, and holidays. Willing to travel as job requirement necessitates. Proficiency with Microsoft Office Suite Qualifications Qualifications The requirements listed in job descriptions are guidelines, not fixed rules. You do not have to satisfy every requirement or meet every qualification listed. If you feel you are an excellent candidate, we encourage you to apply! Bachelor's degree in Electrical Engineering, or equivalent education/experience. 1-2 years' experience in Electrical Engineering, or related field. To include experience in proper design and constructability. Good communication skills and a positive attitude. Experience in using or a desire to learn the required software. Knowledge of applicable codes related to electronic engineering. Must be self-motivated and flexible to accommodate changes in KE business strategies Have entrepreneurial approach to problem solving and be accountable for project decisions and actions. Possess and maintain a valid driver's license that represents a history of safe & competent driving. Ability to pass a pre-employment drug screen and criminal background check. Additional Information We believe in paying for the value you bring to the team, and we aim to be competitive in every market we hire in. Pay Range: $80,000 - $135,000/year DOE Total Rewards Statement As a full-time employee at Knobelsdorff, you'll have access to a comprehensive benefits package designed to support your health, wellbeing, and future. 100% employer-paid health and dental coverage for employees HSA contributions to support your medical expenses Company-paid life insurance and disability coverage 401(k) with competitive company match Profit sharing and performance-based incentives Paid weekly with competitive wages PTO, six paid holidays, and education reimbursement Exclusive employee discounts through Working Advantage We believe your work should be rewarded with more than just a paycheck. At KE, we invest in your total wellbeing. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodation may be provided for individuals with disabilities. Typical requirements may include: Must be able to sit, stand, kneel, stoop, walk, and sit for long periods of time Must be capable of lifting and carrying up to 20 lbs Accessibility: If you need accommodations as part of the employment process, please contact Knobelsdorff Human Resources at via email at [email protected] . EEO Statement Knobelsdorff is an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, citizenship, veteran status, or any other protected characteristic under applicable federal, state, or local law. We believe in hiring the best person for the job, period. If you've got the skills, work ethic, and mindset to Own It, you'll find a place here. If you need accommodation during the hiring process, let us know and we'll work with you. Equal Opportunity Employer, including disabled and veterans. EEO is the Law poster English - Spanish EEO is the Law Supplement poster English - Spanish Pay Transparency Policy Statement English #HP0001 Knobelsdorff is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Equal Opportunity Employer, including disabled and veterans. EEO is the Law poster English - Spanish EEO is the Law Supplement poster English - Spanish Pay Transparency Policy Statement English

* Type:Full Time * Salary/Pay Rate:$50,000 - $80,900 Department: Planning/Engineering Hours: 40 per week Union/Mgmt: Mgmt NJCSC Test Required: Yes Grant Funded? No Definition Under direction, performs routine civil engineering work involved in the design, construction, inspection, and maintenance of structures and facilities such as roads, bridges, dams, powerplants, water supply, sewage and waste disposal systems, or similar facilities; does other related work. NOTE: The definition and examples of work for this title are for illustrative purposes only. A particular position using this title may not perform all duties listed in this job specification. Conversely, all duties performed on the job may not be listed. Requirements Note: This position requires a valid New Jersey driver's license. Applicants are required to provide all Engineering Licenses. Education Graduation from an accredited college or university with a Bachelor's degree in Civil Engineering. NOTE: Possession of a Professional engineer's license or an engineer-in-training certificate issued by the New Jersey State Board of Professional Engineers and Land Surveyors may be substituted for the above educational requirement. Experience One (1) year of experience in civil engineering. NOTE: The examples of work for this title are for illustrative purposes only. A particular position using this title may not perform all duties listed in this job specification. Conversely, all duties performed on the job may not be listed. License Applicants are required to provide all Engineering Licenses. Appointees will be required to possess a driver's license valid in New Jersey only if the operation of a vehicle, rather than employee mobility, is necessary to perform the essential duties of the position. Examples of Work * Assists in preparation and review of plans and drawings. * Assists in preparation of as-built plans and other reports. * Assembles and compiles field notes. * Conducts office and field surveys, inspections, investigations, and tests involved with civil engineering projects. * Assists in the preparation of cost estimates of material. * Prepares requisitions for equipment, materials, and supplies. * Prepares reports containing findings, conclusions, and recommendations. * Performs complex mathematical calculations involving trigonometry and calculus. * May oversee field survey parties. * Prepares engineering specifications. * Assists in the design of civil engineering projects. * Performs detail drafting work. * Maintains engineering and related records and files. * Will be required to learn to utilize various types of electronic and/or manual recording and computerized information systems used by the agency, office, or related units. Knowledge and Abilities: * Knowledge of principles of civil engineering. * Knowledge of procedures used to plan and design civil engineering projects such as roadways, walks, and drainage projects. * Knowledge of engineering mathematics. * Knowledge of the methods and techniques used to prepare construction plans. * Knowledge of techniques used to draft and prepare maps and charts. * Ability to prepare engineering plans and drawings. * Ability to inspect construction projects for conformance with designs, plans, and specifications. * Ability to oversee field survey parties. * Ability to inspect and investigate work under construction. * Ability to

Job Description The purpose of the FE4 position is to demonstrate proficiency in servicing equipment with advanced troubleshooting skills while applying excellent customer satisfaction skills. The FE4 will work on a manufacturer's entire black and white and color enabled machines. Essential Duties and Responsibilities: All areas of responsibility listed below are essential to the satisfactory performance of this position, with reasonable accommodation, if necessary. Any non-essential functions are assumed to be included in "other related duties as assigned": Attend and pass manufacturers basic training classes. Exercise and build proficiency in servicing equipment. Learn complete assembly and disassembly procedures in the field or shop. Develop ability to work independently. Learn to logically troubleshoot machine problems utilizing all available resources. Demonstrate proficiency in equipment cleanings and PMs. To maintain, track and protect from damage all car stock and inventory that is issued. Participate with other Technicians in field training. Demonstrate acceptable verbal and written communication skills with customers and other employees. Candidates must possess a valid driver's license, maintain an acceptable driving record, and provide proof of minimum auto insurance coverage as required by state law. Conforms to company guidelines on dress code and personal hygiene. Maintain a safe vehicle with secure storage for parts. Complete all types of paperwork accurately and legibly (timecards, equipment histories, service orders, etc.). Learn and use communication systems with dispatch. Read, be familiar with and maintain Field Engineering bulletins and servicing information. Participate actively in the sales lead program. Assist the sales force in accomplishing their goals through prompt and effective machine service and communication. Learn and follow current procedures for return of parts and assemblies. To act in a polite, professional manner that is beneficial to the reputation of Loffler Companies. Responsible for understanding, staying updated on, and abiding by the Employee Handbook as written. Other related duties as assigned. Qualifications/Requirements: In-office and travel to client sites as required. Independent Judgment/Decision-Making: Exercising good judgment on when to replace prats in a cost-effective manner. Know when to escalate equipment repair challenges to the Specialist or other Senior Service Technicians. Be able to work independently with little supervision. Can think outside of provided information to resolve problems. Effectively prioritize the customer needs and concerns. Prioritize importance of emergency calls, returns, incompletes and parts calls. Allow sufficient travel time for arriving to work on time. Communications/Interpersonal Skills: Shows very effective communication, team building, coaching and persuasion skills. Provides information and deals effectively with issues that are complex, confidential and sensitive in nature. Technical Skills: Can troubleshoot and resolve any electrical or mechanical problem. Can troubleshoot any software problem identified in Manufacturer's documentation. Problem Solving/Critical Thinking: Identifies and resolves complex problems and situations using applicable theories and principles and provides creative solutions. Education/Experience: One of the following is considered acceptable: Associate degree in electronics. Armed forces training in electronics. Vocational electronics/electro-mechanical training program. Previous office equipment repair experience. Supervisory Responsibilities: This position does not have supervisory responsibilities. Work Conditions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employee is regularly required to stand/sit for extended periods of time. Constant bending and lifting is required. Must be able to lift 75lbs. Frequently required to use hands to handle objects, tools or controls. The noise level in the work environment is usually moderate. For information on the physical demands of this job, see Human Resources. The posted range for this position represents a good faith estimate of the minimum and maximum starting compensation for this role. In addition to the base salary, we offer a comprehensive benefits package that includes health and dental insurance, retirement plans, and paid time off. Why Work for Us? Top Workplace Career Advancement Employer Paid Life Insurance and Disability Paid Time Off, Volunteer Time, Holidays, Bereavement, and Parental Leave Benefits Package including FSA, Medical, Dental, and Vision 401K with Employer Match Tuition Reimbursement

About Us At American Engineering Testing (AET), we believe that people are the heart of innovation. We create an environment that values teamwork, curiosity, and continuous improvement while delivering innovative engineering and consulting solutions. As a 100% employee-owned firm, we deliver comprehensive testing, analysis, and design to reduce uncertainty in construction projects and offer rewarding work, exceptional training, and career development opportunities. Job Summary Field Engineer plays a critical role in supporting the Construction Services Division by assisting engineers and technicians with project duties in the field. This position is responsible for supporting engineering projects, performing laboratory testing, and conducting field observation of construction materials, ensuring accurate data collection and reliable project outcomes. The ideal candidate will demonstrate adaptability, technical expertise, and a collaborative mindset, and contribute to the division's mission of delivering high-quality construction services. Essential Duties and Responsibilities Field and Laboratory Work Perform field and laboratory quality control testing of soils in accordance with AET QA/QC procedures and industry standards (ASTM, ASIC, ACI). Conduct geotechnical field testing, soil boring layout/documentation, utility clearance meetings, and surveying. Complete field sampling of materials, including coring and hand auger borings. Operate and maintain specialized equipment such as Ground Penetrating Radar (GPR), Falling Weight Deflectometer (FWD), and Geoprobe sampling units. Log and classify soil samples in the field or laboratory as needed. Assist in training less experienced personnel in routine field work and documentation. Reporting and Communication Prepare detailed reports of field and laboratory work using standard AET forms. Document site observations and maintain accurate job files. Communicate effectively with project managers, clients, contractors, and other project personnel to ensure project requirements are met. Complete tasks in accordance with project quality requirements and deadlines. Compliance and Safety Conduct all activities in compliance with federal, state, and local regulations, as well as AET's QA and Health & Safety Policies. Maintain valid driver's license and acceptable driving record; comply with DOT regulations if required. Maintain appropriate physicals if required for position. Properly use and maintain company instruments and equipment. Additional Responsibilities Assist with laboratory maintenance and improvement efforts. Maintain high chargeable productivity and coordinate with other staff to increase efficiency and communication. Establish and maintain positive business relationships with clients; assist with marketing functions as needed. Frequent travel within regional area; occasional out-of-town travel (up to 75%), nights, or weekends. Perform other duties as necessary to meet departmental and company goals. Required Qualifications and Education Bachelor's degree in Civil, Geological, or related Engineering field. 0-3 years of experience in an engineering or science related field. Preferred Qualifications Engineer in Training (EIT) and ability to achieve professional registration (PE). Internship or previous work experience preferred, but not mandatory. Solid understanding of engineering or scientific principles and ability to apply them in practice. Proficiency with Microsoft Office and basic computer applications. Ability to perform field work at construction or remediation sites, including sampling, operating instruments, following procedures, and documenting activities. Strong communication skills to clearly convey technical information to diverse audiences. Effective teamwork and problem-solving skills; ability to work independently in the field. Physically capable of performing labor-intensive tasks, including lifting 50-100 lbs and conducting hand auger borings. Work Environment This job primarily operates primary in a field environment in outdoor conditions, on construction sites with uneven ground and adverse weather conditions. This role secondary operates in an office environment and uses standard office equipment such as computers, phones, and photocopiers. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands or finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance, and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50-100 pounds. The employee will occasionally push or pull equipment weighing up to 200 pounds. The employee is required to frequently work outside. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Pay Transparency Base compensation is expected to be in the range of $27.00 - $29.00 per hour based on skill set and experience. AET offers a comprehensive benefits package, including health benefits, insurance, Employee Stock Ownership Plan (ESOP), long-term savings, paid time off, and professional development opportunities. The selected candidate must be authorized to work for any employer in the U.S. without requiring visa sponsorship now or in the future. Third Party Disclosure Notice to Third Party Agencies: AET does not accept unsolicited resumes from third party recruiting firms. Absent a signed Service Agreement by AET's Chief People Officer (CPO), AET reserves the right to pursue and hire these candidates without financial obligation to recruiters or agencies.

Trystar is at the forefront of advancing power solutions, charged and driven by a committed, dynamic team, tackling complex challenges, and creating innovative solutions. Safety and integrity aren't just buzzwords. They are the north star guiding us as we aspire to wow our customers every day. We've created power solutions that are not only durable and unique but are also the result of serious teamwork from every corner of our organization. Individually and collectively, every team member at Trystar plays for each other and strives to deliver unmatched value and 100% accuracy to our customers every single day. As a big name and pioneer in power solutions, we're not just part of the power conversation - we're shaping its future, and we're doing so across diverse industry sectors including healthcare, data centers, entertainment, education, government, and commercial construction - just to name a few! We're committed to growing and evolving our product lineup to stay on top of the game and that includes leaning into sustainable, resilient, and renewable energy solutions. Our cutting-edge headquarters in Faribault, MN is partially solar- and wind-powered by our own microgrid! You'll find that we're also pushing boundaries across the country at our additional facilities in Troy, MI; Houston, TX; Merrimack, NH; Burnsville, MN; Murfreesboro, TN; Waukesha, WI; & in Montreal, Canada. Together, we are Trystar, where we power the future and nurture innovation for a brighter tomorrow. Trystar's team members are our most important asset, we are in search of a Staff Engineer - Sustaining Mechanical Engineering to join our team. As part of the engineering team, the Sr. Sustaining Mechanical Engineer will have the opportunity to support and improve maintenance series production products. In this role, you will be responsible to track, troubleshoot and identify root cause and implement engineering changes as well as supporting new product manufacturing introduction in local and across enterprise-wide products. This position reports directly to the Sustaining Engineering Manager. We are looking for people who believe in our guiding principles and values of: Safety - We believe everyone should leave Trystar facilities in the same or better condition than when they arrived. Integrity - We're honest, transparent, and committed to doing what's right. Customer focus - We have relentless focus on our customers and their success. Right with speed - We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity. Play for each other - We're a team. We show up for each other and we know that through teamwork we achieve greatness. Champion change - We know adaptation and improvement are requirements to survive and to thrive. Enjoy the journey - We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: Create, improve and facilitate legacy products engineering documentation, including Bill of Materials (BOM), 3D models and drawings. Conduct root cause analysis to resolve issues and implement corrective actions as part of Trystar's continuous improvement program. Support a smooth handover of new products from engineering to manufacturing by participating in DFM/DFA reviews and ensuring lessons learned adherence. Generate, track and coordinate Engineering Change Orders (ECO) for production collaborating with internal teams. Identify, promote and implement modularity within the product and across different products for design efficiency. Vet new opportunities, and recommend product changes/improvements to enhance product manufacturability and/or reduce cost Job Requirements: BASIC QUALIFICATIONS Bachelor's degree in Mechanical Engineering or an equivalent. 15+ years of experience in manufacturing floor support/product design. Experienced in engineering detailed drawings, and BOM in a high product customization manufacturing environment. Strong problem-solving skills in a fast-paced environment. ADDITIONAL QUALIFICATIONS Highly motivated, fast learner with exceptional attention to detail that thrives in a team environment. Experience with engineering change implementation. Experience with complex electro-mechanical assemblies in SolidWorks or other CAD system. Sheet metal part design and fabrication experience. Experience with electromechanical systems; familiar with electrical schematics, symbols, and basic electrical theory. Implementing ASME Y14.5 and GD&T standards to drawings identifying critical dimensions according to tolerance stack analysis and manufacturing processes capabilities. Experience with ERP, PLM and Engineering Vault software (PDM). DFM/DFA and New Product Introduction experience. Attention to details, and hands-on support to manufacturing. Support manufacturing defining corrective and preventive actions and ensure enterprise-wide adherence of best practices and lessons learned Up to 10% travel to different Trystar locations, suppliers and/or customers. Work in accordance with all company policies and procedures regarding employment, safety, quality, product safety and legality, security, and regulatory compliance, as applicable. Passion for Trystar, its culture, and a commitment to deliver on its growth, performance, and operational metrics

Project Engineer ***Work Location: Cavalier SFB (Cavalier, ND)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for overseeing all aspects of construction projects, from planning to execution and closeout. Managing and overseeing project plans, schedules, and budgets Coordinating with architects, engineers, and contractors to ensure project milestones are met; serving as a primary point of contact for clients and stakeholders, communicating project progress, issues, and resolutions effectively Performing documents review of contract documents for schedule compliance and reasonability. Identifying potential risks and developing mitigation strategies; ensuring compliance with legal and regulatory requirements Implementing quality control measures to ensure work meets specifications and standards Conducting regular inspections and audits to identify and address quality issues Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Assisting with hosting site visits and giving presentations to owner's representatives. Providing guidance, mentoring, and training to team members; overseeing contract negotiations, administration, and compliance, resolving disputes and issues related to contracts Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Produce monthly project reports displaying project status and updates for customers Participates in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and prepares contract modification documentation. Attend and participate in meetings with customers and contractors. Performs other duties as assigned Education/Experience: Bachelor's Degree in Engineering, Construction Management, Architecture, or related field Minimum 10 years Construction Project Management experience PMP certification is preferred. Experience with Federal Construction projects, particularly USACE, is preferred. Strong background in Project Management (PM), with the ability to lead and motivate teams to achieve project goals Strong interpersonal and presentation skills are required Strong technical competencies to create presentation materials and deliver presentations via electronic methods. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

This is a full-time hybrid position with weekly on-site expectations. Therefore, the incumbent must live within a reasonable driving distance of the Rochester campus. A Senior Engineer in the Division of Immersive Learning Design is pivotal in inventing, designing, optimizing, and analyzing AR, VR, and MR solutions. The Division of Immersive Learning Design at Mayo Clinic is a pioneering team within the Department of Education, dedicated to transforming medical education through cutting-edge augmented reality (AR), virtual reality (VR), and mixed reality (MR) technologies. The Senior Engineer designs and develops components of biomedical-related engineering systems, applying knowledge of complex principles, theories, concepts, tools and techniques to the design challenges. The candidate will design experiences, interactions, and applications that support effective collaboration within immersive environments. Using existing infrastructure that creates digital twins and 3D patient-specific models, the Senior Engineer will seamlessly integrate them into extended reality (XR) platforms for surgical planning, medical education, research, and the development of XR-enabled medical devices. The Senior Engineer serves as a Technical Lead for Division projects. Provides technical and work direction to project team members and completes technical work as needed. Mentors and coaches other staff as required. Developing skills in one or more engineering disciplines. Developing expertise in the use of unit-specific modeling and analysis tools and techniques. May lead in evaluating new technologies and capital equipment. Has unit-specific expertise in safety risk management. Working to develop expertise in regulatory requirements applicable to his/her unit. Self-starter who functions effectively in a multi-disciplinary development environment. Demonstrated ability to effectively communicate with team members, physicians and health care providers. Possesses effective oral communication and presentation skills. Develops engineering and technical documentation. BS in Engineering or a related field and 5 years of professional engineering experience; Or MS in Engineering or related field and 3 year of professional engineering experience; Or, PhD in Engineering or related field and 1 year of professional engineering experience. Masters or PhD preferred. Authorization to work and remain in the United States, without necessity for Mayo Clinic sponsorships now, or in the future (for example, be a U.S. Citizen, national, or permanent resident, refugee, or asylee). Mayo Clinic does not participate in the F-1 STEM OPT extension program.

We are seeking a Manufacturing Engineer who will play a pivotal role in developing detailed work instructions and visual aids for product assembly. This position requires collaboration with production operators and technicians to establish manufacturing standards, methods for inspection, testing, and product qualification. Responsibilities + Develop detailed work instructions and visual aids for product assembly. + Interface with production operators and technicians to establish manufacturing standards and methods for inspection, testing, and product qualification. + Interpret technical documentation related to product manufacturing and acceptability, such as schematics, engineering drawings, customer-controlled specifications, and military/industry standards. + Support the implementation of all key matrices by recording, summarizing, and presenting data/information to department operations. + Monitor trends in quality data, execute corrective actions, and identify continual improvement opportunities in response to product and process failures. + Drive the optimization of process efficiency and effectiveness through collaboration with production operators, supervisors, and technicians by utilizing effective root cause and corrective action analysis. Essential Skills + Bachelor's Degree in a related discipline preferred. + 1+ years of experience within a manufacturing engineering-related role. + Proficiency in manufacturing engineering. + Expertise in root cause analysis and process improvement. + Experience in lean manufacturing. + Solidworks proficiency. Additional Skills & Qualifications + Continuous improvement experience. + Knowledge of manufacturing processes. Work Environment You will report to the Manufacturing Engineering Manager and work within a team of engineers and technicians. Our company is a leader in connectors and cables for fiber optics, supporting regulated environments such as government, aerospace, defense, medical, and industrial sectors. This position requires U.S. citizenship as it supports regulated environments. We foster a culture of growth, promoting from within, and offering a tuition reimbursement program once direct with our organization. Job Type & Location This is a Permanent position based out of Owatonna, MN. Pay and Benefits The pay range for this position is $60000.00 - $70000.00/yr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Owatonna,MN. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.