Engineer jobs in Westland, MI - 3,121 jobs

*PLEASE NOTE-- ONLY CANDIDATES RESIDING IN THE METRO-DETROIT AREA WILL BE CONSIDERED FOR ROLE** Jomar Valve, a manufacturer and distributor of innovative plumbing, industrial and HVAC components is seeking an Engineer to support the technical team. The successful candidate would possess education and early job experience in the Mechanical Engineering Field.The Product Engineering team consists of engineering and quality departments as we strive to be team-oriented to support all divisions at Jomar. Responsibilities: Develop and maintain technical documentation Provide technical support to inside/outside sales Request and document models and drawings from vendors Create spec sheets for our products consisting of CAD drawings, dimensions, specs, etc. 3D modeling using SolidWorks Request and document applicable certifications Serve as the secondary quality support for root-cause, resolution, and continuous improvement Hands on support for warehouse, New Building expansion, and special projects Job Requirements: Bachelor's Degree in Mechanical Engineering A minimum of 1-3 years' experience Educational or practical knowledge of plumbing and HVAC systems preferred Hands-on learner with strong technical and mechanical aptitude Ability to work comfortably with hand tools and power tools Computer Program proficiencies: Strong Excel skills, SolidWorks, Revit Attention to detail and accuracy Strong organizational skills and ability to multi-task Ambitious nature, independent thinker, self-starter Excellent interpersonal skills with team members and clients Customer Service Focus Strong problem solving and data analysis Desire to learn and drive for results Thank you for your interest, but we are not working with external recruiters or agencies for this role. Please refrain from reaching out regarding this position. Jomar Valve is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Our client has a full-time opening for a Senior Mechanical Engineer to join our Mechanical Engineering team. This position can be based in either our Farmington Hills, MI or Toledo-Maumee, OH office. The Senior Mechanical Engineer will provide technical leadership and project oversight on complex projects within the healthcare and higher education markets, with additional exposure to industrial and municipal projects. This role requires a self-motivated professional with strong leadership, planning, and communication skills who can serve as a trusted client partner while mentoring and developing junior staff. Desired Education Bachelor of Science degree in Mechanical Engineering from an ABET-accredited program. Desired Job Experience Minimum of 10 years of experience in the Architectural/Engineering (A/E) consulting business. Licensed Professional Engineer (PE). Demonstrated experience leading mechanical design efforts for healthcare or higher education projects; industrial or municipal experience a plus. Ability to lead and manage mechanical design teams through all phases of project delivery. Experience acting as a project manager or engineering lead, including managing budgets, schedules, and work assignments. Proven ability to serve as the primary client contact with strong communication and organizational skills. Experience pursuing new work, developing client relationships, preparing proposals, and participating in interviews. Proficiency with Revit Building Information Modeling software. Proficiency with Microsoft Office products. Demonstrated ability to mentor and support the development of junior staff. Strong coordination skills across architectural, structural, electrical, and civil disciplines.

Hi, Hope this email finds you well. I have a job position; see below if you would like to consider replying back to me with your resume. Job Title: HIL Dspace Engineer Client: Cognizant Duration: Long-Term Job Description We are looking for a HIL Dspace Engineer to support automotive embedded systems development and validation. The ideal candidate will have hands-on experience with Hardware-in-the-Loop (HIL) systems and Dspace tools, along with strong debugging and testing skills. Key Responsibilities Work on automotive embedded systems development and testing Develop, execute, and maintain test cases for ECU functions Perform HIL testing using Dspaceplatforms Support model-based development and validation activities Analyze issues, perform debugging, and report defects Collaborate with cross-functional teams to resolve technical issues Follow automotive standards and development processes Required Skills & Experience 2-3 years of experience in automotive embedded systems Hands-on experience with HIL systems Strong experience with Dspace tools Experience in ECU testing and validation Knowledge of automotive standards and processes (preferred) Good communication and teamwork skills

How to Apply To apply for this position, please visit this link: Include a copy of your resume and cover letter (combined as a single file, with your cover letter as the first page). Making sure you fit the guidelines as an applicant for this role is essential, please read the below carefully. In your cover letter, please describe how your experience aligns specifically with the responsibilities and collaborative nature of the Member Solutions Engineer & Insights Analyst position at Merit Network, Inc. Click the "Apply Now" button to begin the application process. Your salary will be determined by your qualifications, experience, and education. Job Summary *This is a full-time, hybrid position. During your 6-month probationary period, you will be required to work on-site for at least 3 days per week at Merit's office location in Ann Arbor, MI. Following, working on-site will be required for a minimum of 2 days per week. Come join a team of passionate individuals at a non-profit serving Michigan's public Universities and Colleges, K-12 EDU, Libraries, Governmental, Healthcare, Tribal and other Michigan Non-profit organizations for over 59 years! You will be an integral part of the Merit team, a dynamic and innovative team member, ready to contribute to and execute the mission of Merit. This position reports to the Director of Member Engagement and is responsible for working independently and as an interdisciplinary resource within Merit to respond to customer inquiries, create or identify solutions to meet differentiated solution designs, and identify evolving solution design trends and service delivery options. Merit's Services Lines consist of Network Services, Hosted Infrastructure, Hosted Applications and Community Development and Support. xevrcyc You will have an important role working in an interdisciplinary fashion to execute initiatives across the organization with Member Engagement, Network Operations/Engineering, Outside Plant, and Product Development on key existing and potential Member organization's needs; supporting strategy and business development, service solutions, and service development. To learn more about Merit Network, please visit our website:

Looking for Product Engineer CAD Software/ CATIA, Siemens NX BIW or Body Closure Systems (doors, hoods, tailgates, etc.)

Role: Design Engineer - Automotive Interior Duration: 6+ months Requirements: 6-8 Years exp with automotive interior designing Familiar to work with CATIA V5 and NX Experiences in automotive field especially about interior product design such as HMI components etc. Intermediate Mechanical design skill Able to work in customer premises Able to work from Client location Preferably locals.

Follow and deliver Feature Assurance Engineering (FAE) deliverables Vehicle architecture experience in one of these areas: Battery Management & Charging Climate Control / HVAC Instrument Cluster / Infotainment System Powertrain and Driveline Connected Vehicle Digital Keys Enclosure Seat Controls and Passive Restraints Level of Changes alignment and Signoff with Feature System Engineer (FSE) counterpart. Lead milestone feature signoff process in partnership with counterpart FSE. Develop feature validation plan including functional, performance, Functional Safety V&V, Cybersecurity and regulatory requirements as applicable. Including the selection of test cases, testing environment (i.e. Breadboard, HiL, vehicle), confirming testing facility/resources (i.e. tester, HiL, vehicle, etc.) and timing in alignment with program milestones expectation (i.e. 1st full pass prior to PEC, etc.) Determine Software and Hardware pedigree required to complete validation. Provide tester teams with test cases, software and hardware pedigrees and any additional information needed to complete validation. Coordinate Feature Validation Plan execution and support Lead triaging and issues resolution during the entire feature development cycle. Assess test results to ensure compliance with test/requirements passing criteria. Identify, assess (P-rating and Criticality Prioritization Number), document (i.e. JIRA defect ticket) and develop/lead resolution plan for test results defects in alignment with New Model Launch timing guidelines. Lead the feature validation report creation, ensuring that it meets the highest standard of signoff criteria. Review test results and report with corresponding FAE supervisor to complete signoffs. Review and complete feature VSCS (Vehicle Specific Configuration Specification) signoffs as applicable by milestone. Develop and lead DRP (Deliverable Recovery Plan) approval as needed (i.e. P0/P1 defects at FEC milestone) for non-conformance signoffs. Lead Voice of the Customer / AIM feature issues resolution in alignment with New Model Launch timing guidelines. Create, access and maintain JIRA tickets throughout the entire feature lifecycle (development and production) assigned to Feature Assurance Engineering. Identify opportunities to enhance the robustness of feature signoff validation testing and process. Assist FSEs to develop, maintain, and improve test cases. Lead the triaging and resolution of feature quality issues in the field. Develop negative test cases and Feature Assurance Test Procedures including stress testing to address multi-interface conflicts, edge case, and unexpected I/O conditions. Maintain a real-time, comprehensive open issue list within Jira, ensuring accurate categorization, detailed descriptions, and clear assignment. Regularly review, track, and provide detailed progress reports on all open issues to relevant stakeholders (e.g., weekly status meetings, bi-weekly program reviews). All test results and supporting engineering artifacts (e.g., CAN logs, Bus Queries, diagnostic traces, video recordings) must be consistently uploaded and linked within Jira for full traceability and analysis Proactively communicating task progress and status to designated leaders through specified channels (e.g., JIRA), creating and maintaining Jira Dashboards as applicable, clearly, concisely, and effectively communicating complex technical systems, identified issues, and proposed resolutions to diverse audiences, including engineering teams, program management, and leadership. This includes preparing and delivering technical presentations, written reports, and contributing to decision-making processes. Requires BS in Engineering

Works independently and in support of Project Managers in designing and implementing Heating, Ventilation and Air Conditioning (HVAC) projects. Initiates project scope process, developing preliminary design, engineering schedules, cost estimates, and qualitative and quantitative risk assessments. Authorizes preliminary project scope reviews, scope definitions, and estimates. Chairs regular update meetings for leadership on scope, budget, engineering costs, schedules, and estimates for engineering design. Works with Facilities leadership and front-line employees to gain alignment and approval for designs. The Successful candidate will be responsible for executing multiple projects at the same time ranging from tens of thousands of dollars to less than ?5 million dollars. Key Accountabilities: Primary interface and liaison to resolve engineering design problems. Directs project scoping process, develops preliminary schedule (design engineering) and cost estimates, conducts qualitative and quantitative risk assessment. Works on a project team with proper skill sets for preliminary estimating, risk identification, and organizational planning. Authorizes and forwards preliminary project scope review, scope definition, and estimates to Project Manager. Ensures design schedule is on target and monitors engineering costs. Chairs all scope meetings and provides updates of design status. Works with Project Manager to submit and evaluate bid packages for projects. Proficient with HVAC controls design, engineering and application. Support Facilities Operations troubleshooting of HVAC system and controls issues for existing assets within the portfolio. Updates to HVAC and Building Automation System (BAS) standards. Minimum Education & Experience Requirements: Bachelor's degree in Mechanical Engineering and 10+ years of job-relevant experience. Preferred: Licensed Professional Engineer (P.E.) Working experience of BAS control system design, engineering and application. Experience with Building Information Modeling (BIM), Autodesk Construction Cloud (ACC) and/or Revit. Working experience of Niagra Tridium BAS. PMI/PMP (Project Management Institute) certificate. Other Requirements: Ability to apply project planning & implementation and/or continuous improvement principles (typically acquired through several years of experience in these areas) to affect tangible, positive outcomes. Competent in multitasking (i.e the ability to prioritize & manage multiple tasks, issues or projects that may include high visibility initiatives and require innovation, teamwork & planning). Ability to conduct organized, efficient meetings & manage the meeting process with optimal results. Flexibility & the ability to work with shifting priorities; embrace new/evolving responsibilities. Copes with multiple demands from superiors, and/or subordinates & peers in a positive and fair fashion; displays a calm demeanor under pressure. Initiates new ideas and approaches; challenges orthodox practices & approaches with reasonably sound alternatives. Broad understanding of building HVAC and control systems. Advanced analytical and project management skills. Consulting and influencing skills consistent with the ability to build relationships and influence parties; may include getting parties to embrace changing expectations and initiatives Additional Notes: Incumbents may engage in all or some combination of the activities/accountabilities and utilize a variety of the competencies cited in this description depending upon the organization and role to which they are assigned. This description is intended to describe the general nature and level of work performed by incumbents in this job. It is not intended as an all-inclusive list of accountabilities or responsibilities, nor is it intended to limit the rights of supervisors or management representatives to assign, direct and control the work of employees under their supervision.

About the Role: We are seeking a Mechanical Engineer with extensive experience in commercial building HVAC and control systems. The ideal candidate has a strong track record in designing, implementing, and optimizing HVAC systems for commercial environments, with less focus on automotive applications. You will play a key role in ensuring the efficiency, reliability, and sustainability of our building systems. Key Responsibilities: Design, analyze, and optimize HVAC systems for commercial buildings, ensuring compliance with industry standards and building codes. Develop and implement building control systems for energy efficiency, comfort, and system integration. Conduct performance evaluations, troubleshooting, and preventative maintenance planning for HVAC systems. Collaborate with architects, contractors, and other engineering disciplines to ensure seamless project execution. Prepare technical documentation, specifications, and reports for internal and client use. Mentor junior engineers and provide technical guidance on complex mechanical systems. Stay updated with emerging technologies and industry trends in commercial building systems. Qualifications: Bachelor's degree in Mechanical Engineering or related field (Master's preferred). Strong knowledge of HVAC design principles, building codes, and control systems. Proficiency with CAD software, energy modeling tools, and building automation systems. Excellent problem-solving, communication, and project management skills. Automotive industry experience is a plus but not the primary focus.

Title: Project Engineer Duration: 2 years of Contract Shift: Hybrid Works independently and in support of Project Managers in designing and implementing Heating, Ventilation and Air Conditioning (HVAC) projects. Initiates project scope process, developing preliminary design, engineering schedules, cost estimates, and qualitative and quantitative risk assessments. Authorizes preliminary project scope reviews, scope definitions, and estimates. Chairs regular update meetings for leadership on scope, budget, engineering costs, schedules, and estimates for engineering design. Works with Facilities leadership and front-line employees to gain alignment and approval for designs. The Successful candidate will be responsible for executing multiple projects at the same time ranging from tens of thousands of dollars to less than ?5 million dollars. Key Accountabilities • Primary interface and liaison to resolve engineering design problems. • Directs project scoping process, develops preliminary schedule (design engineering) and cost estimates, conducts qualitative and quantitative risk assessment. • Works on a project team with proper skill sets for preliminary estimating, risk identification, and organizational planning. • Authorizes and forwards preliminary project scope review, scope definition, and estimates to Project Manager. • Ensures design schedule is on target and monitors engineering costs. • Chairs all scope meetings and provides updates of design status. • Works with Project Manager to submit and evaluate bid packages for projects. • Proficient with HVAC controls design, engineering and application. • Support Facilities Operations troubleshooting of HVAC system and controls issues for existing assets within the portfolio. • Updates to HVAC and Building Automation System (Client) standards. Minimum Education & Experience Requirements • Bachelor's degree in mechanical engineering and 10+ years of job-relevant experience. Preferred · Licensed Professional Engineer (P.E.) · Working experience of Client control system design, engineering and application. · Experience with Building Information Modeling (BIM), Autodesk Construction Cloud (Client) and/or Revit. · Working experience of Niagra Tridium Client. · PMI/PMP (Project Management Institute) certificate. Other Requirements • Ability to apply project planning & implementation and/or continuous improvement principles (typically acquired through several years of experience in these areas) to affect tangible, positive outcomes. • Competent in multitasking (i.e the ability to prioritize & manage multiple tasks, issues or projects that may include high visibility initiatives and require innovation, teamwork & planning). • Ability to conduct organized, efficient meetings & manage the meeting process with optimal results. • Flexibility & the ability to work with shifting priorities; embrace new/evolving responsibilities. • Copes with multiple demands from superiors, and/or subordinates & peers in a positive and fair fashion; displays a calm demeanor under pressure. • Initiates new ideas and approaches; challenges orthodox practices & approaches with reasonably sound alternatives. • Broad understanding of building HVAC and control systems. • Advanced analytical and project management skills. • Consulting and influencing skills consistent with the ability to build relationships and influence parties; may include getting parties to embrace changing expectations and initiatives Incumbents may engage in all or some combination of the activities/accountabilities and utilize a variety of the competencies cited in this description depending upon the organization and role to which they are assigned. This description is intended to describe the general nature and level of work performed by incumbents in this job. It is not intended as an all-inclusive list of accountabilities or responsibilities, nor is it intended to limit the rights of supervisors or management representatives to assign, direct and control the work of employees under their supervision

Starfish Computer Corporation's Managed Services Engineer (Level 3) is responsible for the on-going and continuous operation of our clients' Information technology environments.Highly trained and certified, the Engineer, Level 3, is an expert in infrastructure technologies including networking (switching, routing, command lines, dynamic / static routes), security, servers and domains, virtualization, data storage and recovery. The Engineer, Level 3, is assigned as the primary person to oversee and own all technical aspects of the assigned clients' environments and projects. They work in concert with Starfish Computer Corporation's internal Help Desk and technical resources (with dedicated Level 1 and Level 2 support), the client's own on-site support technicians (if any), and other Starfish team members to deliver managed services offerings and project executions to our clients that are “best in class”. Job Functions & Responsibilities: Install, configure, monitor, and maintain network equipment, including routers, switches, and firewalls, across multi-vendor environments (Cisco IOS and HPE Aruba). Design, implement, and manage IP addressing schemes, including subnetting and supernetting, to optimize network performance and security. Configure and manage VLANs to segment network traffic, enhance security, and improve network efficiency. Routing & Switching: Implement and troubleshoot both static and dynamic routing protocols (e.g., OSPF, BGP, EIGRP) to ensure efficient data flow and high availability. Troubleshooting & Resolution: Monitor network performance, identify issues, and troubleshoot complex network problems using various tools and techniques (e.g., packet captures, CLI tools). Manage, support, install and upgrade Microsoft servers in physical and virtual environments. Optimize the client's service offering including Microsoft platforms, IP networking, telephony platforms, storage and data protection and recovery, mobile devices, servers, laptops, desktops, virtualization. Coordinate efforts on behalf of assigned clients between themselves, client support teams and Starfish internal resources. Act as the lead technical resource for assigned managed services clients. Ensure that the client environment is comprehensively documented and keep Starfish internal management systems up-to-date. Create preventative maintenance plans with detailed instructions that Level 1 and Level 2 engineers can reliably execute - either remotely or at client site. Work directly with Level 1 and Level 2 engineers to identify and resolve potential or on-going problems. Recommend capacity and performance plans for assigned client environments. Evaluate and schedule appropriate response to scheduled or unscheduled outage notifications. Coordinate and manage upgrades or changes in the client's environment. Determine root cause analysis of service outages and complete or coordinate resolutions. Documents, tracks, and monitors all incoming service requests to completion Assists in the preparation of client and prospect proposals and project plans including timeframes, budget estimates (time) and project milestones Be the lead technical resource for the assigned clients' projects while maintaining a balance between the roles of project manager and technical advisor Ensures personally that all support tickets classified as P2 or P1 have been resolved Completes and closes out service orders within service ticket application General Requirements & Information: Working locations include a mix of the office (in-office work is required during on-boarding period), remote and client locations. This is a hybrid position once on-boarding activities have been completed. Full-time position Competitive salary and benefits package Ability to travel locally to various client locations Participate in an on-call support rotation (current rotation is once every eight (8) weeks) Technical Requirements, Skills & Experience: Two years of on-site client experience or MSP experience 5-7 years of experience in IT support, customer service, help desk, or call center operations working in a multi-customer environment In-depth knowledge of Cisco IOS and/or Aruba AOS/Aruba CX operating systems. Strong understanding of networking principles and protocols (TCP/IP, DNS, DHCP). Expertise in IP subnetting, supernetting, and VLAN configurations. Proficiency in configuring static routes and dynamic routing protocols. Active Directory, 0365, VMware and/or Hyper-V skills and integration experience Experience supporting MS Windows Server, MS Exchange and MS SQL Experience with Watchguard (preferred) or related firewalls Demonstrable experience with vendor management Working knowledge of infrastructure monitoring tools Creates and maintains network and system documentation Strong technical troubleshooting and communications skills Excellent client relationship management skills Cisco CNA or Cisco CCIE preferred, but not required. CompTIA A+, Network+, and Security+ preferred, but not required. MCITP, MCSE certification a plus 4-year degree or equivalent work experience

• Develop powertrain and HV system requirements and validation plans for BEV systems, including e-propulsion, HV battery system, HV harnesses and distribution system, HV auxiliary systems, and BEV thermal management system • Lead the controls system integration efforts for various electric powertrain components such as the Drive Unit, HV battery and the Vehicle Control Module • Develop and own the BEV controls system related features and work with the hardware, software, architecture, safety and other cross-functional teams to deliver features • Develop detailed controls interface, communication topology and E/E interface for various electrical powertrain components and electric vehicle integration • Support the development of controls system test plan and verification of system level functions for electric vehicle • Lead the cross-functional development efforts and manage issue escalation & resolution • Participate in architectural, controls software, system integration and V&V technical discussions and develop technical solutions while representing the BEV function area Skills • Bachelor's Degree in Mechanical Engineering, Electrical Engineering or related discipline • 5 plus years' experience in automotive control system or related discipline • 3 plus years' experience in electric vehicle or electrical propulsion • Excellent verbal and written communication skills Skills • M.S. in Electrical Engineering, Computer Engineering, Embedded Systems • Proven technical expertise in Battery electric vehicle, electrified powertrain and HV Li-ion battery • Proficiency in fundamentals of embedded systems design, CAN network and real-time control systems • Proficiency in control and calibration tools for automotive control systems • An eagerness to work cross-functionally in a dynamic environment where you are part of a high performing team • Willingness to travel approximately 10% of the time

Automotive Hardware in the Loop (HIL) Validation Engineer Max Rate: $30/hr.w2 • Must Have Skills: Manual/Automated Testing, Dspace Tools, MATLAB / Simulink, Test Design, Test Execution JD: • Hands on validation experience as a Test Engineer for various Automotive domains like Body, Chassis, Infotainment, Instrument Cluster, ADAS etc. • Experience in Hardware in Loop (HIL), Manual/Automated Testing, Functional and Regression Testing (Black Box and White Box testing) using Dspace Tool chain like System Desk, Control Desk and Automation Desk. • Should be able to write reusable test plans for component, Subsystem and system level validation • Involved in Requirements Analysis, Test Scenarios Creation, Test Execution, Review of the Test Cases, analyzing the test result discrepancies and resolving them by debugging. • Experience in CAN Protocol Validation, Diagnostics Validation, Knowledge and hands on experience in UDS services, and testing scenarios like Fault Handling, Fault Injection, Network Validation, Message Maps, network Latency etc. • Model Based Knowledge using MATLAB Simulink, Stateflow and Plant Modeling experience to be able to use the available plant models for validation and update them as required • Good knowledge about SDLC (Software Development Life Cycle) preferably the V cycle.. • Experience in defect life cycle management and Requirement management tools. • Should be self driven, Disciplined and willing to learn and contribute in Test Automation using Python • Nice to have: Python, Test Automation, ECU Test etc.

Responsibilities: Bachelor of Science in Mechanical Engineering with a minimum of 3 years of experience in automotive Interior system Thorough knowledge of engineering design & development concepts of automotive Interior system Good Working experience as Design engineer in interior engineering Very good proficiency in CATIA V5. Prepare and execute design release in the 3DExperience PLM system. Experience in design and development of Floor Colsole, and Instrument panel, Ability to resolve design related issues in the manufacturing plant Relevant experience in Master Sections, Vehicle Integration, Vehicle packaging, Concept creation, assembly processes of various Interior assemblies. Knowledge and understanding of Tooling and manufacturing processes Prepare and maintain engineering release and change documentation Lead design FMEA studies and GD.

City Detroit State/Province Michigan Country United States Department PROFESSIONAL SERVICES Date Thursday, October 30, 2025 Working time Full-time Ref# 20036614 Job Level Specialist Job Type Experienced Job Field PROFESSIONAL SERVICES Seniority Level Mid-Senior Level Currency USD - United States - US Annual Base Salary Minimum 91,800 Annual Base Salary Maximum 183,600

Job description: A Senior Design Engineer leads and executes complex design projects, ensuring that products or systems meet technical specifications, quality standards, and customer requirements. This role involves advanced design and analysis, project management, mentorship of junior engineers, and collaboration with cross-functional teams. A Sr. Design Engineer will have the ability to work autonomously, with little guidance, but also collaborate with the team. The ability to conceptualize and design based on customer requirements and stand behind his/her design. Job responsibilities: Design advanced automation equipment using 3D software from concept through final design including 2D drawings for manufacture and build Plan the release of designs to ensure timely delivery and alignment with project timelines Verify equipment designs and identify opportunities for improvement to enhance functionality and efficiency Work with cross functional team to implement all controls requirements, simulation requirements, and safety requirements Perform engineering analysis to ensure design meets the requirement of the application Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Develop comprehensive plans for design timing, monitor progress, conduct thorough reviews, and provide effective solutions for any arising issues Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Provide cross-functional leadership to drive technical tasks to successful completion Create and execute test plans to evaluate system performance and address any issues encountered during testing Conduct root cause analysis (RCA) and problem-solving to resolve engineering and technical issues efficiently Ability to travel to customer site and troubleshoot and find solutions for assembly issues and process issues Ability to travel up to 25% Minimum Requirements: 5+ years of experience Bachelor's degree in mechanical engineering Extensive experience in mechanical design engineering, with a proven track record of successful projects and innovations Proficiency in CAD software such as SolidWorks, AutoCAD, or similar, with advanced skills in 3D modeling, assembly design, and drawing creation Strong understanding of mechanical engineering principles and design standards, with expertise in statics, dynamics, thermodynamics, and materials science

Job Title: Sr. Design Engineer Job description: A Senior Design Engineer leads and executes complex design projects, ensuring that products or systems meet technical specifications, quality standards, and customer requirements. This role involves advanced design and analysis, project management, mentorship of junior engineers, and collaboration with cross-functional teams. A Sr. Design Engineer will have the ability to work autonomously, with little guidance, but also collaborate with the team. The ability to conceptualize and design based on customer requirements and stand behind his/her design. Job responsibilities: Design advanced automation equipment using 3D software from concept through final design including 2D drawings for manufacture and build Plan the release of designs to ensure timely delivery and alignment with project timelines Verify equipment designs and identify opportunities for improvement to enhance functionality and efficiency Work with cross functional team to implement all controls requirements, simulation requirements, and safety requirements Perform engineering analysis to ensure design meets the requirement of the application Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Develop comprehensive plans for design timing, monitor progress, conduct thorough reviews, and provide effective solutions for any arising issues Design systems integration concepts to ensure seamless operation and compatibility Prepare and evaluate budgetary considerations and stack-up analysis for projects Provide cross-functional leadership to drive technical tasks to successful completion Create and execute test plans to evaluate system performance and address any issues encountered during testing Conduct root cause analysis (RCA) and problem-solving to resolve engineering and technical issues efficiently Ability to travel to customer site and troubleshoot and find solutions for assembly issues and process issues Ability to travel up to 25% Minimum Requirements: 10+ years of experience Bachelor's degree in mechanical engineering Extensive experience in mechanical design engineering, with a proven track record of successful projects and innovations Proficiency in CAD software such as SolidWorks, AutoCAD, or similar, with advanced skills in 3D modeling, assembly design, and drawing creation Strong understanding of mechanical engineering principles and design standards, with expertise in statics, dynamics, thermodynamics, and materials science Reports to : Vice President Global Engineering

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognitions --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description • Drive performance and reliability, including developing testing plans and applying reliability frameworks across full stack deployments. • Develop and support tools to support current and future products in a SaaS environment . • Applying GE Digital UX standards to tools and dashboards where applicable, and ensuring well designed usable tools and APIs. • Lead the implementation of application performance monitoring and trend-based scaling for current and future products. • Participate in the domain technical and business discussions relative to future architect direction. • Responsible for executing build and release strategy for highly complex parallel and concurrent releases for Software Products in support of Predix Field Agent. • Enhance and support multiple cloud-based customer environments, deploying continuous integration framework used across teams. • Understand, design, and deploy full stack (Infrastructure, applications, DB, middleware, networking). • Participate in the EA (Enterprise Architecture) governance model. • Writes code using programming as well as scripting languages for automation, monitoring, and integrations. • Experience with CHEFDK, including cookbooks, compliance, delivery. Qualifications • Proven troubleshooting and communication skills • Proven experience Windows and Linux OS • Proven skill at developing User Interfaces • Practical knowledge of networking protocols and development • Knowledge of WMI, and experience developing tools to leverage it • Experience analyzing and resolving performance issues with event-driven programs and databases. • Experience with software integrations (MES to ERP, for example) • Experience building and consuming RESTful services • Understands technical and business discussions relative to future architecture direction aligning with business goals. • Understands change management strategies • Familiar with elements of gathering architecture requirements. • Understands architecture standards concepts to apply to project work. • Experience with ServiceNow • Professional experience as a windows or Linux server admin • Practical experience for J2EE, Apache, Fuse, SSO Integration technologies, Reverse Proxies, Thingworx • Experience with monitoring tools into all layers of cloud solutions (infrastructure, application, DB, Middleware, network, etc) • SQL DBA experience • Experience delivering SaaS solutions Additional Information Niraj Singh ************ ****************************

Provide mechanical engineering support to assigned refinery business team. Ensure their assigned business team is supported from a reliability, mechanical integrity, and technical mechanical repair perspective. PRINCIPLE RESPONSIBILITIES: * The Fixed Equipment Engineer is responsible for supporting their business team on fixed equipment reliability and repairs. * Review and recommend immediate/temporary/permanent repairs for identified anomalies or deficiencies under the guidance of a more experienced Engineer. * Participate in Root Cause Failure Analysis initiatives. * Serve as a safety champion throughout the refinery complex by ensuring full compliance to critical safety requirements including appropriate use of PPE, support of safe work practices and participate in all safety-related activities. Long-term Support & Leadership (Strategic responsibilities) * The Fixed Equipment Engineer will work under the guidance of an experienced Engineer to set long-term equipment reliability goals, evaluate technical assessments. * Under the guidance of an experienced Engineer, develop Fixed Equipment Engineer critical equipment and bad actor list for their business team. * Under the guidance of an experienced Engineer, review technical and economic analysis of repairs to justify engineering improvement and recommended priorities. * Support the implementation of risk-based and inspection strategies for equipment assets including piping, vessels, reactors, fired heaters, boilers, and other appropriate HC processing equipment. Communication Responsibilities * Maintain effective lines of communication across the refinery including the Inspection group, Maintenance, Operations, Process Engineering, etc. * Ensure appropriate communication / work with Inspections, Process Engineers, and Operations in predicting failures and proactively provide resolutions to reliability issues. Turnaround Responsibilities * Under the guidance of an experienced Engineer, participate in the Risk Based Work Selection (RBWS) process for turnaround scope development. * Under the guidance of an experienced Engineer, ensure appropriate turnaround engineering package development support during scope development, as well as timely and accurate mechanical engineering solutions for outage discovery work. Reporting & Documentation * Complete assigned Reliability Department Reports. * Follow the program to maintain neat and orderly mechanical/fixed equipment engineering files. Unit Upsets & Outages / Mechanical Troubleshooting * Provide fixed equipment engineering coverage during unit upsets and outages and ensure effective communication through accurate shift updates and shift turnover. * Ensure appropriate regular updates are issued during shutdowns/startups, ongoing unit upsets and critical troubleshooting. JOB QUALIFICATIONS: * Bachelor's Degree in Mechanical Engineering. * Less than 2 years of relevant job experience. We thank all respondents for their interest in PBF Holding Company LLC ("PBF Energy"), however, only those selected for an interview will be contacted. Please no phone calls or emails to any employee of PBF Energy about this requisition. Placement agencies or recruiters need not respond. All resumes submitted by search firms to any employee of PBF Energy via email, the Internet or in any method without a valid written search agreement will be deemed the sole property of PBF Energy. No fee will be paid in the event the candidate is hired by PBF Energy as a result of the referral or through other means. PBF Energy is an equal opportunity employer. We are committed to creating a diverse, inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, sex, gender, gender identity or expression, sexual orientation, reproductive health decision making, national origin, ancestry, genetic information, physical or mental disability, medical condition, marital status, age, veteran and military status, or any other status protected by applicable law. We are committed to providing reasonable accommodations as required by law. #LI-KW1