Engineer jobs in Youngstown, OH

We are currently seeking a motivated individual to be a part of our growing Powell Automation Division (PAD). This exciting position allows the ability to not only grow professionally but also fuel the future presence of PAD in the automation space! As a member of PAD you will work and collaborate with diverse professionals to apply innovative and creative solutions to solve problems for our clients. Key responsibilities include engineering, testing, maintaining and supporting automation solutions as well as intelligent products in MV/LV switchgear applications. Essential Responsibilities AS A PAD AUTOMATION ENGINEER YOU WILL: Become proficient in PAD solutions and offerings Review and interpret client specifications to produce project Functional Design, drawings and test documentation in accordance with the project requirements and Powell standard procedures. Develop relay configuration files using various manufactures such as SEL, GE, Siemens and Beckwith. Design and configure SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC HMI Use common industrial communication protocols such as Modbus TCP/IP, IEC61850, and DNP 3.0. Develop PLC based electrical system monitoring and controls solutions. Participate in and develop documentation for factory and on-site acceptance testing (FAT and SAT respectively), as well as perform start-up and commissioning activities as required Ensure that the company's Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services. Provide technical guidance to internal and external stakeholders, including after sales support. Minimum Qualifications BSEE or equivalent from an accredited institution General knowledge of at least one of the following: Automation and Control systems Power Systems Protective Relaying Skills, Abilities & Other Requirements Previous experience in automation, PLC control systems, or protective relaying a plus Customer service oriented Able to work effectively in a team setting or independently, able to adapt to change, self-motivated, innovative, and willing to make a difference Excellent verbal and written communication skills Experience in producing technical documentation and technical reports Strong analytical and trouble shooting skills Working & Environmental Conditions Travel is required for this position. The amount of travel is estimated to be 25% of the time to customer sites. The customer sites can be refineries, utility substation yards or even offshore platforms. The position will contain working in an office environment as well has performing testing on the manufacturing floor with the equipment More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications!Powell's culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted.Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment.EOE Protected Veterans/DisabilityIf you need an accommodation in the hiring process, you may contact 713.###.####. Application status inquiries will not be accepted in this manner.

JSG is looking for a Plant I & C Systems Engineer Serving as the system expert specifically in electrical or I&C systems in support of operating requirements. Providing leadership for Problem Solving, Decision Making, Troubleshooting and Root Cause Analysis Teams. Trending system parameters and monitoring performance of assigned systems. Preparing technical reports and presentations. Developing outage and routine maintenance activity lists. Establishing predictive and preventative maintenance (task and frequency) for assigned systems. Developing and completing investigations and corrective actions in accordance with the Corrective Action Program. Providing support for interface with regulatory and oversight agencies. Performing field walk-downs and interfacing with other groups to resolve emergent and routine plant issues. Performing audits, observations, surveys and assessments of plant activities such as maintenance and operations. Pursuing opportunities to improve site human performance. Reviewing and analyzing plant operating characteristics and both Nuclear Regulatory Commission (NRC) and Industry correspondence to identify operating experiences that may be pertinent to or will aid in the resolution of plant issues applicable to assigned systems. Reviewing schedules and work orders to ensure efficient work implementation. Championing design change improvements and interfaces. Demonstrating a solid commitment to all aspects of safety Actively seeking formal and informal learning opportunities to better understand technical policies, practices, and procedures. Developing effective working relationships with employees within you own work group and establishing a professional network Performing Emergency Response Organization (ERO) duties as assigned. Education, Experience, and Skill Requirements: Bachelor's degree in Engineering required. Bachelor's degree in Electrical Engineering is preferred. Experience in electrical and/or I&C systems is preferred. Prior professional-level engineering experience is preferred. Prior plant system engineering experience, including experience with electrical, and I&C components, is preferred. Being able to work independently with little Supervisory involvement is preferred. Proficient with Microsoft Office applications, including Word, Excel and PowerPoint. Excellent interpersonal skills and strong analytical ability. Ability to develop effective working relationships with all employees Able to deliver quality and accurate work within established deadlines. Excellent written and oral communication skills, with ability to make formal technical presentations to various management levels. Ability to work extended hours, shift schedules and perform on-call duties when necessary. Must reside within site-specific ERO response time.

Staff Engineer Reports To: SR Manager - Engineering We are looking for a Staff Engineer to provide technical leadership and mentorship to our engineering team. The ideal candidate will have extensive experience in Java development, including Spring Boot and Microservices architecture, and a proven track record of building robust, efficient solutions with Shopify experience. This role requires a strong technical foundation, leadership capabilities, a passion for innovation, and the ability to collaborate effectively with cross-functional teams and manage stakeholder relationships to deliver high-quality software. Responsibilities: Technical Leadership: Provide technical leadership and mentorship to a team of developers. Collaborate with stakeholders to understand business needs and translate them into technical requirements. Provide technical estimations and determine end to end project timelines. Develop and maintain scalable applications using Java with Spring Boot. Manage and optimize CI/CD pipelines using Bamboo and Bitbucket. Implement and oversee code quality analysis using SonarQube. Lead API development and integration processes for seamless service functionality. Conduct comprehensive testing, including TDD approaches for unit and contract testing. Utilize Google Cloud services (e.g., Pub/Sub, Cloud SQL) and transactional databases effectively. Monitor application performance using tools like Grafana and Newrelic. Troubleshoot and resolve production issues swiftly and effectively. Build, evaluate and execute Proof of Concepts (POCs) ensuring use of latest technologies and best practices Conduct knowledge sharing sessions to educate other engineers; define best practices for code development and deployment that meet high standards for availability, reliability and maintainability. Oversee development activities related to projects and production support activities. Lead incident resolution efforts and engage appropriate resources to complete corrective actions as quickly as possible in a 24/7 on-call environment. Vision and Strategy: Define the strategic vision for your team, partnering effectively with customers and stakeholders. Build and articulate a clear vision for the platform's future, aligning with business goals. Collaborate with leadership to track and report on key performance indicators (KPIs). Facilitate Root Cause Analyses (RCAs) and Correction of Errors (COEs), applying learnings to enhance system architecture and design. Stakeholder and Team Management: Engage with multiple internal teams and external partners, managing relationships and integrating technology solutions. Extensive experience working with e-commerce platforms, particularly Shopify, to enhance and streamline online retail functionalities. Prioritize tasks, manage multiple projects simultaneously, and make strategic decisions on work distribution and resource allocation. Lead and mentor a team, fostering a culture of technical excellence and innovation. Qualifications: Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. Minimum of 9 years of experience in Java development, with substantial experience in leading engineering projects and integrating e-commerce platforms such as Shopify. Advanced knowledge of JAVA, Spring Boot frameworks 1-2 years of experience in Shopify Platform Experience building Microservices using Spring frameworks and deploying to cloud environments such as AWS/Azure/GCP in an agile environment. Hands-on experience in API development such as RESTFUL/ SOAP web services. Working knowledge of database and storage such as Oracle, Postgresql, MongoDB, or Redis, etc. Experience /Understanding of security concepts such as authentication, single-sign-on etc. Experience in event drive/ message oriented middleware such as IBM MQ, Kafka, RabbitMQ etc. Experience in publisher/subscriber models, CloudSQL Demonstrated ability in building and leading technical teams, with or without direct reports. Excellent communication and interpersonal skills, capable of working in a developer-centric, startup-like environment. Pay/Benefits Information: Actual starting pay is determined by various factors, including but not limited to relevant experience and location. Subject to eligibility requirements, associates may receive health care benefits (including medical, vision, and dental); wellness benefits; 401(k) retirement benefits; life and disability insurance; employee stock purchase program; paid time off; paid sick leave; and parental leave and benefits. Paid Time Off, paid sick leave, and holiday pay vary by job level and type, job location, employment classification (part-time or full-time / exempt or non-exempt), and years of service. For additional information, please click here. AEO may also provide discretionary bonuses and other incentives at its discretion.

Job Description We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life-from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group-57,000+ engineers in 30 countries-we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. Position Overview The Test Engineer will be responsible for establishing and executing test procedures to support New Product Introduction (NPI), Qualification, and Safety of Flight programs. This role involves hands-on testing of aerospace electronic control units and rotating machines, along with the design and fabrication of supporting test setups. The engineer will also perform board-level testing of subassemblies, ensuring compliance with specifications and safety standards. Key Responsibilities Plan, coordinate, and perform tests during prototype and qualification phases of product development. Develop and execute test systems to collect and analyze digital data. Evaluate test results, validate findings, and identify necessary adjustments to meet product requirements. Collaborate with design engineers to create and refine test methods that ensure compliance with specifications. Conduct environmental, developmental, and qualification testing on electrical generators and control units. Set up, modify, and maintain test equipment, fixtures, control circuits, and instrumentation. Program test computers to control test processes and record data. Diagnose and troubleshoot test failures, recommending corrective actions. Draft clear, detailed technical reports, test procedures, and instructions. Partner with facility management to assess and modify infrastructure for new test equipment installations. Adhere to all health, safety, and environmental standards while promoting a strong safety culture. Required Qualifications Bachelor's degree in Engineering or equivalent, with at least 4 years of relevant experience; or Associate's degree in Engineering or equivalent, with at least 6 years of related work experience. Must be a U.S. Person as defined by U.S. export control regulations (8 USC 1324b(a)(3)). Proficiency with Microsoft Office Suite or equivalent tools for preparing reports and documentation. Strong technical writing, verbal communication, and interpersonal skills. Excellent organizational, analytical, and problem-solving abilities. Preferred Qualifications Experience in aerospace power generation development and testing. Familiarity with hydraulic and oil-cooled systems. Salary Range: $90,000-115,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

This position will be part of a technical team responsible for engineering work that includes continuous improvement, investigating and troubleshooting equipment/manufacturing/facility problems, analyzing production results, implementing and improving manufacturing methods and processes, and ensuring high yield and productivity in a highly automated manufacturing environment. His/her functions will also include interaction with internal and external customers and external vendors to solve urgent and complex problems by identifying and evaluating alternatives to provide support of all in-plant production as required. Position requires some on-call support. Job Responsibilities: An equipment tech. engineer ensures continuous process improvement and maintain machines through teamwork and clear communication. Co-work with production and process engineers and relative teams for success in the teams goals and for future opportunities. Design, control, and provide modification and improvement of the equipment Trouble shooting and solving problems on the chronic errors/trouble Find root cause analysis and reporting of major errors Monitor and ensure running machines continuously to reduce breakdown time Co-creation of documentation of the all the machines - creating and updating trouble shooting, work instructions, identifying problems, providing information about the course of the machine operation/maintenance during a shift and implementing preventive solutions Support for production and maintenance in solving technical problems Ensure compliance to safety and environmental regulations Direct and coordinate the activities of employees engaged in the production or processing of goods, maintenance and inspection personnel Read and analyze charts, work orders, production schedules, and other records and reports to determine production requirements and to evaluate current production estimates and outputs Practical knowledge and willingness to further develop in the area of mechanics / electrics / pneumatics and controls Implements strategies to improve equipment uptime and availability Additional duties as assigned Qualifications and Competencies: Bachelor's Degree required, Engineering or Engineering Technology preferred 1-3 Years Industrial Maintenance Engineering preferred Bi-Lingual English/Korean preferred Driven by objectives/KPIs; consistent; and high personal ownership to upholding accountability to established standards and practices Ability to use Logical thinking and decision making by focusing on identifying root cause objectively using data, analyzing production results, and following proven problem-solving methods Knowledge of Mechanical/technical curiosity and mindset Commitment and desire to learn our complex battery manufacturing processes with the goal of becoming a go-to resource for technical problem-solving discussions Effective communication and presentation skills MS Office tool-based report writing and oral communication skills Ability to work well with individuals and teams across the company to achieve team goals and targets Good computer, Troubleshooting, Problem-solving, Critical thinking skills Ability to work well in a team environment a requirement Total Rewards Information: We offer market-competitive compensation including base pay and incentive compensation opportunities based on the achievement of Company goals. We offer employees paid time off to refresh and recharge. Our total rewards program is designed to enrich your life at work and includes the following benefits: Blue Cross Blue Shield Health Care 100% Employer paid medical, dental and vision Up to 20 paid holidays a year but no less than 17 paid holidays Tuition Assistance for continuing education Vehicle Discount Program on General Motors branded vehicles Communication Stipend for Personal Cell Phone Comfortable air-conditioned work environment

Are you ready for a rewarding and challenging career in the steelmaking industry? Join us! We are looking for the best-those who are not afraid to roll up their sleeves to grow with our organization, personally and professionally! Utilizing independent judgment, this position is responsible for the development of both installation and equipment modifications throughout the facility. This position is responsible for the engineering and modifications to physical plant, utilities and grounds. Contact for EPA/DEP on all environmental issues and responsible to ensure that all environmental requirements are met. Overall responsibility for complete management of projects in accordance with established budgets and specification requirements from development to overall completion. Meets with and oversees contractors utilized in such projects. About Ellwood Quality Steels: * Family-owned business with long-range vision. * The world leader in the production of high quality carbon, alloy, stainless and tool steel ingot. * Unmatched commitment to our customers. * Emphasis on flexibility, responsiveness, and problem solving. * Continual investment in our people, process, and equipment. * Highly trained workforce, state-of-the-art equipment and methodology. * A manufacturing environment where excellence is an everyday occurrence. * **************************** Our focus at Ellwood Quality Steels is to create an environment of opportunity where you can grow your career. Our culture values diverse talents and the contributions of all employees. Our commitment includes competitive compensation, support for your professional growth, and a range of employee benefits that help to protect the health and welfare of our people. What You'll Get: * Competitive compensation with eligibility for Profit Sharing * 401(k) retirement plan with an excellent Employer Match * Excellent health care, dental and vision plans * Company-paid Life, AD&D, and disability benefits What You'll Do: * R * Conducts feasibility studies for projects, as necessary. * Writes bid specifications for equipment, engineering, erection and installation. * Solicits, evaluates and negotiates contracts for bids. * Estimates, schedules and assures projects come in on budget and on time. * Provides maintenance and production engineering support to all departments. * Interfaces with contractors, equipment suppliers and regulatory agencies. * Conducts environmental sampling and inspections. * Responsible for environmental compliance and reporting. * Assists the Vice President of Steelmaking Technology, as needed. * Other projects as requested, including travel (local, national and international) as required. * Abides by all policies and procedures established by the Company including plant safety regulations and work rules. * Must have ability and desire to work well with others. * Meets attendance requirements. * Performs other duties as deemed necessary. What You'll Need: * Bachelor of Science in either Civil, Mechanical or Electrical Engineering, or a commensurate level of related experience and education. * 5-7 years' experience in a heavy industrial environment is preferred, including capital project management and execution. * Previous environmental experience is required. * Strong verbal and written communication skills. * Good computer skills with proficiency - Microsoft Office (Word and Excel) preferred. * Ability to work with personnel at all levels of the organization * Strong work ethic * Required to have an active and valid driver's license, or the ability to travel and commute as required, and comply with the Motor Vehicle Safety Program. EQS is an Equal Opportunity Employer/Affirmative Action Employer. Minorities/Females/ Protected Veterans/Individuals with Disabilities/sexual orientation/gender identity

Infrastructure Engineer THE ROLE We want you to help build our AWS Professional Services team. As an AWS Premier Partner, we have a healthy pipeline of highly technical work, and we're constantly pushing the boundary of what's possible in the AWS cloud. In this role, you'll be responsible for providing engineering support during the sales cycle, act as a subject matter expert where needed, and ultimately for deploying solutions in AWS. Expect to keep your hands on the keyboard as you not only design, but build complex technical solutions for our Life Sciences, Financial Services, and ISV/SaaS clients in AWS. PRIMARY JOB RESPONSIBILITIES Engage in AWS engineering work (including designing and deploying complicated solutions) for clients Be the face of with your clients - a great communicator and analytical thinker to guide client decision making during project, interact successfully with vendors and other IT personnel, and ensure is always moving the ball forward Be a consultant and leverage your brain at every step of the engagement to deliver the best solution possible for the client Own your projects, own your decisions, and take pride in doing the best job you can Contribute to codebase with CloudFormation, Terraform, or potentially other automation and scripting languages Participate in an on-call rotation for emergency support issues Acquire and maintain all 5 of the “core” AWS certifications (Solutions Architect - Associate, Solutions Architect - Developer, SysOps Administrator - Associate, Solutions Architect - Professional, DevOps Engineer - Professional) Dedicate roughly 30 hours of your time to engineering tasks Contribute to the ever growing knowledge base Be an AWS platform expert in the “core” infrastructure areas (VPC, EC2, RDS, S3, etc.) Maintain expertise in a subset of strategic AWS services (WorkSpaces, AppStream, ECS, CodeDeploy, EMR, Batch, SageMaker, etc.) Act a subject matter expert as needed to support engineers engaged with Managed Services client portfolio, and help out with solution design and scoping for the sales team as needed Work independently and as part of a team REQUIREMENTS 10+ years of IT infrastructure experience overall 5+ years working with the Microsoft server stack - Server, Exchange, SQL, Remote Desktop, etc. Alternatively, 5+ years working with Linux administration (DNS, LDAP, web servers like apache and nginx, package management, etc.) 3+ years of experience in technology consulting, enterprise, and solutions architecture (preferably in AWS) At least 1 Associate Level AWS certification (Certified Solutions Architect, for example) Deep expertise in at least one of the following areas of traditional IT infrastructure: storage, firewalls, networking, hypervisor, VDI, database administration, web apps Experience working on large scale IT projects related to design, deployment, and configuration Proven track record of delivering solutions within defined timeframes Any experience administering services on AWS (EC2, VPC, ECS, S3, ELB, RDS, Route53,WorkSpaces, AppStream 2.0, CloudWatch, CloudTrail,, etc.) would be a wonderful bonus Expertise with modern DevOps concepts, CI/CD processes, git commands, container platforms (docker, kubernetes, ECS, etc.) Obsessive need to automate. Relevant languages include: bash, python, PowerShell, AWS CLI Familiarity with Jupyter Notebooks is a plus Comfortable working with CloudFormation, Terraform, or a healthy appetite to learn! Exceptional collaboration, listening, written and verbal communication skills with the ability to facilitate technology strategy, requirements and architecture conversations with all stakeholders Self-starter with the ability to work independently and as part of a project team Ability to manage your time and keep things from falling through the cracks even with multiple, simultaneous projects going on

Welcome to Verdantas, where innovation meets sustainability, and your career finds purpose! At Verdantas, we're redefining environmental consulting and sustainable engineering through our use of cutting-edge modeling and digital technology and our genuine commitment to people. Our work spans high-growth sectors like water resources, resilient land use, energy transformation, and civil infrastructure. Our commitment to excellence, across more than 90 offices, is championed by a team of over 2,000 experts, scientists, engineers, geologists, and technical specialists, embedded in a people-focused culture, prioritizing the well-being of our employees, clients, and the communities we serve. We partner with clients to deliver smart, data-driven solutions to complex environmental and infrastructure challenges. We don't just solve problems; we help shape a more sustainable future. Join a people-first culture that values your well-being, empowers your growth, and amplifies your impact. At Verdantas, your career goes beyond the expected, and your work helps build a better world. **Ready to shape the future of resilient communities?** As an Entry Level **_Civil Engineer_** **_I_** in Water Collections Systems, you will play a crucial role in supporting the design, implementation, and maintenance of water collection systems. You will work closely with senior engineers and project managers to ensure the successful completion of projects. This is an excellent opportunity for a recent graduate or early-career professional to gain hands-on experience and grow within our organization. The ideal candidate will have experience working with collection systems, drainage infrastructure, and waterways. Background understanding of hydraulics is a plus. The individual must work well as a part of a team on a daily basis including site visits and confined space entries. The position requires attention to detail, self-motivation, critical engineering thought, and schedule management. This position will work out of our **_Mentor, OH_** office. **Responsibilities:** + Assist in the design and development of water collection systems, including pipelines, pumping stations, and treatment facilities. + Conduct field inspections and assessments to ensure compliance with project specifications and regulatory requirements. + Prepare technical reports, drawings, and documentation for project submissions. + Collaborate with cross-functional teams to support project planning and execution. + Participate in project meetings and provide technical input as needed. + Perform data analysis and modeling to support engineering decisions. + Ensure adherence to safety standards and best practices in all project activities. + Field conditions assessment, Confined Space Entry participation, flow monitoring and other field data collection and review. **Qualifications:** + Bachelor's degree in Civil Engineering, Environmental Engineering, or a related field. + Strong analytical and problem-solving skills. + Proficiency in engineering software and tools (e.g., AutoCAD, GIS, hydraulic modeling software). + Excellent communication and teamwork abilities. + Ability to work independently and manage multiple tasks effectively. + Willingness to learn and adapt to new challenges. + Willingness to work outdoors in varying weather conditions and the ability to lift up to 50 lbs, occasionally up to 80 lbs. + Valid driver's license and ability to travel to project sites as required. **Salary Range:** $62,000 to $75,000 **Benefits:** + Flexible Work Environment + Paid Parental Leave + Medical + Dental + Vision + Life and AD&D Insurance + Short-Term and Long-Term Disability + 401(k) with Company Match + Paid Time Off + Holidays _Verdantas strives to develop new ways to increase diversity awareness within our organization. We recruit and reward our employees based on capability and performance - regardless of race, gender, sexual orientation, gender identity or expression, lifestyle, age, educational background, national origin, religion, or physical ability. For us, it is imperative to build balanced teams from all walks of life and we believe that a diverse workforce is a stronger workforce._ **Verdantas is an EOE** **race/color/religion/sex/sexual** **orientation/gender identity/national** **origin/disability/vet** Ready to take the next exciting step in your career journey? Dive into our current job openings and discover the perfect opportunity waiting just for you. Explore our diverse range of roles across various departments and embark on a path towards growth, innovation, and success. Your dream job could be just a click away... For assistance filling out applications, complete this form (************************************************************************************************************************************** .

A Project Engineer acts as a key member of project engineering team supporting the Food and Dairy Department in the successful and timely completion of assigned projects. The individual supports and/or executes projects by maintaining or increasing profitability of contracts through efficient engineering design and execution, while simultaneously achieving customer satisfaction. Projects may be comprised of different technologies consisting of Spray Drying, Evaporation, Filtration and Liquid Processing. Additionally, the Project Engineer may act as the Project Manager for select projects. This role provides the opportunity for a hybrid working schedule (up to one day per week remote). Responsibilities / Tasks Job Summary: A Project Engineer acts as a key member of project engineering team supporting the Food and Dairy Department in the successful and timely completion of assigned projects. The individual supports and/or executes projects by maintaining or increasing profitability of contracts through efficient engineering design and execution, while simultaneously achieving customer satisfaction. Projects may be comprised of different technologies consisting of Spray Drying, Evaporation, Filtration and Liquid Processing. The focus for this position is on the Spray Drying technology. Additionally, the Project Engineer may act as the Project Manager for select projects. Essential Duties/Responsibilities: Participates in all phases of a project from initial customer meetings through pre-award sales support, cost estimation, proposal generation, engineering, commissioning and start up. Is responsible for specific technical areas of the project, specifying technical solutions and equipment which meet customer expectations/specifications within the time and budget constraints of the contract. Adheres to design standards and optimization of engineering designs to meet customer specifications within project budgets. Proactively anticipates technical, schedule, execution or commercial problems and exercises judgment to meet project commitments. Responsible for documenting and keeping accurate records of customer meetings, discussions and correspondence as well as maintaining well-organized technical files for project document control - i.e., generating outgoing deliverables, document transmittals, version control, tracking incoming customer approvals and filing. Responsible for working with designers to complete General Arrangement and Hole and Load Drawings. Creates and maintains utility lists and equipment tag lists. Specifies and sizes components such as valves, pumps, instrumentation, etc. Creates component technical specifications for design department and participates in design reviews. Evaluates and approves design changes, specifications, and drawing releases. Responsible for coordination of shipping equipment to site with logistics department support. Supports close out of mechanical punch-list items during installation phase of projects. Performs input/output (I/O) and mechanical checkout of installed equipment on site. Assists with maintenance and operator training at customer sites during project start up. Responsible for completion of engineering and commissioning tasks for projects according to GEA standards, customer specifications and applicable regulations. Utilizes the tools and documentation defined by the GEA standards through all phases of the project. Provides detailed information to the project manager to facilitate planning and execution of the project including risk identification and mitigation, work breakdown structures and activity lists. Works with cross functional teams to complete project deliverables, determine customer needs and ensure the applicability of designs and solutions. Provides technical support to resolve customer problems related to equipment/system performance and process trouble shooting. Assist in planning and implementation of tasks such as test procedures, installation RFQ and site support, commissioning plans and site acceptance based on contractual requirements. Actively supports the Department/Project Manager in identification and justification of scope changes and assists in preparation of subsequent cost/schedule impact estimates and change orders to be submitted to the customer. Create request for quotations documents and assist Procurement in vendor technical bid evaluation, vendor selection and management. Support service organization efforts as required. Be familiar and ensure compliance with government regulations, such as safety standards, environmental regulations, etc. and industry standards such as sanitary requirements. Adheres to GEA Environmental Health and Safety policies in addition to OSHA regulations. Assists in the preparation of O&M manuals and Spare Parts List. May simultaneously be assigned to act as Project Manager on select projects. Responsible for utility, instrumentation, and motor location drawings. Supports the Department/Project Manager in developing project plans, cost estimates and execution plans. May be required to make technical and/or project progress presentations to management and/or customers. Responsible for generating schedules to accomplish the project/program milestones. Timely in responses and actions to other duties as assigned. Required Skills/Abilities: Excellent verbal and written communication skills in English. Must possess strong interpersonal skills and work well in a team setting as well as independently. Exceptional interpersonal and customer service skills. Able to be self-motivated, take initiative, be decisive, and have commercial / business acumen. Admirable sales and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Able to continue developing strong leadership skills. Ability to prioritize tasks and to delegate them when appropriate. Ability to function well in a high-paced and at times stressful environment. Your Profile / Qualifications Education and Experience: Bachelor degree in Mechanical Engineering, Food Technology, or similar related degree. 2+ years experience with similar responsibilities . Experience with US Dairy industry standards (3A, USDA) preferred. Experience with fabrication drawings / Blueprint reading preferred. Able to work independently with supervision as necessary. Must be willing to travel up to 50% of the time (Typically around 25% on average) The typical base pay range for this position at the start of employment is expected to be between $80,000 - $120,000 per year. GEA Group has different base pay ranges for different work locations within the United States. The pay range is not a guarantee of compensation or salary. The estimated range is the budgeted amount for the position. Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons. You may be eligible for additional rewards, such as discretionary bonus (based on eligibility) and/or equity awards. Working at GEA Group has significant benefits: • 12 Paid Holidays • PTO - Paid time off • Medical Plans • Dental Insurance • Vision Insurance • Health Savings and Spending Accounts • Tuition Reimbursement • 401k with excellent employer match • Wellness Incentive Program • Employee Assistance Program #engineeringforabetterworld GEA Group is committed to fostering an inclusive work environment where all clients and employees feel welcomed, accepted and valued. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Did we spark your interest? Then please click apply above to access our guided application process.

Customer facing role that is responsible for supporting the sales team in driving new product development and revenue growth. This role will work directly with the customer to provide new and innovative solutions on product design and material selection and then transfer that requirement to the internal new product introduction process. The role will act as the project manager to ensure that the product development and prototype samples are completed on time and according to the customers' expectations. Key Responsibilities: Customer relationship management - particularly with Engineering counterparts Product/profile design and conversion to engineering drawings Project management for new product development/introduction process and new program launches Completing projects on time and according to the required specifications to ensure a smooth transition to product realization - from prototype to production Ensuring that designs and drawings will be supported by our internal capabilities and manufacturing processes Supporting the development engineering, cost estimating, and process engineering teams as needed Supporting the business in strengthening our manufacturing and engineering capabilities as a competitive advantage and business differentiator Active participation in ongoing continuous improvement projects, business planning, and capital project identification and implementation Completing all other tasks as assigned Competencies/Skills: Proficient in AutoCAD/SolidWorks Excellent communication skills for internal and external customer interaction Strong problem-solving skills Able to work independently Able to lead teams and manage projects Education and Experience: BS in Engineering - Mechanical or Industrial preferred 5+ years of manufacturing engineering experience 3+ years of experience in product design and development 3+ years of experience in rubber/plastic profile extrusion 3+ years of experience in the building facade or architectural aluminum industry Broad range of polymer material knowledge - rubber, plastics, thermoplastics Key Stakeholders/Relationships: Customers Sales team Engineering team Quality team Operations team Supply chain and planning team

Flexsys is a global supplier of rubber chemicals and solutions including insoluble sulfur, anti-degradants, and stabilizers. The company's singular focus is on delivering better solutions for manufacturers of tires and other rubber products that enhance product performance, optimize production efficiency, and ensure supply chain success. As the largest manufacturer of tire-industry additives in the world, and a newly independent entity, Flexsys brings a track record of innovation, quality, specialized expertise, a highly collaborative approach, and a commitment to growth - working together with our customers as a valuable partner, helping to meet their critical objectives. Flexsys, a global leader in Tire Additives Technology, is seeking a highly motivated and innovative R&D Applications Engineer to join our dynamic team in Akron, OH. This is an outstanding opportunity to contribute significantly within an agile, independent, and high-impact group. In this pivotal role, you'll drive applied research projects for our cutting-edge Crystex insoluble sulfur technology platform. You'll be instrumental in applying fundamental scientific principles, upholding rigorous laboratory practices, and fostering close collaboration with our Manufacturing, Marketing/Technical Service, and Sales organizations. We are seeking a self-starter with a broad scientific curiosity who thrives in a fast-paced, agile, and multidisciplinary environment. You will discover ample opportunities for professional growth and exploration. This position also offers the chance to travel to plants and customer sites, where you will directly address practical, real-world challenges and witness the implementation of your innovative solutions. Join Flexsys and make a tangible impact on the future of tire technology Roles and Responsibilities: The R&D Applications Engineer will: Couple their scientific fundamentals-based, problem solving approach with a broad intellectual curiosity to address a wide-range of challenges and opportunities across our products lines, including: developing structure-property relationships, determining the influence of our product & process attributes on our customers' applications and proposing product and process improvements to better address customer needs Apply fundamental expertise in powders, rheology, rubber, or polymer science/physical chemistry/engineering to deepen our understanding of our products and how they perform across a variety of performance parameters Support application development efforts through effective laboratory test development, product characterization and experimentation Drive product improvements by fostering strong cross-functional relationships with manufacturing, supply chain, and sales, ensuring customer input is directly translated into delivered products Drive customer engagement through customer site visits, encompassing Research and Development, laboratories and manufacturing facilities, to develop in depth understanding of customer needs which are crucial for comprehensively assessing the performance of both existing and future Flexsys products within real-world operational environments Lead multidisciplinary project teams and play a key role in market surveillance/intelligence efforts Collaborate with team members to brainstorm, develop project objectives, work plans, and milestones Communicate results effectively broadly across the organization, including business management, marketing, technology, commercial and manufacturing stakeholders Requirements Requirements Masters in Chemical/Materials Engineering, or a related discipline required A problem-solving attitude, broad intellectual curiosity and an ability to learn / combine knowledge from different disciplines to develop understanding of product/application performance Demonstrated broad working knowledge in a wide range of polymer science skills including structure property relationships, polymer physics, characterization, and polymer testing. Experience with powder rheology is a plus. Entry to 5 years experience Experience with standard laboratory methods and safety protocols Experience in the development of processing-structure-property relationships through systematic experimental design Strong oral and written communication skills Independent and driven with the ability to prioritize and handle multiple projects simultaneously within a multi-site cross-functional team Role requires approximately 15% travel Located in Akron, OH Flexsys is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other characteristics protected by law.

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Utility Infrastructure Group is seeking an entry-level Staff Engineer in Akron, OH! In this role, you'll work on utility projects, including water and stormwater systems, completing tasks such as design work, calculations, and field visits. You'll support both office tasks and construction activities in the field. As a company, we are committed to living our values every day and providing you with the support and opportunities to build a fulfilling career while contributing to projects that improve vital community infrastructure. Why start your career American Structurepoint: Onboarding & Training: Learn from experienced professionals and build meaningful, long-term relationships Mentorship & Career Growth: Receive support and guidance as you grow your skills and advance your career Real Projects: Contribute to high-profile, community-impacting projects from day one Industry Connections & Networking: Take advantage of exclusive industry connections and professional opportunities Future Focused: Build a strong foundation for a long, successful career with opportunities to grow within the firm Responsibilities What you will do: Collaborate with Project Managers and City of Indianapolis staff to research data and records related to regulatory compliance Utilize GIS software, client databases, and historic files to support project documentation and decision-making Gain firsthand experience in a client-facing consulting environment, learning how public infrastructure projects are managed and maintained Assist in preparing technical documents, including permit applications, design drawings, inspection records, and supporting exhibits Other tasks as needed to support the team Qualifications Qualifications: Recent or soon-to-be graduate with a bachelor's degree in Civil, Environmental, Construction, or Structural Engineering, Land Surveying, or a related field with a focus on civil infrastructure Reliable transportation to and from the office or local project sites Motivated and eager to learn, with a strong work ethic and a willingness to take on new challenges

Embark on a career-defining adventure as a Project Engineer and be the driving force behind our triumphs! Join our dynamic team where collaboration meets innovation, and together, we create results that truly redefine what's possible. Your role is not just about projects; it's about crafting "Powerful Solutions" that leave a lasting impact. Here's a glimpse of what awaits you: What You'll Be Doing: Dive into the exciting world of project engineering by reviewing and submitting shop drawings. Showcase your organizational skills by tracking project submittals and building construction project schedules. Take charge of monitoring and maintaining installed quantities, ensuring projects stay on track. Get hands-on experience in maintaining accurate cost reports and tracking, as well as assisting in estimating functions. Develop your skills in generating Requests for Information (RFI), a crucial aspect of project communication. Build relationships and enhance your communication skills by engaging with customers. Support the field team by addressing questions on design and customer requirements. Ensure your team adheres to contract requirements and take on additional duties as assigned. What You Bring: A Bachelor's degree in Construction Management or Engineering, or equivalent field experience 1-2 years of experience in Project Engineering preferred, but not required Proficiency in Microsoft Office Suite, showcasing your excellent computer aptitude. Why Join Us: Professional Growth: Elevate your skills and knowledge with a hands-on role that provides room for growth through our Project Engineer Development Program. Cutting-Edge Tools: Work with industry-leading tools and software, including Primavera P6, Viewpoint, AutoCAD, Navis, Bluebeam, HeavyBid, or ConEst. Variety of Projects: Be part of diverse projects such as T&D, Substation, and Commercial/Industrial Electric. Work-Life Balance: Enjoy benefits like PTO, Sick Days, Flex Fridays, and a family-friendly company culture. Health and Wellness: Comprehensive health benefits, including dental, vision, and other voluntary offerings along with a Company Wellness Program. Financial Planning: Competitive salary with bonus potential, vehicle allowance, fuel card, 401k with Company match, and educational financial assistance through a Certified Financial Planner. Join our Bruce & Merrilees family, where safety comes first, and our family culture keeps us grounded. Take the leap and grow with us as we prioritize your well-being and offer a collaborative and supportive work environment. Your career journey starts here! Bruce & Merrilees is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status. Our hiring process includes drug & alcohol screening, E-verify, driving record and background check. Bruce & Merrilees is an Equal Opportunity Employer and a Drug Free Workplace Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Title: Manufacturing Engineer Our client, a full-service plastic injection molding contract manufacturer and FDA-certified medical device manufacturer, is seeking a Manufacturing Engineer at its established manufacturing site outside of Erie/Meadville, Pennsylvania. Position Overview Reporting to the Plant Manager, the Manufacturing Engineer optimizes and improves production processes in plastic injection molding, ensuring efficiency and quality. This role involves project management, vendor coordination, cost estimation, process validation, and equipment design while maintaining safety and productivity standards. Responsibilities and Functions: Develops, evaluates, and improves secondary operations methods. Assists in preparing quotes for secondary operations. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards. Develop packaging for products. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Manage projects within budget and maintain delivery dates. Supports production requirements as needed. Police use of safety devices and equipment and general housekeeping; maintains alert for hazardous conditions and practices. Design, build, and maintain various pieces of secondary operations equipment. Develop process verification and/or validation for the assembly and inspection of non-medical and medical products. Required Skills and Qualifications: Bachelor's degree in engineering or a related field, or equivalent combination of education and experience. Strong ability to read and interpret technical journals, corporate procedures, and product specifications. Excellent communication skills for engaging with internal teams, vendors, and customers. Proficiency in statistical analysis, geometry, percentages, and ratios for problem-solving and decision-making. Strong analytical skills to define problems, collect data, and interpret complex technical instructions. Proficient in computer applications, including spreadsheets, databases, and word processing. Knowledge of PLCs, basic wiring, and machining. Ability to troubleshoot mechanical, electrical, programming, fixturing, and production-related issues. Company Benefits: Employee Stock Ownership Plan (ESOP) 401k Savings Plan Health, dental, and vision insurance Paid time off and personal/sick days Physical Demands and Work Environment: While performing the duties of this job, the employee is regularly required to stand, walk, climb, and sit. Regularly uses hands and fingers to operate a computer keyboard, tools, and equipment. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. While performing the duties of this job, the employee frequently works near moving mechanical parts and electrical circuits. The noise level in the work environment is usually moderate. Location: Erie-Meadville PA If you are interested in this position, please apply here or send your resume to *********************** or contact me directly at **************.

Establishing processes and procedures used for the manufacturing of products. This position is required to identify and implement processes that improve the safety, quality, and operating efficiency in a manner that supports the objectives of the Business Unit. * Identify and implement process improvement initiatives focused on cost reduction, quality improvement, and business growth. * Ensure all manufacturing processes comply with the Powell Quality System. * Identify and implement product design improvements, working closely with Product engineers. * Provide technical support for manufacturing operations and product design. * Write work instructions and equipment preventive maintenance manuals. * Provide technical support and training to the Maintenance team. * Perform other related duties as assigned. Job Requirements * BS Degree in Manufacturing, Industrial, or Mechanical Engineering, or related area. * Minimum 2-5 years of experience in a Manufacturing Engineer role, preferably supporting fabrication equipment * Demonstrated proficiency with computer skills using Oracle, MS Office and MS Project. * Demonstrated success with specifying, implementing, and manufacturing equipment. * Ability to order material electronically. * Advanced knowledge using drafting/CAD skills with the ability to create and modify Factory Layouts. * Knowledge of ISO 9000 Quality System. * Experience with either the Toyota Production System or Lean Manufacturing. * Project Management experience, leading multi-disciplined teams. * Proven track record of completing process improvements from conception through final implementation and ramp-up. * Familiar with statistical test procedures and corrective action techniques. * Excellent mechanical and electrical systems aptitude. Understanding of pneumatic, hydraulic, and servo positioning systems, as well as, and machine controls. * Project involvement and organizational skills to handle multiple priorities. * Demonstrated written and verbal communication skills. * Demonstrated simple analytical and problem solving ability. * Ability to implementing designs and solutions. * Able to follow directed instruction. * Able to lead change and respond to tactical changes. * Able to prioritize and manage time effectively. (self-motivated and self-managing). * Demonstrated mechanical aptitude. * Attend in house and outside training sessions. * Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products.

APPLICATION INSTRUCTIONS: CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. If you are NOT a current employee or student, please click “Apply” and complete the application process for external applicants. Approval of remote and hybrid work is not guaranteed regardless of work location. For additional information on remote work at Penn State, see Notice to Out of State Applicants. POSITION SPECIFICS The Electro-Optics Center (EOC), located in Freeport PA, a Division in the Applied Research Laboratory (ARL) at Penn State University, is seeking a Photonics Research and Development Engineer with expertise in Optical Communications, supporting military and intelligence community customers. You Will: Perform research and development tasks in optical communications. These include system-based analysis tasks as well as prototype development and testing Communicate and document results in reports and presentations Assist with development of proposals for projects Assist in new concept development; analyzing alternatives independently and applying engineering techniques and procedures to assignments Lead optical communication related projects of small or moderate size and scope, making substantial contributions Engage with government customers to identify opportunities and provide potential solutions that lead to funded projects Provide technical leadership within the division for optical communications Chair sessions at technical conferences/meetings; participate in external seminars, workshops, professional societies and committees Independently manage multiple and/or large optical communications projects Lead the development of proposals and projects that further our knowledge of optical communications Develop and maintain long-term professional relationships with relevant manufacturers and system integrators, as well as with government sponsors, to ensure projects meet customer requirements and are consistent with ARL's position of trust and strategic mission Participate in strategic planning initiatives and collaborate with engineers in other technical areas across ARL Required skills and experience includes: 10+ year's experience in guided (fiber), free-space or under-sea optical communications Optical system design, especially as it relates to free space and/or fiber optical communication systems Communication architectures, systems, protocols, devices, media, and integration Hands-on prototyping and demonstration of optical and RF components, links, and networks Interfacing with, collection from, and diagnosis of data from hardware Communicate, document, and present results Preferred skills and experience includes: A Master's degree in Engineering, Physics, Optics, or a related field is highly desired Significant experience in the development and understanding of optical communication architectures, systems, protocols, devices, media, and integration - especially as it pertains to military applications Expert knowledge of current state-of-the-art systems, optical propagation, laser communications systems and subsystems Space-based payload and systems experience Experience with end-to-end optical remote sensor development Current relationships with optical suppliers and familiar with the optics vendor ecosystem Business development experience with government customers Project management and leadership Experience with VPI or OptSim or the like is a bonus An active Secret security clearance with eligibility for TS/SCI is highly desirable Your working location will be full onsite located in Freeport, PA. Questions related to flexible work should be directed to the hiring manager during the interview process. MINIMUM EDUCATION, WORK EXPERIENCE & REQUIRED CERTIFICATIONS Bachelor's Degree - Engineering or Science 19+ years of relevant experience Required Certifications: None ARL's purpose is to research and develop innovative solutions to challenging scientific, engineering, and technology problems in support of the Navy, the Department of Defense (DoD), and the Intel Community (IC). FOR FURTHER INFORMATION on ARL, visit our web site at **************** BACKGROUND CHECKS/CLEARANCES Employment with the University will require successful completion of background check(s) in accordance with University policies.All positions at ARL require candidates to possess the ability to obtain a government security clearance; you will be notified during the interview process if this position is subject to a government background investigation. You must be a U.S. citizen to apply. Employment with the ARL will require successful completion of a pre-employment drug screen. SALARY & BENEFITS The salary range for this position, including all possible grades, is $141,700.00 - $219,600.00.**THE PROPOSED SALARY RANGE MAY BE IMPACTED BY GEOGRAPHIC DIFFERENTIAL** Salary Structure - Information on Penn State's salary structure Penn State provides a competitive benefits package for full-time employees designed to support both personal and professional well-being. In addition to comprehensive medical, dental, and vision coverage, employees enjoy robust retirement plans and substantial paid time off which includes holidays, vacation and sick time. One of the standout benefits is the generous 75% tuition discount, available to employees as well as eligible spouses and children. For more detailed information, please visit our Benefits Page. CAMPUS SECURITY CRIME STATISTICS Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines

Application Engineer (Mexico Emphasis) Manufacturer of wire harnesses, cables, and custom components in Twinsburg, Ohio, is seeking an Application Engineer. This position has an emphasis on communication and collaboration with our Mexican partners, and the applicant should be fluent in both spoken and written Spanish. The ideal candidate will have a broad knowledge base with associated experience covering plastics, injection molding, electronics, and electrical systems as related to outdoor power equipment and vehicular applications. Reading and drafting of prints, and mechanical aptitude are also necessary qualities. We are looking for a reliable, detail oriented, and assertive team player. This is a full-time 1st shift position that requires occasional overtime when needed in order to meet customer deadlines. Minimum BE/BS in Engineering or related science(s) with applicable experience is required. Salary commensurate with qualifications, education and language skills. Benefits include medical, dental, vision, life insurance, and 401K with company match. Duties and Responsibilities include, but are not limited to: Communicate technical details with Mexico on a daily basis; translate to/from English (Spanish required) Read, interpret, detail and estimate technical prints, schematics, specifications Advise, counsel and inform internal and external customers; be the technical point of contact as assigned Draft prints, specifications, reports, BOMs, schedules, and manufacturing work instructions Develop and review designs, verify and validate product/processes, model prototypes, pre-launch and manufacturing methods/aids Document and record engineering events/effects per ISO 9001/QMS and engineering directives Provide support to other departments as required Work closely with customers and company representatives when needed for all stages of project design and production Control and assure quality of work Practice safety and mitigate potential risks Propose and drive improvements Occasional domestic and international travel

What Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of today's industrial equipment and preparing for the future of motion on our planet and beyond. New employees can start contributing right away, and there are many opportunities to advance your career at your own pace. Join our global team of 19,000 people in 45 countries, and start helping our customers push the limits of what's possible in their world of motion. Description: Primarily responsible for providing expert knowledge and leadership in the development, application, and deployment of advanced materials and material processing technologies, utilizing an understanding of materials thermodynamics, materials thermal processing fundamentals, and ferrous metallurgy. Specific duties include: * Conceives, plans, and executes projects working either alone or in collaboration with others to address the needs of the business units or corporate centers. Takes a lead role in collaborative effort to solve complex problems while requiring novel approaches that leverage and/or further advanced engineering research in metallurgy and materials science. (40%); * Interacts proactively with product development, sales, marketing, and manufacturing. Leads activities with outside vendors and suppliers to accomplish project goals. (30%); * Provides guidance and advice to management to change direction in an existing program or project as warranted by scientific or technological development. (10%); * Acts as a mentor to other associates, helping them to develop excellent technical, problem solving, and leadership skills. (10%); * Serves as a technical expert for the company in the development and application of advanced materials and associated processing technologies. (10%) Requirements: * Ph.D. in Metallurgy, Materials Science or similar field and 24 months of experience in a Materials Engineer or similar position. * Experience must include expertise in corrosion testing and materials characterization using SEM-EDS and XRD. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.

Job DescriptionProject Engineer - Civil, Industrial & Commercial Concrete 🏢 Company: Gregory Construction Gregory Construction, a Christian-principled, award-winning contractor, is seeking a Project Engineer to support civil, industrial, and commercial concrete projects across the Southeast. This role is essential in assisting project leadership to ensure work is executed safely, on time, within budget, and to Gregory's high standards of quality and integrity. Key Responsibilities: Provide engineering support to Superintendents and Project Managers in daily field operations. Review drawings, RFIs, and project documents to support accurate execution. Assist with purchase order requisitions, material tracking, and delivery coordination. Maintain project documentation, including daily reports, records, and files. Attend and contribute to project progress meetings. Monitor project schedules, costs, and resources to ensure deadlines and budgets are met. Support in maintaining safety, quality, and compliance standards on all project sites. Perform additional tasks as assigned to support project success. Qualifications: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Foundational knowledge of construction specifications, methods, and procedures. Ability to apply engineering principles to solve construction challenges. Strong organizational and communication skills. Previous construction internship, co-op, or field experience is a plus. Willingness to travel as needed for project assignments. Why Gregory Construction: Competitive pay, PTO, and company-paid health/dental/vision/life insurance. 401(k) with company match. Opportunities for mentorship, training, and career growth. Supportive, faith-based culture built on Safety, Integrity, Excellence, Communication, and Determination. Apply today to join Gregory Construction as a Project Engineer and grow your career with a respected leader in civil, industrial, and commercial construction. Powered by JazzHR DNio24Ipvg