Engineering associate jobs in Avondale, AZ - 647 jobs

Mechanical Engineer Locations: Chandler, Arizona. Boise, Idaho. Albany, New York. Dallas, Texas. Raleigh-Durham, North Carolina. On Site Salary: $160,000 - $200,000 Bonus PMI Package Our client is seeking a Senior Mechanical Engineer (Onsite) to support the design and delivery of mission-critical data center projects. This role focuses on leading mechanical system design for high-availability environments, working closely with multidisciplinary teams from concept through construction and commissioning. The successful candidate will play a key role in developing HVAC and cooling solutions for data centers, including chilled water systems, air handling, and mechanical plant layouts, ensuring reliability, scalability, and energy efficiency. Key Responsibilities Lead mechanical design for data center infrastructure, including cooling and HVAC systems Perform and review load calculations, system sizing, and energy analysis Produce and review drawings and documentation using AutoCAD and Revit Coordinate with electrical, structural, and architectural teams Provide onsite technical leadership during construction, supporting RFIs, submittals, and commissioning Qualifications Bachelor's degree in Mechanical Engineering 7+ years' experience in mechanical engineering, ideally within data centers or mission-critical facilities Strong knowledge of data center cooling systems Proficiency in AutoCAD and Revit PE or working toward licensure preferred If you're looking to take a senior, hands-on role delivering high-impact data center projects, we encourage you to apply.

DRA Global Limited is an international multi-disciplinary engineering, project delivery and operations management group, predominantly focused on the mining, minerals and metals industry. The Group has an extensive track record spanning almost four decades across a wide range of commodities. Our teams have deep expertise in the mining, minerals and metals processing industries, as well as related non-process infrastructure such as, water, and energy solutions. DRA covers all major mining centers with offices across Africa and the Middle East, North and South America, USA and Asia-Pacific. We are seeking a Mechanical Engineer, based out of our Phoenix office. This position is responsible for the engineering and discipline project design activities relating to concept, pre-feasibility, feasibility studies, EPCM and EPC projects. Main functions include (but not limited to): design engineering, technical support, package management, site support, commissioning, and documentation and handover. Engineering Carries out innovative detailed designs as required for specific disciplines following good engineering practices Designs conveyor and piping systems in area of responsibility (checked by relevant BMH or piping technical lead) Ensures that the quality of discipline designs are carried out in accordance with client standards and specifications, industry standards and the relevant legislation Provides design interface between disciplines Ensures certified design information received from vendors, contractors and consultants is accurate and interfaces with other designs Ensures the effective peer review and approval of discipline design Ensures continuous improvement, lessons learnt, value engineering, fit for purpose and latest technologies are implemented Is responsible for the engineering discipline sign off Interfaces with internal and external design and drafting disciplines Provides discipline inputs for studies and proposals Provides engineering support to the site team Performs commissioning discipline activities Manages the mark-up and back droughting of redline drawings Operational Management Provides input into all SHE matters, actively participates, and promotes a total safety culture. Ensures that relevant project procedures are complied with Ensures that fabrication, manufacturing, and construction drawings are issued according to the project programmer Manages the time schedule, cost, quality, risk and scope of assigned procurement packages. Ensures assigned packages are installed / constructed in accordance with the project & vendor specifications Manages, inspects and releases the relevant items of procurement, fabrication and construction within area of discipline and responsibility Participates in the Total Safety Culture of DRA and site safety requirements Assists with the commissioning of the assigned packages in accordance with the project & vendor specifications Ensures that reports are structured, accurate, complete and well presented Displays proactive communication with project team with respect to discipline interface and problem solving Financial Manages personal and design/droughting budget man-hours Manages budget as allocated per discipline/procurement package Ensures designs produced are in accordance with capital budget and quantities Ensures suitable contract management is applied to managed procurement packages Ensures proper change management procedure is adhered to Client Relations Ensures that all interactions with Clients are conducted in professional and respectful manner Ensures that Clients are kept informed and updated on the technical aspects of the project Ensures that DRA remains the Clients engineering service provider of choice Liaises and co-ordinates with the client's discipline engineers to ensure adherence to project and client requirements and specifications PHYSICAL REQUIREMENTS/CONDITIONS While performing duties of this job, you may be required to stand, sit, alternate between sitting and standing, push/pull as necessary, reach overhead or below shoulder level, kneel, squat, stoop, crawl, and work at heights utilizing proper fall protection. Ability to access all areas of the job site and conduct physical evaluations of grounds and equipment including ability to work at high elevations. Personal protective equipment may be required when performing work on-site, including hard hat, hearing protection, safety glasses, safety footwear, and as needed, respirator, protective clothing, gloves, and any other PPE as required. Work may be performed on an active mining construction site with various associated risks. EDUCATION/SKILLS/EXPERIENCE REQUIRED Experience of onsite construction and commissioning experience within a multi-disciplinary team in Industrial, Mining & Minerals, Oil & Gas, or equivalent environment. Bachelor's degree in mechanical engineering preferred. Registered as a licensed Professional Engineer in the state of Arizona - desirable. Note: This position is hybrid to Phoenix, AZ with onsite presence required at our Tucson site***** DRA Global is committed to building a diverse and inclusive workplace where everyone feels valued and supported. We believe that diversity strengthens our ability to reach our goals, enhances our reputation, and helps us attract, engage, and retain great people. We welcome applications from individuals of all backgrounds, regardless of gender, age, disability, ethnicity, or any other characteristic. Our values - People, Safety, Trust, Integrity, Excellence, and Courage - reflect our ongoing commitment to equal opportunities and an inclusive culture.

About the Company Prime Data Centers develops, acquires, and operates data centers for some of the world's largest enterprises. A private firm owned by a group controlling $6 billion in assets, with a 15-year tenure in technology and real estate development, Prime provides customers with ownership options and dynamic leasing models, defining a true corporate partnership. ************************ Onsite: Avondale, AZ About the Role The Project Engineer assists the product delivery team in performing focused tasks to support the construction lifecycle. The Project Engineer must be able to use Microsoft Office (Excel, Word, PowerPoint) and understand basic electrical and mechanical systems. They may be asked to focus on one or more of the following processes; generating a bill of material, preparing and reviewing submittals, soliciting quotes, performing basic quantity takeoffs, assembling PowerPoint presentations from multiple source documents, and printing, storing and retrieving design and engineering documents in the Document Management System. Responsibilities Collaborate with internal teams and external vendors to design, implement, and commission data center infrastructure projects. Translate technical requirements into project plans, schematics, and documentation. Ensure all work complies with design specifications, industry standards, and safety regulations. Support the deployment of power (UPS, generators, PDUs), cooling (CRAC/CRAH, HVAC), and structured cabling systems. Participate in capacity planning, risk analysis, and impact assessments for changes to the data center environment. Monitor installation progress, troubleshoot issues, and ensure quality control throughout the project lifecycle. Track project milestones, timelines, and budgets in coordination with project managers. Prepare and present technical reports, updates, and recommendations to stakeholders. Assist in vendor selection, procurement, and contractor supervision as needed. Maintain detailed records of system designs, configurations, and installations. Ensure compliance with industry regulations and internal standards. Qualifications Required: Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related technical field 3+ years of experience in data center engineering, construction, or operations Strong understanding of mission-critical infrastructure (power, cooling, cabling, network) Familiarity with data center design standards and best practices Proficiency in project tools such as AutoCAD, MS Project, or similar Excellent communication, documentation, and organizational skills Preferred: Certifications such as CDCP, DCDC, PMP, or equivalent Experience with hyperscale or colocation environments Working knowledge of commissioning processes and testing protocols Benefits: Competitive salary ($90-$105K) and performance bonus program 401k fully vested upon enrollment, up to a 4% employer match 100% employee premiums paid by employer for medical, dental, vision, life insurance, and disability Paid Time Off + Sick time Applications will be accepted on an ongoing basis. Prime is an Equal Opportunity Employer. All applicants are considered for employment without attention to race, color, age, religion, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender identity or expression, genetic information, ancestry, national origin, citizenship, protected veteran or military status, disability status, or any other classification protected by federal, state, or local laws and ordinances.

Job Title: Manufacturing Engineer 4 Duration: 3+ Months Job Type: Temporary Assignment Work Type: Onsite Pay Rate: $60.00-$60.00/hr TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients worldwide. Job Description: As a Sr. Manufacturing Engineer, GA Dimensional Engineering, you will be responsible for ensuring that all manufactured parts and assemblies meet precise dimensional specifications and quality standards. The ideal candidate will possess advanced knowledge in dimensional measurement, quality control processes, and the ability to interpret technical drawings, blueprints, and CAD models. You will work closely with the design team to design fixtures that are functional, accurate, efficient, and cost-effective. Purpose of the Team: This team is a part of the Manufacturing & Engineering umbrella. Their main focus is on quality standards of client products. The team will identify any product changes, contacts vendors companies for parts, place Purchase Orders and design any new equipment required for manufacturing. After finalization, the team will hand-over the updated products to maintenance and manufacturing team to put into production. The day to day will never replicate one another and there are constant changes happening on the team. Key projects Typical task breakdown and operating rhythm Compelling Story & Candidate Value Proposition Unique Selling Points: This role is an opportunity to work in a brand new role at client. This allows the opportunity to build how the role from the ground up and have ownership on responsibilities. This team is at the forefront on innovation and this role allows the ability to workshop new ideas in tech Candidate Requirements Years of Experience Required: 5 overall years of experience in the field. Degrees or certifications required: Bachelor's Degree in Engineering, STEM or related field, or equivalent relevant education preference Disqualifiers: Candidates not local to Arizona & do not have hard skill requirements. Best vs. Average: Ability to cross-collaborate and provide innovative thinking and ideas. Performance Indicators: Performance will be assessed based on meeting deadlines and quality of work. Top 3 Hard Skills Required + Years of Experience Minimum 5 years experience with Strong level GD&T qualification (Geometric Dimensioning & Tolerance) Minimum 5 years Experience with CAD software (AutoCAD, SolidWorks, or similar) Minimum 5 years experience with Strong analytical skills with a focus on detail and accuracy Hard Skills Assessments Expected Dates that Hard Skills Assessments will be scheduled: ASAP Hard Skills Assessment Process: The assessment process will include 2 rounds - 1 with a teammate, 1 with manager Required Candidate Preparation: N/A Responsibilities Blueprint & CAD Interpretation: Read and interpret technical drawings, blueprints, CAD models, and other design documents to ensure proper measurements and tolerances are understood and adhered to in the production process Fixture Integration: Understanding how fixtures integrate with other manufacturing equipment, robots, conveyors, and tools, ensuring smooth operation across the assembly line Process Flow and Ergonomics: Ability to design fixtures that align with the assembly line's process flow, ensuring they're easy to use for operators and don't create bottlenecks Work with cross-functional teams to recommend, evaluate and make design and process improvement proposals Work closely with design and manufacturing engineers to develop, validate and incorporate Geometric Dimensioning & Tolerancing (GD&T) requirements Collaboration: Collaborate with design, manufacturing, and engineering teams to provide technical input on design feasibility, manufacturability, and dimensional considerations GD&T Application: Expertise in interpreting and applying GD&T standards to fixture design, ensuring that parts fit and function according to precise dimensional specifications Tolerance Stack-up Analysis: Ability to evaluate and minimize tolerance stack-ups in the fixture design, which can affect the final assembly's quality and performance You bring: Bachelor's Degree in Engineering, STEM or related field, or equivalent relevant education and experience. Minimum of 5 years of experience in a dimensional engineering role, preferably in a manufacturing or production environment Strong level GD&T qualification Software Skills: Experience with CAD software (AutoCAD, SolidWorks, or similar) and measurement analysis software is a plus Problem-Solving Abilities: Strong analytical skills with a focus on detail and accuracy. Ability to identify and resolve dimensional and quality issues Communication: Excellent communication skills to work effectively with team members, management, and external vendors Certification in dimensional measurement or quality control (e.g., Certified Quality Engineer (CQE), Six Sigma) Experience with advanced metrology tools and techniques Familiarity with Statistical Process Control (SPC) and other quality management systems TekWissen Group is an equal opportunity employer supporting workforce diversity.

**Compensation is between $85,000 to $95,000 DOE** **Hiring Bonus** At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our CA locations. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer #MV-L1

Job Opportunity - Manufacturing Engineer - Electronics Manufacturing (Solar) - Phoenix, AZ I'm looking for a skilled Manufacturing Engineer with demonstrated experience - particularly from the solar industry - to help accelerate my client's manufacturing processes for new product introduction. This person will work closely with the Operations and Product Development teams to identify and lead cost reduction steps, quality improvement efforts, and help develop and test the functionality of electrical test equipment for manufacturing. Key Responsibilities: Identify and lead cost reduction steps and quality improvement efforts (ie labor, materials, etc) Test the functionality of electrical equipment based on system diagrams and test parameters Create conceptual designs for internal test equipment using block diagrams, circuit schematics, and test boards Travel as need be to solar tracker sites to perform troubleshooting, commissioning, retrofitting, and other technical support. Requirements: Bachelor's degree or equivalent in Electrical Engineering, Industrial Engineering, or similar (Electronics) At least 3 years' experience in manufacturing engineering, preferably with similar product type (solar/renewable hardware, electronics, motor controllers, etc) Knowledge of electronic product assembly processes and best practices. Experience optimizing manufacturing processes & DFM Experience with designing test fixtures & assemblies If this sounds like you & piques your interest, don't hesitate to apply here or reach out to me directly at ***************************** with your resume. ~Not accepting Visa sponsorships for this role - US Citizens & Green Card Holders only~ Job Opportunity - Manufacturing Engineer - Electronics Manufacturing (Solar) - Phoenix, AZ

Our client is a well-established heavy-civil contractor that is rapidly expanding its water and wastewater portfolio across Arizona. With several job-order-contract (JOC) awards in hand and a robust pipeline of municipal and private-sector work, they are adding a Project Engineer who is eager to learn every phase of project delivery and grow into a future Project Manager. If you thrive on fast-moving projects that improve community water systems, this is your chance to join a high-impact team with clear advancement potential. Key Responsibilities Synchronize RFIs, submittals, and field logs to keep project documentation current and audit-ready. Team up with site leaders to track milestones, crew resources, and short-interval schedules that keep multiple jobs on time. Support JOC pursuits by assembling estimates, scope narratives, and proposal clarifications for quick-turn projects. Validate vendor invoices and crew timecards, flagging cost variances and assisting with monthly pay applications. Own safety walk-downs while helping compile start-up, commissioning, and turnover packages for project close-out. What You'll Work On Water and wastewater treatment upgrades, pump stations, and distribution pipelines. Fast-track JOC assignments ranging from $150 K to $1.2 M, often 4- to 6-week cradle-to-grave cycles. Occasional travel throughout the Valley and northern Arizona for site visits (primarily day trips). Qualifications 1+ year of construction experience (internships count) with exposure to project coordination or controls. Bachelor's degree in construction management, Civil / Mechanical Engineering, or similar. Familiarity with construction software such as Procore and Foundation; Primavera or CAD exposure is a plus. Strong communication, organization, and multitasking skills; passion for continuous learning. Compensation & Benefits Competitive base salary plus 5 - 15 % bonus tied to project performance. 401(k) match, medical/dental/vision, HSA option, and 10+ PTO days. Professional development budget, tuition reimbursement, and structured mentorship. Why This Role Ground-floor growth: help build a new water division backed by leadership with a successful heavy-civil track record. Broad exposure: estimating, scheduling, field coordination, and client interface-own the full project life-cycle early. Clear runway: defined path to Assistant PM and Project Manager roles as the group scales regionally. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Title: Construction Cost Engineer Duration: 6-month contract (possibility for extension or conversion) Pay Rate: $50-$55.55/hr Job Description: We are seeking a Construction Cost Engineer to support the construction and commissioning of a large, high-tech industrial manufacturing project in the Southeast Phoenix metro area. This role will report to the Cost Manager and work closely with Construction Managers to ensure accurate cost controls and effective change management processes. Key Responsibilities: Review and process change orders and RFIs to ensure scope accuracy. Perform detailed breakouts for material, labor, equipment, and profit. Assign cost codes, confirm budget impacts, and prepare changes for internal approval. Utilize project management tools such as Procore and Smartsheets for cost tracking and reporting. Collaborate with clients and subcontractors to confirm information accuracy and respond to requests. This is a contract position with potential for extension or conversion based on performance and project needs. Qualifications: Required Skills & Experience: High school diploma or GED. 2+ years of experience on large industrial construction projects (e.g., data centers, semiconductor fabs, battery plants) with budgets ranging from $100M to $1B+. Strong knowledge of construction cost controls, including: Job cost reports Change management RFIs Budgets and commitments Contingencies and spend tracking Bid packages and field orders Category management Cost authorization packages Material quantity reporting Proficiency with construction PM software such as Procore and Smartsheets. Nice to Have: Bachelor's degree in a related field. LEED Certification.

As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site. Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques. Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts and purchase orders. Assist in the procurement of equipment and materials, and track and expedite their delivery. Track and evaluate subcontractor and vendor performance. Interact with subcontractors and vendors regarding technical and contractual matters. Estimating/ Preconstruction Services: Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: Bachelor's degree in construction management, engineering, or other relevant technical discipline. 0-3 years of relevant construction internship or post-undergraduate experience. The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply. Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees. Problem solving and critical thinking skills. Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Basic Qualifications Education Requirements: Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 8+ years of job-related experience, or a Master's degree plus 6+ years of job-related experience. Clearance Requirements: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: $10k sign-on bonus (for TEMPEST Certified Candidate) GDMS Relocation Package Available This position is 2nd shift, flexibility between 2:30-3:30pm start time to 11pm for standard 40hr work week. Will adjust if 9/80 schedule is preferred General Dynamics Mission Systems has an immediate opening for an experienced TEMPEST Test Support Specialist. As a member of the EMI/TEMPEST Group the candidate will perform TEMPEST testing and support the development of TEMPEST Test Plans/Reports for a wide variety of tactical communications systems, rugged communications equipment, and computer equipment for military applications. Products range from tabletop subsystems to large complex vehicular systems. This position provides an opportunity to further advance the cutting-edge technology that supports some of our nation's core defense/intelligence services and systems. General Dynamics Mission Systems employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. We encourage you to apply if you have any of these preferred skills or experiences: 1) Currently a Certified TEMPEST Professional Level I or II; 2) Have the required training /experience to obtain TEMPEST Certification within 12 months; 3) Familiar with testing in accordance with TEMPEST/1-92, CNSSAM TEMPEST 01-02, and/or MIL-STD-461. What sets you apart: Familiarity with a variety of test equipment including EMI/TEMPEST Receivers, Oscilloscopes, Spectrum Analyzers, Network Analyzers, Signal Generators, etc. Experience with developing or reviewing TEMPEST Test Plans and Reports. Perform TEMPEST testing in accordance with the applicable standards. Experience working in a lab environment including troubleshooting test issues/failures and recommending solutions. Manage equipment calibrations and repairs. Candidate must be able to work in a team environment and collaborate across programs and shifts. Candidate must be able to work independently, communicate clearly, and effectively with employees and customers. Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site. While on-site, you will be a part of the GDMS EMC/TEMPEST Group in Scottsdale, Arizona Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $126,862.00 - USD $137,269.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. As a Systems Engineer for the SDA GMI program, you'll be a member of a cross-functional team responsible for developing and deploying the state-of-the-art ground operational system. We encourage you to apply if you have any of these preferred skills or experiences: Ground system design or scheduling knowledge Tracking mission design knowledge Satellite communications knowledge Ground to Satellite communication knowledge System/Software design for cloud-based microservice architecture Learn more about the SDA Program - Featured Job Opportunities - SDA (gdmissionsystems.com) What sets you apart: Success leading the systems development life cycle with strong proficiency with requirements management and system modeling tools Creative thinker motivated to apply technical standards and methodologies to develop solutions Collaborative team player with the ability to provide technical leadership and position others for success Strong presentation and communications skills with experience in the art of negotiation and the ability to meet challenging customer requirements with win-win solutions Commitment to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more Workplace Options: This position is fully on-site, OR Hybrid/Flex While on-site, you will be a part of the Scottsdale location facility Target salary range: USD $101,357.00/Yr. - USD $109,672.00/Yr. This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Additional Qualifications/Responsibilities Basic Qualifications Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 5+ years of job-related experience, or a Master's degree with 3+ years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. . Internship Opportunity - Heavy Civil Construction We are seeking motivated interns to join our heavy civil construction team. This role provides hands-on experience supporting large-scale projects while working alongside experienced professionals in the field. Interns will assist with project coordination, technical reviews, safety monitoring, and communication with multiple stakeholders, including owners, design partners, subcontractors, and field crews. Key Duties and Responsibilities * Instill Safety as a top priority. * Support a team of construction coworkers. * Build relationships and communicate with coworkers, owners, design partners, and subcontractors. * Review and draft technical submittals such as schedules, shop drawings, work plans, etc. * Monitoring quality control, safety, and environmental programs. * Understand and assist with project layout. * Identify critical work items and procure long-lead items. * Assist with contract administration, including budget and change procedures. * Assist with material procurement, including logistics. * Work together to resolve field problems and conflicts with subcontractors, suppliers, and the workforce. * Maintaining as-built drawings & manuals. Experience, Education & Skills Preferred * Strong communication skills, both written and oral. * Good attention to detail with the ability to recognize discrepancies. * Pursuing a degree in Construction, Civil Engineering, or Construction Management, or equivalent experience. * Desire to grow and develop a career and mentor other coworkers. * Must have a valid Driver's License. . . Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the Southwest. We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! Detailed Description: How Will You Make an Impact?: Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with people managers, project managers, engineers, scientists, and multidisciplinary teams to support projects in water, wastewater, drinking water, environmental engineering, design, sustainability, climate mitigation, and more. * Assist in the preparation of technical deliverables including but not limited to calculations, reports, drawings, specifications, and memoranda. * Potential to participate in field work and site visits to support project design, construction, and data collection activities. * Perform data entry, analysis, and visualization to support engineering and scientific evaluations. * Ensure quality and accuracy by adhering to Brown and Caldwell's QA/QC processes and standards. * Communicate effectively with internal teams and external clients to coordinate project tasks and deliverables. * Support engineering services during construction by reviewing submittals, conducting inspections, and verifying conformance with plans and specifications. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in Environmental, Civil, Mechanical, Structural, Electrical, Chemical Engineering or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act. #Intern26

mechanical analysis, mechanical CAD design, mechanical testing of complex materials, structural components, or functional systems for the aerospace/DoD industry. Seeking candidates with skills in CAD software, preferably Siemens NX, and apply GD&T principles to designs. Essential Skills Proficiency in mechanical design and CAD software, preferably Siemens NX. Knowledge and experience with geometric dimensioning and tolerancing (GD&T ASME Y14.5). Experience in the aerospace or DoD industry 5 years of mechanical engineer experience with daily use of GD&T. Ability to obtain a DoD Secret security clearance. (Great opportunity to start obtaining your clearance from day one of employment) Job Type & Location This is a Contract to Hire position based out of Phoenix, AZ. Pay and Benefits The pay range for this position is $48.07 - $62.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Phoenix,AZ. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Required Skills & Experience High school degree or GED 2+ years of experience working on large industrial construction projects such as datacenters, semiconductor fabs, battery plants, etc. Projects with total budgets in the $100Ms to $1B+. Experienced with construction cost controls such as maintaining job cost reports, change management, RFIs, budgets, commitments, yet to buys, contingencies, spend, bid packages, field orders, category management, cost authorization packages and quantities of materials reports. Experienced with construction PM software such as Procore and Smartsheets. Nice to Have Skills & Experience Bachelor's Degree LEED Certified Job Description An Insight Global customer is looking to hire a cost engineer to join their team. The customer is actively supporting the construction and commissioning of a large, high-tech, industrial manufacturing project in the SE Phoenix metro area. This person would report to the cost manager and also work closely with construction managers to process, manage and follow up on change orders and RFIs. The person in this role can expect to work through the company's software tools like Procore and Smartsheets to conduct general overview of change orders by ensuring that the scope matches the RFI. Then perform material, labor, equipment and profit breakouts, assign cost codes, confirm budget impacts and prepare the changes for the internal approval process. There may also be interactions with the customer's end client and subcontractors to respond to requests and confirm information accuracy. This is a six month contract, but there is the possibility for conversion or extension at the end of the initial engagement.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know This position will service our clients in Phoenix, AZ. Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2024 Best Places to Work - Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2024 ENR Midwest - Midwest Contractor (#1). 2024 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2024 ENR Top 100 Green Contractors - Green Contractor (Top 5). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Basic Qualifications Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 5+ years of job-related experience, or a Master's degree with 3+ years of job-related experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position ROLE AND POSITION OBJECTIVES: As a Systems Engineer for the SDA GMI program, you'll be a member of a cross-functional team responsible for developing and deploying the state-of-the-art ground operational system. We encourage you to apply if you have any of these preferred skills or experiences: Ground system design or scheduling knowledge Tracking mission design knowledge Satellite communications knowledge Ground to Satellite communication knowledge System/Software design for cloud-based microservice architecture Learn more about the SDA Program - Featured Job Opportunities - SDA (gdmissionsystems.com) What sets you apart: Success leading the systems development life cycle with strong proficiency with requirements management and system modeling tools Creative thinker motivated to apply technical standards and methodologies to develop solutions Collaborative team player with the ability to provide technical leadership and position others for success Strong presentation and communications skills with experience in the art of negotiation and the ability to meet challenging customer requirements with win-win solutions Commitment to ongoing professional development for yourself and others Our Commitment to You: An exciting career path with opportunities for continuous learning and development. Research oriented work, alongside award winning teams developing practical solutions for our nation's security Flexible schedules with every other Friday off work, if desired (9/80 schedule) Competitive benefits, including 401k matching, flex time off, paid parental leave, healthcare benefits, health & wellness programs, employee resource and social groups, and more See more at gdmissionsystems.com/careers/why-work-for-us/benefits Workplace Options: This position is fully on-site, OR Hybrid/Flex While on-site, you will be a part of the Scottsdale location facility #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $101,357.00 - USD $109,672.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job Title: Mechanical EngineerJob Description We are seeking a dedicated Mechanical Engineer to concept and design turnkey fully automated solutions. These designs will closely adhere to customer-defined scopes of work and our design standards, incorporating motion products, pneumatics, robotics, machine vision, parts feeders, weldments, and tooling. A robust understanding of tooling and fixturing, as well as experience with robotics and other motion systems, is highly desirable. Responsibilities + Perform SolidWorks conceptual and design activities as needed. + Design and maintain system 3D models and drawing packages. + Maintain relationships with customers and provide updates on project schedules, status, and organize meetings. + Assist with customer site visits, onsite service, installation, and other customer project-related tasks. + Update and create operation manuals for software, equipment operation, and general operator interface as needed. + Assist with mechanical assembly, debugging, troubleshooting, and testing as required. Essential Skills + Bachelor's degree in Mechanical Engineering or related field, or at least 4+ years of industry experience. + Strong knowledge of mechanical designs, tolerances, stack-ups, and FEA analysis. + 4+ years of experience in concept and design of turnkey fully automated solutions. + 4+ years of experience in tooling and fixture design. + 3+ years of experience using SolidWorks with an 8+/10 proficiency level. + 2+ years of experience in mechanical assembly, debugging, troubleshooting, and testing. + 3+ years of experience incorporating motion products, pneumatics, robotics, machine vision, parts feeders, weldments, and tooling. + 3+ years of experience designing and maintaining system 3D models and drawing packages. Additional Skills & Qualifications + Automation design and SolidWorks proficiency. + Experience with 3D models, tooling, and fixtures. Work Environment The position is located in a brand new facility in Gilbert with onsite manufacturing focusing on robotics and automation for OEMs across various industries. The team consists of approximately 40 professionals, mostly engineers. The company culture is outgoing and positive, offering project ownership and the opportunity to learn extensively in a relatively small company setting. Job Type & Location This is a Contract to Hire position based out of Tempe, AZ. Pay and Benefits The pay range for this position is $90000.00 - $110000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tempe,AZ. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.