Engineering associate jobs in Centreville, VA

Cydecor is a premier Federal Government solutions provider, delivering differentiated innovations in mission systems and business platforms. We leverage leading-edge secure systems and software development, backed by industry-leading subject matter expertise, and business intelligence to enable decision-support and remain ahead of ever-evolving national security challenges. Our success rests squarely on three bedrock principles: People, our center of gravity; Mission, what inspires us; and an unyielding commitment to Excellence, what separates us. Job Description: Cydecor is seeking a Navy Mechanical Engineer to provide support to a Naval Sea Systems Command (NAVSEA) customer. There are several openings spanning junior to senior positions. The role will support the design, development, and evaluation of Unmanned Vehicle (UxV) systems by conducting engineering analyses, addressing technical issues, and contributing to future UxV requirements and acquisition documentation. Candidates should possess strong engineering and acquisition fundamentals, as well as expertise UxV systems. Responsibilities include: Work will involve conducting review and analysis of UxV designs, addressing technical issues that arise during design and construction, and development of the future UxV requirements and acquisition documents. Perform engineering analyses of customer mission and performance requirements to define UxV attributes in engineering terms. Perform ship design and construction Contractor and Subcontractor engineering and production analyses to include but not limited to physical progress, design progress and material procurement. Review of engineering systems' technical data, engineering drawings, technical manuals, ILS data, ILS Checklists, and configuration baseline documentation to determine the changes required to update requirements and assist in establishing the new baseline specified by contract, contract specifications, engineering drawings, technical manuals, and specifications. Conduct a review and analysis of UxV designs, addressing technical issues that arise during design and construction, and in the development of the future UxV requirements and acquisition documents. Perform engineering analyses of customer mission and performance requirements to define UxV attributes in engineering terms. Here's what you need: Senior Level: 10 years of professional experience and a bachelor's level degree in Mechanical Engineering. Mid-Level: 4 years of relevant experience and a bachelor's level degree in Mechanical Engineering. Junior Level: 1 years of relevant experience. Relevant mechanical engineering experience related R&D, T&E, and systems acquisition programs. Bonus points if you have: Senior Level: 15 years of professional experience and a master's level degree in Mechanical Engineering. Mid-Level: 7 years of relevant experience and a master's level degree in Mechanical Engineering. Junior Level: 4 years of relevant experience and a bachelor's level degree in Mechanical Engineering. Professional Engineer License Relevant mechanical engineering experience related R&D, T&E, and systems acquisition programs for Navy shipbuilding and defense systems. Security Clearance: Active/interim DOD SECRET Education: Bachelor's degree in Mechanical Engineering or related field. Master's preferred. Work Schedule: M-F, Onsite Compensation and Benefits: The projected compensation range for this position is $83,500 - $185,000. There are numerous factors that can impact a final salary/hourly rate including, but not limited to, relevant work experience, skills and competencies that align to the role, work location, education/certifications, and a contract's Labor Categories. Cydecor offers a comprehensive compensation package including Health and Dental Insurance, Vision and Life Insurance, Short-Term & Long-Term Disability, 401(K) company match, Paid Time Off (PTO), Paid Company Holidays, Tuition Assistance Program and more. What We Believe We have an unwavering commitment to diversity with the aim that every one of our people has a full sense of belonging within our organization. As a business imperative, every person at Cydecor has the responsibility to create and sustain an inclusive environment. Equal Employment Opportunity Statement Cydecor is an Equal Employment Opportunity/Affirmative Action Employer (EEO/AA). All employment and hiring decisions are based on qualifications, merit, and business needs without regard to race, religion, color, sexual orientation, nationality, gender, ethnic origin, disability, age, sex, gender identity & expression, veteran status, marital status, or any other characteristic protected by applicable law. If you are a qualified individual with a disability and/or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site because of your disability. You can request assistance by contacting [email protected] or calling 703-###-####.

We are seeking a senior Mechanical Engineer to support our Washington, DC office. Candidate will review and analyze UxV designs, support design and construction activities, and assess contractor engineering and production progress. Responsibilities include evaluating technical data, drawings, manuals, and configuration documentation to ensure alignment with contract and system requirements. What will you do? Conduct a review and analysis of UxV designs, addressing technical issues that arise during design and construction, and in the development of the future UxV requirements and acquisition documents. Perform engineering analyses of customer mission and performance requirements to define UxV attributes in engineering terms. Perform ship design and construction Contractor and Subcontractor engineering and production analyses to include but not limited to physical progress, design progress and material procurement, Review of engineering systems' technical data, engineering drawings, technical manuals, ILS data, ILS Checklists, and configuration baseline documentation to determine the changes required to update requirements and assist in establishing the new baseline specified by contract, contract specifications, engineering drawings, technical manuals, and specifications. Do you have what it takes? Required skills: Bachelor's level degree in Mechanical Engineering. 10 years - 15 years of professional experience Relevant mechanical engineering experience related R&D, T&E, and systems acquisition programs. Must have active DoD Secret Clearance and ability to sustain one Preferred skills: Master's level degree in Mechanical Engineering Professional Engineer License 15 or more years of professional experience Relevant mechanical engineering experience related R&D, T&E, and systems acquisition programs for Navy shipbuilding and defense systems. Pay Range: VTG's estimated starting pay range is $85,000-$150,000 annually, which is a general guideline for the geographic location. When extending an offer, VTG also considers work experience, education, skill level, market considerations and may possibly include contractual requirements which may cause an offer to fall outside of this range. *This position is contingent upon contract award Pay Range: VTG's estimated starting pay range is $85,000-$150,000 annually, which is a general guideline for the geographic location. When extending an offer, VTG also considers work experience, education, skill level, market considerations and may possibly include contractual requirements which may cause an offer to fall outside of this range.

If you're a Project Engineer who's already managing subs, tracking costs, and keeping projects on schedule - but still don't have the APM title - this is your chance to make the move. One of our GC clients in the DC metro area is hiring a local PE to step into an APM-level role on multifamily projects. These are complex, design-forward jobs ranging from $10M-$50M, and the team is looking for someone who can hit the ground running and grow quickly. You might be a fit if: You've been working for a GC for the last 2-4 years You've supported projects in the multifamily and vertical commercial construction sectors You're already managing RFIs, submittals, change orders, and coordinating with supers and subs You've been trusted with owner updates, internal meetings, or closeout tasks You're based in Washington, DC or nearby (this is a local role only) Responsibilities Assist with on-site management to ensure project success Ensure project plan is moving forward to meet anticipated deadlines Responsible for RFI and submittal process Processes owner billings and project related accounting issues Qualifications Bachelor's degree in Construction Management or equivalent experience 2-4 years of experience as a project coordinator, project engineer, or assistant project manager Strong experience in AutoCad and Microsoft Office Suite Familiarity with rules, regulations, best practices and performance standards

John Moriarty & Associates of Virginia (JMAV) is seeking a full-time Project Engineer (PE) to support construction project execution from preconstruction through closeout in the Washington, DC metro area. The PE will assist with scheduling, procurement, subcontractor coordination, document management, and project logistics. The PE should be located within daily driving distance of the Washington, DC metro area and can expect to travel between different jobsites as needed. Roles & Responsibilities: The Project Engineer will work closely with the PM and site team on a wide range of tasks, including: Management of assigned trades in all facets of preconstruction to include quantity take-offs, preparation of bid packages, and buy-out Oversee performance of assigned trades, including project status, schedule, cost control, change management systems, and maintain relationships with clients, designers, and consultants Supporting the creation and maintenance of project schedules Assisting with submittals, RFIs, and change order processing Coordinating project documentation and digital records Communicating with subcontractors and vendors Education: 4-year degree in Construction Management or related field required Work Experience: 3-5 years of experience required, in commercial construction is preferred Knowledge, Skills, and Abilities: Strong critical thinking and proactive problem-solving abilities Highly organized with attention to detail Effective communicator and team collaborator Strong multitasking and decision-making skills Ability to travel daily across DC-Metro area jobsites Proficiency in Microsoft Office and construction platforms Physical Requirements: Moderate physical activity; driving, walking rough terrain, climbing stairs/ladders Work Environment: Onsite, outdoor work in all weather conditions; moderate to loud noise exposure The Company: John Moriarty & Associates of Virginia (JMAV) is a privately held general contractor that specializes in large-scale, urban, ground-up projects such as mixed-use, multi-family, hotels, senior living, student housing, and bio-medical in the DC-Metro area. Exceptional for the industry, the majority of our projects are negotiated with over 85% being with repeat clients. Our approach is characterized by transparency, collaboration, attention to detail and hands-on leadership. Our projects are set up for success by our strong emphasis on pre-construction services and planning, proper staffing and hiring best-in-class subcontractors. Our growth has been a result of outstanding execution in every phase of project delivery and an unparalleled employee retention of the industry's best talent. Our parent company, John Moriarty & Associates (JMA), was founded in 1985 in Winchester, MA and is one of the most respected general contracting firms in the industry. Learn more about us at ************** and ************* John Moriarty & Associates of Virginia participates in E-Verify for all hired employees. E-Verify is a web-based system that allows enrolled employers to confirm the eligibility of their employees to work in the United States by electronically matching information provided by employees on the Form I-9 against records available to the Social Security Administration and the Department of Homeland Security. More information can be found at *****************

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents • Company paid Dental and Vision • 401(k) with company match • Short-term and Long-term disability - Company paid • Life Insurance and AD&D - Company paid • Voluntary Spouse and Child Life Insurance • Paid time off with company holiday • Tuition Reimbursement • Employee Assistance Program (EAP) *Benefit eligibility is set forth in benefit plan documents and organization policies. Description Join Delphinus Engineering and you'll have the opportunity to begin a rewarding career working on a wide variety of important and challenging projects that make a real impact. Delphinus Engineering offers an empowering professional environment in a culture that stresses teamwork, independence, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, education opportunities, outstanding employee benefit options, and 401(k) plan with company match. GENERAL SUMMARY: Provide engineering and technical services to include but not limited to: technology insertion; performance specifications; system integration; installation support; on-site technical support, and alteration/repair support services in support of surface fleet, submarine, and shore-based installations in support of Hull, Mechanical and Electrical (HM&E) machinery and systems support to the US Navy. This position will be on-site work only. LOCATION: West Bethesda, MD. PRINCIPAL DUTIES/RESPONSIBILITIES: Provides support to Naval personnel with the removal, installation, modification, repair, and troubleshooting of various HM&E Systems and components. Has knowledge of commonly used concepts, practices and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the function of the job. Must be able to read and interpret drawings and technical manuals. Must be able to successfully pass a criminal background check, drug screening, and obtain and maintain a security badge for all military installations and civilian shipyards. REQUIRED EDUCATION: Bachelor's degree in Mechanical, Chemical, Environmental, Systems Engineering, or System Safety Engineering REQUIRED EXPERIENCE: Experience with the US Navy and environmental systems is preferred but not required Secret Security clearance preferred. Experience working with Environmental Systems is preferred but not required. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Exempt Req Number ENG-25-00014 This position is currently accepting applications.

Novateur stands for Innovation. We value creativity, vision, collaboration, and above all, ambition to innovate. Novateur Research Solutions is an R&D firm located in Northern Virginia, developing intelligent systems that push the boundaries of computer vision, AI, and large-scale learning. We are seeking Research Engineers to advance the state of the art in large-scale machine learning, spatiotemporal modeling, and multimodal reasoning. Our projects span object tracking, re-identification, geo-localization, chemical and biological defense, and scene understanding. You will work at the intersection of software engineering and applied research, turning novel algorithms into robust, deployable systems. Responsibilities: • Prototype and optimize algorithms in computer vision and machine learning. • Build scalable training and inference pipelines on cloud platforms (AWS EKS). • Perform data curation, model evaluation, and system integration. • Collaborate with academic and government research partners. Requirements: • BS or MS in Computer Science, Engineering, Applied Math, or related field. • Experience with PyTorch or TensorFlow and scalable model training. • Strong background in algorithms and software design. • Excellent communication and technical writing skills. • U.S. Citizen or Permanent Resident. Preferred: • Experience with geospatial data (PostGIS, GeoJSON, QGIS). • Familiarity with Kubernetes and distributed data systems. Why Novateur? Join a team that values creativity and initiative. Our engineers have freedom to innovate, collaborate with top researchers, publish research in major scientific conferences, and see their ideas deployed in impactful applications. Company Benefits: Novateur offers competitive pay and benefits comparable to Fortune 500 companies that include a wide choice of healthcare options with generous company subsidy, 401(k) with generous employer match, paid holidays and paid time off increasing with tenure, and company paid short-term disability, long-term disability, and life insurance. We offer a work environment which fosters individual thinking along with collaboration opportunities within and beyond Novateur. In return, we expect a high level of performance and passion to deliver enduring results for our clients.

Basic Qualifications Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent combination of education and relevant work experience, plus 2 years of relevant experience, or a Master's degree. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Job Requisition: Tester for the Payload Control System (PCS) Job Summary: The PCS Test and Integration Engineer will be responsible for testing and validating the Payload Control System (PCS), a critical component of our advanced defense solutions. The PCS supports various payloads, ensuring operational effectiveness and integration within broader systems. Key Responsibilities: Develop, implement, and execute test plans and procedures for the PCS to ensure it meets operational requirements and performance standards. Conduct system integration testing, including hardware and software components, to validate system functionality and interoperability within larger defense systems. Perform system troubleshooting and debugging to identify and resolve issues. Collaborate with cross-functional teams, including software developers, systems engineers, and other test engineers, to ensure comprehensive test coverage and effective issue resolution. Document test results, generate test reports, and communicate findings to stakeholders. Ensure compliance with relevant standards, regulations, and quality assurance processes. Support field testing and validation activities as required. Qualifications: Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent combination of education and relevant work experience, plus 2 years of relevant experience; or Master's degree. Proven experience in system testing and validation, preferably within defense or aerospace industries. Familiarity with the Payload Control System and integration within larger defense systems. Strong analytical and problem-solving skills. Strong communication and documentation skills. Ability to work collaboratively in a team-oriented environment. Desired Skills: Experience with advanced defense systems. Knowledge of various payloads and their integration. Proficiency in DOORs, automated testing tools, and scripting languages. Additional Responsibilities: Generation of system test work products by applying the appropriate standards, processes, procedures, and tools. Development of test and diagnostic programs, designs test fixtures and equipment, and completes specifications and procedures for new products. Development of functional, environmental, operational, and/or performance tests on hardware, software, and systems. What you'll experience: Technologies that aren't just top-notch, they're often top-secret. A team of bold thinkers committed to exploring what's next. Opportunities to gain new knowledge - as it's discovered. What you bring to the table: A Bachelor's of Science or Technology degree, a related specialized area or field (or equivalent experience) plus a minimum of 2 years of relevant experience; Demonstrate narrowly focused in-depth technical level of practical operational process knowledge in a specific engineering area. Demonstrate technical competence in the setup, monitoring, and documentation of experiments and/or lab equipment. Strong grasp of Navy maintenance procedures and philosophies, especially for combat systems. Openly proposes ideas that enhance productivity and efficiency, solicits input, and optimizes solutions. What sets you apart: Former U.S. Navy Fire Control Technician (FT) with experience on Virginia, Seawolf, Ohio, or 688-class submarines. Prior experience working with BYG-1, SWFTS, CIS, or CCE systems. Creative thinking with the ability to multi-task. Commitment to ongoing professional development. Team player who thrives in collaborative environments and revels in team success. About Us: Help make the technologies, products, and services that make a difference. That's the opportunity that's waiting for you at General Dynamics Mission Systems. We help our nation's heroes keep our nation safe by creating solutions so advanced, they redefine innovation for the world. It's an amazing challenge. And it's waiting for you now. Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $88,178.00 - USD $95,411.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the U.S. During the interview process, we will discuss specific details regarding the team and location. **Summary** As an **Autonomy & Robotics Engineering Intern** , you will work alongside a team of skilled engineers to support the development of **autonomous behaviors** , **machine perception** , and **robotic control systems** for **unmanned aerial systems (UAS)** and other advanced platforms. You'll gain experience in algorithm development, simulation, and integration on real hardware in a fast-paced, collaborative R&D environment. This internship provides a **hands-on opportunity** to apply your academic knowledge to cutting-edge autonomy applications, with mentorship and support from senior engineers. **Position Responsibilities** + Assist in the design, implementation, and testing of algorithms related to: + **Computer vision** , **object tracking** , and **target detection** + **Guidance, Navigation, and Control (GNC)** integrated with visual sensors + **State estimation** using inertial and visual data + **Autonomous behavior modeling** (e.g., finite-state machines, behavior trees) + **Path planning** and **multi-vehicle coordination** + Support the development and debugging of autonomy software on simulation platforms and real hardware + Collaborate with teammates on testing, data collection, and experimental design + Participate in code reviews and integration efforts across multidisciplinary teams + Document and present findings in internal reports or presentations + Perform other duties as assigned **Basic Qualifications (Required Skills & Experience)** + Currently pursuing a **Bachelor's or Master's degree** in **Computer Science, Aerospace, Electrical Engineering, Robotics** , or a related technical field + Coursework or project experience in areas such as **robotics, autonomy, or computer vision** + Proficiency in **C/C++** (modern standards like C++11 or later preferred) + Familiarity with **Python** and/or **MATLAB** for data analysis or prototyping + Interest in working with **UAS** , robotics, or autonomous systems + Strong analytical, communication, and problem-solving skills + Willingness to learn, collaborate, and work in a hands-on environment **Preferred Qualifications (Not Required but a Plus)** + Experience with **Robot Operating System (ROS)** + Familiarity with: + Vision-based perception (e.g., feature tracking, template matching, visual odometry) + Trajectory planning, GNC algorithms, or control systems + Embedded systems or low size, weight, and power (SWaP) devices + Exposure to **simulation tools** , **real-time systems** , or experimental robotics + Involvement in **robotics competitions** , clubs, or research projects **Additional Competencies** + Team-oriented mindset with strong collaboration skills + Comfortable asking questions and taking initiative to solve problems + Thrives in a dynamic, **deadline-driven** R&D environment + Demonstrates accountability and a commitment to continuous learning + Able to clearly communicate technical information to diverse audiences **Physical Demands** + Ability to work in an office and R&D lab environment (Constant) + Required to sit, stand, and use a computer for long periods (Frequent) + Occasional hands-on work with robotic systems, test setups, and hardware integration **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Applications are accepted until further notice. Meet the Team Our dedicated team is building the future of Cisco's AI-driven platforms and data infrastructure, driving innovation across the globe. You will join teams focused on developing advanced data pipelines, machine learning infrastructure, and analytics platforms for business-critical initiatives. As part of this collaborative environment, you will contribute to the advancement of emerging technologies in data and intelligent systems. Explore the opportunities at the intersection of backend engineering and AI, helping to transform how Cisco and its customers harness information and intelligent automation. Your Impact As a passionate software engineer, you bring expertise in developing scalable backend systems, designing robust analytics platforms, and building infrastructure to support modern cloud and distributed computing initiatives. Your strong background in programming, distributed systems, and cloud platforms enables you to solve complex challenges with innovation and precision. By building and maintaining key software tools and backend infrastructure, you empower Cisco's business groups to leverage AI and data-driven insights for operational excellence and strategic growth. Your contributions ensure high-quality, reliable platforms that support Cisco's leadership in intelligent, scalable technology solutions. Minimum Qualifications * Currently enrolled in a certification program (e.g., Boot Camp, Apprenticeship, Community College), or currently enrolled in an undergraduate degree program. * Proficiency in at least one backend programming language: C/C++, Java, or Go. * Experience designing and developing microservices and APIs. * Strong understanding of Linux and fundamental networking concepts (TCP/IP, DNS, DHCP). * Familiarity with cloud platforms such as AWS, Azure, or GCP. Preferred Qualifications * Conceptual understanding of AI/ML. * Experience with automation and software testing (e.g., py Test). * Familiarity with CI/CD pipelines. * Knowledge of networking protocols such as BGP and VLANs. ProductIntern26 Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. Message to applicants applying to work in the U.S. and/or Canada: Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: * 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees * 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco * Non-exempt employees receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees * Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) * 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next * Additional paid time away may be requested to deal with critical or emergency issues for family members * Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: * .75% of incentive target for each 1% of revenue attainment up to 50% of quota; * 1.5% of incentive target for each 1% of attainment between 50% and 75%; * 1% of incentive target for each 1% of attainment between 75% and 100%; and * Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $44,000.00 - $185,000.00 Non-Metro New York state & Washington state: $44,000.00 - $185,000.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements.

What do you get when you bring together a team of bright individuals and place them into an environment where “work” means making a difference in the lives of people across the globe? You get Sciolex Corporation, a fast-growing defense contractor focused on providing the U.S. Government a level of service that surpasses the epitome of excellence. Our core services include systems engineering technical advice, technical support, and administrative assistance. From our humble beginning as a small Service Disabled, Veteran Owned Small Business in Chantilly, VA, Sciolex Corporation is now the home for over 1,000 employees across the U.S. Over the past 15 years, Sciolex Corporation has constructed an environment that celebrates diversity and encourages a positive work/life balance, all while supporting government missions that our employees are proud to be a part of. When you work for Sciolex Corporation, you are working for a stable company that values you and is committed to ensuring you receive the utmost employee care. Responsibilities The IT Support Engineer (ITSE) will embrace the prospect of performing a wide variety of tasks at all levels of complexity - from advanced engineering of future infrastructures to deploying server software to providing low-level user account administrations and user support. The ITSE will be responsible for engineering, implementing, and overseeing all IT infrastructure upgrades, migrating to and maintaining technology services on Microsoft 365 and Azure, maintaining the IT baseline, ensuring compliance with NIST SP 800-171, positioning the company to achieve CMMC certification, and providing day-to-day IT support for users. As the ITSE, your responsibilities would include: Engineering Design and implement upgrades and migration from legacy infrastructure to a combination of cloud and on-premise services Conduct technical research and provide cost analysis data Recommend and implement the IT migration roadmap Manage Microsoft 365 cloud deployments and licenses Install server software, applications, upgrades, and maintenance patches Ensure network and system security practices comply with NIST SP 800-171 requirements Prepare network and system security practices for CMMC certification Maintain historical records by documenting hardware and software changes and revisions Prepare the corporate network for a multi-office, multi-location architecture Document and maintain corporate network deployment and topology Configure and maintain routers and gateways Monitor security and activity logs and provide periodic reports to the COO Support Resolve technical issues related to network interruptions Perform day-to-day system administration functions Manage SharePoint and Exchange applications and configurations Assist users with hardware issues related to desktop computers, printers, scanners, or handheld devices Create IT tickets using ticket-tracking software and update the status of each ticket as they successfully assist each user with their issues Create training materials/references pertaining to computer troubleshooting and usage Other duties as assigned Qualifications & Physical Requirements A bachelor's degree in Computer Science, Information Technology, or related technology field is preferred. 3-5 years of experience as an IT Engineer. 3-5 years of experience as an IT Support Specialist. Must have U.S. Citizenship Experience with NIST SP 800-171 A combination of certifications to indicate proficiency with Microsoft solutions, networks, and IT security (cybersecurity) Must enjoy user interaction and be able to build rapport with end users May occasionally lift and carry boxes of supplies and/or equipment weighing up to 35-45 lbs. and carry to other locations within the office. Preferred Qualifications: Experience with NIST SP 800-171 CompTIA A+ certification or equivalent MCSE or MTA certifications Azure Administrator Associate Azure Security Engineer Associate Security Clearance preferred At Sciolex Corporation, our top priorities and most valuable resources are our employees, which is why we offer a competitive total compensation package. We are a proud Equal Opportunity Employer (EOE) who celebrates diversity in and out of our organization. Come see where your opportunities for success can flourish. NOTICE: Sciolex Corporation NEVER asks job applicants to issue any payment, service fees, or banking information to Sciolex Corporation or its recruiters as part of our application process. Before providing any personal information to outside parties, verify that the job you are applying for appears on our Careers site.

Our Company Changing the world through digital experiences is what Adobe's all about. We give everyone-from emerging artists to global brands-everything they need to design and deliver exceptional digital experiences! We're passionate about empowering people to create beautiful and powerful images, videos, and apps, and transform how companies interact with customers across every screen. We're on a mission to hire the very best and are committed to creating exceptional employee experiences where everyone is respected and has access to equal opportunity. We realize that new ideas can come from everywhere in the organization, and we know the next big idea could be yours! The Opportunity Adobe Researchers are developing the next generation of advanced technologies and user experiences, inventing a future where Adobe enables new forms of creativity, frees people from routine tasks, and allows enterprises to understand and act quickly on customer and business insights. Our research labs are actively published in leading journals and conferences, work with product teams on high profile features, and explore new product opportunities across various domains. We are especially interested in fostering ongoing collaborations that last beyond the internship and become part of your PhD thesis. Adobe Research focuses on the following research areas: * Content Intelligence * AI & Machine Learning * Computer Graphics (2D&3D) * Data Intelligence * Computer Vision, Imaging & Video * Audio * Systems and Languages * Natural Language Processing * Human Computer Interaction * AR, VR & 360 Photography * Document Intelligence * Intelligent Agents & Assistants What you will do Under the direction of an Adobe Research mentor, you will: * Pursue a research problem to apply to Adobe's products and with the possibility of academic publication * Develop new algorithms, run experiments, and produce demonstration prototypes * Document and present your work, both verbally and in writing What you will need * Current PhD or master's student in computer science, or related field (exceptional undergraduates will also be considered) * Sufficient research skills and background in your chosen subject area * Strong communication skills and teamwork experience * Passion for solving real-world problems with web-scale data using and inventing innovative Machine Learning algorithms. Our compensation reflects the cost of labor across several U.S. geographic markets, and we pay differently based on those defined markets. The U.S. pay range for this position is $45.00 -- $61.00 hourly. Your recruiter can share more about the specific pay rate for your job location during the hiring process. State-Specific Notices: California: Fair Chance Ordinances Adobe will consider qualified applicants with arrest or conviction records for employment in accordance with state and local laws and "fair chance" ordinances. Colorado: Application Window Notice There is no deadline to apply to this job posting because Adobe accepts applications for this role on an ongoing basis. The posting will remain open based on hiring needs and position availability. Massachusetts: Massachusetts Legal Notice It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Adobe is proud to be an Equal Employment Opportunity employer. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Learn more. Adobe aims to make Adobe.com accessible to any and all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, email accommodations@adobe.com or call **************.

ReqID: WAS00007H **See it differently** You see the world through a unique lens and that's exactly what we need. We embrace how you see things differently - it's essential for creating a sustainable future. Arup is a global consultancy with advisory and technical expertise across more than 150 disciplines. We guide, plan and design the future of the built environment. Globally, each year we recruit hundreds of interns to help us see things differently and solve the most complex challenges facing our clients, climate and communities. **The Opportunity** + Design of Plumbing and Fire Protection systems within the built environment, with an emphasis on sustainable design + Support designing plumbing systems such as domestic water, sanitary/vent, and storm systems + Support designing fire protection systems fire sprinkler and standpipe systems + Collaborate with clients, architects, engineers, and consultants to develop integrated solutions for complex buildings + Undertaking and documenting engineering analysis work, including code research, load calculations, and equipment sizing, in a clear manner + Document system design in Revit MEP + Communicate technical ideas to a broad range of audiences using various formats, including presentations and workshops + Write reports documenting calculation methods and results, design assumptions, and other technical information + The ability to prioritize effectively, balance assigned work and exceptional organization skills required for our changing environment + Influence with design on sustainable outcome for our clients to align with Arup sustainability commitment + Assisting in construction administration activities such as site visits and submittal reviews **Is this role right for you?** **Required** + Pursuing a Bachelor's Degree in mechanical, architectural, civil, or environmental engineering + Coursework in fluid hydraulics/piping/fluid dynamics + Shown interest in the built environment and sustainable development + Ability to collaborate with clients + Good time management habits, ability to multi-task, ability to sustain focus on long tasks + Ability to communicate thoughts and technical ideas in an accessible way + Attitude of taking initiative, enthusiasm, eagerness to learn, teamwork, creativity + Ability to prioritize effectively, balance assigned work and exceptional organization skills required for our changing environment + Strong interpersonal and communication skills needed for team-based working + Presentation skills with colleagues and clients of all levels + Must be eligible to work in the United States without the need for employer sponsored work authorization now or in the future. **Preferred** + EIT/ FE certification + Membership in ASPE, ASSE, ASHRAE, NFPA, or SFPE + Courses in sustainability or USGBC participation + Revit or 3D modeling experience + Internship experience in engineering-related firm or evidence of extracurricular activity in the field + Shown ability to perform in a paid work environment with intermittent supervision + Past history of technical presentations and technical writing + Computer programming languages (e.g., Dynamo, Python, Grasshopper) We're looking for: + Changemakers: A passion for sustainable development and creating a better world is key. + Innovative minds: We're looking for critical thinkers who embrace new ideas and challenge the status quo. + Growth seekers: You have a growth mindset, always eager to learn and explore new ways of working. + Adaptable adventurers: You're ready to take on any challenge that comes your way. **What we offer you** At Arup, we care about each member's success, so we can grow together. Our intern experience offers you: + Purpose-driven work: Join an employee-owned team tackling climate, biodiversity, and social challenges, aligned with the UN's Sustainable Development Goals. + Create remarkable outcomes: We trust you to explore challenges, drive change, and create lasting outcomes for our clients, climate and communities. + Inclusive culture: Your unique perspective matters. We celebrate diversity and foster a supportive, social environment where everyone belongs. + Career growth: Grow your skills through innovative projects, training, and mentoring in a supportive environment. We invest in your future. + Work-life balance: Our hybrid model offers flexibility to balance work with your life. We balance your needs with our clients and communities **Washington DC Hiring Range -** The good faith base salary hiring range for this job if performed in Washington DC is $24.00 to $43.50 per hour. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Washington DC will differ. **Next Steps** We will be reviewing our candidates for this position on a rolling basis. Once you've submitted your application, we'll invite you to showcase your skills through a pre-recorded video interview if you've met the minimum requirements. After reviewing your submission, a member of our team will get in touch with you to discuss the next steps. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. **Different people, shared values** Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at. \#goarup \#LI-DF1 EOE-Protected Veterans/Disability

We are seeking a detail-oriented and skilled Manufacturing Engineering Technician II with 2+ years of electromechanical experience to join our team. This role involves performing mechanical, optical, and electrical inspections, along with testing and troubleshooting incoming instruments, parts, and components. The ideal candidate will have a strong background in electromechanical systems, exceptional problem-solving abilities, and a commitment to ensuring the highest quality standards. Hours: Monday-Friday 7am-4:30pmResponsibilities: Perform detailed mechanical, optical, and electrical inspections of incoming instruments, parts, and components to ensure compliance with specifications and quality standards. Conduct functional testing and verification of assemblies, subassemblies, and components. Troubleshoot and diagnose mechanical, optical, and electrical issues using appropriate tools and methodologies. Collaborate with engineering, quality, and production teams to resolve non-conformances and implement corrective actions. Maintain accurate inspection and test records, documenting findings and actions taken. Assist in the development and refinement of inspection and testing procedures. Support process improvements to enhance quality, efficiency, and reliability. Ensure compliance with all safety, regulatory, and company policies. $60,000 - $70,000 a year

Thorlabs is recruiting for Summer 2026 interns, which will have the opportunity to learn more about our business, work on real world projects, and interact within a global company. We are planning to have several interns, this position is for an engineering-based internship with our Imaging Systems group located in Sterling, VA. Housing and relocation expenses are at the responsibility of the applicant and will not be covered by the company. This position requires full-time availability from mid-May to August and offers an opportunity to gain valuable skills and industry insights over the summer. Application deadline: December 19th or until positions filled Salary range $18.00 - $25.00 per hour depending upon the degree and level Purpose of the Position This opportunity is to join a rapidly growing, well-known company in an exciting industry. The ideal candidate will be an entrepreneurial, self-motivated individual who thrives in a fast-paced, creative environment. This position is for an entry to mid-level individual who has a mechanical and/or optical design background. Interested individuals will have a technical background and hands-on experience in such fields as fiber optics, mechanical design, laser optics, polarization and telecommunications. Other positions may include an entry to mid-level position for software development and/or software testing. This individual will have the technical background and hands on experience in such fields as Bio-Engineering, Computer Science or Electrical Engineering. Essential Job Functions include the following, but are not limited to: * Work under the direction of a mentor to learn job skills and manage projects * Complete projects in such areas as Research & Development, Product Development, Software Development and Process Improvement * Create presentations summarizing work completed and present to a panel of technical staff * Learn technical skills and software programs in the field of Photonics * Hands on experience with Manufacturing or Software Development processes * Must maintain a safe and clean working environment through compliance with procedures, policies, and regulations. In addition to the essential functions and duties listed above, all positions are also responsible for: * Meeting company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work-related tasks in a manner that is in compliance with all Company policies and procedures. * Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments. Requirements: * Course work in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Robotics, BioEngineering, Computer Engineering, Software Programming (C++, C#, Python, MatLab), Engineering, Optical Science, Physics, Material Sciences, Chemistry etc. * Technical knowledge in Solidworks, Powerpoint, Excel, Python and Software Development Environment. * Hands-on lab experience (chemistry and/or optical preferred) * Hands-on lab experience (Microscopes and other Lab equipment preferred) Physical Activities: Work may be active, could stand or sit for long durations and/or perform repetitious work at times. The employee may lift or move objects up to 20 pounds. Employees must grasp, manipulate, or assemble parts and components that are often very small. The noise level in the work environment is usually moderate, however, may be noisy at times. Must be able to wear appropriate clothing and personal protective equipment such as but not limited to masks, glasses, gloves, and specialty garments. The required PPE and training allow for the safe handling and processing of chemicals like adhesives, lubricants and solvents, and safe operation of job-related equipment and tools. Thorlabs values its diverse environment and is proud to be an Equal Employment Opportunity/Affirmative Action Employer. All qualified individuals will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age or veteran status. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law. Internship positions will not be eligible for benefits.

Intern / Co-op: Test/Integration Engineer - Hardware/Software Job Summary/Description Acquired Data Solutions is seeking an engineering intern with automated programming experience. Candidates must be familiar with test and measure instruments used in laboratories and manufacturing test environments. Programming experience in LabVIEW and/or Python are highly desirable. Multiple positions are available in the summer and fall semesters. Minimum Qualifications ● Enrollment in, or recent graduate of, accredited degree program in Science, Technology, Engineering, or Math (STEM) Desired Skills and Experience Familiarity with operation and automation/programming of Lab and Manufacturing Test & Measurement equipment such as: Digital Oscilloscope Analog and Digital I/O (input/output) RF Instrumentation (Power Meter, Spectrum Analyzer, Vector Signal Transceiver) Signal generator Programming experience: National Instruments LabVIEW and/or TestStand Python C, C# Familiarity with RF (radio frequency) concepts is desired U.S. Citizenship and ability to access US only data systems Candidates must meet one of the following requirements: Current college student, with a cumulative GPA of 3.00 or above, who is attending a Maryland or higher education institution. Current college student, with a cumulative GPA of 3.00 or above, who is Maryland high school graduate attending a higher education institution outside of Maryland. Graduate (within 12 months) of a Maryland higher education institution. Maryland resident, with a 2 or 4-year degree, who has been honorably discharged from the U.S. Armed Forces, The National Guard or a Reserve component of the Armed Forces within the last 18 months. Questions: 1. Please describe your favorite LabVIEW project that you've been a part of, and your role in it 2. Please discuss any experience you have using National Instruments hardware combined with LabVIEW, LabVIEW Real-Time, and LabVIEW FPGA 3. Do you have experience with object-oriented programming and the actor framework?

Responsibilities What you can expect: Meaningful, fast-paced work with the region's largest heavy civil construction and materials company On-the-job training led by talented, passionate members of the Allan Myers team Exposure to a large heavy civil construction project Buddy assignment Social networking events Classroom training to develop professional skills Each assignment is typically 3-6 months Typical Duties Students will support a crew, project or plant team in the planning, scheduling and execution of a heavy civil construction project. Typical duties are as follows: Coordinating subcontractors Project Schedule Management Project plans exposure Preparing work plans Contract Management Daily reporting Ordering materials Change orders Qualifications High school diploma or equivalency (GED) required Pursuing a Bachelor's degree in one of the following areas: Civil Engineering, Construction Management, Mining & Materials Engineering, Business Management, or another engineering related degree Must be a team player and possess a collaborative attitude Excellent communication skills both verbal and written Strong analytical and communication skills Willingness to learn and adapt to change Overview cursor Our Company Does Work That Matters Allan Myers is the largest heavy civil construction and materials production contractor in the mid-Atlantic. We build infrastructure: the highways and bridges that connect cities and towns, the public water and wastewater systems that provide clean water to your home and keep our streams clean. We take pride in meeting the highest quality standards because it ensures our work will have a long-lasting positive impact on the community. When you get home safe each night, you know that what you did that day matters. At Allan Myers, you are part of a team dedicated to making things better, including your career. We pay well and provide generous benefits. We offer extensive training and promote from within. If you have the drive, we will help you build a career in the thriving construction industry and reach your full potential. Allan Myers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status or other characteristics protected by law.

Perform special duties as assigned. As a student, engage and participate in planned and education-related work experiences that integrate the knowledge and theory gained in the academic setting with practical application and skill development in the workplace. How you will contribute: Communication: Communicate with VDOT staff as well as external contacts and consultants. Proactively resolve issues at the lowest level. Project a positive VDOT image. Keep supervisor advised of important development and field observations. Engineering Technology: Apply principles and practices of engineering technology to assigned programs areas. Interpret policies and procedures and apply in daily work assignments. Equipment Maintenance: Perform routine maintenance and repairs on testing equipment. Follow appropriate guidelines for equipment storage, use, and transport. Perform Duties as Assigned: Project Documentation: Prepare and maintain daily documentation of project activities. Ensure documentation is submitted and is completed. Avoid project delays and solve project related matters. Record Keeping : Maintains accurate records for all project activities. Enters and updates data to meet required deadlines and requirements. Interprets and applies relevant policies and procedures. What will make you successful: Ability to communicate effectively orally and in writing. Ability to perform manual labor (securing, handling, and preparing materials samples). Ability to read and interpret engineering plans and specifications. Knowledge of mathematics up to and including algebra and geometry. Skill in the use of computers, software applications to include MS Office, and smart phones. Minimum Qualifications: Be at least a rising sophomore (2nd year), enrolled in undergraduate study in a two-year or four-year college/university. Complete a minimum of 12 credit hours per semester for undergraduate students and 9 credit hours per semester for graduate students. Students must be enrolled full-time at the time of application. Graduate students are eligible to apply. Have a basic knowledge of engineering principles. Must be at least 18 years of age by the start of employment. Second year or transferring Community College students may apply. Additional Considerations: A combination of training, experience, or education in Engineering, or related field desired. Ability to anticipate problems, provide solutions, follow instructions, learn quickly, and collaborate with teammates. Ability to make quality and timely decisions. Ability to work independently and in teams. Click below to learn more about the Competency Model associated with this Position: Competency Model Physical Requirements Physical Requirements VDOT employees must abide by VDOTs Code of Ethics and the Commonwealths Standards of Conduct. VDOT Code of Ethics Standards of Conduct Physical Requirements Physical Requirements

Job Description Engineering Intern - Summer 2026 Trans-Tech is the leading designer and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors to applications across several industries, including 5G Wireless Communications, Aerospace, Military & Defense, Medical, Battery Technology, SOFCs and other Advanced Technologies. We are seeking a summer intern Engineering Student to join our Process Engineering and/or R&D team to support on-going development and manufacture of Advanced Technical Ceramic products. Job Responsibilities: Assists Manufacturing, Process Engineering, and/or R&D Departments by performing various Engineering related tasks, such as collecting and compiling process data, measurement analysis and monitoring of core Ceramic Material processes in support of the development, manufacture, fabrication, and evaluation of ferrimagnetic, and dielectric based ceramic materials technical ceramic powders and products. Under the guidance and supervision of various Staff Engineers, the Engineering Intern will interact with Engineering and Manufacturing personnel to conduct reviews of material requirements and compatibility of processing methods. The Engineering Intern will compile and evaluate test data to determine appropriate limits and variables for a specific process or material specifications. The Engineering Intern will be encouraged to conceive, plan and carry out experiments and associated activities requiring Engineering concepts to define and select methods that may involve the development of new or improved processes for solid oxide powder formulation & synthesis, powder & slurry processing, forming and pressing, ceramic sintering and post firing evaluation of ceramic material properties and associated electrical characteristics. Depending on the specific assignment, the Engineering Intern must be able to work in a Manufacturing area or a Laboratory environment, attend and participate in Engineering or Project meetings and be prepared to present data or discuss results as necessary and provide formal status updates to assigned Supervisors or Engineering Mentors. Job Requirements: Currently enrolled in a BA/BS/MS program studying Ceramics Engineering, Materials Science, Materials Engineering, Mechanical Engineering, Chemical Engineering, Industrial/Manufacturing Engineering, or RF/Electrical Engineering Completed coursework or experience with Analytical /DOE Software such as JMP or Mini-Tab Completed coursework and/or exposure to Solidworks or Materials Analysis Interest in working in a Ceramic Manufacturing environment and the desire to understand the basics of Ceramic Material processing Self-starter with ability to effectively work independently or as a member of a team Potential interaction with local universities including travel to campuses to perform advanced analytical testing and measurement correlations Proficient in the use of MS Office software suite (Excel, Outlook, PowerPoint, Word) Demonstrate good communication, organizational and documentation skills This position does not include compensation for relocation expenses or housing allowances. Preference will be given to students completing their junior year. Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.

Trans-Tech is the leading designer and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors to applications across several industries, including 5G Wireless Communications, Aerospace, Military & Defense, Medical, Battery Technology, SOFCs and other Advanced Technologies. We are seeking a summer intern Engineering Student to join our Process Engineering and/or R&D team to support on-going development and manufacture of Advanced Technical Ceramic products. Job Responsibilities: Assists Manufacturing, Process Engineering, and/or R&D Departments by performing various Engineering related tasks, such as collecting and compiling process data, measurement analysis and monitoring of core Ceramic Material processes in support of the development, manufacture, fabrication, and evaluation of ferrimagnetic, and dielectric based ceramic materials technical ceramic powders and products. Under the guidance and supervision of various Staff Engineers, the Engineering Intern will interact with Engineering and Manufacturing personnel to conduct reviews of material requirements and compatibility of processing methods. The Engineering Intern will compile and evaluate test data to determine appropriate limits and variables for a specific process or material specifications. The Engineering Intern will be encouraged to conceive, plan and carry out experiments and associated activities requiring Engineering concepts to define and select methods that may involve the development of new or improved processes for solid oxide powder formulation & synthesis, powder & slurry processing, forming and pressing, ceramic sintering and post firing evaluation of ceramic material properties and associated electrical characteristics. Depending on the specific assignment, the Engineering Intern must be able to work in a Manufacturing area or a Laboratory environment, attend and participate in Engineering or Project meetings and be prepared to present data or discuss results as necessary and provide formal status updates to assigned Supervisors or Engineering Mentors. Job Requirements: Currently enrolled in a BA/BS/MS program studying Ceramics Engineering, Materials Science, Materials Engineering, Mechanical Engineering, Chemical Engineering, Industrial/Manufacturing Engineering, or RF/Electrical Engineering Completed coursework or experience with Analytical /DOE Software such as JMP or Mini-Tab Completed coursework and/or exposure to Solidworks or Materials Analysis Interest in working in a Ceramic Manufacturing environment and the desire to understand the basics of Ceramic Material processing Self-starter with ability to effectively work independently or as a member of a team Potential interaction with local universities including travel to campuses to perform advanced analytical testing and measurement correlations Proficient in the use of MS Office software suite (Excel, Outlook, PowerPoint, Word) Demonstrate good communication, organizational and documentation skills This position does not include compensation for relocation expenses or housing allowances. Preference will be given to students completing their junior year. Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.