Engineering associate jobs in Champaign, IL - 190 jobs

Expertise in Pinpoint MES for 3+ years and MES 10+ years Has knowledge in Automotive domain Assist in providing assembly planning support for Building Construction product/ Earth moving equipment. Experience with setting up Assembly Value streams in Pinpoint with Section/ station/ Zone and Assembly operations. Set up Pinpoint with Assembly line Torque tools, fixtures, and other in-process validation (IPV) checks. Integrate Torque tool, sockets and other Quality inspection devices with Pinpoint to improve preventive control and, interlock mechanisms in the assembly process. Integrate Andon process with pinpoint application and exposure with production tracking dashboard to develop station/ Zone wise metrics in terms of Cycle time, Material downtime, tool/ fixture downtime etc. Experience with Manufacturing Execution system for Assembly (MESA). Update standard work and visual work instructions as needed, following established standards and guidelines Carry out continuous improvement projects to assist with better through put and quality for product lines being manufactured including Value Stream Mapping (VSM) Responsible for supporting the manufacturing operation by providing tooling, processes, equipment, etc. to provide for the needs of the shop operations. Establishes standards and works with shop personnel to resolve problems related to process, tooling, equipment, etc. The expected salary range for this position is between $74,500 to $80,500 annually. The actual salary may vary based upon several factors including, but not limited to, relevant skills/experience, time in role, base salary of internal peers, prior performance, business line, and geographic/office location.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary Internship Term: Summer 2026 This is a general application, and is not an official opening. Your application can be considered for Rivian's 2026 internship programs. If you are selected, you will receive an invitation to interview for an open position. Rivian internships are experiences optimized for student candidates. To be eligible, you must be an undergraduate or graduate student in an accredited program during the internship term with an expected graduation date between December 2026 and 2028. Rivian's Internship Program requires active student enrollment. Information regarding your expected degree completion date is collected solely to verify eligibility and determine your availability for future full-time opportunities. Rivian is an equal opportunity employer and does not use graduation dates to determine the age of applicants or as a basis for discriminatory hiring decisions. If you are not pursuing a degree, please see our full time positions on our Rivian careers site. Note that if your university has specific requirements for internship programs, it is your responsibility to fulfill those requirements. Responsibilities Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes Qualifications Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Pay Disclosure Salary Range/Hourly Rate for Internships: The range of pay for internships is 25.00-51.00 per hour. Actual compensation will be determined based on location, and other factors permitted by law. Rivian provides robust wellness benefits, and a medical insurance package for interns, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Must be currently pursuing a bachelors, masters, or PhD degree at an accredited university Actively pursuing a degree or one closely related in Mechanical Engineering Experience with CAD software Applied knowledge and understanding of engineering first principles Must have excellent written and verbal communication skills Ability to navigate ambiguity in a fast-paced environment Capable of working as a member of a team across several cross functional disciplines, including with external stakeholders Applying to this opening will place you into consideration of Rivian's 2026 internship programs. Teams your application can be considered for include: Advanced Energy Solutions Battery Engineering Chassis Manufacturing Prototypes & Special Projects Quality Reliability Safety Technical Program Management Test & Development Vehicle Attributes

APTech has immediate openings for hard-working, well-organized engineers to work on a variety of airport and roadway projects. These full-time positions will be located either in APTech's corporate office in Champaign, Illinois, or our Waunakee, Wisconsin (Madison area) office. These will require occasional multi-day travel. The successful applicant will work on a variety of projects across the United States involving the evaluation, design, and management of pavement systems. Additional opportunities on projects involving pavement research and training are also available. Requirements Responsibilities: The successful applicant will have a BS or MS in Civil Engineering or Transportation Planning. Interest in pavement management, evaluation, and design. Interest in asset management or performance-based planning, with preference given to candidates with previous data modeling experience. Proficiency with Microsoft Office programs (such as Word, Excel, PowerPoint and Access), experience with Structured Query Language (SQL), and good overall computer hardware and software skills. Excellent written and oral communication skills. Flexibility to travel, work weekends, and overtime as necessary. Familiarity with Pavement Condition Inspection (PCI) surveys, pavement condition assessments, and experience with PAVER or other pavement related software is preferred but not required. Experience with Geographic Information Systems (GIS) is a plus. Requirements: Preference will be given : Advanced degree in civil engineering, with a concentration in transportation materials. Knowledge of pavement materials and pavement design and construction practices. Benefits and wellbeing: APTech offers highly competitive compensation and benefits packages aimed to meet the needs of all employees and their families. We believe in a work life balance that allows our members to achieve their long-term personal and professional goals. APTech supports this balance by providing the following: Paid Time Off Paid Holidays Flexible Work Schedules Equity Participation Plan (Annual Bonus) 401(k) “Safe Harbor” plan Personal and Professional Development Cell phone reimbursement Home internet reimbursement Medical, Dental, and Vision Insurance Flexible Spending Accounts (Medical and Dependent Care) Total Pet Plan - pet care discount program Accident Insurance Short-Term and Long-Term Disability Insurance Life Insurance/Accidental Death and Dismemberment Annual Technology Stipend Service Appreciation Awards Compensation: Starting salary $68,000 - $75,000 based on experience, education, and location How to Apply: Visit our Careers Page at *************************************** and select “Engineering Associate.” About Us: We are a full-service pavement engineering consulting firm that provides effective solutions for the design, evaluation, maintenance, and rehabilitation of roadway and airport pavements. Since our founding in 1994, we have worked with clients at the state, federal, and local levels in the United States and abroad, and we are a recognized leader in our industry. We help our clients identify cost-effective strategies that reduce the overall life-cycle cost of preserving the pavement network while incorporating the latest pavement-related designs and technologies into organizational practice. APTech is an equal opportunity employer and values diversity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Responsibilities * Participate in hardware development activities * Assist Mechanical Engineers with projects and prototyping as needed * Help with testing and evaluation of new and existing products * Collaborate closely with R&D team members Qualifications/Skills: * Experience with CAD software, preferably Autodesk products (Inventor) * Experience with Microsoft software, Outlook, Word, Excel and Sharepoint * Ability to work independently * Excellent written and communication skills * Must be at least 18 years of age by the start of semester * Able to work up to 40 hours per week during summer session Education and Licensing * Student enrolled in Engineering/Technology: Mechanical Engineering Electrical Engineering, Industrial Engineering, Manufacturing Engineering, ME, MET, EE, EET preferred * Must have been enrolled full-time for the current semester, new graduates are still eligible for this position Benefits * Medical * Dental * Vision * Company Paid Life/ADD * Voluntary Life/ADD * Dependent Life/ADD * 401k with Employer Match * Vacation * Personal Time * Watchfire is an Equal Opportunity Employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. * Legal authorization to work in the US required. We will not consider candidates who need sponsorship, now or in the future, to be legally employed in the US. No H1B, OPT, CPT or other "temporary work authorization" candidates will be considered.

**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **About the Role** Caterpillar's Manufacturing, Supply Chain, and Order-to-Delivery (MSOD) Intern program seeks students currently enrolled in a four-year university to work alongside manufacturing professionals to learn and apply themselves to project work within their teams. Interns will have assignments that provide them with experience and significant learning opportunities. In addition to this work, Interns can network with management throughout the company to learn about Caterpillar areas outside their assigned team. Students can deepen their business skills in their assignments through team and business partner interactions, develop their skills, conduct presentations, and measure their success through the performance and evaluation process. **What You Will Do** You'll join a team with diverse project responsibilities and have valuable networking opportunities with all levels of Caterpillar employees. The internship is a 40-hour-per-week assignment lasting 12 weeks. You'll join a team with diverse project responsibilities and have experiences including (but not limited to): + **Manufacturing** **Engineering ** : Responsible and accountable for enhancements and modifications to equipment and processes in our facilities, monitoring equipment and process reliability, identifying and addressing problem areas and providing engineering support on equipment, processes, or facilities + **Quality** : Analyzing non-conformance data and maintaining quality system documentation. Participating in and offering technical support to internal and external audits; following up response of corrective action from audit. Interacting with manufacturing team members to determinethe root cause of quality issues and ensure that corrective and preventive action is implemented. + **Automation:** Collecting and researching data on customer experience with robotic platforms. Documenting architecture specifications, software design description, verification plans, test cases, operating procedures, and safety procedures. Utilizing appropriate tools to debug, test and maintain software and hardware systems of robotic tools; assisting in the verification and validation process. Participating in design and development of application software and algorithms for robotic platforms. **What You Have - Skills and Experiences** In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills. + Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities + Organize and manage multiple projects simultaneously, ability to quickly gain and effectively apply new skills & knowledge + Success in collaborating with others of diverse cultures, interpersonal styles, and abilities + Strong written and verbal communication skills + Participate in and build on our inclusive, constructive, and productive work environment + Ensure all team members' contributions are recognized and valued **Internship Program Qualifications:** + Must be enrolled full-time in a 4-year university/college in one of the following degree programs: Engineering, Engineering Management/Technology, Industrial Distribution/Technology, Automation Engineering Technology, Mechatronics, Robotics, Mechanical Engineering, Electrical Engineering, or other relevant degreesat the time of application and throughout the program. + Must have 30 completed semester hours before the start of the internship. + If a transfer student must have 12 semester hours completed at a 4-year university. + Minimum 2.8/4.0 Cumulative Grade Point Average (no rounding) at current institution. + Must be able to relocate to indicated work location for the duration of the internship and complete daily work commute using reliable transportation. **Top candidates can also have:** + Project or Team Leadership experience + Previous internship, co-op, or research/relevant experience + Excellent interpersonal and communication skills **Additional Information:** + Please attach your resume and an unofficial copy of your transcript to your application. + Applicants will be considered for positions throughout the United States. + Sponsorship is **NOT** available for this position. + Relocation is available to those that qualify + This position requires working onsite five days a week. Besides exciting work, Corporate Interns will experience: + Comprehensive internship orientation + Tours of state-of-the-art manufacturing and research facilities + Product Demonstration + Mentorship Programs + Various social events + Networking with leadership + Business skill building + Career discussion with leaders and experts **Final details:** Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in on our career website as it will reflect any updates to your status. Qualified applicants of any age are encouraged to apply. For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at *************************** . **Summary Pay Range:** $25.00 - $43.00 **Intern Hour Rate:** An intern's hourly rate is based on the major/degree being pursued and the number of completed academic hours achieved before the start of the internship. **Intern Benefits:** The total rewards package, beyond base salary, may include if eligible: + Accrued Paid Time Off (PTO) + Paid Holidays + Paid Volunteer Day + Housing Stipend + Relocation Assistance + Medical coverage + Voluntary benefits Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at ***************************. **Posting Dates:** December 2, 2025 - March 30, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .

Provide exceptional service to customers by performing maintenance, diagnosis, and repairs to Electric Power Generation and Industrial equipment. This includes paralleling switchgear and electrical controls. Inspect and recommend service repair options. Communicate between customer and field dispatch. Other duties as assigned Qualifications Ability to read electrical schematics, knowledge of proper electrical troubleshooting, and engine experience required. Must be a self-starter with good time management, planning, organization, and commitment to detail. Knowledge of Electric Power Generation equipment, engines, accessories, switchgear, and controls preferred but not required. Computer literacy including Word, Excel and Outlook. Excellent communication skills (written, e-mail, and verbal). Must be able to lift 75lbs. Must be flexible to work varying schedules and hours. Minimum high school diploma or equivalent required. Must have a minimum of a D2 Chauffer's license or a CDL and clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle will be performed on final candidate). Altorfer Inc. offers an industry leading compensation and benefit package: Health, Dental, Vision, Disability, and Life Insurance 401(k) and Additional 401(k) Contribution Paid Holidays Paid Parental Leave and Funeral Leave Vacation: 40 hours of vacation after 1 year of full-time employment Sick: 40 hours of sick after 1 year of full-time employment Education Assistance Personal Tool Insurance, and Safety Equipment Reimbursement Voluntary Benefits: Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection Payrate: $26.09 - $41.98 per hour Posted Min USD $26.09/Hr. Posted Max USD $41.98/Hr. Physical Requirements/Working Conditions This position works in a field/shop environment primarily at Customer jobsites. May on a continuous basis walk, bend and lift up to 75 lbs. Will be required to wear appropriate safety equipment (IE- Safety glasses or side shields, hearing protection, etc.) for a given situation. The noise level in the work environment is usually moderate to high. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran . Why Work for Altorfer? At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the “A-Team” and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

We are designing the Grid of the future! We are innovators by nature, for over 50 years, Electric Power Engineers, LLC (EPE) has partnered with power and energy clients across the globe to focus on complex engineering and grid modeling challenges. As an early leader in the renewables space, we continue to see significant opportunities to build a sustainable and secure Grid. Join a team committed to making an impact on the communities we serve and the environment in which we live. Together we can continue to create the “grid of the future”! Responsibilities Join us in leading the change! Electric Power Engineers, Inc. (EPE) works with clients on a global scale designing solutions for renewable energy (solar/wind/battery storage), Generation Interconnection, Transmission Planning, Distribution Planning, Distributed Energy Resources (DER), and Smart Grids. Internships at Electric Power Engineers, Inc. are more than just a job, they're an experience! Our interns bridge theoretical classroom concepts and hands-on training to overcome real-world challenges. Throughout your internship, you will develop skills to advance professionally and academically. How you can make an impact: The Power Systems Engineer Intern - will perform projects/tasks such as network-wide steady-state and short-circuit studies as well as contribute to process improvement efforts, including development of Python scripts. This position will report to an experienced distribution engineer and be exposed to exciting projects building valuable industry knowledge. Through this opportunity, the intern will gain hands-on experience and perform research in-line with study requirements. Qualifications Bring your passion, here what's needed: Completion of, or current enrollment in, a bachelor's, master's, or PhD degree program with a major in Electrical Engineering, Electrical and Computer Engineering, or Electrical Engineering Technology from an accredited college or university. Completion of, or current enrollment in, power systems fundamentals class(es) (strongly preferred) Minimum GPA of 3.0 or higher Location : This position will be in persion and can located at one of these location: Champaign, IL, Austin, TX, Panama City, Panama, or Waterloo, Canada Travel : None EPE is an equal opportunity/AA/Disability/Veteran employer. The EEO is the Law poster, and its supplement are available using the following links: EEOC is the Law Poster If you are interested in applying for employment with EPE and need special assistance to apply for a posted position, please send an email to: applicationassistance@epeconsulting.com Third-Party Recruiting Notification EPE does not accept unsolicited resumes from third-party recruiters. Any unsolicited third-party resumes forwarded by recruiters to EPE via our career page or to any of our managers or employees will be considered public information, may be treated as a direct application from the person identified in the resume, and will not be eligible for placement fee payment to the agency. EPE will not pay a fee to a third-party recruiter or agency without a previously signed third-party agreement and has not coordinated their recruiting activity with the appropriate member of the Talent Acquisition team.

Our award-winning client is looking to identify talented individuals for an Entry-Level Engineer for a leading manufacturer of products that serve a variety of industries including defense and aerospace. They are looking for a Mechanical or Aerospace Engineer with internship or project experience in design. Required Qualifications: A BS Degree in Mechanical or Aerospace Engineering. Intern or Project Engineering experience in Design - aerospace parts, automotive, or similar. Desire to learn and be mentored. Excellent communication skills with the ability to work and interact in a Team Setting. Connections to east central Illinois or a desire to live in the area.

Illinois Ameren Illinois provides electric transmission and distribution service and natural gas distribution service. Every day, we deliver electricity to 1.2 million electric and 816,000 natural gas customers in central and southern Illinois. We deliver safe, reliable energy to more than 1,200 communities. Our benefits include: Medical coverage on date of hire 100% employer paid cash balance pension plan 401(k) with company match fully vested on date of hire Minimum of 15 days paid vacation and 12 paid holidays Paid parental leave and family caregiver leave Visit our Benefits and Perks Page for more information on benefits provided to regular full-time employees. About The Position The Engineering Support Specialist is responsible for completing and supporting a variety of tasks within design and maintenance engineering. The position is intended to provide non-design functions and support activities within a full-service engineering organization. These department functions include but are not limited to safety, staffing, recruiting/on-boarding, training/development, performance monitoring, research/technical writing, and process improvement. Key responsibilities include: -Department safety program activities, including safety meetings and safety training. -Department goals, objectives, plans, and performance metrics. -Department training plan, including new employee orientation, initial training, coordinating attendance at periodic required training, and continuous technical and developmental training activities. -Department engineering assurance plan and corrective action tracking. -Department policies, processes, procedures, and instructions. -Software, upgrades, licensing, computer, and equipment maintenance needs. -Department O&M budget, data requests, audit support, and other administrative duties. -Ordering and expediting materials for engineers. -Preparing contracts for vendors who supply engineering services. -Other support activities as directed by supervision. Qualifications High School Diploma or equivalent required. Three or more years of relevant experience (e.g., computer systems, electrical, industrial experience) required. A Bachelor's degree in a related field will be considered in lieu of experience. Bachelor's or Associate Degree preferably in a technical area (e.g., electrical/computer or industrial technology) from an accredited college or university preferred. Knowledge of basic project lifecycle processes is preferred. Electric utility experience is preferred. In addition to the above qualifications, the successful candidate will demonstrate: The Engineering Support Specialist works a standard day shift in an office environment. Some travel is required. Proficiency in use of computers is required. Familiarity with MS Office suite (e.g., Excel) software products. Must have good analytical skills. Must also have the capability to work on major project teams. Ability to handle multiple assignments/projects and priorities. Additional Information Ameren's selection process includes a series of interviews and may include candidate testing and/or an individual aptitude or skill-based assessment. Specific details will be provided to qualified candidates. Compensation Range: $50,300.00 - $75,500.00 At Ameren, base salary is one component of a competitive compensation package for employees. Our pay ranges are broad to allow for movement within our organization and to accommodate different skill sets and levels of expertise. We take into consideration a variety of factors including, but not limited to, skills, abilities, experience, education, credentials, and internal equity when determining the base salary offered. Roles are eligible for additional rewards including annual incentive payments based on individual and company performance. If end date is listed, the posting will come down at 12:00 am on that date: Tuesday January 20, 2026 All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, ethnicity, age, disability, genetic information, military service or status, pregnancy, marital status, sexual orientation, gender identity or expression, or any other class, trait, or status protected by law.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit ******************************* Your Impact: The OSP Field Engineer provides training and supportive engineering services through highly detailed collection of telecommunications information from the job site. This position requires a working level of knowledge in all technical aspects of fiber networks. The successful candidate is responsible for in person validation of the existing field design and layout of the telecommunications network to include aerial, buried and underground fiber network design and layout, underground conduit, handhole, building entrance, and riser facilities. May serve as an informal lead to more junior staff from time to time. Core Responsibilities: Identify, photograph, & document detailed information of required facilities, including cables, poles, terminals, pedestals, handholes, & other outside plant infrastructure. Capture accurate measurements of attachment heights, span distances, utility structures, & distances from existing/proposed OSP facilities to centerlines, property lines, and curb lines Identify power and communication facilities and ownership on utility poles. Record bonding, grounding, guying, and anchor information Deliver detailed field notes & photographs to the engineering team Identify relevant obstructions to fiber placement and provide proposed mitigation strategy Understanding of OSP construction techniques Ability to read and understand digital GIS maps, conduit records, and layout drawings Be able to effectively utilize tools, such as measuring wheels, height sticks, pull finder, GPS devices, MH/HH hooks, & laser rangefinder Able to use electronic devices, such as iPad, iPhone, laptop, file sharing, email, etc. Core Experience: 3+ years of experience in the fiber-optic/telecommunications/telecom construction industry High School Diploma or equivalent required Knowledge of outside plant activities (Fiber Cable Design, Pole Line Construction, Conduit System design), and Make-ready issues Knowledge of obtaining right of ways and easements where required, and the ability to make the appropriate notations on the field notes for the desktop teams Ability to read and understand as build prints, and be able to identify conflicts with existing outside plant facilities, select routing of lines and equipment required for projects Familiar with GIS (Geographic Information Systems), ESRI, and shapefile functionality Able to identify different types of utilities, potential conflicts, and violations based on regulatory standards (RUS, NESC, GO95, NEC, etc.) Experienced in the use of Microsoft Office Suite Working knowledge of AutoCAD (a plus) Must have a valid driver's license, reliable transportation with an acceptable driving record, and be able to pass a pre-employment drug screen and background check. Good organizational, written, and verbal communication skills PHYSICAL DEMANDS: Ability to frequently lift and/or move up to 50 pounds Extensive travel and the ability to work on site for numerous projects in various states Ability to work outdoors 95% of the time Ability to travel up to 100% of the time, by air or vehicle and may require overnight stay up to two weeks at a time Ability to travel with short notice Ability to follow OSHA/State/Local Safety Standards Ability to walk up to 3 miles per day on terrain such as gravel, pavement, grass, etc Ability to work in poor weather conditions such as heat, snow, rain, or wind Ability to work safely, with or without supervision At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$24-$29 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at ************************

Engineering Services Utilizing mechanical & plumbing design expertise, this position will be responsible for the design, development, review, and management of mechanically oriented projects for campus buildings. Produce and deliver engineering opinions, designs, technical decisions, recommendations, and documentation to F&S departments, campus, and other University units in conformance with applicable codes and University Facilities Standards. Provide the analysis, and development of mechanical project scopes for campus buildings. Designs and technical opinions are to provide safe, reliable, comfortable, productive, sustainable, and cost-effective facilities to support the Mission of the University. Provide support to other units. Support the Mission, Vision, Values, and Guiding Principles of Facilities and Services. DUTIES & RESPONSIBILITIES: PROJECT PLANNING ASSISTANCE Assist with project planning and program analysis phase for new construction and renovation projects to assist in the development of detailed technical scopes. Provide analysis of existing mechanical systems of campus buildings for condition assessment, operating capacity, functionality, compatibility with associated systems and use of spaces served under the supervision of licensed professional engineer. Establish, update, and meet project schedules. Note significant milestones and deadlines, potential construction conflicts, sequencing and phasing concerns and building/site accessibility. Estimate hours and duration required for tasks of self, technicians, and others involved in development of design, construction administration and project close-out. Manage work assignments, establish project priorities, and resolve design issues. Confer with Management Architects, Management Engineers, and Associate Director regarding resource needs and schedules. Develop weekly forecast of planned work and provide periodic project status reports. Update the design teammates and client routinely and upon changes in scope, schedule, budget, or status. Compare and incorporate results of previous projects and develop schedule and resource allocations required to meet needs of project and client. PROJECT DESIGN & DESIGN REVIEW Provide analysis of existing HVAC, Fire Protection and Plumbing systems of campus buildings for condition assessment, operating capacity, functionality, compatibility with associated systems and use of spaces served. Provide troubleshooting expertise for existing HVAC, fire protection, and plumbing systems that are not functioning properly to identify problems, determine appropriate resolution, and provide recommended corrective work in project program analysis format with clear definition of scope and probable costs. Provide detailed design documents (drawings and specifications) for construction projects for remodeling, renovation, repair, replacement, or new work. This includes all necessary engineering analysis, design and layout of HVAC, fire protection, plumbing systems, development of control sequences, points lists, schematics, and associated building automation control systems integration. Prepare and present reports, programs, displays, or drawings to management or staff as assigned. Provide detailed engineering analysis of Building HVAC Load and System Simulations using Trane Trace700, Carrier HAP, or other suitable software. Provide detailed review of projects designed by outside professional services consultants (PSC's) and in-house designers. Prepare written review comments for items not compliant with code or University Facilities Standards and for items not compatible, coordinated or acceptable for the proposed use. . May participate in formal or informal discussions concerning these comments. Provide assessment / analysis of existing mechanical, plumbing, and fire suppression systems of campus buildings for mechanical/plumbing operations, capacity, functionality, compatibility with associated systems and use of spaces served. Provide assessment of new technologies, equipment, and systems for mechanical & plumbing building elements and associated equipment in order to evaluate applicability and value to campus projects. Upon request, provide technical review & opinion on variance approval request forms submitted on projects. Utilize software and information resources available to the F&S Division. This includes the Microsoft Office (Teams, Word, Excel, Outlook, PowerPoint, etc.), AutoCAD, Bluebeam, AiM, the my.fs.illinois.edu Portal, SharePoint, and internet offerings. CONSTRUCTION & WARRANTY SUPPORT Provide review of HVAC construction submittals and testing verification on in-house designed projects and other projects as requested. Attend construction progress meetings as needed or by request. Provide technical support and on-site inspections as requested for the Commissioning & Inspection Group. Assist Lead Inspector and occupant with technical issues in-house designed projects during the warranty or post construction phase. CONTINUING EDUCATION Provide and/or attend training for professional development, technical topics, and team-building. Provide assessment of new technologies, equipment and systems for related HVAC, Fire Protection and Plumbing equipment to evaluate applicability to our projects and UIUC Facilities Standards. Prepare and present training sessions for staff for various topics as assigned. Maintain knowledge in current building codes, University Facilities Standards, State and Federal regulations, and restoration standards, energy codes needed to adequately meet the needs of the Engineering Services Department. SUPPORT TO OTHER UNITS & CAMPUS COMMITTEE ASSIGNMENTS Provide technical support to F&S Crafts and Trades for equipment selection, troubleshooting of building elements and system problems, development of preventive maintenance needs and answer technical questions. Provide technical support to Commissioning and Inspection group including shop drawing review, contract document interpretations, codes and standards interpretations, testing procedures and start-up. Provide technical engineering consultation to other Facilities & Services units and campus units. Provide Mechanical, Plumbing, and Fire Suppression expertise in support of Capital Programs/Deferred Maintenance, Engineering Services, Construction Services, Utilities and Engineering Services, Building Maintenance & Grounds, and other F&S Departments as well as campus units. Assist Capital Programs Planners and/or Project Managers in the preparation of project descriptions, preliminary budget and applicable scope of professional services required for each project as requested. Evaluate types of Feasibility Studies required to appropriately meet institutional requirements. Participate in the process for the selection of Professional Services Consultants, as assigned. Participate in focus groups, F&S and campus committees, and initiatives as assigned. OTHER DUTIES AS ASSIGNED Establish and maintain effective working relationships with other employees, faculty, staff, administration, professional consultants, and contractors. Provide support in the collaboration, development, and maintenance of the University Facilities Standards. Perform other duties and responsibilities as assigned. Physical Demands Walking : Occasionally Stairs : Occasionally Sitting : Occasionally Additional Physical Demands 1. Support the Mission, Vision, Values, and Guiding Principles of Facilities and Services. 2. Occasional field visits for projects in construction. Minimum Qualifications 1. Bachelor's or advanced degree in Mechanical Engineering or related field from an accredited institution. 2. Licensed Professional Engineer in the State of Illinois. 3. In-depth (five (5) years minimum) progressively responsible administrative experience in engineering design of HVAC. 4. Demonstrated knowledge & experience of building systems, including mechanical, electrical, plumbing, fire protection, and/or building automation and/or control systems. Preferred Qualifications 1. Advanced degree in Mechanical Engineering or related field from an accredited institution. 2. Seven (7) or more years of extensive design experience with large HVAC Central Systems. 3. Four (4) or more years of design experience with Plumbing, and Fire Suppression Systems and building automation systems with increasing responsibility of project development and management. 4. CEM, CEFP, LEED or additional certification in engineering, energy or facility management. 5. Experience using mechanical and plumbing equipment selection software. 6. Experience in Siemens and Schneider Electric I/A Building Automation Control Systems. Knowledge, Skills and Abilities * PREFERRED KNOWLEDGE, SKILLS, AND ABILITIES: * 1. Thorough knowledge of applicable building codes, standards, and regulations, including the International Building Code, International Mechanical Code, International Energy Conservation Code, and other applicable codes and standards. * 2. Thorough knowledge of air-side and complex energy recovery systems. * 3. Thorough knowledge of systems modeling and optimum system selection. * 4. Experience in energy modeling. * 5. Knowledge of laboratory HVAC design. * 6. Knowledge of laboratory gas design, laboratory piping and plumbing design, pneumatics, and fuel gas system design. * 7. Knowledge of applicable higher education standards, including University Facilities Standards. * 8. Solid trouble shooting skills for performance of building systems. * 9. Knowledge of building systems, including architectural, electrical, plumbing, fire suppression, and building automation and control systems. * 10. Thorough knowledge of CEM, CEFP, LEED, or additional certification programs in engineering, energy, or facility management. * 11. Moderate working skills with AutoCAD. * 12. Solid knowledge and Microsoft Office and Adobe products. * 13. Solid verbal and written communication skills. * 14. Solid technical writing ability. Appointment Information This is a 100% full-time Academic Professional position, appointed on a 12-month basis. The expected start date is as soon as possible after 1/26/2026. The budgeted Salary Range for this position is $100,000 to $115,000. Application Procedures & Deadline Information Applications must be received by 6:00 pm (Central Time) on 1/26/2026 (Extended). Apply for this position using the Apply Now button at the top or bottom of this posting. Applications not submitted through ************************* will not be considered. For further information about this specific position, please contact Ken McCray at ********************* or ************. For questions regarding the application process, please contact ************. The University of Illinois offers a very competitive benefits portfolio, depending on the position. Click for a complete list of Employee Benefits. The University of Illinois System is an equal opportunity employer, including but not limited to disability and/or veteran status, and complies with all applicable state and federal employment mandates. Please visit Required Employment Notices and Posters to view our non-discrimination statement and find additional information about required background checks, sexual harassment/misconduct disclosures, and employment eligibility review through E-Verify. Applicants with disabilities are encouraged to apply and may request a reasonable accommodation under the Americans with Disabilities Act (2008) to complete the application and/or interview process. Accommodations may also be requested on the basis of pregnancy, childbirth, and related conditions, or religion. Requests may be submitted through the reasonable accommodations portal, or by contacting the Accessibility & Accommodations Division of the Office for Access and Equity at ************, or by emailing accessibility@illinois.edu. Requisition ID: 1033775 Job Category: Professional Administration Apply at: *************************

Product Engineer/Production Test Engineer At Smartz Inc, we rely on our dynamic team of engineers to solve the many challenges and puzzles that come with integrating IoT smart devices. We are seeking a product engineer who is ready to work with new technologies and architectures in a forward-thinking organization that's always pushing boundaries. You will assist in creating product requirements and you will test hardware integration of Internet of Things products. You will take a customer-centric approach to champion product features, functionality and experience and play a key role in the product development phases by collaborating with cross functional teams and stakeholders. About Us Smartz was founded in June of 2021 by Dr. Kevin Wan, who has been a successful entrepreneur in the smart home industry for more than 10 years. Our team at Smartz wants to disrupt the PropTech Industry by providing advanced AI software that is compatible with industry-leading smart home devices and will provide property owners and tenants with an all-in-one solution to all of their property management needs. Our team uses the latest mobile technologies for all features of Smartz apps, which include live video streaming/recording, motion/sound alerts, AI-powered object detection, video access sharing functions, etc. We always strive to develop innovative features to create secure and smart device management experiences for our users and business partners. Job Type Full-time (Champaign, IL) Job Responsibilities Understand the hardware and software vision and roadmap for Internet of Things products Own post release product quality by solving top engineering issues together with developers Help hardware and software testing to improve quality before official release Work closely with Technical Support team to classify and prioritize customer issues Take tech support escalation as needed Proactively define/build product metrics to identify issues Build tools/processes which can easily propagate for new Smartz products Schedule product release plan for App, Cloud, and firmware for Smartz Communicate project plan, priority, and schedule to internal teams and partners Work as QA to assure every release meets predefined quality bar Improve release processes. Utilize external tools as appropriate Continually work towards making improvements in QA and release process Demonstrates teamwork and values that foster a positive team culture Technical Skills Requirements 2+ years' experience in IT, Network, QA, device/system installation or relevant technology field Passionate about Smart Home and IoT devices Strong problem-solving skill with a hands-on approach Excellent internal and external communication skill Understanding of Systems development life cycle and agile development Experience & Qualifications Bachelor's degree in Network, IT, security systems, or related technology field preferred Benefits Company paid Medical, Dental, Vision, and Life insurance Retirement and savings plan with company match Unlimited PTO Smartz's commitment to diversity and inclusion is one we strive to cultivate continuously. We aim to provide everyone, regardless of identity, a space where they can grow and feel seen as a person first. These are more than just words to us; they are guidelines for how we build and foster our team, our leaders, and the core culture of our company. We are also an equal opportunity employer that does not discriminate based on any protected attribute, including race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, marital or veteran status, pregnancy or disability, or any other basis protected under applicable law. In accordance with the law, we make reasonable

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Candidate Responsibilities: The primary responsibilities of this position are to develop cost models to support IPSD's cost reduction efforts. This position will work with Engineering and Global Purchasing to calculate part number price and compare to purchase order price. Job Duties/Responsibilities may include, but are not limited to: * Develop cost models * Contribute and enable new products or processes * Develop and manage the project to the plan * Perform needs analysis and initiate ideas * Evaluate new products and/or processes * Keep up to date on new technologies or develop new technologies Required Qualifications: * Four year Engineering/Computer Science degree or with equivalent experience * Excellent analytical skills * Ability to communicate technical information effectively * Excel, Power point Preferred Qualifications: * Database (SQL, Access) and programming skills * Knowledge of manufacturing processes Typical Day: Work with team members from several teams such as engineering, purchasing and manufacturing to develop cost models. Typical day would be working on the computer to run the cost models and have 1 or two meetings to have discussion with the requester of the cost model. Work with manufacturing individuals and purchasing to gather information. Qualifications Technical Skills: Excel, Powerpoint required SQL, ACCESS and Programming skills highly desired. Soft Skills: Team player who works with diverse teams to gather and present information. Additional Information To know more about the position, please contact: Jeff Demaala ************

Job Title Biomedical Clinical Engineer Danville, IL Description The Biomedical Engineer is responsible for maintaining and managing medical equipment, ensuring it meets regulatory standards, and supporting healthcare operations. This role involves overseeing a hospital biomedical equipment program, leading a team, and acting as a subject matter expert in the field of biomedical engineering. The Biomedical Engineer will provide technical expertise on medical equipment, from initial concept to effective implementation, while ensuring safety and compliance with healthcare standards and regulations. Essential Duties and Responsibilities Manage a hospital biomedical equipment program, ensuring compliance with healthcare standards and regulatory agencies (e.g., VHA, TJC, SMDA). Oversee the medical equipment management program, including conducting hazard investigations and managing recalls and safety alerts. Act as a subject matter expert in biomedical engineering, supporting specialized clinical technology, including system administration, training, quality assurance, and life-cycle management. Advise clinical and administrative staff on medical technology, including emerging technologies, ensuring long-term viability, compatibility, and safety. Apply project management principles to the deployment of medical equipment and health information technologies. Conduct capital asset and infrastructure planning for medical equipment, including the installation and implementation of complex medical devices. Develop and manage a continuing education program addressing the safe and effective use of medical technology. Collaborate with stakeholders at various levels of the organization to ensure effective communication and teamwork. Ensure compliance with regulatory requirements from agencies such as the International Standard Organization and healthcare industry regulatory bodies. Travel Minimal travel may be required. Qualifications Bachelor's degree or higher in Engineering or Certification as a Clinical Engineer (CCE). Minimum of 3 years of hospital or healthcare experience maintaining medical equipment. Minimum of 3 years of supervisory experience managing a biomedical equipment program in a hospital. Strong knowledge of computer-based medical systems, networking protocols, and information security as applied to medical technology within the VHA. Competency in medical equipment management, including compliance with healthcare standards, safety, and recall programs. Ability to manage the entire life-cycle of medical technology, from initial concept to implementation, while advising on viability, safety, and long-term suitability. Strong project management skills related to medical equipment and health information technologies. Knowledge of regulatory requirements and industry standards, including those set by the International Standard Organization. Excellent communication and collaboration skills with technical and professional staff. Must provide documentation of eligibility to legally work in the United States. Must be able to pass client background screening for security clearance. Work Environment This role is based in a hospital setting, with exposure to medical equipment and clinical environments. The Biomedical Engineer will interact with clinical, administrative, and technical staff to ensure the proper functioning of medical technology. Physical Demands This role may require the physical ability to inspect, install, and maintain medical equipment, including lifting and maneuvering devices as needed. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Salary $ 45.67 - $57.00 per hour $ 95,000.00 - $118,560.00 Annualized Benefits · 401K Employer Matching · PTO · Holidays · Health /Dental/Vision Insurance · Employer-paid Life and AD&D Insurance · Employee-paid voluntary benefits · Employee development resources Equal Opportunity Employer Capital i is an equal opportunity employer. We prohibit discrimination and harassment of any kind based on any protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Capital i makes hiring decisions based solely on qualifications, merit, and business needs at the time. Capital i is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application process. If you need assistance or an accommodation due to a disability, you may contact us at **********************.

MSA has an opportunity for a Project Engineer Public Works at our Champaign, IL office. As a licensed engineer (PE), this position primarily supports local municipal engineering clients/projects. This position is Flex Time eligible, and hybrid working arrangements are possible. Flex Time is a benefit for salaried staff that recognizes when you work over 40 hours in a week, in addition to your standard PTO (for example: work 42 hours this week, have 2 hours of Flex Time to use as future time off). Who we are & how we help What does it mean to serve communities for over 100 years? It means doing the type of work that helps people raise a family, grow a business, engage with their neighbors, and enjoy a variety of unique, enduring spaces that form the fabric of “home.” MSA's roots reach back to 1919. What began with an entrepreneurial solo practitioner in Baraboo, Wisconsin, has grown into a robust and thriving company of over 400 employee owners conducting work across the country. As a 100% employee-owned firm, when we say we “own” our work, we mean it. We stand behind the quality of our designs, the integrity of our people, and the generations of client relationships we've formed based on trust, firm handshakes, and the belief that together - we can accomplish anything. Commitment to DEIB MSA seeks to provide a workplace where everyone can feel secure in bringing their authentic selves to work, where opportunities to learn and succeed are afforded to all, and in which diversity of perspective leads to an innovative and successful employee-owned firm. Responsibilities The work you will do Client relations including attendance at client meetings and interaction with existing and new clients Project management including project planning, scoping, budgeting and QA/QC Design and administration of construction on infrastructure projects Project experience in potable water, storm water and wastewater projects among more Assist with mentoring junior engineering staff Preparation of plans, details, specifications, and bidding documents Preparation of technical reports and regulatory permits for projects Qualifications What you bring Skills & Knowledge / Education & Experience: Bachelor's degree in Civil Engineering (or related) required 4+ years of prior experience within the Public Works market, serving multiple clients required PE license required, IL PE preferred. Experience in managing multiple projects and client needs required Extensive knowledge of regulations and requirements within Wisconsin preferred Experience with funding and grants available to municipalities preferred This position requires you to have authorization to work in the United States for any employer. We will not provide sponsorship for this position. The salary for this position ranges from $79,081 to $126,529 per year commensurate with experience. Higher compensation within this range will be paid to candidates with significant experience and exceptional qualifications. Benefits Why MSA? We're glad you asked! Better Together - A collaborative work environment that promotes open doors, new ideas and honest opinions. Multi-disciplinary Opportunities - As multi-talented people in a multi-disciplinary firm, we encourage everyone to follow their interests, seek new experiences and apply their skills where they feel most impactful. We've Got Your Back - Support when you need it, independence when you don't. We're 400+ team members strong, operating as one cohesive MSA. Passion & Purpose - We're passionate about what we do and proud of it! Join us to share inspirations, “geek out” and think big. Pay & Perks - We offer competitive industry pay and a variety of perks - just a few of the things that make us uniquely MSA. Communities of Practice - Our CoPs are our company think tanks and idea generators, the perfect means to regularly share, collaborate and learn together. Work-Life Integration - Life doesn't stop when the work day begins. MSA supports our employees as professionals, parents, citizens and friends - with the understanding and flexibility to meet your obligations and balance your time. Commitment to Learning - We support the professional aspirations of our employees with ongoing training options, tuition reimbursement opportunities, and the technology to keep us connected, creative and competitive. Community Engagement - We give back to the communities in which we live, work and play. MSA employee owners are volunteers, educators, STEM outreach participants and event attendees, supported by dedicated corporate sponsorship and donations initiatives. There's more! Eligible employees will also enjoy the following benefits: Quality Insurance Options - Medical, dental and vision coverage for you, your spouse or domestic partner and eligible dependents Paid Time Off - All full-time employees will receive, at minimum, 17 days (that's 3+ weeks!) of paid time off in the first year alone. Paid Holidays - MSA offers time off pay for 8 holidays in every calendar year. Paid Parental Leave - Both parents will receive 2 weeks of paid time off and birth parents are eligible for additional paid time off under MSA's Short Term Paid Leave. The paid 2 weeks of time also applies to adoption and foster care placement. Supplemental Insurance - MSA pays 100% for all employees to have life insurance, long-term disability insurance and short-term disability insurance. Employee Stock Ownership Plan (ESOP) - MSA is an ESOP S-Corporation, which means that our company is 100% owned by us! Through the ESOP, eligible employees receive MSA stock in the form of company shares as a percentage of compensation, at no cost to the employee. 401k Retirement Savings Plan - Employees can also choose to participate in a 401k plan, with a generous employer match that is immediately 100% vested. Short Term Incentive (STIP) - This program rewards employees who meet performance goals with a one-time annual STIP payment as a percentage of their eligible compensation - recognition of individual accomplishments and achieving organizational goals. STIP payments are awarded if MSA reaches its corporate financial plan for the year. MSA is an equal opportunity/affirmative action employer that is committed to diversity and inclusion in the workplace. At MSA, we value a diverse, inclusive workforce and we provide equal employment opportunity for all applicants and employees. All qualified applicants for employment will be considered without regard to an individual's race, color, sex, gender identity, gender expression, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other basis protected by federal, state or local laws. If you are unable to submit your application because of incompatible assistive technology or a disability, please contact us at ************* Equal Employment Opportunity/Affirmative Action Employer Benefits We can recommend jobs specifically for you! Click here to get started.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading - PDFs, books, Google Docs, news articles, websites - into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting - Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do Work alongside machine learning researchers, engineers, and product managers to bring our AI Voices to their customers for a diverse range of use cases Deploy and operate the core ML inference workloads for our AI Voices serving pipeline Introduce new techniques, tools, and architecture that improve the performance, latency, throughput, and efficiency of our deployed models Build tools to give us visibility into our bottlenecks and sources of instability and then design and implement solutions to address the highest priority issues An Ideal Candidate Should Have Experience shipping Python-based services Experience being responsible for the successful operation of a critical production service Experience with public cloud environments, GCP preferred Experience with Infrastructure such as Code, Docker, and containerized deployments. Preferred: Experience deploying high-availability applications on Kubernetes. Preferred: Experience deploying ML models to production What We Offer A dynamic environment where your contributions shape the company and its products A team that values innovation, intuition, and drive Autonomy, fostering focus and creativity The opportunity to have a significant impact in a revolutionary industry Competitive compensation, a welcoming atmosphere, and a commitment to an exceptional asynchronous work culture The privilege of working on a product that changes lives, particularly for those with learning differences like dyslexia, ADD, and more An active role at the intersection of artificial intelligence and audio - a rapidly evolving tech domain The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Manufacturing EngineerFull TimeManagement Champaign, IL, USApply Production Engineer Job Description The Manufacturing Engineer will be responsible for the supervision, formulation, administration and coordination of industrial and manufacturing engineering projects, policies, processes, methods, and procedures designed to improve operating performance, reduce waste and delays, and otherwise promote cost reductions on a company-wide basis. Support new product start-up & launches. Duties & Tasks: Planning and coordinating production engineering processes daily to produce high quality products. Developing process improvements to effectively utilize equipment and materials to maximize production. Developing operational strategies to achieve production and financial objectives. Identify opportunities or implement changes to improve products or reduce costs using knowledge fabrication processes, tooling, and production equipment, assembly methods, quality control standards, or product design materials and parts. Investigate and/or resolve operational problems such as material use variances and bottlenecks. Estimate costs, production times, or staffing requirements for existing and new designs. Using time study or standard data for a variety of machine, assembly, and hand material utilization in order to improve operating performance. Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods. Provide technical expertise or support related to manufacturing. Incorporate new methods and processes to improve operations. Review product designs for manufacturability and completeness. Monitoring the production operations and ensuring everyone's adherence to safety protocols. Train production personnel in new or existing methods Design, install, or troubleshoot manufacturing equipment. Prepare documentation for new manufacturing capabilities, production schedules, or other information to facilitate production processes. Evaluating the staff's performance and strategizing on maximizing productivity Evaluate manufactured products according to specifications and quality standards. Design layout of equipment and/or workspaces to achieve maximum efficiency. Design testing methods and test finished products or process capabilities to establish standards or validate process requirements. Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of finished product. Develop manufacturing methods, labor utilization standards, and cost analysis systems to promote efficient staff and facility utilization. Recommend methods for improving utilization of personnel, material, and utilities. Plan and establish sequence of operations to fabricate and assemble parts or products and to promote efficient utilization. Coordinate quality control objectives and activities to resolve production problems, maximize product reliability, and minimize cost. Confer with vendors, staff, and management personnel regarding purchases, procedures, product specifications, manufacturing capabilities, and project status. Estimate production cost and effect of product design changes for management review, action, and control. Physical Demands and Work Environment: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to talk and hear, Frequently required to sit, stand, squat, bend at the knees and waist, and walk, Required to use hands to type, handle objects and paperwork, Required to reach and hold on to items at chest level or reach above the shoulder, May be required to lift and carry objects weighing up to 50 lbs., Required to use close vision and be able to focus, Ability to work extended hours as needed, Ability to travel domestic US and/or international if needed, Required to wear PPE as required in each area. Required to use close vision, peripheral vision, and focus and see colors as required to read equipment and material labels, color-coded inventory, computer terminal screens, etc. The employee generally works in indoor office and warehouse environments. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position Requirements and Qualifications Education: Bachelor's degree in mechanical engineering, Industrial Engineering, or equivalent experience. Experience: 3-5 Years of engineering management in an automotive manufacturing environment. Skills Required: Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods. Knowledge of illustrating and interpreting CAD program Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Must be proficient using MS Office applications such as Excel and Word. Full working knowledge of APQP process, flowcharts, work instructions, and control plans. Must be a team player and work well with others in process development, corrective action and problem solving. Full working knowledge of and committed to continuous improvement principles. Ability to effectively handle multiple activities simultaneously and successfully function in a cross functional manufacturing environment. Complies with all HTGSS Certification standards; Management System (TS16949), Environmental ISO 14001-2015 and Health and Safety ISO 45001-2018 policies and procedures. Understanding of ERP Maintenance System Understanding of Network, DB protocol PFMEA experience preferred. Welding experience preferred. Understanding of Pilot, PMEA, Control Plans, LOTO manual, equipment daily checklists preferred. Competency Requirements: Confidentiality: Adheres to the upmost confidentiality; particularly regarding handling employment/personal information. Works with the team to ensure that all information from within the department is kept private. Multitasking: Must possess the ability to change from one task to another in quick manner based on company needs Communication: Works to ensure respectful, timely, accurate and appropriate communication across all levels of the organization. Initiative: Identifies problems and takes action to address current or future problems. Proactively engages to solve issues verses simply thinking about future actions. Engagement: Engages team members in developing goals, executing plans, and delivering results (output). Motivates team members through clear and consistent communication. Model's adaptability. Uses collaboration and influence skills to achieve successful outcomes. Leads by Example: Sets a good example for peers to follow. Integrity: Performs in such a way as to inspire a high degree of trust and acceptance amongst co-workers across all departments Customer Service Orientation: Focuses efforts on discovering and meeting the customer's needs. Develops trust in all relationships internally and externally. Organizational and Self Discipline: Efficiently organizes and executes assignments. Demonstrates self-discipline and reliability. Analytical Skills / Problem Solving: Understands situations, problems, or issues by breaking them down into smaller pieces, or tracing the implications of a situation in a step-by-step way. Systematically organizes the parts of problems. Makes systematic comparisons of data or aspects, prioritizing, planning, and developing countermeasures. Flexibility / Adaptability: Adapts and works effectively in a variety of situations and with various individuals or groups. Seeks and appreciates opposing perspectives on issues. Adapts approach as the requirements of the situation change. Changes or easily accepts change in organization or job requirements. Works Safely: Strives for an accident-free workplace. Keeps safety at the “heart” of everything done. Treats safety as a personal responsibility and sees oneself as being responsible for the safety of others. Teamwork: Contributes meaningfully to work group efforts by offering new ideas for improvement. Demonstrates a cooperative manner in dealing with supervisors and other team members. Does his/her part toward group effort Mutual Respect and Support: Works cooperatively with others. Welcomes and takes advantage of opposing ideas and opinion is always respectful to others. Reporting: Reports to: Production Director Benefits: 401(k) Healthy Insurance Life Insurance Supplemental Insurance Dental Insurance Vision Insurance Paid time off Hyundai Transys Georgia Seating System is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Hyundai Transys Georgia Seating System is committed to achieving a diverse workforce through application of its equal opportunity, non-discrimination, anti-harassment policies in all aspects of employment including recruitment, hiring, promotions, transfers, discipline, terminations, wage and salary administration, benefits, and training. All employment decisions at Hyundai Transys Georgia Seating System are based on business needs, job requirements and individual qualifications without regard to race, color, religion or belief, sex, sexual orientation, gender identity, family or parental status, national origin, veteran status, disability, or any other status protected by the laws or regulations in the locations where we operate. This Position Description is intended as a summary of the job responsibilities for this position. HTGSS reserves the right to add, remove, and/or alter job responsibilities in whole or in part with or without notice. Additionally, all HTGSS team members are subject to all other HTGSS policies and procedures, including those set out in HTGSS's Team Member Handbook. This Position Description is not a contract. Every Team Member's employment with HTGSS is voluntary and is subject to termination by the team member or HTGSS at will, with or without cause, and, with or without notice, at any time. Nothing in this Position Description or HTGSS policies shall be interpreted to be in conflict or to eliminate or modify in any way the employment-at-will status of HTGSS team members.

Job Title: Manufacturing Engineer - First ResponderJob Description The Manufacturing Engineer - First Responder will support the Lower Powertrain Group, which oversees manufacturing engineering responsibilities for axle assemblies, final drives, brakes, and related components for large mining trucks, off-highway trucks, wheel tractor scrapers, and motor graders. This role is critical for ensuring smooth production operations, driving continuous improvement, and supporting safety and quality initiatives. Responsibilities * Serve as the primary point of contact on the production floor during first shift with occasional flexibility to meet second or third shift needs. * Participate in daily production start-up meetings to understand goals, challenges, and safety/quality messages. * Respond promptly to issues raised by production teams, investigate root causes, and develop actionable solutions. * Conduct audits of standard work procedures to ensure compliance and identify improvement opportunities. * Collaborate with operators and team members to refine processes for safety, quality, and efficiency. * Update standard work documentation and implement changes in manufacturing systems. * Work with tool design teams to procure or design new tools as needed. * Issue purchase orders for replacement or new equipment to improve processes. * Evaluate and improve area layouts, material presentation, and overall organization to enhance efficiency and safety. * Support implementation of engineering changes, including tooling updates and standard work modifications. Essential Skills * Bachelor's Degree in Engineering. * Experience in manufacturing engineering and assembly processes. * Familiarity with process improvement, lean manufacturing, and process engineering. * Proficiency in automation and continuous improvement practices. Additional Skills & Qualifications * Experience with CAP (client-specific systems), Teamcenter, and AutoCAD. * Proficiency in Microsoft Office Suite. * Prior engineering internship experience. Work Environment Work at a manufacturing site in North America, operating since 1955, covering approximately 3,000,000 sq. ft. with around 3,100 employees. The environment focuses on lower powertrain assembly, supporting axle assemblies, final drives, brakes, and related components for large mining trucks and other heavy machinery. This is a full-time, 5 days per week onsite role with a primary schedule on first shift, but expect occasional overlap with second or third shifts. The work setting is dynamic and hands-on, emphasizing safety, precision, and collaboration. Job Type & Location This is a Contract position based out of Champaign, IL. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Champaign,IL. Application Deadline This position is anticipated to close on Jan 27, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.