Engineering Associate Jobs in Clifton Park, NY

Building Design (MEP) Engineer CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Building Design Engineer for the Albany office. The Building Design Engineer is an Engineer-in-Training on the path to licensure with between 0-5 years of experience. The successful candidate should possess an Associate's, Bachelor's, or Master's degree of Engineering. The candidate must have at least 1-3 years of Revit experience. This position is responsible for providing technical support in the development and design of engineered building systems. SPECIFIC DUTIES AND RESPONSIBILITIES: Under direction of Project Engineer, creates construction documents and document sets, including but not limited to plans, details, sections, schedules and legends. Guides the development of the work of others on some projects. Adheres to and implements firm-wide contract documentation procedures and standards. Takes field measurements and documents existing building conditions to develop or modify engineered systems for projects. Under the direction of the Project Engineer, recommends alterations to development and design to improve the design of projects, evaluates conventional system designs and writes technical specifications on projects. Under the direction of the Project Engineer, serves as an in-house project representative for building systems and assists the architectural staff in coordination of the architectural elements with building systems. Has knowledge of commonly used concepts, practices, and procedures within the field and relies on the Project Engineers instructions to perform the functions of a system design. Researches applicable codes and standards for use in the design of building systems and writes project documentation including O&M manuals. Assists Project Engineer and/or Project Architect during construction to process submittals and shop drawings. Evaluates equipment and systems submittals and determines if they meet contract specifications. Prepares submittals for return to Contractors. Makes calculations using engineering formulas and skills. Uses computer to run standard programs to solve engineering problems. REQUIREMENTS/QUALIFICATIONS: Licensure Requirements: Unlicensed (expectation of pursuing professional licensure) Education Requirements: Associate's, Bachelor's, or Master's degree of Engineering and/or Engineer-in-training (EIT) registration. Experience: Minimum 0-2 years of experience (Summer Internships or 1-2 years experience preferred). Recent college graduate should have good to excellent drafting skills and ability to carry out job responsibilities with close guidance. Computer Skills: Revit- minimum of 1-3 years experience and other design/presentation software programs; 3-D software Excellent written, verbal and visual communication skills Detail oriented, highly organized, self-motivated, accurate, work well under pressure, ability to follow directions and ask questions. 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

Engineering Opportunities – Paper Industry Salary: Up to $135,000 + Benefits + Paid Relocation to MAINE Are you ready to take your engineering career to the next level? We are actively seeking skilled engineers for Maine! With multiple positions available, this is a great opportunity to work in a thriving industry with competitive pay, exceptional benefits, and career advancement opportunities. We are seeking professionals with expertise in process optimization, electrical systems, mechanical reliability, and environmental sustainability. If you're looking for a challenging role where you can apply your knowledge and make a meaningful impact, we encourage you to apply today! Available Positions: • Process Controls Engineer (Electrical or Chemical Eng.) – Optimize production through DCS and PLC controls. • Electrical Engineer – Maintain and enhance high-voltage systems, paper machines, and pulping equipment; oversee capital projects. • Reliability Engineer (Electrical & Mechanical) – Implement predictive and preventive maintenance strategies to improve equipment efficiency. Minimum requirements for these engineering positions: • Bachelor’s degree in Engineering or Paper Science or equivalent experience. • Strong analytical and problem-solving skills with a proactive approach to process improvement. • Excellent communication and teamwork abilities. What We Offer: • Competitive salary up to $135,000 + performance-based bonuses. • Comprehensive benefits including healthcare, retirement plans, and paid time off. • Relocation assistance to Maine—your next great adventure starts here! • Professional growth in a stable industry with a company that values expertise and innovation. • If you're an experienced engineer looking for a rewarding opportunity in a progressive paper manufacturing environment, apply today!

Basic Qualifications Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). Requires an additional 2+ years of job-related experience, or a Master's degree. CLEARANCE REQUIREMENTS: Ability to obtain a Department of Defense Secret security clearance is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position At General Dynamics Mission Systems, we create the technologies, products and services that help our nation's heroes keep our nation safe. The work we do is so advanced, we are continuously moving the boundaries of what's possible. Here you'll work with the best and your talent will be front and center on projects that impact the world. Are you up to the challenge? We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar and everything in between. Showing initiative and exercising judgement, you'll design, develop, analyze, troubleshoot and provide technical skills during research and/or product development, analyze effects of projects upon various areas such as Engineering, Facilities, and the labor pool to determine the most practical and cost-efficient methods to obtain the required resources and design systems, software and equipment layout. Participating on the engineering work team, you'll develop, implement, install, test, modify and/or operate complex equipment and systems as well as support other team members concerning experiment design, materials, equipment setup/maintenance, property management and related issues. What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: A Bachelor's of Science or Technology degree, a related specialized area or field (or equivalent experience) plus a minimum of 2 years of relevant experience; or Master's degree Demonstrate narrowly focused in-depth technical level of practical operational process knowledge in a specific engineering area Demonstrate technical competence in the setup, monitoring and documentation of experiments and/or lab equipment What sets you apart: Experience with preventative and corrective maintanence of complex test systems and lab equipment Experience with electronic and electro-mechanical and/or Hydraulic systems Experience with Teradyne systems and equipment Familiarity with calibration process and procedure of electrical and/or mechanical instruments Creative thinking with the ability to multi-task Commitment to ongoing professional development Team player who thrives in collaborative environments and revels in team success Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $88,178.00 - USD $95,411.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Reality Labs at Meta is building products that make it easier for people to connect with the ones they love most, enjoy top-notch, wire-free MR, and push the future of computing platforms. We are a team of world-class experts developing and shipping products at the intersection of hardware, software and content.As a Realtime Engine Technology engineer at Meta, you can help build new, innovative hardware and software that radically redefine the way people work, play and connect. What we build today could one day be the norm. So to be here today is to truly be at the heart of change and the frontier of what's to come. We're the people helping to define the metaverse. We may not have all the answers. But together, we're getting closer. **Required Skills:** Software Engineer, Realtime Engine Technology - Reality Labs Responsibilities: 1. Architect efficient and reusable systems that drive complex realtime interactive software 2. Build technologies that empower developers to create compelling experiences 3. Optimize and debug real-time systems to ensure smooth performance 4. Influence design, drive engineering implementation and enhance the quality of new and existing technology 5. Lead collaboration with multi-functional teams to achieve successful product outcomes 6. Utilize your specialized expertise to mentor, educate and up level engineers you collaborate with across teams **Minimum Qualifications:** Minimum Qualifications: 7. Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. 8. 7+ years experience as an engineer developing features within 3D real-time interactive products 9. 7+ years experience with systems programming languages such as C++, Rust, or similar languages 10. Proven problem-solving skills and experience working independently and collaboratively 11. Effective communication and interpersonal skills **Preferred Qualifications:** Preferred Qualifications: 12. Experience building engine-level systems for 3D real-time interactive engines ( Unity 3D, Unreal, Frostbite, or other/proprietary ) 13. Experience building for virtual reality (Rift, Quest, VIVE, Valve Index, etc.) or mixed/augmented reality (HoloLens, Magic Leap, ARKit, ARCore etc.) 14. Experience developing SDKs or shared technology that balances the needs of multiple shipping products 15. Experience with performance optimization of real-time applications (CPU, GPU, Memory, etc. ) 16. Deep understanding of one or more real-time engine components ( Rendering, Collision, Physics, Input Processing, Audio, Animation, Networking, etc.) 17. Strong understanding of 3D math, linear algebra and physics **Public Compensation:** $85.10/hour to $251,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

BARCLAY WATER MANAGEMENT, INC. is now part of the Ecolab family! Barclay manufactures a wide range of specialty treatments for controlling water chemistry in heating, cooling, process, and power generating systems. We are looking for a Junior iChlor Engineer to join its industry leading Nalco Water Institutional team. If you are a passionate professional that enjoys interacting with customers and likes to work in an autonomous environment, we invite you to apply. You will be joining a talented team that supports water treatment applications for a variety of industries. In this position, you will manage and develop long standing client relationships, with an intense focus on exceeding client expectations and driving service delivery. You will have a hands-on approach to service and deliver value through developing and managing technical projects to solve customer problems. This role is based in New York. This role will require travel to onsite customers throughout upstate New York and surrounding states using your own personal vehicle. What's in it For You * You will join a large growing company and work with some of our leading customers * Flexible, independent work environment where you will plan your own schedule * Access to best-in-class resources, tools, and technology * Comprehensive benefits packages in line with market and industry standards * Opportunity for a long term, advanced career path in service, sales, corporate accounts or management * Thrive in a company that values a culture of safety to include top-notch safety training and personal protection equipment What You Will Do * Provide routine service support to Sales Representatives in strategic district accounts to execute agreed upon customer system assurance and continuous improvement plans * Assist Sales Representatives with plant surveys of prospective customers * Assist Sales Representatives with start-ups of new applications in both existing customers and in new accounts * Develop strong relationships with the key stakeholders in the strategic district accounts where you provide service support to other District Sales Representatives * Provide technical support to customers; identifying and resolving customer pain points, escalating as required * Engage in problem solving by performing system analysis, interpreting data and providing written recommendations to ensure customer operations are performing at optimal levels * Support services include: Sample testing, light maintenance, customer service, service report generation, chemical ordering, chemical inventory management, general labor activities * Follow Ecolab safety guidelines and incident reporting requirements Minimum Qualifications * Bachelor's degree in an Engineering field OR five (5) years of professional plumbing and/or HVAC experience * Experience working with Microsoft Office Suite * Possess a current and valid Driver's License * Immigration sponsorship not available for this role Preferred Qualifications * Water treatment or specialty chemical industry experience * Working knowledge of boilers, cooling towers, and wastewater treatment systems would be an advantage * Carry aptitude and confidence to deal with large national and multi-national customers * Strong mechanical aptitude * Experience working with MS Excel Spreadsheets * Excellent written and verbal communication Annual or Hourly Compensation Range: The base salary range for this position is $70,000.00 - $76,000.00. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: * Undergo additional background screens and/or drug/alcohol testing for customer credentialing. * Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Imagine building your career by developing the solutions that support the mission of our nation's service members, intelligence analysts and first responders. That's the challenge that's waiting for you at General Dynamics Mission Systems. Here you have the opportunity to redefine innovation and excellence for the world. Are you ready? Then make a career move that makes an impact at General Dynamics Mission Systems. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar and everything in between. Utilizing your creativity and innovative engineering skills, you'll participate in engineering teams supporting experiment design, materials, equipment setup and maintenance and related issues as well as perform research and engineering laboratory functions involving the layout, building, testing, troubleshooting and repairing of devices, assemblies, subsystems, and systems. You'll also provide technical expertise to customers, users or company personnel either at domestic or international field sites. What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: A Bachelor's of Science or Technology degree in Engineering, a related field or equivalent Technical competence in the setup, monitoring and documentation of experiments and/or lab equipment What sets you apart: Shows initiative and professionally executes projects with little direction Commitment to ongoing professional development Team player who thrives in collaborative environments and revels in team success Target salary range: USD $72,913.00/Yr. - USD $78,894.00/Yr. This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Additional Qualifications/Responsibilities Basic Qualifications Requires a Bachelor's or Technology degree in Engineering or a related specialized area/field, or equivalent (4 years job-related experience). CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required.

Come and join our powerful, unified force with the energy to change the world. Our mission is BIG. Our TRANSFORMATION is key - bringing the right businesses together to LEAD the ENERGY TRANSITION. Our TEAM is ready. The Onshore Wind Engineering Technician role is a hands-on, in-person operational support role located in Schenectady, NY. The successful candidate will learn how to demonstrate proficiency in maintaining and managing assembly tools with the proper function, calibration, and upkeep. This tooling is used in the assembly of wind turbines, guaranteeing operational safety and efficiency in the GE's world class 6MW+ onshore wind turbine factory. Job Description Essential Responsibilities: * Be responsible for preventive and corrective maintenance on hydraulic, pneumatic, electric, and manual tools/equipment. * Conduct periodic calibrations according to manufacturer specifications and internal standards. * Diagnose faults in torque tools and carry out repairs or forward them to specialized service centers. * Manage the inventory of torque tools (check-in, check-out, usage, maintenance, and disposal). * Track the life cycle of equipment and issue performance and condition reports. * Ensure proper storage and readiness of all tools in compliance with safety and operational standards. * Test torque tools and validate accuracy before dispatching them to field teams. * Assist in training operators on the safe and correct use of torque equipment * Maintain accurate records of inspections, calibrations, and maintenance (manual or via CMMS system). * Issue calibration certificates, inspection reports, and technical assessments as required by audits or quality standards. * Support Manufacturing Engineers in their activities related to the assembly process. Qualifications/Requirements: * High School Diploma/GED * Currently pursuing a degree in a technical program or relevant apprenticeship Desired Characteristics: * Manufacturing Experience * Strong grasp of physics, mathematics, hydraulics, computer & programming skills, six sigma methodologies, electrical & mechanical diagnostic techniques, safety, and environmental concerns. * Proficiency in the use of computer systems and current office suite programs i.e. Microsoft Word, Excel, and Access. * Effective written and verbal communication skills. * Ability and willingness to work nights and weekends as required. * Strong safety focus * Technical accuracy and attention to detail * Proactivity and problem-solving skills * Teamwork * Commitment to deadlines and quality ABOUT US Inclusion & Diversity At GE, we believe in the value of your unique identity, background and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: ************************************************** For U.S. based candidates only, for purposes of complying with U.S. pay transparency requirements, the base pay range for this position is $1,035.34 - $1,466.42 USD Weekly The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position will stay open on the career website until at least 6/19/2025 Benefits Available to You: GE employees rise to the challenge of building a world that works. In order to meet this mission, we provide varied, competitive benefits to help support our workforce: Our Culture | GE Vernova (gecareers.com) * Our compensation & benefits are designed to help you manage your personal and family needs, while rewarding high performers. We offer a robust benefits package depending on your employment status and your national requirements. * A healthy, balanced lifestyle can mean different things to different people. We've created programs that support the way you live and work today. * GE invests to provide opportunities to grow your career by providing a path for continued on-the-job learning and development. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. About GE Vernova Gas Power GE Vernova's Gas Power business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. It is a global leader in gas turbines and power plant technologies and services with the industry's largest installed base. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world's most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit *********** Summary of Role: Typically performs one or more of the following in capacity of either an individual contributor (as directed and/or independently), or as a manager: Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairs units or products that have failed to meet requirements. Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Essential Responsibilities: Develop and maintain 3D models for various components and assemblies used in semiconductor equipment. Conduct material analysis to ensure the suitability and durability of parts used in the manufacturing process. Manage relationships with suppliers to enable outsourcing of manufactured parts. Work with Modules to determine High Leverage Opportunities and turn them into productivity results. Manage qualification timelines with modules to ensure efficient turnaround of cost savings initiatives. Make adjustments to design, material and manufacturing type based on module feedback. Generate and execute standard work practices for 3D modeling and part manufacturing. Manage multiple projects simultaneously without impacting quality. Other Responsibilities: Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs. Required Qualifications: Education - Bachelor's Degree in Mechanical or Materials Engineering, Military Equivalent, Trade Equivalent, or equivalent experience Experience - Min of 2 years' experience Travel - Up to 10% Strong communication skills and ability to work within a tightly coupled team. Strong project management and organizational skills required. Language Fluency - Fluent in English Language - written & verbal Physical Capacity Demands Able to work in a cleanroom environment per semiconductor protocol/requirements Able to wear all required clean room protective clothing and equipment Lifting to 40 pounds / bending / twisting Preferred Qualifications: Direct experience working in semiconductor manufacturing. Direct experience with 3D printing and CNC machining. Experience with Autodesk Fusion 360. Strong team player with ability to work well within a global team. Expected Salary Range $65,400.00 - $145,800.00 The exact Salary will be determined based on qualifications, experience and location. If you need a reasonable accommodation for any part of the employment process, please contact us by email at usaccommodations@gf.com and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. An offer with GlobalFoundries is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations. GlobalFoundries is fully committed to equal opportunity in the workplace and believes that cultural diversity within the company enhances its business potential. GlobalFoundries goal of excellence in business necessitates the attraction and retention of highly qualified people. Artificial barriers and stereotypic biases detract from this objective and may be illegally discriminatory. All policies and processes which pertain to employees including recruitment, selection, training, utilization, promotion, compensation, benefits, extracurricular programs, and termination are created and implemented without regard to age, ethnicity, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, sexual orientation, gender identity or expression, veteran status, or any other characteristic or category specified by local, state or federal law

Department/Unit: Clinical Engineering Work Shift: Day (United States of America) Salary Range: $65,102.17 - $100,908.37 The Clinical Engineering Technician provides onsite and remote support for all medical equipment and systems and in person support needs. The Clinical Engineering Technician will take ownership of issues escalated to them and work to resolution utilizing all skills, experience, training, documentation and resources at their disposal. The Clinical Engineering Technician escalates and notifies employees appropriately according to documented standard operating procedures. The Clinical Engineering Technician is responsible for an exemplary customer service experience for all Albany Med employees during their interaction with Clinical Engineering. The Clinical Engineering Technician acts as a liaison between the customers and Information Services to resolve any issue that is reported, and will fulfill any project based or new requests that are assigned to them in the documented timelines. The individual will utilize their knowledge and experience in combination with departmental standard operating procedures, processes, documentation and training to resolve issues. The individual will receive little supervision and will have latitude in decision making on resolving issue. The individual is expected to escalate systemic issues that are appropriate to communicate to senior peers or management, while still taking ownership of any issue that needs to be resolved and using their experience and knowledge to determine and fulfill the resolution. The individual will have knowledge of and excel at providing customer service and ensure that all written and verbal interactions with users meet those standards. The individual will have exemplary personal work ethic and strive to work effectively and efficiently. Typical responsibilities include: Support * Respond to problems called in and repair the malfunctioning equipment in a timely manner, while resolving the root cause issue rather than the symptom of the issue * Provide support with medical device troubleshooting, configuration and diagnostic tools * Support enterprise future business growth and the movement and/or expansion of enterprise units * Incorporate customer service standards into all daily work flows and actions * Work as part of a team to meet goals set forth by Information Technology management * Exceed documented and communicated statistical metrics that drive overall departmental performance; * Take ownership of issue and incident resolution * Provide all support actions that assist in the betterment of the end user experience of the Albany Med community Supervision * This position will provide guidance to the Clinical Engineering and Radiology Engineering Technician - Level I, II, and III positions, as well as train new Clinical Engineering Technician - Levels I, II, and III on their job responsibilities. Contact with others * High degree of contact internal and external to Albany Med including any user of any Albany Med medical device or system. Other * Maintain current technical expertise in the rapidly changing technology of Albany Med * Use customer feedback as a basis for taking actions, which solve customer problems quickly and effectively * Provide best effort support for non-standard devices * Participate in on-call rotation and help troubleshoot customer issues * Perform at or above the Information Technology performance standards * Fulfill department requirements in terms of providing work coverage and administration notification during periods of absence (personnel illness, vacation, education, etc.) Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a "need to know" and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

BARCLAY WATER MANAGEMENT, INC. is now part of the Ecolab family! Barclay manufactures a wide range of specialty treatments for controlling water chemistry in heating, cooling, process, and power generating systems. We are looking for a Junior iChlor Engineer to join its industry leading Nalco Water Institutional team. If you are a passionate professional that enjoys interacting with customers and likes to work in an autonomous environment, we invite you to apply. You will be joining a talented team that supports water treatment applications for a variety of industries. In this position, you will manage and develop long standing client relationships, with an intense focus on exceeding client expectations and driving service delivery. You will have a hands-on approach to service and deliver value through developing and managing technical projects to solve customer problems. This role is based in New York. This role will require travel to onsite customers throughout upstate New York and surrounding states using your own personal vehicle. What's in it For You You will join a large growing company and work with some of our leading customers Flexible, independent work environment where you will plan your own schedule Access to best-in-class resources, tools, and technology Comprehensive benefits packages in line with market and industry standards Opportunity for a long term, advanced career path in service, sales, corporate accounts or management Thrive in a company that values a culture of safety to include top-notch safety training and personal protection equipment What You Will Do Provide routine service support to Sales Representatives in strategic district accounts to execute agreed upon customer system assurance and continuous improvement plans Assist Sales Representatives with plant surveys of prospective customers Assist Sales Representatives with start-ups of new applications in both existing customers and in new accounts Develop strong relationships with the key stakeholders in the strategic district accounts where you provide service support to other District Sales Representatives Provide technical support to customers; identifying and resolving customer pain points, escalating as required Engage in problem solving by performing system analysis, interpreting data and providing written recommendations to ensure customer operations are performing at optimal levels Support services include: Sample testing, light maintenance, customer service, service report generation, chemical ordering, chemical inventory management, general labor activities Follow Ecolab safety guidelines and incident reporting requirements Minimum Qualifications Bachelor's degree in an Engineering field OR five (5) years of professional plumbing and/or HVAC experience Experience working with Microsoft Office Suite Possess a current and valid Driver's License Immigration sponsorship not available for this role Preferred Qualifications Water treatment or specialty chemical industry experience Working knowledge of boilers, cooling towers, and wastewater treatment systems would be an advantage Carry aptitude and confidence to deal with large national and multi-national customers Strong mechanical aptitude Experience working with MS Excel Spreadsheets Excellent written and verbal communication Annual or Hourly Compensation Range: The base salary range for this position is $70,000.00 - $76,000.00. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here . Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

GE Aerospace researchers tackle the most challenging problems through multi-disciplinary teams where Physical and Digital technology intersect and lead to truly inventive outcomes. Together, we create and sustain differentiated solutions to maintain competitive advantages for our GE Aerospace business and external customers, such as the U.S. Department of Defense and the U.S. Department of Energy. As a Research Engineer - Combustion, you will be a member of a world-class team that is focused on developing cutting-edge turbine engine combustion technology and advanced concepts for advanced air-breathing propulsion systems. You will perform research and development of combustion technology and systems that will support GE Aerospace and other partners such as the US Government. **Job Description** **Roles and Responsibilities** You will work in a team carrying out research and development of next generation combustion technology for low-emissions gas turbines and other high-speed air-breathing propulsion systems. In this role you will: + Work with technicians and engineers to design and install new experimental hardware + Perform high-pressure combustion experiments simulating engine operation and analyze data + Contribute to project reviews and archive results - recommend design improvements + Work with other engineers in developing new combustion models and analysis tools + Lead cutting edge research in turbine engine combustion and high-speed propulsion + Work as part of a team executing on multi-generation technology programs to enable future design advancements **Required Qualifications** + Doctorate in Mechanical Engineering, Aerospace Engineering or related disciplines OR Master's degree in Mechanical Engineering, Aerospace Engineering or related disciplines with at least 5 years of relevant experience + Knowledge of combustion, acoustics, thermodynamics, hydrodynamics, and combustion chemistry + Experience with post-processing computational and/or experimental data + Background in advanced mathematics (numerical methods, pde/ode, etc.) + Experience in performing combustion experiments + Demonstrated ability to investigate, model and provide critical insight into complex physical phenomena + Ability to work effectively in a multidisciplinary team + Excellent communication skills and ability to interface with senior leaders and customers with clarity and confidence + Must be willing to work out of an office located in Niskayuna, NY + U.S. citizenship is required due to Federal Contract Provisions **Desired Characteristics** + Background in gas turbine combustion, including: thermo-acoustic instabilities (combustion dynamics), fuel/air premixing systems, flame propagation in complex fuel mixtures, combustion kinetics & chemistry, design and evaluation of new combustion systems, and modeling of combustion systems + Experience with advanced instrumentation and optical diagnostics + Experience in modeling supersonic/hypersonic flows + Peer reviewed journal publications + Experience working with high-pressure, high-temperature combustion experiments + Fluency with Matlab, Python, and COMSOL The base pay range for this position is $80,000 - $150,000 USD Annually. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on July 30st, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job DescriptionDescription: Advance Testing Company, Inc. is currently seeking a full-time Construction Materials Technician to work on projects in the Northeastern United States. Advance Testing, an established New York-based construction materials testing and inspection firm, has opportunities available for individuals to perform testing and inspection of construction materials such as soils, aggregates, concrete, masonry and asphalt. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. Successful candidates will be trained and certified to perform sampling and testing of soil, concrete, and asphalt materials on construction sites and in a laboratory setting through locally and nationally recognized programs. Once trained and certified, employees are considered full-fledged Construction Materials Technicians. Construction Materials Technician – RESPONSIBLITIES Observe work in progress to ensure that procedures and materials used conform to approved drawings and specifications. Perform standard testing of materials. Prepare samples of materials for laboratory testing. Examine workmanship of installations for conformity to specifications. Maintain daily log of construction and inspection activities and complete clear, accurate reports daily. Prepare sketches of construction installations that correlate with testing and inspection sites. Other related duties may be assigned. Construction Materials Technician - QUALIFICATIONS High school diploma or equivalent AS Degree in Civil Engineering Technology, Construction Management, Construction Technology, or similar, OR completed coursework toward a BS Degree in Civil Engineering or similar; Experience with construction materials testing and/or construction industry preferred (will be trained) Strong focus on safe work practices and adherence to all safety protocols Must be detail oriented and able to work independently Must be able to travel and to perform site visits Requires a valid, clean driver’s license Applicants may be required to obtain any security clearances and background confirmation for sensitive projects and locations. Construction Materials Technician - COMPETITIVE SALARY AND BENEFITS PACKAGE In addition to providing competitive salaries, Advance Testing Company, Inc. offers a wide range of benefit options, including: Recently renovated company housing Overtime offered at time and a half Mileage reimbursement and per diem payments Opportunities for professional growth and advancement Paid sick days Paid training and certification Salary Range $18-20 per hour Requirements: All positions may require lifting and/or physical activities, including lifting of up to 75 lbs., walking/working on uneven surfaces, and driving to and from job sites. The majority of our work is conducted outdoors, in all weather conditions. Work hours vary, but include day, night and weekend shifts.

Building Design (MEP) Engineer CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Building Design Engineer for the Albany office. The Building Design Engineer is an Engineer-in-Training on the path to licensure with between 0-5 years of experience. The successful candidate should possess an Associate’s, Bachelor’s, or Master’s degree of Engineering. The candidate must have at least 1-3 years of Revit experience. This position is responsible for providing technical support in the development and design of engineered building systems. SPECIFIC DUTIES AND RESPONSIBILITIES: Under direction of Project Engineer, creates construction documents and document sets, including but not limited to plans, details, sections, schedules and legends. Guides the development of the work of others on some projects. Adheres to and implements firm-wide contract documentation procedures and standards. Takes field measurements and documents existing building conditions to develop or modify engineered systems for projects. Under the direction of the Project Engineer, recommends alterations to development and design to improve the design of projects, evaluates conventional system designs and writes technical specifications on projects. Under the direction of the Project Engineer, serves as an in-house project representative for building systems and assists the architectural staff in coordination of the architectural elements with building systems. Has knowledge of commonly used concepts, practices, and procedures within the field and relies on the Project Engineers instructions to perform the functions of a system design. Researches applicable codes and standards for use in the design of building systems and writes project documentation including O&M manuals. Assists Project Engineer and/or Project Architect during construction to process submittals and shop drawings. Evaluates equipment and systems submittals and determines if they meet contract specifications. Prepares submittals for return to Contractors. Makes calculations using engineering formulas and skills. Uses computer to run standard programs to solve engineering problems. REQUIREMENTS/QUALIFICATIONS: Licensure Requirements: Unlicensed (expectation of pursuing professional licensure) Education Requirements: Associate’s, Bachelor’s, or Master’s degree of Engineering and/or Engineer-in-training (EIT) registration. Experience: Minimum 0-2 years of experience (Summer Internships or 1-2 years experience preferred). Recent college graduate should have good to excellent drafting skills and ability to carry out job responsibilities with close guidance. Computer Skills: Revit- minimum of 1-3 years experience and other design/presentation software programs; 3-D software Excellent written, verbal and visual communication skills Detail oriented, highly organized, self-motivated, accurate, work well under pressure, ability to follow directions and ask questions. 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

Reality Labs at Meta is building products that make it easier for people to connect with the ones they love most, enjoy top-notch, wire-free MR, and push the future of computing platforms. We are a team of world-class experts developing and shipping products at the intersection of hardware, software and content. As a Realtime Engine Technology engineer at Meta, you can help build new, innovative hardware and software that radically redefine the way people work, play and connect. What we build today could one day be the norm. So to be here today is to truly be at the heart of change and the frontier of what's to come. We're the people helping to define the metaverse. We may not have all the answers. But together, we're getting closer. **Required Skills:** Software Engineer, Realtime Engine Technology - Reality Labs Responsibilities: 1. Develop efficient and reusable systems that drive complex realtime interactive software 2. Build technologies that empower developers to create compelling experiences 3. Optimize and debug real-time systems to ensure smooth performance 4. Set a high quality bar to make our technology easy and delightful for developers to use 5. Engage in deep collaboration with partner teams to drive successful product outcomes **Minimum Qualifications:** Minimum Qualifications: 6. Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. 7. 5+ years experience as an engineer developing features within 3D real-time interactive products 8. 5+ years experience with systems programming languages such as C++, Rust, or similar languages 9. Proven problem-solving skills and experience working independently and collaboratively 10. Effective communication and interpersonal skills **Preferred Qualifications:** Preferred Qualifications: 11. Experience building engine-level systems for 3D real-time interactive engines (Unity 3D, Unreal, Frostbite, or other/proprietary) 12. Experience building for virtual reality (Rift, Quest, VIVE, Valve Index, etc.) or mixed/augmented reality (HoloLens, Magic Leap, ARKit, ARCore etc.) 13. Experience developing SDKs or shared technology that balances the needs of multiple shipping products 14. Experience with performance optimization of real-time applications (CPU, GPU, Memory, etc. ) 15. Deep understanding of one or more real-time engine components ( Rendering, Collision, Physics, Input Processing, Audio, Animation, Networking, etc.) 16. Strong understanding of 3D math, linear algebra and physics **Public Compensation:** $70.67/hour to $208,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Come and join our powerful, unified force with the energy to change the world. Our mission is BIG. Our TRANSFORMATION is key - bringing the right businesses together to LEAD the ENERGY TRANSITION. Our TEAM is ready. The Onshore Wind Engineering Technician role is a hands-on, in-person operational support role located in Schenectady, NY. The successful candidate will learn how to demonstrate proficiency in maintaining and managing assembly tools with the proper function, calibration, and upkeep. This tooling is used in the assembly of wind turbines, guaranteeing operational safety and efficiency in the GE's world class 6MW+ onshore wind turbine factory. **Job Description** **Essential Responsibilities:** + Be responsible for preventive and corrective maintenance on hydraulic, pneumatic, electric, and manual tools/equipment. + Conduct periodic calibrations according to manufacturer specifications and internal standards. + Diagnose faults in torque tools and carry out repairs or forward them to specialized service centers. + Manage the inventory of torque tools (check-in, check-out, usage, maintenance, and disposal). + Track the life cycle of equipment and issue performance and condition reports. + Ensure proper storage and readiness of all tools in compliance with safety and operational standards. + Test torque tools and validate accuracy before dispatching them to field teams. + Assist in training operators on the safe and correct use of torque equipment + Maintain accurate records of inspections, calibrations, and maintenance (manual or via CMMS system). + Issue calibration certificates, inspection reports, and technical assessments as required by audits or quality standards. + Support Manufacturing Engineers in their activities related to the assembly process. **Qualifications/Requirements:** + High School Diploma/GED + Currently pursuing a degree in a technical program or relevant apprenticeship **Desired Characteristics:** + Manufacturing Experience + Strong grasp of physics, mathematics, hydraulics, computer & programming skills, six sigma methodologies, electrical & mechanical diagnostic techniques, safety, and environmental concerns. + Proficiency in the use of computer systems and current office suite programs i.e. Microsoft Word, Excel, and Access. + Effective written and verbal communication skills. + Ability and willingness to work nights and weekends as required. + Strong safety focus + Technical accuracy and attention to detail + Proactivity and problem-solving skills + Teamwork + Commitment to deadlines and quality **ABOUT US** **Inclusion & Diversity** At GE, we believe in the value of your unique identity, background and experiences. We are committed to fostering an **inclusive** **culture** , where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: ************************************************** **For U.S. based candidates only,** for purposes of complying with U.S. pay transparency requirements, the base pay range for this position is $1,035.34 - $1,466.42 USD Weekly The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position will stay open on the career website until at least 6/19/2025 **Benefits Available to You:** GE employees rise to the challenge of building a world that works. In order to meet this mission, we provide varied, competitive benefits to help support our workforce: Our Culture | GE Vernova (gecareers.com) (********************************************************* + Our **compensation & benefits** are designed to help you manage your personal and family needs, while rewarding high performers. We offer a robust benefits package depending on your employment status and your national requirements. + A **healthy, balanced lifestyle** can mean different things to different people. We've created programs that support the way you live and work today. + GE invests to provide opportunities to **grow your career** by providing a path for continued on-the-job **learning and development** . **Healthcare benefit** s include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. **Retirement benefits** include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. **Other benefits** include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **About GE Vernova Gas Power** GE Vernova's Gas Power business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. It is a global leader in gas turbines and power plant technologies and services with the industry's largest installed base. **Additional Information** GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Department/Unit: AMHS - Clinical Engineering Work Shift: Day (United States of America) Salary Range: $60,367.47 - $90,551.20 The Clinical Engineering Technician provides onsite and remote support for all medical equipment and systems and in person support needs. The Clinical Engineering Technician will take ownership of issues escalated to them and work to resolution utilizing all skills, experience, training, documentation and resources at their disposal. The Clinical Engineering Technician escalates and notifies employees appropriately according to documented standard operating procedures. The Clinical Engineering Technician is responsible for an exemplary customer service experience for all Albany Med employees during their interaction with Clinical Engineering. The Clinical Engineering Technician acts as a liaison between the customers and Information Services to resolve any issue that is reported, and will fulfill any project based or new requests that are assigned to them in the documented timelines. Essential Duties and Responsibilities * Respond to problems called in and repair the malfunctioning equipment in a timely manner, while resolving the root cause issue rather than the symptom of the issue * Provide support with medical device troubleshooting, configuration and diagnostic tools * Support enterprise future business growth and the movement and/or expansion of enterprise units * Excel at providing customer service in all verbal and written interactions with users * Work as part of a team to meet goals set forth by Information Services management * Meet or exceeds documented and communicated statistical metrics that drive overall departmental performance * Take ownership of issue and incident resolution * Provide all support actions that assist in the betterment of the end user experience of the Albany Med community * This position will provide guidance to the Clinical Engineering and Radiology Engineering Technician - Level I and II positions, as well as train new Clinical Engineering Technician - Levels I and II on their job responsibilities. * High degree of contact internal and external to Albany Med including any user of any Albany Med medical device or system * Maintain current technical expertise in the rapidly changing technology of Albany Med * Use customer feedback as a basis for taking actions, which solve customer problems quickly and effectively * Provide best effort support for non-standard devices * Participate in on-call rotation and help troubleshoot customer issues * Perform at or above the Information Services performance standards * Fulfill department requirements in terms of providing work coverage and administration notification during periods of absence (personnel illness, vacation, education, etc.) * Recognize and identify potential areas where existing policies and procedures require change, or where new ones need to be developed, especially regarding future business expansion * Identify and evaluate support tools for potential implementation * Act as a liaison between customers and Information Services to resolve any issue with the end user experience * Maintain confidentiality by using and communicating information only as needed to perform one's duties * Complete other duties or assignments as designated by management Qualifications * Associate's Degree preferably in biomedical/clinical engineering or a related engineering, math, science, or technology field of study. - required * Bachelor's Degree - preferred * 4-6 years - required * Ability to fulfill installations, upgrades, testing, and/or support requests for medical devices and related systems - this includes knowledge of best practices. * Ability to apply medical device and system documentation to a scenario to troubleshoot and resolve a reported issue, as well as determine when new issues arise and escalate them appropriately. * Ability to communicate and participate in ad-hoc and non-standard requests. * Ability to be successful at project management of basic to moderately complex medical device related projects * Incorporates proper customer service standards into daily workflow and ensures that all interactions with Albany Med employees, both verbal and written, exceed the minimum. * Ability to document issues and escalate/notify others according to documented process. * Ability to adhere to documented process and documentation, but utilize knowledge, experience, and training to resolve issues that are not documented. * Ability to effectively recommend, document, communicate, implement, and sustain improvements in processes, procedures, and operations that improve the function of a medical device management program. * Demonstrated support experience and knowledge of electronics, medical device technology and the use of such technology in the course of patient care. * Functional knowledge of medical device testing and calibration technologies. * Basic knowledge of end use Information Technology. * Familiarity with HIPAA regulations, medical terminology, healthcare, or financial and billing processes is a plus. Physical Demands * Standing - Occasionally * Walking - Occasionally * Sitting - Constantly * Lifting - Rarely * Carrying - Rarely * Pushing - Rarely * Pulling - Rarely * Climbing - Rarely * Balancing - Rarely * Stooping - Rarely * Kneeling - Rarely * Crouching - Rarely * Crawling - Rarely * Reaching - Rarely * Handling - Occasionally * Grasping - Occasionally * Feeling - Rarely * Talking - Constantly * Hearing - Constantly * Repetitive Motions - Frequently * Eye/Hand/Foot Coordination - Frequently Working Conditions * Extreme cold - Rarely * Extreme heat - Rarely * Humidity - Rarely * Wet - Rarely * Noise - Occasionally * Hazards - Rarely * Temperature Change - Rarely * Atmospheric Conditions - Rarely * Vibration - Rarely Thank you for your interest in Albany Medical Center! Albany Medical Center is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a "need to know" and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Medical Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a "need to know" and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Project Engineer II- Licensed (Electrical) CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Project Engineer for the Albany office. The Project Engineer II has at least 5 years of experience as a Licensed Engineer (Electrical). The successful candidate should possess an Associate's, Bachelor's, or Master's degree of Engineering. The candidate must have at least 3 years of Revit experience. This position is primarily responsible for the technical engineering and production aspects of medium to large projects from conceptual design through construction closeout. SPECIFIC DUTIES AND RESPONSIBILITIES: Leads in-house building systems design / engineering team through development of design and construction documentation process. Could also provide Project Engineer support as part of a larger project team on larger projects. Develops and coordinates with all engineering disciplines and architecture team to produce construction documents. Involved in field investigations, detailed engineering design work and development of design computations. Oversees code compliance with applicable engineering codes, standards and guidelines. Informs, directs and trains engineers-in-training and less experienced project engineers relative to these. Develops and coordinates engineering technical specifications. Adheres to and implements corporate contract documentation procedures and standards as they best apply. Responsible for all engineering aspects of construction administration including but not limited to shop drawing/submittal review and coordination, attending project meetings, developing field reports, periodic monitoring of construction sites, interfacing with contractors and clients. Supports project management with development of staffing, fee, budget estimating and project scheduling. Ensures that Quality Control procedures are being met. Will supervise small engineering staff and could have significant client contact. REQUIREMENTS/QUALIFICATIONS: Licensure Requirements: Licensed Education Requirements: Associate's, Bachelor's, or Master's degree of Engineering in electrical engineering. Experience: Minimum 5 years experience as a Licensed Engineer Computer Skills: Revit- minimum of 3 years experience and other design/presentation software programs; MS Office proficient; use of Adobe products; Submittal Exchange Excellent written, verbal and visual communication skills Detail oriented; highly organized; self-motivated; able to exercise independent judgment, multi-task, delegate, plan, set goals, meet critical deadlines, be accurate, work under pressure; conflict resolution/negotiation skills; team building and leadership skills. 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

SummaryCome and join our powerful, unified force with the energy to change the world. Our mission is BIG. Our TRANSFORMATION is key - bringing the right businesses together to LEAD the ENERGY TRANSITION. Our TEAM is ready. The Onshore Wind Engineering Technician role is a hands-on, in-person operational support role located in Schenectady, NY. The successful candidate will learn how to demonstrate proficiency in maintaining and managing assembly tools with the proper function, calibration, and upkeep. This tooling is used in the assembly of wind turbines, guaranteeing operational safety and efficiency in the GE's world class 6MW+ onshore wind turbine factory.Job Description Essential Responsibilities: Be responsible for preventive and corrective maintenance on hydraulic, pneumatic, electric, and manual tools/equipment. Conduct periodic calibrations according to manufacturer specifications and internal standards. Diagnose faults in torque tools and carry out repairs or forward them to specialized service centers. Manage the inventory of torque tools (check-in, check-out, usage, maintenance, and disposal). Track the life cycle of equipment and issue performance and condition reports. Ensure proper storage and readiness of all tools in compliance with safety and operational standards. Test torque tools and validate accuracy before dispatching them to field teams. Assist in training operators on the safe and correct use of torque equipment Maintain accurate records of inspections, calibrations, and maintenance (manual or via CMMS system). Issue calibration certificates, inspection reports, and technical assessments as required by audits or quality standards. Support Manufacturing Engineers in their activities related to the assembly process. Qualifications/Requirements: High School Diploma/GED Currently pursuing a degree in a technical program or relevant apprenticeship Desired Characteristics: Manufacturing Experience Strong grasp of physics, mathematics, hydraulics, computer & programming skills, six sigma methodologies, electrical & mechanical diagnostic techniques, safety, and environmental concerns. Proficiency in the use of computer systems and current office suite programs i.e. Microsoft Word, Excel, and Access. Effective written and verbal communication skills. Ability and willingness to work nights and weekends as required. Strong safety focus Technical accuracy and attention to detail Proactivity and problem-solving skills Teamwork Commitment to deadlines and quality ABOUT US Inclusion & Diversity At GE, we believe in the value of your unique identity, background and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: ************************************************** For U.S. based candidates only, for purposes of complying with U.S. pay transparency requirements, the base pay range for this position is $1,035.34 - $1,466.42 USD Weekly The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position will stay open on the career website until at least 6/19/2025 Benefits Available to You: GE employees rise to the challenge of building a world that works. In order to meet this mission, we provide varied, competitive benefits to help support our workforce: Our Culture | GE Vernova (gecareers.com) Our compensation & benefits are designed to help you manage your personal and family needs, while rewarding high performers. We offer a robust benefits package depending on your employment status and your national requirements. A healthy, balanced lifestyle can mean different things to different people. We've created programs that support the way you live and work today. GE invests to provide opportunities to grow your career by providing a path for continued on-the-job learning and development. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. About GE Vernova Gas Power GE Vernova's Gas Power business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. It is a global leader in gas turbines and power plant technologies and services with the industry's largest installed base. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Department/Unit: AMHS - Clinical Engineering Work Shift: Day (United States of America) Salary Range: $60,367.47 - $90,551.20 The Clinical Engineering Technician provides onsite and remote support for all medical equipment and systems and in person support needs. The Clinical Engineering Technician will take ownership of issues escalated to them and work to resolution utilizing all skills, experience, training, documentation and resources at their disposal. The Clinical Engineering Technician escalates and notifies employees appropriately according to documented standard operating procedures. The Clinical Engineering Technician is responsible for an exemplary customer service experience for all Albany Med employees during their interaction with Clinical Engineering. The Clinical Engineering Technician acts as a liaison between the customers and Information Services to resolve any issue that is reported, and will fulfill any project based or new requests that are assigned to them in the documented timelines. Level III The individual will utilize their knowledge and experience in combination with departmental standard operating procedures, processes, documentation and training to resolve issues. The individual will receive moderate to little supervision and will have moderate latitude in decision making on resolving issue. The individual is expected to escalate issues that fall outside of their training and documentation for disposition by senior peers or management. The individual will have knowledge of and excel at providing customer service and ensure that all written and verbal interactions with users meet those standards. The individual will have exemplary personal work ethic and strive to work effectively and efficiently. Typical responsibilities include: Support * Respond to problems called in and repair the malfunctioning equipment in a timely manner, while resolving the root cause issue rather than the symptom of the issue * Provide support with medical device troubleshooting, configuration and diagnostic tools * Support enterprise future business growth and the movement and/or expansion of enterprise units * Excel at providing customer service in all verbal and written interactions with users * Work as part of a team to meet goals set forth by Information Technology management * Meet or exceeds documented and communicated statistical metrics that drive overall departmental performance * Take ownership of issue and incident resolution * Provide all support actions that assist in the betterment of the end user experience of the Albany Med community Supervision * This position will provide guidance to the Clinical Engineering and Radiology Engineering Technician - Level I and II positions, as well as train new Clinical Engineering Technician - Levels I and II on their job responsibilities. Contact with others * High degree of contact internal and external to Albany Med including any user of any Albany Med medical device or system Other * Maintain current technical expertise in the rapidly changing technology of Albany Med * Use customer feedback as a basis for taking actions, which solve customer problems quickly and effectively * Provide best effort support for non-standard devices * Participate in on-call rotation and help troubleshoot customer issues * Perform at or above the Information Technology performance standards * Fulfill department requirements in terms of providing work coverage and administration notification during periods of absence (personnel illness, vacation, education, etc.) * Recognize and identify potential areas where existing policies and procedures require change, or where new ones need to be developed, especially regarding future business expansion * Identify and evaluate support tools for potential implementation * Act as a liaison between customers and Information Technology to resolve any issue with the end user experience * Maintain confidentiality by using and communicating information only as needed to perform one's duties Complete other duties or assignments as designated by management Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a "need to know" and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.