Engineering associate jobs in Columbus, OH

Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. Coordination with Subs, vendors, suppliers, and Independence Construction project team. Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors. Coordinate and expedite materials and services for the job site, in conjunction with superintendent. Schedule and manage meetings throughout each phase of construction and preconstruction. Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports. Review and coordinate structural, architectural and MEP drawings throughout the project. Assist PM in the oversight and management of change management processes. Collect and analyze the trade contractor proposal for scope changes. Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work. Log the change management to the correct cost codes. Issue the subcontract change order upon approval of the change by Owner and PM. Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate. Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals. Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log. Coordinate all project meetings with PM and Superintendent prior to the start of project. Attend Owner / Architect / CM (Contractor) meetings. Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications. Assist the Superintendent and PM as requested in creating and updating the Master Schedule. Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program. Assist PM and Superintendent with Close-out process. Assist with the preliminary punch list process. Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? Bachelor's degree in construction management or engineering or equivalent combination of education and experience. 2-5 years of previous related experience is required Strong written and oral communication skills. Knowledge of budgeting and expense control. Able to write reports, and business correspondence. Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. Able to perform duties independently. Computer skills: Microsoft Office applications. Strong attention to detail.

Project Engineer - Water & Wastewater | Columbus, OH We are seeking a motivated Project Engineer to support the planning and execution of water and wastewater construction projects in the Columbus market. This role offers hands-on exposure to WWTPs, pump stations, utilities, and civil infrastructure, working closely with Project Managers, Superintendents, and field teams. Key Responsibilities Support planning, scheduling, and budgeting for water and wastewater projects Review drawings, specifications, and contracts for scope and compliance Prepare RFIs, submittals, material takeoffs, and project documentation Coordinate with subcontractors, vendors, and field crews to maintain schedules Track quantities, production, and costs to support project controls Assist with field operations, safety, quality, and issue resolution Participate in meetings with owners, inspectors, and project stakeholders Support project closeout including as-builts, O&M manuals, and punch lists Qualifications Bachelor's degree in Civil Engineering, Construction Management, or related field 1-4 years of experience in water/wastewater or heavy civil construction Ability to read and interpret civil, utility, and process drawings Proficiency with Bluebeam, AutoCAD, MS Office, and scheduling tools Strong communication, organization, and teamwork skills Safety-focused mindset What's Offered Competitive salary with clear career progression Full benefits package (health, dental, vision, retirement) Exposure to high-impact municipal water and wastewater projects Supportive, team-oriented environment focused on development and long-term growth

Who You Are: You're a dynamic problem-solver with a passion for construction. Detail-oriented and driven, you thrive in collaborative environments and excel at managing multiple responsibilities. You're ready to take on challenges head-on and contribute to meaningful projects that make a difference. The Opportunity: You'll play a vital role in managing construction processes and driving project success. This role offers dynamic work, opportunities for growth, and a chance to make a significant impact in the Water, Wastewater, Industrial, and Energy sectors. Who We Are: Our people are our strength. As an employee-owned national construction company, we prioritize collaboration, innovation, and continuous improvement. We're committed to fostering a culture of growth and empowerment, where every team member is valued and supported. What You'll Do: As a Project Engineer, you'll work closely with the Project Manager and Superintendent to manage all construction processes effectively. From scheduling to safety, your responsibilities will include: Implementing Bowen's SQP process Supporting Field Engineer duties to ensure project success Facilitating communication with stakeholders Streamlining purchasing processes and coordinating submittals Identifying and addressing potential issues proactively Participating in project status meetings and reporting on progress Contributing to site safety audits and upholding safety standards Assisting in project close-out activities and estimating project divisions Why You'll Love Working At Bowen: The Right Size: Large enough for great resources, small enough that you'll personally know our leadership and they'll know you. Hands-On Experience: Work directly with Craft, PMs, Superintendents, and Engineering Partners, seeing the work unfold daily. We self-perform, fostering teamwork rather than just managing subcontractors. Growth Opportunities: The sky's the limit if you're willing to work hard, be patient, and take initiative. We're committed to developing future leaders and invest in your growth. Safety First: "Zero Injury and Genuine Concern for Others." We don't do shortcuts. We've built a culture where teams are empowered to speak up and continuously improve safety. Build Unique Projects: Our strength lies in deep, heavy, complex work. The variety will challenge you and keep things exciting. Strong Support System: We provide the training and team you need. Besides on-the-job training, we offer annual and bi-annual sessions at corporate, ensuring you're surrounded by a strong support system. Hard Work, Big Rewards: The work is tough but incredibly rewarding. We believe in Celebrating Success and encourage you to use your PTO. Our company trips and close-knit teams foster lasting friendships. While construction means some travel, we do our best to keep you close to home and always have your back. Must-haves in a Candidate: Bachelor's degree in construction/engineering or equivalent technical training 2+ years of construction experience Strong communication and interpersonal skills Proficiency in computer applications Sound understanding of cost analysis principles Nice to Haves in a Candidate: Experience working with self-perform construction operations Experience with advanced scheduling techniques Knowledge of value engineering principles Familiarity with construction safety standards and procedures Additional Details: This position will support our Columbus, OH operation. Must be comfortable with potential travel throughout the week. Benefits: Competitive Base Salary Medical, Dental and Vision Insurance PTO from Day 1 7 Paid Holidays (plus 6 additional half-days), 1 Community Day, 1 Floating Holiday Paid Parental Leave Annual Discretionary Bonuses Car Allowance Employer-paid Life Insurance with supplemental options 401k with Company Match HSA and FSA options Employee Referral Program Wellness Program Employee Assistance Program (EAP) Short and Long-Term Disability Family Planning and Adoption Assistance Education Reimbursement

Acts as a liaison between leadership and team to ensure everyone is on the same page with a smooth flow of information, assists in preparation of reports, presentations, and documentation ensuring leadership has the necessary tools to make informed decisions that support team and company goals, supports company culture, and stays flexible by adjusting to shifting priorities or unexpected changes, making sure the team stays productive and aligned with company goals even in dynamic environments. * Confirm accuracy of well, cost, and production data, take appropriate action on any changes, and communicate required corrections to the necessary parties * Assist in preparation for submission of presentations * Build reports with various data sources as requested by division * Collect, build reports and/or visuals, and analyze data * Understand data sources, work flow, and functionality of internal apps to provide support for others in the division * Initiates and develops more accurate and reliable data analyses and reporting methodologies * Liaise with internal teams (Headquarters, IR, Operations, Engineering, Accounting, IS) * Responsible for crafting internal communication to convey a clear and concise message * Provides initial direction and continual communication to the division on objectives, expectations and timelines relating to projects, conferences, and presentations * Plan Summer Family Event, Holiday Party, and other activities that promote team building and morale boosts * Assist in Wellness Ambassador Activities such as Health Fair, Mental Health Day, etc. * Coordinate volunteer opportunities for the division * Evaluate and track charitable giving opportunities * Schedule and coordinate meetings, travel arrangements, and appointments * Design and order apparel and other handouts * Proficient in well data software and data analysis tools (WellView, Aries, Spotfire, Power BI) * Highly proficient in Microsoft Teams, PowerPoint, Excel, Outlook * Ability to multitask and prioritize in deadline-driven environment * Desire to improve and streamline processes and data quality department and organization * Basic understanding of oil and gas terminology and industry standards * Strong organization and time management, communication skills, attention to detail, problem solving, confidentiality and discretion, adaptability, data mining, building meaningful reports, relationship building, and project management Position will be filled a level commensurate with experience. EOG Resources is an Equal Opportunity Employer.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), **onsite** position with a competitive hourly pay rate and eligible for overtime pay. **This position will start May 2026 and go through Summer. Dates are flexible with school calendar.** Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Produce detailed layout and equipment details of HVAC systems, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements** : + Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), + Strong interest in Building Systems Mechanical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

Revive Environmental Technology, LLC ("Revive") is a mission-driven environmental technology company focused on delivering rapid, permanent solutions for PFAS and other persistent environmental contaminants. Our flagship PFAS Annihilator systems are built on patented supercritical water oxidation (SCWO) technology and are setting a new standard in liquid waste destruction, including PFAS-laden AFFF concentrates and complex organic waste streams. Position Overview We are seeking a Mechanical Engineer Intern or Co-Op to further develop and scale our PFAS Annihilator SCWO technology. The position is based in Columbus, OH. The role reports to the Chief Technology Officer. How an internship or Co-Op would be different with Revive than other companies is we give real world challenges to solve to each team member, interns and Co-Ops included. Your work would be on a project that has meaningful contribution to Revive as a growing young company, and the learning opportunities are fast paced and mission critical. Key Responsibilities for your projects could be: Engineering Design & System Development Design, prototype, and iterate mechanical components and subsystems for Annihilator systems and support equipment. Assist in the selection and specification of mechanical equipment including pumps, valves, fittings, and materials for high-temperature/high-pressure environments. Support assembly, fit-up, and testing of newly fabricated equipment; identify and resolve mechanical interferences and installation issues. Operations Support and Troubleshooting Collaborate closely with site operators, technicians, and engineers to support day-to-day operations of the SCWO systems. Investigate and resolve mechanical failures or equipment anomalies, conducting root cause analyses and implementing corrective actions. Develop and implement maintenance procedures, equipment setup guides, and operating protocols for mechanical systems. R&D and Process Optimization Collaborate with chemical/process engineers to translate theoretical concepts into testable mechanical solutions (e.g., injection hardware, quench systems, thermal shielding, brine handling). Analyze test results, identify trends, and recommend mechanical or operational changes to increase system uptime, throughput, or maintainability. Assist in designing and executing long-duration reliability tests to characterize mechanical component performance over time under SCWO-relevant conditions. Required Qualifications Knowledge and/or experience in process engineering design. Strong safety record and mindset. Experience with CAD modeling Excellent problem-solving and cross-disciplinary collaboration skills. GPA of a 3.0 or better Preferred Qualifications Prior coursework with a "B" or better grade in Thermodynamics and Fluids Experience / prior exposure to sensor and actuator selection and integration Industrial experience. Familiarity with PFAS chemistry. Background in thermal reaction systems, heat integration, and fluid mechanics. Experience with fabrication, manufacturing, and good lab practices. Why Join Revive Contribute directly to solving one of the most pressing environmental challenges of our time. Work alongside an agile, mission-driven team combining deep science with practical field engineering. Be at the center of scaling up one of the first proven PFAS destruction systems to national and international markets. Competitive compensation and growth opportunities in a fast-scaling cleantech company.

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Produce detailed layout and equipment details of HVAC systems, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), Strong interest in Building Systems Mechanical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. #LI-RH1 #LI-Onsite

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. At Amgen, if you feel like you're part of something bigger, it's because you are. Our shared mission-to serve patients living with serious illnesses-drives all that we do. Since 1980, we've helped pioneer the world of biotech in our fight against the world's toughest diseases. With our focus on four therapeutic areas -Oncology, Inflammation, General Medicine, and Rare Disease- we reach millions of patients each year. As a member of the Amgen team, you'll help make a lasting impact on the lives of patients as we research, manufacture, and deliver innovative medicines to help people live longer, fuller happier lives. Our award-winning culture is collaborative, innovative, and science based. If you have a passion for challenges and the opportunities that lay within them, you'll thrive as part of the Amgen team. Join us and transform the lives of patients while transforming your career. Associate Technical Engineer What you will do Let's do this. Let's change the world. In this role you will provide technical engineering support on all system/equipment optimization strategies, upgrades, replacements, repairs, and modifications. You will evaluate and determine if process equipment maintenance, and technical cleaning systems are maintained in compliance with all applicable industry standards, regulatory standards and FDA standards in the Inspection and Packaging area. Responsibilities: Take part in the coordination of tech support on engineering, regulatory, compliance, quality, microbial/environmental, technical cleaning, validation, and mechanical equipment issues. Assist during regulatory agency inspections. Provide technical support in response to the FDA and other regulatory agencies. Complete advanced maintenance activities or operate and monitor sophisticated plant support equipment in accordance with CFRs, cGMPs, SOPs, job plans and Amgen policies. Investigate complex issues or problems through the mentorship of experienced staff. Assist with maintaining an up-to-date working spare parts inventory system for the equipment/systems. Evaluate the current maintenance procedures and assist in the changes to optimize the maintenance program, trouble shoot and repair equipment/system failures. Interpret and review utility, process system/equipment, plumbing, ductwork plans, architectural, and P&IDs. Support Operations in non-standard shifts that includes weekends and/or holidays as determined by business. Additional Qualifications/Responsibilities What we expect of you We are all different, yet we all use our unique contributions to serve patients. The professional we seek will possess these qualifications. Basic Qualifications: Bachelor's degree OR Associate's degree and 4 years of Technical Engineering experience Or High school diploma / GED and 6 years of Technical Engineering experience Preferred Qualifications: Educational background in Mechanical Engineering, Mechatronics, or related technical degree Experience repairing mechanical equipment in a manufacturing environment (experience with packaging equipment preferred) Strong mechanical proficiency and trouble shooting skills Understanding in PLC, Computer Serialization, Packaging Equipment, Vision Inspection System (Cognex Vision System and Systech Serialization) Excellent organizational, project management, problem solving and technical writing capability Strong communication skills: verbal / written, collaboration, influencing and facilitation MS Office: Word, Excel, Power Point What you can expect of us As we work to develop treatments that take care of others, we also work to care for your professional and personal growth and well-being. From our competitive benefits to our collaborative culture, we'll support your journey every step of the way. The expected annual salary range for this role in the U.S. (excluding Puerto Rico) is posted. Actual salary will vary based on several factors including but not limited to, relevant skills, experience, and qualifications. In addition to the base salary, Amgen offers a Total Rewards Plan, based on eligibility, comprising of health and welfare plans for staff and eligible dependents, financial plans with opportunities to save towards retirement or other goals, work/life balance, and career development opportunities that may include: A comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts A discretionary annual bonus program, or for field sales representatives, a sales-based incentive plan Stock-based long-term incentives Award-winning time-off plans Flexible work models where possible. Refer to the Work Location Type in the job posting to see if this applies. Salary Range 74,535.00 USD - 88,257.00 USD

Own your future as an intern at Ecolab! Our internship program provides you with invaluable insights from leaders across Ecolab, engaging and challenging projects, opportunities for personal and professional growth, extensive networking, and the chance to immerse yourself in our innovative and dynamic environment. Ecolab is seeking Engineering Technical Sales Interns to join our summer 2026 technical sales internship program. You will help identify and propose solutions to preserve energy and water, minimize our customers' environmental footprint and increase productivity. You will combine a traditional engineering approach with a consultative sales approach focused on strong account leadership skills and retention of strategic accounts. You will also learn how to build long-term relationships with a large customer base by understanding their key business drivers, providing strategic resolution through hands-on problem solving, and offering new digital technology solutions. What's in it For You: * The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food and healthy environments * The ability to make an impact and shape your career with a company that is passionate about growth * The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best * Apply what you learn in the classroom to meaningful projects that have genuine business impact * Finish your internship with a realistic job preview of what a "day in the life" of an Ecolab associate looks like * Be considered for a full-time job offer (to start upon graduation) at the end of a successful internship into an Associate District Representative role. What You Will Do: * Complete an independent project(s) under primary trainer's direction to yield calculated ROI * Complete safety training & technical lessons that serve as an introduction to water treatment applications * Observe and participate in service as it is provided to customers to assure accurate chemical application, process optimization and documentation * Complete introductory training of the consultative sales approach * Visit multiple customer sites across the region (40-100% of training time spent in field) to learn best practices and types of unit applications and treatment approaches * Build key relationships and interaction with departments and personnel that will be critical to success in the field * Work within various regional sales districts and customer locations to build specific technical knowledge and gain sales experience while helping customers achieve their sustainability goals. * Provide routine service support to Sales Representative. May be subject to testing includes Boilers, Cooling towers, Closed loops, R.O. and filtration. Position Details: * 11-week paid internship program, starting on Monday, June 1st * Willing to relocate within the United States. Nationwide locations available * Relocation assistance may be available * Opportunity for a hybrid work environment, balancing field days with working remotely Minimum Qualifications: * Pursuing undergraduate degree in Engineering (Chemical, Mechanical, Environmental, Industrial) graduating in December 2026 or Summer 2027 * Immigration sponsorship not available for this role * 11-week paid internship program, starting on Monday, June 1st * Position requires a valid US Driver's License and acceptable motor vehicle record and access to a personal vehicle Physical Demands: * Position requires lifting/pushing/carrying up to 50 pounds chest high About Ecolab A trusted partner at nearly three million customer locations spanning over 170 countries, Ecolab is the global leader in water, hygiene and infection prevention solutions and services. Our team delivers comprehensive solutions, data-driven insights and personalized service to advance food safety, maintain clean and safe environments, optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, hospitality and industrial markets. When you come to work at Ecolab, you get to take on some of the world's most meaningful challenges and have the opportunity to learn and grow, shape your career, make an impact and quickly see the importance of your work. Annual or Hourly Compensation Range: $23.00 - $25.00 per hour. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: * Undergo additional background screens and/or drug/alcohol testing for customer credentialing. * Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

Intern - Manufacturing Engineering (Summer 2026) Allied Mineral Products is a leading manufacturer of monolithic refractories worldwide, headquartered in Columbus, Ohio. We are currently seeking an Intern - Manufacturing Engineering (Summer 2026). This role will support the Plant Engineering team in identifying and implementing improvements to manufacturing processes, equipment, and systems. The role is designed to provide hands-on experience in a manufacturing environment, with exposure to project work, equipment troubleshooting, and process optimization. Additional duties may be assigned to support departmental goals. Key Duties and Responsibilities: Assist in identifying opportunities for process improvement using lean manufacturing principles. Support data collection and analysis for root cause investigations and improvement initiatives. Help update mechanical or electrical drawings using AutoCAD or similar software (training provided). Participate in project planning and implementation under the guidance of engineering staff. Learn and implement project management, reliability, and electrical and control system basics. Assist in preparing specifications for equipment, materials, and services. Troubleshoot manufacturing and facilities equipment, either mechanical or electrical, including sensors, switches, relays, PLCs, variable drives and motors. Attend team and project meetings to gather updates and contribute to discussions. Qualifications: Must be enrolled in an accredited university or college pursuing a degree in mechanical, electrical, or manufacturing Engineering or related discipline. Must be at least Sophomore status. Must have a minimum 2.5 Cumulative GPA (student will be required to provide a current transcript). Must be available to work at least 40 hours per week for at least 12 weeks. Must be legally authorized to work in the U.S. without sponsorship. Strong interest in manufacturing operations and process improvement. Dependable and punctual with strong organizational and time management skills. Demonstrate excellent verbal and written communication skills. Proficient in Microsoft Office; familiarity with CAD software is a plus. Ability to follow instructions and work independently or in a team setting. Work Environment: Office and manufacturing plant environment. 100% onsite. Frequent exposure to Allied's manufacturing facilities, which may include dusty, hot, or cold conditions. Required to follow Allied Mineral Products' Safety & Health policy and wear Personal Protective Equipment (PPE) as appropriate. Flexible 40-hour work week. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

Job Posting End Date 01-04-2026 Please note the job posting will close on the day before the posting end date. The power of AEP comes from our valued team of unique employees….the best in the business! We're proud to be one of the largest electric energy companies in the U.S., powering over 5 million homes and businesses, spanning across 11 states. We're passionate about making an innovative difference in the communities we serve. We're powering the future - today! Join our team where you'll make an impact while contributing to the development and implementation of the systems and infrastructure needed to efficiently deliver energy services to our valued customers. What You'll Do: This position will be responsible to the assigned supervisor for performing engineering work activities and projects requiring the application of engineering knowledge in a safe, effective, efficient and economic accomplishment of assigned objectives. The overall purpose of this position is to provide engineering expertise to plan, implement, and maintain distribution automation control schemes utilizing the latest technology in deployment of grid modernization technology. This includes Distribution Automation Circuit Reconfiguration (DACR), Volt VAR Optimization (VVO), Distributed Energy Resources (DERs), and Sensors Job Description What you'll do: * These positions will perform the logical programming and focus on optimizing performance of the distribution system in conjunction with AEP Distribution Engineers and System Planning Engineers. Grid Management investments are expected to grow rapidly as the transformation to a more modern grid ramps up over the next several years. * This position will engage with other groups centrally at AEP Service Corp and with core groups at the Operating Companies. There will be interaction with multiple teams throughout AEP, which include, but are not limited to Telecom, SCADA, Station Engineering, Distribution Dispatch, Distribution Reliability, Distribution Planning, management and a wide range of field personnel. Distribution automation control schemes utilize the latest technology and result in higher reliability, lower cost, and energy efficient use of the distribution system. * Distribution automation controllers require programming, check out of the programming, on-going maintenance of the programming as circuit topography changes and emergency maintenance if the system is not performing properly. * The successful candidate should possess good written and oral communications skills, be able to work in self-directed environments, possess strong leadership skills, be willing to work in integrated, cross functional teams, be flexible to and supportive of change, be able to multi-task, be willing to travel when needed, be available for support calls sometimes after normal work hours, and be an advocate for grid modernization deployments. Primary Responsibilities * Work with the teams in AEP to engineer and implement distribution automation control schemes for DACR; also known more commonly as FLISR - Fault Location Isolation and Service Restoration · * Work with the teams in AEP to engineer and implement Volt Var Optimization schemes for VVO · * Develop configurations and programming for remote terminal units (RTUs) for grid modernization equipment integration into SCADA. * Work with operating company engineering, construction, and operation's groups to select and install optimum equipment to implement grid modernization technologies · * Develop, document, and maintain standards for grid modernization equipment, schemes, and architectures incorporating cyber secure designs · Coordinate point assignments, commissioning, testing, and maintenance of automation and SCADA systems with SCADA analysts and vendors · * Participate in industry associations (IEEE, EPRI, etc.) to interact with other industry leaders to be current on the latest grid modernization technologies that can be applied to the distribution system · * Work with vendors and Transmission and Distribution operations groups and engage in training to be current on the most effective use of technologies · Work with operating companies to develop the needed skilled workforce including training of existing employees and addition of new skilled employees to install, operate, and maintain grid modernization technologies · Complete safety training and utilize safe work practices in all work What we're looking for: Engineer Associate SG6 * This is an entry level position for new graduates with a Bachelor's degree in engineering in a program accredited by ABET*; * Passing the Fundamentals of Engineering examination in preparation for future licensing as a Professional Engineer (PE) is encouraged and preferred. Engineer Technologist SG6 * This is an entry level position for new graduates with a Bachelor's degree in engineering technology* in a program accredited by ABET.* A degree in engineering technology is the preferred degree: however, engineering degrees will also be considered. ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative is: * Bachelor's degree in engineering technology (non-ABET) plus a Master's degree or PhD in engineering technology from a university with an ABET accredited Bachelor's program. Engineer SG7 * Has typically acquired a Bachelor's degree in engineering in a program accredited by ABET* along with two or more years of related engineering experience. * Individuals with a Master's degree in engineering from an engineering program accredited by ABET* may be considered for entry into the organization at this level. * ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative is: * Bachelor's degree in engineering (non-ABET) plus a Master's degree or PhD in engineering from a university with an ABET accredited Bachelor's program Engineer Technologist SG7 * Has typically acquired 2 or more years of related experience in work activities and projects requiring the application of engineering technology principles; * Bachelor's degree in engineering technology* in a program accredited by ABET A degree in engineering technology is the preferred degree: however, engineering degrees will also be considered. ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative is (1) a Bachelor's degree in engineering technology (non-ABET) plus a Master's degree or PhD in engineering technology from a university with an ABET accredited Bachelor's program. Engineer Senior SG8 * Has typically acquired 4 or more years of related engineering experience along with a Bachelor's degree in engineering in a program accredited by ABET*; * Or 2 years of related engineering experience along with a Master's degree or PhD in engineering from a program accredited by ABET*; * Registration as a Professional Engineer (PE) in any U.S. state or Puerto Rico is encouraged and preferred.*ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative is: * Bachelor's degree in engineering (non-ABET) plus a Master's degree or PhD in engineering from a university with an ABET accredited Bachelor's program. Confirmation is required to ensure the PE obtained in Puerto Rico aligns with NCEES standards. Engineer Technologist Senior SG8 * Has typically acquired 4 or more years of related experience in work activities and projects requiring the application of engineering technology principles; * Bachelor's degree in engineering technology* in a program accredited by ABET. * A degree in engineering technology is the preferred degree: however, engineering degrees will also be considered. ABET - Engineering Accreditation Commission of the Accreditation Board for Engineering and Technology. Acceptable alternative: * Bachelor's degree in engineering technology (non-ABET) plus a Master's degree or PhD in engineering technology from a university with an ABET accredited Bachelor's program. * VP or above may waive the requirement for a degree from a university with an Non ABET accredited program In addition: * Electrical Engineer or Electrical Engineer Technologist degrees are preferred. Where you'll work: This role sits on site in New Albany, Ohio. What you'll get: Engineer /Engineer Technologist SG6/SG7($82,000 - $105,000) Engineer Senior/ Engineering Technologist Senior SG8 ($96,110- $124,940) The power of AEP comes from our valued team of unique employees….the best in the business! We're proud to be one of the largest electric energy companies in the U.S., powering over 5 million homes and businesses, spanning across 11 states. We're passionate about making an innovative difference in the communities we serve. We're powering the future - today! In addition to competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. American Electric Power (On-Site) $82- $125K/Year #LI-Onsite #AEPCareers #engineer #engineertechnologist Compensation Data Compensation Grade: SP20-006 Compensation Range: $72,380.00 - $124,940.00 The Physical Demand Level for this job is: S - Sedentary Work: Exerting up to 10 pounds of force occasionally (Occasionally: activity or condition exists up to 1/3 of the time) and/or a negligible amount of force frequently. (Frequently: activity or condition exists from 1/3 to 2/3 of the time) to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time but may involve walking or standing for brief periods of time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Forge Your Future with Us: At Forge Biologics, we believe in turning bold ideas into life-changing realities. Our mission is simple yet powerful: to enable access to life-changing gene therapies and help bring them from ideas into reality. We partner with scientists, physicians, biotech and pharma innovators, and patient communities - all united by one goal: improving lives. If you're driven by purpose and excited to make a tangible impact, this is where your journey begins. Our team works out of The Hearth, a state-of-the-art, 200,000-square-foot cGMP facility in Columbus, Ohio. Here, you won't just watch innovation happen - you'll be part of it. Whether you're scaling AAV manufacturing, collaborating on cutting-edge therapies, or supporting complex technical projects, you'll play a key role in bringing hope to patients with genetic diseases. What sets Forge apart is our culture of H.O.P.E. We are hardworking, showing up each day with determination and grit. We are open, creating a space where ideas flow freely and every voice is valued. We are purpose-driven, with every task directly tied to changing lives. And we are engaged, energized by the challenges we face and the milestones we achieve together. At Forge, your growth matters. We're committed to helping you expand your skills, take on new challenges, and develop your career through mentorship, hands-on learning, and opportunities for advancement. Our people are our greatest investment, and we're proud to see team members grow with us. If you're ready to use your talent to help deliver hope to patients around the world, join us - and be part of something bigger than yourself. About The Role: Forge Biologics is seeking an AAV Manufacturing Summer Intern to join our 2026 Ignite Internship Program. In this role, you will have the opportunity to be trained on the bioprocessing manufacturing processes by industry leaders, contribute to the execution of manufacturing life-changing gene therapies for human use, and provide hands-on support for new technologies and systems in our GMP manufacturing facility. You will also gain experience in the clean room environment, utilize automation, and identify areas for efficiency improvements. What you'll do: * You will learn how to optimize biological processes, utilize bioreactors and chromatography systems, and gain exposure to automation in the clean room environment. * You will gain hands-on experience within the biotech industry including upstream (cell culture and virus production), downstream (harvest and purification), and fill finish techniques. * You will execute procedures assuring quality, safety, efficacy, and purity of drug products. What you'll bring: * Incoming junior or senior for Summer 2026, currently enrolled in a full-time bachelor's degree program at an accredited college or university. * Minimum 3.0 GPA or equivalent. * You are studying biology, life sciences, chemistry, engineering, or a related field. * You are a self-starter, detail-oriented, collaborative, and organized. * You have experience following detailed instructions in the laboratory or work environment. * You are inquisitive, like to solve problems, and identify areas for process improvement. Why you'll love it: * You'll work on meaningful and relevant projects while gaining experience in the biotech industry. * You will develop professionally through bi-weekly intern programming including networking with Forge leaders, career management workshops, and exclusive intern community events. * You will be mentored by Forge department leaders and supported through a network of Forge employees. Forge Biologics Ignite Internship Program is designed to provide meaningful experiences in a professional environment while giving our interns the experience to network with Senior Leadership and peers through a variety of activities and events. During the Summer Internship Program, you will work on real business issues/projects and learn from industry leaders. Our interns will work onsite at our offices in Grove City, OH (just 15 minutes from downtown Columbus, Ohio). Duration: The 2026 intern program runs for 12 weeks, from May 18 - August 7. Please Note: Forge Biologics does not provide housing or relocation stipends for non-local interns. Candidates are responsible for securing their own housing and transportation for the duration of the internship. Work Environment and Physical Demands This position works in both a laboratory environment and typical office environment where the physical work demands will vary depending on the specific tasks and duties required of the job. The employee will be stationary (standing/sitting) for extended periods of time. Employees regularly wear personal protective equipment based on the task being performed. Must be able to work in a confined space, such as a clean room or laboratory environment. Ability to identify small details within the field of vision, distinguish between different colors, and accurately identify objects within a specific area. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned. Forge Biologics is an equal opportunity employer dedicated to building an inclusive and diverse workforce. Forge Biologics, provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Business Unit: Design Team Packaging Group Employment Type: Contract Duration: 1+ years (with possible extensions) Rate: $27 - $30/hour W2 Notes: Onsite but can work from home occasionally. 3 Key Consulting is recruiting an Associate Engineer, Packaging for a consulting engagement with our direct client, a leading global biotechnology company. We are looking for a packaging engineer and experience with Adobe Illustrator for making templates for packaging components. Job Description: This position reports into the Packaging Engineering group under Combination Product Operations (CPO) in Thousand Oaks, CA (ATO). This position will apply engineering principles to execute the proper design, qualification and implementation of Primary and Secondary Packaging components and the associated systems such as documentation, equipment, and processes. Knowledge of primary and secondary packaging systems and material science is essential to the position. The position requires organizational, project management, technical problem solving and communication (written and verbal) skills, and the ability to work in teams and adapt to a rapidly changing environment. Top Must Have Skill Sets: Ability to use Adobe Illustrator Software to create technical templates based on packaging specification drawings. Experience with or familiarity of Packaging Engineering job function Demonstration of being proactive and have the ability to multi-task (see red flags also) Day to Day Responsibilities: Support for testing and evaluation leading to recommendation and selection of primary and secondary packaging materials. Familiarity with Material Testing standards, requirements and equipment is essential. Writing of test protocols, perform technical evaluations and testing to support reports used to justify the use of selected materials and packaging components. Writing technical specifications, creating engineering drawings, and developing artwork templates. Competent with AutoCAD and Illustrator, or similar software application to create, modify and approve engineering drawings. Support line trials and packaging validation activities prior to introduction of any new or change in components/processes. Collaborate with cross-functional teams (i.e. Quality, Device Engineering, Supply Chain, Artwork, Manufacturing, Regulatory, etc.) in pre-commercial and commercial activities. Basic Qualifications: Independent thinker with demonstrated skills working in teams or leading project teams Strong Interpersonal and communication skills Bachelor degree OR Associate degree and 4 years of experience. Preferred Qualifications: MS or BS Packaging, Mechanical Engineering, Chemical Engineering, Life Sciences or related field 0 to 3 years general packaging/engineering experience Why is the Position Open? Supplement additional workload on team Red Flags: Not familiar with client or what we do (Can the candidate name a client product and understand what it is used to treat?) No understanding of what Packaging Engineers do Lack of motivation No Adobe experience Interview Process: WebEx Video Call - Will be screened by team member and then the hiring manager We invite qualified candidates to send your resume to *****************************. If you decide that you're not interested in pursuing this particular position, please feel free to take a look at the other positions on our website ******************************* You are also welcome to share this opportunity with anyone you think might be interested in applying for this role. Regards, 3KC Talent Acquisition Team

This is your chance to change the path of your career and guide multiple teams to success at one of the world's leading financial institutions. As a Manager of Software Engineering at JPMorgan Chase within the Consumer and Community Branch workplace technology team, you lead multiple teams and manage day-to-day implementation activities by identifying and escalating issues and ensuring your team's work adheres to compliance standards, business requirements, and tactical best practices. Job responsibilities Provides guidance to immediate team of software engineers on daily tasks and activities Sets the overall guidance and expectations for team output, practices, and collaboration Anticipates dependencies with other teams to deliver products and applications in line with business requirements Manages stakeholder relationships and the team's work in accordance with compliance standards, service level agreements, and business requirements Creates a culture of diversity, opportunity, inclusion, and respect for the team members and prioritizes diverse representation Required qualifications, capabilities, and skills Formal training or certification on software engineering concepts and 5+ years applied experience. In addition, demonstrated coaching and mentoring experience. Experience leading technology projects and managing technologists Ability to design and architect new applications utilizing leading edge technologies Expertise in application, data and infrastructure architecture disciplines Proficient in all aspects of the Software Development Life Cycle Proficiency in multiple modern programming languages/platforms, such as: Java, Spring Boot, Photon, React or TypeScript, SQL, Restful Microservice, AWS, Kubernetes, and Postgres. 5+ years of hands on experience as a software engineer with focus on modern Agile software delivery practices such as Scrum, CI/CD Jenkins and BDD, and DevOps Prior experience with Spring Framework, Spring Boot, and Web Services Recent experience with a cloud platform (such as Pivotal Cloud Foundry/AWS) or container technologies such as Docker and Kubernetes Experience in Computer Science, Engineering, Mathematics, or a related field and expertise in technology disciplines Preferred qualifications, capabilities, and skills Experience with AWS cloud is a plus Demonstrated proficiency in software applications and technical processes within a technical discipline (e.g., artificial intelligence, machine learning, IOT, mobile, etc.) is plus In-depth knowledge of the financial services industry, consumer banking products and their IT systems Prior experience with JPMC enterprise frameworks, tools and controls preferred

Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the Midwest. We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! Detailed Description: How Will You Make an Impact?: Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with people managers, project managers, engineers, scientists, and multidisciplinary teams to support projects in water, wastewater, drinking water, environmental engineering, design, sustainability, climate mitigation, and more. * Assist in the preparation of technical deliverables including but not limited to calculations, reports, drawings, specifications, and memoranda. * Potential to participate in field work and site visits to support project design, construction, and data collection activities. * Perform data entry, analysis, and visualization to support engineering and scientific evaluations. * Ensure quality and accuracy by adhering to Brown and Caldwell's QA/QC processes and standards. * Communicate effectively with internal teams and external clients to coordinate project tasks and deliverables. * Support engineering services during construction by reviewing submittals, conducting inspections, and verifying conformance with plans and specifications. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in Environmental, Civil, Mechanical, Structural, Electrical, Chemical Engineering or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act #Intern26

Engineering Technician I - Columbus, OH Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a n Engineering Technician I to join our Electrical team in Columbus, OH. This is a fantastic opportunity to grow a versatile career in Electrical team. Intertek's Electrical business line applies more than 100 years of product testing expertise to quickly and efficiently help clients meet safety, performance, environmental and quality requirements for every market. Spanning a wide range of industries such as Medical, Lighting, Renewable Energy, HVACR, Appliances & Electronics, Hazardous Locations, Industrial Equipment, Life Safety & Security, IT & Telecom Equipment, Intertek's global network of laboratories employ world-class experts in their fields who deliver quality, accurate testing and certification that continually exceeds our clients' expectations and helps to clear a path for their product's success. We go beyond Testing, Inspection and Certification of products: we are a Total Quality Assurance Provider to industries worldwide. Intertek is continually innovating and evolving to reduce risk for consumers, brands, and organizations in every sector around the world. Our purpose: Bringing quality, safety, and sustainability to life. What are we looking for? The Engineering Technician I position is responsible for performing standard testing and evaluation on a variety of products and for preparing technical reports. This position works under general supervision. This position is not eligible for immigration sponsorship. Salary & Benefits Information Individual compensation packages are based on a variety of factors unique to each candidate including skill set, experience, qualifications, and other job-related reasons. In addition to competitive compensation packages, Intertek employees are eligible for a variety of benefits including paid time off (PTO), paid holidays, paid parental leave, medical plan options, dental, vision, life, and disability insurance, a 401(k) plan with company matching, tuition reimbursement, and more. What you'll do: Set up test apparatus Perform basic analysis of test data and routine calculations Provide an exceptional customer experience to all customers throughout the onsite testing Interact with customers in a professional manner including appearance and attitude Diligent safety practices, knowledge of OSHA standards, and use of safety equipment as required by management Work closely with lead/ crew members and take direction to complete projects within certain policies and procedures Daily cleanup and maintenance of projects, work equipment, work site, vehicles and organize all tools and materials Perform site survey activities with a team Attend mandatory training sessions on new products, installation methodology, and safety Troubleshoot, test, repair, and service technical equipment This position outline is a general guideline and does not represent all encompassing details. The position assumes that the incumbent has both the mental and physical requirements to carry out the above defined duties. Minimum Requirements & Qualifications: High School Diploma or GED 0+ years of experience Ability to work in fast-paced, multi-tasking environment with shifting priorities and demanding deadlines Ability to use basic shop equipment and various hand tools Ability to review, understand, and convey technical information in an effective manner Ability to apply common-sense understanding to carry out simple one or two step instructions Must be detailed-oriented and able to effectively prioritize and organize workload, with efficient time management Ability to communicate and interact effectively in verbal and written formats Must be customer focused and quality driven Microsoft Office software expertise, including Word, Excel and Outlook Ability to travel, up to 15% A valid driver's license and reliable driving record Applicants will be required to complete an I-9 to verify their eligibility to work in the U.S. Applicants must reside in and be able to legally work in the United States. Preferred Requirements and Qualifications Trade school certification or associate degree in technical field 1+ year of relatable experience Intertek Total Quality Assured Intertek is a world leader in the Quality Assurance market, with a proven, high-quality business model and a global network of customer-focused operations and highly engaged subject matter experts. With passion, pace, and precision we work to exceed our customers' expectations, while engaging with our employees to be 10X in their performance and professional growth. Intertek is a drug-free workplace. For certain safety-sensitive roles, a pre-employment drug screen will be required. Based on local law and legislation, marijuana may be included in that screening. Intertek is a drug-free workplace. As a condition of employment, certain positions may be required to pass a pre-employment drug test based on the type of work that will be performed. We Value Diversity Intertek's network of phenomenal people are our greatest assets, and the diversity they bring fuels our success. Intertek is an Equal Employment Opportunity Employer that values inclusion and diversity. We take affirmative action to ensure all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other legally protected characteristics. For individuals with disabilities who would like to request accommodation, or who need assistance applying, please email ******************* or call ************** (option #5) to speak with a member of the HR Department. #LI-DNP * Intertek does not accept unsolicited approaches from agencies and will not pay a fee for any placement resulting from the receipt of an unsolicited resume.Intertek is a leading Total Quality Assurance provider to industries worldwide. Our network of more than 1,000 laboratories and offices in more than 100 countries, delivers innovative and bespoke Assurance, Testing, Inspection and Certification (ATIC) solutions for our customers' operations and supply chains. Working at Intertek means joining a global network of state-of-the-art facilities and passionate people who deliver superior customer service with a purpose of bringing quality, safety, and sustainability to life.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose In this role you will be responsible for the design and maturation of HVAC components as you work with a group of supportive and experienced engineers in a fast paced, continuous learning environment. As an associate within the Interior Development Division, you will be responsible for exceeding customer's expectations by contributing to their “fun to drive” experience, as your designs will contribute to the customer's comfort each time they drive. Key Accountabilities Responsible for, and able to clearly convey, part design details (customer usability, assembly, material, texture, maintenance, tooling technical requirements, etc.) Setting vehicle targets and achievement methods Collaboration, communication and negotiation with other design groups, manufacturing, Styling, and suppliers to ensure the vehicle image can be met while meeting all regulations and part technical requirements Creation of detailed layouts (2D), basic part data (3D) and drawings Manage part cost and investment throughout development to ensure program targets are being met Problem Solving to address part concerns Hands on activity -communicating design ideas using VR or mock-ups Schedule and milestone management, including part testing and validation activities Qualifications, Experience, and Skills Minimum Educational Qualifications: Bachelor's degree in Mechanical, Aeronautical, Automotive Engineering or Industrial Design Minimum Experience: 0-2 years of relevant experience Other Job-Specific Skills: Past experience with CAD software (Catia V5 or V6 preferred) MS Office proficiency (Outlook, Teams, Powerpoint, Excel, etc.) Organization and communication skills Ability to travel and work overtime as needed Working Conditions Primary working location is seated at a desk Limited lifting of parts and part dunnage maybe required on occasion Overtime required as necessary to achieve program deliverables What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Relocation assistance (if eligible) Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development programs Additional Offerings: Tuition Assistance & Student Loan Repayment Lifestyle Account Childcare Reimbursement Account Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Job Description T&M Associates is a leading engineering and technical services firm focused on innovative solutions that advance our clients' goals and sustain communities. With nearly 60 years of experience, we specialize in five key markets: Buildings and Facilities, Community and Land Development, Environmental, Transportation, and Water. Our team of technical experts and consultants consistently demonstrate success in achieving positive outcomes for our clients nationwide. Headquartered in the Northeast region, and with offices strategically located throughout the country, T&M combines solid industry expertise, a commitment to sustainability, and a successful history of results. We are now accepting resumes for Summer 2026 internships. Opportunities are available in various engineering disciplines such as civil, environmental, water resources, transportation, mechanical, and electrical engineering. Additionally, internships are offered in planning, IT, human resources, marketing, and office services. These internships are open to current undergraduate students from freshmen through juniors who are pursuing careers in fields related to our industry. Positions are available at various T&M office locations and typically run from late May through August. Please note that in-person attendance at our office locations is required for this position. Specific schedules will be discussed and decided prior to your internship. Ideal candidates should meet the following criteria: Enrolled in a Bachelor's degree program. Previous internship experience is advantageous. Proficiency in Microsoft Office (Word, Excel, PowerPoint) is required. Demonstrates a professional demeanor, appearance, and attitude. Strong analytical, interpersonal, writing, and verbal communication skills. For engineering-specific internships: Pursuing a degree in Engineering or a closely related field. Experience with AutoCAD, Civil 3D, and Microsoft Office is preferred. T&M Associates is committed to pay transparency and equitable compensation practices in compliance with applicable laws, including the New Jersey Equal Pay Act. T&M estimates that the salary range for this position will fall between $20 - $23/hr. New hires must provide documentation proving eligibility to work in the United States. We are an Equal Opportunity/Affirmative Action Employer.

As an intern at Medforall Research and Development Center (MRDC) in Columbus, Ohio you will work with a team of researchers and engineers to develop new technologies for Medforall's world class assistive technoloy services.