Engineering associate jobs in Gulfport, MS - 47 jobs

Atlas Web Technologies - a Division of Atlas Roofing Corporation - focuses on the development and manufacture of state-of-the-art substrate product solutions for the building, construction, lamination, and original equipment management (OEM) industries. The solutions are derived from the three primary technologies: recycled paper, coated non-wovens, and hybrids of these base technologies. Atlas Web Technologies products are suitable for everything from packaging to roofing underlayments, buildings to automobiles, furniture table pads to lamination. Atlas Roofing Corporation, a privately owned company, established in 1982, is an international and multi-divisional manufacturer of roofing, sheathing, facer, and insulation product solutions. Atlas Web Technologies is seeking a Divisional Manufacturing Engineer for the Meridian, Mississippi facility. Divisional Manufacturing Engineer Job Duties & Primary Responsibilities Provide hands-on technical leadership to multiple plant locations driving improvements in reliability, process control, and other pertinent KPI's. Create necessary CAD drawings for equipment layout, process control, fabrication and assembly of components. Familiar with pneumatic, hydraulic, steam, and boiler systems and controls. Must have exceptional operational knowledge of process equipment and the ability to make logical decisions concerning the operation, maintenance and modification of process equipment with minimal supervision. Experience with project management and implementation from the initial planning stages to completion on time and within budget. Develop project scopes, budgets, and timelines for capital and expense projects with input from stakeholders. Prepare project justifications and formal authorization requests for capital projects generally over $100,000. Commission new production equipment, controls, and processes, and monitor modifications and upgrades. Familiar with control loops and control strategies to support troubleshooting and optimization of existing controls and processes. Independently evaluates, selects and applies standard engineering techniques, procedures and criteria, using judgment in optimization of processes and products involving modifications to facilities, equipment, methods and materials. Where appropriate, select and supervise external contractors and consultants to ensure they meet the requirements for function, cost, timing, and quality. Works with process, quality, production, and manufacturing personnel to develop and implement process changes necessitated by new technology or improvements to current technologies. Make observations and take measurements directly, as well as collect and interpret data from other technical and operating staff involved to develop and implement process improvement. Works with maintenance departments to develop proactive maintenance procedures and programs for the facilities and process equipment. Travel 25% to the other two locations (Sylacauga, Alabama & Franklin, Ohio). Expected travel requirement is minimum of 30%, potentially higher during project implementations. Divisional Manufacturing Engineer Additional Required Skills & Qualifications: (include computer, language, mathematical, and analytical skills required) Advanced analytical skills and creativity in solving problems and troubleshooting. Excellent interpersonal and communication skills (written, verbal and presentation), with the ability to effectively work with various levels in a team environment Strong organizational skills to manage multiple short and long-term projects. Competent with Microsoft Office, AutoCAD, and Microsoft Project Familiar with Computerized Maintenance Management Systems (CMMS). Knowledge of Programmable Logic Controllers (PLCs) (ControlLogix/ RS logic) is preferred. Divisional Manufacturing Engineer Supervisory Responsibilities This position has no direct internal supervisory responsibilities. Supervises and directs outside contractors during the construction and commissioning phases of capital projects. Divisional Manufacturing Engineer (include Certificates, Licenses, or Registrations required) Bachelor's degree in mechanical or electrical engineering, or similar technical discipline. Minimum of ten (10) years' hands-on work experience in a manufacturing environment with a proven track record of measurable results. Demonstrated initiative and the ability to handle complex assignments and be proactive. Experience in building materials or paper manufacturing is preferred. Experience in process batching and coating technology is preferred. Total Compensation Atlas Roofing Corporation offers competitive compensation and vacation/holiday package as well as a comprehensive benefits program including Medical, Dental, Vision, Life/AD&D/LTD insurance, 401k and Medical & Dependent Care Spending Accounts. Atlas Roofing Corporation is an Equal Employment Opportunity Employer. No calls or agencies please.

Job Description At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. Our Terran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launch capacity. But that's just the start. Achieving commercial success with Terran R will unlock new opportunities to advance science, exploration, and innovation, pioneering progress that reaches beyond the known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across teams, shape decisions, and see your work come to life in record time. Relativity is a place where creativity and technical rigor go hand in hand, and your voice will help define the stories we're writing together. Now is a unique moment in time where it's early enough to leave your mark on the product, the process, and the culture, but far enough along that Terran R is tangible and picking up momentum. The most meaningful work of your career is waiting. Join us. About the Team: The Stennis Test team designs, builds, and operates Relativity's propulsion and stage test stands. Team members are hands-on with large-scale, complex systems including fully integrated engines and stage assemblies, pushing hardware to the limits and directly contributing to flight readiness. The work is fast-paced and highly operational, ideal for those with backgrounds in aviation, automotive, manufacturing, offshore operations, industrial systems, construction, or adjacent industries. You'll work in a close-knit, dynamic environment where collaboration between technicians, operators, and engineers is not only encouraged, but expected. As the company scales, the Stennis Test team becomes even more critical to unlocking our next phase of growth: proving out full-stage systems and paving the way for routine, reliable flights of Terran R. About the Role: As a Mechanical Engineer II, you will be responsible for designing and operating rocket engine test stands for our Terran R engines and stages. Engineers at our Stennis facility work within a team of engineers and technicians to build and modify test facilities, as well as participate in test campaigns to flight qualify our hardware. You will be directly engaged in daily test operations, maintenance, construction, and commissioning activities in the field. The engineer II role may include aspects of both designing ground systems [Design focus] and conducting test operations [Operations focus], possibly both. This position will be titled Propulsion Test Engineer II within the organization. [Design focus] Design advanced propulsion test stands including 3D modeling, fluids, structural, and thermal analysis, fabrication drawings, fluids P&IDs, component lists, and detailed work instructions Supervise the construction, commissioning, and initial operations of these facilities Solve a variety of technical problems, across broad ranges of timeframe, complexity, cost, and long-term impact Support operations on and perform related improvements to existing test stands [Operations focus] Create, modify, and optimize test sequences, procedures, and data review processes Conduct complex propulsion test operations to assess performance of rocket engines and stages Directly control and receive telemetry from the test stand and test articles through GUIs and an integrated software suite for control, automation, and data visualization Help develop new rocket engine propulsion designs based on real test data Potentially travel to production and launch locations, up to 25% About You: Bachelor's degree in mechanical engineering, aerospace engineering, or a related field Prior experience in aerospace is not required Varied perspectives & backgrounds strengthen our team Minimum of 2 years of engineering experience in a related field Demonstrated engineering fundamentals in thermal, structural, and fluids analysis Demonstrated drive to deliver on tight schedules, especially when unconventional & creative solutions are necessary Hands-on fabrication experience using common power tools for projects at work/home/school Ability to work occasional night shifts This position requires a valid driver's license in order to operate vehicles on the test site Nice to haves but not required: Proficiency in 3D modeling and drafting, including GD&T Hands-on experience with metalworking, welding, hydraulics, manufacturing, etc. Working knowledge of fluid components such as valves, regulators, and instrumentation Ability to understand and develop fluid P&IDs (Plumbing and Instrumentation Diagrams) for large-scale test stands and supporting ground equipment Experience safely operating complex fluid systems, including high pressure gas, cryogenic fluids, flammables, and hydraulics Ability to work occasional night shifts Successful candidates must clear a background check administered by the US government to obtain clearance for on-site work at our government partner location in Stennis, Mississippi. At Relativity Space, we are committed to transparency and fairness in our compensation practices. Actual compensation will be determined based on experience, qualifications, and other job-related factors. Compensation is only one part of our total rewards package. Relativity Space offers competitive salary and equity, a generous PTO and sick leave policy, parental leave, an annual learning and development stipend, and more! To see some of the benefits & perks we offer, please visit here. Hiring Range:$112,000-$143,000 USD We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need a reasonable accommodation, please contact us at accommodations@relativityspace.com.

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Our People & Places Solutions business - reinforces our drive to improve the lives of people everywhere and epitomizes the "why" of what we do - the tremendous positive impact and value our solutions bring to our communities and society as a whole. From facilities delivering life-saving therapies and ensuring clean water to enabling the connection of people through all modes of transportation and providing access to technology - we're integrating a multitude of these solution elements to build the smart environments of tomorrow. Start your Jacobs career with a company that inspires and empowers you to deliver your best work so you can evolve, grow and succeed - today and into tomorrow. At Jacobs, we're not just building structures, we're helping our clients innovate and grow by designing, engineering, and executing the construction of their state-of-the-art facilities that are changing our world. As an emerging Field Engineer, you'll join our collaborative team providing our clients with award-winning engineering, construction management, and design-build project delivery. We are looking for a passionate Field Engineer in (location) who is driven by collaboration, exceeding expectations, and challenging the status quo. You'll be accountable for interacting with our construction sites, clients, and management to support the planning and technical portion of the project. Your keen ability to multi-task, communicate effectively and tackle project challenges will allow you to thrive in our fast-paced environment. You'll be surrounded by expert mentorship opportunities to help you thrive in your career. Bring your curiosity, talent for multi-tasking and collaboration, and extreme organizational skills and we'll help you grow, pursue and fulfill what drives you - so we can make big impacts on the world, together. * At least 2 years of experience working in heavy construction Ideally, you'll also have: * Strong communication skills both verbal and written * Strong analytical and problem-solving skills * Forward thinking, eager to learn best practices, and contribute with innovative ideas * Displayed ability to learn quickly and driven to broaden knowledge base * Ability to work effectively in a variety of teams, including multi-disciplinary teams * Passion for buildings and construction * Data center experience Jacobs is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. Learn more about your rights under Federal EEO laws and supplemental language.

Impact Recruitment is seeking a qualified and innovative Civil Engineer at our clients Biloxi, Mississippi location to design, develop, and monitor construction of a large range of projects, primarily in the areas of Land Development and/or Municipal. Responsibilities: Independently design projects focused on site design, drainage, water, wastewater, detention/water, quality of various sizes including commercial, residential, and industrial Produce drawings using AutoCAD Civil 3D, ArcGIS, and Bluebeam Prepare technical reports to support design of projects as required by permitting agencies Must have knowledge of state and local development and permitting processes Work well as a member of a team of engineers, designers, and drafters Develop and enhance client relationships and earn repeat business Review and ensure quality designs are submitted to the clients Monitor progress and project status Manage project budgets Comply with guidelines and regulations including permits, safety etc. and deliver technical files and other technical documentation as required Requirements: Proven experience in civil engineering, preferably in land development and/or municipal Excellent knowledge of design and software such as AutoCAD Civil 3D, MS Office, HECRAS, Storm & Sanitary Analysis, Hydraulic Toolbox, and HY-8 Strong communication and interpersonal skills E.I.T. desired, PE License preferred BS/MS Degree in Engineering, with bias towards Civil Engineering Benefits: Salary commensurate with experience Employer paid health insurance 401k retirement plan with employer match Paid holidays Earned vacation time If you are looking to join an industry leader, reach out to our team to see why Impact Recruitment and our clients are attracting and retaining some of the best professionals in the industry! Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Mechanical Engineer (Job Number: 337192) Description Who We AreTextron Systems is part of Textron, a $14 billion, multi-industry company employing 35,000 talented makers, thinkers, creators and doers worldwide. We make things that fly, hover, zoom and launch. Things that move people. Protect soldiers. Power industries. We serve customers in industries spanning aerospace and defense, specialized vehicles, turf care and fuel systems. This role is in Textron System's Land Systems business area. Visit TextronSystems. com & Lycoming. com to read more about who we are and the products we make!About This RoleTextron Systems is seeking engineers of all disciplines to support the United States Marine Corps Advanced Reconnaissance Vehicle (ARV) program. For this program, Textron Systems has developed the Cottonmouth ARV, a recon vehicle to be feared and a force-multiplier armed to the fangs with advanced full-spectrum reconnaissance and surveillance sensors. It's expertly designed to defeat threats beyond line of sight and comes complete with cutting-edge technologies that will keep adversaries up at night. Cottonmouth was developed using a Modular Open Systems Approach (MOSA) that is Ground Vehicle Operating System (GVOS) based employing the Tactical Assault Kit Extended (TAK-X) framework for easy capability integration. This modern vehicle platform has superior mobility capabilities to tackle treacherous off-road terrain and waterways while keeping Marines safe thanks to its advanced survivability suite and Human System Interface (HSI) focus. Amphibious mobility, unrivaled versatility, and electronic warfare capabilities define a vehicle that is adaptable, stealthy and thrives wherever enemies hide. Our teams are engaged in multiple cutting-edge development programs for defense applications. We believe people should love what they do - in this role, you will:Responsibilities: • Perform hardware engineering activities within a team of Mechanical, Electrical, and Software Engineers. • Develop imaginative, thorough, practicable technical solutions to a wide range of difficult Mechanical Engineering problems. • Contribute to concept development as part of internal cross-functional design teams, including prototyping, production, and test support. • Perform detailed design of mechanical structures and subsystems using solid modeling, requirements analysis, trade studies, mechanical engineering analysis (including structural, dynamics, and thermal), drafting and tolerance analysis, and human interface design. • Prepare high-quality formal engineering documentations such as drawings, specifications, design presentations to customers, test plans, and test reports. • Support proposal activity, providing input to cost estimates and risk assessments. • Brief peers, management, and customers on design considerations and program status. Qualifications Qualifications:• Excellent written and verbal communication skills including preparation of design documentation. • Effective presentation skills. • Solid working knowledge of Microsoft Office products (i. e. , Outlook, Word, Excel, Access, PowerPoint, and Visio). • Desire and ability to operate in a team environment is required. • Desire and ability to lead teams or individuals in design, manufacturing, or troubleshooting taskings. • Experience with mechanism development, generating Free Body Diagrams, performing basic static/dynamic/structural hand calculations, prototyping, packaging, performance specifications, material tests, and research investigations. • Familiarity with and ability to use computer-aided design tools is required; Solidworks and Autocad are preferred, MagicDraw and Jira are a plus. • Experience designing tests for military environmental, shock, and vibration qualifications. • Temperament to work in the lab, shop floor, or office. • Familiarity with ASME drawing standards is preferred. • Ability to get a security clearance. Education & Experience Levels• Experience levels will be determined by a hiring team. We are looking for candidates with a bachelor's and/or master's degree in mechanical engineering, electro-mechanical engineering, or a related field. Experience recommendations below. In compliance with the local pay transparency law, the pay range for this position is:Level I Engineer: typically, 0 - 1 year of experience Level II Engineer: typically, 2+ years of experience Level III Engineer: typically, 5+ years of experience Level IV Engineer: typically, 9+ years of experience How We CareAt Textron Systems, our talented people make us successful. We promote an inclusive environment where we value individuality, differences, and unique perspectives. Our Company is committed to offering employees opportunities to grow and develop. Our benefits and compensation packages are designed to help our talented employees excel and achieve their goals, so they can make a difference every day in and outside of the workplace. Below are just a few examples!- Flexible Work Schedules- Education Assistance- Career Development & Training Opportunities- Wellness Program (including Fitness Reimbursement)- Medical, Dental, Vision & 401(K) with Company Funding- Paid Parental LeaveAre you a Military Veteran?Textron's products and services are trusted everyday by those who protect our country. We are dedicated to hiring these Veterans and aim to translate their skills to make an impact on our Company. EEO StatementTextron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law. Recruiting Company: Textron Systems Primary Location: US-Louisiana-SlidellJob Field: EngineeringSchedule: Full-time Job Level: Individual ContributorJob Type: ExperiencedShift: First ShiftTravel: Yes, 10 % of the TimeJob Posting: 01/14/2026, 2:58:30 PM

GENERAL FUNCTION: The Field Engineer A performs engineering activities in support of production, testing, and trials. This role provides direct engineering support on the deck plate and acts as a liaison between production and functional engineering teams. The position reports to the Field Engineering Manager. TYPICAL DUTIES: The following statements are intended to describe the general nature and level of work being performed and are not to be construed as an exhaustive list of all responsibilities. * The following statements reflect the general nature and level of work being performed. They are not intended to be an exhaustive list of all responsibilities: * Make engineering decisions on the deckplate in coordination with the functional engineering group. * Perform field engineering activities to support the production process. * Shipcheck areas on the vessel, able to get in tight areas, crawl, climb or enter manholes * Provide technical details and support to craft personnel during production. * Generate field sketches and prepare material lists by way of YEC (Yard Engineering Change); FECN (Field Engineering Change Notice) for review by Field Engineer Manager. * Determine material requirements related to engineering changes, outfitting activities, and scope impacts. * Able to provide basic calculations in disciplined area to support resolution * Collaborate with craft personnel to assess and resolve outfitting/fitting issues. * Identify and resolve production-related engineering problems to support project timelines and quality standards. * Able to perform and produce resolution with minimal supervision * Strong knowledge of maritime regulations and certifications with SUPSHIP, Coast Guard and ABS REQUIRED KNOWLEDGE, SKILLS & ABILITIES: * • Bachelor's degree in a marine engineering discipline from an accredited institution. * In-depth knowledge of shipyard production processes as they relate to engineering functions. * Familiarity with organizational policies, procedures, and industry best practices. * Strong problem-solving skills and the ability to make sound decisions in a dynamic production environment. * Ability to establish priorities, meet goals, and maintain effective working relationships at all levels of the organization. * Must know Shipconstructor/AutoCAD * NAVIS * SharePoint * Microsoft Platform; EXCEl, MS Word, PowerPoint EXPERIENCE & TRAINING: Bachelor's Degree in Engineering with three or more years' experience in engineering related to the marine industry with a focus on deckplate resolution. One or more years' drafting experience related to production or equivalent combination of experience and training which results in the required knowledge, skills, and abilities. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

GENERAL FUNCTION : The Field Engineer A performs engineering activities in support of production, testing, and trials. This role provides direct engineering support on the deck plate and acts as a liaison between production and functional engineering teams. The position reports to the Field Engineering Manager. TYPICAL DUTIES: The following statements are intended to describe the general nature and level of work being performed and are not to be construed as an exhaustive list of all responsibilities. The following statements reflect the general nature and level of work being performed. They are not intended to be an exhaustive list of all responsibilities: • Make engineering decisions on the deckplate in coordination with the functional engineering group. • Perform field engineering activities to support the production process. • Shipcheck areas on the vessel, able to get in tight areas, crawl, climb or enter manholes • Provide technical details and support to craft personnel during production. • Generate field sketches and prepare material lists by way of YEC (Yard Engineering Change); FECN (Field Engineering Change Notice) for review by Field Engineer Manager. • Determine material requirements related to engineering changes, outfitting activities, and scope impacts. • Able to provide basic calculations in disciplined area to support resolution • Collaborate with craft personnel to assess and resolve outfitting/fitting issues. • Identify and resolve production-related engineering problems to support project timelines and quality standards. • Able to perform and produce resolution with minimal supervision • Strong knowledge of maritime regulations and certifications with SUPSHIP, Coast Guard and ABS REQUIRED KNOWLEDGE, SKILLS & ABILITIES: • Bachelor's degree in a marine engineering discipline from an accredited institution. • In-depth knowledge of shipyard production processes as they relate to engineering functions. • Familiarity with organizational policies, procedures, and industry best practices. • Strong problem-solving skills and the ability to make sound decisions in a dynamic production environment. • Ability to establish priorities, meet goals, and maintain effective working relationships at all levels of the organization. • Must know Shipconstructor/AutoCAD • NAVIS • SharePoint • Microsoft Platform; EXCEl, MS Word, PowerPoint EXPERIENCE & TRAINING: Bachelor's Degree in Engineering with three or more years' experience in engineering related to the marine industry with a focus on deckplate resolution. One or more years' drafting experience related to production or equivalent combination of experience and training which results in the required knowledge, skills, and abilities. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Job Code **5023** \# of Openings **1** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=5023) Ghost Rock, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a Senior Engineering Technician V. **Position Responsibilities:** + Design, operate, maintain, and test of Surface Combatant Class Naval ship systems and equipment. **Position Requirements:** + Graduate of a high school, trade or industrial school or correspondence school in which credits were received in algebra, plane geometry, trigonometry, and physics. + Five (5) years of practical experience in responsible engineering duties including five (5) years of progressive experience involving design, operation, maintenance, and testing of Surface Combatant Class Naval ship systems and equipment should have five (5) years of experience directly related to Surface Combatant major construction milestones and Surface Combatant Combat Support Systems testing at Building Yard/Homeport locations. To Apply: *************************************************** Requisition?org=GATEWAYVENT&cws=49&rid=5023 VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

#LI-DNI Modeling and Simulation Engineer Gulfport, MS What we do Integer Technologies is an applied research and product development company founded by scientists and engineers with a passion for protecting freedom with innovation. We perform R&D on next-generation systems and technologies for the Department of Defense and other U.S. Government agencies. We are hardware and software developers with experience transforming research into fieldable technology. Our core portfolio of research includes projects in power & energy systems, unmanned systems (with an emphasis on maritime systems), digital engineering, cyber security, and advanced manufacturing. Our mission is to create a safer world by translating scientific discoveries into reliable products that address urgent national security needs... at the speed of relevance. Company Benefits Integer fully covers medical, prescription, vision, and dental insurance costs for the employee and dependents. Meaning Integer standard plan pays 100% of health insurance premiums for your entire family from a well-known national insurer, saving its employee's thousands of dollars annually. Relocation assistance available. Base salaries which exceed local & national industry averages. Year-end performance-based bonuses. 401(k) with company matching that vest immediately; no funny business. Paid Vacation Paid Sick Leave Paid Holidays Company Perks Startup culture with the stability of a large company. Integer's business plan has years of time phased contracted work, alleviating the would-be risk from a traditional small company. Direct access to company leadership, prioritization of people over process, and a stellar team with a shared desire for personal and professional growth. Friendly atmosphere where people enjoy not only their work and what they're creating but enjoy helping each other as well. Waterfront office view! About the Role The Modeling and Simulation Engineer will be focus on building digital models for unmanned, autonomous, submersible systems. This role requires an understanding of digital engineering, modeling and simulation tools, and how to apply those tools to mission-level assessments of distributed, unmanned operations. This includes developing modeling and simulation environments to enable and demonstrate new autonomy capabilities. The Modeling and Simulation Engineer will assist in large, multi-year subsea data intelligence research programs with an emphasis on autonomous sense-making, and mission-driven use of subsea and oceanographic datasets. This role will assist in the development of a decision support framework for uncrewed underwater vehicles capable of adapting in real time to changing environmental conditions. Many of our projects focus on using sensor-informed edge-deployed models running onboard uncrewed platforms (e.g., uncrewed surface vessels and uncrewed underwater vessels) to make real-time assessments of mission goals and provide the operators of uncrewed systems with decision aids to maximize mission outcomes. Executing this approach for maritime systems, which may involve multiple uncrewed or autonomous systems operating together to achieve a given mission, requires holistic system-wide modeling and simulation approach with a distillation of relevant factors correlated with mission outcomes. Therefore, we are particularly interested in candidates who have experience in extracting critical mission-relevant data from dense sources (e.g., modeling and simulation tools, sensors such as acoustic or magnetic, and/or machinery control systems) and translating that into actionable, mission-level information for autonomous decision making at the edge. Integer is a science and technology research and development organization. As such, much of our work entails developing solutions for complex problems that presently have no known solutions. To achieve internal and customer project goals all candidates must be able to perform research, understand new concepts from other engineering disciplines on advanced and complex topics, and document findings in a way that is easy for non-experts to understand. The Subsea Data Intelligence Engineering Manager must be able to serve as a Principal Investigator and a technical contributor with the technical background to contribute to the development of new technologies and prototypes. Primary Responsibilities Serve as a Modeling and Simulation Engineer for submersible systems, with an emphasis on platform and sensor modeling for autonomous systems. Develop modeling and simulation frameworks that can demonstrate new capability in virtual environments prior to deployment on physical systems. Contribute meaningfully to the technical deliverables of industry-academia research projects aimed at intelligent operation of unmanned and autonomous maritime systems. Assist with the development of modeling and simulation strategies that balance speed, cost, and value of alternative approaches depending on system and project objectives. Engage with partners and customers to understand customer or user needs and elicit project requirements. Work collaboratively with software engineering and business development team members to develop new products and services using modeling and simulation tools and insights derived from their application. Core Requirements Must be a U.S. Citizen with the ability to obtain and maintain a U.S. DoD Secret Clearance. Bachelor's degree in relevant field (e.g., computer science, computer engineering, electrical engineering, mechanical engineering, or other related field) and 6+ years of experience relevant to primary responsibilities outlined above. OR Master's degree in relevant field and 4+ years of relevant experience. Experience with the physics-based modeling research-grade modeling and simulation (M&S) tools, including the development and use of M&S tools for assessment of novel technology. Experience with numerical methods and scientific software development in general purpose programming languages (e.g., Python, C++, Matlab). Additional Desired Qualifications Ph.D. in relevant field (e.g., computer science, computer engineering, electrical engineering, mechanical engineering, or other related field) Experience with unmanned and autonomous systems research involving maritime autonomous systems such as uncrewed surface vessels and uncrewed underwater vessels. Familiarity with maritime sensors (acoustics, magnetic, positioning, etc.) Experience in using AI/ML frameworks (e.g., PyTorch, TensorFlow, Flux, or similar). Experience in Digital Twin development Understanding of the Navy and Department of Defense's mission, problem set, and strategy for the integration of autonomous systems.

Successful candidate will be responsible for but not limited to: 1.) Auditing, researching and correcting Combat Systems for DDG 51 new construction ships Built in Pascagoula MS. 2.) Troubleshooting, solving discrepancies and submitting weekly reports. 3) Interface with ship's force, government employees and other contractors. 4.) Perform technical review of engineering drawings, ship specifications and change packages for accuracy and report findings. Responsibilities include but are not limited to the following: Ability and experience to thoroughly reviewing US Navy specifications and drawings in order to troubleshoot issues. Ability to work aboard a new construction ship up and down vertical ladders. Qualify for a US Government Secret Security clearance. Working knowledge of Microsoft Office Professional. About BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Intelligence & Security (I&S), based in McLean, Virginia, designs and delivers advanced defense, intelligence, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do-from intelligence analysis, cyber operations and IT expertise to systems development, systems integration, and operations and maintenance services. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats inspires us to push ourselves and our technologies to new levels. Our Commitment to Diversity, Equity, and Inclusion: At BAE Systems, we work hard every day to nurture an inclusive culture where employees are valued and feel like they belong. We are conscious of the need for all employees to see themselves reflected at every level of the company and know that in order to unlock the full potential of our workforce, everyone must feel confident being their best, most sincere self and be equipped to thrive. We provide impactful professional development experiences to our employees and invest in social impact partnerships to uplift communities and drive purposeful change. Here you will find significant opportunities to do meaningful work in an environment intentionally designed to be one where you will learn, grow and belong. Preferred Skills and Education Knowledgeable with Adobe Acrobat Professional Ability to communicate very technical issues relating to AEGIS Combat System Perform well in a team environment. Capable of professional interface with extremely varied team skillsets. Benefits Information Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Intern Benefits: Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. Please note: Some benefits may be different for union employees that are governed by a collective bargaining agreement (CBA) or for positions covered by a wage law called the McNamara-O'Hara Service Contract Act (SCA).

AMERICAN SYSTEMS is seeking an experienced Senior Engineering Technician Level V in Pascagoula, MS. Join our team supporting on-site Hull, Mechanical & Electrical (HM&E) engineering and technical services for DDG 51 Class Flight III new construction ships. This position is integral to ensuring the successful delivery and operational readiness of the next generation of Surface Combatants. Responsibilities As a Senior Engineering Technician Level V, you will: Technical Support: Research technical requirements, availability, and alternatives for spare parts and assemblies for ship systems and equipment; provide actionable information to end users. Deliver updates and revisions to technical documentation concerning installation, testing, operation, and maintenance of ship systems and equipment. Support updates related to Engineering Operational Sequencing System (EOSS), Technical Manuals, and Planned Maintenance System (PMS). Crew Coordination: Assist in crew familiarization processes including, but not limited to: preparation for AEGIS Light Off (ALO), Main Engine Light Off (MELO), Ship Trials, Counterpart Services, Crew Move Aboard (CMA), Damage Control Material Assessment (DCMA), Light Off Assessment (LOA), and Crew Certification Phases 1 and 2. Integrated Logistics Support: Provide technical reviews of System and Equipment Integrated Logistics Support (ILS) elements as directed by NSWCPD. Lifecycle Services: Support full life-cycle activities for DDG 51 Class ships, focusing on Flight III specific systems. Additional Duties: Experience with shipboard corrosion control is highly valued, especially performing corrosion control inspections and/or holding AMPP CIP inspector certification. #LI-EW1 Qualifications Graduate of a high school, trade, industrial, or correspondence school with credits in algebra, plane geometry, trigonometry, and physics. Minimum of five (5) years practical experience in responsible engineering duties. At least five (5) years progressive experience involving design, operation, maintenance, and testing of Surface Combatant Class Naval ship systems and equipment. Five (5) years direct, hands-on experience with major construction milestones and Combat Support Systems testing for Surface Combatants at Building Yard and/or Homeport locations. Preferred Qualifications: Experience in shipboard corrosion control (inspections and/or AMPP CIP certification) is highly desirable. Familiarity with DDG 51 Class Flight III equipment, systems, and operational procedures. Qualified candidates are encouraged to apply and support the U.S. Navy's mission to deliver advanced maritime capability for future generations. Pay Transparency Statement AMERICAN SYSTEMS is committed to pay transparency for our applicants and employee-owners. The salary range for this position is USD $77,600.00/Yr. - USD $129,600.00/Yr. Actual compensation will be determined based on several factors permitted by law. AMERICAN SYSTEMS provides for the welfare of its employees and their dependents through a comprehensive benefits program by offering healthcare benefits, paid leave, retirement plans, insurance programs, and education and training assistance. EEO Statement EEO Race/Sex/Disability Status/Veteran Status

Team: 52 Engineering Entity: Ingalls Shipbuilding Yes Full-Time Shift: 1st Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No We're building tomorrow's fleet today With more than 11,000 employees, HII's Ingalls Shipbuilding division is the largest manufacturing employer in Mississippi and a major contributor to the economic growth of Alabama. For nearly 85 years, we've designed, built and maintained amphibious ships, destroyers, and cutters for the U.S. Navy and the U.S. Coast Guard. The largest supplier of U.S. Navy surface combatants, we're simultaneously building four classes of ships and have pioneered the development and production of technologically advanced, highly capable ships for the surface Navy fleet for decades. Think that's cool? Keep reading: The Role Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. Must Have 5 Years with Bachelor of Science degree in related field; 3 years of relevant professional experience with a Master's Degree; 0 years with a PhD Nice to Have Ability to apply standard engineering practices, scientific principles and techniques to specific situations and recognize discrepancies. Ability to interact and present information verbally and in writing to internal and external customers. Proficient in MS Office and AutoCAD experience preferred. Mechanical Engineering degrees and experince prefered. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #1 for Ingalls Shipbuilding.

Provides repair, maintenance, and construction services to ensure the environment of the hospital and its clinics are safe, comfortable, and functional. Education Required: High School or GED Experience Required: 3 years of experience as a journeyman craftsman in building trades or as a mechanic Repairs and performs preventive maintenance on advanced and specialized building systems/equipment at journeyman level with little or no supervision needed. Interfaces with suppliers and/or vendors to assist in troubleshooting problems and in identifying corrective actions. Effectively plans, organizes, and executes repairs and projects with little or no supervision in one or more areas of expertise. Directs project work teams with good leadership skills, obtaining the best of assigned projects. Documents work performed and changes made to building systems and equipment. Reduces costs through effective use of tools, parts, information, and skills. Constructs new areas and remodels existing areas at journeyman level with little or no supervision required. Constructs new areas and remodels existing areas, meeting budget and time requirements. Effectively plans, organizes, and executes construction projects with little or no supervision in one or more areas of expertise. Directs project work teams with good leadership skills, obtaining the best execution of assigned projects. Documents work performed and changes made to building systems and equipment. Reduces costs through effective use of tools, parts, information, and skills. Conducts fire drills and life safety inspections. Fire drills are properly conducted and documented. Conducts fire drills as a positive learning experience for participants.

Why Advance Your Career at Pinnacle? Our people are our driving force, vital in realizing our goal of a more reliable world. We prioritize fostering professional growth, offering comprehensive onboarding, training, leadership programs, and continuous learning opportunities. At Pinnacle, you'll expand your horizons across disciplines, collaborating with diverse teams, and participating in the development of leading-edge solutions. Curiosity, engagement, and impact are celebrated traits here. We strive for excellence in everything and seek people who share this drive to join our team. Our collaborative work environment encourages employees to develop the tools and techniques that redefine what reliability means to the industry. The Impact of a Reliability Data Analyst As a Reliability Data Analyst (RDA), you will expand on your professional experience by leveraging existing skills to contribute to new industries in numerous disciplines, such as, Mechanical Integrity (MI), Risk Based Inspection (RBI), Reliability Centered Maintenance (RCM), Quantitative Reliability Optimization (QRO), technology development and implementation, and groundbreaking research and development opportunities. You will gain exposure to and will require growth in both project leadership and technical knowledge competencies. Your job responsibilities: Solve complex problems using data and critical thinking while following Recognized and Generally Accepted Good Engineering Practices (RAGEGAP) Gather and organize design, operating, and maintenance data to make recommendations in reliability strategies, leveraging different software and technology. Analyze pertinent data to evaluate the consequence and probability of failures and overall risk levels for fixed and non-fixed assets across different types of units and facilities. Facilitate or participate in customer kickoff, update, and validation meetings for tasks such as process interviews, task selections, and other reliability focused deliverables Develop an individualized career plan for quick progression into the Project Management or Technical Excellence leadership paths. Required Qualifications: Bachelors degree in an engineering field and 3+ years working in an industrial facility, in the areas of reliability, operations, maintenance, or inspections. In lieu of an engineering degree, a minimum of 5 years of experience in project execution or facility support is required in the areas of reliability, operations, maintenance, or inspections. Independent problem solver and high performing-team player. Ability to learn and understand technical literature, documents, and drawings (e.g., process descriptions, training manuals, P&IDs, etc.) Ability to write or learn to write technical documents (Technical Writing). Effective and professional verbal and written communication skills. Detail-oriented with a strong aptitude for learning new processes and skills. Commitment to relocate domestically or internationally (multiple locations) to a Pinnacle office or customer site or travel up to 50% based on project and customer needs. Locations could include, but are not limited to the following: Houston area (multiple locations), Chicago, IL, Salt Lake City, UT, Richmond, CA, Pascagoula, MS, The Netherlands, Canada, Germany Proficient in Microsoft Office Suite; intermediate to advanced Excel skills preferred. Ability to pass background, drug screen and customer/site-specific safety training. Depending on project site assignment, may be subject to hair follicle Ability to obtain a TWIC card, if project location assignment requires. Preferred Qualifications: IDMS and/or CMMS experience (SAP, Maximo, PCMS, AllAssets, GE/Meridium, etc.) Any of the following certifications: API 510/570/653 API RP 580 API 571 CMRP PMP/CAPM Direct reports: This role does not have direct reports, but as you grow and advance into Project Management or Technical excellence roles, you will potentially lead a team with multiple direct reports. Benefits: The Complete You Health, vision, and dental insurance, life insurance, 401(k) matching, paid time off (PTO), nine paid holidays, 8 hours of volunteer paid time off (VPTO), and maternity and parental leave. Campus Perks Onsite gym with full amenities, walking workstations, free parking, mini mart/snack machines, gourmet coffee machines, multiple indoor and outdoor collaboration areas, huddle rooms, deep workspaces, and lactation facilities. Company Celebrations Quarterly town hall and fellowships, length of service awards where employees receive additional paid time off and bonuses to cover travel expenses for anniversary milestone trips (5, 10, and 15 years). Empowering You for Success Opportunity to participate in customer-focused project management groups (PODs) that help facilitate collaboration and project support, access to company technology stack of Microsoft Office 365 Suite and MS Teams, comprehensive onboarding, on-demand training, regular lunch and learns, supervisor and accountability training, leadership development programs, continuous learning opportunities, and more. About Pinnacle Headquartered in Pasadena, Texas, Pinnacle is focused on helping industrial facilities improve reliability performance, resulting in increased production, optimized spend, and improved process safety and environmental impact. Pinnacle bridges the gap between data and reliability decisions by combining reliability engineering expertise with data science and technology. Pinnacle is privately held and has been consistently recognized for its growth by Inc. Magazine, the Houston Business Journal, and more. Limitations and Disclaimer This describes the general job duties, accountabilities and physical requirements associates with the position; it is not an exhaustive list of all the duties, accountabilities, or skills required for the position. The general job duties, accountabilities and physical requirements associated with the position are subject to modification to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general job duties, accountabilities, and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitude to perform each duty, accountability, and physical requirement proficiently. Visa Sponsorship: Employment eligibility to work with Pinnacle in the U.S. is required and the company will not pursue Visa sponsorship for this position. Pinnacle participates in E-Verify, a federal government system used to verify employment authorization and social security number of each new employee. Pinnacle is an equal employment opportunity employer and does not discriminate based on race, color, national origin, religion, gender identity, sexual orientation, sex, age, disability, veteran or military status, genetic information, or any other characteristic protected by applicable law.

The future you want is within reach. Let's build it together. At PCL Civil Constructors, Inc., part of the PCL Family of Companies (PCL), we don't just build projects-we build opportunities, careers and communities. We are 100% employee-owned, every employee has a stake in our success, and that shared commitment drives how we work, grow and lead in the construction industry. We're a team of builders who care deeply about what we create and who we build it with. That includes you. We are not only investing in what's next in construction, we are investing in what's next for your career. As a Project Engineer- Bridge Structures & Transportation for PCL Civil Constructors, Inc. in Slidell, Louisiana, you'll have the opportunity to complex transportation projects that enhance connectivity and improve community infrastructure. Responsible for supporting the design and construction of bridge structures within transportation projects. Why Choose PCL? Choose a career with rewards that matter. PCL's total rewards are designed to support your growth, well-being and future success-because when you succeed, we all do. Our offerings could include: Employee ownership opportunities that build long-term value Annual discretionary performance bonuses 401(k) with company match Industry-leading medical, dental and vision benefits Prescription drug coverage and telemedicine services Life, AD&D and disability insurance Paid parental leave and family care support HSA or FSA for healthcare, dependent care and transportation Mental health and wellness support, including Employee Assistance Programs Career growth pathways, leadership development and mentorship programs Access to world-class training through PCL's College of Construction and professional development courses Ongoing opportunities to learn new skills, explore different roles and grow your career across sectors and regions Here's how a Project Engineer- Bridge Structures & Transportation for PCL Civil Constructors, Inc. within Civil East contributes to our team: Responsibilities Maintains contract with select trade partners and responsible for some subcontract administration, including defining work scope, answering inquiries and supervising progress. Participates in change management and change order process, including pricing, processing, and assessing cost and schedule impact before reviewing. Maintains and performs project document control and procedures (coordinating RFIs, shop drawing and submittal process maintaining as-built drawings, etc.) (CIVIL). Collaborates with the project team lead in supervising design with timely response to the submittal schedule. Participates in the reviews of trade partners' submittals form compliance with scope, design documentation prior to forwarding to design for review. Coordinates with project manager and superintendent in managing and reporting overall project or select scope performance as per site HSE, cost management, schedule, and quality. Prepares and supervises progress claims and estimates. Coordinates inventory and tracking of materials and equipment and expedites material orders. Assists with site inspections from the design team to resolve constructability and site coordination issues and reviews and sign offs on functionality, AHJ (Authority Having Jurisdiction) requirements, and code compliance. Ensures that resolution is achieved and accepted by all partners. Involved in and participates with overall project closeout, including document archival, maintenance and warranty manuals, deficiencies, and warranty work. Responsible for supporting the design and construction of bridge structures within transportation projects. Duties include performing structural calculations for temporary works, assisting in the management of design consultants, facilitating and managing the development of work plans, maintaining project look-ahead schedules, and providing technical support to field staff during construction to ensure compliance with safety and quality standards. This will be a permanent role on the jobsite. Proficient in Microsoft Suite (Excel, Word, etc.), Bluebeam, and AutoCAD. Qualifications 1-3 years of construction experience in an operational role preferred. Associates or bachelor's degree in a related subject area: construction management, engineering, architecture preferred, or equivalent experience. Verified understanding about construction equipment and techniques, drawings and specifications, project health, safety, and environment (HSE), quality, building materials, and required standards as per field. Ability to apply basic engineering/problem solving principles to construction challenges. Effective verbal, written, and interpersonal communication. Demonstrates flexibility and ability to work in a fast-paced environment. Planning, organizational, and time management skills with the ability to multi-task, prioritize own work and delegate simple tasks. Ability to build a comprehensive schedule. Ability to coordinate subcontracts and contract documents. Shown understanding in Microsoft Office Suite and internal operational systems with a strong ability to embrace new technology. Your Work Has Purpose Here PCL projects are where life happens, where communities connect, careers begin, and progress is made. Regardless of the type of project, we are building something bigger: a future that's inclusive, resilient and full of opportunity. At PCL Civil Constructors, Inc., we are committed to creating a workplace where everyone belongs. We value the diverse experiences, identities and perspectives our employees bring. Employment decisions are based on merit, potential and the drive to make a difference, regardless of race, gender, age, ability or background. We know everyone's needs are different, if you require accommodation during the application process, please contact *************** and include the position and location of interest. Company: PCL Civil Constructors, Inc. Primary Location: Slidell, Louisiana Job Title: Project Engineer- Bridge Structures & Transportation Requisition ID: 11001

**The future you want is within reach. Let's build it together.** At PCL Civil Constructors, Inc., part of the PCL Family of Companies (PCL), we don't just build projects-we build opportunities, careers and communities. We are 100% employee-owned, every employee has a stake in our success, and that shared commitment drives how we work, grow and lead in the construction industry. We're a team of builders who care deeply about what we create and who we build it with. That includes you. We are not only investing in what's next in construction, we are investing in what's next for your career. As a Project Engineer- Bridge Structures & Transportation for PCL Civil Constructors, Inc. in Slidell, Louisiana, you'll have the opportunity to complex transportation projects that enhance connectivity and improve community infrastructure. Responsible for supporting the design and construction of bridge structures within transportation projects. Why Choose PCL? Choose a career with rewards that matter. PCL's total rewards are designed to support your growth, well-being and future success-because when you succeed, we all do. Our offerings could include: + Employee ownership opportunities that build long-term value + Annual discretionary performance bonuses + 401(k) with company match + Industry-leading medical, dental and vision benefits + Prescription drug coverage and telemedicine services + Life, AD&D and disability insurance + Paid parental leave and family care support + HSA or FSA for healthcare, dependent care and transportation + Mental health and wellness support, including Employee Assistance Programs + Career growth pathways, leadership development and mentorship programs + Access to world-class training through PCL's College of Construction and professional development courses + Ongoing opportunities to learn new skills, explore different roles and grow your career across sectors and regions Here's how a Project Engineer- Bridge Structures & Transportation for PCL Civil Constructors, Inc. within Civil East contributes to our team: **Responsibilities** + Maintains contract with select trade partners and responsible for some subcontract administration, including defining work scope, answering inquiries and supervising progress. + Participates in change management and change order process, including pricing, processing, and assessing cost and schedule impact before reviewing. + Maintains and performs project document control and procedures (coordinating RFIs, shop drawing and submittal process maintaining as-built drawings, etc.) (CIVIL). + Collaborates with the project team lead in supervising design with timely response to the submittal schedule. + Participates in the reviews of trade partners' submittals form compliance with scope, design documentation prior to forwarding to design for review. + Coordinates with project manager and superintendent in managing and reporting overall project or select scope performance as per site HSE, cost management, schedule, and quality. + Prepares and supervises progress claims and estimates. + Coordinates inventory and tracking of materials and equipment and expedites material orders. + Assists with site inspections from the design team to resolve constructability and site coordination issues and reviews and sign offs on functionality, AHJ (Authority Having Jurisdiction) requirements, and code compliance. Ensures that resolution is achieved and accepted by all partners. + Involved in and participates with overall project closeout, including document archival, maintenance and warranty manuals, deficiencies, and warranty work. + Responsible for supporting the design and construction of bridge structures within transportation projects. + Duties include performing structural calculations for temporary works, assisting in the management of design consultants, facilitating and managing the development of work plans, maintaining project look-ahead schedules, and providing technical support to field staff during construction to ensure compliance with safety and quality standards. This will be a permanent role on the jobsite. + Proficient in Microsoft Suite (Excel, Word, etc.), Bluebeam, and AutoCAD. **Qualifications** + 1-3 years of construction experience in an operational role preferred. + Associates or bachelor's degree in a related subject area: construction management, engineering, architecture preferred, or equivalent experience. + Verified understanding about construction equipment and techniques, drawings and specifications, project health, safety, and environment (HSE), quality, building materials, and required standards as per field. + Ability to apply basic engineering/problem solving principles to construction challenges. + Effective verbal, written, and interpersonal communication. + Demonstrates flexibility and ability to work in a fast-paced environment. + Planning, organizational, and time management skills with the ability to multi-task, prioritize own work and delegate simple tasks. + Ability to build a comprehensive schedule. + Ability to coordinate subcontracts and contract documents. + Shown understanding in Microsoft Office Suite and internal operational systems with a strong ability to embrace new technology. **Your Work Has Purpose Here** PCL projects are where life happens, where communities connect, careers begin, and progress is made. Regardless of the type of project, we are building something bigger: a future that's inclusive, resilient and full of opportunity. At PCL Civil Constructors, Inc., we are committed to creating a workplace where everyone belongs. We value the diverse experiences, identities and perspectives our employees bring. Employment decisions are based on merit, potential and the drive to make a difference, regardless of race, gender, age, ability or background. We know everyone's needs are different, if you require accommodation during the application process, please contact *************** and include the position and location of interest. **Company:** PCL Civil Constructors, Inc. **Primary Location:** Slidell, Louisiana **Job Title:** Project Engineer- Bridge Structures & Transportation **Requisition ID:** 11001

Job Description is located onsite in our Bayou La Batre, AL office or our Elmwood, LA office Join the Birdon team and be a part of our growth! Our Engineering Team plays an integral role in ensuring our continued operations. This role reports to the Ship Design Director and will be responsible for managing all engineering activities throughout the program lifecycle for assigned program(s). Some of your daily functions will include: Responsible for organizing engineering team to meet program technical, schedule, and cost requirements to assigned program(s). Defines, develops, and reviews detailed schedules, metrics, and management tools to support contract milestones and deliverables. Monitors system integration, cost and risks, and supportability of ship design in conversion of contract requirements. Monitors program to ensure technical work scope, schedule, and budget are well defined and maintained. Provides the engineering team leadership to overcome technical challenges. Work with engineering leadership to ensure resources are assigned to meet contract milestones and deliverables. Serves as technical lead for subcontract management to include the review, approval, and oversight of design execution for all technical scope of all major subcontractors. Manage design configuration for engineering change including design integration and change adjudication. Support development of Engineering Change Proposal Responsible for technical relationships with customer and program office. If you have 8+ years' experience of shipyard design and construction, with 3+ years' experience in a managerial role, and a bachelor's degree in Engineering (or related/relevant field) we want to talk to you! Birdon is committed to the HEALTH and SAFETY of our workforce and to the ENVIRONMENT we work in. We expect this same commitment from all employees. Birdon America Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Know Your Rights The Company invites any applicant and/or employee to review the Company's written Affirmative Action Plan. This plan is available for inspection upon request by emailing ************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact ************ for further assistance.

Are you interested in working on design and construction projects that impact our world? CDM Smith offers employees opportunities to delve into many aspects of electrical engineering, including the design of complex power systems, observation and construction services, and power system analyses, etc. We want to match you up with the projects that inspire you. You will collaborate on challenging and meaningful work that positively impacts the community and makes a difference in the world while applying innovative, state-of-the-art software and programs. At CDM Smith, we are invested in your success. We offer flexible work options that allow our employees to meet their needs outside of work. Sign-on bonus may be considered for the successful candidate. We have multiple openings for Senior Electrical Specialists. As a Senior Electrical Specialist, you will: Create moderate to highly complex designs of electric master system plans, power systems, protection and generation models, facility power systems, sustainability/renewable energy systems, and other similar electrical systems. Execute a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches. Incorporate changes to designs or sketches and redlines or mark-ups on ongoing projects. Contribute to studies of power systems and electrical calculations for electrical systems, lighting simulations, lighting layouts, communications, fire alarm, security and other similar calculations. Perform site reviews and studies, as needed, to ensure designs are aligned with location specifications. Update design requirements as necessary. Collaborate with sales staff to create proposals in response to current and potential client requests for proposals (RFPs). Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meet with current and potential future clients to review their current and future design needs Provide technical guidance and training to more junior staff. Mentor more junior staff and develop them for future growth within the discipline and firm. **Job Title:** Electrical Engineering Specialist 5 **Group:** IND **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree. 7 years of related experience. Equivalent additional directly related experience will be considered in lieu of a college degree. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. **Preferred Qualifications:** Experience designing power systems for water, wastewater, industrial, federal, and transit facilities. Experience designing medium and low-voltage power distribution systems. Familiar with industry and federal codes and standards (NEC, NFPA, NESC, IEEE, UFC, etc.) Experience conducting power system analysis using software such as SKM Power Tools for Windows and ETAP. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 10% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Expert knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices. Advanced knowledge in design, calculations and design systems. Excellent knowledge of Microsoft business software (excel, word, etc.). Excellent communication, collaboration, and presentation skills with the ability to engage clients and convey complex concepts in an understandable manner. Ability to work effectively across all levels in a highly dynamic environment. Strong analytical and problem-solving skills. Good knowledge of federal, state and local regulations. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $81,765 **Pay Range Maximum:** $134,909 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Fully Remote or Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.