Engineering associate jobs in High Point, NC - 161 jobs

All

Engineering Associate

Engineering Technician

Engineering Internship

Materials Engineering Technician

Mechanical Engineer

Engineering Specialist

Manufacturing Engineering Technician

Engineering Aide

Research And Development Engineer

Project Engineer

Engineering Specialist (Flex Staff)
CDM Smith 4.8
Engineering associate job in Greensboro, NC
CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$78.6k-157.2k yearly 8d ago

Looking for a job?

Let Zippia find it for you.

Mechanical Engineer
Actalent
Engineering associate job in High Point, NC
Responsibilities + Design and develop structures, subassemblies, and mechanical components of truck and trailer bodies or ambulances using CAD software such as Solid Edge, SolidWorks, or AutoCAD Inventor. + Create detailed 3D models of sheet metal parts, assemblies, and manufacturing drawings with appropriate tolerances and material specifications. + Perform engineering calculations and analyses (structural, load, and performance) to validate designs. + Support production through technical drawings, BOMs, process documentation, and engineering change management. + Collaborate cross-functionally with manufacturing, purchasing, and quality departments to ensure design intent is maintained through production. + Review and improve existing designs for manufacturability, cost efficiency, and durability. + Research materials, components, and manufacturing methods for potential implementation in future designs. + Participate in prototype builds and testing to evaluate design performance and validate design changes. + Ensure compliance with applicable safety, regulatory, and customer standards. + Provide technical support for field issues and product improvement initiatives. Essential Skills + Bachelor's degree in mechanical engineering or equivalent. + 3-5 years of prior work experience within a manufacturing setting outside of college or internships. + Proficiency in Solid Edge and SolidWorks. + Knowledge of MS Office products (Word, Excel, PowerPoint, Outlook). + Experience with Epicor ERP. + Ability to responsibly handle confidential information. Additional Skills & Qualifications + Strong understanding of mechanical design principles, fabrication methods, and structural analysis. + Knowledge of materials (steel, aluminum, composites) and their applications in vehicle manufacturing. + Understanding of structural adhesives and their uses. + Ability to interpret engineering drawings, specifications, and standards. + Strong problem-solving, analytical, and organizational skills. + Excellent communication and teamwork abilities. + Familiarity with manufacturing processes such as welding, forming, and assembly. + Experience with Epicor ERP systems is a plus. Work Environment The work environment involves a manufacturing setting with exposure to weather, noise, and moving mechanical parts. The role requires a mix of desk work using CAD software and physical presence on the manufacturing floor. Physical demands include occasional lifting of up to 30 lbs and specific vision abilities. This company is an equal opportunity employer and provides accommodations upon request during the selection process. Job Type & Location This is a Permanent position based out of High Point, NC. Pay and Benefits The pay range for this position is $70000.00 - $80000.00/yr. Have copy of benefits to share. Workplace Type This is a fully onsite position in High Point,NC. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.
$70k-80k yearly 2d ago
Engineering Aide - CMT
Geo-Hydro Engineers 3.6
Engineering associate job in Greensboro, NC
Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technician Aides to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materials-including soil, concrete, and masonry-in accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance with project specifications and documenting field results accurately and clearly. The position requires physical stamina, attention to safety protocols, reliable transportation, and the ability to obtain industry certifications such as ACI, ICC, and OSHA. Successful candidates will demonstrate a commitment to quality, safety, and professionalism while working in dynamic construction environments. Requirements Education: Engineering technicians must have a high school diploma or the GED high school equivalency credential. Certification: Engineering technicians will obtain and maintain relevant ACI, ICC, and OSHA certifications, as well as other certifications as deemed appropriate by their supervisor. Pre-employment Requirements: Drug Testing: All job applicants will undergo testing for the presence of illegal drugs as a condition of employment. All employees will follow Geo-Hydro Engineers' Drug Free Workplace Substance Abuse Policy. Driving Record: Engineering technicians will have a valid driver's license with no violations that prevent them from being insured through the company's insurance carrier. The ability to be insured is at the discretion of the company's insurance carrier. The insurance carrier routinely reviews employee's driving records and may determine at any time than any employee will no longer be permitted to operate any company vehicle. Job Responsibilities and Requirements: Observation: Engineering technicians must be able to observe construction work for compliance with applicable project drawings and specifications, and for general accordance with International Building Code requirements. Testing: Engineering technicians must be able to perform field and laboratory testing of soil, stone, concrete, grout, masonry, and other construction materials in accordance with ASTM standards. Applicable ASTM standards include but are not limited to the following: D-698, D-1557, D-1556, D-2937, D-2216, D-6938, C-31, C-143, C-173, C-231, and ASTM STP 399. Documentation: Engineering technicians document field observations and test results by writing legibly in English with proper grammar. Basic mathematics (addition, subtraction, multiplication, and division) is an integral part of all testing and reporting. Safety: Engineering Technicians must wear appropriate personal protection equipment (PPE), attend safety training sessions, and follow the requirements within the Geo-Hydro Safety and Health Manual. Physical Requirements Lifting: Must be able to lift, load and unload soil, sand, asphalt, CMU, and concrete samples weighing up to 100 pounds. Concrete Sampling and Testing: Must be able to maneuver a 6-cubic foot wheelbarrow loaded with 150-200 pounds of fresh concrete for up to 50 yards over uneven ground. Unit weight testing requires lifting a 50-pound container of concrete. Six-inch compressive strength test cylinders weigh 30 pounds each. Volumetric air content testing requires repeated swinging of the 30-pound concrete-filled test device from knee-level to head-level. Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel. Must be able to load and unload a 90-pound case containing a nuclear density gauge and carry the 50-pound nuclear density gauge by hand for up to 50 yards over uneven ground. Hand Auger and Penetrometer: Must be able to manually hand auger down to 10 feet into soil to obtain samples and perform portable dynamic cone penetrometer testing. The hand auger may require up to 50 pounds of pull to remove it from wet soil conditions. The total weight of the dynamic cone penetrometer ranges from 20 to 40 pounds. Operation of the penetrometer requires repeated raising and dropping of the 15 pound slide weight.
$53k-69k yearly est. 60d+ ago
Production and Supply Development Program-Engineering Associate
Syngenta Global 4.6
Engineering associate job in Greensboro, NC
About the program: The Production & Supply Development Program (PSDP) is a rotation-based program providing opportunities that expose associates to diverse experiences, with a total program commitment within three calendar years, and a geographical move as required. Locations are at any of the Crop Protection (CP) Production and Supply (P&S) sites within the United States - Greensboro, NC; Omaha, NE; St. Gabriel, LA. This position has a start date of June 2026. Applications are only open to students graduating between December 2025 and May 2026. Role Purpose The focus of the program is to establish a pool of highly motivated and well-rounded talent within the organization. As a PSDP Associate, you acquire business knowledge, skills and attributes required for placement into future positions within P&S at Syngenta. The learning and development will be at an accelerated pace with the expectation to perform at levels above your peers. What's in it for you? * A unique opportunity to grow and develop your capabilities * Exposure to diverse experiences in different geographic locations * Broad business exposure * Meaningful and challenging work * An understanding of career opportunities available at Syngenta that relate to your passion What will you be doing? There are multiple options to gain exposure to various areas of P&S that will help you develop your career path in a way that meets your individual needs. In addition to the individual technical knowledge gained, cross-functional leadership training, coaching and mentoring will be provided. Your assignments will support various chemical engineering functions throughout the organization, including: * Process Technology Development * Process Engineering * Production Engineering * Project Management * Production Start-ups * Formulation Development * Health, Safety and Environment
$66k-87k yearly est. 18d ago
Entry-Level Construction Materials Engineering Technician
S&Me, Inc. 4.7
Engineering associate job in Greensboro, NC
Do you like the idea of starting your day outdoors instead of at a desk? Do you take pride in hands-on work that makes a real impact on the success of a construction project? If so, a career as a Construction Materials Engineering Technician out of our Greensboro, North Carolina office might be exactly what you're looking for. As an Entry-Level Construction Materials Engineering Technician, you will receive the training and hands-on experience of how to test particular construction materials such as soil, concrete, asphalt, aggregate and more to ensure the project is built right. You'll be in the field helping ensure that the materials used to build everything from restaurants to stadiums meet the right standards for quality and safety. Your Day-to Day: * Start with Concrete: Begin with concrete testing and sampling, then move on to other materials like soils, asphalt, and masonry. * Train as You Go: Receive on-the-job training and certification support through the American Concrete Institute (ACI) and the International Code Council (ICC). * Work Outdoors Year-Round: Enjoy working outside in various weather conditions, with changing environments and different crews on different sites. * Testing and Reporting: Conduct and document tests on construction materials with precision. Ensure all laboratory and field equipment is well-maintained and properly calibrated. Collaborate with colleagues and work independently to ensure test results are logical, complete, and ready for review. * Inspections and Compliance: Perform inspections of construction materials according to the International Building Code (IBC) and serve as a Special Inspection agent per certifications and IBC requirements. Review project plans, record observations and test results, and use Metafield to organize data. What You Bring: * A High School diploma/GED * Eagerness to gain experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials * A valid driver's license and reliable transportation * A certification from any of the following is a plus: * American Concrete Institute (ACI): Field Testing Grade I, Strength Testing Technician, Laboratory Technician * A strong ability to communicate effectively in English (speaking, reading, and writing) * A basic understanding of math concepts related to weight, volume, pressure, and units of measurement Working Conditions and Physical Demands: Perform the physical demands of the position with the use of company-provide Personal Protective Equipment such as: * Working outdoors the majority of the time in varying weather conditions * Walking over rough, uneven terrain and standing for potentially up to 12 hours a day * Routinely lifting and carrying 40-50lbs, (field/laboratory samples and equipment) * Maneuvering field equipment safely, such as a loaded wheelbarrow, on uneven ground around active construction sites * Working outside normal business hours, including some weekends We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: * Medical, Dental & Vision Plans with HSA and FSA options * Wellness Program - $50 off per month on your 2027 premiums! * Pet Insurance * Term Life & Long-Term Care Coverage - available Spring 2026 * 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution * 401(k) Retirement Plan * Paid Holidays and Paid Time Off (PTO) - with rollover options * Paid Maternity & Paternity Leave * Mentorship & Career Development Programs * Credential Incentive Program - get rewarded for advancing your skills * Tuition Reimbursement * Employee Recognition Program * Company Vehicle & Fuel Card - for project-based roles * $2,000 Employee Referral Bonuses - and more! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted.
$53k-67k yearly est. 56d ago
Summer 2026 Post Market Engineering Internship
Cook Medical 4.4
Engineering associate job in Winston-Salem, NC
The Engineering CO-OP at Cook Winston Salem is a paid temporary assignment in Product Research, Production Engineering and/or Development Engineering that occurs generally during a school semester. All CO-OP positions provide hands on experience with meaningful projects in the medical device manufacturing industry. Responsibilities * Engineering CO-OPs may be involved in projects in the following areas: Equipment Application; Device Development; Manufacturing Support; New Technology Support and Development/ Process Control; Process Validation; Product Development; Quality Engineering; Project Engineering; Systems Support: Research and Technical Writing • Produce engineering deliverables/documents; Provide analysis of recommended solutions to any obstacles or problems during production• CO-OPs are assigned a direct mentor who provides a unique perspective of life at Cook. Mentors are chosen from Engineers and all mentors are responsible for guidance for their CO-OPs• Adhere to the Quality Management System and its processes to meet FDA 21 CFR 820, ISO 13485, and other applicable regulatory requirements• Must maintain all training requirements for the position, while seeking out opportunities for continuous development and growth Qualifications * College/University student entering Sophomore, Junior or Senior year the following Fall Semester or Graduate student enrolled in Engineering.• Minimum GPA of 3.0 is preferred.• All candidates must provide proof of enrollment in an accredited college or university Physical Requirements: * Works under general office environmental conditions• Sitting for extended periods, utilizes close visual acuity for working with computers, equipment, etc.• Experience recording and analyzing data and clearly expressing conclusions and recommendation in writing•Occasionally lifting with minimal exertion during shift• Personal protective equipment including safety glasses, lab coat and gloves may be required in some areas associated with this position "Qualified candidates must be legally authorized to be employed in the United States without any need for current or future visa sponsorship. Cook does not intend to provide sponsorship for employment visa status (e.g., H-1B or TN status) for this temporary position and will not consider candidates that have a future sponsorship need."
$54k-78k yearly est. 60d+ ago
Engineering Intern
Flexsteel 4.4
Engineering associate job in High Point, NC
PRIMARY FUNCTION: Responsible for assisting the engineering development of new product, processes, and procedures which result in better solutions that deliver high quality products to our customers while achieving personal and professional growth in the field of engineering. Primary functions include collecting data, design development, analyzing outputs, and determining corrective courses of action while promoting safety, quality, and efficiency within the business. The ideal candidate for this role will possess the following: Familiarity with analytical tools, such as flow charts, pareto charts, cause and effect diagrams, run charts, etc. Should be self-motivated and able to multi-task and prioritize workload to meet deadlines Should be solution-oriented and possess strong problem-solving skills Works well with cross-functional teams; is willing to learn and grow; exercises good judgment Familiarity with Lean Manufacturing is a plus Strong written and verbal communication skills Demonstrate flexibility and adaptability, while maintaining a positive attitude and approach to the position responsibilities Ability to work in a fast-paced environment and adapt to change quickly MAJOR DUTIES AND RESPONSIBLITIES Developing and implementing actions on opportunities to improve products and/or work processes Assisting in projects critical for long term strategic success Learning and employing the key principles of Lean to generate improvement Collaborate with cross-functional teams on continuous improvement events and analyze various databases in operational areas to develop projects focused on reducing production times, lead times, and inventory costs Determine methods for improving worker efficiency and reducing waste of materials and resources Establish standard of work and systems to monitor ongoing results and KPI's Collaborate with functional areas to develop and maintain performance metrics and methods
$27k-38k yearly est. 60d+ ago
Site Reliability Engineering Summer Intern
Archgroup
Engineering associate job in Greensboro, NC
With a company culture rooted in collaboration, expertise and innovation, we aim to promote progress and inspire our clients, employees, investors and communities to achieve their greatest potential. Our work is the catalyst that helps others achieve their goals. In short, We Enable Possibility℠. About This Internship Arch's internship program offers students a unique opportunity to gain hands on experience in the insurance industry. It provides challenging learning experiences that serve as a foundation for interns to explore their career choices and to develop professional skills. Working alongside some of the most talented members of the specialty insurance industry, interns will gain relevant expertise in various aspects of the field, participate in learning activities and receive ongoing feedback. About This Role Monitor and observe enhancements using tools like Dynatrace, Splunk, and Grafana. Work with OpenShift to manage containerized applications and infrastructure. Support CI/CD pipelines with GitHub and ArgoCD. Develop automation scripts and dashboards to improve system reliability and reduce manual toil. Participate in incident response simulations and postmortem analysis to learn best practices in reliability engineering. Gain hands-on experience with modern DevOps tools and practices, while collaborating with experienced engineers in a fast-paced, high-impact environment. Qualifications Actively completing an undergraduate in Computer Science, Software Engineering, or related program. Minimum 3.0 GPA or higher. College level - Junior or Senior student with graduation dates between December 2026 and May 2027. Completed coursework or experience in systems engineering, cloud infrastructure, or DevOps practices strongly preferred. Familiarity with Linux systems and container orchestration (e.g., Kubernetes/OpenShift) required. Exposure to Git-based workflows and CI/CD tools (e.g., GitHub Actions, ArgoCD) required. Experience with monitoring and logging tools such as Dynatrace, Splunk, or Prometheus preferred. Strong analytical and problem-solving skills Passion for automation, reliability, and scalable systems Entrepreneurial spirit along with the desire to be a continuous learner. Team player who collaborates effectively. Self-starter who can work independently and deal effectively with multiple tasks/priorities in a fast-paced environment. Location & Work Arrangement The program dates are June 1, 2026 - August 7, 2026. This position is classified as a hybrid position. You will work 2 days onsite and 3 days from home. This position is located in Greensboro, NC. Relocation and housing assistance is not provided for this role. Timeline Arch internship positions will be posted from August 2025 and will be unposted when filled. Pay For individuals assigned to or hired to work in Greensboro, NC, the hourly rate is $26-$28 as of the time of posting. The breadth in the range exists to accommodate students in specialized programs such as actuarial candidates and graduate students. Any actual rate offered will take into account a number of factors including but not limited to geographic location, scope & responsibilities of the role, along with the education & qualifications of the candidate. The above range may be modified in the future. Intern position is eligible for select Arch benefits. #LI-KK1 $25-$28 per hour Do you like solving complex business problems, working with talented colleagues and have an innovative mindset? Arch may be a great fit for you. If this job isn't the right fit but you're interested in working for Arch, create a job alert! Simply create an account and opt in to receive emails when we have job openings that meet your criteria. Join our talent community to share your preferences directly with Arch's Talent Acquisition team. 14500 Arch U.S. MI Services Inc.
$26-28 hourly Auto-Apply 12d ago
Engineering Lab Technician Asset Management
Stefanini Group 4.6
Engineering associate job in Greensboro, NC
Details: Stefanini Group is hiring! Stefanini is looking for an Engineering Lab Technician - Asset Management in Greensboro, NC For quick apply, please reach out to Allan Angeles Call: ************ / Email: *************************** Open for W2 candidates only! Work Location 7900 National Service Rd., Greensboro, NC 27409 Responsibilities The purpose of this position is to provide engineering support for FEATURES, VERIFICATION & VALIDATION (FVV) of product development. The engineering technician will work in the instrumentation lab and support internal engineers to achieve project milestones. The core focus of the department is to support validation activities for complete vehicles for the company. Accountabilities/Responsibilities Engineering technician in the instrumentation lab will perform following day to day activities: Check-in / check-out all equipment stored in the instrumentation lab Super user of internal asset management database system (IndySoft) Continuously tracking of equipment inventory Troubleshoot and verify equipment with reported issues Follow instrumentation procedures to support engineers and projects with equipment on time (Based on GHOST Request) Prioritize & understand calibration activities based on upcoming workload Interface with calibration and equipment vendors Manage storage location and labelling of test equipment Must be proficient working with computers and skilled in Microsoft Office suite Establishes and maintain well-defined relationship with engineering staff and other stakeholders Exceptional organizational skills and ability to manage multiple activities simultaneously The candidate must have a basic electrical knowledge including the items below Ability to perform soldering and knowledge of operating tools and equipment needed to perform required work Ability to read and update wiring diagrams Ability to repair wiring harnesses following documented schematics and data sheets Assemble connectors with including component per company standards Verify the functionality of instrumentation by following documented procedures Support internal 5S procedures to maintain a clean work environment Details: Associate degree in Electronics, Mechatronics or similar field 2-5 years of relevant experience Positive mind-set, great work ethic and a can-do attitude is required Demonstrated verbal and written communication skills Inventory management experience and/or skills is preferred Computer skills including use and application of Microsoft Office is necessary Ability to function well in teams is required Previous experience with data loggers and measurement sensors is a plus Listed salary ranges may vary based on experience, qualifications, and local market. Stefanini takes pride in hiring top talent and developing relationships with our future employees. Our talent acquisition teams will never make an offer of employment without having a phone conversation with you. Those face-to-face conversations will involve a description of the job for which you have applied. We also speak with you about the process including interviews and job offers. About Stefanini Group The Stefanini Group is a global provider of offshore, onshore, and nearshore outsourcing, IT digital consulting, systems integration, application, and strategic staffing services to Fortune 1000 enterprises around the world. Our presence is in countries like the Americas, Europe, Africa, and Asia, and more than four hundred clients across a broad spectrum of markets, including financial services, manufacturing, telecommunications, chemical services, technology, public sector, and utilities. Stefanini is a CMM level 5, IT consulting company with a global presence. We are a CMM Level 5 company. #LI-AA1 #LI-ONSITE
$31k-52k yearly est. Easy Apply 3d ago
Engineering Technician III
Nc State Highway Patrol
Engineering associate job in Pittsboro, NC
Agency Dept of Transportation Division State Hwy Administrator - Div of Hwys Job Classification Title Engineering Technician III (S) Number 60025520 Grade NC11 About Us It's the mission of the NC Department of Transportation to connect people, products and places safely and efficiently with customer focus, accountability, and environmental sensitivity to enhance the economy and vitality of North Carolina. We encourage you to consider joining NCDOT where our work not only serves the citizens of North Carolina but has an impact on our world through all modes of transportation. Description of Work This is a repost. Previous applicants must reapply to be considered. The Geotechnical Engineering Unit collects and analyzes subsurface information and provides geotechnical engineering designs and recommendations for roadways and structures. The Geotechnical Engineering Unit is looking for a Senior Driller in our Greenville Office. In this role you will: •Work as a member of a two-person crew performing subsurface soil and rock sampling and testing using rotary drill rigs and hand equipment. •Coordinate mobilization of equipment and materials to project sites and maintain records of materials and equipment utilization. •Perform light mechanical repair and maintenance on equipment. •Coordinate preventive maintenance and major repairs with local shop supervisors. •Operate and/or direct operation of rotary drilling and support equipment. •Be responsible for site safety by recognizing and correcting safety hazards or unsafe work conditions and leading or participating in daily safety briefings. •Communicate changes in subsurface conditions to the field professional based on response of the drilling rig. •Assist the field professional with sampling and measurements as necessary to complete field logging. •Select appropriate drilling equipment and method to advance and stabilize boreholes for sampling and testing such as Standard Penetration Test with an automatic hammer, undisturbed tube sampling, rock coring, and vane shear. Frequent overnight travel will be required for this position. A valid North Carolina Class A Commercial Driver's License is required for this position to mobilize drilling equipment. Applicant will be given 60 days to obtain a Class A CDL Permit and 90 days from the date of hire to obtain a Class A CDL Driver's License. Pre-employment drug testing will be required. As a condition of employment, a release form (ALCDRG-01) and a background statement (ALCDRG-06) must be completed and signed allowing the NCDOT to check with previous employers for the past two years about controlled substances and alcohol testing Knowledge Skills and Abilities/Management Preferences Salary Grade and Salary Range: NC11 $43,738 - $76,542 Management prefers applicants with the following: Demonstrated ability to operate various makes and models of drill rigs and perform various types of drilling/sampling [e.g., measurement while drilling (MWD), mud rotary, hollow stem auger, Standard Penetration Test (SPT) sampling, rock coring, in-situ sampling.] Demonstrated ability to recognize and correct safety hazards and/or unsafe working conditions. Demonstrated ability to select appropriate drilling methods for data and sample collection. Demonstrated ability to communicate changes in subsurface conditions to the field professional based on the response of the drilling equipment. Minimum Education and Experience Some state job postings say you can qualify by an “equivalent combination of education and experience.” If that language appears below, then you may qualify through EITHER years of education OR years of directly related experience, OR a combination of both. See the Education and Experience Equivalency Guide for details. Associate's degree in an applicable area of Engineering Technology, Survey Technology or a related curriculum from an appropriately accredited institution and three (3) years of progressive technician level experience; or an equivalent combination of education and experience. EEO Statement The State of North Carolina is an Equal Employment Opportunity Employer and dedicated to providing employees with a work environment free from all forms of unlawful employment discrimination, harassment, or retaliation. The state provides reasonable accommodation to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for religious beliefs, observances, and practices. Recruiter: Andriette Dana Clifton Email: ***********************************
$43.7k-76.5k yearly Auto-Apply 13d ago
Engineering Tech I
Primoris Power Solutions, LLC
Engineering associate job in Greensboro, NC
Job Description With over 70 years of operating experience, Primoris Power Solutions services include engineering and design, installation and maintenance, material and equipment procurement, repair of electrical transmission, distribution, substation, wireless communication, and storm restoration. Our experience ranges from small engineering and consulting projects to multi-million-dollar turn-key distribution, substation, and transmission line programs. The Engineering Tech I is an entry-level position with the purpose of using basic technical and design acumen in safe, reliable and value-added manner in utility construction projects, while supporting the Power Distribution Engineering team. The incumbent is required to demonstrate a basic understanding of a customer(s) design, workflow, safety and standard operating procedures. Perform detailed design and budgetary estimates. Accurately perform engineering calculations to assure safety and performance of equipment and systems. Promote efficient flow of information and ensure complete and accurate record keeping. Monitor work to ensure compliance with applicable engineering and construction codes. Responsible for distribution design and engineering in client's GIS and work management systems (WMS) as required. Perform other duties as assigned. Company Overview Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit ************* EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Agency Statement We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-AB1
$33k-58k yearly est. 2d ago
R&D Engineer
Amarr 4.4
Engineering associate job in Winston-Salem, NC
Are you looking for a new challenge within engineering? Maybe this job as a R&D Engineer in Winston Salem, NC is for you! Amarr, part of global opening solutions leader ASSA ABLOY, is searching for an experienced R&D Engineer to design and develop various systems and components related to residential garage doors. Assignments will be broad in nature, usually requiring initiative, originality, ingenuity and excellent problem-solving skills. Essential Functions: Product designer for major Pre Product Innovation (PPI), New Product Innovation (NPI), and Continuous Product Innovation (CPI) development projects. Work closely with internal and external company design, application and manufacturing engineering resources, designing with system-wide perspective. Lead, participate in or support the following product development activities: Concept, planning, design and execution stages of major new products or product enhancements Risk assessment Prototyping and testing concept designs and initial engineering builds Pilot Production Design reviews Design verification testing Product validation and usability testing Pre-production Create and release Product Requirements, Design Specifications and Design Descriptions for assigned projects. Regular review of the competitive market and products, including interfacing with customers, as well as current and future market needs. Interact with global and internal design and manufacturing resources to design for manufacturability, reliability and cost-effectiveness. Qualifications and Requirements: Bachelor's degree in Mechanical Engineering or related. 5-7 years minimum experience in the design and development of manufactured products Experience working in cross-disciplinary teams. Experience with roll formed and stamped thin gauge steel and molded/extruded plastic and rubber component design AutoCAD Inventor, Solid Works experience Experience with rapid prototype design and build for proof of concept and usability testing a plus. Knowledge in the selection of various materials and adhesives along with experience designing roll formed, extruded, and molded components and product assemblies are key areas that will set apart potential candidates. Benefits include Medical/Dental/Vision, Paid Time Off, Paid Holidays from day one, tuition reimbursement, and a 401k plan (with an automatic 3% company contribution, regardless of your contribution) among others. Our goal is to be a world-leading company that attracts diverse talent, where all team members feel safe being their true selves and are able to thrive in a work environment that promotes change, innovation, and provides equal access and opportunity. As one of North America's leading garage door manufacturers, Amarr Company takes pride in fostering a culture where employees enjoy many opportunities for career growth, rapid advancement, and relocation to some of America's most desired cities. Although Amarr Company is an international business, employees enjoy a family-oriented, caring culture and rewarding work environment. Amarr Company offers competitive wages, generous benefits, and a bonus program for every employee. At Amarr Company, the door is always open and there is no ceiling to your career growth. #amarrcareers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Amarr is an E-Verify participant.
$64k-79k yearly est. 14h ago
Intern - Test Automation Engineer
Labcorp 4.5
Engineering associate job in Burlington, NC
At Labcorp, we believe in the power of science to change lives. We are nearly 70,000 people across 100 countries who are harnessing science for human good. Our work combines unparalleled diagnostic laboratories, drug development capabilities and commercial innovations. Together, we fuel scientific breakthroughs and deliver more than 160 million medical test results that help guide treatment decisions, accelerate patient care and change lives. Join us in our pursuit of answers **.** **Labcorp 2026 Global Internship Program Exciting Internship Opportunity - Test Automation Engineer Intern!** Join Labcorp's 2026 Global Internship Program and take the first step toward a meaningful career in healthcare innovation! We're looking for motivated students to be part of a dynamic 12-week paid internship where you'll work on impactful projects and gain real-world experience, all while supporting our mission to improve health and improve lives. **Internship 2026 Dates: May 18, 2026 - August 7, 2026** **About the Program:** As a Labcorp intern, you'll be immersed in hands-on work that complements your academic background. In addition to your project work, you'll gain valuable exposure to Labcorp's global business, culture, and leadership through: + **Enterprise-wide learning experiences** that introduce you to key business functions across Labcorp + **Leadership exposure and visibility** , including direct interaction with senior leaders + **An immersive, in-person intern event June 2-4, 2026** designed to connect you with peers and deepen your understanding of our mission + **Senior leader speaker sessions** offering insights into strategy, innovation, and career growth + **Continuous opportunities to connect and grow,** from intern cohort communication channels and LinkedIn Learning resources to professional development sessions and storytelling opportunities that highlight your internship journey + **Connection to Labcorp's inclusive culture** through engagement with our **employee resource groups (ERGs)** and values-driven community initiatives + **Dedicated mentoring connections** to guide your growth, provide career advice, and support your internship journey **Internship Details** + **Duration:** 12 weeks, full-time + **Dates of Internship:** May 18, 2026 - August 7, 2026 + **Location: Remote** + **Eligibility:** Preferred candidates are rising juniors and seniors (Dec 2026 through June 2028 graduation) who are currently enrolled in a relevant degree program; however, all current students pursuing related studies are encouraged to apply. **Why Labcorp?** In 2025, we welcomed over 300 interns across our global offices. As part of the 2026 cohort, you'll join a diverse community of future leaders working to shape the future of diagnostics, biopharmaceutical lab services, corporate functions, and healthcare delivery. **Ready to make a difference?** Apply now to launch your career and create real impact for patients worldwide. **\#FutureofLabcorp** **Labcorp** has an opportunity for a talented student Software QA Engineer/Test Automation Engineer to join a motivated and productive team in delivering enterprise-level solutions. The student intern will continue to develop technical programming skills building test automation scripts for UI and API services using automation tools like Selenium, RestAssured and programming/scripting languages like Java/Python, etc. The student will perform manual testing to understand the application workflow and convert those into automated test scripts. Create and maintain automated test scripts in defined repository, integrate scripts into the continuous delivery pipeline and provide output reporting for test execution runs. Manage and organize test data and perform data analysis. **Education and Experience Requirements:** + Pursuing a Bachelor's degree (or higher) or equivalent in a technical (Engineering, Computer Science, etc.) or science related discipline. + Completed technical course work in computer science, software development, engineering or technical related field. + Ability to apply technical programming languages and scripting to validate software applications. + Ability to understand technical concepts and translate those into actionable programming functions. + Understanding of the technical aspects of software development lifecycle and processes. + Familiar with backend database platforms. + Support team members and engage with external teams to complete project deliverables. + This position is not eligible for visa sponsorship. **General skills (required):** + Strong communication skills, both written and verbal + Strong analytical skills and organizational skills + Comfortable working in a team setting + Experience automating various application types (mainframe, web-based, client/server, COTS, services, etc.). **Application Window: 1/23/26 - 2/6/26** **Pay Range: $22-$25/hr** All job offers will be based on a candidate's skills and prior relevant experience, applicable degrees/certifications, as well as internal equity and market data. **Benefits:** Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. Employees who are regularly scheduled to work a 7 on/7 off schedule are eligible to receive all the foregoing benefits except PTO or FTO. For more detailed information, please click here (************************************************************** . **Labcorp is proud to be an Equal Opportunity Employer:** Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. **We encourage all to apply** If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site (**************************************************** or contact us at Labcorp Accessibility. (Disability_*****************) For more information about how we collect and store your personal data, please see our Privacy Statement (************************************************* .
$22-25 hourly 4d ago
Engineering Technician
Butler Technical Group
Engineering associate job in Winston-Salem, NC
Pay Range: $20-25 ph (W2) Duration: 6 mos Performs moderately complex technical tasks which contribute to the planning and execution of engineering projects. May serve as a resource on varied tasks. Machining experience desired. ESPONSIBILITIES Works with engineers to build and test commercial aircraft seats and furniture Provides technical support to engineers on a variety of tasks. Confer with engineers on details and implications of test article build, test procedures and results. Machine small parts based on drawing. MINIMUM REQUIREMENTS: HS Diploma or Associate's degree (AA/AS) or equivalent from two-year college or technical school; and minimum 4 years related experience and/or training, or an equivalent combination of education and experience. Proficient with variety of hand tools Proficient with basic mechanical and manufacturing concepts. Excellent written and oral communication skills along with the ability to work in a team environment. Basic computer proficiency. Working knowledge of Microsoft Word & Excel. Working knowledge of engineering drawing interpretations. PREFERRED QUALIFICATIONS: Experience in a highly regulated industry, especially aerospace or automotive Experience working in a testing and quality assurance environment Well organized with solid judgment; able to multitask and adjust to changing priorities in a fast-paced environment. Knowledge and experience with 2D and 3D modeling software Demonstrated knowledge of metal machining and fabrication equipment Test Article Manufacture and Assembly Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.
$20-25 hourly 18d ago
Project Engineer
Agility Personnel 4.6
Engineering associate job in Burlington, NC
Job Description The Project Engineer oversees the planning and execution of small-scale electrical and mechanical projects, including estimating and tracking budgets. This role focuses on driving technical improvements in coordination with the Technical, Operations, and Strategic Projects teams. Responsibilities Lead and implement technical improvement projects within budget and timeline. Work with other departments and provide technical support as needed. Create and manage project charters with clear scope, tasks, and deadlines. Oversee project execution, including follow-up, documentation, and training. Use MS Office, CAD, and project management tools to complete tasks efficiently. Qualifications 2 to 3 years of experience in a Project Engineer role. Background in food processing or light industrial manufacturing is an advantage. Practical experience working with mechanical systems, pneumatics, hydraulics, electrical, and electronic components. Demonstrated ability to lead and manage project teams. Skilled in using CAD software, Microsoft Project, Excel, and PowerPoint. Well-versed in OSHA safety regulations and compliance standards. Bachelor's or Master's degree in Engineering, or equivalent technical training in electrical, electro-mechanical, or mechatronics disciplines. PMP certification is preferred; Lean Six Sigma Green Belt is considered an asset. Strong proficiency in written and spoken English. Additional language skills in Dutch, French, Spanish, or German are an advantage.
$62k-92k yearly est. 6d ago
Manufacturing Engineering Technician
Ingersoll Rand 4.8
Engineering associate job in Mocksville, NC
Manufacturing Engineering Technician BH Job ID: 3184 SF Job Req ID: 15519 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Technician Location: Mocksville, North Carolina (Onsite) Shift: 7:00am-4:00pm About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Ingersoll Rand Mocksville is looking for a Manufacturing Engineer Technician to assist their team of manufacturing engineers in special projects. This role will be a contributor to various projects throughout the plant and gain relevant knowledge to processes and procedures in a manufacturing environment. Responsibilities: * Learn and understand different manufacturing methods and processes * Evaluate current processes and make recommendations for improvement based on our guiding principles of Safety, Quality, Delivery, Inventory and Performance * Assist in Drop Zone Changes, BOM updates * Communicate with internal and external engineering functions effectively * Present and communicate information to peers and management * Lead or support Kaizen activities * Lead or support standardization initiatives * Drive Quality Improvements and efficiency improvements on production line * Interface with other internal groups or organizations Requirements: * Must be currently pursuing or currently hold a bachelor's in manufacturing engineering, industrial engineering, or mechanical engineering * 1+ years of experience with basic CAD/CAM software skills Core Competencies: * Leadership skills * Teamwork skills * Problem-solving skills * Good information technology skills * Excellent communication skills * Ability to work in a team environment and take initiative Preferences: * Must be currently pursuing or currently hold a master's in manufacturing engineering, industrial engineering, or mechanical engineering What we Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************
$38k-58k yearly est. 43d ago
Engineering Specialist (Flex Staff)
CDM Smith 4.8
Engineering associate job in Winston-Salem, NC
CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$78.6k-157.2k yearly 8d ago
Mechanical Engineer
Actalent
Engineering associate job in High Point, NC
Responsibilities Design and develop structures, subassemblies, and mechanical components of truck and trailer bodies or ambulances using CAD software such as Solid Edge, SolidWorks, or AutoCAD Inventor. Create detailed 3D models of sheet metal parts, assemblies, and manufacturing drawings with appropriate tolerances and material specifications. Perform engineering calculations and analyses (structural, load, and performance) to validate designs. Support production through technical drawings, BOMs, process documentation, and engineering change management. Collaborate cross-functionally with manufacturing, purchasing, and quality departments to ensure design intent is maintained through production. Review and improve existing designs for manufacturability, cost efficiency, and durability. Research materials, components, and manufacturing methods for potential implementation in future designs. Participate in prototype builds and testing to evaluate design performance and validate design changes. Ensure compliance with applicable safety, regulatory, and customer standards. Provide technical support for field issues and product improvement initiatives. Essential Skills Bachelor's degree in mechanical engineering or equivalent. 3-5 years of prior work experience within a manufacturing setting outside of college or internships. Proficiency in Solid Edge and SolidWorks. Knowledge of MS Office products (Word, Excel, PowerPoint, Outlook). Experience with Epicor ERP. Ability to responsibly handle confidential information. Additional Skills & Qualifications Strong understanding of mechanical design principles, fabrication methods, and structural analysis. Knowledge of materials (steel, aluminum, composites) and their applications in vehicle manufacturing. Understanding of structural adhesives and their uses. Ability to interpret engineering drawings, specifications, and standards. Strong problem-solving, analytical, and organizational skills. Excellent communication and teamwork abilities. Familiarity with manufacturing processes such as welding, forming, and assembly. Experience with Epicor ERP systems is a plus. Work Environment The work environment involves a manufacturing setting with exposure to weather, noise, and moving mechanical parts. The role requires a mix of desk work using CAD software and physical presence on the manufacturing floor. Physical demands include occasional lifting of up to 30 lbs and specific vision abilities. This company is an equal opportunity employer and provides accommodations upon request during the selection process. Job Type & Location This is a Permanent position based out of High Point, NC. Pay and Benefits The pay range for this position is $70000.00 - $80000.00/yr. Have copy of benefits to share. Workplace Type This is a fully onsite position in High Point,NC. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
$70k-80k yearly 3d ago
Production and Supply Development Program-Engineering Associate
Syngenta Group 4.6
Engineering associate job in Greensboro, NC
As a world market leader in crop protection, we help farmers to counter these threats and ensure enough safe, nutritious, affordable food for all - while minimizing the use of land and other agricultural inputs. Syngenta Crop Protection keeps plants safe from planting to harvesting. From the moment a seed is planted through to harvest, crops need to be protected from weeds, insects and diseases as well as droughts and floods, heat and cold. Syngenta Crop Protection is headquartered in Switzerland. Job Description About the program: The Production & Supply Development Program (PSDP) is a rotation-based program providing opportunities that expose associates to diverse experiences, with a total program commitment within three calendar years, and a geographical move as required. Locations are at any of the Crop Protection (CP) Production and Supply (P&S) sites within the United States - Greensboro, NC; Omaha, NE; St. Gabriel, LA. This position has a start date of June 2026. Applications are only open to students graduating between December 2025 and May 2026. Role Purpose The focus of the program is to establish a pool of highly motivated and well-rounded talent within the organization. As a PSDP Associate, you acquire business knowledge, skills and attributes required for placement into future positions within P&S at Syngenta. The learning and development will be at an accelerated pace with the expectation to perform at levels above your peers. What's in it for you? A unique opportunity to grow and develop your capabilities Exposure to diverse experiences in different geographic locations Broad business exposure Meaningful and challenging work An understanding of career opportunities available at Syngenta that relate to your passion What will you be doing? There are multiple options to gain exposure to various areas of P&S that will help you develop your career path in a way that meets your individual needs. In addition to the individual technical knowledge gained, cross-functional leadership training, coaching and mentoring will be provided. Your assignments will support various chemical engineering functions throughout the organization, including: Process Technology Development Process Engineering Production Engineering Project Management Production Start-ups Formulation Development Health, Safety and Environment Qualifications What you must have: Bachelor's degree in Chemical Engineering or Process Engineering with an emphasis in Chemical Synthesis or Formulation, Fill and Pack Prior Internship or Co-op experience in a manufacturing site Minimum GPA of 3.0 Willingness to relocate as needed to pursue rotational opportunities Valid driver's license Position requires being able to walk our production sites in any weather, including hot and humid, cold, and wet conditions Skills helpful for success: Process design and optimization - understanding and improving chemical processes for efficiency and effectiveness Chemical process modeling and simulation - using software tools to predict and analyze process behavior Data analysis and statistical methods - interpreting large datasets to make informed decisions Risk assessment and safety management - identifying potential hazards and implementing safety measures Equipment design and troubleshooting - selecting, sizing, and maintaining process equipment Experimental design and laboratory techniques - planning and conducting experiments to develop new products or processes What we value: Effective communication Comfort with ambiguity Initiative and follow-through Leadership and collaboration Additional Information What We Offer: A culture that celebrates diversity & inclusion, promotes professional development, and strives for a work-life balance that supports the team members. Offers flexible work options to support your work and personal needs. Full Benefit Package (Medical, Dental & Vision) that starts your first day. 401k plan with company match, Profit Sharing & Retirement Savings Contribution. Paid Vacation, Paid Holidays, Maternity and Paternity Leave, Education Assistance, Wellness Programs, Corporate Discounts, among other benefits. Syngenta has been ranked as a top employer by Science Journal. Learn more about our team and our mission here: ******************************************* Syngenta is an Equal Opportunity Employer and does not discriminate in recruitment, hiring, training, promotion or any other employment practices for reasons of race, color, religion, gender, national origin, age, sexual orientation, marital or veteran status, disability, or any other legally protected status. 3A #LI-DNI
$66k-87k yearly est. 17d ago
Engineering Technician CMT
Geo-Hydro Engineers 3.6
Engineering associate job in Greensboro, NC
Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technicians to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materials-including soil, concrete, and masonry-in accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance with project specifications and documenting field results accurately and clearly. The position requires physical stamina, attention to safety protocols, reliable transportation, and the ability to obtain industry certifications such as ACI, ICC, and OSHA. Successful candidates will demonstrate a commitment to quality, safety, and professionalism while working in dynamic construction environments. Requirements Education: Engineering technicians must have a high school diploma or the GED high school equivalency credential. Certification: Engineering technicians will obtain and maintain relevant ACI, ICC, and OSHA certifications, as well as other certifications as deemed appropriate by their supervisor. Pre-employment Requirements: Drug Testing: All job applicants will undergo testing for the presence of illegal drugs as a condition of employment. All employees will follow Geo-Hydro Engineers' Drug Free Workplace Substance Abuse Policy. Driving Record: Engineering technicians will have a valid driver's license with no violations that prevent them from being insured through the company's insurance carrier. The ability to be insured is at the discretion of the company's insurance carrier. The insurance carrier routinely reviews employee's driving records and may determine at any time than any employee will no longer be permitted to operate any company vehicle. Job Responsibilities and Requirements: Observation: Engineering technicians must be able to observe construction work for compliance with applicable project drawings and specifications, and for general accordance with International Building Code requirements. Testing: Engineering technicians must be able to perform field and laboratory testing of soil, stone, concrete, grout, masonry, and other construction materials in accordance with ASTM standards. Applicable ASTM standards include but are not limited to the following: D-698, D-1557, D-1556, D-2937, D-2216, D-6938, C-31, C-143, C-173, C-231, and ASTM STP 399. Documentation: Engineering technicians document field observations and test results by writing legibly in English with proper grammar. Basic mathematics (addition, subtraction, multiplication, and division) is an integral part of all testing and reporting. Safety: Engineering Technicians must wear appropriate personal protection equipment (PPE), attend safety training sessions, and follow the requirements within the Geo-Hydro Safety and Health Manual. Physical Requirements Lifting: Must be able to lift, load and unload soil, sand, asphalt, CMU, and concrete samples weighing up to 100 pounds. Concrete Sampling and Testing: Must be able to maneuver a 6-cubic foot wheelbarrow loaded with 150-200 pounds of fresh concrete for up to 50 yards over uneven ground. Unit weight testing requires lifting a 50-pound container of concrete. Six-inch compressive strength test cylinders weigh 30 pounds each. Volumetric air content testing requires repeated swinging of the 30-pound concrete-filled test device from knee-level to head-level. Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel. Must be able to load and unload a 90-pound case containing a nuclear density gauge and carry the 50-pound nuclear density gauge by hand for up to 50 yards over uneven ground. Hand Auger and Penetrometer: Must be able to manually hand auger down to 10 feet into soil to obtain samples and perform portable dynamic cone penetrometer testing. The hand auger may require up to 50 pounds of pull to remove it from wet soil conditions. The total weight of the dynamic cone penetrometer ranges from 20 to 40 pounds. Operation of the penetrometer requires repeated raising and dropping of the 15 pound slide weight.
$23k-32k yearly est. 60d+ ago

Learn more about engineering associate jobs

How much does an engineering associate earn in High Point, NC?

The average engineering associate in High Point, NC earns between $44,000 and $96,000 annually. This compares to the national average engineering associate range of $49,000 to $101,000.

Average engineering associate salary in High Point, NC

$65,000

$44,00010%

$65,000Median

$96,00090%

Job type you want

Full Time

Part Time

Internship

Temporary

Zippia Careers
Architecture and Engineering Industry
Engineering Associate Jobs
Locations
High Point, NC
Engineering Associate High Point, NC Jobs

Engineering associate jobs in High Point, NC - 161 jobs

Engineering Specialist (Flex Staff)

Mechanical Engineer

Engineering Aide - CMT

Production and Supply Development Program-Engineering Associate

Entry-Level Construction Materials Engineering Technician

Summer 2026 Post Market Engineering Internship

Engineering Intern

Site Reliability Engineering Summer Intern

Engineering Lab Technician Asset Management

Engineering Technician III

Engineering Tech I

R&D Engineer

Intern - Test Automation Engineer

Engineering Technician

Project Engineer

Manufacturing Engineering Technician

Engineering Specialist (Flex Staff)

Mechanical Engineer

Production and Supply Development Program-Engineering Associate

Engineering Technician CMT

Learn more about engineering associate jobs

How much does an engineering associate earn in High Point, NC?