Engineering associate jobs in Irvine, CA - 1,470 jobs

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Title : Product Development Engineer Provide solid technical skill and engineering support for design and development activities for new and existing products. Support current products in terms of quality, manufacturing, supply continuity and cost improvement. Participate in executing technical and/or cross-functional project work. Contribute to a culture of innovation by proactively generating novel concepts for new products and enhancements to current product performance. Understand customer needs through literature review, customer interviews, direct observation, competitive analysis, prototype evaluation, and clinical/simulated use studies. Translate customer needs into engineering requirements into specific product, packaging and process specifications. Engineer robust and manufactural products through strong understanding and application of engineering fundamentals. Develop and execute test methods which specify measurement equipment, test set-up, measurement systems analysis, and data analysis. Write detailed technical reports based on design verification analysis/testing for design changes and product design activities. Ensure compliance with BD quality policies, procedures and practices as well as with all local, state, federal and BD safety regulations, policies and procedures. BS degree in engineering is required (Mechanical or Biomedical Engineering preferred). 2-4 years of engineering experience is required in medical devices. Test, and/or improve products by developing moderately complex experiments and tests (including writing and executing protocols), analyze results, make recommendations, and develop reports, based on engineering principles Generate work instructions, test methods, engineering drawings/prototypes, etc. to establish/ characterize product and/or process specifications Create/update portions of design control documents including requirement specs and risk documents Assign R&D support tasks; gives instruction to technicians on conducting tests; train technicians and provide feedback; and coordinate technician work Identify, evaluate, manage, and provide guidance to suppliers, including establishing tolerances and defining acceptance criteria for suppliers •Good computer skills in usage of MS Office Suite; CAD experience preferred •Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills •Basic understanding of statistical techniques •Previous experience working with lab/industrial equipment required (if applicable) •Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering •Solid problem-solving, organizational, analytical and critical thinking skills •Solid understanding of processes and equipment used in assigned work •Strict attention to detail •Ability to interact professionally with all organizational levels •Ability to manage competing priorities in a fast paced environment •Must be able to work in a team environment, including the ability to manage vendors and project stakeholders •Ability to build productive internal/external working relationships

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. ABOUT THE TEAM Anduril's Lattice software platform integrates together many sensors into a single cohesive view of the world, providing needed context for our users. AI Engineers on Anduril's Frontier AI team build edge-compatible, generative AI systems into the Lattice software platform to provide features and products that improve autonomy and reduce cognitive burden on the warfighter. Specific applications include but are not limited to automating mission planning, battle-space understanding, voice-control of assets, and enabling higher-levels of autonomy. WHAT YOU'LL DO Distill and fine-tune transformer architectures so they can be deployed onto edge devices or compute denied environments Propose and prototype LLM-based Agentic systems that help solve real world problems, leveraging the latest state-of-the-art techniques in the field Develop and maintain mission relevant benchmarks Work cross-functionally with different business lines across Anduril to help discover and scope new research problems REQUIRED QUALIFICATIONS BS in Computer Science, Machine Learning, Electrical Engineering, or related field 5+ years experience developing and benchmarking ML algorithms Experience pushing and maintaining ML algorithms in production Strong Python skills with experience in ML frameworks such as PyTorch Eligible to obtain and maintain an active U.S. Secret security clearance PREFERRED QUALIFICATIONS Experience fine-tuning transformer-based model Experience deploying deep-learning based models to edge devices or air gapped environments Prior experience in defense tech or start-up US Salary Range $220,000 - $292,000 USD The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you. UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents. IE Roles: We offer an annual contribution toward your private health insurance for you and your dependents. Additional Benefits Income Protection: Anduril covers life and disability insurance for all employees. Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs. Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. Professional Development: Annual reimbursement for professional development. Commuter Benefits: Company-funded commuter benefits based on your region. Relocation Assistance: Available depending on role eligibility. Retirement Savings Plan US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options. UK & IE Roles: Pension plan with employer match. AUS Roles: Superannuation plan. The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. To view Anduril's candidate data privacy policy, please visit ********************************************** #J-18808-Ljbffr

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MANUFACTURING ENGINEER (MERLIN TURBOPUMPS & INJECTORS) As a Propulsion Manufacturing Engineer at SpaceX, you will utilize your knowledge, experience, and creativity to develop novel solutions at the cutting edge of turbopump and injector propulsion technology. You will work in a highly dynamic environment supporting critical engine hardware that will deliver satellites into Earth's orbit, ferry humans to and from the international space station, and ultimately extend humanity's reach beyond Earth and the moon. You will serve as the manufacturing process subject matter expert and be expected to provide input into the design and development of new and existing hardware to facilitate an aggressive manufacturing pace. Additionally, you will lead in developing manufacturing and test processes on one of history's most reliable bi-propellant rocket engine. RESPONSIBILITIES: Support day-to-day production of Falcon, Merlin engine sub-assemblies, and engine integration which includes manufacturing processes such as machining, welding, metal forming, pressure testing, precision cleaning, non-destructive testing, heat treatment, and advanced mechanical assembly Analyze recurring manufacturing discrepancies and their impact on hardware performance and lead multi-disciplinary teams on root cause analysis and corrective actions Develop new and evaluate existing manufacturing processes and equipment to reduce non-conformance frequency/severity and processing/manufacturing costs Provide subject matter expertise on multiple manufacturing processes and products and their impact on test and launch operations Identify and execute design-for-manufacturability design and process improvements which have system-wide improvements to the department Communicate and coordinate daily with supporting departments such as production, machining, maintenance, quality, and design engineering to ensure that quality hardware is delivered on time BASIC QUALIFICATIONS: * Bachelor's degree in an engineering discipline or STEM discipline * 1+ years of mechanical design and/or hands-on manufacturing experience (internship and project experience are applicable) PREFERRED SKILLS AND EXPERIENCE: Master's degree in mechanical, aerospace, materials, or industrial engineering. Experience designing work procedures and processes for critical aerospace hardware. Experience with aerospace welding systems (e.g. electron beam, TIG) Experience with non-destructive testing/non-destructive evaluation (e.g. fluorescent penetrant inspection, radiography, ultrasonic, etc.) Experience with metallurgical evaluation and testing Knowledge of metallic manufacturing techniques, processes, and equipment related to fastening, drilling, and automation CAD and DWG experience (NX & Teamcenter a plus) Production tooling design experience Geometric dimensioning and tolerancing (GD&T) experience ADDITIONAL REQUIREMENTS: This is a hands-on position that may require standing for up to 4 hours a day and working directly with hardware on the floor Must be comfortable stooping, bending, and standing Must be willing to work long hours and weekends when necessary COMPENSATION AND BENEFITS: Pay range: Propulsion Engineer/Level I: $95,000.00 - $115,000.00/per year Propulsion Engineer/Level II: $110,000.00 - $130,000.00/per year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short & long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation & will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law ITAR REQUIREMENTS: * To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to ************************.

Develops and improves manufacturing processes by studying product and manufacturing methods. Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators. Primary Responsibilities: • Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors. • Improves manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout. • Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes. • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements. • Prepares product and process reports by collecting, analyzing, and summarizing information and trends. . • Provides manufacturing engineering information by answering questions and requests. • Maintains product and company reputation by complying with government regulations. • Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service. • Maintains product and process data base by writing computer programs; entering data. • Completes design and development projects by training and guiding technicians. • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies. • Contributes to team effort by accomplishing related results as needed. Education: • Advanced Degree in Engineering or related discipline Must Haves: - Bachelors degree in a technical field - Strong technical background, strong communication and documentation - 1 year of experience (internship and or job related experience) - NEW GRADS ENCOURAGED TO APPLY - Must be ok with a fast-paced environment and open to OT or off-shift on occasion

We are seeking a skilled Mechanical Engineer to design and develop sheet metal enclosures and packaging solutions for PCB assemblies and power supplies used in military and aerospace applications. This role requires expertise in precision sheet metal design, thermal management, and ruggedized packaging that meets stringent military specifications and aerospace standards. Key Responsibilities Design and develop sheet metal enclosures, chassis, and packaging solutions for PCB assemblies and power supply units intended for military and aerospace applications. Create detailed 3D CAD models and 2D manufacturing drawings using industry-standard software, ensuring designs are optimized for sheet metal fabrication processes including forming, bending, stamping, and welding. Perform thermal analysis and design appropriate cooling solutions such as heat sinks, ventilation patterns, and thermal interfaces to ensure components operate within specified temperature ranges in harsh environments. Ensure all designs comply with relevant military standards (MIL-STD-810, MIL-STD-461, MIL-DTL-901) and aerospace specifications, including shock, vibration, EMI/EMC shielding, and environmental sealing requirements. Collaborate closely with electrical engineers to understand PCB layouts, component placement, connector requirements, and electrical grounding needs. Select appropriate materials and finishes that meet corrosion resistance, weight limitations, and durability requirements for the intended operating environment. Develop prototypes and coordinate with manufacturing teams and external vendors to ensure designs are manufacturable, cost-effective, and meet quality standards. Conduct design verification testing including shock, vibration, thermal cycling, and environmental testing. Support qualification and certification processes required for military and aerospace applications. Participate in design reviews, failure analysis, and continuous improvement initiatives. Required Qualifications Bachelor's degree in Mechanical Engineering or related field with 3-5 years of experience in sheet metal design for electronics packaging. Proficiency in 3D CAD software (SolidWorks, CREO, or similar) with strong understanding of sheet metal design principles and manufacturing processes. Knowledge of military specifications (MIL-STD) and aerospace standards applicable to mechanical design and electronics packaging. Experience with thermal analysis tools and understanding of heat transfer principles in electronic systems. Strong understanding of materials selection, particularly aluminum alloys, stainless steel, and specialty coatings for harsh environments. Familiarity with EMI/RFI shielding techniques and grounding requirements. Ability to read and interpret electrical schematics and PCB layouts. Experience with GD&T and creating detailed manufacturing drawings.

Keysight is on the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do. Our, award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. Responsibilities The Precision Meso-scale Technology Center (PMTC) exists to provide high precision mechanical solutions that enable the capabilities of Keysight's industry leading electronic measurement equipment. As a manufacturing engineer you will develop and sustain manufacturing processes utilizing cutting edge technologies to achieve micron level tolerances in precision machining, specifically turning. We are seeking a hands-on Manufacturing Engineer to support our precision machining operations, with emphasis on CNC Swiss Turning processes. This role is heavily focused on day-to-day shop floor support, working directly with operators and machines to solve production challenges, reduce downtime, and drive continuous improvement. This is not a research, management, or desk-only position-success requires practical machining knowledge, process troubleshooting, and strong collaboration with production staff. Responsibilities As a manufacturing engineer your duties will focus on manufacturing processes of machining (Swiss-type turning), deburring, cleaning, and inspection. Provide real-time troubleshooting and technical support on the production floor for CNC Swiss and conventional turning machines. Develop and maintain setup documentation, work instructions, and process sheets. Optimize machining processes for cycle time, tool life, quality, and cost. Collaborate with operators to address daily challenges in tooling, setups, and dimensional control. Support new product introductions, including process development, machine setup, and first-article documentation. Lead root cause analysis of production issues and implement effective corrective actions. Partner with quality and programming teams to ensure part conformity and efficient production flow Continuous improvement utilizing Lean Tools to analyze and optimize manufacturing processes to improve efficiency, reduce cycle times, and minimize waste and defects. Maintain a commitment to safe working environment and ensuring compliance with all relevant safety regulations. #LI-MO1 Qualifications • Bachelors in Mechanical Engineering, Manufacturing Engineering, or a related field. A Master's degree is a plus. • A minimum of 3-5+ years of applicable experience in precision machining, manufacturing and design (part design, product design, and/or process design). Direct, hands-on experience in a machining environment (shop floor process engineering, setup support, or machine troubleshooting). • Proficiency in developing and improving machining processes for Swiss turning operations, including CNC programming and related tooling. • Solid modeling or 3D CAD proficiency (Solidworks, Creo, Autocad, etc) • Proficiency in interpreting and applying Geometric Dimensioning and Tolerancing (GD&T) standards. • Experience implementing Lean, Six Sigma, DMAIC, and PDCA methodologies to enhance production processes and minimize defects. • Strong analytical and problem-solving abilities to troubleshoot technical issues and devise effective solutions in a fast-paced environment. • Excellent written and verbal communication skills, to include the ability to communicate technical information clearly to non-technical colleagues. Strong documentation skills with the ability to create clear, practical work instructions. • Ability to work in and/or lead diverse cross-functional teams • Strong mechanical aptitude • Excellent organizational and project management skills • Ability to prioritize day to day activities balancing immediate needs with long term project goals This is an on-site position-daily presence on the shop floor is essential. The role involves hands-on problem solving, not primarily academic research, project management, or remote data analysis. The role will be based in Rancho Santa Margarita, CA. (Orange County) Santa Margarita, California pay range: MIN $100,850.00, MIDPOINT $134,460.00 - MAX $168,080.00 Note: For other locations, pay ranges will vary by region This role is eligible for our Keysight Results Bonus Program US Employees may be eligible for the following benefits: Medical, dental and vision Health Savings Account Health Care and Dependent Care Flexible Spending Accounts Life, Accident, Disability insurance Business Travel Accident and Business Travel Health 401(k) Plan Flexible Time Off, Paid Holidays Paid Family Leave Discounts, Perks Tuition Reimbursement Adoption Assistance ESPP (Employee Stock Purchase Plan) Careers Privacy Statement ***Keysight is an Equal Opportunity Employer.*** Keysight Technologies Inc. is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other protected categories under all applicable laws.

Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Manufacturing Engineer - Satellite Structures As a Manufacturing Engineer specializing in Satellite Structures, you will lead project management activities while collaborating closely with customers and production teams to ensure program success. Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. Primary Responsibilities: Manage schedules, resources, and deliverables for complex composite manufacturing projects. Drive program execution from planning through delivery, ensuring alignment with customer requirements and budget. Support secondary activities in design, manufacturing, quality assurance, tooling, and materials as needed. Frequent customer communication/interaction Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer. Requirements B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. Knowledge of Advanced Fiber-Reinforced and/or Aluminum Honeycomb Composites and associated manufacturing methods. Ability to operate in a fast-paced environment and contribute immediately upon hire. Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee.) Salary Description $80,000 to $120,000

We Are: At Synopsys, we drive the innovations that shape the way we live and connect. Our technology is central to the Era of Pervasive Intelligence, from self-driving cars to learning machines. We lead in chip design, verification, and IP integration, empowering the creation of high-performance silicon chips and software content. Join us to transform the future through continuous technological innovation. You Are: You are a seasoned engineer with a passion for pushing the boundaries of technology. With 6 - 15 years of experience, you bring a wealth of knowledge in software architecture. You excel in C/C++ software development, digital simulation, compiler optimizations and your strong background in design patterns, data structures, and algorithms sets you apart. Your expertise in Verilog, SystemVerilog, coupled with your experience in Unix/Linux platforms, makes you a valuable asset. You are well-versed in developer tools like gdb and Valgrind. Your analytical and problem‑solving skills are top‑notch, and you are always eager to learn and explore new technologies. As a highly enthusiastic and energetic team player, you are ready to go the extra mile to achieve success. What You'll Be Doing: Designing, developing, and troubleshooting core algorithms for compiler. Collaborating with local and global teams to enhance runtime performance for verilog compiler. Engaging in pure technical roles focused on software development and architecture. Utilizing your knowledge of digital simulation flows and EDA tools to drive innovation. Leveraging your expertise in Verilog, SystemVerilog, and VHDL to develop cutting‑edge solutions. The Impact You Will Have: Driving technological innovation in chip design and verification. Enhancing the performance and quality of simulation tools used globally. Solving complex compiler optimizations problems to improve simulation performance. Collaborating with cross‑functional teams to achieve project milestones. Pioneering new software architectures that set industry standards. What You'll Need: Strong hands‑on experience in C/C++ based software development. Deep understanding of design patterns, data structures, algorithms, and programming concepts. Knowledge of ASIC design flow and EDA tools and methodologies. Proficiency in Verilog, SystemVerilog, and VHDL HDL. Who You Are: Highly enthusiastic and energetic team player with excellent communication skills. Strong desire to learn and explore new technologies. Effective problem‑solver with a keen analytical mind. Experienced in working on Unix/Linux platforms. Adept at using developer tools such as gdb and Valgrind. The Team You'll Be A Part Of: You will be part of the performance team in Digital Simulation. You will work closely with both local and global teams to drive technological advancements and achieve project goals. Rewards and Benefits: We offer a comprehensive range of health, wellness, and financial benefits to cater to your needs. Our total rewards include both monetary and non‑monetary offerings. Your recruiter will provide more details about the salary range and benefits during the hiring process. #J-18808-Ljbffr

Gray Construction is looking to add a Japanese Speaking Project Engineer - Food and Beverage to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Visa Sponsorship: This role is not eligible for visa sponsorship. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Our client, a private label manufacturer in the CPG foods space, is seeking a Packaging Engineer to join their growing team. This role will involve leading packaging design and development, supporting sourcing and procurement efforts, and managing packaging testing protocols. Term: Full Time/Permanent Location: City of Industry (onsite) Compensation: $90k - $120k/year Desired Qualifications: 3+ years of experience in a packaging engineering-focused role Experience designing flexible and rigid packaging elements Experience with testing protocols (ISTA, ASTM, similar) Experience in the food/beverage industry is a big plus Degree in Packaging Engineering, or similar

Job Title: Senior CAD/CAM Programmer - Aerospace & Defense Manufacturing On-site | Full-Time We are seeking an exceptional CAD/CAM Programmer with deep expertise in SolidWorks and Mastercam to support elite CNC manufacturing operations producing high-precision Aerospace and Defense components. This role supports critical programs for Boeing, Northrop Grumman, and Lockheed Martin, where accuracy, repeatability, and process discipline are non-negotiable. The ideal candidate thrives in a high-stakes, zero-defect environment, programming complex parts machined on large-scale CNC gantry machines with extremely tight tolerances and advanced materials. Key Responsibilities Develop, program, and optimize complex CNC machining operations using Mastercam for large-format gantry machines (3-, 4-, and 5-axis). Create and modify 3D models and manufacturing data in SolidWorks, ensuring full alignment with engineering intent. Translate Aerospace & Defense engineering drawings, GD&T, and specifications into robust, efficient CNC programs. Program for high-precision, tight-tolerance components, often ±0.0005" or tighter. Optimize toolpaths for accuracy, surface finish, tool life, and cycle time while maintaining strict quality requirements. Collaborate closely with Manufacturing Engineering, Quality, and CNC Machinists to ensure flawless execution. Support first-article development, prove-outs, and production ramp-ups. Apply best practices for fixture design, work holding, probing strategies, and in-process inspection. Ensure all programming meets AS9100, customer-specific, and internal quality standards. Troubleshoot machining challenges and continuously improve processes. Maintain organized documentation for programs, setups, and revisions. Required Qualifications 7+ years of CAD/CAM programming experience in Aerospace or Defense manufacturing. Expert-level proficiency in Mastercam (multi-axis, complex surfacing). Strong working knowledge of SolidWorks for part modeling and design interpretation. Extensive experience programming large CNC gantry machines. Proven success machining tight-tolerance, high-precision aerospace components. Deep understanding of GD&T, aerospace drawings, and inspection requirements. Experience with exotic and aerospace-grade materials (e.g., aluminum alloys, titanium, Invar, composites). Strong knowledge of cutting tools, feeds, speeds, and advanced machining strategies. Ability to work independently in a high-accountability, mission-critical environment. Preferred Qualifications Experience supporting programs for Boeing, Northrop Grumman, Lockheed Martin, or similar OEMs. Familiarity with probing systems, SPC, and CMM workflows. Experience with large, complex structural aerospace parts. Knowledge of post-processor customization and CNC control optimization. Background in lean manufacturing or continuous improvement initiatives. What We Offer Opportunity to work on cutting-edge Aerospace & Defense programs. A high-performance manufacturing environment with advanced CNC technology. Competitive compensation based on experience and expertise. Long-term stability supporting major defense and aerospace platforms. A culture that values precision, craftsmanship, and engineering excellence.

Extron is a leading developer and manufacturer of professional AV hardware and software solutions which serve the ever-changing needs of organizations around the world as they strive to better communicate. Each Extron product is carefully engineered to provide best-in-class performance, intuitive operation and exceptional reliability. At Extron, the passion for our products is evidenced by our company culture which encourages innovation and provides opportunities for individual career growth. Our teams develop and release over 100 new products a year and continue to grow our vast patent portfolio. Position Overview: The Manufacturing Engineer designs, develops, improves, and validates the manufacturing processes. Also provides support and training for manufacturing related activities to Production and other Team Members. Responsibilities include but are not limited to: Performs design, development, improvement of manufacturing processes including but not limited to: Perform production line capacity, efficiency and work analysis. Design and improve manufacturing process flows. Develops assembly/manufacturing work instructions and procedures. Design and improve manufacturing process flows. Develops assembly/manufacturing work instructions and procedures. Determines requirements for manufacturing and develops drawings for jigs and fixtures to aid in manufacturing electronic equipment. Identifies and implements improvements to manufacturing process, product cost, cycle time and quality based on evaluation of process and product performance data. Prepares Engineering reports along with the launch of new products from NPI into production. Conducts training on manufacturing methods, standards and activities. Support all manufacturing activities, domestic as well as overseas. Required Education and Experience: Bachelor's Degree in Industrial or Manufacturing Engineering or bachelor's degree in related discipline (electronics/mechanical/programming) with relevant experience. 0-3 years' experience working in a fast-paced Engineering environment. Strong electrical and programming knowledge. New graduates are welcome to apply. Experience using Microsoft tools including image editing software programs. Develop professional Engineering reports including introductions, conclusions, recommendations and data research. Ability to analyze and resolve technical problems from a simple to complex issue quickly and independently. Knowledge of manufacturing theory with ability to apply to practical applications. Can perform minor assembly activities on assembly or test systems. Software Experience or knowledge of C/C++, Python, LabVIEW, Microcontroller such as Arduino, Raspberry Pi and PLC (Programmable Logic controllers). Basic knowledge of Industrial Engineering principles. Ability to use AutoCAD, Inventor, and/or Solidworks desirable. Effective verbal and written communication skills that clearly lays out information and ideas. Ability to communicate in such a way to influence peers and management and communicate well cross-functionally in a professional manner. Salary range: $70,000-$80,000. Pay may vary depending on experience, qualifications, and other job-related factors.

The Electrical Manufacturing Engineer is responsible for maintaining the efficiency and effectiveness of all related manufacturing equipment & processes required to manufacture a high quality product costs in mind. RESPONSIBILITIES: • Primary responsibility is to provide Manufacturing Engineering support to resolve any manufacturing or related issues on sustaining and new products • Implement processes to increase improvements in all related manufacturing processes • Troubleshooting and technical support to address product issues and processes • Support the transition of products from development to volume production • Resolves production issues on the spot while ensuring design integrity allowing us to stay on schedule • Facilitate a close relationship with the engineering team during design, build, and test to provide design feedback • Determine schedule impacts for unforeseen design or process changes in production • Provide clear communication between the design engineering team and the production floor • Concerning product tooling, confer with engineering teams and suppliers to ensure efficient production methods and schedules • Utilize lean manufacturing tools; recommend improvements in production methods, standards, tooling, equipment, layout, procedures, product designs, and employee efficiency • Identify continuous improvement opportunities for yield, performance, and cost • Work with the design team in response to manufacturing problems, parts obsolescence, and minor requirement changes • Prepare and maintain documentation required to ensure efficient production PREFERRED SKILLS AND EXPERIENCE: BS degree in Electrical Engineering (Desired), Manufacturing Engineering, Mechanical Engineering or similar field or equivalent experience as an Engineer in these fields required 5+ years of experience in Electrical, Test, Manufacturing, Mechanical Engineering or similar field in Aerospace, Automotive, or Commercial industries; or 3 years with a Masters Degree Specific experience with printed circuit board assembly, electro-mechanical assembly, calibration and testing processes is desired Organization/planning, communication (oral and written), time management, conflict management, ability to manage stress, deadlines and work independently Software Knowledge: Microsoft Office, AutoCAD, SolidWorks. BENEFITS: AeroAntenna offers a great benefits package, included but not limited to 401K with company matching up and vacations. What we do: The company ( Now is a part of HEICO Corp .) is a leader in the design and production of high performance active antenna systems for critical defense applications, precision guided munitions, commercial aircraft and other commercial uses. Antenna types it makes include GPS, aircraft navigation and satellite communications antennas. Additional Information: • Job Site: 20732 Lassen Street, Chatsworth, CA 91311 • Mail Resumes To: ATTN: HR, AeroAntenna Technology, Inc., 20732 Lassen Street, Chatsworth, CA 91311 • eMail Resumes To: [email protected]

Local General Engineering Contractor seeks a Project Engineer for paving, grading, and underground projects. Ideal candidate should possess a minimum of 2 years of related project management and/or estimating skills. RESPONSIBILITIES: The Project Engineer is responsible for ensuring construction work complies with safety, specifications, cost guidelines, reporting requirements and field engineering activities for assigned projects. Major focus will vary depending on project needs and priorities. Maintains positive relationships with owners, community members and project team members. DUTIES: Able to perform all essential Project Engineer responsibilities. Attend and document project meetings. Set up and maintain electronic filing system as needed. Update and maintain all drawings, specifications and logs. Maintain a site-specific safety plan and pre-task planning process, including audits, meeting, training, etc. Review, analyze, and transmit submittals. Prepare and maintain submittal logs and procurement log. Perform expediting functions. Cost code and/or verify correct codes on time sheets. Code Accounts Payable workflows as assigned. Verify original estimate quantities for labor cost reports. Report quantities in place and maintain labor cost report. Prepare and document extra work orders. Review and assemble change order submittals and quantity surveys. Maintain record set drawings. Document punch list work. Complete other responsibilities as assigned. MINIMUM SKILLS: Bachelor's Degree in Construction Management or related field of study 2 years' work and field experience preferred. Construction related internship experience preferred. Basic understanding of construction cost accounting, estimating, and scheduling skills. Experience with HCSS, HeavyBid, Procore ideal, not required. Ability to read and understand plans and specifications. Effective organizational skills, strong work ethic, and eager to learn. Valid driver's license and reliable transportation.

Project Engineer - Bridge & Transportation Construction We are partnering with a leading heavy civil contractor specializing in transportation and bridge infrastructure to hire a Project Engineer to support the delivery of multiple bridge construction projects throughout the Los Angeles region. This is an excellent opportunity for an engineer looking to gain hands-on experience on complex bridge and structural transportation projects, while building a clear path toward Project Manager and senior leadership roles. Key Responsibilities Support the execution of bridge construction projects, including foundations, substructure, superstructure, and deck work Assist with project planning, scheduling, quantity takeoffs, and cost tracking Manage RFIs, submittals, change orders, and document control Coordinate with Superintendents, inspectors, designers, and subcontractors Track material procurement and subcontractor progress Assist with budget updates, forecasting, and monthly reporting Support quality control, safety compliance, and Caltrans/DOT documentation Participate in constructability reviews and preconstruction planning Required Experience & Qualifications 2-7 years of heavy civil construction experience, ideally on bridge or transportation projects Exposure to bridge structures such as piles, footings, columns, girders, decks, and falsework Experience on public works / Caltrans / DOT projects strongly preferred Bachelor's degree in Civil Engineering, Construction Management, or a related field Strong organizational and communication skills Ability to thrive in a fast-paced, field-driven environment Experience with Procore, Primavera, or similar construction software preferred Why This Opportunity Work on high-profile bridge projects across the Greater Los Angeles area Clear career progression toward Project Manager and Senior Project Engineer roles Exposure to large, complex transportation infrastructure programs Long-term project pipeline and job stability Competitive compensation and comprehensive benefits package

We are currently looking for a Cost Engineer (Cost Controls Engineer) for projects in the greater Los Angeles Area. We are looking for a person that is capable of developing a deep understanding of the project documents, including; the contract with the owner, subcontracts, cost reports and specifications. This person should feel comfortable navigating and working within accounting and project documentation software, be detailed oriented with experience in the construction industry. The position is directly accountable for the financial performance and reporting, document control and project controls on site. This position will integrate with the project controls team that focuses, project cost and quantity reports, schedule development, procurement, equipment efficiencies, document control, and as-builts preparation & coordination. Your role on the structures team will depend on your desires as well as strengths and previous experience. You will need to develop and maintain strong relationships with other project engineers and managers, subcontractors, suppliers, and owner representatives. Key Responsibilities: Work on-site to help solve problems that occur during construction Develop and maintain thorough understanding of the contract, focusing on cost control requirements Monitor project costs and Job Cost Report Analyze and forecast monthly Total Cost Projection reports Cost compilation and tracking of extra work, contingencies, allowances, issues Develop and maintain tracking spreadsheets and documents Identify and implement strategies for enhanced cost control and tracking methods Participate in document control and tracking such as submittals, RFI's, and change management Collaborate and interface with project teams to facilitate proper cost and extra work tracking and billings Establish and maintain strong, professional relationships with the project team members to ensure clear communication, alignment on project goals, and proactive issue resolution. Qualifications: Bachelor's Degree in Engineering, Construction Management, or Business preferred 2+ Years of Experience in highway or roadway construction projects in California. Experience dealing with engineering or construction cost controls Excellent organizational, team management, problem solving, motivational skills. Apply Here: ******************************************************************************* Benefits: Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. Company Vehicle or Vehicle Allowance Company Cell Phone or Allowance Flexible Spending Account (FSA)/Dependent Care FSA 401K with 8% Match Life insurance Employee Assistance Plan (EAP) Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D Paid time off Professional development assistance Work in a collaborative environment that fosters creativity, support and mutual respect. Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status

• Packaging support & testing: prepare and set up test requests for new materials/components; evaluate test reports; coordinate Greenpoint data requests. • Data & documentation: perform project data cleanup, maintain project files and LIMS/PLM inputs; ensure accurate documentation for transfers. • Sustainability & L4TF initiatives: support team efforts on sustainable materials, recyclability checks and L4TF data collection. • Project collaboration: follow up on action items, liaise with cross‑functional stakeholders (R&I, Supply Chain, Quality), and support implementation steps from concept to launch. • Supporting on diverse project work, including data gathering and follow-ups. • Assist in preparing and setting up test requests for new materials and components. • Perform data cleanup and organization for project documentation. • Coordinate requests for Greenpoint data and evaluate test reports to inform project decisions. • Contribute to L4TF initiatives, supporting sustainability efforts. • Gain real-time experience by actively participating in project development steps, from conception to implementation. Required: • Currently pursuing or recently completed degree in Packaging/Mechanical/Materials Engineering or equivalent. • Entry-level (0-1 year) technical support experience or academic project work. • Mandatory: Business-level English.

Kelly is hiring a Packaging Engineer I for one of our clients in El Segundo, CA $40.44/hr M-F 8am-5pm Temp (12 months) A Day in the Life As a Temp Packaging Engineer you'll report to the Director of Packaging Engineering for NYX and support the Consumer Products Division Operations packaging team at El Segundo. This role offers hands-on exposure to packaging development, testing, and sustainability initiatives. • Packaging support & testing: prepare and set up test requests for new materials/components; evaluate test reports; coordinate Greenpoint data requests. • Data & documentation: perform project data cleanup, maintain project files and LIMS/PLM inputs; ensure accurate documentation for transfers. • Sustainability & L4TF initiatives: support team efforts on sustainable materials, recyclability checks and L4TF data collection. • Project collaboration: follow up on action items, liaise with cross‑functional stakeholders (R&I, Supply Chain, Quality), and support implementation steps from concept to launch. • Supporting on diverse project work, including data gathering and follow-ups. • Assist in preparing and setting up test requests for new materials and components. • Perform data cleanup and organization for project documentation. • Coordinate requests for Greenpoint data and evaluate test reports to inform project decisions. • Contribute to L4TF initiatives, supporting sustainability efforts. • Gain real-time experience by actively participating in project development steps, from conception to implementation. We Are Looking For You're curious, organized, and eager to learn in a fast-paced packaging environment. Required: • Currently pursuing or recently completed degree in Packaging/Mechanical/Materials Engineering or equivalent. • Entry-level (0-1 year) technical support experience or academic project work. • Mandatory: Business-level English. Top 5 core skills (from L'Oréal Skills Library): Packaging & Materials Testing; Data & Documentation Management; Project Support & Organization; Sustainability Mindset (L4TF); Cross-functional Communication & Teamwork. What's In It For You • A place for you to leave your comfort zone and grow beyond your potential (here, you'll be encouraged to try new things and take risks!) • Real responsibility from day 1, there's no sitting on the sidelines at L'Oréal • An environment where people of every ethnicity, social background, age, religion, gender and sexual orientation as well as people with disabilities are accepted, can speak up, will thrive and are celebrated! • A place where you can contribute to something bigger! Many of our brands have societal /environmental causes to make concrete difference