Engineering associate jobs in Meridian, ID - 32 jobs

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: Mechanical Design Engineers involved in the quality of the features offered in our products are responsible for researching mechanical technologies to use in improving our motion control product offering and designing their manufacturing processes. They support the advanced product quality planning (APQP) processes in new product design and development, and engineering change notifications (ECN) for related manufacturing processes. They may interface with customers, and vendors to develop new manufacturing processes or modify existing processes that meet all specified customer requirements, including regulatory requirements. Responsibilities: Support and/or create new product designs for improved product reliability Make enhancements to existing product designs and related manufacturing processes Create prototypes and develop written test protocols Design manufacturing and test control apparatus and equipment Design quality and manufacturability into new products and production processes Analyze design trade-offs, conduct design reviews, solicit input Develop innovations to resolve technical issues Support the product planning and launch processes Develop and execute project scope, cost estimates, feasibility and schedules Communicate specifications for purchase of materials and equipment/tooling when necessary Other mechanical design engineering work as needed Requirements: Skills: Strong understanding of the current industry guidelines for designing, manufacturing, and testing Strong understanding of compliance, engineering standards, and certifications including knowledge of ISO standards and documentation Strong understanding of Advanced Product Quality Planning concepts (APQP) Solid understanding of 3D CAD design (SolidWorks experience) Familiar with assembly effects on runout and concentricity and how to minimize Familiar with deliverables such as rotor dynamics analyses Familiar with internal system foreign object debris (FOD) generation and how to minimize in design Familiar with high IP rated electro-mechanical device characteristics preferred Familiar with developing and delivering complete solutions Familiar with vendor qualification Strong technical writing skills Familiar with leading large projects Ability to communicate independently and effectively with all levels of management Persistence to meet schedules Advocates positive team concepts Good communication and organizational skills Qualifications: BS or MS degree in Mechanical Engineering, Technology, Physics or closely related field required 0-5 years' experience, with 3+ years quality engineering experience preferred Six Sigma or other lean manufacturing certifications preferred Coursework in Design for Manufacturability and/or Mechatronics a plus Willing to relocate to North Idaho required Able to travel domestically and abroad as projects require, but typically averaging 15% or less US citizenship or permanent work visa required Job Details: Full time with benefits Onsite position Salary DOE Essential Functions: Ability to wear Personal Protective Equipment (PPE) when required Use of upper body, arms, and hands throughout the day Lifting 10-20 pounds repeatedly throughout the day Bending, stooping, and reaching overhead throughout the day to reach materials to move or pickup Able to work regularly with epoxy, glues, sealants Company Benefits: Health insurance - 100% employee premium coverage with low deductible! Dental insurance Vision insurance Paid time off (vacation, sick leave, select holidays) 401(k) 401(k) matching Long Term Disability insurance Life Insurance Our company makes reasonable accommodations for individuals with disabilities who are otherwise qualified to perform a job unless such accommodations would impose an undue business hardship. Please let us know if you need an accommodation to participate in the application process. We can be reached by telephone at ************, by fax at ************, or email at accommodations@encoder.com. Please address correspondence to the HR Manager. Encoder Products Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Requirements The Industrial Engineer Intern will support the Nampa Engineering Project leads by assisting in the development of the plant engineering projects, project execution, equipment start-up, and commission. In this position you will be partnered with experienced degreed Engineering professionals. We will provide you with training and development to grow your career in Project Engineering in the Food and Beverage industry. You will learn the processes and procedures necessary to complete F&B engineering projects successfully from the ground up. Our regular weekly meetings and feedback sessions allow you to learn and develop as you grow. From your EXPERTISE to ours Key responsibilities for this position include: · Drive results through effective communication and relationship building. · Manage time effectively to ensure multiple deadlines are met amongst competing deadlines. · Maintain professionalism, composure, and resiliency during difficult situations. · Take accurate measurements of equipment, location, footprint, and food equipment system processes. · Create a statement of work document from information provided by Project Engineers. · Create/update AutoCAD equipment layouts, piping and instrumentation diagrams. · Assist with RFI's between contractors and project engineers, daily/weekly checkups and reporting of contractor's on-site performing work. · Assist with CAPEX process by ensuring purchase orders are made timely, shipments are tracked, inventoried or expedited as needed. · Assist with completion of punch list items and provide support to on-site contractors performing project work. · Maintain OSHA/GMP/Safety compliance with all contractors on site. From your STORY to ours Qualified applicants will contribute the following: Education · High School Diploma or General Education Development (GED) required. · Must be currently enrolled in a 2 or 4 year college or post graduate program. Experience · Prior CAD 2D/3D (AutoCAD, Solid Works) training on manufacturing equipment and facility layouts. · Prior food/beverage manufacturing experience preferred. Specialized Knowledge · Proficient in Microsoft office 365. · Proficient in Microsoft Excel Skills / Abilities · Ability to read, analyze and interpret P&ID's, building and electrical drawings preferred. · Ability to deliver and produce quality work within tight timeframes while managing multiple priorities simultaneously. · Ability to work with suppliers, trade partners, customers, and internal team members to discuss and document requirements/changes, address concerns and provide timely project status. · Ability to creatively solve problems and work under time pressures. At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career. Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities. Further, any division of the Company that is an Affirmative Action Employer will comply with all related legal obligations.

WHO WE ARE: Beyondsoft is a leading mid-sized business IT and consulting company that combines modern technologies and proven methodologies to tailor solutions that move your business forward. Our global head office is based in Singapore, and our team is made up of a diversely talented team of experts who thrive on innovation and pushing the bounds of technology to solve our customers' most pressing challenges. When it comes time to deliver, we set our sights on that sweet spot where brilliance, emerging technologies, best practices, and accountability converge. We have a global presence spanning four continents (North America, South America, Europe, and Asia). Our global network of talent and customer-centric engagement model enables us to provide top-quality services on an unprecedented scale. WHAT WE'RE ABOUT: We believe that collaboration, transparency, and accountability are the values that guide our business, our delivery, and our brand. Everyone has something to bring to the table, and we believe in working together with our peers and clients to leverage the best of one another in everything we do. When we proactively collaborate, business decisions become easier, innovation is greater, and outcomes are better. Our ability to achieve our mission and live out our values depends upon a diverse, equitable, and inclusive culture. So, we strive to foster a workplace where people have the respect, support, and voice they deserve, where innovative ideas flourish, and where people can unleash their brilliance. For more information regarding DEI at Beyondsoft, please go to ************************************** ADDITIONAL REQUIREMENT FOR REMOTE POSITIONS: For remote positions, all candidates must complete a video screen with our corporate recruiting team. Responsibilities POSITION SUMMARY: We are looking for an experienced Field Deployment Engineer to join our team to support one of top clients in [LOCATION TBD]. The engineer will directly work with client system engineers, local client logistics teams, and with other Field Deployment engineers remotely. Be responsible for deploying different types of robots to field, including preparation, data entry, data analysis, and post activities. This is a full-time, long term benefited position with competitive compensation WHAT YOU WILL BE DOING: Conduct regular risk assessments and provide recommendations for mitigating potential hazards Provide training and guidance to robotics operators, technicians, and other stakeholders on safe operating procedures and best practices Investigate incidents and near-misses, and develop corrective actions to prevent recurrence Collaborate with cross-functional teams to integrate safety considerations into robotics design, development, and deployment Service robotics equipment and ensure any issues are resolved in a timely manner to minimize downtime and maintain operational efficiency. Provisioning new robotics equipment and repositioning equipment across the data centers as needed. Enforcing tug utilization standards (how many racks = robotics needed) Pre-Deployment Phase Conduct site-by-site status assessments to ensure readiness for robotics deployment Develop and implement detailed project schedules by robotic type Create comprehensive training programs for operators, maintenance personnel, and supervisors Train operators on safe and efficient operation of new equipment Train personnel on equipment maintenance requirements and procedures Train supervisors on equipment operation, maintenance, and troubleshooting Introduce and deploy maintenance portal at each site with robotics Site Acceptance Testing Phase Collaborate with cross-functional teams to conduct site acceptance testing Identify and troubleshoot any issues that arise during testing Post-Deployment/Operationalization Phase Monitor and analyze key performance indicators (KPIs) such as: Equipment Utilization Rate Downtime, Maintenance Costs, Safety Incidents Throughput (original SAT vs operational in practice), Cycle Time (original SAT vs operational in practice) Vendor performance/Warranty (tracking of warranty work orders and estimated hours) Qualifications Bachelor's degree or higher in Computer Science, Computer Engineering, IT, or equivalent combination of education and experience Experience of Linux command line (at least understands basics) Basic ability to troubleshoot complex software / hardware configuration problems. Ability to function effectively in a fast-paced environment and manage continuously changing business needs; excellent time management skills required. PREFERRED QUALIFICATIONS: Experience of training program is a huge plus Any customer service skills is good to have Experience around safety programs is advantage Background in robotics-related tasks is preferred. DC/Server room experience is good to have WHAT WE HAVE TO OFFER: Because we know how important our people are to the success of our clients, it's a priority to make sure we stay committed to our employees and making Beyondsoft a great place to work. We take pride in offering competitive compensation and benefits along with a company culture that embodies continuous learning, growth, and training with a dedicated focus on employee satisfaction and work/life balance. A competitive pay range of $ 75,000 to $85,000 (depending on experience and location). 15 days per year of Paid Time Off (PTO). 8 paid holidays + 1 personal floating holiday 401(k) retirement plan with company match. Eligible employees (and their families) are offered the following company-sponsored benefits: Medical, dental, and vision insurance, health savings account (HSA), short-term and long-term disability, employee assistance plan (EAP), and basic life and AD&D insurance. Eligible employees (and their families) are offered the following voluntary employee-funded benefits: Health care flexible spending account, dependent care flexible spending account, commuter benefits, voluntary accident & critical injury coverage, voluntary long-term care coverage, and voluntary life and AD&D insurance. Beyondsoft provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type with regards to race, color, religion, age, sex, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, and the full employee lifecycle up through and including termination.

WHO WE ARE: Beyondsoft is a leading mid-sized business IT and consulting company that combines modern technologies and proven methodologies to tailor solutions that move your business forward.Our global head office is based in Singapore, and our team is made up of a diversely talented team of experts who thrive on innovation and pushing the bounds of technology to solve our customers' most pressing challenges.When it comes time to deliver, we set our sights on that sweet spot where brilliance, emerging technologies, best practices, and accountability converge. We have a global presence spanning four continents (North America, South America, Europe, and Asia). Our global network of talent and customer-centric engagement model enables us to provide top-quality services on an unprecedented scale. WHAT WE'RE ABOUT: We believe that collaboration, transparency, and accountability are the values that guide our business, our delivery, and our brand. Everyone has something to bring to the table, and we believe in working together with our peers and clients to leverage the best of one another in everything we do. When we proactively collaborate, business decisions become easier, innovation is greater, and outcomes are better. Our ability to achieve our mission and live out our values depends upon a diverse, equitable, and inclusive culture. So, we strive to foster a workplace where people have the respect, support, and voice they deserve, where innovative ideas flourish, and where people can unleash their brilliance. For more information regarding DEI at Beyondsoft, please go to ************************************** ADDITIONAL REQUIREMENT FOR REMOTE POSITIONS: For remote positions, all candidates must complete a video screen with our corporate recruiting team. Responsibilities POSITION SUMMARY: We are looking for an experienced Field Deployment Engineer to join our team to support one of top clients in [LOCATION TBD]. The engineer will directly work with client system engineers, local client logistics teams, and with other Field Deployment engineers remotely. Be responsible for deploying different types of robots to field, including preparation, data entry, data analysis, and post activities. This is a full-time, long term benefited position with competitive compensation WHAT YOU WILL BE DOING: * Conduct regular risk assessments and provide recommendations for mitigating potential hazards * Provide training and guidance to robotics operators, technicians, and other stakeholders on safe operating procedures and best practices * Investigate incidents and near-misses, and develop corrective actions to prevent recurrence * Collaborate with cross-functional teams to integrate safety considerations into robotics design, development, and deployment * Service robotics equipment and ensure any issues are resolved in a timely manner to minimize downtime and maintain operational efficiency. * Provisioning new robotics equipment and repositioning equipment across the data centers as needed. Enforcing tug utilization standards (how many racks = robotics needed) Pre-Deployment Phase * Conduct site-by-site status assessments to ensure readiness for robotics deployment * Develop and implement detailed project schedules by robotic type * Create comprehensive training programs for operators, maintenance personnel, and supervisors * Train operators on safe and efficient operation of new equipment * Train personnel on equipment maintenance requirements and procedures * Train supervisors on equipment operation, maintenance, and troubleshooting * Introduce and deploy maintenance portal at each site with robotics Site Acceptance Testing Phase * Collaborate with cross-functional teams to conduct site acceptance testing * Identify and troubleshoot any issues that arise during testing Post-Deployment/Operationalization Phase * Monitor and analyze key performance indicators (KPIs) such as: * Equipment Utilization Rate * Downtime, Maintenance Costs, Safety Incidents * Throughput (original SAT vs operational in practice), Cycle Time (original SAT vs operational in practice) * Vendor performance/Warranty (tracking of warranty work orders and estimated hours) Qualifications * Bachelor's degree or higher in Computer Science, Computer Engineering, IT, or equivalent combination of education and experience * Experience of Linux command line (at least understands basics) * Basic ability to troubleshoot complex software / hardware configuration problems. * Ability to function effectively in a fast-paced environment and manage continuously changing business needs; excellent time management skills required. PREFERRED QUALIFICATIONS: * Experience of training program is a huge plus * Any customer service skills is good to have * Experience around safety programs is advantage * Background in robotics-related tasks is preferred. * DC/Server room experience is good to have WHAT WE HAVE TO OFFER: Because we know how important our people are to the success of our clients, it's a priority to make sure we stay committed to our employees and making Beyondsoft a great place to work. We take pride in offering competitive compensation and benefits along with a company culture that embodies continuous learning, growth, and training with a dedicated focus on employee satisfaction and work/life balance. * A competitive pay range of $ 75,000 to $85,000 (depending on experience and location). * 15 days per year of Paid Time Off (PTO). * 8 paid holidays + 1 personal floating holiday * 401(k) retirement plan with company match. * Eligible employees (and their families) are offered the following company-sponsored benefits: Medical, dental, and vision insurance, health savings account (HSA), short-term and long-term disability, employee assistance plan (EAP), and basic life and AD&D insurance. * Eligible employees (and their families) are offered the following voluntary employee-funded benefits: Health care flexible spending account, dependent care flexible spending account, commuter benefits, voluntary accident & critical injury coverage, voluntary long-term care coverage, and voluntary life and AD&D insurance. Beyondsoft provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type with regards to race, color, religion, age, sex, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, and the full employee lifecycle up through and including termination.

Join the team that's shaping the future of autonomous robotics and material handling. As an R&D Software Engineer at Bastian Solutions, you'll develop the brains behind intelligent robotic systems, from low-level hardware control to high-level autonomy and perception. You'll work on real robots. You'll ship real code. You'll help launch entirely new automation products into warehouses and factories across the world. We don't just build software; we build the future of logistics. About Us Bastian Solutions R&D is the New Product Development (NPD) division of Bastian Solutions, a Toyota Automated Logistics company. Our mission is to develop original products that expand Bastian's automation capabilities - enabling our commissioning and systems teams to deliver integrated solutions that give our customers a competitive edge. Our ~70-person team is distributed between our Boise, Dallas, and Indianapolis offices, and includes experts in mechanical, electrical, software, and AI disciplines, all with a strong foundation in robotics technology. Beyond our Bastian offices, we collaborate heavily with our Toyota partners to innovate and share our technology globally. Software engineers on our team are true full-stack robotics developers, with opportunities to work across the entire software stack - from high-level autonomy, AI, and perception to low-level motor control, hardware interfaces, and everything in-between. We take products from concept to production-ready designs, and we execute our software on real robot hardware in live customer environments. Above all else, we know that our strength lies in our people. Through strong mentorship, thoughtful planning, and a supportive team culture, we create space for engineers to grow while maintaining a healthy work-life balance. Your Mission As a Software Engineer on our R&D team, you'll help architect and implement the software that enables our robots to think, move, and interact in the real world. You'll work closely with teammates across disciplines to build solutions that are both technically robust and practically deployable - from early design through to testing and real-world operation. You'll be expected to take strong ownership of your work. You'll have the opportunity to lead the design and implementation of software systems, while also engaging in pair programming, design processes, and code reviews that are core to our engineering culture. You'll get hands-on with real hardware and test your code on live systems. In this role, you won't just build software. You'll help shape how our systems behave in the real world, with the support of a team that values both innovation and thoughtful execution. Job Functions Contribute directly to Python and C++ codebases, running on Linux systems. Create software designs, host design and code reviews, and engage with SDLC processes. Engage in scoping, planning, and scheduling your work in an Agile workflow. Engage in, and help drive, best practices and SOPs for software development. Create test plans and engage in hands-on testing and verification on live Robots & Hardware. Uphold our safety standards when interacting with live equipment. Participate in field trials and customer on-site Beta deployments as we release new products. Work with other Bastian Solutions and TICO business units throughout the release process of R&D products (Manufacturing, Commissioning, Marketing, etc). Preferred Skills & Qualifications Bachelors Degree in Computer Science, Computer Engineering, or similar field Minimum 3 years of relevant experience Experience designing and implementing production software systems. Experience with Agile development environment and a strong drive for SOPs. Expert in Linux environment and developing for Linux systems. Expertise in Python and C++ Experience with other software technologies (Web Development, SQL, etc.) Experience with implementing microservice architecture Experience with CI/CD and testing methodologies and implementation. Experience with Containerization and Deployment Strategies. Experience with cloud technologies (Azure, AWS, etc.) Experience with GIT and GITFlow Exposure to machine learning concepts Exposure to ROS (Robot Operating System). Travel Requirements Up To 10% overnight travel (Travel expenses paid by Bastian Solutions) To learn more about us, click here - ******************************************* About Bastian Solutions Bastian Solutions, a Toyota Automated Logistics company, is an independent material handling and robotics system integrator providing automated solutions for distribution, manufacturing, and order fulfillment centers around the world. Our team specializes in consulting, system design, project management, maintenance, and installation, while sourcing the best equipment and automation technology. We take great pride in providing exceptional service and flexibility to our customers. In addition to exciting work at a growing company, we offer the following benefits: Health, Dental, and Vision Insurance 401(k) Retirement Plan with a company match Vacation/Holiday Pay Tuition Reimbursement Flexible Work Schedules Volunteer Work Professional Associations, Conferences and Subscriptions Company Meetings & Events Bastian Solutions does not work outside recruiting agencies. No solicitation phone calls please.

Join the team that's shaping the future of autonomous robotics and material handling. As an R&D Software Engineer at Bastian Solutions, you'll develop the brains behind intelligent robotic systems, from low-level hardware control to high-level autonomy and perception. You'll work on real robots. You'll ship real code. You'll help launch entirely new automation products into warehouses and factories across the world. We don't just build software; we build the future of logistics. About Us Bastian Solutions R&D is the New Product Development (NPD) division of Bastian Solutions, a Toyota Automated Logistics company. Our mission is to develop original products that expand Bastian's automation capabilities - enabling our commissioning and systems teams to deliver integrated solutions that give our customers a competitive edge. Our ~70-person team is distributed between our Boise, Dallas, and Indianapolis offices, and includes experts in mechanical, electrical, software, and AI disciplines, all with a strong foundation in robotics technology. Beyond our Bastian offices, we collaborate heavily with our Toyota partners to innovate and share our technology globally. Software engineers on our team are true full-stack robotics developers, with opportunities to work across the entire software stack - from high-level autonomy, AI, and perception to low-level motor control, hardware interfaces, and everything in-between. We take products from concept to production-ready designs, and we execute our software on real robot hardware in live customer environments. Above all else, we know that our strength lies in our people. Through strong mentorship, thoughtful planning, and a supportive team culture, we create space for engineers to grow while maintaining a healthy work-life balance. Your Mission As a Software Engineer on our R&D team, you'll help architect and implement the software that enables our robots to think, move, and interact in the real world. You'll work closely with teammates across disciplines to build solutions that are both technically robust and practically deployable - from early design through to testing and real-world operation. You'll be expected to take strong ownership of your work. You'll have the opportunity to lead the design and implementation of software systems, while also engaging in pair programming, design processes, and code reviews that are core to our engineering culture. You'll get hands-on with real hardware and test your code on live systems. In this role, you won't just build software. You'll help shape how our systems behave in the real world, with the support of a team that values both innovation and thoughtful execution. Job Functions * Contribute directly to Python and C++ codebases, running on Linux systems. * Create software designs, host design and code reviews, and engage with SDLC processes. * Engage in scoping, planning, and scheduling your work in an Agile workflow. * Engage in, and help drive, best practices and SOPs for software development. * Create test plans and engage in hands-on testing and verification on live Robots & Hardware. * Uphold our safety standards when interacting with live equipment. * Participate in field trials and customer on-site Beta deployments as we release new products. * Work with other Bastian Solutions and TICO business units throughout the release process of R&D products (Manufacturing, Commissioning, Marketing, etc). Preferred Skills & Qualifications * Bachelors Degree in Computer Science, Computer Engineering, or similar field * Minimum 3 years of relevant experience * Experience designing and implementing production software systems. * Experience with Agile development environment and a strong drive for SOPs. * Expert in Linux environment and developing for Linux systems. * Expertise in Python and C++ * Experience with other software technologies (Web Development, SQL, etc.) * Experience with implementing microservice architecture * Experience with CI/CD and testing methodologies and implementation. * Experience with Containerization and Deployment Strategies. * Experience with cloud technologies (Azure, AWS, etc.) * Experience with GIT and GITFlow * Exposure to machine learning concepts * Exposure to ROS (Robot Operating System). Travel Requirements * Up To 10% overnight travel (Travel expenses paid by Bastian Solutions) To learn more about us, click here - ******************************************* About Bastian Solutions Bastian Solutions, a Toyota Automated Logistics company, is an independent material handling and robotics system integrator providing automated solutions for distribution, manufacturing, and order fulfillment centers around the world. Our team specializes in consulting, system design, project management, maintenance, and installation, while sourcing the best equipment and automation technology. We take great pride in providing exceptional service and flexibility to our customers. In addition to exciting work at a growing company, we offer the following benefits: * Health, Dental, and Vision Insurance * 401(k) Retirement Plan with a company match * Vacation/Holiday Pay * Tuition Reimbursement * Flexible Work Schedules * Volunteer Work * Professional Associations, Conferences and Subscriptions * Company Meetings & Events Bastian Solutions does not work outside recruiting agencies. No solicitation phone calls please.

Job Description The Mechanical Engineer is responsible for a range of activities related to the design, development, implementation, and maintenance of engineering projects in accordance with best engineering practices. The Mechanical Engineer is also responsible for improving and updating production prints, developing standard work instructions, reviewing the work of Designers and Drafters, and working closely with the production team to ensure the proper information is available for them to successfully complete their required tasks. Essential Responsibilities Evaluates, designs, and develops changes to plans for existing machines to improve designs, correct problems, or improve machine performance and quality Runs engineering computations and stress analysis for components and structures Creates standard work instructions that provide the production associates with a roadmap of how to meet production requirements effectively and efficiently Develops and suggests product improvements Researches components to determine the best quality and price Assists in concept development of new machines or components according to best engineering practices Reviews work of Designers/Drafters to ensure changes are structurally sound Researches and understands competitor features and improvements Interfaces with customers and dealers as needed for technical resources Concept generation and general arrangement creation for special customer requirements Maintains necessary and required documentation Understands and follows all Diamond Z Safety policies and procedures Perform other tasks as assigned or needed Additional Responsibilities Assists with special projects Travel to job sites, trade shows, or customer locations as needed Participate in cross-functional meetings to promote a team environment Requirements Previous experience in a manufacturing or construction environment is preferred Ability to communicate bilingually is preferred Ability to function in a production environment and communicate comfortably with associates in all levels of the organization Ability to work independently with little management supervision to complete given tasks, activities, and assignments Must have strong decision making and problem solving skills Have prior experience with writing and implementing policies and procedures Excellent knowledge of potentially hazardous materials or practices Excellent report writing skills with the ability to communicate complex information clearly Excellent written and verbal communication skills Proficient with Windows and MS Office Experience with steel fabrication and terminology is a plus Ability to occasionally travel Benefits Qualification Requirements: Bachelor's degree in engineering A minimum of 5 years experience in the industrial grinder industry Proficiency with 3D CAD software, SolidWorks preferred Ability to function in a production environment and communicate comfortably with associates in all levels of the organization Proficient with Windows and MS Office Experience with steel fabrication and terminology is a plus Ability to occasionally travel Working Conditions The Mechanical Engineer will generally work in a controlled climate office environment but will also frequently be in a shop and yard environment with possible exposure to the elements and other hazards.

About the Role: The Mechanical Design Engineer is a hands-on engineering role focused on the design, development, and support of food processing equipment and custom machinery. This position requires strong machine design experience with augers, mixers, conveyors, and power transmission systems, as well as the ability to work within established processes while contributing to long-term improvements. The role also involves mentoring junior engineers and supporting manufacturing through the full equipment lifecycle. Responsibilities: Design and develop mechanical systems and food processing equipment including augers, mixers, belt conveyors, chain and sprocket drives, and related assemblies using SolidWorks. Apply mechanical engineering principles to machine design, equipment development, and custom project execution. Perform mechanical analysis including load calculations, stress and strain evaluation, and component sizing to ensure safe and reliable designs. Create, document, and release detailed engineering drawings, assemblies, bills of material, and purchased part specifications. Support manufacturing activities from design through fabrication, assembly, testing, and commissioning. Collaborate with manufacturing, purchasing, and suppliers to ensure designs are practical, manufacturable, and aligned with project timelines. Apply knowledge of food manufacturing equipment, sanitary design principles, and good manufacturing practices in all designs. Work effectively within existing procedures while helping identify and implement future design and process improvements. Mentor and support junior engineers and designers through technical guidance and hands-on knowledge sharing. Qualifications: Bachelors degree in Mechanical Engineering or equivalent practical experience in machine design and manufacturing. 5 or more years of mechanical engineering experience in machine design, industrial equipment, or food processing environments. Demonstrated experience designing food processing machinery such as augers, mixers, conveyors, and power transmission systems. Strong working knowledge of hydraulics, pneumatics, vacuum systems, and mechanical power transmission. Proficiency in SolidWorks for 3D modeling, assemblies, and production drawings. Working knowledge of machining, welding, sheet metal fabrication, forming, and mechanical assembly processes. Understanding of food manufacturing requirements, sanitary design principles, and regulatory standards. Strong problem-solving ability, sound engineering judgment, and the ability to work independently from written or verbal requirements. Clear communication skills and the ability to work effectively across engineering, manufacturing, and operations teams. Desired Qualifications: Experience designing equipment for protein or meat processing applications. Prior experience mentoring or training junior engineers or mechanical designers. Familiarity with MRP or ERP systems in a manufacturing environment. Experience supporting custom equipment projects from concept through production and installation. Demonstrated commitment to continuous improvement and practical, shop-floor-driven design solutions.

Job DescriptionOur Ideal Candidate As the ideal candidate you will take professional pride in providing top notch structural engineering solutions for the commercial, industrial, healthcare, multi-family residential and higher education sectors. You will work with a variety of materials allowing you to quickly gain experience and knowledge to produce quality work in a supportive and fun team environment. About BHB BHB is the first firm called for structural engineering consultation. In business for over 20 years, our work environment is fun, fast paced, and challenging, with weekly in-office training and a clear path for personal advancement. Our team focuses on responsiveness, coordination, and creativity. We do this by producing well-coordinated, high quality structural drawings and are proud of our unmatched customer service. BHB Benefits To attract the best people our salary/benefit package is second to none. Besides a Competitive Salary, some of the areas that set us apart are: Our career development paths and opportunities for progression Hybrid, remote and flexible work schedule possibilities Overtime compensation/bonus is paid to all employees Profit sharing Automatic employer 401(k) contribution 100% Health, dental, group life, short-term, and long-term disability insurance Expanded EAP available for physical, mental, social and financial health Paid Parental Leave Responsibilities Perform structural calculations for concrete, steel, wood, and masonry structures Structural model using computer-aided design software (Revit, RAM, etc.) Redline structural drawings, details, and schedules. Interpret building codes & material codes Collaborate with teams both internally & externally Applicant Requirements Concrete, steel, and wood college course work or design experience Minimum 3+ years of building design experience EIT Certification Bachelor's Degree in Civil Engineering (Emphasis in Structural Engineering) Master's Degree in Civil Engineering (Emphasis in Structural Engineering) is strongly preferred. Communicate well with team members Experience with RAM, RISA, REVIT, AutoCAD and Excel helpful. Powered by JazzHR xud U9dCyDG

General Job Description: Under the supervision of the Sales Manager, with indirect supervision and daily instruction from an assigned Project Manager(s), this position is responsible for the coordination of all technical activities on assigned projects. This position helps to ensure effective communication and coordination between all disciplines and all other project team members, including external customers and vendors. In this role, you will work on exciting, multi-million dollar commercial MEP projects as you continue to develop your skills in estimating, scheduling and design within the design-build construction process. Supervises: None Essential Duties & Responsibilities: Assist Project Manager with managing internal department relationships (i.e. accounting, purchasing, engineering, construction, fabrication shops, legal, etc.). Collaborates with the Purchasing Department regarding scope, price, submittals and delivery for purchased items. Coordinate installation procedures among Engineering, Construction, and other stakeholders. Manage job progress onsite as required, including leveraging your design expertise in a hands-on capacity to solve emergent operational and installation challenges. Oversee and/or process daily administrative items (i.e., Document Control, RFIs, Dailies, POs, MOPs, submittals, procurement logs, etc.) per Project Manager's direction. Coordinate project personnel activities to ensure the project progresses on schedule and on budget. Plan the work, track labor, track material and deliveries, project cost at completion. Escalate potential problems and assist the Project Manager in driving the solutions to their complete resolution. Maintain, develop and grow viable relationships with customers, prime contractors, trade partners, subcontractors, suppliers and trade personnel by: Attending job kick off, job progress, foreman, and OAC meetings. Interface with installers, suppliers and subcontractors to provide information, direction and detailed instructions. Managing subcontractors to meet our expectations of the project. Other tasks and duties as assigned by supervisor and/or upper management. Position Requirements (Skills, Work Experience, Education, Certifications, Licenses, etc.): BS in Engineering; Construction Management, or related field. Concentration in Mechanical Engineering is preferred, or 3-5 years of industry experience or a combination of experience and education High sense of integrity, business ethics & professionalism Strong organizational and time management abilities. Proficiency and proven success in interpersonal relationship building skills and positive customer service interactions. Excellent oral and written business communication skills, including the ability to listen and follow directions. ACCO Competencies: Proactivity / Initiative: Recognizes and anticipates what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision. Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity. Insight: The ability to gather and make sense of information that suggests new possibilities. Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people. Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner. Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success. Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals takes responsibility, and shows personal humility. Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feedback; demonstrating an openness to learning and change. Problem-Solver: Ability to identify, analyze, and solve a problem in support of personal, group, department, or organizational objectives. Physical Requirements: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) While performing the duties of this job, the employee is regularly required to: Sit and stand; use hands and fingers to operate computer, tablet, keyboard and/or telephone; grasp, handle and/or feel; reach with hands and arms; talk and hear. Walk and stand; climb and balance; stoop, kneel, crouch, or crawl (for purposes of assisting with project job walks and site inspections). Lift, push, pull, carry, and/or move up to 10 pounds, and occasionally up to 30 pounds. Specific vision abilities required by this job include Close vision and Distance vision. Maintain regular and routine attendance. Hours: This is a non-exempt position. Workdays are scheduled from Monday through Friday. Typically, work hours begin and end between 6:00am and 5:00 pm as scheduled with the position's supervisor. Occasional overtime may be necessary per business needs. Travel: As required from time to and from the assigned office location to regional branch offices and/or to project/customer site(s). #ACCO #LI-RN1

About us: At Plexus, our vision is to help create the products that build a better world. Driven by a passion for excellence, we partner with leading Aerospace/Defense, Healthcare/Life Sciences and Industrial companies to design, manufacture and service some of the world's most transformative products, including advanced surgical systems, diagnostic instruments, healthcare imaging equipment, mission critical aerospace systems, and electric vehicle (EV) charging solutions. Visit Plexus.com to learn more about our unwavering commitment to our vision. When we invest in our people, we invest in building a better world. With a vision rooted in the wellbeing and inclusive engagement of our team members, our customers, their end users and our communities, people are the heart of what we do and who we are. It is our values that unite us and guide us in everything that we do, including how we operate, behave and interact to foster a workplace where every team member feels valued and empowered to contribute their best. Our values include: Growing our People, Building Belonging, Innovating Responsibly, Delivering Excellence and Creating Customer Success. As a team member, you will engage in impactful work through global collaboration and the use of emerging technologies, join an inclusive culture where every team member is valued and working toward a greater purpose, and be empowered to reach your full potential through various development programs designed to accelerate your growth. Plexus offers a comprehensive benefits package designed to support team members' wellbeing, including medical, dental, and vision insurance, paid time off, retirement savings, and opportunities for professional development. We also prioritize work-life balance and offer a variety of perks to enhance the team member experience. For more information, visit our US benefits website at usbenefits.plexus.com. Our commitment to pay range transparency fosters an equitable workplace, where everyone can feel valued. The annual compensation range for this position is stated below. The salary offered within this range will be based upon the geographic location, work experience, education, licensure requirements and/or skill level. Salary Range: $70,300.00 - $105,500.00 Purpose Statement: This role is responsible for maintaining equipment, validating processes, managing technical communication for products, designing and optimizing new product processes, and overseeing assigned manufacturing processes while adhering to quality, delivery, and cost targets. Key Job Accountabilities: Develops Manufacturing solutions / Provide services that are high-quality, cost-appropriate, and satisfy the customer's requirements while establishing an area of technical specialty and mentoring others on the team (in-discipline). Utilizes appropriate tools and equipment to perform necessary work including creation, analysis, and verification. Demonstrates expertise in multiple phases/ processes of the full Plexus Manufacturing process/ product Requirements & Specifications as it applies to their role. Demonstrates the ability to work independently within at least one phase/ process for the Manufacturing Process/ Product, without direction from mentors or functional management, as it applies to their role. Produces comprehensive project documentation in accordance with the quality and change management procedures and guidelines, as it applies to their role. Education/Experience Qualifications: A minimum of a Bachelor's degree in Engineering or Science is required; a Bachelor's degree in Engineering or higher is preferred. Minimum Three (3) years of related experience is required. An equivalent combination of education and experience sufficient to successfully perform the key job accountabilities may be considered. Other Qualifications: Intermediate Computer Skills Intermediate Decision Making, Problem Solving Skills Intermediate Verbal and Written Communications Skills Strong Analytical and statistical analysis Skills; Statistical Process Control Software Skills Proactive and Basic Cross-Discipline Development Knowledge Understand Structured Design Ability to develop good working relationships with team members and customers Lab tool/ test/measurement equipment experience preferred Physical Requirements: N/A Travel Requirements: N/A This document does not represent a contract of employment and is not intended to capture every possible assignment the incumbent could be asked to perform. We are pleased to provide reasonable accommodations to individuals with disabilities or special requirements. If you need an application accommodation, please contact us by email at *****************. Please include your contact information and clearly describe how we can help you. This email is for accommodation requests only and cannot be used to inquire about the status of applications. We are an Equal Opportunity Employer (EOE) and do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Some offers of employment are contingent upon successfully passing a drug screen and/or background check.

Position Title: Project Engineer FLSA Status: Non-Exempt Department: Operations Date: 2026 Reports to: Construction Manager, Mountains Location: Eagle, CO Wage Range: $75,000-90,000 Annually + discretionary bonus eligibility Benefits include: Medical, dental, vision, 401K, Long Term Disability, Short Term Disability, AD&D, PTO, Employee Assistance Program, additional optional insurances. To see a list of all MTech's great perks visit - ********************************************* Job Summary MTech Mechanical is a leading mechanical design/build contractor in Colorado, and the majority of our project procurement is negotiated in a design assist/build arrangement. MTech's culture is centered around our commitment to innovation, our support of our internal teams, our integrated project approach, and our long term client relationships. Established in 2002, MTech is a true design/build/maintain mechanical contracting firm, and we continuously advocate collaborative and sustainable solutions for our clients and their projects. MTech Mechanical promotes personal and professional development, work/life balance, health and wellness, and community involvement. This role will team with project manager and field managers by providing the engineering, operational and administrative support related to all phases of projects from start to finish. Project Engineer's career paths are more directed to Project Management or Sales Engineering. The PE I will be expected to go through a rotation program consisting of time spent in Construction/Special Project in office operational support and Construction Projects on site operational support. This will give the PE I an opportunity to experience multiple facets of our company as well as develop a more technical base for individual growth throughout the company. A successful candidate will be responsible for the following during the In Office/On Site Operational Support portion of this role: Assign job numbers, set up job in accounting system, set up job files, and organize all project documentation. Assist in transferring engineering costs to construction projects. Obtain necessary licenses and permits. Obtain required insurance certificates and bonds. Inform service department of estimated start-up dates, budget, submittals, drawings and job set-up sheet for scheduling. Preparation and entry of original and revised contracts and estimates. Customize phases for field managers as required. Process all contract and subcontract documents from initiation through signing. Code and prepare subcontract invoices for project manager's approval, review for correct contract amounts, change orders, and previous paid amounts. Request submittals from vendors and subcontractors. Number, log and prepare for general contractor's approval. Distribution of approved submittals to field managers, subcontractors, service, suppliers and others as required. Follow-up on all submittals and re-submittals. Distribute and log current plans to field managers and subcontractors. Work with project manager and field managers to order and expedite all equipment and material. Coordinate with purchasing for equipment and material buyout. Track and log equipment as required. Keep project manager and field managers up to date with weekly job cost reports. Research and correct all misapplied time and invoices. Number, log and submit all RFI's and change documents to or from the general contractor. Log and distribute responses to appropriate parties for cost impact. Notify general contractor of cost impact via change order request. Follow-up for formal change orders. Check formal contract change orders against request. Process and return to general contractor. Update job contract and estimate in accounting system. Write approved subcontract change orders and update the estimate, if applicable, in accounting system. Prepare monthly billings, lien releases and required paperwork for the billing process. Enter invoices in accounting system in the correct fiscal period. Track payments and make collection calls within 45 days of issuance of invoice. Prepare monthly projection reports to review with project manager. Make corrections to contract and estimate amounts within required due date. Request and follow-up on O&M manuals from vendors and subcontractors. Prepare the warranty statement. Assemble close out package and submit to general contractor and service by the required due dates. Close jobs and set up warranty jobs with expiration dates and estimated costs. Answer calls for project manager and handle issues when possible. All clerical duties, correspondence, typing, filing, faxing, deliveries, mailing, copying and attending and scheduling meetings. Regular and predictable attendance is expected in order to meet the requirements of this position. Other duties as assigned. Qualified candidates will possess the following education and experience: B.S. in Mechanical Engineering, Mechanical Engineering Technology, Architectural Engineering, Construction Management. Working knowledge of personal computers, Microsoft Windows and Word, Excel and Outlook. Experience in equipment/systems applications. Working knowledge of architectural, electrical, and structural drawings preferred. HVAC design and/or system knowledge a plus. Career path: there are levels of progression to a PE II and PE III that will align with skills and experience learned on the job. About MTech For 23 years, MTech has had a goal to build a great company with a great reputation. With that in mind, we want an incredible team. With our values of integrity, commitment, excellence, growth and fun, we are looking for amazing individuals to build upon our success. Our team members are our greatest asset, and we have a people-centric culture. We value the contributions they make towards growing MTech into being the premier design-build mechanical contractor in Colorado. MTech provides an environment that promotes genuine communication so that our team members can freely collaborate. We offer competitive employment packages and care about everyone's safety and wellness - we show this through initiatives like Mental Health Month, Employee Assistance Programs and Construction Inclusion Week participation. Approximately 650 individuals make up our teams across Colorado. We inspire and develop our talent with internship opportunities, an in-house training program and 100% company paid apprenticeship programs in sheet metal, pipefitting, plumbing and service. We also provide specialty training on topics such as medical gas certifications, DORA required Plumbing continuing education classes, various vendor trainings, CPR/First Aid and others. We also offer soft skill classes on topics such as Bias & the Brain (The Inclusion Series), Building a Culture of Trust, Navigating Conflict, and others. High-quality training enables our team members to exceed expectations in their roles and fuels the passion behind our company. We are proud to of the amazing projects we have completed in our communities. This list includes projects such as McGregor Square, UCCS Hybl Sports Medicine & Performance Center, AIMS Community College Welcome Center, Vail Health, Grand Colorado Peak 8 at Breckenridge Ski Resort, NREL and many more. Working for MTech provides the opportunity to work on a variety of different projects such as Healthcare, Higher Education, Data Centers, Cleanrooms, Office Buildings, Multi-Family, Biotech & Pharmaceuticals, and others. Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl; talk or hear; taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment This position takes place in a general office environment. Work is generally sedentary in nature, but may require standing and walking for up to 20% of the time. The work environment is generally favorable. Lighting and temperature are reasonable. Work is generally performed within an office environment, with standard office equipment available. This Job Description is not a complete statement of all duties and responsibilities comprising this position and may change with or without notice. MTech Mechanical is an EEO Employer and does not discriminate based on age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local law. How to Apply: If you are interested in this role or any others at MTech, please visit ************** to apply.

What does a Manufacturing Process Engineer Intern do at Swire Coca-Cola? Manufacturing Process Engineer Interns assist with identifying and driving out losses through the development of standards and systems. They support the daily activities of the production line(s) and/or processing areas. They build long-term capability into the manufacturing process, systems, and technicians. Job Details:This position is for a summer Internship from May 2026 - August 2026 Responsibilities: Identify, prioritize, analyze, and eliminate losses and inefficiencies Collaborate with the Line Structure Teams to carry forward and execute improvements Assist in analyzing line performance including run rates, scrap rates, unplanned and planned down times, and any other operational losses Identify 1-3 actions to reduce these losses and create a project charter and scope for each action Requirements: Currently pursuing a Bachelor's degree in Engineering (Process, Chemical, or Industrial) or equivalent related program with a graduation date of Aug 2026 or later

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Full-time Description Mechanical Design Engineers involved in the quality of the features offered in our products are responsible for researching mechanical technologies to use in improving our motion control product offering and designing their manufacturing processes. They support the advanced product quality planning (APQP) processes in new product design and development, and engineering change notifications (ECN) for related manufacturing processes. They may interface with customers, and vendors to develop new manufacturing processes or modify existing processes that meet all specified customer requirements, including regulatory requirements. Responsibilities: Support and/or create new product designs for improved product reliability Make enhancements to existing product designs and related manufacturing processes Create prototypes and develop written test protocols Design manufacturing and test control apparatus and equipment Design quality and manufacturability into new products and production processes Analyze design trade-offs, conduct design reviews, solicit input Develop innovations to resolve technical issues Support the product planning and launch processes Develop and execute project scope, cost estimates, feasibility and schedules Communicate specifications for purchase of materials and equipment/tooling when necessary Other mechanical design engineering work as needed Requirements Skills: Strong understanding of the current industry guidelines for designing, manufacturing, and testing Strong understanding of compliance, engineering standards, and certifications including knowledge of ISO standards and documentation Strong understanding of Advanced Product Quality Planning concepts (APQP) Solid understanding of 3D CAD design (SolidWorks experience) Familiar with assembly effects on runout and concentricity and how to minimize Familiar with deliverables such as rotor dynamics analyses Familiar with internal system foreign object debris (FOD) generation and how to minimize in design Familiar with high IP rated electro-mechanical device characteristics preferred Familiar with developing and delivering complete solutions Familiar with vendor qualification Strong technical writing skills Familiar with leading large projects Ability to communicate independently and effectively with all levels of management Persistence to meet schedules Advocates positive team concepts Good communication and organizational skills Qualifications: BS or MS degree in Mechanical Engineering, Technology, Physics or closely related field required 0-5 years' experience, with 3+ years quality engineering experience preferred Six Sigma or other lean manufacturing certifications preferred Coursework in Design for Manufacturability and/or Mechatronics a plus Willing to relocate to North Idaho required Able to travel domestically and abroad as projects require, but typically averaging 15% or less US citizenship or permanent work visa required Job Details: Full time with benefits Onsite position Salary DOE Essential Functions: Ability to wear Personal Protective Equipment (PPE) when required Use of upper body, arms, and hands throughout the day Lifting 10-20 pounds repeatedly throughout the day Bending, stooping, and reaching overhead throughout the day to reach materials to move or pickup Able to work regularly with epoxy, glues, sealants Company Benefits: Health insurance - 100% employee premium coverage with low deductible! Dental insurance Vision insurance Paid time off (vacation, sick leave, select holidays) 401(k) 401(k) matching Long Term Disability insurance Life Insurance Our company makes reasonable accommodations for individuals with disabilities who are otherwise qualified to perform a job unless such accommodations would impose an undue business hardship. Please let us know if you need an accommodation to participate in the application process. We can be reached by telephone at ************, by fax at ************, or email at accommodations@encoder.com. Please address correspondence to the HR Manager. Encoder Products Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Ready for more than just a job? Build a career with purpose. At Lactalis in the USA, we're committed to providing meaningful opportunities for our people to learn, grow, and thrive-whether you're just starting your journey with us or looking to take the next step in your career. From day one, we offer the tools and support to help you succeed. As the world leader in dairy, Lactalis is a family-owned company with over 85,000 pragmatic and ambitious professionals across the globe. Each day, we're proud to produce award-winning dairy products that bring people together. In the US, we proudly offer an unrivaled house of beloved brands, including Galbani Italian cheeses and ricotta, Président specialty cheeses and butters, Kraft natural and grated cheeses, Breakstone's cottage cheese, Cracker Barrel, Black Diamond cheddar, and Parmalat milk. Our yogurt portfolio includes siggi's, Stonyfield Organic, Brown Cow, Oui, Yoplait, Go-Gurt, :ratio, Green Mountain Creamery, and Mountain High, along with a growing family of ethnic favorites like Karoun, Gopi, and Arz. At Lactalis, we live by our core values-Ambition, Engagement, and Simplicity. We foster a workplace where innovation thrives, diverse perspectives are celebrated, and everyone's unique background and ideas are valued. Even if you don't meet every qualification, we encourage you to apply. We want to hear about your PASSION, your STORY, and how your EXPERTISE can help us shape the future of dairy From your PASSION to ours Lactalis North America is currently seeking candidates to join our Engineering team in Nampa, Idaho. Requirements The Industrial Engineer Intern will support the Nampa Engineering Project leads by assisting in the development of the plant engineering projects, project execution, equipment start-up, and commission. In this position you will be partnered with experienced degreed Engineering professionals. We will provide you with training and development to grow your career in Project Engineering in the Food and Beverage industry. You will learn the processes and procedures necessary to complete F&B engineering projects successfully from the ground up. Our regular weekly meetings and feedback sessions allow you to learn and develop as you grow. From your EXPERTISE to ours Key responsibilities for this position include: * Drive results through effective communication and relationship building. * Manage time effectively to ensure multiple deadlines are met amongst competing deadlines. * Maintain professionalism, composure, and resiliency during difficult situations. * Take accurate measurements of equipment, location, footprint, and food equipment system processes. * Create a statement of work document from information provided by Project Engineers. * Create/update AutoCAD equipment layouts, piping and instrumentation diagrams. * Assist with RFI's between contractors and project engineers, daily/weekly checkups and reporting of contractor's on-site performing work. * Assist with CAPEX process by ensuring purchase orders are made timely, shipments are tracked, inventoried or expedited as needed. * Assist with completion of punch list items and provide support to on-site contractors performing project work. * Maintain OSHA/GMP/Safety compliance with all contractors on site. From your STORY to ours Qualified applicants will contribute the following: Education * High School Diploma or General Education Development (GED) required. * Must be currently enrolled in a 2 or 4 year college or post graduate program. Experience * Prior CAD 2D/3D (AutoCAD, Solid Works) training on manufacturing equipment and facility layouts. * Prior food/beverage manufacturing experience preferred. Specialized Knowledge * Proficient in Microsoft office 365. * Proficient in Microsoft Excel Skills / Abilities * Ability to read, analyze and interpret P&ID's, building and electrical drawings preferred. * Ability to deliver and produce quality work within tight timeframes while managing multiple priorities simultaneously. * Ability to work with suppliers, trade partners, customers, and internal team members to discuss and document requirements/changes, address concerns and provide timely project status. * Ability to creatively solve problems and work under time pressures. At Lactalis, we offer a comprehensive Total Rewards Program with a variety of affordable benefits and coverage options. We support insurance costs significantly, contribute generously to retirement plans, and offer Paid Time Off from day one. We are committed to your professional growth, providing training and development opportunities, including Education Reimbursement. Join us and grow your career. Lactalis is an equal employment opportunity employer. We will not discriminate against applicants with regard to any legally-recognized basis including, but not limited to: veteran status, race, color, religion, sex, national origin, age, marital status, sexual orientation, and physical or mental disabilities. Further, any division of the Company that is an Affirmative Action Employer will comply with all related legal obligations.

What does a Manufacturing Process Engineer Intern do at Swire Coca-Cola? Manufacturing Process Engineer Interns assist with identifying and driving out losses through the development of standards and systems. They support the daily activities of the production line(s) and/or processing areas. They build long-term capability into the manufacturing process, systems, and technicians. Job Details:This position is for a summer Internship from May 2026 - August 2026 Responsibilities: Identify, prioritize, analyze, and eliminate losses and inefficiencies Collaborate with the Line Structure Teams to carry forward and execute improvements Assist in analyzing line performance including run rates, scrap rates, unplanned and planned down times, and any other operational losses Identify 1-3 actions to reduce these losses and create a project charter and scope for each action Requirements: Currently pursuing a Bachelor's degree in Engineering (Process, Chemical, or Industrial) or equivalent related program with a graduation date of Aug 2026 or later