Engineering associate jobs in Plymouth, MN - 788 jobs

All

Engineering Associate

Engineering Internship

Project Engineer

Manufacturing Engineer

Field Engineer

Engineering Specialist

Manufacturing Engineering Technician

Engineering Specialist (Flex Staff)
CDM Smith 4.8
Engineering associate job in Minneapolis, MN
CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$78.6k-157.2k yearly 6d ago

Looking for a job?

Let Zippia find it for you.

Materials Engineering Intern
Entegris 4.6
Engineering associate job in Chaska, MN
Here at Entegris, we use advanced science to enable technologies that transform the world, and we are seeking employees who have the drive to continue the mission. The Role: The AdvancedPuritySolutions,Materials Engineering Team isseekinga creative and innovative individual to help accelerate the development of next generation materials to meet the needs of leading semiconductor technology developers. This role of MaterialsEngineering Internreports to the SeniorManager, Materials Engineering. AI,loT, Automation, and Digitization are fueling growth in the semiconductor industry. This is creating opportunities at Entegris as we develop leading-edge polymeric materials to meet thesetechnologydemands. Join our team and apply yourexpertiseand leadership to be a part of creating the materials to solve complex customer challenges. What You'll Do: *Lead polymer development projects involving cross-functional teams(engineering, manufacturing, product management, sales, and marketing, and global supply management) * Use your materialsexpertiseto creatematerialssolutions based on customer-defined product and application needs * Developtest/qualification plansand success criteria for a given application * Provide support to engineering and other departmentson new and existingmaterials issues(manufacturing,processing, incoming qualityissues) * Investigate materialfailurestodeterminerootcauseandwork with cross functional teams to recommendcorrective actions *Document workviadata packages and material specifications What We Seek: *Experiencewithformulation and development of polymeric compounds *Analytical background with working knowledge of chemical and polymer analysis laboratory instrumentation and methodologies * Knowledge ofpolymer manufacturing and processing including injection molding,rotomolding, blow molding, and extrusion *Experience using structured DOE and statistical methods in an R&D environment *Basic understanding of Root Cause and Corrective Action processes and tools *Experience in a global R&D environment ispreferred Desired Major and Graduation Year: *Pursuing aBachelor's Degreein Materials / Chemical / Polymer Engineering * Graduation date of spring 2026 or later Eligibility: * Entegris does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need Entegris immigration sponsorship (e.g., H1B, TN, STEM OPT, etc.) now or in the future. * Must be a currently enrolled student * Available to work 40 hours a week, M-F (8a-5p) beginning in mid-May/June through August/September. * Must be familiar with the universities requirements to participate in an internship program *Must be able to lift 50lbs Why Work at Entegris Lead. Inspire. Innovate. Define Your Future. Not everyone who works for a global company shares the same background, experiences and perspectives. We leverage the differences of our employees to bring new ideas to the table. Every employee throughout the company is encouraged to share input on projects and initiatives. Our decision-making process is truly a collaborative effort as we realize there are leaders at every level of the organization. We put our values at the core of how we operate as an organization - not just when it's convenient, but in a lasting and meaningful way. We want the time and energy you spend here to have a positive impact on your life inside and outside of the office. What We Offer Our total rewards package goes above and beyond just a paycheck. Whether you're looking to build your career, improve your health, or protect your wealth, we offer generous benefits to help you achieve your goals. * Generous 401(K) plan with an impressive employer match * Excellent health packages to fit your needs * Flexible work schedule with paid holidays and sick time * Values-driven culture with colleagues that rally around People, Accountability, Creativity and Excellence Compensation: $25-$30/per hour range with actual pay dependent on candidate overall skills for the role. Entegris does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need Entegris immigration sponsorship (e.g., H1B, TN, STEM OPT, etc.) now or in the future. #LI-MW1
$25-30 hourly 4d ago
Industrial Field Engineer
McGough 4.5
Engineering associate job in Saint Paul, MN
McGough is a respected partner that brings six generations of experience to high profile, unique and complex construction projects. We take great pride in our people and their extraordinary expertise in planning, development, construction and facility management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. INDUSTRIAL FIELD ENGINEER The primary role of the Field Engineer is to assist the onsite Superintendent and/or Foreman with a variety of tasks in support of project execution. In this role, the Field Engineer will learn foundational principles and processes of building construction which will serve as a gateway to a career path in either Field Operations or Project Management. QUALIFICATIONS Required Associate's degree in Construction Management or related field experience. Some Internship, education or field experience Preferred Bachelor's degree in Construction Management or related field Demonstrated experience initiating and driving continuous improvement Current OSHA 30 certification Skills Strong collaboration and communication skills High attention to detail with strong organizational skills Ability to prioritize and manage multiple tasks within time constraints Self-motivated with the ability to work independently and with minimal supervision Proficient in Microsoft Office Suite Strong customer service mindset with a consistently professional demeanor Excellent interpersonal, written, and verbal communication skills Ability to exercise sound judgment and remain diplomatic in all situations Demonstrated discretion when handling confidential information Ability to take direction from multiple managers, clients, and vendors Strong teamwork skills and collaborative approach Proactive mindset focused on continuous improvement High level of integrity and professionalism Approaches each interaction as an opportunity to add value and strengthen relationships OFFICE, TRAVEL & SCHEDULE Office: Various jobsites and/or corporate/regional office. Travel: Ability to travel or relocate to project assignments (12-24 months). RESPONSIBILITIES AND TASKS Assist with quantity tracking and verification Track and monitor material inventory on the project site Support building layout and survey activities Assist with the organization, storage, and maintenance of tools Coordinate material and equipment deliveries Assist in preparing Requests for Information (RFIs) Support subcontractor coordination and management Participate in weekly coordination meetings Assist with document control and maintain accurate as-built documentation Conduct site safety audits and participate in site safety meetings Maintain accurate and timely daily logs Other Duties as assigned Participate as an active member of the project team. Contribute to shared goals and collaborate with colleagues on achievement of priorities. Collaborate with internal teams, contractors and other stakeholders to align efforts. Build and maintain strong relationships with internal and external stakeholders. Coordinate tenant move-ins and move-outs Maintain accurate tenant and vendor files Collaborate with internal teams, contractors, and external stakeholders Perform additional duties as assigned TECHNICAL COMPETENCIES Construction Fundamentals: Demonstrates working knowledge of construction means, methods, materials, and sequencing. Understands basic surveying, layout, and constructability principles. Applies foundational knowledge of safety standards and jobsite protocols Project Documentation & Controls: Accurately supports quantity tracking, material inventory, and daily logs. Assists with preparation and tracking of RFIs, submittals, and as-built documentation. Maintains organized, accurate, and timely project records Field Coordination & Support: Supports coordination of subcontractors, vendors, and material deliveries. Assists Superintendent and Foreman with daily jobsite activities and issue resolution. Participates effectively in coordination meetings and jobsite communications Safety & Risk Awareness: Demonstrates understanding of OSHA standards and company safety requirements. Conducts site safety audits and actively participates in safety meetings. Identifies and escalates potential safety risks in a timely manner Technology & Tools: Effectively uses Microsoft Office Suite and project-related software. Learns and applies company systems, tools, and field technology. Uses technology to improve accuracy, efficiency, and communication MEASURES OF SUCCESS Jobsite Accuracy & Reliability: Quantity tracking, inventory records, and daily logs are accurate and completed on time. Documentation errors are minimal and promptly corrected when identified Project Support Effectiveness: Superintendents and Foremen can rely on the Field Engineer for consistent, high-quality support. Materials, tools, and information are available when needed to support field operations Safety Performance: Actively contributes to a safe jobsite culture. Participate in safety audits and meetings with preparation and engagement. Demonstrates compliance with all safety policies and procedures. Communication & Collaboration: Communicates clearly, professionally, and timely with internal teams and trade partners. Effectively follows direction and seeks clarification when needed. Builds positive working relationships across jobsite stakeholders Learning & Development Progression: Demonstrates continuous improvement in technical knowledge and jobsite competency. Seeks feedback and applies learning to future work. Shows readiness for increased responsibility over time BEHAVIORS OF SUCCESS Ownership & Accountability: Takes responsibility for assigned tasks and follows through to completion. Holds self-accountable for accuracy, quality, and timeliness. Proactive Mindset: Anticipates needs and identifies potential issues before they escalate. Looks for opportunities to improve processes, organization, and efficiency Team-Oriented Approach: Supports team goals over individual priorities. Contributes positively to jobsite culture and collaboration. Professionalism & Integrity: Acts with honesty, respect, and discretion in all situations. Maintains composure and professionalism under pressure. Adaptability & Resilience: Adjusts effectively to changing priorities, schedules, and jobsite conditions. Remains solution-oriented when challenges arise. Relationship Building: Treats every interaction as an opportunity to add value. Build trust through reliability, communication, and follow-through PHYSICAL REQUIREMENTS The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position involves sitting for extended periods of time at employee's workstation and during meetings as well as while traveling, either by plane or car. Employee needs to be able to lift to 50 pounds as frequently as needed to move objects; dexterity to write and manipulate computer keyboard and mouse; ability to hear and speak clearly; and ability to distinguish between colors on graphs and charts. Employee will be required to visit construction jobsites which may expose the employee to dirt, dust, uneven surfaces, outdoor weather conditions and extreme temperatures. *** In alignment with our commitment to pay transparency, the base salary range for this position is $80,000 to $110,000, excluding fringe benefits or potential bonuses. If you join McGough, your final base salary will be determined by several factors, including geography, location, skills, education, and experience. Furthermore, we place significant value on pay equity among our current team members as part of any final job offer.
$80k-110k yearly 2d ago
Manufacturing Engineer
Doherty | The Employment Experts
Engineering associate job in Monticello, MN
Join a dynamic team in Monticello! Doherty Staffing Solutions is partnering with a leading manufacturing company located in Monticello, MN. We are seeking candidates for a Sr. Manufacturing Engineer role. Compensation for this direct hire opportunity is $108,000-$120,000 per year, plus bonus potential, depending on skills and experience. Interested? Read below for more details! What you'll do as a Sr. Manufacturing Engineer: Review customer specifications and models for manufacturability; recommend improvements when needed Interpret complex geometry, GD&T requirements, and CMM reports to monitor processes Lead automation projects from concept to implementation Apply problem-solving methods to resolve design and manufacturing issues Conduct cycle time evaluations and lead tooling reviews with suppliers Perform PFMEA risk analyses and implement error-proofing solutions Utilize CAD/CAM systems for product and process design What you need to be a Sr. Manufacturing Engineer: B.S. in Engineering or technical degree (Machining, CAD/CAM, Automation) preferred; equivalent experience considered CNC machining experience required 3D CAD/CAM proficiency required; automation experience preferred Skilled in MS Excel and Word Ability to manage shifting priorities and complete projects successfully Strong communication (verbal, written, presentation) Detail-oriented with excellent planning and organizational skills Initiative and ability to work independently and collaboratively Problem-solving and continuous improvement mindset Technical expertise in CNC machining, CAD/CAM, and automation systems #NewCareerByDoherty What are you waiting for? Apply today! Click APPLY NOW to complete our mobile-friendly, online application. For questions or additional information about the Sr. Manufacturing Engineer roles, please contact our Doherty recruiter at **************. Company benefits include health insurance (comprising medical, vision, and dental coverage), disability insurance, life insurance, and a 401(k) plan with matching contributions, as well as paid time off and paid holidays.
$108k-120k yearly 4d ago
Project Engineer
Loeffler Construction
Engineering associate job in Lakeville, MN
Loeffler Construction is looking for a full-time, experienced Project Engineer! Best Places to Work 2023 & 2025 - Minneapolis/St. Paul Business Journal Are you curious, hard-working, and like to make a difference? Loeffler is seeking a highly detailed individual to join the construction team. The Project Engineer is responsible for planning, coordinating, scheduling, as well as supervising, and monitoring on-site construction engineering activities for a project. Essential Duties and Responsibilities The Project Engineer is responsible for timely and accurate performance in fundamental, routine construction-related tasks for both project management and field construction activities. Depending on the size and/or scope of the project, the Project Engineer will assist the Project team with responsibilities including, but not limited to: Supporting the oversight and management of multiple projects from preconstruction through the closeout/warranty period Prepare detailed schedules (including Pre-Con, Procurement, Construction, and Close-out), and monitor and update schedules weekly. Utilize look-ahead schedules and collaborate with the team Anticipating client needs, documenting, and tracking progress with regular communication. Managing all project document control within Procore Prepare Agendas and run progress meetings, owner/architect meetings, and subcontractor pre-installation meetings. Accurately document discussions and distribute meeting minutes within 48 hours Process submittals and RFI's, and work with the Site Superintendent to determine tasks requiring prioritization Education Requires a bachelor's degree in Construction, Engineering, Architecture, or a related field preferred Skills, Abilities and Qualifications · Minimum of three (3+) years' experience in construction or a similar role preferred · Excellent interpersonal communication skills, attention to detail, and organizational skills · Working knowledge of Procore is desirable · Advanced knowledge of Microsoft Office Suite · OSHA 30 Hour Certification preferred Physical Demands and work environment The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits There is a generous benefit offering, including: Medical, Dental, Vision, STD/LTD, Life, PTO, 401k, just to name a few. To view a full description, visit: *****************************************
$61k-83k yearly est. 1d ago
Engineering Intern
Endeavor Air 4.6
Engineering associate job in Minneapolis, MN
About Us Endeavor Air is a wholly-owned subsidiary of Delta Air Lines. Flying as Delta Connection, Endeavor operates 141 regional jets on 750 daily flights to 122 destinations in the United States, Canada, and the Caribbean. Headquartered in Minneapolis, Minn., Endeavor has hub operations in Atlanta, Cincinnati, Detroit, Minneapolis, New York, and Raleigh-Durham, and 11 maintenance bases across our network. Our Culture We know that our people are our greatest assets, and we are committed to building a culture where employees love coming to work each day. At Endeavor Air, we foster a diverse, culturally-rich and safe workplace where employees are treated with dignity and respect. With a culture built on safety, excellence, and teamwork, Endeavor offers limitless potential for aviation professionals looking to start or continue their careers. Our team promotes an inclusive environment in all aspects of the airline and our operation. As an EEO employer, we provide opportunities for all qualified candidates without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran, or disabled status. Overview The Engineering Intern position at Endeavor Air will integrate knowledge and theory learned in the classroom with practical application and skills development in a professional workplace. The Intern will utilize analytical and critical thinking skills to complete project-based work assignments with an emphasis in Engineering. The Application Process: We encourage applicants to apply as early as possible to receive next steps in the application process. After an application is submitted, the Talent Acquisition team will review your application. Due to the high volume of applications, the reviewing process may take several weeks. After the reviewing process of the applications, all applicants will also be notified to complete a required one-way video interview. Please note, due to high volume of applications, videos will take several weeks to review, and you may not receive an email or hear the status of your application for a while, however you will receive an update from the Talent Acquisition team. The Endeavor Air Summer Internship 2026 program will run from the end of May/early June 2026 - middle of August 2026. Responsibilities * Fully applies basic engineering theories, concepts, principles, and techniques to problems present by specific customers. * Provides interface with vendor and manufacturer representatives on technical issues pertaining to specific job functions. * Utilizes basic knowledge of the aircraft, performance, engines, structures, systems, and their components as it pertains to specific job functions. * Assists other engineers in the analysis of statistical data and basic engineering analysis. * Performs financial calculations to determine project feasibility. * Identifies moderately complex and complex issues and problems; actively and constructively participates in problem solving discussion and resolution; breaks down problems into distinctive parts and identifies priorities to address each part. * Provides direction and overall program management for engineering projects. Other Duties * Performs other duties as assigned. Supervisory Responsibilities * Not Applicable Competencies Required * Embraces diverse people, thinking and styles. Listens and communicates openly, honestly, and respectfully. Acts in an ethical manner. * Concern for Safety - Consistently makes safety and security, of self the priority. * A continuous learner who identifies and addresses learning needs to advance own performance. * Dedicated to meeting the expectations and requirements of internal and external customers. Qualifications * Currently enrolled in an undergraduate Engineering, or closely related degree program with Junior or Senior credit standing at the time of application submission. * Ability to work both independently and collaboratively in a business environment. * Above average written and verbal communication skills. * Strong PC proficiency with an emphasis on Microsoft Excel & Microsoft Office Suite. * Effective organizational, time management, & multi-tasking skills. Work Environment & Physical Demands * Minimal physical exertion such as: pulling, pushing, reaching, bending, standing, walking, and light lifting of boxes, bags files, and electronic equipment not in excess of 30 lbs. * Computer work, in a typical office environment sitting for the majority of the day. * Ability to work a full-time flexible schedule, 32-40 hours per week, during normal business hours. * Ability to work and be based in Minneapolis, MN; no relocation assistance will be provided. What We Offer Providing world-class service to our customers starts with providing world-class benefits to our employees. Endeavor Air employees receive a competitive total compensation package which includes a variety of benefits to choose from and some of the best perks around. * Free or reduced-rate travel privileges on Delta Air Lines and 80+ air carriers worldwide for employees and eligible family members * Comprehensive Medical, Dental, and Vision Plans * 401(k) with Company Match starting on Day 1 * Operational Performance Rewards (OPR) Program * Life and AD&D Insurance, Short and Long-term Disability, Flexible Spending Accounts (FSA), and voluntary supplementary benefit options FLSA Status Hourly Minimum Position Pay Range USD $16.00/Hr. Maximum Position Pay Range USD $16.00/Hr.
$16 hourly Auto-Apply 6d ago
Intern Engineer
General Dynamics Mission Systems 4.9
Engineering associate job in Bloomington, MN
Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology. Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening for an Engineering Intern to join our team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. In addition to receiving a competitive wage, the Engineering Intern will enhance their skill set by working among a talented and technically accomplished group of colleagues. Interns will also enjoy a flexible work environment where contributions are recognized and rewarded. #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $0.00 - USD $0.00 /Yr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans
$28k-39k yearly est. Auto-Apply 60d+ ago
2026 Summer Corporate Intern - Engineering
Caterpillar, Inc. 4.3
Engineering associate job in Brooklyn Park, MN
**Your Work Shapes the World at Caterpillar Inc.** When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. **About the Role** Caterpillar's Corporate Engineering Intern program seeks students currently enrolled in a four-year university to work alongside engineering professionals to learn and apply themselves to project work within their teams. Interns will have assignments that provide them with experience and significant learning opportunities. In addition to this work, Interns can network with management throughout the company to learn about Caterpillar areas outside their assigned team. Students can deepen their business skills in their assignments through team and business partner interactions, develop their skills, conduct presentations, and measure their success through the performance and evaluation process. **What You Will Do** You'll join a team with diverse project responsibilities and have valuable networking opportunities with all levels of Caterpillar employees. The internship is a 40-hour-per-week assignment lasting 12 weeks. You can focus on building technical abilities in roles including (but not limited to): + **Product Design:** Engineer components & systems for Caterpillar products to meet our customers' needs. Deliver solutions by leading collaboration with cross functional teams throughout our value chain starting from the initial concept through production. + **Simulation/Performance Analysis:** CFD - Computational Fluid Dynamics (ANSYS), FEA - Finite Element Analysis, 3D modelling, root cause investigation; system/subsystem/component design optimization, structural dynamics, development and optimization of Engine, Aftertreatment, Battery, Fuel Cell, Powertrain, and/or Machine System performance. + **Test/Validation/Hands on:** Apply strong mechanical engineering understanding in a test/validation (hands-on) environment, troubleshooting issues, and collaborating with others for optimal results. + **Controls Development:** Develop/Implement control system algorithms using Matlab/Simulink for various control systems including but not limited to engine controllers, machine implement controllers as well as powertrain controllers. Will be responsible for understanding the feature requirement, implementing it as well as testing it prior to a production roll out. + **Electronic Components:** Will be responsible for designing and testing various electronic control modules as well as various electronic components. Will work with various internal Caterpillar clients to understand controller/component requirements, work with suppliers on design and validation of the components, as well as testing the components in various environments. Other duties may include design of Printed Circuit Board schematics as well as perform digital/analog/power circuit analysis and testing, and ensuring that FMEAs [Failure Mode and Effects Analysis] are conducted and documented to meet stringent Caterpillar quality requirements + **Embedded Software Development:** Develop embedded software in C, C# and/or C++ for various electronic control modules. Some examples of embedded software development applications include Datalink communications, Inputs and Outputs [Sensors and actuators], speed calculation, injection/spark timing, memory management, CPU optimization, multi core design and implementation etc. In addition, some areas of work include developing scripts in Python/Visual Basic for automation. + **Software Validation/Verification for Electronic Systems:** Verify functionality of a feature or control system algorithm on a HIL [Hardware in the Loop] simulator bench or a SIL [Software in the loop] system. Understand requirements of the feature and/or the schematics of the controller / control system, verify functionality and debug/report anomalies to the development team and help validate fixes. + **Engineering Data Analytics:** Leverage ability to write and understand computer code, especially Python; apply knowledge of data analytics/data science, machine learning concepts/tools, and engineering and statistics fundamentals. + **Process Engineering:** Apply mechanical, manufacturing, systems and/or industrial engineering knowledge to analyze and optimize an engineering process or processes. Will have the opportunity to leverage problem-solving and communication skills. **What You Have - Skills and Experiences** In this role, you will have the opportunity to contribute your unique skills and experiences. Below are some of the most critical skills. + Analytical skills, initiating ideas, troubleshooting, root cause analysis, problem-solving, and critical thinking capabilities + Knowledge of engineering principles, theory, and engineering experience gained through projects, internships, and/or relevant work experiences + Fundamental understanding of engineering for a manufacturing environment, ability to design and implement materials, structures, machines, devices, systems and processes that safely realize a desired objective or invention + Organize and manage multiple projects simultaneously, ability to quickly gain and effectively apply new skills & knowledge + Success in collaborating with others of diverse cultures, interpersonal styles, and abilities + Strong written and verbal communication skills + Participate in and build on our inclusive, constructive, and productive work environment + Ensure all team members' contributions are recognized and valued. **Internship Program Qualifications:** + Must be enrolled full-time in a 4-year university/college pursuing an ABET accredited degree in Mechanical, Electrical, Computer, Agricultural or Aerospace Engineering or Engineering Technology at the time of application and throughout the program. + Must have completed 30 semester hours before the start of the internship.If a transfer student must have 12 semester hours completed at a 4-year university + Minimum 3.0/4.0 Cumulative Grade Point Average (no rounding) at current institution + Must be able to relocate to Peoria, IL area or indicated work location for the duration of the internship and complete daily work commute using reliable transportation **Top candidates can also have:** + Project or Team Leadership experience + Previous technical internship, co-op, or research/relevant experience + Excellent interpersonal and communication skills **Additional Information:** + Please attach your resume and an unofficial copy of your transcript to your application. + Applicants will be considered for positions throughout the United States. + Sponsorship is **NOT** available for this position. + These positions will be in the **Peoria, Illinois area** , with a small number of positions in other locations. + This position requires working onsite five days a week. **Final details:** Please frequently check the email associated with your application, including the junk/spam folder, as this is the primary correspondence method. If you wish to know the status of your application - please use the candidate log-in on our career website as it will reflect any updates to your status. For more information, visit caterpillar.com. To connect with us on social media, visit caterpillar.com/social-media. \#LI **Summary Pay Range:** $25.00 - $43.00 **Intern Hour Rate:** An intern's hourly rate is based on the major/degree being pursued and the number of completed academic hours achieved before the start of the internship. **Intern Benefits:** The total rewards package, beyond base salary, may include if eligible: + Accrued Paid Time Off (PTO) + Paid Holidays + Paid Volunteer Day + Housing Stipend + Relocation Assistance + Medical coverage + Voluntary benefits Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** **Posting Dates:** January 5, 2026 - March 12, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community (*********************************************** .
$29k-35k yearly est. 60d+ ago
Engineering Intern
Interplastic Corporation 4.1
Engineering associate job in Minneapolis, MN
Interplastic Corporation - Minneapolis, MN Summer / Part-Time / Internship Program What is Interplastic Corporation? Interplastic Corporation is a family-owned manufacturer specializing in high-performance gel coats, resins, and advanced composite materials. Our products support customers across marine, transportation, industrial, and construction markets, with a strong focus on quality, innovation, and long-term partnerships. The Minneapolis, Minnesota facility serves as a key manufacturing and technical location within Interplastic, where engineering, operations, and corporate teams collaborate to support production excellence and continuous improvement. We are committed to developing future engineers by offering meaningful, hands-on experience in a real-world manufacturing environment. What You'll Do as an Engineering Intern: As an Engineering Intern at Interplastic's Minneapolis plant, you will work closely with engineers, plant leadership, and cross-functional teams to support manufacturing operations, process improvements, and engineering projects. This role is designed to help students apply classroom learning in a practical setting while gaining exposure to chemical manufacturing and industrial operations. What You Can Expect to Do in This Role: Assist with engineering projects related to manufacturing processes, equipment, and operational efficiency. Support data collection, analysis, and reporting to aid engineering and production decision-making. Participate in plant floor activities, process observations, and improvement initiatives. Help develop or update SOPs, work instructions, process documentation, or engineering reports. Contribute to continuous improvement, safety, and quality initiatives. Collaborate with production, quality, maintenance, and engineering teams. Learn about composite materials, resin and gel coat manufacturing processes, and plant operations. Build professional skills in problem-solving, communication, teamwork, and time management. What We Are Looking For: Required Qualifications: Currently enrolled in a college or university pursuing a degree in Engineering (Chemical, Mechanical, Industrial, Manufacturing, or related field). Interest in manufacturing, process engineering, or industrial operations. Strong communication, organizational, and analytical skills. Ability to work collaboratively in a team-based, plant environment. Basic computer proficiency (Excel, Word, email, etc.). Preferred (but Not Required): Previous internship, co-op, or hands-on project experience. Coursework related to manufacturing, chemical engineering, or materials science. Curiosity, initiative, and a continuous improvement mindset. Why Intern with Interplastic? Hands-on, real-world engineering experience - not busywork Supportive mentors and experienced engineers invested in your growth Exposure to manufacturing operations and engineering career paths Stable, long-standing company with industry leadership Opportunity to return for future internships or full-time roles Pay Transparency: Hourly Compensation: $25.00Hours and schedule can be adjusted based on academic requirements. Equal Opportunity Employer: Interplastic Corporation is an equal opportunity employer and encourages diversity in the workplace. #LI-IPCORP
$25 hourly Auto-Apply 14d ago
Package Engineering Intern (Summer 2026)
Healthcare Services 4.1
Engineering associate job in Maplewood, MN
Thank you for your interest in joining Solventum. Solventum is a new healthcare company with a long legacy of solving big challenges that improve lives and help healthcare professionals perform at their best. At Solventum, people are at the heart of every innovation we pursue. Guided by empathy, insight, and clinical intelligence, we collaborate with the best minds in healthcare to address our customers' toughest challenges. While we continue updating the Solventum Careers Page and applicant materials, some documents may still reflect legacy branding. Please note that all listed roles are Solventum positions, and our Privacy Policy: *************************************************************************************** applies to any personal information you submit. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Job Description: Package Engineering Intern (Summer 2026) 3M Health Care is now Solventum At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers' toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue. We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you. An internship is a temporary position within Solventum. Interns typically work a full-time schedule throughout a 10-22 week assignment during the summer/fall of 2026. This position is limited to working 899 hours per service credit year. Applications on this requisition are reviewed and filled on a rolling basis; it is in a candidate's best interest to apply as soon as possible. Interested candidates should include a resume as part of their application. The Impact You'll Make in this Role As an Engineering Intern, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Assist in design and development of packaging components for global product lines. Support testing and validation of packaging materials to ensure compliance with performance and regulatory standards. Collaborate with suppliers and internal stakeholders on packaging specifications and documentation. Participate in continuous improvement initiatives focused on sustainability and cost reduction. Prepare reports and presentations summarizing findings and recommendations Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications: Currently pursuing a bachelor's degree in Package Engineering, or higher from an accredited institution Additional qualifications that could help you succeed even further in this role include: Prior internship/co-op experience with a manufacturing company Prior experience involving the design, build, operation, and/or maintenance of manufacturing or R&D equipment Project Management experience Work location: Hybrid - Egan, MN Relocation: not authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being Solventum offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope. Applicable to US Applicants Only: The expected compensation range for this position is $29.00 - $33.00 per hour, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.)after 90 days employment. Additional information is available at: *********************************************************************** Applicable to US Applicants Only:The expected compensation range for this position is - , which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: ***********************************************************************Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers. Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain *****************. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains. Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. Solventum Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.
$29-33 hourly Auto-Apply 13d ago
Casting Technology Manufacturing Engineer
GE Aerospace 4.8
Engineering associate job in Minnetonka, MN
The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
$56k-66k yearly est. 27d ago
2026 Engineering Internship
Horwitz 4.1
Engineering associate job in Minneapolis, MN
Job DescriptionSalary: $23.00 Horwitz is seeking motivated and professional students for our Engineering Internship Program. This hands-on program provides real-world experience across various engineering disciplines, including Estimating, Service, Preconstruction, Construction, and Design. Graduates/ Interns will have the opportunity to work alongside experienced engineers, project managers, and estimators, gaining valuable skills and insights in the field of mechanical engineering. RESPONSIBLITIES/DUTIES BY DEPARTMENT: These responsibilities generally describe the nature of each position and may not be all inclusive: Estimating Assist in reviewing construction drawings and specifications to help develop basic material and labor take-offs for mechanical systems. Support the preparation of cost estimates by organizing vendor quotes, updating Excel worksheets, and learning estimating software tools. Participate in jobsite walkthroughs and internal estimate review meetings to understand field conditions, scope alignment, and the overall estimating process. Service Assist with entering and organizing incoming service requests while learning how calls are reviewed, documented, and prioritized within the service department. Support dispatch and scheduling activities by helping track technician availability, job status updates, and parts-related follow-ups to ensure smooth workflow. Shadow service coordinators and leadership to observe customer communication, dispatch decision-making, and overall service operations. Preconstruction Manage and solicit Requests for Proposals (RFPs) for project planning. Learn to size and select key mechanical HVAC equipment. Attend job site meetings and walkthroughs, supporting the Preconstruction Manager. Assist in project estimating and gain insight into Horwitzs sales process, including equipment selection and procurement. Construction Join project managers on job site meetings and walkthroughs. Support project management on various projects by preparing O&M manuals, performing Revit modeling, and conducting load calculations. Provide additional support during vacation staffing to maintain project continuity. Design Perform BTU load calculations to assist in equipment sizing for specific projects. Use drafting software (e.g., Revit) to create permit and installation-level drawings. Conduct field visits with lead designers to document existing equipment and site details. Engage in team meetings and research to ensure code compliance and design accuracy. Perform other duties as assigned. Conduct yourself in accordance with Horwitz core values: Safe, Accountable, Professional, Motivated, Can Do and Curious. SKILLS/ABILITES: Strong verbal and written communication for collaborating with team members and attending meetings. Ability to analyze blueprints, conduct load calculations, and perform detailed data entry. A demonstrated interest in HVAC, building controls, and mechanical systems is a plus EDUCATION/EXPERIENCE: Enrolled in or graduated with a relevant engineering program/degree (Mechanical Engineering, Electrical Engineering, Construction Management, or a related field).
$23 hourly 28d ago
Reliability Engineering Intern
Veolia 4.3
Engineering associate job in Minnetonka, MN
Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description This is a full-time, 3-month internship/co-op, with an anticipated start date in May of 2026. Nature of work: Your responsibilities will include (but are not limited to). * Facilitate Reliability Centered Maintenance analysis * Implement Maintenance and Reliability strategies and plans into Veolia's corporate Computerized Maintenance Management System (CMMS) * Supports and manages projects based on the Facilities Capital Works Plan * Supports in developing the Asset Register and Hierarchies * Develop and implement equipment reliability strategies, including condition monitoring, visual inspections, non-destructive testing (NDT), and equipment mapping * Oversee the implementation of predictive technologies, including vibration analysis, ultrasonic analysis, thermography, PdMA, oil analysis, corrosion detection, and dissolved gas analysis * Participate technical incident investigations through Root Cause Failure Analysis (Cause Mapping/Fault Tree Diagram/5Whys/Cost Benefit Analysis) and implementation of recommended solutions * Perform Engineering Reliability & Performance Analysis/Monitoring * Develop critical spare parts strategies * Create and maintain comprehensive documentation to guide the efficient manufacture of products * Assist with sourcing and installation of new equipment for use in manufacturing. System design, fabrication of parts and system assembly * Coordinate tasks for the team, monitor work progress, and ensure quality standards are maintained May take on a coaching or mentoring role for junior team members Qualifications Skills: * Strong problem-solving and analytical skills * Excellent communication skills, both written and verbal * Ability to work collaboratively within a cross-functional team * A willingness to learn manufacturing systems, machinery, and quality control * Experience in cost optimization and identifying efficiencies Education: This role is best suited for anyone currently enrolled in a Bachelor of Engineering (BEng) program (Reliability, Chemical, Environmental, Industrial, or Mechanical) or a Chemistry Bachelor of Science (BSc) program. Consideration will also be given to other science-based technical programs and degrees. Additional Information Compensation: The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate's knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $21-24/hr. Veolia values diversity and inclusion and is proud to be an equal opportunity workplace. This internship is a paid opportunity and offers students the chance to gain valuable industry experience while contributing to the mission of sustainable water management. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. All your information will be kept confidential according to EEO guidelines. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.
$21-24 hourly 32d ago
Quality Engineering Intern
Steris 4.5
Engineering associate job in Plymouth, MN
At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Quality Engineering Intern will support our quality team by performing preliminary research, data analysis, and testing intended to better define process improvement opportunities to meet corporate initiatives and to support compliance requirements. This intern will have the opportunity to assist with maintaining and improving the quality system in accordance with the requirements of, as appropriate, the following standards: IS0 9001, ISO 13485, MDSAP, FDA 21 CFR Part 820/211, EU MDR and other applicable standards. This role also will help support complaint/CAPA investigations, supplier quality improvement, operations production and process controls, and product and service quality improvement with the use of statistical techniques and other accepted quality principles. This role executes activities concerned with the development, implementation, maintenance, and continuous improvement of STERIS quality systems. Key Program Info: Dates: Summer 2026 (May-August) Location: Plymouth, MN Work Environment: Onsite Hours: full-time for the duration of your internship What You'll Do as a Quality Engineering Intern Collect and analyze data. Help implement processes and procedures to improve efficiency and quality. Organize and document testing and product development process. Work as a collaborative team member in engineering projects. Interface with cross-functional teams. Communicate and present testing results and milestones (Microsoft Office Tools/Excel/PowerPoint/etc.). Assist in efforts associated with Installation Qualifications, Operational Qualifications and Process Qualifications. Assist in getting cycle time data and analysis and articulate process improvement recommendations, both written and verbally. Perform literature and web research. Assist in Lean tools and principles including set-up reduction, standard work, value stream mapping, A3 problem solving. The Experience, Skills and Abilities Needed Required: Currently pursuing a bachelor's degree in Engineering - Mechanical, Biomedical, or Electrical Engineering preferred. At minimum, sophomore year requirements must be completed by program start (May 2026) Ability to collect & analyze data Proficient in Microsoft Word, Excel, and PowerPoint Preferred: Previous internship or co-op experience within engineering Understanding of Lean Manufacturing and Continuous Improvement. 5S, standard work, process flow and value stream mapping. Other: Organizational, communication, problem solving, and troubleshooting skills. Pay range for this opportunity is $20-25/hr. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.
$20-25 hourly 5d ago
Quality Engineer Intern - Summer 2026
Cretex 4.0
Engineering associate job in Anoka, MN
Medical Cretex Medical is a family of companies that provides manufacturing and engineering services to medical device OEMs. We offer a complete range of end-to-end manufacturing capabilities, the latest technologies, and the talent to match any manufacturing or engineering challenge. Learn more at ********************** Responsibilities Quality Engineer Intern Position Summary The Quality Engineer Intern will be responsible for providing technical support focusing on Quality related projects. The intern will assist the Engineering department with projects from scope definition through implementation. This position will be located in Anoka, MN. This internship will be required to be on-site, working 40 hours/week. Quality Engineer Intern Duties and Responsibilities Provide internal customer technical support Part manufacturability technical support Assist with the implementation of process and design improvements Support and comply with the company Quality System, ISO, and medical device requirements Read, understand, and follow work instructions and standard work Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance Understand customer needs and the core business markets we serve Qualifications Quality Engineer Intern Qualifications Enrollment in a four-year degree program for Manufacturing, Mechanical, or Industrial Engineering Ability to read blueprints Ability to use measuring devices Demonstrate excellent interpersonal and team building skills to create effective working coworkers Ability to follow through on commitments and holds team members accountable Strong problem-solving skills Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) Clear and effective verbal and written communication skills Attention to detail and organizational skills Ability to work in a fast-paced team environment Ability to prioritize and multitask What to Expect from an Internship with Cretex Medical? Each summer, we are excited to offer interns countless opportunities to network, learn more about the Cretex family of businesses, and have fun! Here are some things you'll get to experience as an intern with Cretex Medical and its businesses: Work with the latest technologies Challenge yourself and grow your skills Find opportunities to move across our family of businesses Cretex offers internships in many different areas, including Engineering, Human Resources, Information Technology, Marketing, Accounting, Business, and Production Operations. We encourage you to explore the many internship opportunities Cretex Medical could offer you. Internships are available in a variety of locations within the Minneapolis/St. Paul (Minnesota) metro area, including Elk River, Brooklyn Park, Bloomington, Coon Rapids, Anoka, and Dassel. If you have a location preference, please specify that in the job application questions. Here are some of the things that interns have said about working at Cretex: “I enjoyed how integrated the interns were in the workflow. We were working on projects that made an impact for the company. I had opportunities to work with employees from all areas of the company as well as other interns.” “During my internship, I gained firsthand experience in project management, quality systems, and manufacturing best practices. I was able to grow my skills in design by focusing on creating more ergonomic processes for manufacturing. I enjoyed the learning experience and the relationships I developed.” Cretex Intern Benefits: Cretex offers a wide range of benefits for interns including: Eligible for Housing Stipend for Relocation Eligible for Health and Wellness Benefits Career Development Activities Opportunities to Interact with Leadership Company Events Facility Tours Summer Intern Event Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Pay Range USD $25.00 - USD $27.00 /Hr. Company Benefits Benefits: All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.)
$25-27 hourly Auto-Apply 60d+ ago
Quality Engineer Intern - Federal Ammunition
Federal 4.2
Engineering associate job in Anoka, MN
The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries. At The Kinetic Group, our interns play a vital role in advancing our mission to deliver high-quality, reliable ammunition to customers worldwide, offering you a unique chance to make a real impact in an industry fueled by precision and passion. As the Quality Engineer Intern you will have the opportunity to support our Quality Engineering team at Federal Ammunition. This position reports to the Quality Manager and is based out of our Anoka, MN office. What you'll do: Create work instructions and/or operating procedures for new and existing equipment and products. Complete time studies and capacity analysis for bottleneck equipment. Document machine change over tasks and troubleshooting guides to improve machine uptime. Support the Quality Engineering and Operations staff in process improvement activities Experience you bring: Engineering student in an accredited technical college or university. Prefer Manufacturing, Mechanical or Industrial Engineering Proficient in Microsoft Office applications Excellent written and oral communication skills Excellent interpersonal, problem solving, organizational, and time management skills Proficient at handling ambiguity and dealing with multiple priorities Continuous improvement and results oriented Strong interest in working for Federal Ammunition / The Kinetic Group You might have: Hands on experience with Six Sigma tools and lean manufacturing concepts CAD experience (SolidWorks) Statistical problem solving skills such as DOE using Minitab Small Caliber ammunition manufacturing experience Experience using a variety of gages and/or measurement systems Generate reports and summaries of data and work performed. Perform process capability studies as needed. Perform root cause analysis on manufacturing issues and implement corrective actions. Additional Information: Shift: Monday-Friday (8-9 hour) days Summer Internship: May-August Got questions? We've got answers! 👉 Explore our FAQ Page: ***************************************************** Work Environment: Employee work assignments may include tasks working with and/or exposure to potentially hazardous areas, including flammables and explosives. Safety training is provided to all employees to ensure compliance with company and federal regulations. Pay Range: Hourly Rate: $22.00 - $26.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, tuition reimbursement, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled
$22-26 hourly Auto-Apply 44d ago
Membrane Engineering Intern
Veolia 4.3
Engineering associate job in Minnetonka, MN
Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description This is a full-time, 3-month internship, with an anticipated start date in May of 2026. Nature of work: Your responsibilities will include (but are not limited to); * Project Handover: Facilitate the effective handover of projects from the Engineering department to manufacturing, ensuring smooth integration into production * Tooling and Fixtures Development: Design, identify, and produce tooling, jigs, and fixtures to support various teams across the manufacturing facility * Documentation: Create and maintain comprehensive documentation to guide the efficient manufacture of products * Manufacturing Support: Provide engineering support for all plant equipment, including machinery, tooling, rigs, and other production assets * Special Projects: Assist with sourcing and installation of new equipment for use in manufacturing. System design, fabrication of parts and system assembly * Cost Saving Initiatives: Identify areas for cost-saving and implement strategies to improve efficiency and reduce operational costs * Quality Assurance: Investigate and resolve any quality issues within the manufacturing facility, ensuring adherence to company standards and specifications * Team Coordination: Coordinate tasks for the team, monitor work progress, and ensure quality standards are maintained. May take on a coaching or mentoring role for junior team members Qualifications Skills: * Strong problem-solving and analytical skills * Excellent communication skills, both written and verbal * Ability to work collaboratively within a cross-functional team * A willingness to learn manufacturing systems, machinery, and quality control * Experience in cost optimization and identifying efficiencies Education: This role is best suited for anyone currently enrolled in a Bachelor of Engineering (BEng) program (Chemical, Environmental, Industrial, or Mechanical) or a Chemistry Bachelor of Science (BSc) program. Consideration will also be given to other science-based technical programs and degrees. Additional Information Compensation: The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate's knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $21-24/hr. Veolia values diversity and inclusion and is proud to be an equal opportunity workplace. This internship is a paid opportunity and offers students the chance to gain valuable industry experience while contributing to the mission of sustainable water management. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. All your information will be kept confidential according to EEO guidelines. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.
$21-24 hourly 31d ago
2026 Engineering Internship
Horwitz 4.1
Engineering associate job in New Hope, MN
Horwitz is seeking motivated and professional students for our Engineering Internship Program. This hands-on program provides real-world experience across various engineering disciplines, including Estimating, Service, Preconstruction, Construction, and Design. Graduates/ Interns will have the opportunity to work alongside experienced engineers, project managers, and estimators, gaining valuable skills and insights in the field of mechanical engineering. RESPONSIBLITIES/DUTIES BY DEPARTMENT: These responsibilities generally describe the nature of each position and may not be all inclusive: Estimating Assist in reviewing construction drawings and specifications to help develop basic material and labor take-offs for mechanical systems. Support the preparation of cost estimates by organizing vendor quotes, updating Excel worksheets, and learning estimating software tools. Participate in jobsite walkthroughs and internal estimate review meetings to understand field conditions, scope alignment, and the overall estimating process. Service Assist with entering and organizing incoming service requests while learning how calls are reviewed, documented, and prioritized within the service department. Support dispatch and scheduling activities by helping track technician availability, job status updates, and parts-related follow-ups to ensure smooth workflow. Shadow service coordinators and leadership to observe customer communication, dispatch decision-making, and overall service operations. Preconstruction Manage and solicit Requests for Proposals (RFPs) for project planning. Learn to size and select key mechanical HVAC equipment. Attend job site meetings and walkthroughs, supporting the Preconstruction Manager. Assist in project estimating and gain insight into Horwitz's sales process, including equipment selection and procurement. Construction Join project managers on job site meetings and walkthroughs. Support project management on various projects by preparing O&M manuals, performing Revit modeling, and conducting load calculations. Provide additional support during vacation staffing to maintain project continuity. Design Perform BTU load calculations to assist in equipment sizing for specific projects. Use drafting software (e.g., Revit) to create permit and installation-level drawings. Conduct field visits with lead designers to document existing equipment and site details. Engage in team meetings and research to ensure code compliance and design accuracy. Perform other duties as assigned. Conduct yourself in accordance with Horwitz core values: Safe, Accountable, Professional, Motivated, Can Do and Curious. SKILLS/ABILITES: Strong verbal and written communication for collaborating with team members and attending meetings. Ability to analyze blueprints, conduct load calculations, and perform detailed data entry. A demonstrated interest in HVAC, building controls, and mechanical systems is a plus EDUCATION/EXPERIENCE: Enrolled in or graduated with a relevant engineering program/degree (Mechanical Engineering, Electrical Engineering, Construction Management, or a related field).
$28k-44k yearly est. 60d+ ago
Continuous Improvement Engineer Intern - Federal Ammunition
Federal 4.2
Engineering associate job in Anoka, MN
The Kinetic Group is a world leader in the design, manufacturing, and distribution of small caliber ammunition under the iconic brands B&P, CCI, Federal Premium, Fiocchi, HEVI-Shot, Remington and Speer. We have domestic ammunition manufacturing facilities in Minnesota, Idaho, Arkansas, and Missouri, and service law enforcement, government agencies and sporting enthusiasts throughout the world. Today, The Kinetic Group is a part of the Ammo+ division of The Czechoslovak Group (CSG), which holds a diverse portfolio of companies in the defense, security, automotive, aerospace and rail industries. At The Kinetic Group, our interns play a vital role in advancing our mission to deliver high-quality, reliable ammunition to customers worldwide, offering you a unique chance to make a real impact in an industry fueled by precision and passion. As the Continuous Improvement Engineer Intern, you will have the opportunity to collaborate with cross-functional teams to identify opportunities for process optimization and contribute to a culture of continuous improvement. This position reports to the Sr Manager, Ops Support & Special Projects and is based out of our Anoka, MN office. What you'll do: Assist with time studies, data collection, and statistical analysis to identify process improvement opportunities Support Kaizen events, 5S activities, and other Lean initiatives Participate in value stream mapping and process documentation Help prepare reports and presentations summarizing findings and recommendations Collaborate with CI engineers and specialists on improvement projects Observe and learn Six Sigma methodology (DMAIC) and Lean tools in practice Hands-on experience with process improvement projects in a high-volume manufacturing environment Other duties as assigned Experience you bring: Currently pursuing a B.S. in Industrial Engineering, Manufacturing Engineering, or related field Basic understanding of Lean, Six Sigma, and Theory of Constraints concepts Strong problem-solving and analytical skills Effective interpersonal and communication skills (verbal and written) Ability to work independently and manage multiple tasks Proficiency in Microsoft Office (Excel, Word, PowerPoint); familiarity with statistical software (e.g., Minitab) is a plus You might have: Coursework or projects involving Lean/Six Sigma Experience with CAD or 3D printing Familiarity with root cause problem-solving techniques Additional Information: Shift: Monday-Friday (8-9 hour) days Summer Internship: May-August Got questions? We've got answers! 👉 Explore our FAQ Page: ***************************************************** Work Environment: Employee work assignments may include tasks working with and/or exposure to potentially hazardous areas, including flammables and explosives. Safety training is provided to all employees to ensure compliance with company and federal regulations. Pay Range: Hourly Rate: $22.00 - $26.00 The actual annual salary offered to a candidate will be based on variables including experience, geographic location, education, and skills/achievements, and will be mutually agreed upon at the time of offer. We offer a highly competitive salary, comprehensive benefits including: medical and dental, vision, disability and life insurance, 401K, PTO, tuition reimbursement, gear discounts and the ability to add value to an exciting mission! Our Postings are not intended for distribution to or use in any jurisdiction, country or territory where such distribution or use would violate local law or would subject us to any regulations in another jurisdiction, country or territory. We reserve the right to limit our Postings in any jurisdiction, country or territory. Equal Opportunity Employer Minorities/Females/Protected Veteran/Disabled
$22-26 hourly Auto-Apply 44d ago
Quality Engineer Intern - Summer 2026
Cretex 4.0
Engineering associate job in Dassel, MN
Medical Cretex Medical is a family of companies that provides manufacturing and engineering services to medical device OEMs. We offer a complete range of end-to-end manufacturing capabilities, the latest technologies, and the talent to match any manufacturing or engineering challenge. Learn more at ********************** Responsibilities Quality Engineer Intern Position Summary The Quality Engineer Intern will be responsible for providing technical support focusing on Quality related projects. The intern will assist the Engineering department with projects from scope definition through implementation. This position will be located in Dassel, MN. This internship will be required to be on-site, working 40 hours/week. Quality Engineer Intern Duties and Responsibilities Provide internal customer technical support Part manufacturability technical support Assist with the implementation of process and design improvements Support and comply with the company Quality System, ISO, and medical device requirements Read, understand, and follow work instructions and standard work Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance Understand customer needs and the core business markets we serve Qualifications Quality Engineer Intern Qualifications Enrollment in a four-year degree program for Manufacturing, Mechanical, or Industrial Engineering Ability to read blueprints Ability to use measuring devices Demonstrate excellent interpersonal and team building skills to create effective working coworkers Ability to follow through on commitments and holds team members accountable Strong problem-solving skills Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) Clear and effective verbal and written communication skills Attention to detail and organizational skills Ability to work in a fast-paced team environment Ability to prioritize and multitask What to Expect from an Internship with Cretex Medical? Each summer, we are excited to offer interns countless opportunities to network, learn more about the Cretex family of businesses, and have fun! Here are some things you'll get to experience as an intern with Cretex Medical and its businesses: Work with the latest technologies Challenge yourself and grow your skills Find opportunities to move across our family of businesses Cretex offers internships in many different areas, including Engineering, Human Resources, Information Technology, Marketing, Accounting, Business, and Production Operations. We encourage you to explore the many internship opportunities Cretex Medical could offer you. Internships are available in a variety of locations within the Minneapolis/St. Paul (Minnesota) metro area, including Elk River, Brooklyn Park, Bloomington, Coon Rapids, Anoka, and Dassel. If you have a location preference, please specify that in the job application questions. Here are some of the things that interns have said about working at Cretex: “I enjoyed how integrated the interns were in the workflow. We were working on projects that made an impact for the company. I had opportunities to work with employees from all areas of the company as well as other interns.” “During my internship, I gained firsthand experience in project management, quality systems, and manufacturing best practices. I was able to grow my skills in design by focusing on creating more ergonomic processes for manufacturing. I enjoyed the learning experience and the relationships I developed.” Cretex Intern Benefits: Cretex offers a wide range of benefits for interns including: Eligible for Housing Stipend for Relocation Eligible for Health and Wellness Benefits Career Development Activities Opportunities to Interact with Leadership Company Events Facility Tours Summer Intern Event Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Pay Range USD $25.00 - USD $25.00 /Hr. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************
$25 hourly Auto-Apply 60d+ ago

Learn more about engineering associate jobs

How much does an engineering associate earn in Plymouth, MN?

The average engineering associate in Plymouth, MN earns between $44,000 and $86,000 annually. This compares to the national average engineering associate range of $49,000 to $101,000.

Average engineering associate salary in Plymouth, MN

$62,000

$44,00010%

$62,000Median

$86,00090%

What are the biggest employers of Engineering Associates in Plymouth, MN?

The biggest employers of Engineering Associates in Plymouth, MN are:

Danfoss

Job type you want

Full Time

Part Time

Internship

Temporary

Engineering associate jobs in Plymouth, MN - 788 jobs

Engineering Specialist (Flex Staff)

Materials Engineering Intern

Industrial Field Engineer

Manufacturing Engineer

Project Engineer

Engineering Intern

Intern Engineer

2026 Summer Corporate Intern - Engineering

Engineering Intern

Package Engineering Intern (Summer 2026)

Casting Technology Manufacturing Engineer

2026 Engineering Internship

Reliability Engineering Intern

Quality Engineering Intern

Quality Engineer Intern - Summer 2026

Quality Engineer Intern - Federal Ammunition

Membrane Engineering Intern

2026 Engineering Internship

Continuous Improvement Engineer Intern - Federal Ammunition

Quality Engineer Intern - Summer 2026

Learn more about engineering associate jobs

How much does an engineering associate earn in Plymouth, MN?

What are the biggest employers of Engineering Associates in Plymouth, MN?