Engineering associate jobs in Revere, MA - 1,111 jobs

CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

About the role: We are seeking a Technical Field Engineer to provide on-site technical support and ensure seamless connectivity across job sites, trailers, and office environments. This role requires a hands-on professional who can follow established processes, deliver exceptional end-user support, and manage technology deployments in a fast-paced setting. Key Responsibilities Provide face-to-face technical support for end users ranging from executives to interns. Travel to job sites (trailers/buildings) to troubleshoot and resolve technical issues. Prioritize helpdesk tickets via ServiceNow Install, configure, and maintain network connectivity solutions (routers, wireless systems). Assist with ordering and managing equipment for field operations. Support and maintain laptops, iPads, and other mobile devices. Ensure compliance with company processes and procedures during all service activities. Collaborate with internal teams to deliver timely solutions in a busy office environment. Document work performed and maintain accurate service records. Required Skills & Qualifications Experience: Technical support experience or field engineering (face-to-face support preferred; not service desk only). Strong understanding of networking basics and wireless connectivity. Familiarity with common hardware (laptops, tablets) and mobile technology. Excellent interpersonal and communication skills; ability to work effectively with diverse users. Problem-solving mindset with the ability to ask the right questions and adapt quickly. Valid driver's license and reliable transportation for site visits Preferred Attributes Ability to work independently at job sites and prioritize tasks effectively. Comfortable in dynamic environments with multiple ongoing projects. Knowledge of construction or field operations is a plus.

****Senior Software Engineer, Demand Tech********Boston, MA********Hybrid Schedule (M/F remote, T/W/TH in-office)****At Magnite, we cultivate an environment of continuous growth and collaboration. Our work impacts what millions of people read, watch, and buy, and we're looking for people to help us tackle that responsibility with creativity and focus. Magnite (NASDAQ: MGNI) is the world's largest independent sell-side advertising platform. Publishers use our technology to monetize their content across all screens and formats including CTV / streaming, online video, display, and audio. ****About this team:****Our team specializes in building traffic-shaping technology to prioritize the highest-value ad requests at scale. With over 1 trillion daily transactions, a 1% improvement in ad request prioritization impacts 10+ billion transactions daily.****In this role, you will:***** Develop large-scale distributed systems and solve deep technical and mathematical challenges* Solve for large-scale data analysis* Solve problems involving complex mathematical algorithms to optimise traffic consumption* Develop high-performance software and write optimised, low-latency software that routes high volumes of ad request traffic and targets p99 latencies engineers to present and debate tradeoffs to solve the problems we face* An openness to working with the functional programming (FP) paradigm. We attempt to pragmatically apply FP principles where applicable and expect you will too* Experience in designing and implementing high-quality applications, preferably with Scala and Spark.* Familiarity with Kubernetes and other CNCF projects like Prometheus, Argo, helm, etc. are a plus****Our current tech stack:***** Scala for core application development* Spark Structured Streaming, Kafka, Kubernetes, Airflow, Argo Workflows* Combination of Terraform, Helm, and Argo for Cloud-based Kubernetes deployments****Comprehensive Perks and Benefits**:*** Superb Healthcare Coverage for You and Your Family from Day One* Generous Time Off* Holiday Breaks, Summer Fridays, and Quarterly Mental Health Days* Equity and Employee Stock Purchase Plan* Family-Focused Benefits and Parental Leave* 401k Retirement Savings Plan with Employer Match* Cell Phone Subsidy* Fitness and Wellness Reimbursement****Company Culture:****We believe collaboration is essential to success. Magnite's hybrid schedule includes two days worked remotely (Monday and Friday) and three days on-site (Tuesday, Wednesday and Thursday). Our offices provide catered lunches, beverages, snacks, training and development, and office events to support your work week. We also understand you have appointments, families, hobbies, and other commitments. Magnite strives to maintain a healthy work/life integration for all employees so you can bring your best every day - both at work and at home.* Community Service and Volunteer Events* Company-Matched Charitable Contributions* Wellness Coach and Mental Health Support* Career Development Initiatives and a Career Growth Framework* Culture and Inclusion Programs* Bonusly Peer-to-Peer Recognition ProgramThe world's leading agencies and brands trust our platform to access brand-safe, high-quality ad inventory and execute billions of advertising transactions each month. Anchored in bustling New York City, sunny Los Angeles, mile-high Denver, historic London, and down under in Sydney, Magnite has offices across North America, EMEA, LATAM, and APAC.The base salary range for this position, across all United States geographies, is $140,000 - $160,000 per year. The upper portion of the salary range is typically reserved for existing employees who demonstrate strong performance over time. This position is also eligible for annual bonus and company equity.*Magnite is an Equal Opportunity Employer and does not discriminate against applicants due to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, gender identity, sexual orientation or any other federal, state or local protected class.**Our Commitment: We aim to incorporate a wide range of voices into our Magnite culture, cultivating an environment where employees feel welcomed, cared for, and encouraged to freely share ideas. We are committed to employee growth, collaboration, inclusion, and innovation. We invest in Magnite's local communities. We seek talent from all backgrounds to champion corporate values of seeing the big picture and being catalysts of change.***Check out our for Magnite announcements and Ad Tech industry news!******Recruiting Agency Notice****Magnite does not accept agency resumes and is not responsible for any fees related to unsolicited resumes. #J-18808-Ljbffr

A leading technology company in Boston seeks a Senior DocuSign Engineer to lead the design and implementation of DocuSign solutions. The role requires over 5 years of experience in DocuSign, strong technical expertise, and collaboration with cross-functional teams. Ideal candidates will have a Bachelor's degree in Computer Science and a proven track record in optimizing contract management workflows. The position offers competitive compensation and extensive benefits. #J-18808-Ljbffr

About us We are an MIT-born, venture-backed Silicon Valley startup building Engineering General Intelligence (EGI)-an AI Copilot for design and manufacturing. Our mission is to fundamentally reinvent how physical products are designed and built, dramatically accelerating the pace of product development. About the Role You'll play a critical role in designing EGI: AI that understands how to design, reason, and build like an experienced mechanical engineer. In this role, you'll use your deep knowledge of mechanical design and manufacturing to create high-quality reference models, engineering workflows, and datasets that power our AI systems. You'll embed engineering judgment into the training loop and shape how machines learn to solve real-world design and manufacturing problems. Responsibilities Design and build high-quality mechanical components and assemblies in CAD to serve as ground truth for training and evaluating AI systems. Define and maintain standards for model quality, metadata, and annotation to ensure consistency and reliability across datasets. Collaborate closely with ML, software, and product teams to shape dataset requirements and influence model behavior through representative engineering examples. Manage and guide a team of external contractors, including writing SOPs, reviewing output quality, and ensuring timely delivery of data assets What we're looking for Bachelor's or Master's degree in Mechanical Engineering or related field. Strong foundation in machine design, product development, and design for manufacturing (DFM). Experience with one or more CAD platforms (e.g., Siemens NX, SolidWorks) with the aptitude to pick up new ones quickly. Strong attention to detail and appreciation for data/model quality. Excellent written and verbal communication skills, especially when documenting processes or communicating across teams. Experience managing external contractors or vendors, including writing clear standard operating procedures (SOPs), reviewing work quality, and providing feedback. Bonus Points Experience working with Software/ML teams. Experience with CAD automation and parametric model generation. Understanding of how large language models (LLMs) or other ML systems are trained and evaluated. #J-18808-Ljbffr

A biomedical technology company in Boston seeks a Principal Product Development Engineer to lead the design and development of an innovative in vitro diagnostic device. The candidate will apply advanced scientific principles in whole blood hemostasis testing and will work collaboratively within a multidisciplinary team to solve complex challenges in a fast-paced environment. A strong academic background in bioengineering, biochemistry, or analytical chemistry is required along with relevant experience in assay development and device integration. #J-18808-Ljbffr

A 3D printing technology company in Boston is seeking an R&D Reliability Engineer to ensure product robustness through comprehensive testing strategies. You will build and execute validation plans, analyze failure data, and collaborate with design teams to enhance reliability. The ideal candidate should be proficient with electromechanical systems and data analysis, and can implement tests in Python. This role offers a competitive salary and generous benefits, including equity opportunities. #J-18808-Ljbffr

Job Title: Mechanical Engineer IV Zip Code: 01581 Duration:12 Months Pay Rate: $ 66.58 /hr Keyword's: #Westborojobs; #Engineerjobs. Key job responsibilities: * Collaborate with cross-functional engineers to design and execute packaging machinery and automation projects * Lead the mechanical design workstreams encompassing the core system evolution, structural member design including the modular frame, safety/guarding, and incorporation ancillary systems at the project / platform level while ensuring the technical, cost and timeline objectives are achieved * Deliver engineering workstreams including drive system modeling, load and bearing calculations, static and dynamic torque simulations and analysis, 3D and 2D model design including the mechanical BOM generation * Execute the detailed design evolution of modules and subsystems for material specifications, geographic requirements and continuous improvement goals aligned with * MSP"s platform and project level initiatives * Partner with the Electrical Engineering, ensure project documentation is complete and scalable for electrical schematics, BOM, I/O"s and subsystem programs Qualifications: * Experience in developing functional specifications, design verification plans and functional test procedures * Experience working with interdisciplinary teams to execute product design from concept to production * BS in Mechanical or Mechatronics Engineering * 8+ years of design experience for industrial automation * Design of custom mechanical components * Integration of sensors, actuators, and controls hardware with automated machinery Proficiency in 3D design and simulation software including but not limited to Ansys, Creo, Catia, Solidworks Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, colour, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Mentor Technical Group (MTG) provides a comprehensive portfolio of technical support and solutions for the FDA-regulated industry. As a world leader in life science engineering and technical solutions, MTG has the knowledge and experience to ensure compliance with pharmaceutical, biotechnology, and medical device safety and efficacy guidelines. With offices in Caguas, PR, Boston, MA & San Francisco, CA and we serve life sciences clients in six global markets: United States, Puerto Rico, Dominican Republic, Mexico, Germany, Canada, and South America. Responsibilities Engineering Experience in Medical Device Industry Problem Solving Knowledge (Yellow or Green Belt knowledge) Responsibilities may include the following and other duties may be assigned. Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations. Qualifications Requirements/Knowledge/Education/Skills BBA in Engineering Knowledge in CSV Problem Solving Knowledge (Yellow or Green Belt knowledge) Mentor Technical Group is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. #J-18808-Ljbffr

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess' patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world. The Mechanical Engineer is a hands-on position involving designing, building, and maintaining automated production equipment throughout its lifecycle. This role will be responsible for design, assembly, installation, qualification, ongoing maintenance, and optimization of automated production systems requiring expert troubleshooting of mechanical assemblies and systems, performing root cause analysis, and implementing corrective actions to ensure efficient, reliable manufacturing operations. Responsibilities Design, implement, and maintain novel automated systems and solutions that contribute to current manufacturing and scale up of manufacturing operations to eventual commercialization. Document equipment and procedures though User Requirements Specifications, detailed mechanical, electrical, and assembly drawings, and use and maintenance SOPs. Contribute to the implementation and maintenance of the Quality Management System. Collaborate closely with cross-functional teams to support product development and manufacturing activities, and to identify and resolve manufacturing issues. Contribute to continuous improvement to increase safety, quality, and efficiency of manufacturing. Qualifications BS or advanced degree in Mechanical Engineering or a related discipline. At least 2-5 years of experience in designing, building, installing, qualifying, and maintaining automated systems for high volume medical device manufacturing. Experience writing and executing IQ, OQ and PQ protocols. Experience developing URS, FAT and SAT documents for automated equipment 3D CAD (SolidWorks or similar) as well as Mechanical design of fixtures, assemblies and equipment. Understanding and working knowledge of mechanical linkages, power transmissions and practices. Understanding of diverse fabrication techniques, manufacturing processes, and Design for Manufacturability Excellent time and project management skills and proven ability to meet goals and deadlines. Demonstrated abilities to learn new skills and fields, creatively solve challenging technical problems, think independently, and work collaboratively in diverse multidisciplinary teams. Entrepreneurial spirit and drive to positively impact global human health. At Vaxess, we're bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to ******************.

Engineering Technician - Medical Device R&D temp to perm Marlboro, MA Support engineers in the development and testing of single-use medical devices. This hands-on role involves working with Engineers testing prototypes, performing validation and system testing, and accurately documenting results in a regulated environment. Responsibilities Perform validation, strength, and system testing on medical devices Work with tubing and small mechanical components Set up and maintain test equipment; perform basic troubleshooting Document test results and communicate findings to engineers Support calibration and quality documentation requirements Qualifications Associate degree or equivalent hands-on experience 1+ year experience in technical, lab, R&D, or manufacturing role Strong mechanical aptitude and troubleshooting skills Ability to follow procedures and document work accurately Medical device or regulated environment experience preferred.

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. What this job involves - As a Project Mechanical Engineer at JLL, you will play a pivotal role in delivering exceptional mechanical engineering solutions that shape a brighter way for our clients and their built environments. You'll be responsible for the design, implementation, and oversight of mechanical systems across diverse commercial real estate projects, from concept through completion. Working within our culture of collaboration, you'll partner with multidisciplinary teams, clients, and contractors to ensure mechanical systems meet the highest standards of performance, efficiency, and sustainability. This role offers opportunities to strengthen and advance your career while contributing to innovative projects that transform how people experience their workspaces. You'll manage project timelines, budgets, and technical specifications while maintaining JLL's commitment to excellence and client satisfaction. This position supports Amgen within the biopharmaceutical industry. What is the day to day? Provide engineering technical leadership for capital improvement projects, including feasibility studies, project development, scope definition, and design reviews to ensure compliance with company standards and applicable laws Review and approve design packages, specifications, and turnover documentation while ensuring proper commissioning, qualification testing (OAT/FAT), and site acceptance procedures are followed Serve as primary liaison for all building-related issues and projects, coordinating with internal stakeholders, external vendors, and contractors to address maintenance and facility needs Oversee facility operations and maintenance improvements, developing strategies to optimize building systems performance and implementing industry best practices and upgrades Maintain comprehensive documentation for building systems, equipment, and maintenance procedures while ensuring all process diagrams and system drawings remain current and accurate Conduct Global Lifecycle Asset Management (GLAM) assessments and develop maintenance schedules, including cold-shutdown preventive maintenance activities and inventory requirements for critical parts Perform root cause analyses and develop corrective/preventative actions for technical problems, creating response flow charts and failure mode analyses to support operations Ensure compliance with safety regulations, building codes, environmental standards, and all applicable laws while maintaining required certifications and licenses Manage budgets and resources effectively to meet facility management objectives while providing capital justification and budget support for projects Support reliability-centered maintenance activities and provide technician training where appropriate to enhance operational capabilities and system understanding Required Qualifications: BA/BS in Mechanical Engineering, or other related engineering degrees. 4+ years' experience working in the mechanical engineering discipline, or equivalent combination of education and experience. Experience and knowledge of ASME, ASHRAE & NFPA requirements for compliance and system analysis. Demonstrated proficiency in facilities engineering focused in design/operation including HVAC, industrial central utility systems, purified water (RO/DI), steam, chilled water, and compressed gases. Preferred Qualifications: EIT, PE or related certifications Direct experience with regulated environments (e.g. GMP, OSHA, EPA, etc.) In-depth understanding of standards and practices developed by regulatory agencies. Ability to perform field work and troubleshoot mechanical devices. Ability to train and coach operations teams to work with and operate mechanical systems. Ability to work with multiple teams consisting of operational staff, client stakeholders, project managers, external engineers and architects, vendors, and subcontractors. Ability to diagnose, repair, and return mechanical systems back to efficient operation. Knowledge of programming, installation, start-up, troubleshooting, and repair of automation control systems is a plus. Location: On-site in Cambridge, MA This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Estimated compensation for this position: 115 000.00 USD per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: On-site -Cambridge, MA Job Tags: If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement . For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here . Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at . This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our Supplemental Privacy Statement which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

Granite delivers advanced communications and technology solutions to businesses and government agencies throughout the United States and Canada. We provide exceptional customized service with an emphasis on reliability and outstanding customer support and our customers include over 85 of the Fortune 100. Granite has over $1.85 Billion in revenue with more than 2,100 employees and is headquartered in Quincy, MA. Our mission is to be the leading telecommunications company wherever we offer services as well as provide an environment where the value of each individual is recognized and where each person has the opportunity to further their growth and achieve success. Granite has been recognized by the Boston Business Journal as one of the "Healthiest Companies" in Massachusetts for the past 15 consecutive years. Our offices have onsite fully equipped state of the art gyms for employees at zero cost. Granite's philanthropy is unparalleled with over $300 million in donations to organizations such as Dana Farber Cancer Institute, The ALS Foundation and the Alzheimer's Association to name a few. We have been consistently rated a "Fastest Growing Company" by Inc. Magazine. Granite was named to Forbes List of America's Best Employers 2022, 2023 and 2024. Granite was recently named One of Forbes Best Employers for Diversity. Our company's insurance package includes health, dental, vision, life, disability coverage, 401K retirement with company match, childcare benefits, tuition assistance, and more. If you are a highly motivated individual who wants to grow your career with a fast paced and progressive company, Granite has countless opportunities for you. EOE/M/F/Vets/Disabled General Summary of Position: Granite is a leading provider of managed security and networking platforms. The NetOps team supports a wide range of technologies and services including Fortinet SD-WAN, Palo Alto, Cisco, and Juniper. Within this team, the Application Automation practice focuses on improving operational efficiency and scalability through scripting, automation, and tool development. This position plays a key role in supporting large enterprise environments by developing automation frameworks, streamlining complex deployments, and reducing manual intervention in day-to-day operations. Responsibilities include solution design, automation development, support for new product rollouts, Tier 3 escalations, and collaboration with engineering teams to build repeatable, efficient processes. Duties and Responsibilities: Design, develop, and maintain automation scripts and tools to support network deployments, configuration management, and troubleshooting. Collaborate with engineering and operations teams to identify repetitive tasks and build automated solutions to reduce manual workload. Support new technology rollouts by creating scalable deployment frameworks and configuration templates. Respond to Tier 3 technical escalations, particularly those involving process inefficiencies, integration challenges, or repeat issues solvable via automation. Research and test emerging network automation technologies to improve toolsets and practices. Document automation procedures, scripts, and best practices for operational consistency and knowledge sharing. Ensure all automated solutions align with security and compliance standards. Participate in audits and reviews to ensure reliability and maintainability of automation systems. Required Qualifications: Bachelor's degree in computer science, Network Engineering, or a related field. Proficiency in scripting languages such as Python, Bash, or PowerShell. Strong understanding of APIs, network configuration models (e.g., NETCONF, RESTCONF), and configuration automation tools (e.g., Ansible, Terraform). Experience supporting enterprise-grade networks, preferably in a service provider or managed services environment. Demonstrated ability to troubleshoot complex network issues and implement automated solutions. Excellent communication and documentation skills

Job Title: AI Engineer Trainee Type: Full-Time / Unpaid Trainee Program Company: FocusKPI Please submit your resume and a brief cover letter outlining your experience with relevant projects, coursework/work experience, and why youre interested in this role to ***************** . We are excited to invite aspiring software engineers and AI enthusiasts to join our 3-month AI Trainee Program, designed to fast-track your skills in building and implementing AI solutions. This program provides hands-on experience with real-world projects, enabling you to enhance both your software engineering and AI expertise. Under the mentorship of our experienced team, youll refine your skills in designing scalable systems, deploying machine learning (ML) models, and building APIs. Exceptional performance during the program may lead to a paid internship opportunity, setting the stage for a promising career in AI and software development. About the Program: This program is ideal for individuals passionate about AI and software engineering, particularly in Natural Language Processing (NLP), Retrieval-Augmented Generation (RAG), and software deployment. Youll gain practical experience in building and deploying machine learning models, integrating them into vector-based solutions, and creating robust software infrastructure for scalable applications. The program focuses on your growth, providing you with the tools and knowledge to succeed in the dynamic field of AI-driven software development. Ideal Qualifications: We welcome candidates with the following background: Bachelors or Masters degree in Computer Science, Data Science, or related fields. Interest and hands-on experience with NLP, RAG, and machine learning frameworks. Proficiency in Python and API development using frameworks like FastAPI. Strong problem-solving skills and a detail-oriented approach to software development. Key Learning Opportunities: Gain hands-on experience in designing and implementing NLP models for tasks such as text classification, sentiment analysis, and named entity recognition. Learn and apply Retrieval-Augmented Generation (RAG) frameworks integrated with vector-based solutions to enhance system performance. Build and maintain scalable APIs (e.g., using FastAPI) for real-world deployment of AI models. Develop expertise in containerization tools like Docker to streamline deployment and scalability. Gain practical experience in implementing CI/CD pipelines for automated testing, integration, and deployment to ensure reliable and efficient delivery of AI solutions. Acquire practical knowledge in data preprocessing, feature extraction, and building robust data pipelines for large-scale applications. Work on integrating ML models into end-to-end production systems, focusing on scalability and performance. Strengthen your software engineering skills, with exposure to tools like Python, FastAPI, and cloud platforms (AWS, Google Cloud, Azure). Enhance your collaboration and documentation skills by working in a dynamic, remote team environment.

About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible™. Learn more at ************** and on LinkedIn and Twitter (X) . Job Description: As an Algorithm Engineer Intern, you will support our team in developing and optimizing algorithms for various applications, including machine learning, data analysis, and signal processing. This internship provides a learning opportunity to work on real-world problems, collaborate with experienced engineers, and contribute to the creation of scalable and high-performance solutions. Key Responsibilities: Assist in the development and testing of algorithms for data processing and machine learning. Conduct research to understand how different algorithms impact system performance. Collaborate with cross-functional teams on software development projects. Participate in debugging and code optimization tasks. Support in maintaining and improving existing codebase. Skills You Will Need to Be Successful: Programming Languages: Proficiency in C, C++, or Python. Machine Learning: Understanding of machine learning algorithms and concepts. Signal Processing: Familiarity with basic signal processing techniques. SQL and Bash Scripting: Understanding of SQL queries and scripting to automate tasks. Strong problem-solving and communication skills. Minimum Qualifications: Currently pursuing a degree in Computer Science, Engineering, or a related field. Familiarity with at least one programming language (C, C++, Python). Basic understanding of algorithms and data structures. Why You'll Love Working at ADI At Analog Devices, you'll be part of a collaborative and innovative team that's shaping the future of technology. We offer a supportive environment focused on professional growth, competitive compensation and benefits, work-life balance, and the opportunity to work on cutting-edge projects that make a real impact on the world. You'll have access to continuous learning opportunities and mentorship from industry experts. Join us and help create the technologies that bridge the physical and digital worlds, making a tangible difference in how people live, work, and connect. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. Job Req Type: Required Travel: Shift Type:

Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the Northeast . We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! Detailed Description: How Will You Make an Impact?: Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with people managers, project managers, engineers, scientists, and multidisciplinary teams to support projects in water, wastewater, drinking water, environmental engineering, design, sustainability, climate mitigation, and more. * Assist in the preparation of technical deliverables including but not limited to calculations, reports, drawings, specifications, and memoranda. * Potential to participate in field work and site visits to support project design, construction, and data collection activities. * Perform data entry, analysis, and visualization to support engineering and scientific evaluations. * Ensure quality and accuracy by adhering to Brown and Caldwell's QA/QC processes and standards. * Communicate effectively with internal teams and external clients to coordinate project tasks and deliverables. * Support engineering services during construction by reviewing submittals, conducting inspections, and verifying conformance with plans and specifications. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in Environmental, Civil, Mechanical, Structural, Electrical, Chemical Engineering or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act #Intern26

The Disaster Engineering Specialist: - Conducts site inspections to validate and record infrastructure damage to include: taking photographs, making site sketches, and writing detailed damage descriptions. Develops and reviews scopes of work and cost estimates, including code and standard requirements. - Reviews and analyzes engineering reports, designs, and as-built plans. - Makes recommendations regarding claim eligibility. Develops or evaluates hazard mitigation proposals and benefit-cost analyses. Works with applicants to prioritize their projects, facilitates applicant meetings throughout the program delivery and recovery stages, and communicates the final determination to the applicants. - Provides analyses and updates reports, participates in status update meetings with FEMA, and identifies the need for technical specialists. - May coordinate and complete basic to moderately complex site inspections to validate and record damage to assist in the FEMA Public Assistance grant delivery process. - Other duties as assigned. \#LI-LP2 **Job Title:** FEMA - Engineering Specialist **Group:** WAF Field Mod Fringe **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering - 5 years of in-field experience or 2 years of in-field of expertise with a professional registration. - Domestic travel is required. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. Citizen and be able to obtain a FEMA Badge, which includes a background investigation for a Public Trust position. - Working knowledge of design applications and technical knowledge. - Knowledge of technologies and methodologies in the use of construction materials. Good organizational skills to balance and prioritize work. - Strong attention to detail. - Good written and oral communication skills. - Ability to adapt to change quickly and remain flexible. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $33.60 **Pay Range Maximum:** $67.20 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work in office and field locations as needed. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are excited to announce that CDM Smith won the next 5-year contract for Public Assistance Technical Assistance Contractors - PA TAC V in the West Zone. The West Zone includes Alaska, Washington, Oregon, Idaho, Nevada, California, Arizona, Northern Mariana Islands, American Samoa, Guam, Hawaii, Nebraska, Iowa, Kansas and Missouri. We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens.

Principal Product Development Engineer to join a team of scientists and engineers located in our Boston, MA Research and Development Systems Engineering Laboratory contributing to the design and development of an in vitro diagnostic (IVD) device. This role involves applying advanced scientific principles and creating reliable, accurate, and regulatory-compliant clinical diagnostic solutions in whole blood hemostasis testing. The focus of this position will be to evaluate and develop novel assay designs to drive innovative solutions to complex issues. This individual will be both a leader and collaborator within the multidisciplinary development project team to ensure timely and proficient completion of projects in a fast-paced and evolving environment. The ideal candidate will have a strong background in bioengineering, biochemistry, analytical chemistry, or similar fields combined with experience in assay development and device integration. We are seeking a highly skilled and innovative **Key Responsibilities** Perform analytical performance studies to ensure product requirements are met.Work with the clinical science team to write clinical trial protocols and reports.Contribute to the management of the laboratories including tracking calibrations, environmental monitoring, safety hazards, and other tasks, as required.Exhibit highly effective communication and collaboration skills that can be applied across functions. **Qualifications** **Education:** Ph.D. or M.S. in Bioengineering, Biochemistry, Analytical Chemistry, or related field. **Experience:** Experience developing and optimizing assays on disposable microfluidic or cartridge-based platforms.Experience in reagent formulation and stabilization for microfluidic applications (small-volume drying, bead-based reagents, in-channel drying, long-term stability on plastic substrates).- **Preferred Experience**Hands-on experience with developing assays or diagnostic platforms.Experience with data analysis software and statistical tools. **Skills:** Strong knowledge of biochemical, reagent-driven, clinical diagnostics.Familiarity with regulatory requirements (FDA, CLSI, IVDR, ISO standards).Excellent problem-solving, project management, and communication skills.Depending on your location, you may be eligible for more detailed information related to the compensation and benefits related to this job posting. If you believe you may be entitled to such information by law, you may contact **************, Monday through Friday, 7:30 a.m. - 5 p.m. ET or email *********************. #J-18808-Ljbffr

A leading technical solutions provider is seeking an engineer specialized in the medical device industry. The role involves designing manufacturing processes and ensuring compliance with safety regulations. Candidates should have a BBA in Engineering, knowledge in CSV, and problem-solving skills (Yellow or Green Belt). The position offers an opportunity to work with innovative technologies in a dynamic environment located in Caguas, Puerto Rico. #J-18808-Ljbffr