Engineering associate jobs in Rochester, NY

Project Engineer-Mechanical_Rochester, NY_Full-Time (FTE)_Direct Hire Project Engineer-Mechanical Job Type: Full-Time (FTE) Base Salary: $100,000 to $150,000+Best-in-class benefits Industry: Construction & Trades Job Category: Engineering Job Description: Responsibilities: *Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations. *Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs. *Coach/Mentor junior staff as a technical expert. Requirements: *Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA. *Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite. *Ability to work in a team and communicate effectively both written and verbally. *Energy Modeling experience (Carrier HAP, TRANE TRACE, or EQUEST), LEED Green Associate and Commissioning experience, preferred. *Experience, Education, and Certification *BS in Mechanical Engineering/Engineering Technology *NYS PE required *10+ years of post-college experience. *Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection. *Experience designing HVAC and plumbing systems for schools, healthcare facilities and commercial projects is preferred. Work Environment: *Professional in-office environment *May require travel to New York state job sites 10% of the time. Physical Demands: *The job requires prolonged periods of sitting at a computer. *Travel may be required within NY State. Benefits - Full Relocation Assistance Available - Possible for ideal candidate Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally

iWorld Professionals is seeking multiple PLC Manufacturing Engineering Technicians for our client in Rochester NY. Top hourly rates, excellent benefits and bonus opportunity. The PLC Manufacturing Engineering Technician will support production operations by troubleshooting equipment, improving manufacturing processes, and assisting with the development and maintenance of custom machinery. This is a hands-on role ideal for someone with a mechanical or technical background who enjoys problem-solving and working with a variety of automation and production technologies. PLC Manufacturing Engineering Technician Responsibilities: Diagnose, repair, and perform preventative maintenance on a variety of manufacturing equipment, including pneumatic, hydraulic, mechanical, and chemical systems Troubleshoot custom machinery and testing equipment in a high-paced production environment Support engineers with the design, development, and implementation of new or modified tooling, fixtures, and equipment Work with automation technologies, including PLCs (Allen Bradley), HMI interfaces, vision systems (Keyence, Cognex), and robotic systems (Fanuc, Epson) Use hand tools, machine tools, and fabrication equipment to repair or modify components and systems Stay current with industry best practices through training, publications, and peer collaboration PLC Manufacturing Engineering Technician Qualifications: Strong ability to interpret technical drawings, manuals, and schematics Familiarity with a variety of diagnostic tools and measuring instruments Working knowledge of electronic systems, analog/digital circuitry, hydraulics, and machine automation principles 2+ years of experience in a manufacturing or production support role preferred Pay range $28/hour - $34/hour plus benefits, over-time and bonus. Apply today to iWorld Professionals for immediate confidential consideration.

Mechanical Engineer (CAPEX Projects) $85K - $115K + Sign on Bonus + PTO + National Holidays + Medical + Dental + Vision + Life Insurance + 401K + Company Computer + Car Manufacturer Discounts + Other Excellent Benefits Medina, New York (Commutable from Lyndonville, Ridgeway, Batavia, Lockport, Albion, Holley, Clarence, Buffalo, Rochester) Are you a Mechanical Engineer with a strong knowledge of metal fabrication, looking to put your own stamp on a department at an industry leading organization? This is an outstanding opportunity to be regarded as a go-to engineer within the business, where your mechanical ability and hands-on approach will directly impact the future trajectory of the company. This is a fantastic time to join this expanding, industry leading organization, who are renowned for their exceptional quality and employee satisfaction. In this immersive, high-impact role, you will act as the main point of reference for all mechanical systems, components and solutions. The position allows you to utilize your expertise in machining, fabrication and industrial manufacturing, applying your hands-on approach to steel conversion, mechanical design and equipment installation projects. This role would suit a Mechanical Engineer with strong knowledge of metal fabrication, looking to oversee capital expenditure projects and progress towards senior leadership. The Role: Drive the engineering process from initial design to build and installation. Perform forging, welding, and fabrication processes on diverse machinery components and assemblies. Develop and implement capital expense projects. The Candidate: Strong experience and knowledge of metal fabrication. Prior experience carrying out capital expenditure projects. Industrial Manufacturing, Machine Shop or Automotive background. Degree qualified. To apply for this role or to be considered for further roles, please click "Apply Now" or contact Oliver George at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Mechanical Engineer, Senior Mechanical Engineer, Mechanical Design Engineer, Mechanical, Mechanics, Forging, Welding, Fabrication, CNC, Machining, Industrial, Automotive, CAPEX, Capital Expense Projects, Mechanical Design, Degree Qualified, Engineering, Medina, New York.

We are looking for a Manufacturing Mechanic to join our Finishing team in Rochester, NY. This Manufacturing Mechanic position will work both independently and with other members of our maintenance and engineering teams to provide various types of support for equipment in our Finishing manufacturing areas. As a Manufacturing Mechanic, you will have the following responsibilities: • Provide multi-discipline capability to repair, maintain, install and make improvements to Finishing processing equipment (includes mechanical, some electrical, pneumatics, hydraulics) • Work with other members of the Finishing team to resolve equipment issues • Perform alignment and adjustments as needed on production equipment • Perform preventive maintenance (PMs) on a wide variety of Finishing equipment • Utilize hand tools as well as maintenance shop equipment to perform tasks as needed Required Skills/Experience: • Highly involved and motivated with a high level of mechanical / Some electrical troubleshooting skills • Ability to change focus based on priorities • Mechanical equipment repair training and/or demonstrated experience • Able to read and interpret mechanical/electrical machine drawings • Able to work on tasks requiring high precision and high level of detail • Significant walking or other means of mobility • Ability to work effectively with minimal supervision • Must have ability to work individually and with a team as needed • Good team player - willing to be flexible and work with maintenance trades as needed • Excellent safety record - places safety and environment as top priority in all work • Knowledge of Lock Out / Tag Out process • Must be able to work in dark-room conditions if needed • Able to work occasional overtime • Able to work in standing position for extended period of time • Wear personal protective equipment as required • Good communication skills for daily interaction with maintenance and operations staff • Working knowledge of Microsoft Office and maintenance software tools. • Working knowledge of machine tools.... Lathe, milling machine, grinders, etc.. EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $32.00 - $35.00 Experience Level: 5-10 Years Requisition ID: 1577

Mechanical Engineering Intern-Spring Semester The Mechanical Engineering Intern provides support to Engineering, R&D, Manufacturing and Quality, in various capacities. Essential Duties and Responsibilities include the following. Other duties may be assigned. Conduct experiments as defined by Engineering and other groups. Support development/R&D activities via conducting experiments and summarizing findings, building mechanical and opto-mechanical assemblies, etc. Assist in developing test plans. Execute test plans, summarize/analyze data and report findings. Utilize sophisticated metrology equipment including interferometers, laser position measurement equipment, ball-bar motion equipment, rotation measurement equipment, temperature, fluid flow and fluid pressure measurement devices. Communicate frequently with team members. Openly brainstorms with team members. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience - Currently enrolled in a Bachelor's or Master's degree program in Mechanical Engineering or a closely related field. Relevant coursework in areas such as machine design, dynamics, fluid mechanics, and magnetics. Previous internship or co-op experience in a mechanical engineering role a plus. Working knowledge of machine shop equipment and tools. Machining experience is a plus. Familiarity with a variety of measurement tools, data acquisition systems and sensors. Experience with Six Sigma methodologies a plus. Experience with Geometrical Dimensioning and Tolerancing methods a plus. Experience with CAD software for creating detailed mechanical designs, PTC CREO detailing experience a plus. Computer Skills: Experience with Excel or Mini-Tab to capture, graph, analyze and communicate test data is preferred. Basic word processing, spreadsheet, and presentation software skills are required. Demonstrated aptitude for learning new software. Technical - Strong technology perspective particularly related to the optics industry through prior experience. Travel - Travel is not a primary part of this job. The position is an hourly paid position with a pay range of $22.00 to $27.00 based on the candidates education level, and prior internship and project related experience. We would prefer a candidate who can work 40 hours a week during the internship period, but would consider a candidate interested in part-time (less than 40 hours). QED Technologies is an Equal Opportunity Employer

We are currently hiring a Junior Mechanical Engineer in our Building Engineering Division at our Rochester office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Junior Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties: * Completion of calculations for design purposes * Conduct field work to document existing conditions * Development of drawings with building modeling software * Work with senior engineers to complete project designs Salary Range: $60,000 - $68,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location.

Job Description CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Seeking a detail-oriented Civil Field Engineer to lead on-site investigations, perform specialized inspections, and oversee material testing. This role involves managing projects from start to finish, conducting precise engineering calculations, and delivering accurate, timely reports that meet industry standards. Responsibilities Conduct specialized inspections and field evaluations, including soils, concrete, masonry, and steel material testing. Perform geotechnical investigations, such as test boring and test pit observations, supported by laboratory analysis and accurate geotechnical calculations. Collaborate with Senior Professional Engineers to execute a wide range of field and technical tasks. Prepare detailed engineering studies and comprehensive reports that meet project and regulatory standards. Coordinate and manage projects related to Special Inspections and Construction Materials Testing, ensuring timely delivery and quality outcomes. Implement rigorous Quality Assurance protocols, maintaining strict adherence to technical standards, codes, and best practices in both field and laboratory settings. Commit to professional growth through continuing education and maintaining current certifications. Qualifications Bachelor's degree in Civil Engineering or a closely related discipline. Engineer-in-Training (E.I.T.) certification required. Proficiency in Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting. Strong interpersonal skills with the ability to build and maintain effective relationships with managers, team members, and clients. Exceptional organizational and time-management abilities to handle multiple priorities efficiently. Knowledge of construction materials, procedures, and documentation is highly desirable. Valid driver's license and ability to travel to project sites as needed. Compensation: $24 - 30/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR aAAXGI0ew9

About the Role This team member will play a critical role within our MEP team, leading mechanical system designs, performing complex calculations, selecting equipment, and managing the preparation of engineering documents. The role involves collaborating with senior engineers, mentoring junior staff, and ensuring compliance with industry standards, energy codes, and best practices for HVAC, plumbing, and mechanical building systems. Key Responsibilities Lead and oversee the design of HVAC, plumbing, and mechanical building systems. Conduct load calculations, energy modeling, system sizing, and equipment selection for various projects. Utilize AutoCAD and Revit to develop and refine engineering designs and construction documents. Research and ensure compliance with building codes, energy efficiency requirements, and industry standards. Manage projects independently or alongside senior engineers, ensuring deadlines and budgets are met. Mentor junior engineers and technicians, providing technical guidance and knowledge-sharing. Assist in client communications, site visits, and coordination with multidisciplinary teams. Prepare technical reports, engineering specifications, and cost estimates. Qualifications 5-9 years of experience in mechanical engineering, HVAC design, or a related field. Bachelors degree in Mechanical Engineering preferred. Proficiency in AutoCAD, Revit, and engineering software for mechanical system design. Strong leadership, verbal, and written communication skills, with the ability to collaborate across teams. In-depth knowledge of HVAC, plumbing, and energy-efficient mechanical systems. Holds an Engineer-in-Training (EIT) certification or is working toward a Professional Engineer (PE) license. Benefits Holidays PTO Health Insurance FSA/ HSA Life Insurance 401(K) plan Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife ultra-filtered milk; Core Power High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. job purpose: The Engineering Technician for filler is a crucial role within the Engineering Department responsible for ownership of the reliability, improvement and operational expertise across filler & packaging equipment in the Webster facility. They will provide technical solutions and expertise to Operations and Maintenance, to build out and improve the processes and routines across filler & packaging equipment. They will manage and oversee overhaul maintenance, design changes, and standard creation while assisting the team responsible for operational reliability, top loss improvements, and capital projects. This individual will plan, direct, and coordinate team activities including all projects with necessary vendors and in-house resources. responsibilities: Acts as a subject matter expert capable of defining operational standards and maintenance practices for filler & packaging equipment. Optimize machine performance and implement corrective, preventive and predictive actions to minimize downtime. Enhance operational efficiency by developing and implementing process improvements, leading reliability routines to eliminate machine issues and create/maintain comprehensive documentation (SOPs, PM guidelines, etc.). Effectively communicates and collaborates with diverse teams (operators, technicians, engineers, vendors) to troubleshoot issues, lead & implement projects, and ensure seamless production flow. Takes ownership of filler & packaging equipment's OEE, lifecycle, tracking parts, managing inventory, executing preventive maintenance, and leading equipment rebuilds/upgrades to maximize performance. Leverages data analysis to monitor equipment performance, identify root causes of failures, and implement data-driven improvements to optimize efficiency and quality. Fosters a culture of continuous improvement, proactively identifying and implementing innovative solutions to enhance processes, reduce waste, and drive overall operational excellence. skills/qualifications required: Preferred minimum of 4 years' experience in Consumer Packaging Goods & packaging equipment. Exhibits a strong mechanical aptitude, proficient in troubleshooting 90%+ of technical issues. Ability to update P&ID's, mechanical/electrical prints. Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community. Ability to train staff, including organizing, prioritizing, and scheduling work assignments. Ability to analyze and assess training and development needs. Skilled in BDA and RCA initiatives with the ability to lead those initiatives. Able to understand and utilize engineering drawings, operating manuals, and blueprints to conduct business. Ability to handle ambiguity and work in a fast paced, entrepreneurial environment. Aseptic/Dairy experience preferred. Knowledge of USDA, State, Federal regulations for a dairy manufacturing facility a plus working conditions and physical requirements: Ability to lift a minimum of 40 lbs. on an occasional basis Ability to stand for extended period Climb ladders and work at elevations of 75 feet. food safety requirements: Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required position location: Webster, NY reports to: Engineering & Reliability Manager travel requirements: 50% to begin than exempt/nonexempt: non-exempt base pay range: $36-$39 fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email ******************** . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Exempt No Work Schedule Full Time Division Engineering Reports To Director of Engineering and Construction Assist with the planning, design, permitting, and construction of Company facilities. Duties and Responsibilities ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. * Coordinate the planning, application, design, and construction of new customer service lines. * Review active construction projects to ensure that specifications, plans, procedures, and permits are being followed. * Assist in the preparation of permit applications, reports, etc. * Conduct hydrant flow tests. * Maintain, organize, and archive data regarding company assets (drawings, specifications, etc.) * Gather field data using various equipment, including global positioning system (GPS) collection units. * Coordinate responses to external requests for mapping data (PA One Call, governmental agencies, etc.) * Develop drawings in computer-aided design (CAD) format for Company projects. * Be available for emergency duty as assigned. * Consistently demonstrate positive and professional behavior with all individuals contacted on behalf of the Company including customers and employees. Qualification Requirements EDUCATION and/or EXPERIENCE: * Associate degree in engineering technology, Computer Aided Design (CAD), or related discipline from an accredited educational institution * Minimum of 2 years of related work experience required. CERTIFICATES, LICENSES, REGISTRATIONS: * Possess a valid PA driver's license. * Backflow Device Tester Certification and a PA Class E Water System Operator's license required within one year of employment. OTHER SKILLS AND ABILITIES: * Significant course work and experience with AutoCAD software products is essential. * Proficiency with Microsoft Office, ESRI Geographic Information System (GIS) products, and GPS equipment is highly desirable. OTHER SKILLS: * Strong and effective communication and presentation skills, both oral and written. * Strong comprehension skills. * Strong problem-solving and critical-thinking skills. * Ability to read, analyze, and interpret drawings, graphs, formulas, technical journals/documents, or governmental statutes and regulations. * Proficient use of standard office equipment. * Proficient in Microsoft Suite products. * Proficient use of AutoCAD, GIS software, GPS software and hardware. * Proficient with Engineer software packages such as WaterCAD and SewerCAD. Physical Demands PHYSICAL DEMANDS: * Required to sit for extended periods of time. * Required to sit, stand, and walk; occasionally required to stoop, kneel, crouch, and ascend and descend stairs. * Required to reach with hands and arms and push items overhead. * Regularly lift/move up to 15-25 lbs. * Required to talk, hear, and see. Vision requirements for this position include close vision, distance vision, peripheral vision, depth perception, ability to adjust focus and ability to differentiate between colors. * Dexterity is mandatory as this job requires frequent use of hands and fingers, including keystrokes on computer keyboard and calculator. * The employee must be able to work under stress and work additional hours to meet reporting deadlines. * Ability to drive a company-owned vehicle to visit field operations as necessary. * Ability to wear personal protective equipment (PPE) including gloves, hard hats, safety glasses, and other PPE as required. WORK ENVIRONMENT: * The position primarily works in an office environment. * The noise level in the work environment is usually moderate. * Frequent interactions with other employees. * While performing the duties of this job, the employee frequently works in outside weather conditions. THIS IS A SAFETY-SENSITIVE POSITION AND WOULD REQUIRE COMPLIANCE WITH ALL APPLICABLE SAFETY GUIDELINES AND REGULATIONS. This is a Collective Bargaining Unit position No Apply Now

Join our Team as a Test Engineering Technical Specialist! The Role: We're seeking a passionate and dedicated Test Engineering Technical Specialist who brings enthusiasm and expertise to the table. You'll play a key role in supporting the development and testing of energy storage systems and the equipment used to operate them. You'll collaborate with a diverse group of engineers to build, repair, and test both prototype and production systems. Your work will directly contribute to advancing our technology in a fast-paced and supportive environment. We value innovative and creative ideas-yes, even during meetings (where snacks are always welcome). If you enjoy tackling challenges with positivity and a bit of humor, you'll feel right at home here. What You'll Be Doing: Set up test equipment and test articles safely and efficiently. Troubleshoot, repair, and calibrate test equipment to ensure accuracy and reliability. Collaborate with engineering teams to align test capabilities with evolving program needs. Assist in designing, building, and documenting new test equipment and procedures. Support prototype system builds to meet design specifications and deadlines. Diagnose and resolve issues with batteries, fuel cells, and related systems. What We're Looking For: 2+ years of hands-on experience in electro-mechanical roles (e.g., build/repair, debugging, and system setup). Technical training via apprenticeship, trade school, or college program. Proficiency with computers and standard software such as MS Office; familiarity with data collection and analysis tools. What Sets You Apart: Experience handling high-voltage/high-current equipment safely. Ability to read and interpret technical documentation, including electrical and mechanical schematics. A knack for building and troubleshooting complex systems-mechanical, electrical, or both. Where and When You'll Work: This is an in-person role located at our Rochester, New York office-ideal for those who thrive in a hands-on, team-oriented environment. What Your Total Compensation & Benefits Package will look like: Wage - $27.52 - $35.29 per hour. Compensation depends on the selected candidate's education and experience. Relocation: This role may be eligible for relocation assistance. World Class Benefits: Competitive Salary Performance Bonus Generous Paid Time Off and 13 Paid Holidays Affordable Medical plans and no-cost Dental & Vision options 100% 401(k) match up to 6% Company-Paid Life Insurance, Short-Term Disability, and Long-Term Disability Tuition Assistance Program Employee Assistance Program (EAP) with access to mental health care, legal support, and financial guidance Recognition and Kaizen (continuous improvement) Reward Programs Meaningful opportunities for personal and professional development Best in class work culture! Big Name | Big Opportunities | Life is Better at Toyota Toyota Material Handling North America (TMHNA), the industry leader in forklift sales, comprises two main brands: Toyota Material Handling and The Raymond Corporation. We believe investing in the best people, products, and processes will fuel our future success, and we will always be driven by our foundational principles of “respect for people” and “continuous improvement”. With opportunities across North America, we are confident you will find the right position within TMHNA that can help you build a long, fulfilling career. Learn more here: https://www.toyotaforklift.com/careers Follow us on Social Media: Working at Toyota Material Handling | Glassdoor

RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world's most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking an Utility Systems Intern/COOP who enjoys the challenge of learning operation of Steam and Power generation while ensuring a safe and compliant work environment. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with an interest in industrial and utility systems - able to work collaboratively with mentors and employees to achieve success. Essential Duties and Responsibilities: The successful candidate will get firsthand experience about how we produce steam to drive turbines and generate electricity. The operation team is responsible for the safe, efficient operation of the boiler steam generation, turbine-generators, demineralized water, compressed air systems, along with all the auxiliary equipment associated with these systems. RED is also currently involved in the design, specification, and refurbishment of a used, GE Frame 6 Gas Turbine Generator Unit, and Heat Recovery Steam Generator to increase EBP's generation capacity. Perform routine boiler room, refrigeration and water treatment systems equipment inspections and performance including documentation of operational data, checking, and adjustment of controls on equipment as necessary. Qualifications: Currently majoring in Electrical, Mechanical or Industrial Engineering, Power Systems Operations, Thermodynamics, or related field. Eagerness to contribute to our team-oriented environment. Excellent leadership, communication (written and verbal) and interpersonal skills. Valid driver's license. Work Environment: Work will be performed in an industrial setting and expose employees to a variety of weather conditions including hot and cold ambient temperatures. Employee will be required to travel between various buildings and work in plant environment where there are moderate noise levels. Employee would be expected to wear appropriate personal protective equipment for each location and/or task. Physical Demands: While performing duties of job, Employee is occasionally required to bend, lift, walk, or carry equipment. May occasionally lift and or move up to 50 pounds.

***This job req is subject to overtime discounts (0.95x exempt; 1.35x non-exempt) and a 10% discount after six months of service*** List BR only along with prescreen questions only at the top of the resume or it will be rejected. FG Job Posting ID: UIS2JP00002668 Job Class: FE 2 Work Location: 300 Forge Ave Geneva New York USA 14456 Driving/Non-Driving: Non-Driving Duration: Temp to Perm Minimum Experience: 4 years and must be reflected on resume MUST HAVE ON TOP OF EVERY RESUME 1. How many years experience do you have with installing Desktops: Laptops: Printers: Software: 2. How many years experience do you have with Desk Side Support 3. How many years experience do you have with Troubleshooting Repairs of Desktops: Repairs of Laptops: 4. How many years experience do you have with Software 5. How many years experience do you have with Hardware 6. How many years experience do you have with ticketing systems 7. Do you have youre A+ Certification 8. Have you ever worked for IF so when and who were you under 9. Do you have experience with Smart Hands please explain Skills Requested: Troubleshooting SW/HW issues Imaging/software instalation Organizational skills Attention to detail Description: As a Field Engineer 2, your primary responsibility will be installing, diagnosing, servicing maintaining computer-related products which may include but are not limited to desktop and laptop computers, printers, standard software, and networking devices (smart hands). When in support of ITO engagements, you will be recognized as desk side support specialist. You may be directed by Help Desk, Service Desk, or script using standard methods, techniques, and tools. You will handle more complex products, problems, and/or projects and may provide technical guidance to lower-level engineers. You may function as a team or on-site leader as necessary. You will provide technical support to customers in solving technical problems that occur during the installation or operation of company supported products. Responsibilities: May function as team or site leader providing direction to other technicians May support networking products via smart hands May have project management responsibilities for smaller projects Possesses other, high skilled, specialized technical skills Provides support for software and hardware support for desktops, laptops and servers (smart hands) Installs and maintains PCs and associated software and peripherals Performs installs, moves, adds and changes as required Tests and certifies PCs and client approved applications Provides follow-up on problems or escalation Maintains a high degree of professionalism in actions, demeanor and dress Ensures customer satisfaction throughout the service delivery transaction Ensures client specific Service Level Agreements are met and incident and request tickets are updated accordingly within the ticketing system Understands scope of work for client and performs only tasks that are within scope; out of scope tasks would be escalated to CDE, CSM or SDC

Job Title: Project Engineer I Reports To: Engineering Manager Division/Department: GHM/Engineering Level of Work: Level II Entry level position that will learn to run design programs independently, read customer specifications, read terms and conditions, provide support for service and equipment in the field, and will learn to fill out O & D. Will concentrate on one product line with an introduction to other product lines. Key Results Areas by level of work: Level II: Service - Coordinating "production" with problem solving and prevention Resource management (material and people) * Communicates with shop staff, QA/QC inspectors, and engineering staff on a daily basis. * Interacts with customers to deliver first time quality. * Engages leadership team in setting and achieving goals. This includes working with key leadership both functionally and strategically to drive overall improvements inside and outside of engineering. * Plays an active role in product design/development including review of technical details, design for manufacture (cost effective and manufacturing process compliant) and design for test (efficient manufacturing test ensuring product quality). Resource scheduling, output management and reporting * Ensure open communication throughout the organization by keeping management informed of Project status and ensuring coordination of Lean activities. * Create metrics, deployment goals, and objectives to drive accountability throughout the project team. * Organizes, plans, reviews, and provides status of projects managed. * Engage in product requirements definition and reviews. * Participate as reviewer in the design review process. Continuous Improvement * Identify, review and develop product improvements. * Confers with management to establish continuous improvement goals/objectives and overall direction. * Identify areas with other functional leaders, employees, and customers to develop significant lean opportunities for improvement throughout the organization. * Chairs meetings and process improvement teams. Equipment & process maintenance * Development and maintenance of methods for measuring progress to ensure that project goals, objectives, and metrics are being met and maintained. Professional Development (self and reports) * Models operational excellence, visibly demonstrating leadership and technical expertise. Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training * Bachelor's Degree in mechanical engineering or equivalent Experience: * New graduate to 3 years experience Other: * Must be willing to work overtime as required. * International travel may be required. * Domestic travel may be required. * Local travel may be required. * Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Must have proficiency in MS office applications including spreadsheet, enterprise resource planning, database, and specialized application software. * Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. * Strong written and verbal communication skills required. * Strong organization and time management skills. * Ability to successfully plan and implement objectives within established timelines and work schedules. * Ability to analyze problems and develop effective solutions at both strategic and functional levels. * Demonstrate behavior consistent with company values. * Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. * Exhibits polite and professional communication via phone, e-mail and mail. * Maintain strict confidentiality regarding company matters. * Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; completes tasks on time or notifies appropriate person with an alternate plan. * Proficient in engineering application software such as Autodesk Inventor; the ability to learn analytical software such as ANSYS, CFX, etc. * Maintain a collaborative relationship with internal and external stakeholders. * Demonstrates recognition of organization's requirements for the highest quality product with the most efficient utilization of labor and materials: consistently achieves schedule goals; displays initiative, focus, and sense of urgency; demonstrates flexibility in discharging multiple/changing priorities. * Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. * Identifies and addresses potential safety issues including product testing related hazards at customer facilities, which are related to equipment and office area safety. * Ability to apply mathematical operations to such tasks as geometric tolerances and drawing interpretation. * Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. * Ability to define problems, collect data, establish facts, and draw valid conclusions. * Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. * Adheres to safety and regulatory program requirements, policies, and procedures; promptly reports safety/health concerns; utilizes personal protective equipment as required; maintains organized, clean work environment. * Strong reasoning ability required to allow assessment of a broad range of customer requirements. * Ability to successfully plan, self-direct, and implement objectives within established timelines and work schedules. * Proficient in math including algebra and geometry for first level engineering calculations and pricing models required. Additional skills for engineering modeling desired. * Sound engineering judgement required to support customer-consulting tasks. * Customer Relationship Skills to establish technical scope, requirements, and technical corrective actions. * Ability to operate cross functionally within the organization and drive product improvements throughout the process. * Experience reading technical drawings desired with a drive to be detail oriented and willingness to learn specification requirements. * Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. * Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations such as tasks as frequency distribution, determination of test reliability and validity, analysis. * Listens and gets clarification; ability to respond effectively to the most sensitive inquiries or complaints; writes clearly, correctly, and informatively; ability to read, analyze, and interpret the most complex documents; maintains confidentiality. * Proficient in presentation and communication to non-finance functional groups. * Able to manage multiple priorities and deadlines. * Strong analytical, organizational and communication skills are a must. * Ability to solve practical problems in a timely manner whilst dealing with a level of ambiguity. * Must be detail oriented with ability to maintain a strategic outlook. * Proactively identify problems and collaborate with management on implementing possible solutions. * Energetic and eager to tackle new projects and learn new skills. * Ability to keep information confidential. * Maintain current technical knowledge pertaining to position; demonstrates comprehensive, flexible range of skills and abilities; seeks to enhance skills and abilities through cross training and educational development. * High degree of accountability to meet commitments. * Ability to write detailed reports and correspondence. * Have basic knowledge of GD&T principal and working knowledge of a variety of machining processes. * Team skills, working with machinists and project engineers to develop, maintain, and improve processes are very important. * Ability to define problems, collect data, establish facts, and draw valid conclusions. * Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment This job primarily operates in a clerical office setting. This role routinely uses standard office equipment such as computers, phones, photocopiers and filing cabinets. While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization/Security Clearance Must be able to work in the U.S without sponsorship. Ability to obtain US government security clearance is required. This job description is not all inclusive but rather serves as a general guideline of the current needs of the position and can be modified at the discretion of management to meet current business needs. Experience and education requirements are the primary basis for awarding this position, however substitutions that are essentially equivalent may be made as they relate to the essential functions, duties, and responsibilities of this position Salary Description $65,000 - $85,000

The Facilities Engineer is the technical expert to address a multitude of building, land and process engineering requirements as Eastman Business Park continues to grow its development with both Kodak and external Kodak tenants acquiring space or constructing buildings. This responsibility is the primary source for investigation for Kodak site projects, tenant projects, and is the Energy Manager representing Kodak EBP buildings. The role utilizes various tools and software to monitor building utility consumption to assist with determining energy reduction projects and systems upgrade/modernization for the organization. The Facility Engineer collaborates with RED Rochester and equipment providers to coordinate organizational energy and sustainability programs and provide analysis, information, and recommendations to applicable leadership. Responsible for providing technical analysis, review, measurement, and verification projects. Responsibilities: • Acts as project lead for development of energy savings projects, working with NYSERDA and internal organizational representatives. • Leads technical projects involving Kodak or tenant requirements, evaluating needs, scoping project and providing project cost estimates. • Provides technical analysis/review for projects, providing project risk assessment. • Identify and establish working relationships with all necessary engineering, construction, and procurement firms (with focus on energy conservation and generation resources) required to execute energy recommendations. • Perform building “walk-through” and identify energy conservation measures (architectural, mechanical, electrical, etc.) throughout Eastman Business Park buildings. • Effectively develop scopes of work for and manage consulting engineers performing building audits. • Effectively analyze and assess the economic impacts of utility company rate structures and supply side options in a wide variety of customer environments. • Use of simulation software and spreadsheets to accurately represent pre and post retrofit building operation and customizes software and spreadsheets to achieve desired technical results and presentations. • Recommends best methods for measurement and verification of system performance. • Have working knowledge of DDC & PLC logic, PID loop control etc. on systems such as Rosemount; Siemens; DeltaV; Schneider; Alerton; Allen-Bradley etc. • Interface with various existing building automation systems networked between buildings. Modify and repurpose systems as required to optimize operations for energy reduction. Update and/or modify SCADA graphical user interfaces as necessary on various platforms. ie.: Intellution Fix32; GE iFix; DeltaV iFix etc. • Troubleshoot sitewide control issues to determine the root cause of problems. • Calibrate field instrumentation as necessary to maintain accurate site system control. • Conducts interim reviews during project construction to assess guaranteed impact of any changes to the original contract scope of work. • Accurately assess and provide feedback on project engineering risk. • Provide continuous improvement recommendations for optimizing energy usage and equipment upgrade and modernization. • Analyzes data output for trends and/or any deviations that need further investigating. • Assists in the preparation of cost estimates for projects. Qualifications: • Bachelor's Degree in Engineering or related discipline. • 7 Years+ experience in a related field in an industrial/manufacturing environment. • Demonstrated experience and utilities expertise in buildings systems and equipment processes. • Broad knowledge of various skilled trades. Personal attributes: • Excellent customer service skills required, daily interface with both internal Kodak and external tenant needs. • Understands concepts of continuous improvement to drive efficiency in day-to-day work. • A high level of professionalism, integrity, and discretion in interactions with building occupants, contractors and team members. • Experienced with safe work practices/requirements and ensuring compliance. • Excellent verbal and written communication skills for communicating within team and with internal and external tenants. • Strong problem solving and analytical skills. • Strong team player. • Excellent interpersonal skills and able to work cooperatively within a team environment, along with demonstration of flexibility. • Able to organize/prioritize personal workload. • Ability to work in a fast-paced, changing work environment. Physical Requirements: • Regularly lift and or move up to 25lbs/12kg. • Regularly required to stand; walk; sit, bend, and talk or hear. • Heights; may require some work from a step ladder. • Frequently required; use hands to manipulate or feel and reach with arms. • Work may require employee to be exposed to inclement weather conditions. • Some repetitive work: potential use of hand tools to demonstrate actions.

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Seeking a detail-oriented Civil Field Engineer to lead on-site investigations, perform specialized inspections, and oversee material testing. This role involves managing projects from start to finish, conducting precise engineering calculations, and delivering accurate, timely reports that meet industry standards. Responsibilities Conduct specialized inspections and field evaluations, including soils, concrete, masonry, and steel material testing. Perform geotechnical investigations, such as test boring and test pit observations, supported by laboratory analysis and accurate geotechnical calculations. Collaborate with Senior Professional Engineers to execute a wide range of field and technical tasks. Prepare detailed engineering studies and comprehensive reports that meet project and regulatory standards. Coordinate and manage projects related to Special Inspections and Construction Materials Testing, ensuring timely delivery and quality outcomes. Implement rigorous Quality Assurance protocols, maintaining strict adherence to technical standards, codes, and best practices in both field and laboratory settings. Commit to professional growth through continuing education and maintaining current certifications. Qualifications Bachelor's degree in Civil Engineering or a closely related discipline. Engineer-in-Training (E.I.T.) certification required. Proficiency in Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting. Strong interpersonal skills with the ability to build and maintain effective relationships with managers, team members, and clients. Exceptional organizational and time-management abilities to handle multiple priorities efficiently. Knowledge of construction materials, procedures, and documentation is highly desirable. Valid driver's license and ability to travel to project sites as needed. Compensation: $24 - 30/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world's most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking an Utility Systems Intern/COOP who enjoys the challenge of learning operation of Steam and Power generation while ensuring a safe and compliant work environment. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with an interest in industrial and utility systems - able to work collaboratively with mentors and employees to achieve success. Essential Duties and Responsibilities: The successful candidate will get firsthand experience about how we produce steam to drive turbines and generate electricity. The operation team is responsible for the safe, efficient operation of the boiler steam generation, turbine-generators, demineralized water, compressed air systems, along with all the auxiliary equipment associated with these systems. RED is also currently involved in the design, specification, and refurbishment of a used, GE Frame 6 Gas Turbine Generator Unit, and Heat Recovery Steam Generator to increase EBP's generation capacity. Perform routine boiler room, refrigeration and water treatment systems equipment inspections and performance including documentation of operational data, checking, and adjustment of controls on equipment as necessary. Qualifications: Currently majoring in Electrical, Mechanical or Industrial Engineering, Power Systems Operations, Thermodynamics, or related field. Eagerness to contribute to our team-oriented environment. Excellent leadership, communication (written and verbal) and interpersonal skills. Valid driver's license. Work Environment: Work will be performed in an industrial setting and expose employees to a variety of weather conditions including hot and cold ambient temperatures. Employee will be required to travel between various buildings and work in plant environment where there are moderate noise levels. Employee would be expected to wear appropriate personal protective equipment for each location and/or task. Physical Demands: While performing duties of job, Employee is occasionally required to bend, lift, walk, or carry equipment. May occasionally lift and or move up to 50 pounds.

Our Geotechnical department is looking for an Engineering Technician candidate to support our growing team in Rochester, NY. This employee will be an entry level. Salary is $17.50/Hour. Perform visual classification and laboratory testing of soil samples collected during the subsurface investigation. Perform geotechnical field services, which may include subsurface exploration layouts and geophysical surveys. Prepare subsurface exploration logs for use in geotechnical evaluations and reports. Requirements 0 - 3 years of progressive experience in the geotechnical field. Prior experience in a geotechnical laboratory is preferred but not required. Engineer in Training (EIT) is preferred but not required. Driver's license required. Position will require out of town field work based on workload (approximately 20-40%) Position will require ability to lift 50 pounds. Effective verbal and written communication skills. Possess a high capacity for self-motivation. Ability to apply engineering principles to a variety of geotechnical projects. Salary Range: $17.50 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife ultra-filtered milk; Core Power High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. job purpose: The Engineering Technician for filler is a crucial role within the Engineering Department responsible for ownership of the reliability, improvement and operational expertise across filler & packaging equipment in the Webster facility. They will provide technical solutions and expertise to Operations and Maintenance, to build out and improve the processes and routines across filler & packaging equipment. They will manage and oversee overhaul maintenance, design changes, and standard creation while assisting the team responsible for operational reliability, top loss improvements, and capital projects. This individual will plan, direct, and coordinate team activities including all projects with necessary vendors and in-house resources. responsibilities: Acts as a subject matter expert capable of defining operational standards and maintenance practices for filler & packaging equipment. Optimize machine performance and implement corrective, preventive and predictive actions to minimize downtime. Enhance operational efficiency by developing and implementing process improvements, leading reliability routines to eliminate machine issues and create/maintain comprehensive documentation (SOPs, PM guidelines, etc.). Effectively communicates and collaborates with diverse teams (operators, technicians, engineers, vendors) to troubleshoot issues, lead & implement projects, and ensure seamless production flow. Takes ownership of filler & packaging equipment's OEE, lifecycle, tracking parts, managing inventory, executing preventive maintenance, and leading equipment rebuilds/upgrades to maximize performance. Leverages data analysis to monitor equipment performance, identify root causes of failures, and implement data-driven improvements to optimize efficiency and quality. Fosters a culture of continuous improvement, proactively identifying and implementing innovative solutions to enhance processes, reduce waste, and drive overall operational excellence. skills/qualifications required: Preferred minimum of 4 years' experience in Consumer Packaging Goods & packaging equipment. Exhibits a strong mechanical aptitude, proficient in troubleshooting 90%+ of technical issues. Ability to update P&ID's, mechanical/electrical prints. Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community. Ability to train staff, including organizing, prioritizing, and scheduling work assignments. Ability to analyze and assess training and development needs. Skilled in BDA and RCA initiatives with the ability to lead those initiatives. Able to understand and utilize engineering drawings, operating manuals, and blueprints to conduct business. Ability to handle ambiguity and work in a fast paced, entrepreneurial environment. Aseptic/Dairy experience preferred. Knowledge of USDA, State, Federal regulations for a dairy manufacturing facility a plus working conditions and physical requirements: Ability to lift a minimum of 40 lbs. on an occasional basis Ability to stand for extended period Climb ladders and work at elevations of 75 feet. food safety requirements: Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected In the event of absence, another employee with the same skill level will assume the duties and responsibilities as required position location: Webster, NY reports to: Engineering & Reliability Manager travel requirements: 50% to begin than exempt/nonexempt: non-exempt base pay range: $36-$39 fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email ******************** . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.