Engineering associate jobs in Stockton, CA - 558 jobs

All

Engineering Associate

Project Engineer

Engineering Internship

Mechanical Engineer

Engineering Technician

Field Engineer

Engineering Specialist

Research And Development Engineer

Engineering Specialist (Flex Staff)
CDM Smith 4.8
Engineering associate job in Walnut Creek, CA
CDM Smith is seeking Engineers to support Federal Construction Projects with agencies such as USACE, AFCEC, and NAVFAC. This is a pipeline requisition for future projects. The Engineering Specialist applies broad professional knowledge of engineering principles to solve complex technical challenges and ensure compliance with federal construction standards to meet specific client needs. Work is performed independently under limited supervision, requiring initiative, sound engineering judgement, and the ability to communicate effectively with a variety of stakeholders including contractors, government clients, and multidisciplinary project teams. Job Duties: - Serve as the technical liaison between federal government client design branch, construction branch, and contractors. - Review design submittals, shop drawings, specifications, RFIs, and technical reports for compliance with Federal and client specific standards. - Apply engineering principles and relevant codes across planning, investigation, design review, construction administration, , and assessment of engineering procedures, structures, systems, and tools - Monitors progress and prepares technical reports and/or project status reports. - Provide engineering judgment for field modifications, non-conformance issues, value engineering proposals, and constructability reviews. - Complies with guidelines and regulations including permitting, safety protocols, environmental requirements, etc. and delivers technical files and other technical documentation as required. - Assist in the development of cost estimates and supporting analysis in coordination with government cost estimators and contracting officers. - Participate in pre-construction meetings, progress reviews, and project closeout/punchlist activities. - Conduct or assists in quality assurance reviews to ensure compliance with contract requirements. - Develops, trains, mentors junior engineering staff while guiding technical direction and best practices. - Develop and maintain client relationships through responsive communication and strong technical support. Serves as a liaison with clients. - Performs other duties as required. \#LI-LP2 **Job Title:** Engineering Specialist (Flex Staff) **Group:** FSI ENT WFT Field **Employment Type:** Temporary **Minimum Qualifications:** - Bachelor's degree in Engineering. - At least 5 years of relevant experience. Domestic travel is required. Overseas travel is also possible. **Preferred Qualifications:** - PE (Professional Engineer) License or RA (Registered Architect) is highly preferred. - Construction Quality Management (CQM) for Contractors certificate. - OSHA 30-Hour Construction Safety. - Federal or DoD project experience (NAVFAC, USACE, or Air Force CE) is highly desirable. - Experience across vertical construction (buildings/facilities) and horizontal work (utilities, waterfronts, transportation, or airfields) - Proficiency in interpreting design documents, specifications, and Unified Facilities Guide Specifications (UFGS). - Skilled in project scheduling tools and coordination (Microsoft Project, Primavera P6) - Strong knowledge of federal contracting standards (FAR/DFARS) and Federal government design & construction processes across different divisions. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 100% **Assignment Category:** Fulltime-Temporary **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** - Must be a U.S. citizen. - Able to pass a federal background check. - Knowledge of design review, construction administration, cost estimating, scheduling, and contract management. - Demonstrates technical proficiency and design application knowledge. - Strong organizational skills to balance and prioritize work. - Excellent attention to detail and commitment to quality assurance. - Familiar and comfortable working on computers/tablets/phones and digital platofrms, mobile technology, and inspection/reporting software. - Strong writing and oral communication skills to work with military clients, contractors, and government teams. - Ability to work with multiple stakeholders and problem-solving skills for handling design discrepancies or construction conflicts in the field.. - Good interpersonal skills to cultivate relationships with colleagues, customers, and partners. - Ability to work independently in field settings under limited supervision. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $78,624.00 **Pay Range Maximum:** $157,248.00 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Successful candidate will be required to work 100% in the field locations. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Seeking candidates for a potential future opportunity!:** We are looking for qualified candidates for this position in anticipation of future project opportunities. Please note this is an "Evergreen" position which will be used to build our candidate pool but is not a role that is open at this time. If you are interested in being considered for this position should this position become available, we encourage you to apply to be part of our talent community. By having your information on file, we can reach out to you when this or a similar role officially opens. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$78.6k-157.2k yearly 7d ago

Looking for a job?

Let Zippia find it for you.

Field Engineer 2 - San Francisco, CA (South Bay)
GE Healthcare 4.8
Engineering associate job in San Ramon, CA
The Senior Field Service Engineer performs on time and accurate preventative maintenance in one or more modalities of equipment. The Senior Field Service Engineer is aware of and follows all Field Modification Instructions and/or Instrument Service Information bulletins. Works independently to trouble shoot and perform moderately complex repairs on assigned equipment. Independently performs and leads equipment installations in one or more modalities. Responsible for driving customer satisfaction through Service Excellence. GE HealthCare is a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world. **Job Description** **This role would be supporting the San Francisco Bay Area (South Bay) supporting first shift, hours would be 8 AM PT to 5 PM PT - Monday to Friday. We are looking for candidates with experience working with X-Ray.** **Responsibilities:** + Perform timely and accurate preventative maintenance of medical equipment with a hospital or healthcare system to ensure optimal delivery of healthcare services to patients. + Perform troubleshooting, service repairs and installations of moderate complexity. + Lead communications with customers and serve as escalation point for customer related concerns, including installations. + Own customer issues from dispatch or identification of issue to resolution. + Proactively engage with other team members to ensure appropriate solution for the customer. + Leads installations, validations, maintenance, and service repair needs on designated equipment. + Leverage customer knowledge and relationships to assist customers and service sales with contract and on demand revenue growth. + Maintain relationships with customers and ensure timely communication, resolution and proper follow up to drive customer satisfaction. + Adhere to company policies, procedures and hospital protocols to ensure regulatory and compliance requirements are met; ensuring documentation of all work performed is captured daily, including debriefing including metrics and ordering parts. + Partner with the customer and/or the sales team to recommend value-added services that will help the customer run their business more efficiently. + Utilize the GEHC escalation process, as needed, and work closely with region and national support to define and implement corrective action plans to resolve customer issues. **Qualifications/Technical** **Requirements:** + Educational and Technical Requirements: Associate degree in related field or equivalent military education and 4 years of experience servicing electronic equipment or high school diploma/GED and 6 years of relevant experience + Must have and maintain a valid Driver's License. + Experience with Web applications as well as Microsoft suite of products. + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. + Ability to be available after hours and/or work a rotating on-call schedule including weekends. + Demonstrated ability to manage multiple, competing priorities while maintaining customer satisfaction. **Special Physical Requirements:** + Candidate must be able to lift, carry, push, and pull up to 35 lbs. unassisted and frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit and stand for long periods of time. Candidate must also be able to reach at, above and below shoulder level, flex/extend neck and have good hand and finger dexterity. Specific vision abilities required by this job may include color, close vision, distance vision, peripheral vision and depth perception. + Must have and maintain a valid Driver's License. + Willingness to be available ""after hours"", or work a rotating On-Call schedule, including weekends, for critical issues and coverage, as necessary. **Quality-Specific Goals:** + Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position. + Meet Health and Human Services, Environment Health and Safety and/or all other applicable regulatory requirements. + Complete all planned Quality, EHS & Compliance. We expect all employees to live and breathe our behaviors: to act with humility and build trust; lead with transparency; deliver with focus, and drive ownership -always with unyielding integrity. Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you'd expect from an organization with global strength and scale, and you'll be surrounded by career opportunities in a culture that fosters care, collaboration, and support. The range listed in the paragraph below is a national range which may be different by site. This position will be located in San Ramon, CA. For this specific location, the pay range is $115,200 - $172,800. For U.S. based positions only, the pay range for this position is $93,600.00-$140,400.00 Annual. It is not typical for an individual to be hired at or near the top of the pay range and compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate may be influenced by a variety of factors including skills, qualifications, experience and location. In addition, this position may also be eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). GE HealthCare offers a competitive benefits package, including not but limited to medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, life, disability, and accident insurance, and tuition reimbursement. GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. **Relocation Assistance Provided:** Yes
$115.2k-172.8k yearly 7d ago
Mechanical Engineer
KGS Group
Engineering associate job in Sacramento, CA
KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations. Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors. Conduct site investigations, condition assessments, and provide design and construction support. Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems. Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Preparation and review of reports. Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met. Edit and prepare design specifications. Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset. Minimum of 7-15 years of experience in mechanical engineering. Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire. Previous consulting experience is preferred, but not required. Excellent verbal and written communication skills are required. Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously. Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. *Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*
$110k-160k yearly 4d ago
Engineering Associate
The Mice Groups, Inc. 4.1
Engineering associate job in Fremont, CA
Engineering Associate / W2-only Contract / 6-months / Onsite, Fremont, CA / $22.75/hr. W2 Responsibilities: Assist in overseeing and maintaining the production processes within the Metrology Department. Manage incoming and outgoing jobs for both internal and external metrology service requests. Coordinate with shipping/receiving teams and couriers. Act as a liaison between the Metrology department and other internal departments. Provide feedback on systems and work towards continuous improvement. Required Skills: Excellent professional written and verbal communication skills. Experience and proficiency with Microsoft Word and Excel. Adaptive, quick learner, and flexible. Ability to be extremely detail oriented, patient, organized, accountable, and work well in a team environment. Ability to lift ~25 lbs. Fluent English. Preferred Skills: 3+ years of customer service or sales experience. Experience creating SOPs or similar guiding documents for professional use. Experience in a Quality Control role. Experience coordinating with shipping/logistics services. Experience either leading or being part of the roll out of new professional initiatives.
$22.8 hourly 1d ago
Engineering Technician
Insight Global
Engineering associate job in Fremont, CA
Job Title: Engineering Technician Duration: 3-6 month contract (with potential to extend and/or convert depending on performance) Schedule: Monday-Friday, 8:00 PM-4:30 AM + recurring weekend shifts Compensation: $55+/hr A local robotics startup client of Insight Global is seeking several dedicated Engineering technicians to work on-site at their San Francisco, CA location. Job Responsibilities: • Build and maintain our robot fleet involving complex mechanical assemblies and actuators, small gauge cable assemblies, and fine pitch SMT PCBs. • Bring up and troubleshoot robots using Linux and proprietary software tools. • Use CNC machines, 3d printers, and other machine tools to fabricate and rework components. • Track, maintain, and socialize robot fleet health using tools such as Jira. • Create work instructions and assembly processes to streamline assembly and bring-up workflows. • Use CAD tools to develop assembly fixtures and understand design intent. • Propose system and process improvements, and prepare reports, documentation, and presentations to summarize findings and recommendations. • Collaborate with cross-functional teams to resolve technical issues and improve processes. • Order, organize, and maintain inventory of materials, supplies, and tools. Required Experience: • 5 years of proven technical skills and hands-on experience with robots or related fields. • Experience building cable assemblies involving small gauge crimps and coaxial connectors. • Experience reworking PCBs including fine pitch SMT. • Experience fabricating parts including using CNC machines and 3d printers. • Proficiency in using CAD software and other engineering tools. • Strong analytical and problem-solving abilities. • Excellent communication and teamwork skills. • Attention to detail and accuracy in documentation and reporting. • Ability to work independently and manage multiple tasks. Apply today!
$55 hourly 4d ago
Project Engineer
Flint 4.7
Engineering associate job in Sacramento, CA
Job Responsibilities: The Project Engineer at FLINT supports the Project Manager and Project Superintendent to facilitate a well-managed project. The Project Engineer assists with the overall management and administration of projects including pre-construction services, estimating, subcontractor management, RFIs, submittal process, CORs, and SCOs. Responsibilities include: Drafting and reviewing subcontracts and purchase orders Thoroughly reviewing project documents and familiarizing with project participants Representing the company in project meetings Determining submittal requirements and maintaining the submittal log Assisting in developing and maintaining project schedules Conducting regular site visits to ensure proper construction and adherence to schedule Administering As-Built drawings Handling project correspondence and documentation Obtaining necessary permits and ensuring timely receipt of record documents Assisting in administering the Punch List Performing additional duties as assigned Job Requirements, Qualifications, Characteristics: FLINT is seeking an experienced Project Engineer with 1+ years of experience to perform project management functions on small projects ( Good grasp of construction terminology and activities Understanding of all trades including MEP and building permit process Ability to estimate CORs, assist in bidding, and assemble project estimates Familiarity with cost control and management processes Basic understanding of prime contract types and delivery methods Proficiency in project documentation, scheduling, safety practices, and technology tools (Fieldview, Viewpoint, Team VPT1, Bluebeam, Pype, GCPay, P6, and Vista) Skills in business development and maintaining customer relations Understanding of fee enhancement, risk mitigation, and client management Ability to mentor team members and promote teamwork and cooperation
$78k-106k yearly est. 4d ago
Project Engineer - Truckee
Level 10 Construction 4.1
Engineering associate job in Sacramento, CA
The Truckee area Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Project Engineer will be reporting to the Project Manager and/or Superintendent. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs. Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 3 years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.
$80k-111k yearly est. 1d ago
Research And Development Engineer
All Weather Insulated Panels 3.8
Engineering associate job in Vacaville, CA
The Research and Development (R&D) Engineer uses their technical design skills to drive the products from theoretical structural designs and calculations to the physical testing, approvals and certifications. As part of the AWIP Innovation Team, the R&D Engineer collaborates with the technical, design, and business development teams to take new product developments and improvement of existing products from the stages of concept, evaluation, design, validation, approval, product launch, and installation. This position will be critical in ensuring that AWIP remains ahead in the industry for innovative and sustainable building products. Essential Functions: Work with the innovation and cross-functional teams to envision, design, manufacture, prototype, and launch innovative products Research and develop new products while optimizing cost and performance Participate and provide deliverables for the product development phase/stage gate system Maintain detailed and organized notes and information for each project including, but not limited to, vendors, material types, successes and failures, modifications, etc. Ensure test materials and assemblies are properly installed and prepared at test laboratories by assisting in assembly preparation, witnessing and supervising testing. Design building test rigs and apparatuses as required for internal testing Ensure all products meet performance, application and reliability standards through rigorous laboratory and field testing Collaborates with the Innovation team members and respective departments to ensure proper testing, certifications, and approvals are attained Perform market research to determine types of products required in market Investigate new/existing products and compare to rival products in construction market Be a professional resource with detailed knowledge about products in terms of R&D, market competition, cost, manufacturing deployment, application. Comply with all safety and company policies and procedures. Perform other related duties as assigned. Minimum Qualifications: Bachelor's Degree in Mechanical Engineering, Structural Engineering, or Civil Engineering with structural design emphasis Minimum of three years of experience in product development/design engineering E.I.T. with ability to obtain P.E. license preferred Working knowledge of Tekla, Solidworks, Revit, AutoCAD or other 3D modeling software Experience with structures, building materials and construction industry Proactive attitude to learn new products and technologies and build relationships with vendors Self-starter with proven record of innovation, problem solving, and delivering technical solutions in a timely manner. Excellent time management skills with ability to manage multiple projects at once and be able to prioritize by importance, schedule and necessity. Technical knowledge to understand and effectively communicate building science methodologies, design, technical information building codes and standards in an understandable manner. Must be able to effectively use a computer and have intermediate proficiency MS Excel, MS Word, and email and basic proficiency in the rest of MS Office. Position is an in-office position with travel to meet with vendors and clients, test laboratories, job site visits, etc. Frequent travel by automobile, airplane, and other modes of public transportation are required. Maintain a valid driver's license and passport Essential Requirements: Ability to work 8 hours per day with ability to work overtime as need to complete time sensitive tasks. Ability to work in a non-climate controlled environment with extreme temperatures and outdoor exposure at times. Ability to read and interpret drawings, specifications, submittals, technical and contract documents. Ability to safely lift up to 50 lbs. Excellent organizational skills and attention to detail. Must be able to use tools, equipment, machinery, etc. Must have visual acuity, discernment of color and texture, and finger dexterity. Ability to read, write, type, and verbally communicate effectively in English. Ability to sit, walk, and stand for extended periods. Must be able to bend, lift, twist, reach, grasp, and other physical movements. Must be reliable, dependable and highly motivate with a desire to be successful. AWIP is a drug free workplace.
$96k-132k yearly est. 3d ago
Project Engineer
Cybercoders 4.3
Engineering associate job in Sacramento, CA
The Project Engineer will oversee engineering projects from conception to completion, ensuring that they are completed on time, within budget, and to the required quality standards. This role involves collaboration with various stakeholders, management of resources, and the implementation of engineering design principles to achieve project objectives. Key Responsibilities Manage engineering projects, ensuring adherence to timelines and budgets. Develop and review engineering designs and technical documentation. Utilize CAD software to create and modify engineering plans and drawings. Collaborate with project teams and stakeholders to facilitate effective communication and project execution. Conduct risk management assessments and implement mitigation strategies. Monitor construction processes and ensure compliance with quality assurance standards. Prepare project schedules and track progress against milestones. Facilitate problem-solving sessions to address project challenges and obstacles. Provide regular updates to stakeholders on project status and developments. Assist in budgeting and resource allocation for engineering projects. Qualifications Bachelor's degree in Engineering or related field. Proven experience as a Project Engineer or similar role. Strong knowledge of engineering design principles and practices. Proficiency in CAD software and technical documentation. Experience in budgeting and scheduling for engineering projects. Excellent collaboration and stakeholder communication skills. Strong problem-solving abilities and risk management experience. Knowledge of construction management practices and quality assurance processes. Benefits OUR TRAINING PROGRAMS Cost estimating utilizing the latest software from Accubid Lighting design, photometry, and Title 24 compliance Power distribution and system architecture Basic procurement Field installation techniques Pre-fabrication design and implementation Our Benefits Medical, dental, and vision care Profit sharing/Company matching 401k Program Paid vacation/sick leave Fully paid life insurance policy Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: keith.ellis@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : KE2-1852792L519 -- in the email subject line for your application to be considered.*** Keith Ellis - Director of Recruiting For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance. This job was first posted by CyberCoders on 05/13/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.
$77k-110k yearly est. 3d ago
Project Engineer
Maxim Crane Works, LP 3.5
Engineering associate job in Sacramento, CA
Purpose: The Project Engineer (PE) works with our team of other Engineers, Sales, and field staff to support Maxim's fleet of rental equipment. The PE will assess project lifting requirements and develop accurate technical drawings and supporting documentation for equipment installations and lift plans. The PE's responsibilities include the gathering information needed to produce detailed drawings and specifications, calculate crane and rigging requirements, as well as evaluate the feasibility and details for effective tower crane and hoist installations. Key Duties and Responsibilities: Reviews project drawings and plans to verify designs, perform calculations, and use modeling methods to ensure correct results. Develops crane layout and rigging details for crane lifts in private, commercial, and industrial settings. Liaises with Architects, Engineers, contractors, and Maxim team members to gather product information and to establish the job requirements for the project. Creates and presents structural overviews for upcoming projects and develops reports that include technical details for engineers as well as big-picture analysis. Uses AutoCAD and other drafting software programs to create 2D design documents and 3D models for individual components and overall structural plans according to client needs and project requirements for deliverables. Prepares documentation for customers covering project plans and progress, and other relevant information. Prepares ground bearing pressure calculations for track mounted and outrigger-based cranes. Perform other related duties as assigned or required. Minimum Requirements: Education: Bachelor of Science Degree in Civil or Mechanical Engineering, Naval Architecture, or other related engineering degree. EIT Certificate is preferred. Experience: 0 to 4 years of previous relevant engineering experience. Skills/Knowledge: Moderate level knowledge of applied geometry and statics. Advanced level organizational and problem-solving skills. Advanced level presentation and documentation preparation skills. Moderate level ACAD skills - 3D ACAD skills are preferred. Basic to moderate level knowledge of AISC Steel Construction Code and connection design. Basic to moderate level knowledge of structural analysis techniques. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, use hands to finger; handle or feel; and kneel; crouch; or crawl; and talk; or hear; push and/or pull; reach; climb; bend and/or stoop. Specific vision abilities required by this job include close vision, color vision, peripheral vision and depth perception. Limited travel is expected to visit project sites and observe or supervise equipment installations. Maxim is an equal opportunity employer and does not discriminate against employees or applicants for employment based on their race, color, religion, creed, sex, national origin or ancestry, age, sexual orientation, disability, genetic information or veteran status, as those terms are defined under applicable laws, or any other characteristic protected by law.
$78k-105k yearly est. 3d ago
Project Engineer
Myers & Sons Construction 4.4
Engineering associate job in Modesto, CA
We are looking for a Structures Project Engineer interested in heavy civil construction with 2 to 5 years' experience to join the team on our Tim Bell Road Bridge Replacement Project in Stanislaus County. Myers and Sons has been contracted for a structural project to remove and reconstruct the existing Tim Bell Road Bridge over Dry Creek. The project consists of replacing the existing historical bridge with a combination of a flat slab bridge and parabolic box girder. Work includes large diameter CIDH pile, falsework, trestle and bridge post tensioning. The project is expected to be completed over the course of two seasons. We are looking for a person that can develop a deep understanding of the project documents, including the contract with the owner, subcontracts, cost reports, CPM schedules, specifications, project deliverable documents, correspondence, billings, and related project controls items. This person should feel comfortable navigating and working within accounting and project documentation software such as Vista and be detailed oriented. In addition to office tasks, this person will work closely with the project superintendent to develop and execute work plans and perform construction layout using AutoCAD and Lecia surveying equipment. Key Responsibilities: Work On Site to help solve problems that occur during construction Working within Vista to manage documents Maintain thorough understanding of the contract with the Owner Monitor and report project progress Field work: construction layout, developing grades, and work plans for self-performed work Review and approve project invoices Document control such as submittals, RFI's and Change Orders Qualifications: Bachelor's Degree in Business, Construction Management or Engineering preferred 2 - 5 Years of Experience in highway civil or structures construction projects in California. Experienced dealing with subcontracts, subcontractors and self-perform work Excellent organizational, team management, problem solving, motivational skills. Apply Here: ******************************************************************************* Benefits: Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. Flexible Spending Account (FSA)/Dependent Care FSA 401K with 8% Match Life insurance Employee Assistance Plan (EAP) Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D Paid time off Professional development assistance Work in a collaborative environment that fosters creativity, support and mutual respect. Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status
$76k-104k yearly est. 5d ago
Project Engineer
Armer/Norman & Associates
Engineering associate job in San Leandro, CA
Project Engineer - Motivated/Hungry/Driven - Commercial Construction Company: Armer/Norman & Associates - A growing General Contractor specializing in commercial projects Job Type: Full-Time Salary Range: $70,000 - $115,000 DOE (plus benefits, bonus potential, and professional development opportunities) About Us Armer/Norman is a dynamic general contractor based in the Bay Area, delivering high-quality commercial construction projects on time and within budget. We're expanding our team and seeking a motivated Project Engineer to support our project management efforts in a fast-paced environment. We're considered a growing but small/medium size GC operating in niche industries. Your employment will have a direct impact on the project and company's success and growth - you will not be lost in the numbers as you would with a bigger GC. Your growth rate and potential within the company will be a direct function of your productivity, not your tenure. We want motivated, hungry, and driven applicants only. Job Summary We are looking for a Project Engineer with 2-5 years of hands-on experience working for a general contractor. The ideal candidate will assist Project Managers and Superintendents in coordinating all aspects of commercial construction projects, from submittals and RFIs to closeout. Proficiency in Procore is essential, as it's our primary project management software. Key Responsibilities Assist in managing project documentation, including submittals, RFIs, change orders, and closeout packages using Procore. Coordinate with subcontractors, architects, engineers, and owners to ensure smooth project execution. Track project schedules, budgets, and progress; prepare reports and updates. Support quality control, safety compliance, and on-site coordination. Review plans, specifications, and contracts for accuracy and compliance. Handle procurement, material tracking, and logistics. Participate in project meetings and contribute to problem-solving. Qualifications Bachelor's degree in Construction Management, Civil Engineering, or a related field. 2-5 years of experience as a Project Engineer or similar role with a general contractor (commercial projects preferred). Proven hands-on experience with Procore software (e.g., managing drawings, submittals, RFIs, daily logs, and financials). Strong understanding of construction processes, building codes, and safety standards. Proficiency in Microsoft Office Suite; experience with Bluebeam, MS Project, or similar tools is a plus. Excellent communication, organizational, and problem-solving skills. Ability to thrive in a team environment and manage multiple priorities. What We Offer Competitive salary based on experience. Comprehensive benefits package (health, dental, vision, 401(k) with match). Opportunities for professional growth and Procore certification support. Paid time off, holidays, and performance bonuses. A supportive team culture in the vibrant Bay Area construction market. Control your future and fast-track your career in construction with us by applying today!
$70k-115k yearly 3d ago
Divisional Projects Engineer - CAPEX
Pacific International Executive Search
Engineering associate job in Fremont, CA
About the job Pacific International is partnered with a rapidly growing industrial manufacturing organization undergoing significant investment in automation and large-scale capital projects. The company is seeking a hands-on Divisional Projects Engineer to lead major engineering initiatives across multiple sites. This individual will own full project lifecycles from concept and design through installation, commissioning, and start-up. The ideal candidate is a detail-oriented engineer who enjoys being on the shop floor, collaborating with cross-functional teams, and driving operational improvements across a fast-paced manufacturing environment. Responsibilities Be a consistent on-site project presence, supporting installation, commissioning, and troubleshooting while coordinating with site teams, vendors, and engineering partners. Own end-to-end project execution, including scoping, design reviews, scheduling, budgeting, and milestone management. Travel across divisional facilities to oversee projects, conduct site assessments, and manage vendor FATs, verification testing, and equipment sign-offs. Lead process improvement and efficiency initiatives across automated manufacturing lines to enhance productivity and throughput. Develop and refine engineering designs, project plans, and documentation aligned with divisional standards. Evaluate new technologies and machinery to improve capability, reliability, and long-term performance. Partner with maintenance teams as a technical advisor to resolve recurring equipment issues and support preventive and predictive maintenance strategies. Ensure safety, environmental, and regulatory compliance is built into every phase of project execution. Communicate progress clearly across stakeholders to keep projects on track and aligned with business priorities. Qualifications 4-8+ years of experience in manufacturing, engineering, maintenance, or quality roles. Bachelor's degree in engineering required; master's preferred. Proven ownership of capital or large-scale engineering projects from concept through completion. Strong background working with automated or fast-moving manufacturing environments. Comfortable with up to ~50% domestic travel to manage projects across multiple locations. Skilled in project planning, budgeting, vendor management, and cross-functional coordination. Hands-on, solutions-focused problem solver with strong communication and leadership skills. Experience with ISO-driven environments and engineering documentation practices is beneficial. Analytical, organized, and able to juggle multiple priorities while driving effective outcomes. About Pacific International: Pacific International, a globally recognized retained executive search firm, is dedicated to empowering Fortune 500, FTSE 100, and high-growth enterprises in building exceptional C-suite, senior-level, and strategic leadership teams while championing diversity and inclusion. Our adaptability, agility, and forward-thinking ethos distinguish us in the ever-evolving business landscape. Since 1997, we have been dedicated to building lasting client partnerships based on trust and reliability, and a proven track record of successful C-suite and mid- to senior-level leadership project delivery across many key industries globally. Pacific International Diversity Statement: At Pacific International, diversity, equity, and inclusion are at the core of who we are and what we do. Our commitment to these values is unwavering and we proudly champion diversity on behalf of our clients in every Executive Search mandate we undertake. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. In pursuit of these objectives, we actively encourage applications from individuals of all backgrounds and identities. Questions? Email Olivia McCrossin - ******************************************
$77k-106k yearly est. 4d ago
Project Engineer
Forma Construction 4.5
Engineering associate job in Fremont, CA
Seeking a top-tier Project Engineer for high-end residential construction. Are you looking for a challenge and opportunity to grow? Are you interested in working on architecturally-driven, high-end residential projects throughout Northern California? FORMA Construction, an award-winning firm, seeks a motivated, detail-oriented Project Engineer to help our clients build their dream homes. The Project Engineer role is a critical hub for FORMA. In coordination with the Project Manager and the Superintendent; the PE works closely with clients, architects, designers, subcontractors, and other vendors. The PE tracks progress and updates budgets while keeping the project well-documented and running smoothly ensuring that our clients are informed and consulted every step of the way. Success in this role is measured by your ability to maintain project documents like RFI's and Submittals among other tasks within Procore while maintaining good relations with our clients, vendors, and other stakeholders. At FORMA, our Mission is the continual development of our people and processes to create lasting relationships built on integrity, partnership, and craft. Our core values are based on Urgency, Ownership, Communication and Craft. FORMA's clients and work sites take us throughout the greater Bay Area, building a range of styles and requirements, but all our projects share the same level of dedication, detail, and communication. Our Project Engineer will ensure that our clients receive the best possible service, while continuing to build their experience in project management. Responsibilities: Assist with document control including RFI's, submittals, subcontractor bids and documentation, change orders, schedule updates, drawings, and meeting minutes. Ensure projects and subcontractors are properly set up in Sage and Procore. Coordinate with Superintendent to ensure daily logs, photo documentation, and required postings are correct and up to date. Interface with City and County government in relation to permits, parking, and inspections. Coordinate on site project set up, ensuring basic office supplies, safety equipment, required postings, toilets and utilities are in place for the project. Schedule, set agendas, produce documentation and logs, and take notes for project meetings. Manage and update punch list for project. Assemble close out package for clients at the end of the project, including Maintenance and Service information and schedule. Participate in weekly Maintenance and Service meeting, schedule all maintenance, and distribute service schedule to the service team. Regularly interface with clients, answering questions, keeping them up to date on their projects, and contacting them about needed maintenance and service on their completed projects. Requirements: Construction project management experience preferred Degree in a related field. Valid driver's license and reliable transportation. Ability to speak, read, and write in English. Ability to multitask and handle multiple high priority tasks. Strong written and verbal communication skills. Excellent customer service. Strong computer skills, experience with Microsoft suite, Smartsheet, and Procore. Team-oriented and willing to work with others to achieve results. Ability to work independently. Compensation This is a full-time, exempt role with a salary range of $65-85k annually. FORMA's current benefits package includes: Health, dental, and vision insurance with employer contribution. FSA and commuter benefits accounts. Employer-provided life insurance. 401k with employer matching. Potential annual bonus based on twice yearly employee review cycle. Unlimited PTO policy. Separate paid sick leave of 72 hours per year. FORMA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
$65k-85k yearly 4d ago
Project Engineer
Urata & Sons Concrete, LLC 3.8
Engineering associate job in Rancho Cordova, CA
Project Engineer (Construction - Concrete Subcontractor) Job Type: Full-time Pay Range (Annualized): $60,000 - $90,000 per year. About the Role We are a concrete subcontractor seeking a Project Engineer to support our Project Management team based in our Rancho Cordova office. This role helps keep projects organized, documented, and moving-supporting communication, implementing document controls, evaluating change order requests and submittals of shop drawings, reviewing project schedules, etc. This position is ideal for someone looking to build or continue a career in construction management. What You'll Do Develop a full understanding of the scope and interdependence of all contract documents. Handle and submit Daily job reports, RFI's, and submittals. Manage effective document control mechanisms for the project to ensure that work is performed in accordance with contract documents. Evaluate change order requests including design changes, specifications and drawing releases and reports status. Evaluate submittals of shop drawings, material data and samples and take appropriate action based upon contract specifications. Review the project schedule and assist the project manager in the maintenance of it as requested. Assist the project manager in the maintenance of effective cost control mechanisms for the project. Complete project close out requirements in accordance with contract documents. Administer quality control program as outlined in the project procedures manual. Become familiar with safety requirements of the project and monitors compliance. Utilize safe work practices and follow directives, policies, and procedures for assisting and maintaining a healthy and safe work environment. Execute additional duties and responsibilities as assigned. What We're Looking For Ability to prioritize multiple tasks and adapt to changing requirements and priorities. A self-motivated and proactive team player. An organized and detail oriented individual. An skilled communicator who can interact effectively and professionally with all levels of employees, management, vendors, clients, and others. A dedicated team member who is comfortable with traveling, working on active jobsites, and who can work extended hours when required by project schedules or urgent circumstances. Qualifications 1-3 years construction experience. Ability to use a computer. Proficient with Microsoft 365 (Outlook, Word, Excel, etc.) and Bluebeam (or equivalent). Proficiency with PlanGrid or Procore are a plus. High School Diploma/GED required; Construction Management degree preferred Work Environment & Schedule The position reports on-site to an office located in Rancho Cordova, CA. The position requires travel to active construction jobsites as needed or required. Typical office hours are Monday - Friday, 8:00 - 5:00. The working schedule may vary by project needs. The company has an engaging culture and periodically attends or hosts events, on and off site. Benefits Medical, Dental, Vision, and Life Insurance. Employee Assistance Program. Profit Sharing & 401(K) Program. Discretionary Bonus Program. Paid Sick Leave (5 days per year) Paid Vacation Leave (starts at 2 weeks/year) Paid Holidays (9 days per year) Paid Volunteer Day Paid Bereavement Leave Equal Opportunity We are an Equal Opportunity Employer and consider applicants without regard to race, color, religion, sex, gender identity/expression, sexual orientation, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations are available for qualified individuals with disabilities.
$60k-90k yearly 5d ago
Concrete Division Intern - Engineer
The Sundt Companies 4.8
Engineering associate job in Clay, CA
JobID: 8459 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Sundt is looking for committed engineering (Civil, Structural, and Mechanical) and construction management students within accredited Universities/colleges. The internship will provide you with unique experiences on challenging projects throughout the US while providing you the opportunity to participate in several of the activities it takes to successfully build our projects. We're looking for the future leaders of our company and those who are inspired to go beyond the expected. Come internship with one of the best places to work, as voted on by our own employees and where our people make the difference. Key Responsibilities 1. Assisting with project record keeping, preparing shop drawings, and assisting with cost control records. 2. Assisting with report preparation, safety inspections, submittal logging and processing. 3. Assisting with surveying, testing, sample collection, drawing correction and filing. 4. Assisting with time keeping and cost control, inventory control, schedule checking, subcontractor monitoring. 5. Attending bid openings, conferences, etc.; taking notes, making records, completing forms. 6. Observing and reporting results of meeting and conducting site tours for visitors . 7. Preparing quantity take-offs, calling vendors and sub-contractors for proposals. 8. Working as a manual laborer, helper, clerk or technician assistant, etc. Minimum Job Requirements 1. A team player, ready and willing to take on whatever challenge is offered. 2. Currently enrolled in a four-year Construction Management or Engineering program. 3. Eager to learn, immensely curious, full of questions, and ready to get their hands dirty. 4. Prefer those who have interest in a construction career for a builder. 5. Proficient use of all Microsoft Office Suite programs. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program
$47k-79k yearly est. Auto-Apply 47d ago
Machine Learning Engineer Intern
Neuralink 4.1
Engineering associate job in Fremont, CA
We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world. Team Description: The Brain Computer Interface (BCI) Applications Team is responsible for delivering a product that gives people with paralysis the ability to control computers, phones, gaming consoles, and robotic arms with their minds at the same speed and functionality level as able-bodied people can. Furthermore, the team is focused on restoring speech for mute individuals and enabling direct, natural silent communication with AI agents. In this role, you'll work with neuroscientists, physicians, software engineers, and electrical engineers to develop the next-generation human-ready Brain-Computer Interface (BCI). Job Description and Responsibilities: We are hiring a Machine Learning Engineer Intern to develop novel neural decoders to increase control speed and accuracy, improve reliability, and expand functionality of BCIs. You will play a critical role in developing machine learning solutions and driving the successful execution of projects to achieve mission critical goals. You'll work with cross-functional teams to design new BCI functionalities and novel computer user interfaces. Required Qualifications: Evidence in delivering high-impact projects either in academia or industry Prior experience designing and building Machine Learning models Deep understanding of machine learning concepts and fundamentals Experience in analyzing complex datasets, driving insights, and communicating results in a simple and clear way to both technical and non-technical stakeholders Excellent communication and collaboration skills Strong coding skills, with a focus on clean, efficient, and scalable code development Preferred Qualifications: Experience working with time series or unstructured data Expected Compensation: The anticipated hourly rate for this position is listed below. California Hourly Rate: $35/Hr USD What We Offer: Full-time employees are eligible for the following benefits listed below. An opportunity to change the world and work with some of the smartest and most talented experts from different fields Growth potential; we rapidly advance team members who have an outsized impact Excellent medical, dental, and vision insurance through a PPO plan Paid holidays Commuter benefits Meals provided Equity (RSUs) *Temporary Employees & Interns excluded 401(k) plan *Interns initially excluded until they work 1,000 hours Parental leave *Temporary Employees & Interns excluded Flexible time off *Temporary Employees & Interns excluded
$35 hourly Auto-Apply 31d ago
Engineering Intern
Therm-X of California 4.0
Engineering associate job in Hayward, CA
Job Description Therm-x of California is the leading manufacturer of Advanced Temperature and Control Systems for Hi-Technology industries. We have been in business for over 30 years and have a diverse customer base. We offer competitive pay, medical, dental, vision, 401(K), sick leave and paid time off. We are looking for an Industrial/Process Engineering Intern to support our Warehouse department to reorganize over 80,000+ unique parts to maximize efficiency and support the low-volume high-mix production schedule. The Warehouse Engineer Intern will be cross trained to perform various tasks in Purchasing, Receiving, and Kitting and Inventory. Essential duties include but no limited to; Support Warehouse layout management Preform data analysis & support the reorganization of inventory according to data Identify opportunities to improve kitting efficiency Physically reorganize inventory Perform cycle count Support documentation of warehouse organization Support de-trashing of stored material and material handling Usage reports on lower level parts Material handling and space efficient packaging methods Understanding of proper material handling practices Supply chain coordination on packaging and sample sizing Prepare Inventory analysis and Shortage analysis Support the design layout for finished good warehouse Support the improvement of floor stock Program Conduct production capacity analysis to ensure operational efficiency Conduct wall to wall inventory checks / inventory audits Other projects based on management discussion, data analysis, and identified opportunities Support the improvement of kitting process efficiency by analyzing workflows and identifying areas for enhancement Report daily activities to responsible supervisor Ensure all work processes meet safety standards and address any safety concerns Desired Skills; Strong written and verbal communication skills to translate technical recommendations for non-technical stakeholders. Ability to create effective solutions for a wide range of challenges Strong analytical skills to interpret data, create reports, and provide insights to decision-makers. Familiarity with lean manufacturing principles and supply chain management. Project management skills to handle multiple initiatives simultaneously. Proficient in using presentation software to communicate complex information to management. Physical Demands: While performing the duties of this job, the employee is regularly required to be in a stationary position; move within the facilities, constantly operate machining equipment and tools, inspect surroundings and equipment, occasionally ascends/descends a ladder, communicate with others, detect odors, and transport equipment up to 30 pounds Work Environment: High noise level associated with a manufacturing facility
$49k-69k yearly est. 10d ago
Summer 2026 Intern - Engineering (Private Sector)
Brown and Caldwell 4.7
Engineering associate job in Walnut Creek, CA
Embrace Your Possibilities: At Brown and Caldwell, an environmental engineering firm, we're unlocking the potential of water and healthy environments to create thriving communities. Delivering this shared purpose starts with our people: We recruit individuals seeking to develop their skills and gain experience to build a strong foundation for the future. Through an internship at Brown and Caldwell, you'll gain real-life, hands-on experience alongside our employee owners, engineers, scientists, consultants, and constructors who are driving positive changes for our clients and communities. Here you'll find opportunities for impact, community that lifts, support to thrive, and trust in you as you embark on your career journey. So, what's possible for you? Brown and Caldwell offers Summer Internship opportunities to spend a summer working with our team to support the Private Sector Business Unit. We are seeking an individual interested in gaining practical, hands-on experience outside of the classroom. We promise a collaborative environment where you will grow as a professional under the guidance of your people manager and team and be trusted to support project objectives. Our work is interesting, challenging, wide-ranging in nature, and impactful for the communities we live in. We invite you to embrace your possibilities and join us to learn and develop with our team of nationally recognized experts! How Will You Make an Impact? Interns at Brown and Caldwell make a daily, material impact by completing support duties to advance their team's projects and objectives. They receive professional training and the support of their team. Interns can expect to be onboarded, mentored, and developed by industry leaders to develop real-life skills and make an impact on their assigned projects. As a Summer Intern, you can expect your experience to include the following: * Collaborate closely with project managers, engineers, designers, and BIM leads to execute work on water and wastewater treatment and conveyance infrastructure projects. * Assist in the preparation of engineering and design deliverables including drawings, specifications, technical memoranda, reports, schedules, and figures. * Communicate effectively and coordinate with multidisciplinary project teams (e.g., drafters, designers, engineers). * Perform edits and updates in Revit and AutoCAD models based on engineering changes and markups. * Participate in the full project lifecycle, including design, documentation, and construction support. * Conduct field work such as site investigations and construction observations as needed. * Support data-related tasks including entry, analysis, visualization, and documentation to inform design decisions. * Check design deliverables for consistency, readability, and adherence to standards and specifications. * Provide engineering services during construction, including performance checks and conformity assessments. * Manage and deliver assignments on time, demonstrating strong organizational and time management skills. * Complete an Internship Capstone project demonstrating skill development, learning, and accomplishments gained during the summer internship experience. Work schedule and location: Summer Interns with Brown and Caldwell work a full-time schedule of 40 hours a week and may have the potential for hybrid work schedules and fieldwork Desired Skills and Experience: What Must Our Candidate Have? (Required) * To qualify for an internship, you must be enrolled as a student seeking a degree in engineering (Structural Engineering, Mechanical Engineering, Environmental Engineering, Electrical Engineering, or a related field), science, geology, or a related field. * You must be enrolled for the 2025-2026 academic year and plan to continue in Fall 2026. * You also must maintain a minimum cumulative GPA of 3.0 on a 4.0 scale. Salary Range: The hourly pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A: Hourly $18.40 - $25.20 Location B: Hourly $20.20 - $27.70 Location C: Hourly $22.00 - $30.20 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, California, Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act #Intern26
$18.4-25.2 hourly 60d+ ago
Intern, Engineering
SPX Technologies 4.2
Engineering associate job in Fremont, CA
Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Detection and Measurement, TCI is a global leader in innovative spectrum monitoring and communications intelligence (COMINT) systems. With solutions to ensure the efficient use of frequencies, long distance communications, monitoring and security communications intelligence applications, we improve communications and protect military forces and infrastructure around the world. How you will make an Impact (Job Summary) SPX is a diverse team of unique individuals who all make an impact. As an “Intern - Engineering” you will have the ability to learn about all areas of the SPX Communication Technologies business while supporting the Engineering department. We are looking for an enthusiastic, self-motivated intern who will get the opportunity to gain experience in several disciplines while working in a successful Engineering environment that designs and builds world leading custom RF and electronic systems. The intern position will be aimed at building real world experience at a pace that suits the intern. Time will be spent around the company, seeing areas of the business that interface with Engineering to help gain a greater appreciation. Time will also be spent on Engineering based projects that will be selected based on the intern's experience, knowledge and interest areas. The position is at our TCI International Inc. facility in Fremont, California. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: Developing test applications Conducting Module and System level testing Performing regression testing What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience Currently enrolled in an Electrical Engineering program, entering their junior or senior year of undergraduate degree Commitment to work onsite for three (3) months Preferred Knowledge, Skills, and Abilities C++ programming Python programming Linux scripting TCP/IP networking GUI development Linux Operating environment exposure Database related classwork Embedded development related classwork Spectral Processing related DSP classwork Must have experience with Microsoft Word, Excel, PowerPoint, Outlook Education & Certifications Pursuing undergraduate degree in Electrical Engineering with a graduation between June 2025 and December 2026. Travel & Working Environment No Travel will be required for this role. The role will be based at the TCI International facility in Fremont, California. The Intern - Engineer will be expected to work at the office. Salary Range We recognize that attracting the best talent is key to our strategy and success as a company. As a result, we aim for flexibility in structuring competitive compensation offers to ensure we are able to attract the best candidates. As required by law in this state, the quoted salary range for this position is $24.00-$25.00 per hour and represents our good faith estimate as to what our ideal candidates are likely to expect. We tailor our offers within the range based on organizational needs, internal equity, market data, geographic zone, and the selected candidate's experience, education, industry knowledge, location, technical and communication skills, and other factors that may prove relevant during the selection process. At SPX, it is not common for individuals to be hired at the higher end of the range, and compensation decisions depend on a variety of factors. This position is eligible to participate in a discretionary bonus, subject to the rules governing the plan. SPX offers a variety of benefits, including health benefits, 401K retirement with a company match, and flexible time off. More information about our benefits can be found on the “Rewards and Benefits” section of our career page. How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.
$24-25 hourly 29d ago

Learn more about engineering associate jobs

How much does an engineering associate earn in Stockton, CA?

The average engineering associate in Stockton, CA earns between $58,000 and $135,000 annually. This compares to the national average engineering associate range of $49,000 to $101,000.

Average engineering associate salary in Stockton, CA

$88,000

$58,00010%

$88,000Median

$135,00090%

Job type you want

Full Time

Part Time

Internship

Temporary

Engineering associate jobs in Stockton, CA - 558 jobs

Engineering Specialist (Flex Staff)

Field Engineer 2 - San Francisco, CA (South Bay)

Mechanical Engineer