Engineering internship jobs in Bethesda, MD

ReqID: WAS00007H **See it differently** You see the world through a unique lens and that's exactly what we need. We embrace how you see things differently - it's essential for creating a sustainable future. Arup is a global consultancy with advisory and technical expertise across more than 150 disciplines. We guide, plan and design the future of the built environment. Globally, each year we recruit hundreds of interns to help us see things differently and solve the most complex challenges facing our clients, climate and communities. **The Opportunity** + Design of Plumbing and Fire Protection systems within the built environment, with an emphasis on sustainable design + Support designing plumbing systems such as domestic water, sanitary/vent, and storm systems + Support designing fire protection systems fire sprinkler and standpipe systems + Collaborate with clients, architects, engineers, and consultants to develop integrated solutions for complex buildings + Undertaking and documenting engineering analysis work, including code research, load calculations, and equipment sizing, in a clear manner + Document system design in Revit MEP + Communicate technical ideas to a broad range of audiences using various formats, including presentations and workshops + Write reports documenting calculation methods and results, design assumptions, and other technical information + The ability to prioritize effectively, balance assigned work and exceptional organization skills required for our changing environment + Influence with design on sustainable outcome for our clients to align with Arup sustainability commitment + Assisting in construction administration activities such as site visits and submittal reviews **Is this role right for you?** **Required** + Pursuing a Bachelor's Degree in mechanical, architectural, civil, or environmental engineering + Coursework in fluid hydraulics/piping/fluid dynamics + Shown interest in the built environment and sustainable development + Ability to collaborate with clients + Good time management habits, ability to multi-task, ability to sustain focus on long tasks + Ability to communicate thoughts and technical ideas in an accessible way + Attitude of taking initiative, enthusiasm, eagerness to learn, teamwork, creativity + Ability to prioritize effectively, balance assigned work and exceptional organization skills required for our changing environment + Strong interpersonal and communication skills needed for team-based working + Presentation skills with colleagues and clients of all levels + Must be eligible to work in the United States without the need for employer sponsored work authorization now or in the future. **Preferred** + EIT/ FE certification + Membership in ASPE, ASSE, ASHRAE, NFPA, or SFPE + Courses in sustainability or USGBC participation + Revit or 3D modeling experience + Internship experience in engineering-related firm or evidence of extracurricular activity in the field + Shown ability to perform in a paid work environment with intermittent supervision + Past history of technical presentations and technical writing + Computer programming languages (e.g., Dynamo, Python, Grasshopper) We're looking for: + Changemakers: A passion for sustainable development and creating a better world is key. + Innovative minds: We're looking for critical thinkers who embrace new ideas and challenge the status quo. + Growth seekers: You have a growth mindset, always eager to learn and explore new ways of working. + Adaptable adventurers: You're ready to take on any challenge that comes your way. **What we offer you** At Arup, we care about each member's success, so we can grow together. Our intern experience offers you: + Purpose-driven work: Join an employee-owned team tackling climate, biodiversity, and social challenges, aligned with the UN's Sustainable Development Goals. + Create remarkable outcomes: We trust you to explore challenges, drive change, and create lasting outcomes for our clients, climate and communities. + Inclusive culture: Your unique perspective matters. We celebrate diversity and foster a supportive, social environment where everyone belongs. + Career growth: Grow your skills through innovative projects, training, and mentoring in a supportive environment. We invest in your future. + Work-life balance: Our hybrid model offers flexibility to balance work with your life. We balance your needs with our clients and communities **Washington DC Hiring Range -** The good faith base salary hiring range for this job if performed in Washington DC is $24.00 to $43.50 per hour. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Washington DC will differ. **Next Steps** We will be reviewing our candidates for this position on a rolling basis. Once you've submitted your application, we'll invite you to showcase your skills through a pre-recorded video interview if you've met the minimum requirements. After reviewing your submission, a member of our team will get in touch with you to discuss the next steps. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. **Different people, shared values** Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at. \#goarup \#LI-DF1 EOE-Protected Veterans/Disability

Our Company Changing the world through digital experiences is what Adobe's all about. We give everyone-from emerging artists to global brands-everything they need to design and deliver exceptional digital experiences! We're passionate about empowering people to create beautiful and powerful images, videos, and apps, and transform how companies interact with customers across every screen. We're on a mission to hire the very best and are committed to creating exceptional employee experiences where everyone is respected and has access to equal opportunity. We realize that new ideas can come from everywhere in the organization, and we know the next big idea could be yours! The Opportunity Adobe Researchers are developing the next generation of advanced technologies and user experiences, inventing a future where Adobe enables new forms of creativity, frees people from routine tasks, and allows enterprises to understand and act quickly on customer and business insights. Our research labs are actively published in leading journals and conferences, work with product teams on high profile features, and explore new product opportunities across various domains. We are especially interested in fostering ongoing collaborations that last beyond the internship and become part of your PhD thesis. Adobe Research focuses on the following research areas: * Content Intelligence * AI & Machine Learning * Computer Graphics (2D&3D) * Data Intelligence * Computer Vision, Imaging & Video * Audio * Systems and Languages * Natural Language Processing * Human Computer Interaction * AR, VR & 360 Photography * Document Intelligence * Intelligent Agents & Assistants What you will do Under the direction of an Adobe Research mentor, you will: * Pursue a research problem to apply to Adobe's products and with the possibility of academic publication * Develop new algorithms, run experiments, and produce demonstration prototypes * Document and present your work, both verbally and in writing What you will need * Current PhD or master's student in computer science, or related field (exceptional undergraduates will also be considered) * Sufficient research skills and background in your chosen subject area * Strong communication skills and teamwork experience * Passion for solving real-world problems with web-scale data using and inventing innovative Machine Learning algorithms. Our compensation reflects the cost of labor across several U.S. geographic markets, and we pay differently based on those defined markets. The U.S. pay range for this position is $45.00 -- $61.00 hourly. Your recruiter can share more about the specific pay rate for your job location during the hiring process. State-Specific Notices: California: Fair Chance Ordinances Adobe will consider qualified applicants with arrest or conviction records for employment in accordance with state and local laws and "fair chance" ordinances. Colorado: Application Window Notice There is no deadline to apply to this job posting because Adobe accepts applications for this role on an ongoing basis. The posting will remain open based on hiring needs and position availability. Massachusetts: Massachusetts Legal Notice It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Adobe is proud to be an Equal Employment Opportunity employer. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Learn more. Adobe aims to make Adobe.com accessible to any and all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, email accommodations@adobe.com or call **************.

Job DescriptionDescription: When you walk into a building do you immediately start analyzing it? Do you wonder about the life safety, fire alarm and automatic suppression systems? Well, so do we. We are looking for some passionate interns to join our team of folks who are curious about building systems. The bulk of our projects are renovations, frequently of only the MEP/FP systems, so it makes for some interesting and challenging projects. The fun of renovation work is dealing with the existing constraints imposed by the structure or building operations. We find ourselves regularly solving problems like how to make the equipment fit into an existing building or figuring out how the contractor will build your design. We are such great problem solvers that 95% of our clients would refer us to others. Clients choose us when they want the job done right the first time. We serve our clients' missions as if they were our own, whether supporting the warfighter or our nation's finest government and educational institutions. With our office located in Nation's Capital Region, our interesting client list, and a focus on renovation, you will get to go into some interesting buildings, sometimes seeing history from the inside out. Check out our projects page for some examples of our work. Curious about building systems? Let's see what we can do together! WHAT SUMMER CONSULTANTS CAN DO FOR YOU Give real world MEP/FP industry experience. Provide hands-on experience with tools such as Revit, AutoCAD, and hydraulic calculation software. Provide you with different projects - we have never had identical projects and we rarely have “typical” projects. Buildings are unique and so are their systems. Help you get your boots dirty learning from experienced engineers in the field. Provide a fun, small, and exciting work environment. WHAT YOU CAN DO FOR SUMMER CONSULTANTS Dive into designing quality projects from day one. Not just drafting them, but surveying existing conditions, analyzing life safety, layout fire alarm and fire suppression systems, and lots more fun stuff. Help us tackle our clients' problems. Requirements: WHAT YOU SHOULD BRING WITH YOU 2 years completed towards a Bachelor's or Master's degree in Fire Protection Engineering. Excellent written and verbal English communication skills. Strong skills in Microsoft Word and Excel. AutoCAD and Revit experience a plus. Ability to conduct day-long field surveys outdoors and indoors in conditioned and unconditioned spaces, including walking up to 10-20k steps in a day, climbing up and down a 6-foot ladder, kneeling, squatting, and bending. Ability to obtain site access at client locations. COMPANY BENEFITS Sick Leave: You will earn one hour of sick leave each 30 hours worked. The company reimburses costs for parking and travel to job sites. EQUAL OPPORTUNITY EMPLOYER We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, pregnancy, age, national origin, disability status, protected veteran status, or any other characteristic protected by federal, state, or local laws.

STRUCTURAL TECHNOLOGIES develops and integrates products, engineering support, repair and maintenance services to provide value-added solutions to owners, engineers and contractors. We provide specialty contracting services through our contracting companies, and state-of-the-art proprietary products and engineering support services through our technologies company. With over 2,500 employees working from locations nationwide and in select international markets, we serve the Commercial, Public, Transportation Industrial, and Power markets to tackle the toughest construction challenges. STRUCTURAL TECHNOLOGIES is the in-house engineering business line of Structural Group. STRUCTURAL TECHNOLOGIES develops and integrates products, engineering support, repair and maintenance services to provide value-added solutions to owners, engineers and contractors. We provide specialty contracting services through our contracting companies, and state-of-the-art proprietary products and engineering support services through our technologies company. With over 2,500 employees working from locations nationwide and in select international markets, we serve the Commercial, Public, Transportation Industrial, and Power markets to tackle the toughest construction challenges. STRUCTURAL TECHNOLOGIES is the in-house engineering business line of Structural Group. If you are seeking a challenging and rewarding construction internship opportunity with a dynamic, diversified and innovative company, a Structural Technologies Project Engineer Internship may be for you! We are currently recruiting for a Construction Project Engineer Intern to be based in our Columbia office, which is located in Columbia, MD. As a Project Engineer Intern, you will apply your knowledge and develop new skills while working on a variety of challenging projects. As a Project Engineer intern you will assist in: Project management support Estimating Budget preparation Job cost management Scheduling Production rate tracking Client relations Safety management Quality control management Engineering and design support Business development Successful candidates will possess: A Bachelors degree or will be working toward a Bachelors degree in Construction Management, Civil Engineering or related field of study Strong verbal and written communication skills Excellent documentation and organizational skills Strong computer skills A positive outlook and a team spirit Structural Technologies is proud of a company culture that promotes 24/7 safety and quality. EOE/M/F/D/V Structural Technologies is proud of a company culture that promotes 24/7 safety and quality. EOE/M/F/D/V

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? We're looking for an Engineering Intern to join our Water team this summer! You'll support project engineers and managers in the planning, design, and construction of water, wastewater, and infrastructure projects for municipal clients. Responsibilities include conducting field investigations, performing engineering studies and cost evaluations, compiling data, assisting with CADD drawings and facility layouts, and supporting design calculations. This is a hands-on opportunity to gain real-world experience and contribute to meaningful community projects. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Data Collection and Analysis: Produce accurate reports for others by collecting data from a variety of standard sources and inputting it into standard formats. Engineering Drawings: Carry out a range of activities under the guidance of more senior colleagues to create engineering drawings for the communication, evaluation, and implementation of engineering solutions. Engineering Solutions Design: Contribute to the development of, and implement feasibility testing of, proposed engineering solutions to provide feedback and data to validate the design. Health, Safety, and Environment: Follow the organization's health, safety, and environment (HSE) policies, procedures, and mandatory instructions to identify and mitigate environmental risks and risks to the well-being of self and others in the workplace; instruct the team in safe working methods; identify instances of risky behaviors within the team and take appropriate action, escalating serious issues as appropriate. Technical Developments Recommendation: Research and suggest technical developments to improve the quality of the website/portal/software and supporting infrastructure to better meet users' needs. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching. Develop and maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. Research: Support others by carrying out a range of research activities. Testing: Develop testing standards and procedures under the direction of professional colleagues. Project Management: Support others by carrying out a range of project management activities. Waste Management: Support waste management efforts, aiding in waste reduction programs, waste segregation, storage, transportation, and disposal. Technical Troubleshooting: Conduct routine tasks in technical troubleshooting, which include basic diagnostic and simple problem-solving tasks related to equipment and experiments. What you will bring to the team: Must be enrolled in a Bachelor's or Master's degree program in either Civil or Environmental Engineering Understanding of Engineering fundamentals AutoCAD skills would be a plus Salary Range: $24.00 - $26.00 based on experience and location. #LI-IP1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Intern / Co-op: Test/Integration Engineer - Hardware/Software Job Summary/Description Acquired Data Solutions is seeking an engineering intern with automated programming experience. Candidates must be familiar with test and measure instruments used in laboratories and manufacturing test environments. Programming experience in LabVIEW and/or Python are highly desirable. Multiple positions are available in the summer and fall semesters. Minimum Qualifications ● Enrollment in, or recent graduate of, accredited degree program in Science, Technology, Engineering, or Math (STEM) Desired Skills and Experience Familiarity with operation and automation/programming of Lab and Manufacturing Test & Measurement equipment such as: Digital Oscilloscope Analog and Digital I/O (input/output) RF Instrumentation (Power Meter, Spectrum Analyzer, Vector Signal Transceiver) Signal generator Programming experience: National Instruments LabVIEW and/or TestStand Python C, C# Familiarity with RF (radio frequency) concepts is desired U.S. Citizenship and ability to access US only data systems Candidates must meet one of the following requirements: Current college student, with a cumulative GPA of 3.00 or above, who is attending a Maryland or higher education institution. Current college student, with a cumulative GPA of 3.00 or above, who is Maryland high school graduate attending a higher education institution outside of Maryland. Graduate (within 12 months) of a Maryland higher education institution. Maryland resident, with a 2 or 4-year degree, who has been honorably discharged from the U.S. Armed Forces, The National Guard or a Reserve component of the Armed Forces within the last 18 months. Questions: 1. Please describe your favorite LabVIEW project that you've been a part of, and your role in it 2. Please discuss any experience you have using National Instruments hardware combined with LabVIEW, LabVIEW Real-Time, and LabVIEW FPGA 3. Do you have experience with object-oriented programming and the actor framework?

Whitman, Requardt & Associates, LLP is seeking a motivated and detail-oriented intern to join our Transportation Engineering team. This internship offers hands-on experience in highway and roadway design projects, providing exposure to real-world engineering challenges and professional development opportunities. Responsibilities: * Assist in the design and analysis of highway and roadway projects under the supervision of licensed engineers. * Support the preparation of construction plans, specifications, and cost estimates. * Perform basic engineering calculations and assist with CAD drafting using MicroStation or AutoCAD. * Conduct field visits and assist with data collection and site assessments. * Collaborate with multidisciplinary teams including traffic, structural, and environmental engineers. * Participate in project meetings and contribute to design discussions. Requirements: * Must be pursuing a bachelor's or master's degree in Civil Engineering from an ABET accredited program. * Strong interest in transportation and highway/roadway engineering. * Proficiency in Microsoft Office (Excel, Word, PowerPoint). * Exposure to engineering software e.g., MicroStation, AutoCAD, or Civil #D is a plus. * Strong written and verbal communication skills. * Ability to work effectively both independently and as part of a team. Required Submissions: * Resume * A copy of current, or most recent, school transcript (If you are applying via a 3rd party site that does not allow attachments, please email transcript to ****************** WRA is an equal opportunity/affirmative action employer and complies with all applicable anti-discrimination laws. Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) * Not accepting resumes from 3rd party recruiters for this position * Position #: 2674 #LI - Onsite #LI - Internship

Department Transportation Employment Type Internship Location Tysons, VA Workplace type Onsite Reporting To Grady Vaughan Your Primary Responsibilities will include What you'll need DRMP Offers About DRMP Transforming communities and strengthening connectivity across the Southeast since 1977, DRMP is an award-winning multidiscipline firm that delivers infrastructure solutions to meet the needs of our public, private, and industrial clients. We're 700+ employees strong and growing, with 23 strategically located offices. With expertise in six core markets - alternative delivery, construction services, federal, surveying and mapping/geospatial, and transportation - we're ranked among Engineering News-Record's “Top 500 Design Firms” and have earned both local and national recognition for project excellence. That growth and recognition wouldn't be possible without the people behind it. At DRMP, employees are supported, challenged, and valued through professional development, career advancement opportunities, and work that contributes to the communities we serve. When you join DRMP, you're not just building a career - you are making a difference and helping shape what's next.

ATPCO is the world's primary source for air fare content, holding over 200 million fares across 160 countries. Every day, the travel industry relies on ATPCO's technology and data solutions to help millions of travelers reach their destinations efficiently. Join us and contribute to the development of innovative applications that power global travel. ATPCO is everywhere people buy flights. We're not just shaping the future of air travel- we're redefining how and where great work happens. At ATPCO, we believe in flexibility, trust, and a culture where your wellbeing comes first Our Culture: We've built a remote-first culture rooted in trust, transparency, and belonging. With open-door leadership, weekly 1:1s, and real-time recognition, we keep our people connected and valued-no matter where they work. Our cultural pillars of Collaboration, Empowerment, Innovation, Learning, Transparency, and Trust guide how we show up for one another and grow together. Job Description As a Platform Engineering Intern at ATPCO, you will support the Identity and Access Management (IAM) and platform engineering teams in enhancing enterprise security, automating workflows, and delivering robust user management solutions across our cloud infrastructure. You'll gain hands-on experience with customer identity platforms like Microsoft Entra ID (formerly Azure AD), AWS IAM, and automation tools while working alongside experienced engineers and cybersecurity professionals. You will: Contribute to the development and automation of IAM solutions using Python, Java, and Go. Support integration of Azure B2C for secure external identity management across enterprise APIs and applications. Build scripts and tools to automate identity provisioning, RBAC (Role-Based Access Control), and policy enforcement. Participate in troubleshooting authentication/authorization issues across multi-cloud platforms (AWS, Azure). Assist with IAM governance tasks, including MFA policy design, conditional access, and privileged identity controls. Collaborate with cross-functional teams to improve documentation, streamline onboarding processes, and monitor IAM systems. Create dashboards and logs for identity audit, system performance, and security event tracking. The Ideal Candidate: Currently pursuing a Bachelor's / Master's degree in Computer Science, Information Technology, or a related field. Strong foundation in IAM principles and secure identity workflows. Hands-on experience with Microsoft Entra ID, Azure B2C, or AWS IAM. Familiar with Python, Java, and/or Go for scripting and automation. Enthusiastic, self-motivated, and a quick learner with an interest in cloud security and platform engineering. Preferred Qualifications: Familiarity with tools such as GitHub, Terraform, or scripting in PowerShell. Previous project work or internships involving IAM or cybersecurity incident response. Additional Information At ATPCO, we are deeply committed to diversity, equity, and inclusion. Our supportive policies promote work-life balance through flexible work arrangements, and we cultivate a workplace where every employee feels valued, respected, and a true sense of belonging. We consider qualified applicants for employment without regard to race, gender, age, color, religion, national origin, citizenship status, marital status, disability, sexual orientation, protected military/veteran status, gender identity or expression, genetic information, marital status, medical condition, or any other legally protected factor All your information will be kept confidential according to EEO guidelines.

Thorlabs is recruiting for Summer 2026 interns, which will have the opportunity to learn more about our business, work on real world projects, and interact within a global company. We are planning to have several interns, this position is for an engineering-based internship with our Imaging Systems group located in Sterling, VA. Housing and relocation expenses are at the responsibility of the applicant and will not be covered by the company. This position requires full-time availability from mid-May to August and offers an opportunity to gain valuable skills and industry insights over the summer. Application deadline: December 19th or until positions filled Salary range $18.00 - $25.00 per hour depending upon the degree and level Purpose of the Position This opportunity is to join a rapidly growing, well-known company in an exciting industry. The ideal candidate will be an entrepreneurial, self-motivated individual who thrives in a fast-paced, creative environment. This position is for an entry to mid-level individual who has a mechanical and/or optical design background. Interested individuals will have a technical background and hands-on experience in such fields as fiber optics, mechanical design, laser optics, polarization and telecommunications. Other positions may include an entry to mid-level position for software development and/or software testing. This individual will have the technical background and hands on experience in such fields as Bio-Engineering, Computer Science or Electrical Engineering. Essential Job Functions include the following, but are not limited to: * Work under the direction of a mentor to learn job skills and manage projects * Complete projects in such areas as Research & Development, Product Development, Software Development and Process Improvement * Create presentations summarizing work completed and present to a panel of technical staff * Learn technical skills and software programs in the field of Photonics * Hands on experience with Manufacturing or Software Development processes * Must maintain a safe and clean working environment through compliance with procedures, policies, and regulations. In addition to the essential functions and duties listed above, all positions are also responsible for: * Meeting company standards pertaining to quantity and quality of work performed on an ongoing basis, performing all work-related tasks in a manner that is in compliance with all Company policies and procedures. * Adhering to Company policies, procedures, and directives regarding standards of workplace behavior in completing job duties and assignments. Requirements: * Course work in Mechanical Engineering, Electrical Engineering, Industrial Engineering, Robotics, BioEngineering, Computer Engineering, Software Programming (C++, C#, Python, MatLab), Engineering, Optical Science, Physics, Material Sciences, Chemistry etc. * Technical knowledge in Solidworks, Powerpoint, Excel, Python and Software Development Environment. * Hands-on lab experience (chemistry and/or optical preferred) * Hands-on lab experience (Microscopes and other Lab equipment preferred) Physical Activities: Work may be active, could stand or sit for long durations and/or perform repetitious work at times. The employee may lift or move objects up to 20 pounds. Employees must grasp, manipulate, or assemble parts and components that are often very small. The noise level in the work environment is usually moderate, however, may be noisy at times. Must be able to wear appropriate clothing and personal protective equipment such as but not limited to masks, glasses, gloves, and specialty garments. The required PPE and training allow for the safe handling and processing of chemicals like adhesives, lubricants and solvents, and safe operation of job-related equipment and tools. Thorlabs values its diverse environment and is proud to be an Equal Employment Opportunity/Affirmative Action Employer. All qualified individuals will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age or veteran status. Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law. Internship positions will not be eligible for benefits.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: * The Process Engineering Intern will working for 12-14 weeks to help implement process improvements, including, but not limited to, automation and robotics integration. Duties include design, layout, and improvement of assigned processes, monitoring overall process performance and developing solutions to a broad range of technical issues. The Process Engineering Intern will collaborate across the organization on efforts involving design for manufacturability and cost savings. Duties and Responsibilities: * Work collaboratively in a team to implement manufacturing process improvements and automation * Collaborate with program mentors and champions to identify best methods for automating processes * Utilizes a structured engineering approach to deploy best practices for process control and to improve yields * Initiates and/or updates documentation of processes into work instructions, training guides and/or certification tests * Provide regular (weekly) updates to program coordinator and corporate leads * Compares existing manufacturing practices with external benchmarks and industry best practices and proposes appropriate improvements. Maintains knowledge on current industry standards * Leads capital project efforts to resolve production capacity and technology capability issues * Present multiple project updates to the local leadership team and participate in a corporate wide trade show to executives and cross-functional leaders * Participates in internal design reviews to ensure compatibility of processing techniques to meet customer needs * Limited travel required for workshops and trade shows Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Requires ability to read and interpret engineering drawings and specifications * Project management and structured problem solving with the ability to make data-based and ethical decisions * Eagerness to learn quickly * Capability for designing and analyzing experiments utilizing statistical tools * Excellent communication and interpersonal skills including strong verbal, writing and presentation skills * Ability to lead and participate effectively in cross-functional teams Education and Experience: * Current college junior earning Bachelor's degree in engineering * Experience in applying engineering concepts to solve problems. * Previous internship experience desired Compensation: Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Plumbing Engineering Intern At Salas O'Brien we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary: While working under the supervision of Senior Engineers, the Plumbing Engineering Intern will provide engineering design, evaluation, planning and construction administration for healthcare, science and technology, education and commercial projects. In this role, you will: Develop the engineering system of a given project based on scope of work and/or client's RFP Conduct existing building surveys and documentation of existing engineering systems Prepare load calculations Develop reports/studies You will be a great fit if: You are pursuing a Bachelor's or Master's degree in Mechanical or Architectural Engineering You are proficient in Revit and MS Office Have good communication and time management skills Have an excellent work ethic and attitude Location: Bethesda, MD Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

Bloomberg Industry Group delivers essential intelligence and workflow tools across law, tax, and government through data, analytics, and expert insights and journalism. The Core AI Team drives the next generation of generative AI capabilities that power these products. As an intern, you will work on building generative AI systems or the underlying platforms that enhance our information products or automate workflows. Responsibilities: Generative AI is a rapidly evolving field and the priorities a gen AI team change over time. We expect internships to cover some of the following responsibilities, but new priorities may emerge * Build generative AI applications for Bloomberg Law, Tax, and Government products, and the News and Content teams across those products. * Develop or enhance AI agent workflows, including multi-step reasoning and task orchestration. * Work with MCP systems to extend agent capabilities and control context. * Prototype reinforcement learning for gen AI systems to optimize prompts, context and tool calls. * Collaborate with news, content, and product teams to evaluate, refine, and integrate models into production environments. * Document and present technical findings and prototype outcomes. Qualifications: * Pursuing a degree in Computer Science, Machine Learning, Sciences, Math's, or related field. * Proficiency in Python * Experience with large language models, agentic systems, or reinforcement learning concepts. * Be open to full-time work in 2027 How to stand out An exceptional candidate may differentiate themselves with some of the following. These are not requirements and you should feel comfortable applying if you do not meet all of these: * Motivation and curiosity: Strong interest in understanding problems, questioning assumptions and then designing solutions. * Proactive ownership: when assigned a task, be eager to understand the end goal and to step outside of areas of formal responsibility to meet that goal * Built something: In school or hobby, have built something from scratch or overhauled a non-functional part of a system. * Bayesian statistics: Have formal background or work experience in A/B testing and Bayesian statistics * Relevant work experience: Exposure to professional Application Design or Data Engineering. Finally, we highlight that excellence has no single mold, particularly in a field as rapidly evolving as AI. We're looking for excellent candidates of all backgrounds with strong business intuition and coding skills, and welcome applicants regardless of ethnic/national origin, gender, race, religious beliefs, disability, sexual orientation or age. Equal Opportunity Bloomberg Industry Group maintains a continuing policy of non-discrimination in employment. It is Bloomberg Industry Group's policy to provide equal opportunity and access for all persons, and the Company is committed to attracting, retaining, developing, and promoting the most qualified individuals without regard to age, ancestry, color, gender identity or expression, genetic predisposition or carrier status, marital status, national or ethnic origin, race, religion or belief, sex, sexual orientation, sexual and other reproductive health decisions, parental or caring status, physical or mental disability, pregnancy or maternity/parental leave, protected veteran status, status as a victim of domestic violence, or any other classification protected by applicable law ("Protected Characteristic"). Bloomberg prohibits treating applicants or employees less favorably in connection with the terms and conditions of employment, in all phases of the employment process, because of one or more Protected Characteristics ("Discrimination").

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? We're looking for a Fire Projection Engineering Intern to join our team this upcoming summer! As an Intern, you will assist our Engineers with specific project assignments and perform general office duties related to Fire Protection Engineering, while at the same time being given the opportunity to apply the knowledge and skills being developed in school to day-to-day engineering scenarios. Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in office, three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: * Data Collection and Analysis: Collate and analyze data using preset tools, methods, and formats. Involves working independently. * Recommendations: Provide information and clarification on existing procedures, processes, and precedents. * Improvement/Innovation: Implement improvements and provide feedback on them. Use change management systems and protocols to provide routine support services. * Audit: Provide analytical support on audits while working within existing procedures. * Knowledge Management System: Use the knowledge management system to access specific information. * Business Requirements Identification: Support collection of business requirements using a variety of methods, such as interviews, document analysis, and workflow analysis, to express requirements clearly and succinctly. * Feasibility Studies: Contribute to and support feasibility studies from a technological and organizational perspective, and document findings. * Contract Management: Carry out a range of contract management tasks. * Product and Solution Development: Support others by carrying out a range of product development and engineering activities, such as analyzing client situations or interpreting data. * Policy Development and Implementation: Provide routine support services to others. * Testing: Use product specifications to design test procedures and standards. * Project Management: Support others by carrying out a range of project management activities. What you will bring to the team: * Actively pursuing a Bachelor's or Master's degree in Fire Protection Engineering or Mechanical Engineering * Understanding of Engineering fundamentals * Ability to learn on the job and apply theory in a practical setting * Flexible and adaptable to changing situations and deadlines #LI-IP1 Salary Range: $25.00-$26.00 based on experience. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Responsibilities What you can expect: Meaningful, fast-paced work with the region's largest heavy civil construction and materials company On-the-job training led by talented, passionate members of the Allan Myers team Exposure to a large heavy civil construction project Buddy assignment Social networking events Classroom training to develop professional skills Each assignment is typically 3-6 months Typical Duties Students will support a crew, project or plant team in the planning, scheduling and execution of a heavy civil construction project. Typical duties are as follows: Coordinating subcontractors Project Schedule Management Project plans exposure Preparing work plans Contract Management Daily reporting Ordering materials Change orders Qualifications High school diploma or equivalency (GED) required Pursuing a Bachelor's degree in one of the following areas: Civil Engineering, Construction Management, Mining & Materials Engineering, Business Management, or another engineering related degree Must be a team player and possess a collaborative attitude Excellent communication skills both verbal and written Strong analytical and communication skills Willingness to learn and adapt to change Overview cursor Our Company Does Work That Matters Allan Myers is the largest heavy civil construction and materials production contractor in the mid-Atlantic. We build infrastructure: the highways and bridges that connect cities and towns, the public water and wastewater systems that provide clean water to your home and keep our streams clean. We take pride in meeting the highest quality standards because it ensures our work will have a long-lasting positive impact on the community. When you get home safe each night, you know that what you did that day matters. At Allan Myers, you are part of a team dedicated to making things better, including your career. We pay well and provide generous benefits. We offer extensive training and promote from within. If you have the drive, we will help you build a career in the thriving construction industry and reach your full potential. Allan Myers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status or other characteristics protected by law.

Job Description The Applications Engineer Intern is responsible running, testing, and evaluating data center simulations for energy and water consumption using BAC heat rejection products. KNOWLEDGE & SKILLS Working towards Bachelor of Science Degree in Engineering Strong mechanical and technical aptitude in order to develop an in-depth knowledge of BAC's extensive product offering Requires excellent written communication and phone skills, flexibility in handling a wide range of tasks, attention to detail, and effective interpersonal and presentation skills Proficient in the use of office software programs including Word, Excel, PowerPoint. Strong team player orientation required to provide customer satisfaction in a dynamic environment, with a customer-focused (internal and external), “can-do”, professional demeanor, and sense of urgency Ability to resolve complex problems accurately and in a timely manner NATURE & SCOPE Reporting to the HGV Global Technical Director, the Applications Engineer provides technical applications support for technical evaluations of data center heat rejection simulations. BAC Hiring Compensation Range $22 - $28. BAC provides additional earnings in the form of overtime as applicable under law.

Do you want to build an impactful career to change the world for the better? Geosyntec has an exciting opportunity for an Intern - Civil/Environmental Engineering in our Columbia, Maryland office. The position offers the opportunity to apply engineering (civil, geotechnical, environmental, and water resources) academic knowledge to real-world situations while also learning the business skills needed for a successful consulting career. The position is full-time (40 hours/week) for approximately 13 to 15 weeks during the summer semester of 2026. Candidates are responsible for coordinating their own transportation to and from the office. Our Columbia office consists of approximately 60 professionals and support staff and is located 30 minutes from Baltimore and 45 minutes from Washington, DC. Columbia was the first planned community in the US, and together with adjacent Ellicott City, is consistently listed in the top 10 of Best Places to Live on the East Coast. If you possess the qualifications, attributes, and desire to experience a new culture, Geosyntec will provide the opportunity. Geosyntec is an innovative, international engineering and consulting firm serving private and public-sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. Our engineers, scientists, technical and project employees serve our clients from offices across the world. Ranked by ENR as one of the top environmental engineering design firms, Geosyntec is internationally known for its technical leadership, broad experience, and exceptional client service. We invest in our people. Each employee is unique, and your career at Geosyntec will be too. We offer competitive pay and benefits, and well-being programs to support you and your family. To Learn More Visit: ********************************** Essential Duties and Responsibilities Assist with engineering calculations using computer-based technical tools; Technical writing of reports, letters, memoranda, plans, specifications, and proposals; Data input and analysis, including preparing maps, tables, and figures; Follow instructions and interact with engineers, geologists, office administrative staff, CADD operators (draftsmen), contractors and construction personnel; Potential for fieldwork such as soil and groundwater sampling, stormwater inspections, and drilling and contractor oversight. Drive personal, company, and rental vehicles to client or company project or office sites, and other business locations, as needed. Education and Licensure Currently registered in a Bachelor's or Master's university degree program in a relevant engineering discipline. (required) Degree focus area in civil, geotechnical, environmental, or water resources engineering. (preferred) Skills, Experience and Qualifications Experience with ArcView, CADD, and/or Microsoft Office. (preferred) Outstanding academic credentials and exceptional interpersonal, technical writing, oral and written communication, and problem-solving skills. (required) Valid U.S. driver's license, reliable transportation, and satisfactory driving record for business travel to project sites. (required) Preferred candidates have the ability to return to the position for up to two additional semester rotations during their undergraduate or graduate studies. Candidates must currently hold and maintain valid U.S. work authorization. New H-1B visa lottery and employment based green card sponsorship are not available for this position. This opportunity will be posted for at least five days. Below are the potential compensation ranges that we in good faith believe are applicable for this role at the time of this posting and are only applicable for jobs to be performed in the specified location(s) below. The typical base salary range for this position is just one component of Geosyntec's total compensation package for employees. Actual compensation will be determined based on education, experience, skill set and location. Minimum: $21.17/hourly / Maximum: $29.64/hourly (Columbia, MD) We offer a comprehensive benefits package including, paid holidays, vacation, sick, and personal paid time off, medical, dental, vision, life, and disability insurance, 401(k), and other benefits to eligible employees. #LI-MM1 #LI-Onsite

Job Description Engineering Intern - Summer 2026 Trans-Tech is the leading designer and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors to applications across several industries, including 5G Wireless Communications, Aerospace, Military & Defense, Medical, Battery Technology, SOFCs and other Advanced Technologies. We are seeking a summer intern Engineering Student to join our Process Engineering and/or R&D team to support on-going development and manufacture of Advanced Technical Ceramic products. Job Responsibilities: Assists Manufacturing, Process Engineering, and/or R&D Departments by performing various Engineering related tasks, such as collecting and compiling process data, measurement analysis and monitoring of core Ceramic Material processes in support of the development, manufacture, fabrication, and evaluation of ferrimagnetic, and dielectric based ceramic materials technical ceramic powders and products. Under the guidance and supervision of various Staff Engineers, the Engineering Intern will interact with Engineering and Manufacturing personnel to conduct reviews of material requirements and compatibility of processing methods. The Engineering Intern will compile and evaluate test data to determine appropriate limits and variables for a specific process or material specifications. The Engineering Intern will be encouraged to conceive, plan and carry out experiments and associated activities requiring Engineering concepts to define and select methods that may involve the development of new or improved processes for solid oxide powder formulation & synthesis, powder & slurry processing, forming and pressing, ceramic sintering and post firing evaluation of ceramic material properties and associated electrical characteristics. Depending on the specific assignment, the Engineering Intern must be able to work in a Manufacturing area or a Laboratory environment, attend and participate in Engineering or Project meetings and be prepared to present data or discuss results as necessary and provide formal status updates to assigned Supervisors or Engineering Mentors. Job Requirements: Currently enrolled in a BA/BS/MS program studying Ceramics Engineering, Materials Science, Materials Engineering, Mechanical Engineering, Chemical Engineering, Industrial/Manufacturing Engineering, or RF/Electrical Engineering Completed coursework or experience with Analytical /DOE Software such as JMP or Mini-Tab Completed coursework and/or exposure to Solidworks or Materials Analysis Interest in working in a Ceramic Manufacturing environment and the desire to understand the basics of Ceramic Material processing Self-starter with ability to effectively work independently or as a member of a team Potential interaction with local universities including travel to campuses to perform advanced analytical testing and measurement correlations Proficient in the use of MS Office software suite (Excel, Outlook, PowerPoint, Word) Demonstrate good communication, organizational and documentation skills This position does not include compensation for relocation expenses or housing allowances. Preference will be given to students completing their junior year. Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.

Trans-Tech is the leading designer and manufacturer of RF and microwave components that help our world communicate, discover, create, protect, explore and more. We supply advanced materials, ferrites and magnetic materials, dielectric, ceramic bandpass filters, coaxial resonators, and coaxial inductors to applications across several industries, including 5G Wireless Communications, Aerospace, Military & Defense, Medical, Battery Technology, SOFCs and other Advanced Technologies. We are seeking a summer intern Engineering Student to join our Process Engineering and/or R&D team to support on-going development and manufacture of Advanced Technical Ceramic products. Job Responsibilities: Assists Manufacturing, Process Engineering, and/or R&D Departments by performing various Engineering related tasks, such as collecting and compiling process data, measurement analysis and monitoring of core Ceramic Material processes in support of the development, manufacture, fabrication, and evaluation of ferrimagnetic, and dielectric based ceramic materials technical ceramic powders and products. Under the guidance and supervision of various Staff Engineers, the Engineering Intern will interact with Engineering and Manufacturing personnel to conduct reviews of material requirements and compatibility of processing methods. The Engineering Intern will compile and evaluate test data to determine appropriate limits and variables for a specific process or material specifications. The Engineering Intern will be encouraged to conceive, plan and carry out experiments and associated activities requiring Engineering concepts to define and select methods that may involve the development of new or improved processes for solid oxide powder formulation & synthesis, powder & slurry processing, forming and pressing, ceramic sintering and post firing evaluation of ceramic material properties and associated electrical characteristics. Depending on the specific assignment, the Engineering Intern must be able to work in a Manufacturing area or a Laboratory environment, attend and participate in Engineering or Project meetings and be prepared to present data or discuss results as necessary and provide formal status updates to assigned Supervisors or Engineering Mentors. Job Requirements: Currently enrolled in a BA/BS/MS program studying Ceramics Engineering, Materials Science, Materials Engineering, Mechanical Engineering, Chemical Engineering, Industrial/Manufacturing Engineering, or RF/Electrical Engineering Completed coursework or experience with Analytical /DOE Software such as JMP or Mini-Tab Completed coursework and/or exposure to Solidworks or Materials Analysis Interest in working in a Ceramic Manufacturing environment and the desire to understand the basics of Ceramic Material processing Self-starter with ability to effectively work independently or as a member of a team Potential interaction with local universities including travel to campuses to perform advanced analytical testing and measurement correlations Proficient in the use of MS Office software suite (Excel, Outlook, PowerPoint, Word) Demonstrate good communication, organizational and documentation skills This position does not include compensation for relocation expenses or housing allowances. Preference will be given to students completing their junior year. Trans-Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity or expression, national origin, disability status, protected veteran status, genetic information, or any other characteristic protected by law.