Engineering internship jobs in Clarkstown, NY

Please note: State agencies that contact job applicants do not usually request personal or financial information via text message or over the phone in connection with your response to a job posting. If you are contacted for such information by these methods, or any other method, please verify the identity of the individual before transmitting such information to that person. Note: For questions about the job posting, please contact the agency that posted this position by using the contact information provided on the "Contact" tab for the position. Review Vacancy Date Posted 11/21/25 Applications Due12/22/25 Vacancy ID203350 * Basics * Schedule * Location * Job Specifics * How to Apply NY HELPYes AgencyAdirondack Park Agency TitleAssistant Engineer (Environmental)/Engineer Trainee - NY HELPS Occupational CategoryI.T. Engineering, Sciences Salary GradeNS Bargaining UnitPS&T - Professional, Scientific, and Technical (PEF) Salary RangeFrom $66951 to $94121 Annually Employment Type Full-Time Appointment Type Permanent Jurisdictional Class Competitive Class Travel Percentage 20% Workweek Mon-Fri Hours Per Week 37.5 Workday From 8:30 AM To 4:30 PM Flextime allowed? No Mandatory overtime? No Compressed workweek allowed? No Telecommuting allowed? Yes County Essex Street Address 1133 NY Route 86 City Ray Brook StateNY Zip Code12977 Duties Description Under the direction of and supervision of a licensed, Professional Engineer 1/2, the incumbent will perform a variety of duties, including, but not limited to, the following: * Provide technical review and comment for on-site wastewater treatment systems; * Evaluate stormwater management and erosion and sediment control plans; * Evaluate permit applications for single family dwellings, subdivisions, mines and other activities; * Evaluate and develop corrective actions for enforcement cases; * Assess shoreline stabilization proposals and make recommendations; * Review jurisdictional inquiries; and * Assist with engineering aspects of State Land reviews and Local Government activities. The incumbent will be required to attend field visits to evaluate Agency transactions and coordinate review with project sponsors, contractors, consultants, and federal, state and local authorities as necessary. Essential Functions: * Strong verbal and written communication skills and ability to present information and results. * Able to travel to meetings, site-visits, and outside conferences, as required. Minimum Qualifications This title is part of the New York Hiring for Emergency Limited Placement Statewide Program (NY HELPS). For the duration of the NY HELPS Program, this title may be filled via a non-competitive appointment, which means no examination is required but all candidates must meet the minimum qualifications for the title for which they apply. At this time, agencies may recruit and hire employees by making temporary appointments. At a future date (within one year of permanent appointment), it is expected employees hired under NY HELPS will have their non-competitive employment status converted to competitive status, without having to compete in an examination. Employees will then be afforded with all the same rights and privileges of competitive class employees of New York State. While serving permanently in a NY HELPS title, employees may take part in any promotion examination for which they are qualified. To be considered for appointment through NY HELPS, or 55b/c, candidates must meet the open-competitive minimum qualifications for this position. ENGINEER TRAINEE (ENV) NY HELPS Minimum Qualifications: Either: 1.) a bachelor's degree or higher in engineering or engineering technology as listed below; OR 2.) proof of passing the NCEES Fundamentals of Engineering Examination (FE) AND one year of full-time engineering experience as listed below. Note: If you are only eligible to apply under Option 1, you may apply if you expect to meet the educational requirements within six months of the filing date of your examination application. You may be considered for employment, but cannot be appointed, until you submit proof to the hiring agency that you completed the educational requirements. Failure to meet the educational requirements within six months of submitting your examination application may result in removal of your name from the eligible list. Qualifying degrees: Aeronautical Engineering, Aeronautical Engineering Technology, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Forest Engineering, Geological Engineering, Geotechnical Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Paper Engineering, Petroleum Engineering, Plastics Engineering, Sanitary Engineering, Soil and Water Resources Engineering, Water Resources Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time experience in sanitary, public health or environmental engineering. ASSISTANT ENGINEER (ENV) NY HELPS Minimum Qualifications: Either: 1.) Proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) AND a qualifying bachelor's degree or higher as listed below; OR 1.) proof of passing the National Council of Examiners for Engineering and Surveying (NCEES) Fundamentals of Engineering Examination (FE) AND one year of full-time qualifying engineering experience as listed below. Qualifying degrees: Aeronautical Engineering, Aeronautical Engineering Technology, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Forest Engineering, Geological Engineering, Geotechnical Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Paper Engineering, Petroleum Engineering, Plastics Engineering, Sanitary Engineering, Soil and Water Resources Engineering, Water Resources Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time experience in sanitary, public health or environmental engineering. Additional Comments Must have a valid driver's license or demonstrate the ability to meet the transportation needs of the position. Travel may be required. Telecommuting up to 5 out of 10 days per pay period may be available and will be discussed at the interview. The starting salary for this position is $66,951.00 Assistant Engineer (Trainee) or $74,193 for Assistant Engineer. The State of NY offers a work-life balance and generous benefits package, including: * Holiday & Paid Time Off * Public Service Loan Forgiveness (PSLF) * Pension from New York State Employees' Retirement System * Affordable Health Care Options * Family dental and vision benefits at no additional costs * NYS Deferred Compensation Plan * Additional items discussed at interview For new State employees appointed to graded positions, the annual salary is the hiring rate (beginning of the Salary Range) of the position. Promotion salaries are calculated by the NYS Office of the State Comptroller in accordance with NYS Civil Service Law, OSC Payroll rules and regulations and negotiated union contracts. APA is an Equal Opportunity Employer. Some positions may require additional credentials or a background check to verify your identity. Name Elaine Caldwell Telephone ************ Fax ************ Email Address ************************* Address Street 1133 NY Route 86 PO Box 99 City Ray Brook State NY Zip Code 12977 Notes on ApplyingIf you feel you meet the minimum qualifications and Agency operating needs and are interested in being considered for this vacancy, please submit a resume, copy of your qualifying transcript(s) and a cover letter demonstrating how you meet the stated minimum qualifications. Please submit your application materials to *************************. Please include Vacancy #203350 on your resume and also in the subject line of the email. It is the responsibility of each applicant to accurately describe their experience and demonstrate that they meet the minimum qualifications.

WHAT YOU DO AT AMD CHANGES EVERYTHING At AMD, our mission is to build great products that accelerate next-generation computing experiences-from AI and data centers, to PCs, gaming and embedded systems. Grounded in a culture of innovation and collaboration, we believe real progress comes from bold ideas, human ingenuity and a shared passion to create something extraordinary. When you join AMD, you'll discover the real differentiator is our culture. We push the limits of innovation to solve the world's most important challenges-striving for execution excellence, while being direct, humble, collaborative, and inclusive of diverse perspectives. Join us as we shape the future of AI and beyond. Together, we advance your career. THE ROLE: AMD's Data Center Platform Engineering Group {DPEG} is designing, building and delivering innovative technology infrastructure enabling the digital world. We create cloud-enabling server solutions that help the world's leading companies turn their ideas into reality. Our customers are future-focused and so are we, always a step ahead of the next challenge. As experts in engineering, manufacturing, and supply chain, we're the bridge between problem and solution for the world's leading cloud and telecom providers. Our customers depend on us to solve their most complex server design needs. Come and join our Data Center Platform Engineering Group where we are building amazing, powered products with amazing people. This is an exciting role in which you will have great exposure to the latest technologies in the industry. In this role, you will be working as a member of the system development team. The position will handle multiple projects simultaneously, maintain project schedules/deadlines. Assist engineering projects by assembling, testing, refining prototypes, and evaluating new electronic components. You will be working closely with multiple engineering organizations. THE PERSON: If you are passionate about finding and resolving issues and thrive in fast-paced, technically challenging environments where you work on various problems, and exposure to the latest technology this could be the perfect opportunity. This position requires a theoretical knowledge of engineering, specifically electronic and electrical engineering, as well being heavily involved with hands-on. The position will utilize tools and technologies including electronic and computer hardware, architecture, and components; soldering tools for circuit boards and electronics; Linux and widows-based diagnostic/test programs to benchmark electronic component performance. KEY RESPONSIBILITIES: * Build, debug, test, repair, and upgrade computer prototypes (computers, servers, peripherals, programs, and software/firmware). * Proficient in hand soldering. * Assist engineers in the evaluation, design, and test of new electronic components. * Document prototype construction and maintain pertinent engineering records. * Write procedures and various technical documents. * Perform Lab Management responsibilities to maintain and organize a clean and efficient lab. * Materials management to inventory/track/ship materials. * Utilize analytical thinking and problem-solving skills to perform the above. PREFERRED QUALIFICATIONS: * Experienced in engineering test, debugging, tech support, or relevant experience. Experience within a computer hardware environment preferred. * Fundamental understanding of computer architecture and components (CPU, power supply, memory, graphics cards, flash memory, etc.) * Strong demonstrated soldering skills. Knowledge of circuit boards, soldering, and electronics * Ability to diagnose the root cause of computer system failure and isolate the components/failure nodes * Ability to use custom Linux and Windows-based diagnostic/test programs to run benchmarks/tests on electronic components' performance * Understanding of hardware and software interactions; able to apply this understanding to resolve issues * Excellent verbal and written communication skills * Strong interpersonal skills and the ability to interact with people at various levels in the organization * Analytical thinking and problem-solving ability; use rigorous logic to solve problems * Understands and uses speed as a competitive advantage; completes tasks on time * Lab Management and Organizing skill for maintaining clean and efficient labs. ACADEMIC CREDENTIALS: Associate's degree (or above) in Electronics, Certificate of Completion of Technical School, or equivalent combination of education and/or experience preferred This role is not eligible for Visa sponsorship. #LI-CB1 Benefits offered are described: AMD benefits at a glance. AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants' needs under the respective laws throughout all stages of the recruitment and selection process.

About Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: We are looking for talented technical interns to join our stellar team in the spring!Program Details: Spring 12-16 week internship program for 40 hours per week or flexible school year internship for 30+ hours per week For school year internships, expected time dedication is flexible and tailored to your academic schedule Mechanical Engineering Intern (onsite): Mechanical Engineering Interns will develop and exercise their design, analysis, and hands-on skills to support prototyping and stellarator design activities Activities may include CAD and/or FEA model development and will culminate in the delivery of functional custom components, tooling, fluid systems, and test equipment This role will require at least 3 days onsite per week Project Assignments Examples: High-temperature superconducting magnet engineering, manufacturing, and testing Cryogenic and vacuum systems Instrumentation and diagnostic systems Electrical and control systems engineering Mechanical engineering Various modeling, simulation, and data analysis roles including but not limited to COMSOL, ANSYS, Python, C++, MATLAB, Simulink, Microsoft Visio, LabVIEW Ideal Skills: Enrolled in a STEM undergraduate or graduate program (mechanical engineering, aerospace engineering, materials science, electrical engineering, etc.) Interest in clean and sustainable energy to combat climate change Hands-on or computational experience through academic research, club projects, hackathons, or industry internships Highly self-motivated, independent, and driven to solve problems Authorized to work in the US Willingness to learn new things! Compensation: $18-25/hr undergraduate and $26-30/hr post-grad It's not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world's hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran's status, or other characteristic protected by applicable laws and regulations.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: We are currently searching for a Water Engineer Intern to support our team in Paramus, NJ. We are looking for dedicated, creative, and energetic candidates interested in tackling challenges and developing sustainable solutions to address water issues. Collaborating with our experienced water professionals, you will support and drive the development of projects, interact, and work with clients, and develop your technical capabilities. Role accountabilities: The Water Engineer Intern will possess a strong foundation in engineering concepts and theories related to climate resilience and stormwater management. You will need to have technical aptitude and be familiar with various software tools such as ArcGIS, AutoCAD, HEC-RAS, HEC-HMS, SWMM, and PowerBI, which are beneficial for project work. You will need to be skilled in evaluating, planning, designing, and supporting the management of projects involving stormwater management, green infrastructure, climate adaptation, and design of nature-based solutions. Additionally, you will need to provide valuable support in project management efforts including managing project scopes, budgets, and client deliverables. In addition, the following will be expected of the Water Engineering Intern: Assess, develop, and support management of sustainability, stormwater management, and resilience projects. Exercise judgment on details of work and in making preliminary selections and adaptations of engineering alternatives Perform fieldwork activities such as site visits and construction inspection. Support collection and analysis of data including statistical analysis, analytics, research and synthesis. Attend outreach activities and external meetings related to climate adaptation and stormwater management projects. Prepare reports, presentations, and other audio-visual materials, and participate in client meetings. Use digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Power BI, and Augmented Reality, as well as designing and managing databases and cloud-based computing services Qualifications & Experience: Required Qualifications: Pursuing a Bachelor's degree in Civil or Environmental Engineering (or a closely related engineering discipline) Preferred Qualifications: Prior work/internship experience at a design or consulting engineering firm or municipal work environment Familiarity/ experience with CAD, AutoCAD, Revit Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for part-time, as needed positions. These benefits include EAP, 401K, and optional well being benefits. The salary range for this position is $25.81 - $38.72 / per hour. #LI-TB1 #EarlyCareersANA #Resilience-ANA #WATER-ANA #LI-HYBRID #SWE #WEPAN #AWIS #INWES #BWEC #NSBE #SHPE #AISES #oSTEM #SAME #SASE

**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Dial , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world. **Dare to learn new skills, advance in your career and make an impact at Henkel.** **What you'll do** + Collaborate with cross-functional teams to support the development and launch of new packaging solutions + Test new packaging components to ensure compliance with performance and regulatory standards + Assist engineers with daily tasks related to packaging development and validation + Write and maintain packaging specifications and documentation + Support packaging-related project activities and timelines + Contribute to continuous improvement initiatives in packaging processes and systems **What makes you a good fit** + An undergraduate student (sophomore, junior, senior) pursuing a degree in Packaging Engineering. + Packaging Knowledge: Foundational understanding of packaging materials, formats, and processes. + Communication & Collaboration: Comfortable working across teams and effectively communicating with stakeholders at all levels. + Adaptability & Learning Agility: Eager to take on new challenges, quickly learn new systems, and apply knowledge to real-world projects. + Technical Skills: Proficient in Microsoft Office Suite (Excel, Word, PowerPoint); exposure to pallet design software such as CAPE or TOPS is a plus. **Some benefits of joining Henkel as an intern** + Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. + Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. + Networking events with Henkel business leaders, experts and sustainability ambassadors. + Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. + In-person and virtual social events to connect with other Henkel interns across the country. **Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. ** **Additional information** + This internship is eligible for a housing stipend or relocation support. + The anticipated start date for this internship is June 15, 2026, and the anticipated end date is December 18, 2026. + Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. + If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. + If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** req75278 **Job Locations:** United States, CT, Darien, CT | United States, CT, Stamford, CT | United States, CT, Trumbull, CT **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

Job Description College Summer Intern Position requiring that the candidate has completed at least one year towards securing a BS Engineering degree at an accredited college. Assist Hardware Engineers in executing technical projects relating to FPGA design, verification, and/or process improvement activities. Duration: May 2026 - August 2026 In this position, you will participate in BAE Systems' nationwide LEAP Internship & Co-op Program, where you will Learn, Engage, Apply, and Progress within the company. The LEAP Program will provide you with the opportunity to work alongside experienced professionals on impactful projects, engage in career development opportunities, and network with our business leaders and the other students in the program. Required Education, Experience, & Skills Must have completed at least one year towards securing a BS Engineering degree at an accredited college.Preferred Education, Experience, & Skills Hands-on experience working on FPGA related course work and/or previous internships. Pay Information Full-Time Salary Range: $46226 - $62418 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. About BAE Systems Electronic Systems BAE Systems is a premier global defense and security company with approximately 90,000 employees delivering a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support and services. The Electronic Systems (ES) sector spans the commercial and defense electronics markets with a broad portfolio of mission-critical electronic systems, including flight and engine controls; electronic warfare and night vision systems; surveillance and reconnaissance sensors; secure networked communications equipment; geospatial imagery intelligence products and systems; mission management; and power-and energy-management systems. Headquartered in Nashua, New Hampshire, ES employs approximately 13,000 people globally, with engineering and manufacturing functions primarily in the United States, United Kingdom, and Israel. Equal Opportunity Employer/Females/Minorities/Veterans/Disabled/Sexual Orientation/Gender Identity/Gender Expression

Introduction to the job ASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world's leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon. A well-rounded mechatronics engineer in this position will work on mechatronics, precision handling of delicate parts, product and system integration and software functionality, all specific to ASML products. The main focus will be mechatronics and control systems on advanced modules in lithography tools. Candidate should have direct experience in the design and test of mechatronic systems and control systems, preferably in the area industrial robotics integration. Role and responsibilities The EUV Reticle Handling, Uniformity Correction Module and Yieldstar Mechatronics Group, a division of ASML's Reticle Handling, Mechatronics and Defectivity Department, in Wilton CT is seeking a well-rounded intern to work on mechatronics, motion control, product and system integration and/or software functionality, all specific to ASML products. The main focus will be mechatronics and control systems on advanced modules in next generation High Numerical Aperture lithography tools. The job requires a strong technical individual contributor to: * Work in a team environment alongside experienced engineers on real-life mechatronics topics. * Work on solving an actual issue or design challenge the group is facing at the time. Specific tasks will also be tailored to match the education / experience level of the intern as well as the student's learning objectives for the duration. * Perform some autonomous work (modeling, data collection, data analysis, test execution in the lab or clean room) as well as some supervised and/or collaborative work. * Assignments are usually a mix of analysis and hands on work with hardware. * Document and present their findings as well as making an end of program presentation to the team about what you achieved during your internship. The goal of the internship is for you to learn about working in a corporate setting and to provide hands on experience solving real world problems in a team environment. Education and experience * Current active students in Engineering, preferably Mechanical / Mechatronics / Physics or equivalent experience. * Mechatronics engineering background or specialization in closely related areas such as robotics or other fields. * Basic experience with MATLAB / SIMULINK or similar tools. * Candidate should have direct experience in the design and test of mechatronic systems and control systems. * Ability to derive conclusions from analyses and make practical recommendations. * Strong technical writing and communication skills in English, including presenting results based on strong statistical evidence to audiences of a wide range of technical abilities. The job requires a strong technical individual contributor to: * Technically own and drive the decisions necessary to complete mechatronics design tasks (including defining solution spaces, designing simulations and testing mechatronics hardware solutions). * Work with designers from supporting engineering disciplines in order to converge on an overall design solution. * Autonomously gather necessary information to conceive and propose options in order to meet the sub-module and sub-system level requirements. * Interface with module architects to derive requirements for the sub-modules. * Write performance specification documents at sub-module level and feed sub-budgets down to the lower levels. * Create sub-module level test protocol docs and subsequent test result analysis to prove sub-module and sub-system level performance specs are met. * Understand and be able to communicate the implication of sub-module level errors on higher module level performance and on other sub-modules. * Clearly communicate technical performance in both written and verbal presentations to stakeholders Education and experience * At minimum, candidate for Bachelor's degree in a Science or Engineering discipline (such as Mechanical Engineering, Mechatronics, Electrical Engineering, or Physics), with at least 2 years completed. Preferred candidates currently in a Master's program. Skills Working at the cutting edge of tech, you'll always have new challenges and new problems to solve - and working together is the only way to do that. You won't work in a silo. Instead, you'll be part of a creative, dynamic work environment where you'll collaborate with supportive colleagues. There is always space for creative and unique points of view. You'll have the flexibility and trust to choose how best to tackle tasks and solve problems. To thrive in this job, you'll need the following skills: * Can observe and respond to people and situations and interact with others encountered in the course of work. * Can learn and apply new information or skills. * Must be able to read and interpret data, information, and documents. * Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism. * Ability to complete assignments with attention to detail and high degree of accuracy. * Proven ability to perform effectively in a demanding environment with changing workloads and deadlines. * Result driven-demonstrate ownership and accountability. * Identifies bottlenecks and drives improvements. * Work independently or as part of a team and follow through on assignments with minimal supervision. * Demonstrate open, clear, concise and professional communication. * Ability to establish and maintain cooperative working relationships with manager, co-workers and customer. * Work according to a strict set of procedures within the provided timelines. * Candidate must have strong communicative skills with a commitment to achieving results on time. * Candidate shall be a demonstrated "team player" with a quality orientation and interpersonal skills * Experience with PID controllers, linear and nonlinear calibrations, flexible dynamics. * Ability to interface with multidisciplinary groups and work effectively in a team. Willingness to take on responsibility, follow through and keep multiple simultaneous assignments on schedule. * Ability to quickly acquire technical knowledge from documentation and on-the-job training. Capability to thoroughly investigate technical issues (analytically and hands-on in a lab environment). Other information ASML Offers: * A challenging opportunity to expand your knowledge in a wide variety of engineering application areas and to work on problems spanning all technical fields. * Highly creative and qualified teams with a diversity of experience. * Great career opportunities at a quickly growing high-tech company. * World class technical problems to solve. Role within Office Responsibilities: * Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus. * Occasionally lift and/or move up to 20 pounds. * Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Role within the Factory Responsibilities: * Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves for entire duration of shift. * While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. * The employee may occasionally lift and/or move up to 50 pounds. * Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * Can work under deadlines. * The environment generally is moderate in temperature with moderate to high noise level. * Must be willing to work a compressed work week schedule- twelve-hour long shift and rotating from three to four days a week. * This must include references to day and night shifts for accommodation purposes. Additional Responsibilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Must be willing to work in a clean room environment, wearing coveralls, hoods, booties, safety glasses and gloves. Working under ISO 9000/14000 standards. * The environment in the cleanroom is moderate in temperature with moderate to high noise level. * Safely working around lasers; on ladders; on platforms; around chemicals; near strong magnetic fields; around high voltage and currents. * The employee is occasionally required to move around the campus. Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

The Business Engineering intern will work within the Business Engineering team who support the Directors of Assembly & Test, Optics Fabrication, Engineering and Factory Logistics. Your Assignment: Business engineers help unlock critical data and information, drive analyses and insights, set up reporting and dashboards, derive improvement plans and key messages. Typical areas for investigation are: Production norms and labor hour studies. Resource capacity and efficiency. Move rate capability and constraints. Cycle time and blueprints. Time studies Data analytics In this role, you will be able to further develop your analytical skills, business perspective, influencing skills, presenting techniques and project management capabilities. Your Profile: Pursuing a Bachelor or Master of Science in Industrial Engineering, Data Analytics, Business Administration, or General Engineering. Experience minimum 3 years of school completed by the start of the internship Masters preferred Experienced with IT-systems in the area of production-control (Excel, SAP, SAP ME/ BO, SAP HANA, Spotfire, Tableau, Power BI) preferred. Ambitious, enthusiastic and with a pro-active, initiating attitude. Strong analytic capability: able to create transparency, set up structures, think in processes, work accurately. Self-assured, capable of convincing people, also at higher management levels. Strong communication and presentation skills. Collaborative and constructive attitude with some business acumen. Ability to convert complex (often data driven) matter to clear overviews and insights. One previous internship that was either project or data based preferred Personal skills Can observe and respond to people and situations and interact with others encountered in the course of work. Can learn, adapt, and apply new information or skills. Must be able to read and interpret data, information, and documents. Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism. Ability to complete assignments with attention to detail and high degree of accuracy. Proven ability to perform effectively in a demanding environment with changing workloads and deadlines. Result driven-demonstrate ownership and accountability. Identifies bottlenecks and drives improvements. Work independently or as part of a team and follow through on assignments with minimal supervision. Demonstrate open, clear, concise and professional communication. Ability to establish and maintain cooperative working relationships with manager, co-workers and customer. Work according to a strict set of procedures within the provided timelines. Other Information This position is located on-site in Wilton, CT. It requires onsite presence to attend in-person work-related events, training courses and meetings and to further ensure teamwork, collaboration, and innovation. Role within Office Responsibilities Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus. Occasionally lift and/or move up to 20 pounds. May require travel (specify domestic and/or international) dependent on business needs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

The Engineering Intern is a college student in an accredited BSCE program. This individual will assist in the design of a variety of municipal and infrastructure projects (owned by municipalities and/or local school districts). Such projects may include roads, underground utilities, public buildings, recreational facilities, and parking facilities. We are seeking Civil, Mechanical, Electrical, Structural, Engineering Interns. PRIMARY DUTIES: · Develop or implement engineering solutions to assist clients with improving and maintaining their infrastructure. - Design transportation, utility, facility, or hydraulic systems or structures (as appropriate) using computer assisted design or drawing tools. - Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications. - Assisting with building system design, including HVAC layouts, plumbing, and fire protection detail - Supporting electrical and lighting design efforts for municipal and educational facilities. - Performing basic engineering calculations and collecting design data to support both civil and MEP project teams. - Estimate quantities and cost of materials, equipment, or labor to determine project feasibility. - Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data. - Conduct studies of traffic patterns or environmental conditions to identify engineering problems and assess potential project impact. - Perform all design activities ensuring compliance with environmental, safety, or other governmental regulations. - Prepare public reports on topics such as bid proposals, project status reports and design criteria reports. - Support of the field activities of project construction inspection staff, relating to design criteria, value engineering or changing site conditions. KNOWLEDGE, SKILLS and ABILITIES: · Oral and written communication skills · Ability to make public presentations · Ability to define problems, collect data, establish facts and draw conclusions to present to design team members. · Strong organizational skills and attention to detail · Knowledge of computer aided design software · Ability to work in groups as well as individually · CADD Experience a Plus EDUCATION/EXPERIENCE: · Pursuit of a Bachelor's of Science Degree in Civil, Electrical, Mechanical Engineering from an accredited four-year college or university What We Offer Paid internship with mentorship from experienced engineers Hands-on project experience that builds technical and professional skills Networking opportunities within RVE's multidisciplinary teams Potential for full-time employment upon graduation PHYSICAL DEMANDS AND WORKING ENVIRONMENT: While performing the duties of this job, the employee occasionally works in the field and may be exposed to outside weather conditions. Work requires frequent and prolonged computer use. May occasional lifting up to 25 pounds. This company is an Equal Opportunity Employer. We invite resumes from all qualified, interested parties, regardless of race, gender, national origin, religion, sexual orientation, disability, age, or any other protected classification under national or local law. While this job description is intended to be an accurate reflection of the job requirements, management reserves the right to modify, add, or remove duties from particular jobs and to assign other duties as necessary.

GENERAL PURPOSE The Software Engineer Intern will assist with new product development of embedded devices for the audio-visual market such as PTZ cameras, AV Mixers, and Audio Peripherals. Working under the guidance of the software supervisor, the candidate will develop software for assigned projects in coordination with other software, hardware, and FPGA team members for design implementation and verification of new products. Responsibilities will include learning to build tools related to embedded Linux, writing code for assigned projects, participating in code reviews, test and fixing bugs. DUTIES AND ACCOUNTABILITIES New Product Development Work with software, hardware, and FPGA departments to create innovative new products for the AV market. Design, implement, and verify embedded software on target platforms for assigned projects. Continuous Improvement Projects Assist in implementing new feature enhancements and bug fixes on existing products as assigned. Work with the test department in the verification/validation of related firmware releases. DevOps Support Learn the various toolchains associated with current software development and production of our products. Assist in the creation, administration, and maintenance of the tools associated with the development and production of our products. Research new DevOps platforms that may improve our development process or increase productivity with the software group. JOB REQUIREMENTS Essential Knowledge, Skills, and Abilities Required: Knowledge or interest in Embedded Linux and associated toolchain Interested in design, verification, and validation of software. Ability to create and maintain timelines for deliverables as assigned Familiar with Python, C++, or similar programming languages. Familiar with Agile, Waterfall, and other development methodology GIT/SCM knowledge Minimum Education and Experience Required: Working towards a Bachelor's degree in software engineering or a related technical degree. WORKING CONDITIONS/PHYSICAL DEMANDS General office environment May require occasional ground travel to other company facilities within the local metropolitan area Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Legrand is proud to be an Equal Opportunity Employer. You will be considered for this position based on your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled, or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. If you'd like to work in a fun, creative, business-casual environment that offers a comprehensive benefit package, we encourage you to apply! Legrand is an equal employment opportunity employer. For California residents, please see the link for the Privacy Notice for Candidates. California law requires that we provide you this notice about the collection and use of your personal Information.

Job DescriptionScientist - Engineer, MSAT The Scientist-Engineer, MSAT performs process and analytical experimental studies as part of a team that is effectively delivering cell therapy services to clients in accordance with defined scope of work, timelines, and budgets. This includes leading projects in process development, technology transfer and continuous improvement of our client's novel manufacturing processes. Our goal is to support our clients in developing commercially viable cell therapy products, so that they can become accessible to all. Accountable for the design and execution of experimental studies in the laboratory, for example: Perform laboratory experiments for client projects Perform analytical testing for client projects Preparation and scheduling of laboratory equipment for experiments Provide technical leadership of client products during manufacturing and development, for example: Direct technical communication with clients during manufacturing and development Support manufacturing in identifying and resolving manufacturing process constraints Lead the generation of manufacturing and development documentation, for example: Generating experiment protocols and reports for development projects Generating draft batch records and other manufacturing documentation Generating manufacturing risk assessments, such as FMEA Perform data analysis to reach actionable conclusions, for example: Compile and analyze experimental data Present experimental data internally and externally to clients Supervise direct reports. REQUIREMENTS Bachelor's degree in relevant life science or engineering discipline Minimum of 3 years' experience in aseptic cell processing, cell culture and cell analytics under the guidance of scientific protocols Demonstrated ability to deliver projects to specific timelines and budgets Experience in working effectively and delegating tasks in a team-based environment Demonstrated ability in technical writing and the preparation of, protocols and reports, presentations and/or other communications Basic understanding of the technical principles, theories and concepts of cell therapy or similar products Aseptic processing, Good Manufacturing Practice (GMP), communication skills, specific process and analytical equipment This job may require occasional evening and weekend work.

Introduction IBM Research takes responsibility for technology and its role in society. Working in IBM Research means you'll join a team who invent what's next in computing, always choosing the big, urgent and mind-bending work that endures and shapes generations. Our passion for discovery, and excitement for defining the future of tech, is what builds our strong culture around solving problems for clients and seeing the real world impact that you can make. IBM's product and technology landscape includes Research, Software, and Infrastructure. Entering this domain positions you at the heart of IBM, where growth and innovation thrive. Your role and responsibilities As an intern, you will contribute to the development of a distributed cloud platform designed to support quantum workloads. Your work will focus on Python-based development, infrastructure maintenance, and ensuring the reliability and scalability of the platform. You will collaborate with cross-functional teams to integrate quantum computing capabilities into cloud-native environments, helping to build the foundation for future quantum applications. This role requires a solid understanding of Python programming, cloud infrastructure concepts, and an interest in quantum computing technologies. Required education High School Diploma/GED Preferred education Bachelor's Degree Required technical and professional expertise * Python * API Rest * Django * Docker Preferred technical and professional experience * Qiskit * Kubernetes ABOUT BUSINESS UNIT IBM Research is the organic growth engine of IBM and an innovation engine for our customers and partners. As part of this mission, IBM Research anticipates and examines 'What's Next in Computing' to ultimately create and integrate the technologies the world relies upon to solve big challenges and unlock new opportunities. We create and pioneer new markets for IBM, our partners and customers as exemplified in our ongoing quest to reach practical and large-scale quantum computing. Across IBM Research, we realize the power and potential to accelerate discovery with our partners and clients by combining the power of high performance computing, AI, and Quantum, all integrated through the hybrid cloud. YOUR LIFE @ IBM In a world where technology never stands still, we understand that, dedication to our clients success, innovation that matters, and trust and personal responsibility in all our relationships, lives in what we do as IBMers as we strive to be the catalyst that makes the world work better. Being an IBMer means you'll be able to learn and develop yourself and your career, you'll be encouraged to be courageous and experiment everyday, all whilst having continuous trust and support in an environment where everyone can thrive whatever their personal or professional background. Our IBMers are growth minded, always staying curious, open to feedback and learning new information and skills to constantly transform themselves and our company. They are trusted to provide on-going feedback to help other IBMers grow, as well as collaborate with colleagues keeping in mind a team focused approach to include different perspectives to drive exceptional outcomes for our customers. The courage our IBMers have to make critical decisions everyday is essential to IBM becoming the catalyst for progress, always embracing challenges with resources they have to hand, a can-do attitude and always striving for an outcome focused approach within everything that they do. Are you ready to be an IBMer? ABOUT IBM IBM's greatest invention is the IBMer. We believe that through the application of intelligence, reason and science, we can improve business, society and the human condition, bringing the power of an open hybrid cloud and AI strategy to life for our clients and partners around the world. Restlessly reinventing since 1911, we are not only one of the largest corporate organizations in the world, we're also one of the biggest technology and consulting employers, with many of the Fortune 500 companies relying on the IBM Cloud to run their business. At IBM, we pride ourselves on being an early adopter of artificial intelligence, quantum computing and blockchain. Now it's time for you to join us on our journey to being a responsible technology innovator and a force for good in the world. IBM is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, neurodivergence, age, or other characteristics protected by the applicable law. IBM is also committed to compliance with all fair employment practices regarding citizenship and immigration status. OTHER RELEVANT JOB DETAILS Supplemental 1 employees may be eligible for up to 8 paid holidays, minimum of 56 hours paid sick time and the IBM Employee Stock Purchase Plan. IBM offers paid family medical leave and disability benefits to eligible employees where required by applicable law. This position was posted on the date cited in the key job details section and is anticipated to remain posted for 15 days from this date or less if not needed to fill the role. We consider qualified applicants with criminal histories, consistent with applicable law. The compensation range and benefits for this position are based on a full-time schedule for a full calendar year. The salary will vary depending on your job-related skills, experience and location. Pay increment and frequency of pay will be in accordance with employment classification and applicable laws. For part time roles, your compensation and benefits will be adjusted to reflect your hours. Benefits may be pro-rated for those who start working during the calendar year. This position is eligible for participation in an IBM Sales Incentive plan. Actual incentive opportunity will be based on performance and the eligible Target Incentive, as addressed in the applicable plan, all of which is subject to change. The compensation range listed for this position is the IBM Reference Salary that is used when you are not actively participating in a sales plan. Your actual base pay plus incentive opportunity will be determined by the Incentive Plan assigned to you.

Secondary Locations Job Code **18942** \# of openings **1** Apply Now (**************************************************** Requisition?org=POWERENGINEERS&cws=44&rid=18942) **This Opportunity - Civil/Structural Engineering Intern Summer 2026** Our Power Team is seeking a **Full Time Civil/Structural Engineering Intern Summer 2026** to work out of our **Oradell, NJ** office. This temporary position is seeking individuals currently enrolled in an Undergraduate or Graduate degree program. WSP USA hosts hundreds of internships across the United States to gain hands-on, meaningful work experience to enhance their education and professional aptitude. Our interns gain exposure to real projects while working side by side with senior staff. Through our Developing Professionals Network, interns gain mentorship, networking opportunities and lifelong career connections. This internship is anticipated to take place during the Summer 2026 semester. The program is anticipated to take place from May 18, 2026 through August 7, 2026. The individual start date is flexible. **Your Impact** + Support a variety of engineering tasks with the goal to develop technical, social, and ethical skills. + Learn basic principles of Civil Engineering with a focus on structural design. + Work with experienced engineers on utility substation design projects. + Assist senior engineers in developing detailed structural design calculations and analyses of concrete elements, concrete foundations and steel structures in accordance with industry codes and standards (ASCE7, ASCE113, ACI 318, AISC 360, NESC, IEEE, etc.). + Assist in creating engineering drawing markups for drafting that align with design calculation results. + Complete training on assigned tasks. + Exercise responsible and ethical decision-making regarding company funds, resources and conduct, and adhere to WSP's Code of Conduct and related policies and procedures. + Perform additional responsibilities as required by business needs. + Please note that there is no relocation or housing assistance associated with this internship. **Who You Are** **Required Qualifications** + Actively enrolled in an accredited Civil Engineering with a structural focus, or related, Undergraduate program with an anticipated graduation date of August 2026 or later. + Must be 18 or older. + Demonstrated interest in structural design, consulting engineering, and the power and utilities industry, or related field, and have a strong desire to advance skills related to WSP's work and projects. + Competent interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience. + Capable of taking direction from leadership, mentors, and managers to execute projects. + Basic proficiency with technical writing, office automation, software, spreadsheets, technology, and tools. + Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies. + Authorization to work in the United States at the start of the internship. **Preferred Qualifications** + Actively enrolled in an accredited Civil Engineering with a structural focus or related, Master's or PhD program with an anticipated graduation date of August 2026 or later. + Successful completion of junior-level courses in power system analysis and/or power system protection + Prior internship and leadership involvement on campus. POWER Engineers, Member of WSP, is a global consulting environmental and engineering firm and one of the top design firms in the energy sector. Together, POWER and WSP's 73,900 experts create positive, long-lasting impacts for our communities and our clients in the power and energy, transportation and infrastructure, environmental, and property and buildings sectors. As part of our team, you'll discover a world of opportunities to connect with innovative thinkers, forge your path, and have fun tackling the world's most challenging projects. At POWER Engineers, Member of WSP, you can have a rewarding career on every level. Our philosophy is simple: Do Good. Have Fun. Build Success. We are a fun engineering firm. That might seem contradictory to some, but it works for us! POWER is an Equal Opportunity Employer, including women, minorities, veterans and individuals with disabilities. Compensation: Expected Pay (all locations): $19.13 - $30.00 Per hour WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. WSP USA reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, and/or federal law. \#LI-GA1 \#LI-GA1

This role requires the ability to work lawfully in the U.S. without employment-based immigration sponsorship, now or in the future. At a Glance * You're a motivated rising senior student with a 3.0 GPA or higher seeking a degree in one of the following areas listed below from an accredited college or university: * Data Science * Business Administration * Finance * Information Technology * Computer Science * Business Technology Management * Information Science * Management and Organization * This is a full-time, 10-week program designed to give you real-world experience working within the telecommunications industry in your field of choice. * Internship program runs from May 27 through July 31, 2026. * In addition to the role-based projects you'll work on, you'll also participate in professional development sessions, networking opportunities, and have access to a mentor. The Spectrum Internship Experience You'll join one of our departments for the summer, where you'll contribute to meaningful projects that give you insight into what it's like to work at a leading connectivity company. You'll have access to: * Opportunities to gain new skills and elevate the ones you already have, all in a robust and forward-thinking business setting. * Build connections with our team members and senior leaders who can help you better understand what our business looks like and what it's like to work here. * Receive mentorship from a member of our team, who can provide one-on-one advice to help you reach your professional goals. What you can expect in this role As a Spectrum intern, you'll spend the summer working alongside two teams - your respective department and your intern peer group. Department and team-focused projects account for about 80% of your schedule. You'll spend the other 20% on professional development sessions and networking activities, including the Kickoff Conference on May 27th, webinars, community service, cross-functional projects, and final presentations. Internship responsibilities may include * Understand and help enhance current analytical models, assist in developing an automated scraping tool, data aggregation and analytics, ad hoc projects Required qualifications * Must be currently enrolled in an accredited College or University graduating with a bachelor's degree between December 2026 - May 2027 * Must have at least a 3.0 GPA or greater in current program * Ability to travel locally to Spectrum intern development events and activities throughout the program * Authorization to work in the U.S. without restrictions or need for future sponsorship Preferred qualifications * Ability to work in a team environment * Oral and written skills * Organizational skills * Problem solving abilities * Proficient in Software including Adobe, Microsoft Excel, and Microsoft Word * Powerpoint * Python * SQL * MSOffice * AWS #LI-AC2 GGN100 2025-60903 2025 Here, our employees don't just have jobs, they're building careers. That's why we offer a comprehensive pay and benefits package that rewards employees for their contributions to our success, supporting all aspects of their well-being at every stage of life. A qualified applicant's criminal history, if any, will be considered in a manner consistent with applicable laws, including local ordinances. Get to Know Us Charter Communications provides superior communication and entertainment products for residential and business customers through the Spectrum brand. Our offerings include Spectrum Internet, TV, Mobile and Voice. Beyond our connectivity solutions, we also provide local news, programming and regional sports via Spectrum Networks and multiscreen advertising solutions via Spectrum Reach. When you join our team, you'll be keeping our customers connected to what matters most in 41 states across the U.S. Watch this video to learn more. Grow Your Career Here We're committed to growing a workforce that reflects the customers and communities we serve - providing opportunities for employment and advancement to all team members. Spectrum is an Equal Opportunity Employer, including job seekers with disabilities and veterans. Learn about Life at Spectrum.

Job DescriptionDescription: RK Pharma Inc, a vertically integrated pharmaceutical company with our main manufacturing site in Pearl River, NY, is seeking an Engineering Associate to work with our growing Engineering and Manufacturing Teams as we scale towards commercial manufacturing in the next upcoming months. As a company focused on the development, manufacturing and sale of high quality and affordable generic pharmaceutical products worldwide we are looking for sharp, driven, self-directed individuals to help us grow our mid-stage start-up team. This position is located in Pearl River, NY and is required to be onsite. Requirements: If this sounds interesting to you, it's probably because up to this point you have: High school diploma or GED required; Engineering degree or trade school degree preferred. 2-4 years of engineering and maintenance experience, preferably in a pharmaceutical, manufacturing, or regulated environment. Strong knowledge of manufacturing processes and equipment. Familiarity with cGMP, GDP, and standards a plus. Proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint) and experience with ERP or document management systems (e.g., SAP, Master Control). Excellent organization, time management, and communication skills. The main responsibilities for this position are: Responsible for maintaining Electrical Systems (Panels, MCCs, Distribution Panels, etc.), water systems (soft water, RO, WFI and Clean Steam), HVAC system (AHUs, chillers, Heat exchangers) Responsible for daily walk throughs and make sure all Equipment's and utilities are working well Coordinate with Technicians and Electricians to complete assigned PM, troubleshooting jobs in timely manner Assist Engineering team in Temperature Mapping of the stability chambers. Provide assistance to external vendors as and when required Assist and support Engineering team on day-to-day activities Assist and support EHS team as and when required If this sounds like something that is of interest to you, please don't hesitate to apply to start a conversation. We look forward to getting to know more about you and the skills you can bring to a company like RK Pharma Inc. RK Pharma Inc is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

About the Company: Aerolase is the fastest growing medical laser company, serving the high growth dermatology and aesthetic laser market. Nestled in the picturesque Hudson Valley in Tarrytown, NY, the location is also ideal for access to NY City and other areas of the Northeast and Mid-Atlantic U.S. We are hiring in many areas and currently seek laser optical engineering technicians with a passion for creating new things. The company offers a friendly, team-oriented work environment and competitive compensation including salary, bonus, stock options, 401k, and health/dental/life insurance plans. About the Team: • We are a diverse team of friendly, creative hard-working people with a passion for achieving our objectives • We are creative, hands-on and innovative with a strong orientation toward high customer satisfaction • We have created a very team-spirited company culture and believe it is important to have open and effective cross-functional collaboration and communications - and enjoy our work! About the role: We're looking for an enthusiastic, creative and detail-oriented problem solver to help support the production, service and repair of our unique solid-state laser devices. Must have expertise working hands-on with assembly and/or development of small, sensitive, high precision instruments, preferably solid-state laser technology, with a high caliber technology company. We prefer design and hands-on experience in multiple laser technologies including solid state lasers, semiconductor lasers, non-linear optical materials and devices, optical benches, and beam directors. Experience with the technical aspects of developing laser and laser-based products is preferred. Candidates should have proven ability to address complex challenges with ingenuity and innovation, and capability to work independently to manage multiple simultaneous tasks, and see all tasks to completion. Also should have the ability to work well in a collaborative multidisciplinary team environment, define and analyze system performance specifications, and ensure adherence to those specifications in the application environment. Responsibilities: • Test, troubleshoot repair and assemble lasers, subassemblies and various components, including high-voltage laser power supplies and other electronics. • Support the development and implementation of test fixtures, equipment, procedures and documentation for the engineering and operations functions. • Support product design and development activities related to new products and product improvements. • Support development and maintenance of quality and regulatory documents and procedures. • Maintain thorough, complete and accurate written records; comply fully with the company's quality system and any regulatory requirements. • Follow safety rules for working with high-voltages and high-power lasers. • Perform other duties as completion of responsibilities necessitates or as assigned by supervisor. Skills and Experience: 1. Minimum 1-3 years of experience in a technical role involving high power pulsed power supplies. 2. Understanding of system, board and component design, testing and troubleshooting. 3. Theoretical and practical knowledge and skills of adequate policies and procedures for the control of laser hazards and high voltage hazards, using relevant protective equipment, ensuring adequate safety education and training of other personnel. 4. Enjoy working with your hands/mechanical ability. 5. Strong analytical and problem solving skills. 6. Proven technical and project management skills. 7. Experience with manufacturing within a Quality Management System (especially medical). 8. Strong interpersonal and communication skills. 9. Self-motivated, detail oriented and well organized. Ability to make decisions and work independently Strong work ethic and desire to help the company successful by producing a reliable product. 10. Not afraid to ask questions and make suggestions for improvement. 11. Be able to work under pressure due to customer demands. 12. Strong computer skills (Windows™ software). 13. Ability to successfully manage multiple projects and daily responsibilities. Ability to discern and appropriately communicate sensitive issues. 14. Ability to walk, stand, bend, reach, stoop/squat, and crouch. Ability to carry heavy items. Educational Requirements: 15. A.S. or higher in technical discipline, optical engineering preferred

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Manager Engineering - Lead Program & Special Projects, the Associate Engineer - Lead Program will be assisting in the construction delivery for the Lead Service Line Replacement Program. This engineer will provide support to the Manager Engineering - Lead Program & Special Projects for the delivery of the $36M 2023 lead service line replacement program, which will result in the annual replacement of 2,600 service lines. More specifically, the engineer will be provide assistance with work order management, data compilation, analyzing data to generate metrics on a weekly basis, and will assist in response to field-related matters including materials releases, acquisition of information from GIS, and invoice review to ensure appropriate billing. Incumbent will also generate proper documentation for work order creation and closure. This engineer will provide the assistance needed to the Manager to ensure the successful and quality construction delivery of the LSLR Program. Primary Duties/Responsibilities: Use of company resources including Hexagon, GIS, Google applications, and other electronic applications. This person may be required to perform inspections of new installations or other duties as assigned. Responsible for the generation of weekly metrics, review and closing of work orders, work order generation, and interfacing with contractors, internal departments, and customers for the efficient and quality delivery of the lead service line replacement program. Conduct field visits to confirm location of any existing facilities as required. Field supervision of construction projects. Work with other departments including Operations, Water Quality, and Customer Service. Assist engineers in developing analysis and reports to be provided to regulators, internal or external customers as required. Maintain Key Performance Indicators to track performance and productivity. Work Environment: The work environment is typically in an office/field environment but requires periodic inspection of the facilities where the employee will also be occasionally exposed to outside weather conditions and an industrial plant environment which involves moderate exposure to unusual elements, such as extreme temperatures, dirt, dust smoke, unpleasant odors, and/or loud noises. Work environment also involves some exposure to hazards or physical risks, which require following industry safety procedures. Certain projects may also require for construction to take place off hours (overnight/weekends). The duties of this position will require occasional travel to sites in Bergen/Hudson counties and infrequent travel to sites in Passaic and Sussex Counties, in New Jersey. Qualifications Education/Experience/Background: Bachelor's degree with either a Master's in Civil/Environmental Engineering or an MBA 0-2 years experience of engineering design in a water utility environment, preferred. Field experience and knowledge related to the construction delivery of water underground utility infrastructure projects. Experience in Water/Wastewater Engineering is a plus. Fundamental experience as an Engineer for underground infrastructure projects including service line replacements and distribution main projects. Familiar with underground construction techniques including open cut and trenchless (pulling or boring) and utility connections and abandonments. Experience in managing and adhering to project budgets and schedules. ESRI/GIS experience is a plus. Knowledge/Skills/Abilities: High attention to detail. Excellent analytical, organizational, computer and interpersonal skills. Exercise discretion and independent judgment. Extensive Knowledge of MS Office and AutoCAD. Intermediate Microsoft Excel skills are a must. Able to work independently and on a team. Good communication skills (verbal and non-verbal). Ability to read maps and verbally communicate with internal and external customers. Excellent time-management skills to be able to prioritize competing tasks. Required Certification/Licenses/Training: Engineering in Training Certificate is a plus. Physical Requirements: Travel Flexibility; ability to stand, sit in front of computer for extended periods of time. Additional Information Pay Range: $70000 to $80000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

ABOUT YOU Are you a passionate problem solver? Do you act with integrity and hold yourself and others to the highest standard? If the answer is, “Yes!” then we have an opportunity that will impress you. We are looking for a highly motivated Structural Engineering Intern who is passionate about the construction process to join our White Plains, NY team. At OneFourTwo, every associate is empowered to drive their success. The anticipated start date for this opening is Summer 2026. WHAT WE CAN OFFER YOU We are dedicated to the well-being of our associates and are proud to be consistently recognized as a Best Place to Work. Our compensation and benefits package not only supports our associates and their families but benefits local communities and communities around the world. - Competitive hourly rate (with overtime possible) - Housing stipend (based on need) - Medical, dental, and vision insurance coverage when you Intern or Co-op with us for at least 3 months - Company sponsored lunches, happy hours and events - Stocked kitchen with coffee, soda, and snacks At OneFourTwo, our first core value is to treat people fairly and do the right thing. We are proud to be a drug-free workplace and an equal opportunity employer, and all qualified applicants will receive consideration for employment. From recruiting, training, and hiring practices to selecting our subcontractors, we understand that diversity of all those involved in the construction process enhances our ability to deliver the best solutions to our customers. We hire the best and the brightest from across the country - constructing a team of experts in architecture, design, engineering, project management, and business services. A DAY IN THE LIFE We are looking for a highly motivated Structural Engineering Intern, who is passionate about the construction process to join our team. At OneFourTwo, an Intern/Co-op has the opportunity to assist their team with the following: - Communicate with technical drafting staff, clients, and other outside project team members - Prepare preliminary designs for clients - Review building codes to assure correct implementation of preparation and design - Attend client meetings, coordinate with construction project managers, architect, civil, and mechanical engineers - Produce structural calculations for implementation with technical drafting staff during preparation of construction documents for permit submittal as well as construction - Produce construction ready design drawings coordinated with all disciplines to assure complete and accurate agreement At OneFourTwo, our first core value is to treat people fairly and do the right thing. We are proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment. NECESSARY QUALIFICATIONS - Minimum Grade Point Average of 3.0 out of 4.0 - Enrolled in Civil Engineering degree program - Co-op or Intern construction experience preferred - Excellent verbal communication skills and a strong work ethic MAKE YOUR MOVE At OneFourTwo, we believe that every structure has a unique story to tell. Our journey began with a passion for creating spaces that seamlessly blend form and function. Over the years we have evolved into a dynamic team of architects and engineers committed to delivering excellence. Whether you're embarking on a new project or revitalizing an existing space, OneFourTwo Design Group is here to turn your vision into reality. Let's build something extraordinary together! OneFourTwo does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from OneFourTwo's Human Resource team. Pre-approval is required before any external candidate can be submitted. OneFourTwo will not be responsible for fees related to unsolicited resumes and for candidates who are sent directly to our hiring managers. #LI-CM5 #LI-Onsite LEGAL DISCLAIMER EOE, including disability/vets

IRI believes in commitment, Integrity and strategic workforce solutions. Integrated Resources, Inc., is led by a seasoned team with combined decades in the industry. We deliver strategic workforce solutions that help you manage your talent and business more efficiently and effectively. Since launching in 1996, IRI has attracted, assembled and retained key employees who are experts in their fields. This has helped us expand into new sectors and steadily grow. We've stayed true to our focus of finding qualified and experienced professionals in our specialty areas. Our partner-employers know that they can rely on us to find the right match between their needs and the abilities of our top-tier candidates. By continually exceeding their expectations, we have built successful ongoing partnerships that help us stay true to our commitments of performance and integrity. Our team works hard to deliver a tailored approach for each and every client, critical in matching the right employers with the right candidates. We forge partnerships that are meant for the long term and align skills and cultures. At IRI, we know that our success is directly tied to our clients' success. Job Description Knowledge of good laboratory practices (GLP) desirable. Knowledge of the operation of mechanical measurement equipment (e.g.Instron) desirable. Extensive hands-on mechanical laboratory testing involving tension, compression and torsion testing Additional Information Regards, Monil Patel Technical Recruiter Integrated Resources, Inc (732) 844-8747 Ext.338 monil @irionline.com