Engineering internship jobs in Connecticut

Introduction The State of Connecticut, Department of Energy and Environmental Protection (DEEP) is seeking to fill an Engineer Trainee vacancy in the Investigations Unit of the Bureau of Air Management's Enforcement Division. This position will be located in Hartford, CT. WHAT'S IN IT FOR YOU: Visit our new State Employee Benefits Overview page! Professional growth and development opportunities A healthy work/life balance! Thirteen (13) paid holidays each calendar year. Employees who are requested to work as part of a regular schedule on a “premium” holiday (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day and Christmas Day) shall be paid at the rate of time and one-half for hours worked in addition to regular pay for the day. Position Highlights This position receives training under the direction of a supervisor or senior staff for a period of one year. Promotion to Environmental Protection Air Pollution Control Engineer 1 will occur after successful completion of the training program. This position will require routine in-state travel in support of the unit's work, e.g., conducting on-site inspections. This position will require infrequent out-of-state travel for training and to attend regional and national work groups and conferences. Within the Enforcement Division, the Investigations Unit is responsible for: Implementing the Department's Geospatial Measurement of Air Pollution (GMAP) program. The GMAP program involves the use of a motor vehicle equipped with air pollution analyzers, meteorological instrumentation, and GPS to conduct mobile enforcement screening and community-based monitoring of criteria air pollutants, air toxics, and greenhouse gases. The GMAP program plays an important role in enhancing the Department's responsiveness to residents' air quality concerns and in advancing the Department's commitment to community engagement and environmental justice/equity. Conducting inspections in response to public complaints. Conducting inspections of air pollution sources. About Us CT DEEP is charged with conserving, protecting, and improving Connecticut's natural resources and environment as well as making clean, reliable, and affordable energy available for the people and businesses of the state. The agency is also committed to playing a positive role in supporting economic development and job creation in Connecticut as well as fostering a sustainable and prosperous economic future for the state. Within the Bureau of Air Management (BAM), our mission is to protect human health, safety, and the environment and to enhance the quality of life of Connecticut citizens by implementing regulatory programs and supporting policies to advance clean air and climate change objectives, advance radiation safety, and promote public health. The Bureau consists of four divisions: Planning & Standards, Engineering, Radiation, and Enforcement. Selection Plan FOR ASSISTANCE IN APPLYING: Check out our Applicant Tips on How to Apply! Need more resources? Visit our Applicant Toolkit for additional support throughout the recruitment process. BEFORE YOU APPLY: Meet Minimum Qualifications: Ensure you meet the Minimum Qualifications listed on the job opening by the job closing date. You must specify your qualifications on your application. The minimum experience and training requirements listed must be met by the close date on the job opening, unless otherwise specified. Educational Credits: List your earned credits and degrees from accredited institutions accurately on your application. To receive educational credits towards qualification, the institution must be accredited. If the institution of higher learning is located outside of the U.S., you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the contact listed below by the closing date listed on the job posting. Resume Policy: Per Public Act 21-69, resumes are not accepted during the initial application process. As the recruitment process progresses, candidates may be required to submit additional documentation to support their qualification(s) for this position. This documentation may include: a cover letter, resume, transcripts, diplomas, performance reviews, attendance records, supervisory references, licensure, etc., at the request and discretion of the hiring agency. Preferred Shift/Location: Select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift. Timely Submission: All application materials must be received by the job posting deadline. You will be unable to make revisions once you officially submit your application to the State. Late submissions are rarely accepted, with exceptions only for documented events that incapacitate individuals during the entire duration of the job posting. Request exceptions by emailing ***************. Salary Calculations: For current state employees, salary calculations are not necessarily comparable from one of the three branches of state government (i.e., Executive, Legislative, Judicial) to the other. Note: The only way to apply to this posting is via the ‘Apply' or ‘Apply Online' buttons on the official State of Connecticut Online Employment Center job posting. AFTER YOU APPLY: Referral Questions: This posting may require completion of additional Referral Questions (RQs), which must be completed by the questionnaire's expiration date. If requested, RQs can be accessed via an email sent to you after the job close date or by visiting your JobAps Personal Status Board (Certification Questionnaires section). Prepare For An Interview: Interviews are limited to those whose experience and training are most aligned with the role. To prepare, review this helpful Interview Preparation Guide to make the best impression! Stay connected! Log in daily to your JobAps Personal Status Board to track your status and check email (including spam/junk folders) for updates and tasks. The immediate vacancy is listed above, however, applications to this recruitment may be used for future vacancies in this job class. Note: This position will be filled in accordance with contractual language, reemployment, SEBAC, transfer, promotion and merit employment rules. Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State employees, available at ****************** QUESTIONS? WE'RE HERE TO HELP: Due to high volume, we are unable to confirm receipt or provide status updates directly. For recruitment updates, please check your Personal Status Board and review our Frequently Asked Questions. If you have additional questions about the recruitment process, reach out to Nick Naples at **********************. Join the State of Connecticut and take your next career step with confidence! PURPOSE OF JOB CLASS (NATURE OF WORK) In a state agency this class is accountable for receiving training in introductory professional engineering work for the development of technical and professional engineering skills and knowledge in order to qualify for advancement to the technical engineering work of the agency. EXAMPLES OF DUTIES Operate and maintain the Investigation Unit's GMAP vehicle; Operate, maintain, and calibrate the air pollution analyzers within the GMAP vehicle; Operate and maintain the meteorological instrumentation and GPS within the GMAP vehicle; Maintain an inventory of spare parts, calibration gases, and other expendables necessary for the operation of the GMAP instrumentation; Gather, synthesize, and prepare GMAP-acquired air quality data for supervisory review; Validate GMAP-acquired data; Assist in establishing community-based air quality monitoring programs; Assist in conducting public outreach and participating in air quality workshops; Participate in programs that promote environmental justice and equity; Assist in developing emerging uses for the GMAP instrumentation; Attend classroom training, workshops, seminars, or meetings to maintain and grow knowledge of the latest technology, information, and research within the field of air monitoring and GMAP; Conduct acceptance testing of new equipment and prepare reports on findings; Conduct inspections of certain sources of air pollution; Respond to public complaints of potential air pollution incidents; Prepare inspection reports; Draft enforcement actions; Prepare memoranda and correspondence. KNOWLEDGE, SKILL AND ABILITY Knowledge of basic engineering theories, principles and methods; Skill in the use of drafting and calculating instruments; Considerable ability to perform mathematical computations, making neat and accurate drawings and preparing minor design and structural details; Ability to utilize computer software. MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE Candidates must be able to meet the experience and training requirements of the designated job class at the completion of the development program. PREFERRED QUALIFICATIONS Professional experience or academic coursework in the principles and practices of air pollution control; Professional experience or academic coursework in the interpretation, application, and enforcement of air pollution control statutes, regulations, and permits; Professional experience or completion of a bachelor's degree or higher in an engineering discipline, or atmospheric science discipline; Experience gathering, organizing, synthesizing, analyzing, and presenting data sets utilizing mapping applications; Experience communicating technical, regulatory, and policy information pertaining to the air quality field to audiences verbally and in writing; Experience installing, operating, calibrating, repairing, or maintaining air pollution monitoring equipment; Experience reading and interpreting schematics, diagrams, and service manuals. Conclusion AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities. ACKNOWLEDGEMENT As defined by Sec. 5-196 of the Connecticut General Statutes, a job class is a position or group of positions that share general characteristics and are categorized under a single title for administrative purposes. As such, a job class is not meant to be all-inclusive of every task and/or responsibility.

AI + Elite Basketball | Summer 2025 Duration: ~8 weeks (June 16 ~ Aug 11) Onsite (Putnam, CT), with housing & meals supported through PSA's campus Type: Unpaid internship, with potential path into a deeper role beyond summer Open to candidates with CPT, OPT, and H-1B About Us This internship is hosted by PAI (Precision Athletics Intelligence), a new AI athletic program by Putnam Science Academy (PSA) - one of the most elite basketball-focused high schools in the U.S. PSA has won 5 National Prep School Basketball Championships, in 8 years, most recently in March 2025 The school's mission is to deliver world-class private high school education while developing players for NCAA and NBA levels PAI is built to bring AI into high-performance sports and education, starting with this summer MVP project This is PAI's first technical initiative, aiming to create a foundational performance analysis platform for PSA's nationally ranked basketball program - with high visibility and real-world application from day one. What You'll Build You'll join a small, focused team building an end-to-end system to: Automatically analyze practice footage Detect key actions (shooting, movement, defensive effort) Deliver structured feedback to coaches and players within minutes This product is aiming China Market and it will serve elite athletes and coaching staff immediately, with long-term potential to scale across teams and domains. Your Role As an ML intern, you'll work on the core computer vision pipelines that power the system. Responsibilities Use or fine-tune models like YOLOv8, OpenPose, or MediaPipe Build pipelines to extract training insights from video Process raw frames into structured data (e.g. player tracking, shot detection) Evaluate models on accuracy, reliability, and latency Deliver usable outputs via APIs to frontend/dev teams Write modular, reproducible code for experimentation and iteration What We're Looking For Core Skills Strong Python skills; comfortable with Jupyter, scripting, and code structure Experience with PyTorch or TensorFlow - or fast learning capability Comfortable using OpenCV and working with image/video data Familiar with Git and collaborative development environments Fluent spoken Chinese (Mandarin) Mindset We're looking for someone who: Has real confidence in their ability to learn fast and figure things out independently Can take vague or high-level product goals, and turn them into working code Works through ambiguity with speed, structure, and clarity Cares about doing real work that gets used - not just academic experiments Is genuinely interested in basketball and understands the game at a basic level Thrives in a builder-style environment with ownership, speed, and open problems Bonus (Not Required) Projects involving video analysis, pose estimation, or CV pipelines Experience with DeepSORT, sports heatmaps, or action recognition Familiarity with serving models via FastAPI, Flask, or REST endpoints Background as a player, coach, or data analyst in sports Who Can Apply We welcome candidates from a variety of backgrounds: Undergraduates (junior/senior preferred) with strong project experience Master's students in CS, AI, or related fields PhD students focused on applied machine learning Self-taught engineers - if you've built real things, we want to see them We value your ability to build and think clearly over your academic label. Why This Matters This is not a typical early-stage internship. While our tech team is just starting out, our platform isn't. You'll be building within a system that already has: A championship-level basketball program Immediate real-world users: athletes and coaches with daily training needs A founder with full access to decision-making, facilities, and execution A high-trust environment where things move fast, and feedback is real In many ways, PSA provides what most startups seek after Y Combinator: A live environment, institutional support, immediate demand, and the room to build and scale. If you have: Strong learning ability Clear technical thinking Ambition to turn huge ideas into real systems …and you're excited by sports, education, AI, and building things from scratch - you'll thrive here.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: We are currently seeking a Water Engineer Co-Op or Intern to join our Water Business Line in our Wakefield, MA office in Summer 2026. We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, we're feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which we're seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent. We are here to protect our natural environment and water resources, while powering our world for future generations. Role accountabilities: As a Water Engineer Co-Op/Intern, you will have the opportunity to gain valuable hands-on experience in various aspects of water engineering projects. Your role will involve evaluating, planning, designing, and supporting the management of projects related to water/wastewater/stormwater treatment and conveyance, including pipelines and pumping facilities. You will also be involved in assessing, developing, and supporting the management of sustainability and resilience projects, which include vulnerability and mitigation assessments, as well as planning and design for utilities, municipalities, and cities. Fieldwork activities will be an integral part of your experience, where you will have the chance to conduct site visits, perform sampling, conduct water quality analyses, evaluate technologies, gather plant operations information, troubleshoot processes, and optimize systems. Additionally, you will have the opportunity to support Asset Management projects by performing data analytics, operational and organizational assessments, condition assessments, and overall performance evaluations of water/wastewater/stormwater facilities. In addition, you will be responsible for the following: * Support preparation of reports, presentations, and other audio-visual materials, and participate in client meetings. * Ensure project compliance with all Arcadis practices and quality, health and safety standards, and facilitate coordination for timely completion and submission of projects on time and budget. * Work independently and as part of a team, with the flexibility to accommodate collaboration with team members across the U.S. and internationally. * Learn and use digital tools to enhance customer experience, team and client collaboration, and project delivery including configuration and deployment of SharePoint, Building Information Modeling (BIM), Power BI, and Augmented Reality. What skills do you need? * Strong attention to detail, organization skills, and work ethic * The initiative and ability to take on new projects and other challenges regularly. * Excellent communication skills, both written and verbal. * Self-motivated, team-oriented and flexible, with the ability to balance and address new challenges as they arise * Exceptional analytical and problem-solving skills. * Knowledge of engineering concepts, theories, and practices related to water/wastewater/stormwater. * Proficient in Microsoft Office Excel, Word, and PowerPoint. Qualifications & Experience: Required Qualifications: * Pursuing a BS in Civil, Environmental, or Water Resources Engineering, or another closely related academic discipline. Preferred Qualifications: * Prior internship or coursework in water/wastewater, water resources, or related sectors. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for part-time, as needed positions. These benefits include EAP, 401K, and optional well being benefits. The salary range for this position is $22.20 - $33.30 per hour. #LI-TB1 #EarlyCareersANA #Resilience-ANA #WATER-ANA #LI-HYBRID #SWE #WEPAN #AWIS #INWES #BWEC #NSBE #SHPE #AISES #oSTEM #SAME #SASE

Country: United States of America Job Title Mechanical Engineering Intern Otis is the world's leading company for elevator, escalator manufacturing, installation and service. We are seeking a motivated and hands-on Mechanical Engineering intern to join our team at Farmington, CT lead design center. This internship offers you an opportunity to gain practical experience and develop your skills in a collaborative learning environment, under the mentorship of our senior mechanical engineers. During your internship you will be an integral part of a team that solves real problems. On a typical day you will: Create Creo 3D Modeling Software effectively to support engineering tasks while following established internal procedures and compliance requirements. Assist in the design, development, and testing of mechanical components and system designs Collaborate with engineers on planning and execution Prepare technical presentations related to your project or participate in design reviews Collaborate with other Otis interns. What You Will Need to be Successful: Currently pursuing a bachelor's degree in mechanical engineering Passion for Mechanical Engineering, mechanical design or system integration and testing Experience with 3D CAD software with an understanding of and adherence to company-specific engineering processes and standards. Be able to apply mechanical engineering theories and analytical methods to perform modeling, simulation, and analyses of mechanical components and systems. Work collaboratively in a team environment Excellent problem-solving and attention to detail skills Effective communication skills, both written and verbal If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2 billion people every day and maintain approximately 2.2 million customer units worldwide, the industry's largest Service portfolio. You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 69,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company. When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge. We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs. Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here. Become a part of the Otis team and help us #Buildwhatsnext! Otis is An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other protected class according to applicable law. To request an accommodation in completing an employment application due to a special need or a disability, please contact us at ****************. Privacy Policy and Terms: Click on this link to read the Policy and Terms

At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil, 'all, Loctite, Snuggle, and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. Dare to learn new skills, advance in your career and make an impact at Henkel. What you´ll do * Get hands-on lab experience testing various adhesive chemistries * Support customer adhesive applications and project work * Provide technical support, perform research, and report on adhesive and dispensing equipment performance * Work independently and collaboratively on lab-based projects * Act as a technical liaison with customers, sales, marketing, manufacturing, and R&D teams * Gain experience in adhesive testing, statistical analysis, and project management What makes you a good fit * An undergraduate student graduating in 2027 or 2028 pursuing a degree in Chemical Engineering, Mechanical Engineering, Industrial Engineering, Packaging Engineering or Electrical Engineering * Strong problem-solving and project management abilities * Effective communication and presentation skills * Hands-on lab experience from coursework or previous internship Some perks of joining Henkel * Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide * Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses * Networking events with Henkel business leaders, experts and sustainability ambassadors * Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals * In-person and virtual social events to connect with other Henkel interns across the country Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. Additional information * This internship is eligible for a housing stipend or relocation support * Henkel's Summer 2026 internship program starts on May 27th, 2026, and runs through mid-August * Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled * If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team * If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. JOB ID: req75187 Job Locations: United States, CT, Rocky Hill, CT Contact information for application-related questions: ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. Application Deadline: As long as the vacancy is listed on our Career Site, we are happy to receive your application Job-Center: If you have an application already, you can create or log in to your account here to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. Accept for all YouTube content LOAD EXTERNAL CONTENT Deactivate loading external content from YouTube. How is work at Henkel About Henkel Building on a strong legacy of almost 150 years, we are leading the way to reimagine and improve life every day. Today and for generations to come. Through our innovative and sustainable brands and technologies, across our teams around the world. Henkel holds leading positions in both industrial and consumer businesses: Our portfolio includes well-known hair care products, laundry detergents, fabric softeners as well as adhesives, sealants, and functional coatings.

The Business Engineering intern will work within the Business Engineering team who support the Directors of Assembly & Test, Optics Fabrication, Engineering and Factory Logistics. Your Assignment: Business engineers help unlock critical data and information, drive analyses and insights, set up reporting and dashboards, derive improvement plans and key messages. Typical areas for investigation are: Production norms and labor hour studies. Resource capacity and efficiency. Move rate capability and constraints. Cycle time and blueprints. Time studies Data analytics In this role, you will be able to further develop your analytical skills, business perspective, influencing skills, presenting techniques and project management capabilities. Your Profile: Pursuing a Bachelor or Master of Science in Industrial Engineering, Data Analytics, Business Administration, or General Engineering. Experience minimum 3 years of school completed by the start of the internship Masters preferred Experienced with IT-systems in the area of production-control (Excel, SAP, SAP ME/ BO, SAP HANA, Spotfire, Tableau, Power BI) preferred. Ambitious, enthusiastic and with a pro-active, initiating attitude. Strong analytic capability: able to create transparency, set up structures, think in processes, work accurately. Self-assured, capable of convincing people, also at higher management levels. Strong communication and presentation skills. Collaborative and constructive attitude with some business acumen. Ability to convert complex (often data driven) matter to clear overviews and insights. One previous internship that was either project or data based preferred Personal skills Can observe and respond to people and situations and interact with others encountered in the course of work. Can learn, adapt, and apply new information or skills. Must be able to read and interpret data, information, and documents. Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism. Ability to complete assignments with attention to detail and high degree of accuracy. Proven ability to perform effectively in a demanding environment with changing workloads and deadlines. Result driven-demonstrate ownership and accountability. Identifies bottlenecks and drives improvements. Work independently or as part of a team and follow through on assignments with minimal supervision. Demonstrate open, clear, concise and professional communication. Ability to establish and maintain cooperative working relationships with manager, co-workers and customer. Work according to a strict set of procedures within the provided timelines. Other Information This position is located on-site in Wilton, CT. It requires onsite presence to attend in-person work-related events, training courses and meetings and to further ensure teamwork, collaboration, and innovation. Role within Office Responsibilities Routinely required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the campus. Occasionally lift and/or move up to 20 pounds. May require travel (specify domestic and/or international) dependent on business needs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

At Ensign-Bickford Aerospace & Defense Company (EBAD), we believe that our strengths are built on our most important resource - our people. Join EBAD and you'll be a part of a team who creates cutting edge technology that will blast us into the future. No other company can match the innovative energetic solutions that we provide. At EBAD you will actively contribute to successful missions putting men, women and satellites into space, and protecting our armed service men and women around the world. If this is the culture and work environment you are seeking, then EBAD is the place for you! Job Description Ensign-Bickford Aerospace and Defense Company is seeking talented college students to join our 2026 summer internship program. Our 12-week internship program is designed to provide real-world and hands-on experience in areas that interest you! As an intern, you will collaborate with industry experts to solve real-world challenges and change the way we do business. Product Engineer Interns will work within our Electronics Operations in support of all aspects of product engineering including, but not limited to: Continuous improvement Development of Standard Work packages Lean cell conversion and statistical process control implementation Manufacturing cell design new product development Responsibilities/daily duties: Assist in solving manufacturing problems, investigating process failures, and implementing corrective actions Assist in the Implementation of Lean methodologies including standard work, point of use tooling, material presentation, and process improvements. Interface with production personnel including operators, quality inspectors, and shop floor supervisors. Requirements: Candidate pursuing an undergraduate degree in an engineering discipline Strong Microsoft Office Skills Experience with CAD and hands-on experience using manufacturing tools preferred As an EBI intern, you will: Work on robust projects that prepare you for a full-time opportunity after graduation Solve real-world challenges alongside industry experts Receive competitive pay for your contributions Showcase your project outcomes to leadership at the end of the summer Participate in career discussions Socialize through teambuilding and networking events Learn more about career opportunities across our businesses Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Mechanical Engineering Intern 2026Summer Intern Program Location: Hamden, CT Amphenol Spectra-Strip is enabling the electronics revolution with wire and cable solutions. We are the market leader for products that power the internet, cloud compute and artificial intelligence. We make components that run at 224Gbps per lane and can download 100 full length HD movies in a single second. Amphenol is a great place with outstanding engineers working on the fastest signals, with all the software and equipment needed to be successful. We are currently seeking a Product Development Engineer to join our team to lead product innovation in design, validation, and launch phases. RESPONSIBILITIES: This role supports our Mechanical Engineering group. You will work closely with internal engineers and manufacturing personnel, supporting the development and validation of product prototypes through polit production. This position also works within the production area, creating and testing designs. What you'll do: Gain Experience! Support the product design effort through analysis, testing, and deployment Generating detailed technical drawings Gather test data to support R&D activities Support production with fixture designs Identify process deficiencies and help develop solutions to improve those deficiencies QUALIFICATIONS: A good candidate should be at least a sophomore in a Mechanical Engineering program Experience with solid modeling tools (SolidWorks) Ability to communicate with technical & non-technical people Ability to work in team environment Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at ****************************

Department Engineering Employment Type Internship Location New Haven, CT Workplace type Hybrid Compensation $25.00 / hour Key Responsibilities Skills, Knowledge and Expertise Why You'll Love Working with Us About Fuss & O'Neill Fuss & O'Neill is a civil and environmental engineering firm that provides client-specific, forward-thinking, and holistic solutions. Since 1924, we have made it our mission to improve the built and natural environments in response to our public and private clients' evolving needs.

This role is with Medtronic. Medtronic uses RippleMatch to find top talent. At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You'll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. A Day in the Life Careers That Change Lives The possibilities at the intersection of medicine and technology are endless, which means endless opportunities to make your mark on the world. Our interns do real work within experienced engineering teams to improve lives of millions. Engineering roles in the Software engineering group can include Software, AI/Data Science, Software Cloud, Software Quality, Software Development Operations, Software Systems, Software Test, and Firmware engineers. Examples of work in each of these areas are listed below. Software Engineer Designs, develops, tests, debugs and implements operating systems components, software tools and utilities. Determines systems software design requirements. Software Cloud Engineer Supports development and execution of the organization's cloud strategy from a technical perspective, including design, planning, integration, maintenance and support of cloud architecture. Works with stakeholders across the organization to evaluate cloud systems and identify appropriate solutions. Software Quality Engineer Develops, modifies, applies, and maintains standards for software systems quality operating methods, processes, and procedures. Conducts evaluation of software systems activities including requirements, design, development, documentation, integration, test, verification and validation. Software Development Operations Engineer Introduces and maintains processes, tools, and methodologies to balance needs throughout the software development life cycle. Conducting requirements gathering and analysis to understand the domain of the software problem and/or functionality, the interfaces between hardware and software, and the overall software characteristics. Software Systems Engineer Develops software and tools in support of design, infrastructure, and technology platforms, including operating systems, cloud-based and Internet-related tools. Designs, develops, troubleshoots, and debugs software programs for enhancements and maximize new products. Software Test Engineer Tests the functionality and performance of software applications or systems software. Develops and executes test plans and scripts designed to detect problems in software applications and systems software. AI/Data Science Engineer In new product design roles: develops and programs integrated software algorithms to structure, analyze and leverage data in product and systems applications in both structured and unstructured environments. Develops and communicates descriptive, diagnostic, predictive and prescriptive insights/algorithm Our summer internships are full-time (40 hours/week), paid positions lasting 10-11 weeks. We offer competitive compensation, along with educational and social programming throughout the summer. For interns relocating more than 50 miles from home or school, we provide housing assistance and a relocation and transportation stipend. At Medtronic, we bring bold ideas forward with speed and decisiveness to put patients first in everything we do. In-person exchanges are invaluable to our work. We're working a minimum of 4 days a week onsite as part of our commitment to fostering a culture of professional growth and cross-functional collaboration as we work together to engineer the extraordinary. The majority of our internship positions are based at our primary hubs in Minnesota, California, Colorado, and the Northeastern U.S. (Connecticut & Massachusetts). We also offer opportunities in other states, including Arizona, Florida, Michigan, Tennessee, and Texas. Candidate location preferences are strongly considered during the interview and offer process; however, flexibility increases the number of potential opportunities available. All interns must reside in the U.S. for the duration of the internship. Must Haves: To be considered for a Summer 2026 engineering internship, you must meet the following basic requirements. Your resume must clearly demonstrate how you meet each of these criteria to be considered for a position. Working towards a bachelor's or master's degree in computer or software engineering, computer science or related engineering major with an anticipated graduation date of Winter 2026, Spring 2027, Winter 2027 or Spring 2028 The ability to participate full time (40 hours/week) as part of our intern cohort from June 1 - August 14 (semester system programs) or June 15 - August 21 (quarter system programs) Legally authorized to work in the U.S. on a full-time basis and do not require sponsorship in the future for an employment visa. The Medtronic Summer Internship Program does not provide work authorization sponsorship for summer intern positions. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for the Medtronic Summer Internship Program Nice to Haves: A minimum 3.0 out of a 4.0 cumulative GPA Flexibility in geographic location Knowledge of one or more of the following technologies: C, C++, C#/.NET, SQL, JavaScript, Java, Swift, HTML/CSS, Microsoft Visual Studio, Jenkins, Gitlab Prior work on projects in a team environment Relevant academic project, internship, or lab experience Experience in statistics and data analysis and/or Design for Reliability and Manufacturability (DRM) Technical writing skills Strong written and verbal communication skills who is self-motivated, proactive, and willing to learn Physical Job Requirements The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. For Office Roles: While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer, and communicate with peers and co-workers. Contact your manager or local HR to understand the Work Conditions and Physical requirements that may be specific to each role. Benefits & Compensation Medtronic offers a competitive Salary and flexible Benefits Package A commitment to our employees lives at the core of our values. We recognize their contributions. They share in the success they help to create. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every career and life stage. Salary ranges for U.S (excl. PR) locations (USD):$55,120 - $94,120 The base salary range is used nationally in the United States, excluding Puerto Rico. The Medtronic Internship Program offers an hourly rate of pay that falls within the range of $29.00 to $33.25 per hour. The hourly rate offered will be determined by the position and is subject to variation based on the number of years of school completed. The following benefits and additional compensation are available to those regular employees who work 20+ hours per week: Health, Dental and vision insurance, Health Savings Account, Healthcare Flexible Spending Account, Life insurance, Long-term disability leave, Dependent daycare spending account, Tuition assistance/reimbursement, and Simple Steps (global well-being program). The following benefits and additional compensation are available to all regular employees: Incentive plans, 401(k) plan plus employer contribution and match, Short-term disability, Paid time off, Paid holidays, Employee Stock Purchase Plan, Employee Assistance Program, Non-qualified Retirement Plan Supplement (subject to IRS earning minimums), and Capital Accumulation Plan (available to Vice Presidents and above, or subject to IRS earning minimums). Regular employees are those who are not temporary, such as interns. Temporary employees are eligible for paid sick time, as required under applicable state law, and the Employee Stock Purchase Plan. Please note some of the above benefits may not apply to workers in Puerto Rico. Further details are available at the link below: Medtronic benefits and compensation plans About Medtronic We lead global healthcare technology and boldly attack the most challenging health problems facing humanity by searching out and finding solutions. Our Mission - to alleviate pain, restore health, and extend life - unites a global team of 95,000+ passionate people. We are engineers at heart- putting ambitious ideas to work to generate real solutions for real people. From the R&D lab, to the factory floor, to the conference room, every one of us experiments, creates, builds, improves and solves. We have the talent, diverse perspectives, and guts to engineer the extraordinary. Learn more about our business, mission, and our commitment to diversity here. It is the policy of Medtronic to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, Medtronic will provide reasonable accommodations for qualified individuals with disabilities. If you are applying to perform work for Medtronic, Inc. (“Medtronic”) in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here a list of all material job duties of the specific job position which Medtronic reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Medtronic will consider for employment qualified job applicants with arrest or conviction records in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: Internships are designed to help build your professional credentials by providing meaningful, practical, on-the-job training and experiences, while also igniting your imagination. TTM offers internships to qualified Engineering students who are looking to gain professional experience in the field of engineering and manufacturing technology. Opportunities exist throughout our company and are available to students who are motivated to learn and grow. You will get a chance to contribute your best ideas and work in an environment that inspires innovative results. Students in our internship program provide tremendous value to our organization through increased productivity, introduction of innovative, fresh ideas and talent, and often become reliable and skilled permanent employees. The TTM Engineering Internship Program is geared toward conscientious Engineering students. It is a stimulating and rewarding experience, helping the student make the transition from school to work and career while motivating the student for a potential manufacturing, engineering and technology future. Participating in one of our internships is also invaluable in establishing a network within the company. Selected candidates will work at either the Stafford or Stafford Springs locations. Essential Knowledge and Skills: * A basic understanding and strong interest in analog and digital electronics and/or microwave theory. * Interest in software development and exposure to a programming language. * Interest in test and process automation. * Comfortable with hands-on work (manual trial testing, soldering, fixture assembly). * Strong interpersonal skills. * Strong time management skills. * Strong analytical ability and exceptional attention to detail. * Strong computer skills, specifically Microsoft Office. * Actively pursues opportunities to expand job-related knowledge. * Strong written and verbal communication skills. Education and Experience: * The student must be enrolled in an accredited college or university technical undergraduate program * Junior going into their Senior year of college, scheduled to graduate by December 2027 at the latest. * Student must also be in good academic standing. * Demonstrated technical ability and aptitude to develop and work on engineering projects. Program Outline: * Each intern will be an integral part of an engineering team by having the opportunity to work on at least one major development or production program. * To help guide and serve as a resource, a manager and a mentor/champion will be assigned to each intern. * Interns will present a final presentation to the site leadership team. * The program offers additional opportunities for professional, career and leadership development through training and team building events. #LI-PG1 Compensation: Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: Internships are designed to help build your professional credentials by providing meaningful, practical, on-the-job training and experiences, while also igniting your imagination. TTM offers internships to qualified Engineering students who are looking to gain professional experience in the field of engineering and manufacturing technology. Opportunities exist throughout our company and are available to students who are motivated to learn and grow. You will get a chance to contribute your best ideas and work in an environment that inspires innovative results. Students in our internship program provide tremendous value to our organization through increased productivity, introduction of innovative, fresh ideas and talent, and often become reliable and skilled permanent employees. The TTM Engineering Internship Program is geared toward conscientious Engineering students. It is a stimulating and rewarding experience, helping the student make the transition from school to work and career while motivating the student for a potential manufacturing, engineering and technology future. Participating in one of our internships is also invaluable in establishing a network within the company. Selected candidates will work at either the Stafford or Stafford Springs locations. Essential Knowledge and Skills: A basic understanding and strong interest in analog and digital electronics and/or microwave theory. Interest in software development and exposure to a programming language. Interest in test and process automation. Comfortable with hands-on work (manual trial testing, soldering, fixture assembly). Strong interpersonal skills. Strong time management skills. Strong analytical ability and exceptional attention to detail. Strong computer skills, specifically Microsoft Office. Actively pursues opportunities to expand job-related knowledge. Strong written and verbal communication skills. Education and Experience: The student must be enrolled in an accredited college or university technical undergraduate program Junior going into their Senior year of college, scheduled to graduate by December 2027 at the latest. Student must also be in good academic standing. Demonstrated technical ability and aptitude to develop and work on engineering projects. Program Outline : Each intern will be an integral part of an engineering team by having the opportunity to work on at least one major development or production program. To help guide and serve as a resource, a manager and a mentor/champion will be assigned to each intern. Interns will present a final presentation to the site leadership team. The program offers additional opportunities for professional, career and leadership development through training and team building events. #LI-PG1 Compensation: Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Chapter Leader-Solution Engineering Breakers and Control Products As an intern, you will have the opportunity to gain practical experience through various projects. Each day, you will acquire knowledge by performing tasks as directed. You will also showcase your skills by supporting ABB's operations and enhancing personal education/employment opportunities. The work model for the role is onsite/hybrid in Bloomfield, CT. You will be mainly accountable for: Collaborating with various teams to support ABB's operations, ensuring effective coordination and timely project completion within the defined timelines. Leveraging insights about customer needs and ABB's offerings to identify suitable solutions for clients, leading to project results that meet customer expectations. Participating in team meetings, brainstorming sessions, and other collaborative efforts. Seeking feedback and guidance from the manager and team members to improve performance and skills. Support product design and development through 2D/3D modeling, prototyping, testing, and manufacturing integration using tools like PTC Creo and Windchill Assist in executing technical design plans and documenting results to meet performance, cost, and safety standards using Design for Six Sigma and Design for Reliability principles Qualifications for the role: Currently enrolled in a bachelor's or master's degree program in Mechanical Engineering in the United States. Intern must have reliable transportation to and from the worksite. Must be legally authorized to work in the United States without company sponsorship now and in the future. Utilize critical thinking skills to analyze complex situations and develop strategic solutions. Effectively organize and prioritize tasks to meet deadlines. Exhibit the capability to manage several tasks at once while maintaining high standards of quality. Collaborate with team members to convey ideas, share information, and provide updates on project progress. Why ABB? What's in it for you We want you to bring your full self to work-your ideas, your energy, your ambition. You'll have the tools and freedom to grow your skills, shape your path, and take on challenges that matter. Here, your work creates impact you can see and feel, every day. ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. Internships at ABB within the United States are not eligible for company-sponsored medical benefits, 401(k) contributions, or paid time off. The hourly rate is determined by things such as the successful applicant's qualifications, graduation year and experience. This position is expected to pay between $20 - $34 per hour. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Ready to turn your classroom knowledge into real impact? Join our team in Cheshire, CT, and work alongside experienced engineers who are shaping the future of resilient water infrastructure across New England! This internship offers candidates the opportunity to work on a wide range of water-resource-related projects, including stream and river restoration, bank erosion monitoring, turbidity reduction, flood mitigation, geomorphic assessment, and design of culverts to accommodate aquatic organism passage. We are SLR Consulting (US), a 500+ coast-to-coast team of advisory, environmental/engineering, and regulatory professionals. We deliver environmental and sustainability services to our clients through the integration of over 30 advisory, technical environmental, and engineering disciplines to help clients address some of their most complex challenges around sustainability. We are Making Sustainability Happen. As our new Water Resource Engineer Intern, you will play an important role on a team whose work is essential to achieving this goal. Responsibilities: Support the planning, analysis, and design of water resources and stormwater projects, including hydraulic/hydrologic modeling, watershed studies, flood mitigation, green infrastructure, and stream restoration. Assist with data collection, GIS mapping, field evaluations, and construction observation. Work with engineering teams to prepare drawings, technical reports, and project documentation. Contribute to innovative, sustainable solutions that protect communities and improve water quality. Working @ SLR With us, there is no doubt you'll grow your subject-matter expertise and industry knowledge. We care about investing in our employees for the long-run, and if you ask our team, they'll tell you that's just one of the many benefits of working here. We want to be a place where you can experience career growth and satisfaction for many years. Here's what else you'll enjoy as part of our team: SLR offers internships to help students get practical work experience in their chosen field. The internship is a temporary, seasonal position beginning in May through August 2026. The hourly range for this position is $20- $25. Final agreed upon compensation will be commensurate with individual education, professional designation, experience, internal parity, and location. This is a non-benefits eligible position. Qualifications/Education/Memberships: Pursuing a B.S. or M.S. in Civil Engineering, Environmental Engineering, Water Resources, or a related discipline. Coursework or interest in hydrology/hydraulics, stormwater management, or environmental systems. Experience with GIS, Civil3D, HEC-RAS, HEC-HMS, or similar tools a plus. Strong communication skills, eagerness to learn, and a collaborative mindset. Valid driver's license and ability to support field work as needed. Proficient with Microsoft Office Suite of software. Diversity, equity, and inclusion (DE&I) are at the core of who we are and want to be. SLR is proud to be an Equal Employment Opportunity / Affirmative Action Employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, gender, sexual orientation, civil union status, age, citizenship, marital status, disability, gender identity or expression, genetic information, or veteran status. At SLR, we embrace diverse cultures, perspectives, skills, and experiences within and outside our organization. We respect and celebrate differences and want to ensure that we continuously strive to build a place where everyone feels included and is encouraged to be their authentic self. We are committed to these values, and our SLR Culture & Diversity Team works to actively promote diversity, equity, and inclusion across our people and talent processes, operations, and client work around the world. If you have a disability and need reasonable accommodations at any point in the application or interview process, please contact us at careers-us@slrconsulting.

Own your future as an intern at Ecolab! Our internship program provides you with invaluable insights from leaders across Ecolab, engaging and challenging projects, opportunities for personal and professional growth, extensive networking, and the chance to immerse yourself in our innovative and dynamic environment. Ecolab is seeking Engineering Technical Sales Interns to join our summer 2026 technical sales internship program. You will help identify and propose solutions to preserve energy and water, minimize our customers' environmental footprint and increase productivity. You will combine a traditional engineering approach with a consultative sales approach focused on strong account leadership skills and retention of strategic accounts. You will also learn how to build long-term relationships with a large customer base by understanding their key business drivers, providing strategic resolution through hands-on problem solving, and offering new digital technology solutions. What's in it For You: * The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food and healthy environments * The ability to make an impact and shape your career with a company that is passionate about growth * The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best * Apply what you learn in the classroom to meaningful projects that have genuine business impact * Finish your internship with a realistic job preview of what a "day in the life" of an Ecolab associate looks like * Be considered for a full-time job offer (to start upon graduation) at the end of a successful internship into an Associate District Representative role. What You Will Do: * Complete an independent project(s) under primary trainer's direction to yield calculated ROI * Complete safety training & technical lessons that serve as an introduction to water treatment applications * Observe and participate in service as it is provided to customers to assure accurate chemical application, process optimization and documentation * Complete introductory training of the consultative sales approach * Visit multiple customer sites across the region (40-100% of training time spent in field) to learn best practices and types of unit applications and treatment approaches * Build key relationships and interaction with departments and personnel that will be critical to success in the field * Work within various regional sales districts and customer locations to build specific technical knowledge and gain sales experience while helping customers achieve their sustainability goals. * Provide routine service support to Sales Representative. May be subject to testing includes Boilers, Cooling towers, Closed loops, R.O. and filtration. Position Details: * 11-week paid internship program, starting on Monday, June 1st * Willing to relocate within the United States. Nationwide locations available * Relocation assistance may be available * Opportunity for a hybrid work environment, balancing field days with working remotely Minimum Qualifications: * Pursuing undergraduate degree in Engineering (Chemical, Mechanical, Environmental, Industrial) graduating in December 2026 or Summer 2027 * Immigration sponsorship not available for this role * 11-week paid internship program, starting on Monday, June 1st * Position requires a valid US Driver's License and acceptable motor vehicle record and access to a personal vehicle Physical Demands: * Position requires lifting/pushing/carrying up to 50 pounds chest high About Ecolab A trusted partner at nearly three million customer locations spanning over 170 countries, Ecolab is the global leader in water, hygiene and infection prevention solutions and services. Our team delivers comprehensive solutions, data-driven insights and personalized service to advance food safety, maintain clean and safe environments, optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, hospitality and industrial markets. When you come to work at Ecolab, you get to take on some of the world's most meaningful challenges and have the opportunity to learn and grow, shape your career, make an impact and quickly see the importance of your work. Annual or Hourly Compensation Range: $23.00 - $25.00 per hour. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: * Undergo additional background screens and/or drug/alcohol testing for customer credentialing. * Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

**Who Are We?** Taking care of our customers, our communities and each other. That's the Travelers Promise. By honoring this commitment, we have maintained our reputation as one of the best property casualty insurers in the industry for over 170 years. Join us to discover a culture that is rooted in innovation and thrives on collaboration. Imagine loving what you do and where you do it. **Job Category** Technology **Compensation Overview** The annual base salary range provided for this position is a nationwide market range and represents a broad range of salaries for this role across the country. The actual salary for this position will be determined by a number of factors, including the scope, complexity and location of the role; the skills, education, training, credentials and experience of the candidate; and other conditions of employment. As part of our comprehensive compensation and benefits program, employees are also eligible for performance-based cash incentive awards. **Salary Range** $94,400.00 - $155,800.00 **Target Openings** 1 **What Is the Opportunity?** Travelers is seeking an Technology Engineer I to join our organization as we grow and transform our Enterprise Technology Solutions organization. Our Technology Engineers serve as the critical bridge between infrastructure foundations and application development, specializing in the design, configuration, and management of enterprise platforms that enable scalable business capabilities. As the essential connective layer between infrastructure and software engineering teams, Technology Engineers collaborate across the technology stack to optimize workflows, resolve critical platform challenges, and ensure seamless integration. This role directly impacts development velocity, system interoperability, and the organization's ability to rapidly deploy and scale business applications across the enterprise technology landscape. From entry-level platform support to strategic technical leadership, Technology Engineers progress through increasing levels of autonomy, technical complexity, and cross-functional influence, ultimately shaping the organizational direction of platform strategy and mentoring the next generation of platform engineering talent. Applicants must be authorized to work for ANY employer in the US. The company does not sponsor/support H-1B petitions, TN, or Forms I-983/STEM OPT, this this role. **What Will You Do?** + Responsible for performing analysis, design, implementation, and configuration of technology platforms and environments with a high degree of accuracy. **Technical Execution:** + Conduct assessment, development, deployment, and setup of moderately complex technology platforms and environments. + Design and implement CI/CD pipelines and DevOps workflows to support application deployment and operations. + Participate with team to perform analysis, assessment, and resolution for platform defects and incidents of intermediate complexity and escalate appropriately. + Configure, integrate, and maintain the platform/service layer where applications run, ensuring reliability and performance. + Document platform configurations, integration points, and operational procedures. + Collaborate with Software Engineers and Infrastructure Engineers to align application functionality with platform capabilities and infrastructure performance requirements. + Seek opportunities to expand technical knowledge and capabilities in platform engineering, CI/CD methodologies, and DevOps practices. + AI Learning: Familiarize with basic AI concepts and introductory tools, participating in foundational workshops and online courses. + Tech Utilization: Engage with emerging technologies through guided projects, focusing on hands-on experimentation and understanding practical applications. **Strategic Input:** + Work within guidelines set by team to independently tackle well-scoped platform engineering problems. + Define technical requirements for platform engineering assignments, including enterprise SaaS and PaaS solutions for application development and deployment. **Continuous Growth:** + Attend introductory seminars and webinars on AI, fostering an awareness of its impact on technology engineering. + Perform other duties as assigned. **What Will Our Ideal Candidate Have?** **Technical Expertise & Education:** + Three (3) years of technology engineering/platform management experience preferred. + Five (5) years experience with observability tools and their provisioning. Experience with the following tools is preferred: Elasticsearch (ELK), Datadog or Dynatrace + Domain Expertise - Demonstrated track record of enterprise platform expertise including the ability to understand SaaS/PaaS concepts necessary to do the job effectively, demonstrate willingness, cooperation, and concern for business issues, and possess in-depth knowledge of immediate technology platforms worked on. **Strong analytical and troubleshooting skills.** + Working knowledge of infrastructure technologies such as Cloud, Network, Database, Server, Storage etc. preferred. **Strategic & Business Acumen:** + Intermediate delivery skills including the ability to deliver technology work at a steady, predictable pace to achieve commitments, decompose platform assignments into small batch deployments, and contribute to enterprise architecture tradeoff and negotiation discussions + Proven problem-solving skills including enterprise system debugging abilities, allowing you to determine source of issues in unfamiliar platforms or integration points, ability to recognize and solve repetitive technology problems proactively and permanently, recognize mistakes using them as learning opportunities, and break down large technology problems into smaller, more manageable ones. **Leadership & Influence:** + Strong communication skills that enable clear, concise interactions with team members and stakeholders. The ability to speak to, and present monitoring solutions both verbally and written. Your ability to document technology work in an accessible manner, ask clarifying questions on requirements, and actively listen ensures seamless collaboration. You welcome constructive feedback and use it to continuously improve your approach to challenges. + You demonstrate intermediate leadership capabilities with a proven track record of self-motivation and initiative. Your ability to identify and pursue personal growth opportunities in database technologies shows your commitment to professional development and positions you to take on increasing responsibilities within our team. **What is a Must Have?** + Bachelor's degree in computer science, related STEM field, or its equivalent in work experience plus 2 years of technology or platform engineering experience. **What Is in It for You?** + **Health Insurance** : Employees and their eligible family members - including spouses, domestic partners, and children - are eligible for coverage from the first day of employment. + **Retirement:** Travelers matches your 401(k) contributions dollar-for-dollar up to your first 5% of eligible pay, subject to an annual maximum. If you have student loan debt, you can enroll in the Paying it Forward Savings Program. When you make a payment toward your student loan, Travelers will make an annual contribution into your 401(k) account. You are also eligible for a Pension Plan that is 100% funded by Travelers. + **Paid Time Off:** Start your career at Travelers with a minimum of 20 days Paid Time Off annually, plus nine paid company Holidays. + **Wellness Program:** The Travelers wellness program is comprised of tools, discounts and resources that empower you to achieve your wellness goals and caregiving needs. In addition, our mental health program provides access to free professional counseling services, health coaching and other resources to support your daily life needs. + **Volunteer Encouragement:** We have a deep commitment to the communities we serve and encourage our employees to get involved. Travelers has a Matching Gift and Volunteer Rewards program that enables you to give back to the charity of your choice. **Employment Practices** Travelers is an equal opportunity employer. We value the unique abilities and talents each individual brings to our organization and recognize that we benefit in numerous ways from our differences. In accordance with local law, candidates seeking employment in Colorado are not required to disclose dates of attendance at or graduation from educational institutions. If you are a candidate and have specific questions regarding the physical requirements of this role, please send us an email (*******************) so we may assist you. Travelers reserves the right to fill this position at a level above or below the level included in this posting. To learn more about our comprehensive benefit programs please visit ******************************************************** .

At Labcorp, we believe in the power of science to change lives. We are nearly 70,000 people across 100 countries who are harnessing science for human good. Our work combines unparalleled diagnostic laboratories, drug development capabilities and commercial innovations. Together, we fuel scientific breakthroughs and deliver more than 160 million medical test results that help guide treatment decisions, accelerate patient care and change lives. Join us in our pursuit of answers. Labcorp 2026 Global Internship Program Exciting Internship Opportunity - Software Engineer Intern in Bloomfield, Connecticut! Join Labcorp's 2026 Global Internship Program and take the first step toward a meaningful career in healthcare innovation! We're looking for motivated students to be part of a dynamic 12-week paid internship where you'll work on impactful projects and gain real-world experience, all while supporting our mission to improve health and improve lives. Internship 2026 Dates: May 18, 2026 - August 7, 2026 About the Program As a Labcorp intern, you'll be immersed in hands-on work that complements your academic background. In addition to your project work, you'll gain valuable exposure to Labcorp's global business, culture, and leadership through: Enterprise-wide learning experiences that introduce you to key business functions across Labcorp Leadership exposure and visibility, including direct interaction with senior leaders An immersive, in-person intern event June 2-4, 2026, designed to connect you with peers and deepen your understanding of our mission Senior leader speaker sessions offering insights into strategy, innovation, and career growth Continuous opportunities to connect and grow, from intern cohort communication channels and LinkedIn Learning resources to professional development sessions and storytelling opportunities that highlight your internship journey Connection to Labcorp's inclusive culture through engagement with our employee resource groups (ERGs)and values-driven community initiatives Dedicated mentoring connections to guide your growth, provide career advice, and support your internship journey Internship Details Duration: 12 weeks, full-time Dates of Internship: May 18, 2026 - August 7, 2026 Location: Bloomfield, Connecticut Compensation: Paid internship; relocation assistance available for qualified candidates Eligibility: Preferred candidates are rising juniors and seniors (Dec 2026 through June 2028 graduation) who are currently enrolled in a relevant degree program; however, all current students pursuing related studies are encouraged to apply. Why Labcorp? In 2025, we welcomed over 300 interns across our global offices. As part of the 2026 cohort, you'll join a diverse community of future leaders working to shape the future of diagnostics, biopharmaceutical lab services, corporate functions, and healthcare delivery. Ready to make a difference? Apply now to launch your career and create real impact for patients worldwide. #FutureofLabcorp About the Team: The Software Engineering Department at the Protedyne subsidiary of Labcorp develops smarter, faster robots to optimize efficiency in Labcorp's diagnostic testing laboratories across the world. The team is responsible for all levels of software management, from device firmware, industrial automation and robotics control through user interfaces, remote monitoring and database management. Internship Assignment Summary: Develop and support User Interface and User Interaction software for a complex laboratory automation system Develop and support application-level software for laboratory robots Perform testing software and provide feedback to the appropriate team Education/Qualifications/Skills: Working towards bachelor's degree in software engineering, electrical engineering or a related field Experience with an integrated software development environment (IDE) such as VS Code, Eclipse or IntelliJ Experience with a desktop programming language such as Java, C++ or Python or with a web development stack such as MEAN or WARN Embraces diverse perspectives through partnerships and teamwork This position is not eligible for visa sponsorship Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here. Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

Job Description LiquidPiston, Inc. is a disruptive engine company based in Bloomfield, CT, developing compact, efficient, and powerful rotary engines based on our patented thermodynamic cycle and innovative X-Engine architecture. Our engines are poised to revolutionize applications across aerospace, defense, commercial, and automotive sectors. Join our mission to transform propulsion and power generation technology. Location: Onsite in Bloomfield, CT. Will not consider remote. Internship Overview: We are seeking highly motivated and innovative Engineering Interns to join various teams within LiquidPiston. As an intern, you will have the opportunity to contribute to real-world engineering projects and gain hands-on experience in a fast-paced, R&D-focused environment. Opportunities are available in the following departments: Design Engineering Aerospace Systems Modeling & Simulation Testing & Validation Manufacturing / Machining Key Responsibilities (by department): 1. Design Engineering Support design and development of rotary engine components and subsystems using CAD tools (e.g., SolidWorks). Perform tolerance analyses, DFMA reviews, and assist in prototype fabrication. Collaborate with cross-functional teams on packaging, manufacturability, and integration challenges. 2. Aerospace Systems Contribute to propulsion system integration for UAVs and other aerospace platforms. Perform thermal and structural analyses under aerospace operating conditions. Assist in compliance documentation and system-level testing. 3. Modeling & Simulation Develop and run simulations for thermodynamic cycles and combustion analysis. Use MATLAB, Simulink, GT-Power, ANSYS, or other modeling tools to support performance prediction and optimization. Validate simulation results against experimental data. 4. Testing & Validation Support test setup, data acquisition, and instrumentation for engine and component testing. Analyze test data to identify trends, issues, and performance metrics. Assist with writing test plans, procedures, and reports. 5. Manufacturing Engineering / Machinist Operate and support CNC machining, manual lathe, and mill equipment for prototype and low-volume production. Assist in fixture design, tool selection, and machining process planning. Work closely with design engineers to evaluate manufacturability and implement design changes. Maintain precision, quality control, and safety standards during part fabrication. Gain hands-on experience with GD&T, CAM programming (e.g., Fusion 360 or Mastercam), and material selection. Qualifications: Currently pursuing a Bachelor's or Associate's degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or a related technical field. Technical trade school students will also be considered for machinist roles. Strong analytical and problem-solving skills. Experience with relevant tools depending on the department (e.g., SolidWorks, MATLAB, Python, LabVIEW, CNC equipment, CAM software). Excellent communication and teamwork abilities. Passion for innovation and technology development. Preferred Skills (not required, but a plus): Prior experience with internal combustion engines, power systems, or mechanical prototyping. Knowledge of thermodynamics, fluid dynamics, or heat transfer. Familiarity with electric drive systems, UAVs, or hybrid propulsion. Hands-on experience in a shop environment or with machining equipment. What You'll Gain: Hands-on experience working with cutting-edge engine technologies. Mentorship from experienced engineers and exposure to startup culture. Opportunity to work on high-impact projects in aerospace and defense. Practical manufacturing and prototyping skills in a real-world R&D environment. Potential pathway to full-time employment. Compensation: Approximately $3000-3850/month depending on the year in school. Our Culture At LiquidPiston, we challenge convention and solve hard problems. We move fast, think boldly, and iterate quickly. Our team thrives on collaboration, creativity, and resilience. We take calculated risks and believe that every setback is a steppingstone toward breakthrough innovation. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, or veteran status, and will not be discriminated against on the basis of disability. All offers of employment at LiquidPiston are contingent upon the successful completion of a pre-employment background check, drug screening and credit check. Powered by JazzHR 3S5uplCaQa

Purpose and Scope: Gain professional experience in a manufacturing setting. Required Skills, Education and Experience: • Pursuing a Bachelor's degree in Mechanical or Manufacturing Engineering • Excellent verbal and written communication skills • MS Office proficient • Experience with group work environments