Engineering internship jobs in South Whittier, CA - 521 jobs

Definition Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Essential Functions Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS:Incumbent must have the ability to: Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation. Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments. Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements. Provide public assistance at counter and over the telephone. Prepare quantity and cost estimates for engineering projects. Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes. Review engineering plans to determine appropriate layout of construction projects. Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades. Make and check mathematical calculations related to surveying, drafting and basic engineering. Maintain accurate survey records in the form of field notes and sketches. Participate in a variety of engineering design and planning work related to municipal engineering projects. Answer questions and provide information to the public concerning engineering activities. Assist in development and maintenance of the record keeping and filing systems. Prepare, assemble and distribute copies of maps, charts and blueprints. Answer questions and provide information to the public concerning engineering activities. Perform any other tasks or functions deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. Experience and Training Guidelines EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: Terminology, methods, practices and techniques of drafting. Trigonometry as applied to the computation of angles, areas, distances and traverses. Elementary surveying techniques and practices. Engineering maps and records. Ability to: Perform moderately complex engineering and mathematic calculations with speed and accuracy. Understand and follow written instructions and sketches. Use and care for drafting, surveying, and mechanical instruments and tools. Work independently in the absence of supervision. Experience: Engineering Technician II - Two years of increasingly responsible experience performing drafting and technical engineering work. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Please indicate how much experience you have in performing drafting and technical engineering work. No experience Less than one (1) year. One (1) year or more year(s) but less than two (2) years. Two (2) or more years but less than four (4) years. Four (4) or more years but less than six (6) years. Six (6) years or more but, less than eight (8) years. Required Question

The Digital Business Technology Infrastructure (DBT) Intern has the opportunity to work with and be mentored by technology specialists in conducting network and server operational tasks for Information Technology services for the enterprise. Day-to-day Responsibilities Assist with virtual server and IT networking day to day operations. Conduct inventory review for operational status of devices and services for technical expected states. Review Infrastructure monitoring tools and responding and documenting disruptions. Validate that Service level agreements (SLA) are in place and enforced for all devices in operations with the enterprise. Assists in educating, monitoring, and training personnel in safe work procedures Monitor on-prem data center floor. Inspect devices in various racks for any warning or outage related notifications for various devices. Works on assignments that are routine in nature, requiring limited judgment Receives detailed instructions on all work under close supervision Other duties as assigned Basic Qualifications (Preferred Skills & Experience) Currently enrolled and working on a 4-year degree in a related field (Information Technology, Computer Science.) 0 - 1 year of experience in a related field with experience working with technology related systems 3.0 GPA or higher preferred Other Qualifications & Desired Competencies Current certification in any of Microsoft, AWS, CompTia, ITIL preferred Demonstrates competency in researching and applying DBT compliance regulations to site operations Maintain a level of competence in DBT regulatory compliance Has effective problem-solving, analytical, interpersonal and communication skills Physical Demands Ability to work in an office and manufacturing environment (Constant) Able to climb ladders, stoop, kneel, twist, bend (Occasional) Ability to lift up to 50 pounds (Occasional) Ability to transition between sitting, standing, and walking for extended periods of time (Frequent) Clearance Level Clearance Level The salary range for this role is: $0 - $0 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Our Mission As humans, there are few things more exciting than meeting someone new. At Tinder, we're inspired by the challenge of keeping the magic of human connection alive. With tens of millions of users, hundreds of millions of downloads, 2+ billion swipes per day, 20+ million matches per day, and a presence in 190+ countries, our reach is expansive-and rapidly growing. We work together to solve complex problems. Behind the simplicity of every match, we think deeply about human relationships, behavioral science, network economics, AI and ML, online and real-world safety, cultural nuances, loneliness, love, sex, and more. Program DurationThe internship program will run from June 1 through August 28, 2026. Where you'll work This is a hybrid role that requires in-office collaboration three days per week in either Los Angeles or Palo Alto, California. About the Role As a Backend Engineer Intern at Tinder, you will partner directly with senior members of the engineering team and be empowered to contribute solutions to Tinder's backend system. We are deeply invested in improving architecture design, exploring and leveraging new technologies in interesting ways to deliver an app that continues to shape how people connect globally.What you'll do: Collaborate across Tinder Engineering on the expansion of our service platform. Develop and operate scalable and resilient distributed services that run on Amazon Web Services (AWS). Build large scale distributed systems that handle billions of data events a day. Write unit and integration tests. Access to cutting-edge Generative AI tools and the opportunity to apply them in real-world engineering work. What we're looking for: Aspiring backend developer who's excited to work on large scale challenges with cutting-edge technology. Proficiency in coding with at least one language (Java, Scala, Python,Typescript, Nodejs, etc.). Foundational knowledge of basic Computer Science principles: data structures and algorithms. Curiosity and creativity in leveraging Generative AI to reimagine feature building and development workflows. Currently pursuing a BS/BA, MS, or PhD in Computer Science or a related field. Nice to have: Prior internship or work experience on backend systems. Completed relevant project experience (i.e. hackathons, personal projects, GitHub, Open Source, volunteer coding experience etc.). Knowledge of technologies such as; Protocol Buffers, gRPC, Apache Kafka, Apache Flink, ElasticSearch, Redis. Aware of AWS technologies like; DynamoDB, S3, RDS, ElastiCache. $47 - $47 an hour The compensation range listed above is representative of the hourly rate offered. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary range is reflective of a position based in Los Angeles, and Palo Alto, California. This hourly rate will be subject to a geographic adjustment (according to a specific city, state, and country), if an authorization is granted to work outside of the location listed in this posting. Commitment to Inclusion At Tinder, we don't just accept difference, we celebrate it. We strive to build a workplace that reflects the rich diversity of our members around the world, and we value unique perspectives and backgrounds. Even if you don't meet all the listed qualifications, we invite you to apply and show us how your skills could transfer. Tinder is proud to be an equal opportunity workplace where we welcome people of all sexes, gender identities, races, ethnicities, disabilities, and other lived experiences. Learn more here: ******************************** If you require reasonable accommodation to complete a job application, pre-employment testing, or a job interview or to otherwise participate in the hiring process, please speak to your Talent Acquisition Partner directly. #Tinder We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Top SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is a space pioneer, supporting government, civil and commercial customers in solving their biggest challenges. Our forward-leaning, innovative spirit is backed by a legacy of expertise that began at the dawn of the space age. Our mission experience in space runs deep, we know our customers well, and our capabilities are unmatched. This is what allows us to provide reliable, agile and affordable space solutions to best serve our customers. From defending freedom to advancing human discovery, we are defining what is possible in space every day. An internship at Northrop Grumman is unique. Sure, you'll learn new skills, explore our enterprise, network with experts, connect with thought leaders, and finish with a resume that opens doors. But you'll gain something even more valuable: pride in what you've done. Join us and launch your career. We'll support you with training, employee resource groups, and our shared vision of global security. Northrop Grumman is seeking Guidance Navigation and Control Engineers for an internship opportunity. This position will be located at our Space sector in Redondo Beach, CA. The qualified candidate will become part of Northrop Grumman's Guidance Navigation and Control team within the Western Region Vehicle and Software Engineering Directorate. Roles and Responsibilities Derives guidance, navigation, and control system requirements from customer and mission needs. Collaborates across functional teams to perform trade studies supporting selected approaches. Provides subject matter expertise in the selection of hardware (sensors, actuators, processors) and development of algorithms (trackers, filters, controllers) to fulfill GNC requirements. Creates models and simulations of system attitude, ephemeris, and line-of-sight dynamics, knowledge, and control to support analysis, verification, and flight operations. Designs, develops, implements, verifies and tests algorithms and software and simulation tools to perform guidance, navigation and control of spacecraft during earth orbit, interplanetary cruise and orbital insertion, as well as during staging events. Engineers navigation functions including the statistical processing of measured data points and their substitution into algorithms simulating physical reality. Builds guidance functions including the formulation of specific equations to achieve a desired position, orientation or orbit in space. Implements control design and analysis processes consisting of the development of the control laws and hardware and software requirements for spacecraft. Basic Qualifications A candidate must meet ALL of the below criteria. The candidate must: Be a student who is enrolled full-time and pursuing an undergraduate or graduate degree from an accredited college/university and will be enrolled full time in Fall 2026 Be majoring in Mechanical Engineering, Aerospace Engineering, Electrical Engineering or STEM degree Be available to work full-time (40 hours per week) for at least 10 weeks during summer 2026. Be able to obtain and maintain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) as well as Program Special access within a reasonable period of time, as determined by the company to meet its business needs (U.S. citizenship is a pre-requisite) Preferred Qualifications: Have an overall cumulative GPA of 3.00/4.0 or higher Previous internship/co-op experience, leadership & teamwork capabilities, interpersonal communication skills, and activities (professional/community/extracurricular). Self-motivated, willing to learn, and interested in working in a team environment. Experience in MATLAB/Simulink, C/C++, Python Intern Pay Range: Bachelor's: $20.50 to $38.00 per hour Master's: $29.75 to $46.75 per hour At Northrop Grumman, our internship pay rates are standardized and take into account three main factors: the anticipated graduation date of the individual, the cost of labor of the geographic location, and whether the internship is considered technical or administrative. campusjobs Primary Level Salary Range: $20.50 - $46.75The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

About Marvell Marvell's semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities. At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead. Your Team, Your Impact Marvell DCE group is looking for an electrical engineering intern in the greater Los Angeles, CA office. The qualified candidate will work with a team of energetic, technically strong, multi-disciplined engineering team in the development of critical components for 800G, 1.6T ZR high speed optical communication systems that will enable the next generation cloud computing that powers the today's AI landscape. The successful candidate will be part of the Optics team responsible for validation of Analog front end design used in various physical medium devices, Photonics Integrated circuits, board-level hardware design, test development in microwave test and measurement at mm Wave and beyond, and scripting of automatic test systems for testing hardware with specific firmware. What You Can Expect Assisting in development and optimization of optical and electrical tests and characterization of photonic integrated circuit devices (active and passive) Develop automation test scripts for lab measurements and data analysis Effective collaboration with cross-functional teams Document technical processes and results and participate in technical discussions This internship is ideal for candidates passionate about photonics and eager to apply their academic knowledge to impactful projects in a fast-paced setting What We're Looking For Candidate MUST be currently pursuing a MS degree in CE/EE or related technical field(s) at ABET accredited University Recently completed a Bachelor's degree in Photonics, Physics, Electrical Engineering, Computer Science, or a related field Familiarity with lab equipment (e.g., laser source, power meter, oscilloscope, OSA, Polarization controller, and Network analyzer). Experience with optical fibers is a must Experience or coursework in optical simulation, photonic measurements, and Python programming. Familiarity with Photonic design and GDS layout tools is a plus Creative and out of box thinker, autonomous, strong problem-solving skills, and ability to work collaboratively in a team environment Effective written and verbal communication skills Expected Base Pay Range (USD) 32 - 63, $ per hour. The successful candidate's starting base pay will be determined based on job-related skills, experience, qualifications, work location and market conditions. The expected base pay range for this role may be modified based on market conditions. Additional Compensation and Benefit Elements For Internship roles, we are proud to offer the following benefits package during the internship - medical, dental and vision coverage, perks and discount programs, wellness & mental health support including coaching and therapy, paid holidays, paid volunteer days and paid sick time. Additional compensation may be available for intern PhD candidates. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Any applicant who requires a reasonable accommodation during the selection process should contact Marvell HR Helpdesk at *****************. Interview Integrity As part of our commitment to fair and authentic hiring practices, we ask that candidates do not use AI tools (e.g., transcription apps, real-time answer generators like ChatGPT, CoPilot, or note-taking bots) during interviews. Our interviews are designed to assess your personal experience, thought process, and communication skills in real-time. If a candidate uses such tools during an interview, they will be disqualified from the hiring process. This position may require access to technology and/or software subject to U.S. export control laws and regulations, including the Export Administration Regulations (EAR). As such, applicants must be eligible to access export-controlled information as defined under applicable law. Marvell may be required to obtain export licensing approval from the U.S. Department of Commerce and/or the U.S. Department of State. Except for U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. 1324b(a)(3), all applicants may be subject to an export license review process prior to employment. #LI-TT1

Throughout our worldwide network of experts, clients and communities, we are renowned for our leadership in fire protection engineering - a legacy of responsibility we have proudly upheld since 1939. Today, our expertise extends broadly across closely related security and risk-based fields - from accessibility consulting and risk analysis to process safety, forensic investigations, security risk consulting, emergency management, digital innovation and more. Our engineers and consultants collaborate to solve complex safety and security challenges, ensuring our clients can protect what matters most. For over 80 years, we have helped mitigate risks that threaten lives, property and reputations. Through technology, expertise and industry-leading research, we remain dedicated to our purpose of making our world safe, secure and resilient. At Jensen Hughes, we believe that creating and sustaining a culture of trust, integrity and professional growth starts with putting our people first. Our employees are our greatest strength, and we value the unique perspectives and talents they bring to our organization. Our wide range of Global Employee Networks connect people from across the organization, supporting career development and providing forums for individuals to share experiences on topics they're passionate about. Together, we are cultivating a connected culture where everyone has the opportunity to learn, grow and succeed together. Jensen Hughes is looking to hire college students for internships within our Fire Protection Engineering discipline across our locations throughout the United States. Please refer to our full list of office locations here. Responsibilities: Performs a variety of technical, both routine and moderately complex tasks that provide familiarity with programs, staff, and operating procedures. Collaborate and work under the direction of engineers to support Code Consulting, Fire Protection engineering and/or Security design efforts. Performs developmental assignments involving the application of standard engineering techniques, procedures, and criteria in carrying out routine engineering tasks under close supervision. Applies prescribed method to complete limited and specific portions of the broader assignment of an experienced engineer, adjusts and correlates data, recognizes discrepancies in results and follows operations through a series of related detailed steps or processes. Qualifications: Working towards a Bachelor's or Master's degree in Fire Protection, Mechanical, Chemical, or other related engineering fields At least two years of undergraduate schooling Responsible self-starter with problem solving and reasoning skills Demonstrate effective written and oral communication skills to write reports, business correspondence, presentations and procedure manuals, and to respond to questions from groups of managers, clients, and the public Passion for advancing the science of making our world safe, secure and resilient and exceeding our client expectations #LI-KS1 Jensen Hughes is an Equal Opportunity Employer. Qualified candidates will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. At Jensen Hughes, we embrace innovation and understand that people are increasingly using artificial intelligence (AI) tools like ChatGPT and other generative platforms to learn, prepare and communicate. We have provided some guidelines regarding the responsible use of AI in the recruitment process. Please click here to review. The security of your personal data is important to us. Jensen Hughes has implemented reasonable physical, technical, and administrative security standards to protect personal data from loss, misuse, alteration, or destruction. We protect your personal data against unauthorized access, use, or disclosure, using security technologies and procedures, such as encryption and limited access. Only authorized individuals may access your personal data for the purpose for which it was collected, and these individuals receive training about the importance of protecting personal data. Jensen Hughes is committed to compliance with all relevant data privacy laws in all areas where we do business, including, but not limited to, the GDPR and the CCPA. Additionally, our service providers are contractually bound to maintain the confidentiality of personal data and may not use the information for any unauthorized purpose. *Policy on use of 3rd party recruiting agency for direct placements Jensen Hughes will occasionally augment a recruiting search through agencies for certain positions when business conditions warrant. Jensen Hughes will not accept resumes, inquiries or proposals from recruiting agencies as an acceptable method to consider a candidate. 3rd party recruiting agencies must sign a standard Jensen Hughes agreement after being evaluated and accepted by a Human Resources or Talent Acquisition manager, or member of the talent acquisition team. Hiring managers and employees of Jensen Hughes are not authorized to accept resumes, engage in fee-based searches through recruiting firms or sign a search agreement. Please note this policy does not apply to “staffing firms” or firms that are involved with hiring temporary staff. Any recruiting agency interested in being considered may contact our recruiting team at jensenhughesrecruiting.com.

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe, and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represents a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Engineering Intern Role Overview: As a member of the HPA team, the Intern will work alongside experienced engineers providing mentoring, guidance, and introductions to colleagues. This Internship with MACOM will help the Intern to gain valuable work experience in a key discipline, build professional relationships, and take ownership of a business-critical project. During the 12 weeks each Intern will: > Be given an individual and well-defined project with set outcome goals > Gain hands on experience > Receive excellent training and ongoing supervision > Be invited to attend an intern webinar series > Attend networking/social events > Attend and present at Poster Session about each Interns project successes and pitfalls > Receive formal, written feedback Requirements: Currently enrolled in a Master's program, or Ph.D (preferred) in Electrical Engineering. Prerequisite Skills and Experience: * BSEE already acquired * Electrical Engineering / Digital Communications (Signal & System Engineering) / Electrical and Computer Engineering * Strong fundamentals with analog circuits (RLC networks) * Exposure to Electro-Magnetics, with hands-on experience using tools like HFSS * Experience with circuit simulators such as ADS Additional Desirable Skills: * MSEE already acquired * Great communication skills, written and verbal * Coding experience: Matlab, C++ EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs.

Radiant is an El Segundo, CA-based startup building the world's first mass-produced, portable nuclear microreactors. The company's first reactor, Kaleidos, is a 1-megawatt failsafe microreactor that can be transported anywhere power is needed and run for up to five years without the need to refuel. Portable nuclear power with rapid deploy capability can replace similar-sized diesel generators, and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant's unique, practical approach to nuclear development utilizes modern software engineering to rapidly achieve safe, factory-built microreactors that leverage existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor next year at the Idaho National Laboratory, with initial customer deliveries beginning in 2028. Internship Summer 2026 - Materials Engineer Radiant is seeking a highly motivated Materials Engineer Intern to own development, testing, and qualification of materials and related manufacturing processes used in the Kaleidos 1MW nuclear microreactor. The ideal candidate takes great ownership of their work end-to-end, is proficient in materials selection, testing, and analysis, and is excited to work in a highly cross-functional, fast-paced environment. You will be a key contributor to building the world's first mass-produced, rapidly-deployable nuclear reactor. Please note: we plan to begin interviewing for Summer 2026 internships in December/Janurary. Responsibilities & Duties Plan and execute materials testing to obtain material properties to inform design decisions. Develop and qualify application-specific manufacturing processes related to metals, ceramics, composites, or polymers. Provide expert guidance in materials selection for components within Kaleidos. Identify, procure, and operate equipment for materials characterization and testing. Evaluate data quality and accuracy of material property data for use in company materials database. Define or improve manufacturing processes of components to achieve desired material properties. Required Qualifications & Skills Enrolled in Bachelor's degree from an accredited institution in Materials Science and Engineering, or in Mechanical, Aeronautical, Nuclear, or Welding Engineering with a materials science and engineering focus. Experience working in the development, testing, and/or analysis of materials for demanding load cases and environments from projects, laboratory work, research, internships, or prior work experience Hands-on experimental or testing experience in laboratory or production environments Desired Qualifications & Skills Enrolled in a Master's or PhD degree from an accredited institution in Materials Science and Engineering, or in Mechanical, Aeronautical, Nuclear, or Welding Engineering with a materials science and engineering focus. Experience with development and qualification of solid-state processing of materials. Knowledge of standard test methods for materials and experience with development of design allowables. Self-motivated with strong organizational, written, and oral communication skills. Demonstrated ability to work collaboratively with design and operations teams to deliver high-value results. Experience with using text-based software development tools (Python or similar). Additional Requirements: This internship will require working onsite at our El Segundo HQ. You may be asked to work extended hours or weekends occasionally to support project goals. Total Compensation and Benefits Radiant's new hire compensation package includes base salary, substantial equity grants, and comprehensive benefits. Total compensation and level are determined through a holistic evaluation of your interview performance, experience, education, and qualifications. Benefits and Perks for Eligible Employees: Stock: Substantial incentive stock plan for all full-time employees. Medical: 100% premium coverage for base Silver level plan for employee + 50% premium coverage for dependents. Platinum plans available. One Medical: Sponsored memberships for eligible employees and their dependents. Vision: 100% premium coverage for top tier plan + 50% for dependents. Dental: 100% premium coverage for top tier plan (including orthodontia) + 50% for dependents. Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. Daily catered lunch. Free snacks and drinks. Flexible PTO policy. Remote workday allocation. Company and team-bonding events, happy hours and in-person camaraderie. Beautiful El Segundo headquarters close to the Pacific Ocean. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant's capacity to serve in compliance with U.S. export controls.

Interplastic Corporation - Hawthorne, CA Summer / Part-Time / Internship Program What is Interplastic Corporation? Interplastic Corporation is a family-owned manufacturer specializing in high-performance gel coats, resins, and advanced composite materials. Our products serve a wide range of industries, including marine, transportation, industrial, and construction. The Hawthorne, California facility is a key manufacturing location where engineering, operations, and production teams collaborate to deliver innovative and reliable solutions to our customers. We are committed to developing future engineering talent by providing meaningful, hands-on experience in a real manufacturing environment. What You'll Do as an Engineering Intern: As an Engineering Intern at Interplastic's Hawthorne plant, you will gain direct exposure to manufacturing operations, engineering processes, and continuous improvement initiatives. You'll work closely with engineers, plant leaders, and cross-functional teams to support projects that impact production efficiency, quality, and safety. This internship is designed to provide practical engineering experience while helping you explore a career in manufacturing and materials science. What You Can Expect to Do in This Role: Support engineering projects related to manufacturing processes, equipment, and production improvements. Assist with data collection, analysis, and documentation to support engineering and operational decisions. Participate in plant floor activities, including process observations and troubleshooting. Help create or update engineering documentation, SOPs, work instructions, or reports. Contribute to continuous improvement, lean manufacturing, or safety initiatives. Collaborate with production, quality, maintenance, and engineering teams. Learn about composite materials, chemical manufacturing processes, and plant operations. Build professional skills in problem-solving, communication, teamwork, and time management. What We Are Looking For: Required Qualifications: Currently enrolled in a college or university pursuing a degree in Engineering (Chemical, Mechanical, Industrial, Manufacturing, or related field). Interest in manufacturing, process engineering, or industrial operations. Strong communication, organizational, and analytical skills. Willingness to learn and work in a team-based, plant environment. Basic computer proficiency (Excel, Word, email, etc.). Preferred (but Not Required): Prior internship, co-op, or hands-on project experience. Coursework related to manufacturing, process engineering, or materials science. Curiosity, initiative, and a continuous improvement mindset. Why Intern with Interplastic? Hands-on, real-world engineering experience - not busywork Supportive mentors and experienced engineers invested in your growth Exposure to manufacturing operations and engineering career paths Stable, long-standing company with industry leadership Potential opportunity to return for future internships or full-time roles Pay Transparency: Hourly Compensation: $25.00Hours and schedule can be adjusted based on academic requirements. Equal Opportunity Employer: Interplastic Corporation is an equal opportunity employer and encourages diversity in the workplace. #LI-IPCORP

The City of Santa Ana is looking for individuals who are results-oriented, possess great attitude, demonstrate creativity and innovation, work efficiently, show a record of success and have a passion for public service. Having highly talented employees provides the best service to our community. This is a part-time internship position. The incumbent will work an average of 19 hours per week. Work schedule is to be determined. This recruitment is open until further notice and can close at any time and without notice. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. Development: Under direction of Engineering staff: Serves residents, contractors, developers, utility companies and other constituents at the Public Works Agency counter; Prepares and modifies cost estimate spreadsheets, basic exhibits and presentations; conducts data research and field investigations; Receives and distributes plan submittals; Issues construction, transportation, utility, and other permits; Reviews site plans for basic private developments; Reviews building plans to calculate development impact fees; Prepares correspondence to permit applicants with status of plan reviews and permit issuance; Performs a variety of general office tasks; and performs other related functions as assigned. Traffic: Assisting engineers in traffic engineering field investigations for existing conditions and proposed projects; conducting various engineering and warrant studies, researching project records, files, and plans; preparing/modifying plans using Microstation or manual drafting; using Microsoft Office PowerPoint, Excel, Word, Access, or other tools and databases to prepare presentation materials (maps, charts, spreadsheets, etc.); data entry; and placing and retrieving radar trailers. Additional job activities may include: conducting/evaluating speed studies, pedestrian, and vehicular counts, updating records, reviewing collision data, conducting parking surveys, issuing business/resident notices, making copies, filing, working with the public, and/or work with our signal operations team and equipment; other miscellaneous duties as assigned. In Signal Operations, additional functions include assisting engineers in operating Traffic Management Center; maintaining local area computer network; investigating traffic signal operations and complaints; maintaining traffic signal equipment, timing, and maintenance records; designing traffic signals, closed-circuit television, communication system, and other advanced traffic signal system elements; updating traffic signal plans manually or using CAD. Water Resources: Under the direction of Engineering staff, assists in the collection of field data; generates technical data, organizes documents, and coordinates data transmission to others; conducts manufacture website surveys for engineering drawings and equipment documentation; scans, records, maintains and organizes directories; updates and creates engineering drawings utilizing MicroStation; assists with the preparation and distribution of reports and documents; processes correspondence and material requisitions; performs other functions as assigned. CIP Engineering: Assignments are made to support the design and/or construction phase of projects. Design: In the design phase and under the direction of Engineering staff, the intern assists with the preparation of engineering drawings and estimates; prepares and modifies spreadsheets, project displays, and various reports; conducts data research, field investigations, and responds to the public and other agencies; performs a variety of general office tasks; and performs other related functions as assigned. Construction: In the construction phase and under the direction of Engineering staff, assist with the construction management of projects under the City's capital improvement program. Projects include construction of water, sewer, and storm drain lines, traffic signals, buildings, parks, street, sidewalk, drainage improvements, and other public facilities. Daily activities include spreadsheets, data research, correspondence, field investigations, preparing and distributing reports, responding to citizen and City agencies' inquiries, performing a variety of general office tasks, and working in the field assisting construction inspectors and survey crews. Additional responsibilities include assisting engineering staff during preconstruction and postconstruction activities. CHARACTERISTICS OF SUCCESSFUL PERFORMERS Candidates shall have a strong interest in engineering; be at ease in dealing with the public and handling complaints from residents with tact and diplomacy; be detail-oriented, organized, have good time-management skills within a vibrant work environment and seek answers should none be obvious. Candidates must be flexible, have good verbal and written communication skills, computer skills and work well with others and with minimal supervision. * Traffic: Must be currently enrolled in an UNDERGRADUATE Civil, Electrical, or Pre-Engineering curriculum with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred). Not open to Graduate/Post-Graduate students. * Development/Water Resources: Must be currently enrolled in an UNDERGRADUATE Civil/Environmental/Mechanical or Pre-Engineering Program with a good standing of a current GPA of 2.50 or higher (Sophomore or Junior level is preferred.) Not open to Graduate/Post-Graduate students * CIP Engineering: Must be currently enrolled in an UNDERGRADUATE Civil Engineering or Construction Management Program with a good standing of a current GPA of 2.50 or higher (Sophomore and Junior level is preferred). Not open to Graduate/Post-Graduate students. * Must have ample knowledge of computer software such as AutoCAD and/or Microstation and Microsoft Office applications, as well as the ability to work comfortably in a Windows environment. * Possession and retention of an appropriate valid driver's license is a condition of continued employment in this classification. * Bilingual fluency in English and Spanish is preferred but not required. Application, supplemental questionnaire, and required documents must be submitted online. Click on the "Apply" link located at the top of this page. New users must create an account first. Click on this link for instructions on how to set up your account and apply for the first time: Online Employment Application Guide. PLEASE ATTACH THE FOLLOWING DOCUMENTS TO YOUR ONLINE APPLICATION (IF YOU DO NOT ATTACH THE FOLLOWING DOCUMENTS, THE SYSTEM WILL NOT ALLOW YOU TO SUBMIT YOUR APPLICATION): * References - List names, addresses, and phone numbers of three references, one of which must be a current or former professor (you may list these in the "References" section of the application or attach a list) * Proof of current school enrollment in an accredited Construction Management/Engineering/Pre-Engineering/Civil/Mechanical/Electrical Engineering curriculum. Please attach a copy of your unofficial transcripts in PDF format which lists your name, your school's name, your major, and the classes in which you are CURRENTLY/ACTIVELY enrolled. * Resume - please attach your resume in PDF format. The Human Resources and Public Works Department will review all applications and documents submitted. Those candidates who possess the most pertinent qualifications will be invited for an oral interview by the hiring agency. If you have any questions about the job duties assigned to the Development Division, please contact Yvonne Soto at **************. If you have any questions about the job duties assigned to the Traffic Division, please call Victor Chaidez at **************. If you have questions about the job duties assigned to the Design Division, please contact David Ramirez at **************. If you have any questions about the job duties assigned to the Water Resources Division, please contact Jaime Arias **************. If you have any questions about the job duties assigned to the Construction Division, please call Ed Torres at **************. Candidates given a conditional job offer will be required to undergo and pass a medical exam and background records check. The City of Santa Ana is an equal opportunity employer. If you consider yourself a person with a disability, you may contact us regarding providing reasonable accommodation.

Job Description Job Type: Temporary Internship: A minimum of 20 hours per week, but up to 40 hours, as determined by internal availability and company workload. Duration: 3-4 months (May/June-August 2026) Compensation: $25-$27/hr Dudek's journey began in 1980 with a vision to serve Southern California's water and wastewater agencies. Today, we are a 100% employee-owned firm supporting clients nationwide and delivering projects that improve and protect the built and natural environments of communities throughout the United States. Our work has been recognized by leading industry organizations, and we've been honored with multiple national Top Workplace Awards. Our employee-owners are unified by a singular commitment to supporting projects that address key societal issues, such as the transition to renewable energy, infrastructure hardening and repair, environmental protection, and community resilience. Learn more about our award-winning culture, the benefits and perks of being a Dudekian, and the projects you will have the opportunity to shape. Who You Are As an employee-owner, you embrace accountability, working safely, and collaboration while thinking resourcefully and independently. Like all Dudekians, you are curious and solution-oriented, with the ability to adapt quickly to changes and approach challenges with a spirit of innovation. How You'll Make an Impact EEPIC strives to expand the environmental, engineering, economics, and planning industries with a workforce that more accurately represents the communities where we live, work, and serve. The mission of EEPIC is to implement a unified internship program for all students in this business sector including but not limited to those students who represent Black, Indigenous, and People of Color (BIPOC), as well as veterans, individuals with disabilities, and/or students who are first in their families to go to college and provide them with opportunities for professional development, networking, and a pathway into the industry. The Environmental, Engineering, and Planning Internship and Charrette (EEPIC) program is a collaborative effort between seven firms (Ascent, Dudek, ESA, Fehr & Peers, Placeworks, EPS, and Rincon) who are all committed to change through the creation of more opportunities in the environmental, engineering and planning fields for students from underrepresented communities. Dudek is currently accepting applications for the 2026 Internship Program through February 6th, 2026, at 6:00 p.m. Program Details Internship will be approximately 3-4 months (May/June -August 2026) A minimum of 20 hours, but more hours can be available if appropriate. The program includes a collaborative 2-week charrette in July working on a project in Berkely, Ca (travel and lodging will be covered, if needed, during the charrette) You will be required to work in-person at one of our California offices. Please note, lodging is not covered for anytime outside of the charrette. What You Will Experience Produce planning, environmental, engineering, economic, and other technical work products. Analyze data and contribute to research. Work with diverse technical teams. Learn about local planning, environmental, engineering issues, and requirements. Conduct assignments in the field (i.e., visit project sites). Participate in public outreach and collaboration. Collaborate and network with other diverse students in the cohort. Minimum Qualifications All candidates must include their cover letter and resume with their application. Current upper division college/university students or recent graduates are desired. However, all community college, undergraduate, graduate, and doctorate students are welcome to apply. Experience using Microsoft Office; PowerPoint, Word, Excel desired. Qualified candidates should be studying one of the related topics of study: Environmental Studies Urban Planning and Design *Your resume and information may be shared with the other collaborating firms to ensure that you have an opportunity to participate* Compensation: $25-27/hourly* *Final agreed-upon compensation will be based on a variety of factors including, but not limited to, an individual's related experience, education, certifications, skills, and work location. Successful candidates must pass a pre-employment drug test and background check prior to beginning employment. Working Conditions: Environment This job operates in a remote or office-based environment and this role routinely uses standard office equipment such as computers, phones, printers, etc. This job may also require occasional project site visits, based outdoors which can include excessive noise, uneven walking surfaces, extreme weather, and moving vehicles and equipment. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of the job. This job requires the following: Working on a computer, sitting, or standing for long periods of time in an office or remote office setting. Employees must be capable of bending, squatting, climbing ladders, and lifting up to 35 lbs. unassisted; 50lbs in a team lift (two or more employees). Attending meetings, both in person and virtually, and speaking on the phone with peers, clients, etc. Specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Dudek is committed to creating a workplace where all employees, regardless of their background, feel valued, respected, and have equal opportunities to succeed. We believe that a diverse and inclusive workforce is essential to our business success, and we are dedicated to fostering a culture where everyone can thrive. We are committed to fair and equitable processes, based on merit, free from any discrimination. Dudek is genuinely committed to equal employment opportunities within our company and on our project teams. Dudek is also committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Dudek's operations and prohibits unlawful discrimination by any employee of Dudek, including supervisors and coworkers. Equal employment opportunities will be extended to all persons (including those with disability and veteran status) in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, compensation, benefits, discipline, layoff, recall, and termination. Any employee who violates this policy and Dudek's commitment to equal employment opportunities will be subject to disciplinary action. Dudek is a U.S.-based employer. All positions are based in the United States and require U.S. work authorization. Powered by JazzHR fz XrF9Nfqm

Honda Racing Corporation USA, a leader in motorsports racing, is seeking several highly organized and detailed oriented Engineers, Technicians and CNC programmer/machinist to joins its racing program in Santa Clarita, CA: Chassis Development Engineer: Test, modify, and evolve hardware systems on race cars and track-focused road cars. Validate durability and performance against technical targets. Report lessons learned and document failures; manage problem resolution. Analyze logged data to identify root causes and devise countermeasures. Collaborate with designers and manage 3rd parties for design changes. Execute testing of countermeasure parts and new vehicle hardware updates. Specify instrumentation, perform data analysis, and write development reports. Innovate new testing tools and methods for track and rig tests. Development Engineer: Create development plans for concepts and components. Oversee full product life cycle from concept to production. Execute required tests and validations to meet project goals. Quality Engineer: Quality Control: Develop inspection protocols, validate measurement equipment. New Product Introduction & Corrective Actions: Lead cross-functional troubleshooting. Non-Conformance Management: Review issues, manage tooling calibration. Advanced Product Quality Planning: Conduct first article inspections, process validation. Data Analysis & Continuous Improvement: Generate reports, plan Six Sigma activities. Engine Dyno Technician: Set up/install/remove engines in test cells, configure instrumentation. Execute dyno tests, maintain equipment, review data, and report issues. Automotive Mechanics/Technicians: Build/rebuild racing chassis and hybrid systems. Perform quality checks, assembly, teardown, and inspection. Train new associates and support race car performance objectives. CNC Programmer/Machinist: Program CNC machines using MasterCam for high-performance engine components. Design fixtures/tooling and manage CNC setup and operation.

Definition will be open until filled To perform professional and technical engineering work in an assigned area such as plan and development review, contract administration and design; and to provide technical staff assistance to higher level engineering staff. Position Snapshot/A Day in the Life: This Associate Engineer position will be within the Traffic Division of the Public Works/Engineering Department. With a team of 11 (7 of whom are primarily responsible for signal operations and maintenance), we are responsible for overseeing the City's transportation system, including supporting Capital Improvements Projects, Land Development projects, Street Maintenance, Planning, and others. Under the direction of a Senior Engineer or City Traffic Engineer, you will primarily be responsible for reviewing private development and capital improvement project related traffic studies, identifying impacts and deficiencies, and determining the most appropriate improvements and design features needed. Other day-to-day duties will also involve reviewing and preparing signing/striping plans and traffic control plans, investigating and responding to concerns from the general public, and participating in long-range planning activities. You may also be asked to help work on special projects and grant pursuits, preparing staff reports, participating in interagency coordination efforts, preparing RFP's/RFQ's, reviewing and processing proposals/contracts/traffic plans, and conducting various meetings. Distinguishing Characteristics: This is the journey level class within the Engineering series. Employees within this class are distinguished from the Assistant Civil Engineer by the performance of the full range of duties as assigned. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies within the work unit. Positions in this class are flexibly staffed and may be filled by advancement from the Assistant level. Supervision Received and Exercised: Receives direction from higher level engineering staff and may exercise technical supervision over less experienced staff within the work unit and technical or functional supervision over staff within the Department. Essential Functions The incumbent must have the ability to: Review and check residential and commercial building plans or plans related to structures such as streets, sidewalks, gutters and other off-site construction; check plans for conformance with regulations regarding line, grade, size, elevation and location of structures; check calculations Maintain records of all plans and contract documents. Prepare progress reports on projects under construction; maintain records of changes and field notes. Investigate field problems affecting property owners, contractors and maintenance operations. Coordinate assigned activities with consultants, engineers, developers, contractors, other city departments and divisions, and with outside agencies. Develop plans, specifications and other contract documents. Provide technical and professional engineering support services relative to assigned areas of responsibility. Prepare special engineering studies and reports; perform special assignments on engineering problems as necessary. Plan, prepare and design a variety of engineering projects such as roads, bridges, structures and hydraulics. Calculate the quantity, quality and cost of materials used for various projects. Review engineering calculations of other engineers or engineering technicians. Prepare plans and specifications, maps, deeds and legal descriptions. Review plans for traffic signals, traffic signing, and traffic striping for conformance with City policies and State and Federal requirements. Plan, prepare, and design a variety of engineering projects, such as traffic signals, traffic striping, and traffic signing. Review all permits involving work in public streets; review any and all traffic control plans required due to work in streets. Prepare traffic control plans and requirements. Communicate clearly and concisely, both orally and in writing. Establish and maintain cooperative working relationships with those contacted in the course of work. Perform and other tasks or functions that may be deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS:In the performance of daily activities, this position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, and bending; the ability to push, pull, drag and/or lift up to 25 pounds; normal manual dexterity and hand/eye coordination; repetitive hand and wrist movement using a computer keyboard and mouse; corrected vision to normal range; acute hearing; written and oral communication; use of standard office equipment such as computers, telephones, copiers, calculators and facsimiles; frequent contact with other staff and the public; may be exposed to severe weather conditions such as high wind, rain, and other outside conditions. Experience and Training Guidelines A combination of experience and training that would provide the required knowledge and abilities is qualifying. The incumbent must have the knowledge of: Principles and practices of civil engineering. Methods, materials and techniques used in the construction of public works projects. Modern developments, current literature and sources of information regarding engineering. Principles of advanced mathematics and their application to engineering work. Applicable laws and regulatory codes in assigned area of responsibility. The ideal candidate will have a strong technical background in preparing and reviewing transportation analysis for a range of project scales and being able to interpret the practical implications of the analysis results. They would be familiar with VMT, the current industry trends related to its implementation, and be able to assist the team in managing and updating our Traffic Impact Guidelines. They'll have excellent skills in using Excel and be comfortable working within it to create reliable and flexible tools for day-to-day analysis needs. The Traffic division and the City pursue significant grants and special projects that allow us to grow our infrastructure and capabilities, as well as to implement the best practices in the industry, the ideal candidate would be someone who is knowledgeable about the current trends in the Transportation engineering and planning fields and be able to lead grant pursuit efforts and independently manage such projects along with coordination with stakeholders of competing interests. Experience: One (1) to two (2) years of increasingly responsible experience in civil engineering. Preferred Qualifications At least two (2) years of experience preparing and reviewing transportation impact analyses for a range of project scales and being able to interpret the practical implications of the analysis results. Familiarity with VMT, the current industry trends related to its implementation, and have experience managing and/or updating Traffic Impact Guidelines. Advanced proficiency in Microsoft Excel, including building tools for transportation data analysis. Experience managing transportation projects and coordinating with internal and external stakeholders with competing interests. Experience presenting at public meetings and responding to questions/feedback from elected or appointed officials. Traffic Engineering license. Education: Equivalent to a Bachelor's degree from an accredited college or university with major coursework in civil engineering or a closely related field. Some additional years of experience and specialized training may substitute for some of the educational requirements. License or Certificate: Possession of, and continuously throughout employment, a valid CA Class "C" Driver's License. Supplemental Information Successful candidates will be required to complete an annual Statement of Economic Interest Form (700 Form) and bi-annual ethics training pursuant to AB 1234. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Do you currently possess a valid California Class "C" Driver's License? Yes No 03 List three LOS based traffic studies that you have worked on, and in three or four sentences identify the general scope, your role in the analysis, and its current status (e.g. undergoing entitlement, approved, constructed, etc.)? 04 List three VMT based traffic studies that you have worked on, and in three or four sentences identify the general scope, your role in the analysis, and its current status (e.g. undergoing entitlement, approved, constructed, etc.)? 05 Have you worked with a project that required VMT mitigation? If yes, in two or three sentences, please describe the impacts and the mitigation selected. 06 Have you prepared and presented at a public hearing, such as a planning commission, technical committee, or city council meeting? Yes No 07 If you answered yes to question #6. Please describe in three or four sentences the meeting setting, the presentation topic, and your role in the presentation. 08 How comfortable are you using Excel? Please describe in three to four sentences a transportation related project where you utilized Excel, mention the purpose, who or what the results/tool was intended for, and the level of complexity. 09 How comfortable are you using Synchro? Please describe in two to three sentences your level of experience with using Synchro. 10 Do you have a TE License? If not, are you planning on achieving licensure as a TE? Are there any other transportation related certifications you possess or are pursuing? Required Question

The Digital Business Technology Infrastructure (DBT) Intern has the opportunity to work with and be mentored by technology specialists in conducting network and server operational tasks for Information Technology services for the enterprise. Day-to-day Responsibilities * Assist with virtual server and IT networking day to day operations. Conduct inventory review for operational status of devices and services for technical expected states. * Review Infrastructure monitoring tools and responding and documenting disruptions. * Validate that Service level agreements (SLA) are in place and enforced for all devices in operations with the enterprise. * Assists in educating, monitoring, and training personnel in safe work procedures * Monitor on-prem data center floor. Inspect devices in various racks for any warning or outage related notifications for various devices. * Works on assignments that are routine in nature, requiring limited judgment * Receives detailed instructions on all work under close supervision * Other duties as assigned Basic Qualifications (Preferred Skills & Experience) * Currently enrolled and working on a 4-year degree in a related field (Information Technology, Computer Science.) * 0 - 1 year of experience in a related field with experience working with technology related systems * 3.0 GPA or higher preferred Other Qualifications & Desired Competencies * Current certification in any of Microsoft, AWS, CompTia, ITIL preferred * Demonstrates competency in researching and applying DBT compliance regulations to site operations * Maintain a level of competence in DBT regulatory compliance * Has effective problem-solving, analytical, interpersonal and communication skills Physical Demands * Ability to work in an office and manufacturing environment (Constant) * Able to climb ladders, stoop, kneel, twist, bend (Occasional) * Ability to lift up to 50 pounds (Occasional) * Ability to transition between sitting, standing, and walking for extended periods of time (Frequent) Clearance Level Clearance Level The salary range for this role is: $0 - $0 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Our Mission As humans, there are few things more exciting than meeting someone new. At Tinder, we're inspired by the challenge of keeping the magic of human connection alive. With tens of millions of users, hundreds of millions of downloads, 2+ billion swipes per day, 20+ million matches per day, and a presence in 190+ countries, our reach is expansive-and rapidly growing. We work together to solve complex problems. Behind the simplicity of every match, we think deeply about human relationships, behavioral science, network economics, AI and ML, online and real-world safety, cultural nuances, loneliness, love, sex, and more. Program DurationThe internship program will run from June 1 through August 28, 2026. Where you'll work This is a hybrid role that requires in-office collaboration three days per week in Los Angeles. About the Role As a Cloud Infrastructure Engineer Intern, you'll work with experienced engineers who design, build, and maintain the systems that keep Tinder running at scale. You'll gain real-world experience learning how large-scale cloud environments operate and help ensure our platform is reliable, secure, and efficient.What you'll do: Learn how Tinder manages and scales cloud infrastructure that supports millions of users. Assist in building and automating tools that help monitor, deploy, and maintain cloud-based systems. Work on improving system reliability, performance, and security under guidance from senior engineers. Collaborate with engineering teams across the organization to support development and deployment workflows. Participate in team meetings, and code reviews. What we're looking for: Interest in cloud computing, DevOps, or infrastructure engineering. Basic understanding of cloud platforms like AWS, GCP, or Azure (from coursework or personal learning). Familiarity with at least one programming or scripting language (e.g., Python, Go, or Bash). Curiosity about infrastructure tools like Docker, Kubernetes, or Terraform (bonus if you've used them). Currently pursuing a Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. $47 - $47 an hour The compensation range listed above is representative of the hourly rate offered. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary range is reflective of a position based in Los Angeles, California. This hourly rate will be subject to a geographic adjustment (according to a specific city, state, and country), if an authorization is granted to work outside of the location listed in this posting. Commitment to Inclusion At Tinder, we don't just accept difference, we celebrate it. We strive to build a workplace that reflects the rich diversity of our members around the world, and we value unique perspectives and backgrounds. Even if you don't meet all the listed qualifications, we invite you to apply and show us how your skills could transfer. Tinder is proud to be an equal opportunity workplace where we welcome people of all sexes, gender identities, races, ethnicities, disabilities, and other lived experiences. Learn more here: ******************************** If you require reasonable accommodation to complete a job application, pre-employment testing, or a job interview or to otherwise participate in the hiring process, please speak to your Talent Acquisition Partner directly. #Tinder We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Discover careers that change the world and further advancements in defense, technology, and engineering today at Northrop Grumman. Use your experience to grow your career and support our global customers with the technology, systems, and solutions they need to enable their missions on the front lines and secure our world every day. With Northrop Grumman, you'll discover a culture built on diversity, respect, and above all teamwork. Together with our group of experts across the technical spectrum, you'll discover opportunities to make a difference in our world and start solving some of the world's most critical problems in the most innovative ways. An internship at Northrop Grumman is unique. Sure, you'll learn new skills, explore our enterprise, network with experts, connect with thought leaders, and finish with a resume that opens doors. But you'll gain something even more valuable: pride in what you've done. Join us and launch your career. We'll support you with training, employee resource groups, and our shared vision of global security. Northrop Grumman is seeking Engineers for an internship opportunity. This position will be located at our Defense Systems Sector in Northridge, CA The qualified candidate will become part of Northrop Grumman's Advanced Weapons team within our Weapon Systems Division. Basic Qualifications A candidate must meet ALL of the below criteria. The candidate must: Be a student who is enrolled full-time and pursuing an undergraduate or graduate degree from an accredited college/university and will be enrolled full time in Fall 2026. Be majoring in or having majored in a STEM (Science, Technology, Engineering or Math) degree Be available to work full-time (40 hours per week) for at least 10 weeks during summer 2026. Be able to obtain a U.S. Government security clearance (U.S. citizenship is a pre-requisite) Preferred Qualifications: Have an overall cumulative GPA of 3.0/4.0 or higher At Northrop Grumman, our internship pay rates are standardized and take into account three main factors: the anticipated graduation date of the individual, the cost of labor of the geographic location, and whether the internship is considered technical or administrative. Undergraduate degrees (Including graduating students planning on attending/enrolled in a full-time Master's program): $25.75 - $38.00 Masters degrees: $37.25- $46.75 Campusjobs The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Throughout our worldwide network of experts, clients and communities, we are renowned for our leadership in fire protection engineering - a legacy of responsibility we have proudly upheld since 1939. Today, our expertise extends broadly across closely related security and risk-based fields - from accessibility consulting and risk analysis to process safety, forensic investigations, security risk consulting, emergency management, digital innovation and more. Our engineers and consultants collaborate to solve complex safety and security challenges, ensuring our clients can protect what matters most. For over 80 years, we have helped mitigate risks that threaten lives, property and reputations. Through technology, expertise and industry-leading research, we remain dedicated to our purpose of making our world safe, secure and resilient. At Jensen Hughes, we believe that creating and sustaining a culture of trust, integrity and professional growth starts with putting our people first. Our employees are our greatest strength, and we value the unique perspectives and talents they bring to our organization. Our wide range of Global Employee Networks connect people from across the organization, supporting career development and providing forums for individuals to share experiences on topics they're passionate about. Together, we are cultivating a connected culture where everyone has the opportunity to learn, grow and succeed together. Jensen Hughes is looking to hire college students for internships within our Fire Protection Engineering discipline across our locations throughout the United States. Please refer to our full list of office locations here. Responsibilities: Performs a variety of technical, both routine and moderately complex tasks that provide familiarity with programs, staff, and operating procedures. Collaborate and work under the direction of engineers to support Code Consulting, Fire Protection engineering and/or Security design efforts. Performs developmental assignments involving the application of standard engineering techniques, procedures, and criteria in carrying out routine engineering tasks under close supervision. Applies prescribed method to complete limited and specific portions of the broader assignment of an experienced engineer, adjusts and correlates data, recognizes discrepancies in results and follows operations through a series of related detailed steps or processes. Qualifications: Working towards a Bachelor's or Master's degree in Fire Protection, Mechanical, Chemical, or other related engineering fields At least two years of undergraduate schooling Responsible self-starter with problem solving and reasoning skills Demonstrate effective written and oral communication skills to write reports, business correspondence, presentations and procedure manuals, and to respond to questions from groups of managers, clients, and the public Passion for advancing the science of making our world safe, secure and resilient and exceeding our client expectations #LI-KS1 Jensen Hughes is an Equal Opportunity Employer. Qualified candidates will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. At Jensen Hughes, we embrace innovation and understand that people are increasingly using artificial intelligence (AI) tools like ChatGPT and other generative platforms to learn, prepare and communicate. We have provided some guidelines regarding the responsible use of AI in the recruitment process. Please click here to review. The security of your personal data is important to us. Jensen Hughes has implemented reasonable physical, technical, and administrative security standards to protect personal data from loss, misuse, alteration, or destruction. We protect your personal data against unauthorized access, use, or disclosure, using security technologies and procedures, such as encryption and limited access. Only authorized individuals may access your personal data for the purpose for which it was collected, and these individuals receive training about the importance of protecting personal data. Jensen Hughes is committed to compliance with all relevant data privacy laws in all areas where we do business, including, but not limited to, the GDPR and the CCPA. Additionally, our service providers are contractually bound to maintain the confidentiality of personal data and may not use the information for any unauthorized purpose. *Policy on use of 3rd party recruiting agency for direct placements Jensen Hughes will occasionally augment a recruiting search through agencies for certain positions when business conditions warrant. Jensen Hughes will not accept resumes, inquiries or proposals from recruiting agencies as an acceptable method to consider a candidate. 3rd party recruiting agencies must sign a standard Jensen Hughes agreement after being evaluated and accepted by a Human Resources or Talent Acquisition manager, or member of the talent acquisition team. Hiring managers and employees of Jensen Hughes are not authorized to accept resumes, engage in fee-based searches through recruiting firms or sign a search agreement. Please note this policy does not apply to “staffing firms” or firms that are involved with hiring temporary staff. Any recruiting agency interested in being considered may contact our recruiting team at jensenhughesrecruiting.com.

Radiant is an El Segundo, CA-based startup building the world's first mass-produced, portable nuclear microreactors. The company's first reactor, Kaleidos, is a 1-megawatt failsafe microreactor that can be transported anywhere power is needed and run for up to five years without the need to refuel. Portable nuclear power with rapid deploy capability can replace similar-sized diesel generators, and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant's unique, practical approach to nuclear development utilizes modern software engineering to rapidly achieve safe, factory-built microreactors that leverage existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor next year at the Idaho National Laboratory, with initial customer deliveries beginning in 2028. Nuclear Engineering Intern Radiant is seeking a highly motivated Nuclear Engineering Intern to support the design and analysis of nuclear systems for a 1MW HTGR nuclear microreactor. As part of the engineering team, you will work alongside experienced nuclear engineers and gain hands-on experience in areas such as neutronics, thermal-hydraulics, shielding, and fuel analysis. This internship offers direct mentorship in a fast-paced startup environment, providing you with a unique opportunity to contribute to the development of the first new fueled reactor design in over 50 years. Please note: we plan to begin interviewing for Summer 2026 internships in November/December. Responsibilities & Duties Assist with nuclear design and analysis tasks, including shielding, neutronics, thermal, and fuel-related studies. Support coupled neutronics and thermal calculations to refine system performance models. Document methods, results, and findings in clear technical reports and presentations. Collaborate with cross-functional teams and provide technical input as projects evolve. Support the development of lower order shielding analysis models to develop rapid shielding design solutions. Support the development of uncertainty propagation methodology and its execution on the Kaleidos Demonstration Unit Perform criticality safety analysis for the Production Plant of Kaleidos reactors Present a final project review at the end of internship to engineers and leadership Required Qualifications & Skills Currently pursuing a bachelor's or master's degree in nuclear engineering or a related discipline. Strong academic foundation in nuclear engineering principles (e.g., reactor physics, thermal-hydraulics, radiation shielding). Proficiency in at least one programming language (Python, C++, C#, or similar). Desired Qualifications & Skills Hands-on experience through coursework, research, projects, or labs in nuclear system design or analysis. Familiarity with nuclear simulation codes (e.g., OpenMC, Serpent, MCNP, MOOSE, BISON, RELAP, CFD, Pronghorn, GRIFFIN). Prior software development experience or exposure to version control, testing, or documentation practices. Strong communication skills and ability to work in a collaborative team environment. Enthusiasm for Radiant's mission to rapidly deploy nuclear microreactors to provide clean energy in remote locations. Additional Requirements This internship is based 100% onsite at Radiant's HQ in El Segundo, CA. Extended hours or occasional weekend work may be required to support project milestones. Total Compensation and Benefits Radiant's new hire compensation package includes base salary, substantial equity grants, and comprehensive benefits. Total compensation and level are determined through a holistic evaluation of your interview performance, experience, education, and qualifications. Benefits and Perks for Eligible Employees: Stock: Substantial incentive stock plan for all full-time employees. Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. One Medical: Sponsored memberships for employees and their dependents. Vision: 100% top tier plan coverage + 50% for dependents. Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. Daily catered lunch. Free snacks and drinks. Flexible PTO policy. Remote workday allocation. Company and team-bonding events, happy hours and in-person camaraderie. Beautiful El Segundo headquarters close to the Pacific Ocean. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant's capacity to serve in compliance with U.S. export controls.

Job Type: Temporary Internship: A minimum of 20 hours per week, but up to 40 hours, as determined by internal availability and company workload. Duration: 3-4 months (May/June-August 2026) Compensation: $25-$27/hr Dudek's journey began in 1980 with a vision to serve Southern California's water and wastewater agencies. Today, we are a 100% employee-owned firm supporting clients nationwide and delivering projects that improve and protect the built and natural environments of communities throughout the United States. Our work has been recognized by leading industry organizations, and we've been honored with multiple national Top Workplace Awards. Our employee-owners are unified by a singular commitment to supporting projects that address key societal issues, such as the transition to renewable energy, infrastructure hardening and repair, environmental protection, and community resilience. Learn more about our award-winning culture, the benefits and perks of being a Dudekian, and the projects you will have the opportunity to shape. Who You Are As an employee-owner, you embrace accountability, working safely, and collaboration while thinking resourcefully and independently. Like all Dudekians, you are curious and solution-oriented, with the ability to adapt quickly to changes and approach challenges with a spirit of innovation. How You'll Make an Impact EEPIC strives to expand the environmental, engineering, economics, and planning industries with a workforce that more accurately represents the communities where we live, work, and serve. The mission of EEPIC is to implement a unified internship program for all students in this business sector including but not limited to those students who represent Black, Indigenous, and People of Color (BIPOC), as well as veterans, individuals with disabilities, and/or students who are first in their families to go to college and provide them with opportunities for professional development, networking, and a pathway into the industry. The Environmental, Engineering, and Planning Internship and Charrette (EEPIC) program is a collaborative effort between seven firms (Ascent, Dudek, ESA, Fehr & Peers, Placeworks, EPS, and Rincon) who are all committed to change through the creation of more opportunities in the environmental, engineering and planning fields for students from underrepresented communities. Dudek is currently accepting applications for the 2026 Internship Program through February 6 th , 2026, at 6:00 p.m. Program Details Internship will be approximately 3-4 months (May/June -August 2026) A minimum of 20 hours, but more hours can be available if appropriate. The program includes a collaborative 2-week charrette in July working on a project in Berkely, Ca (travel and lodging will be covered, if needed, during the charrette) You will be required to work in-person at one of our California offices. Please note, lodging is not covered for anytime outside of the charrette. What You Will Experience Produce planning, environmental, engineering, economic, and other technical work products. Analyze data and contribute to research. Work with diverse technical teams. Learn about local planning, environmental, engineering issues, and requirements. Conduct assignments in the field (i.e., visit project sites). Participate in public outreach and collaboration. Collaborate and network with other diverse students in the cohort. Minimum Qualifications All candidates must include their cover letter and resume with their application. Current upper division college/university students or recent graduates are desired. However, all community college, undergraduate, graduate, and doctorate students are welcome to apply. Experience using Microsoft Office; PowerPoint, Word, Excel desired. Qualified candidates should be studying one of the related topics of study: Environmental Studies Urban Planning and Design *Your resume and information may be shared with the other collaborating firms to ensure that you have an opportunity to participate* Compensation: $25-27/hourly* *Final agreed-upon compensation will be based on a variety of factors including, but not limited to, an individual's related experience, education, certifications, skills, and work location. Successful candidates must pass a pre-employment drug test and background check prior to beginning employment. Working Conditions: Environment This job operates in a remote or office-based environment and this role routinely uses standard office equipment such as computers, phones, printers, etc. This job may also require occasional project site visits, based outdoors which can include excessive noise, uneven walking surfaces, extreme weather, and moving vehicles and equipment. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of the job. This job requires the following: Working on a computer, sitting, or standing for long periods of time in an office or remote office setting. Employees must be capable of bending, squatting, climbing ladders, and lifting up to 35 lbs. unassisted; 50lbs in a team lift (two or more employees). Attending meetings, both in person and virtually, and speaking on the phone with peers, clients, etc. Specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Dudek is committed to creating a workplace where all employees, regardless of their background, feel valued, respected, and have equal opportunities to succeed. We believe that a diverse and inclusive workforce is essential to our business success, and we are dedicated to fostering a culture where everyone can thrive. We are committed to fair and equitable processes, based on merit, free from any discrimination. Dudek is genuinely committed to equal employment opportunities within our company and on our project teams. Dudek is also committed to compliance with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in Dudek's operations and prohibits unlawful discrimination by any employee of Dudek, including supervisors and coworkers. Equal employment opportunities will be extended to all persons (including those with disability and veteran status) in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, compensation, benefits, discipline, layoff, recall, and termination. Any employee who violates this policy and Dudek's commitment to equal employment opportunities will be subject to disciplinary action. Dudek is a U.S.-based employer. All positions are based in the United States and require U.S. work authorization.