Engineering technician jobs in Chapel Hill, NC - 588 jobs

Role: Maintenance Engineering Technician (PLC Programming) Industrial Maintenance experience in a manufacturing environment or equipment installation and debugging experience Experience with Electrical and/or mechanical systems in an industrial manufacturing environment Technical experience with PLCs in programming, including read, write and modify logic Technical experience with Servo Motion Controllers Technical experience with relay logic including wiring and troubleshooting Technical experience with Robotics including programming and troubleshooting. Experience with Hydraulic or Pneumatic troubleshooting and schematic reading Availability to work overtime, holidays, weekends, and shutdowns Ability for business travel, both domestic and international - up to 30%. Added bonus if you have: Technical associate degree or higher or equivalent experience Experience in Pre-Production set up Experience with Production Processes including Standardized Work (STW) and Job Instruction Sheets (JIS) Experience gathering and analyzing quality data from multiple sources New plant or facility startup experience Experience with high volume production in a clean room environment

Insight Global is seeking an IT Automation Engineer to support the delivery of highly automated warehouse and intralogistics projects. The role focuses on integrating advanced material handling systems (ASRS, conveyors, AGVs/AMRs) and complex IT/OT automation (SCADA, WCS, SAP) to enable seamless, automated supply chain flows. Key Responsibilities Test, commission, and debug PLC-driven warehouse automation integrated with SAP EWM or other WMS. Integrate automation systems with IT infrastructure, including Active Directory and cybersecurity. Program and debug PLCs (e.g., Siemens S7-1500). Work with commercial or custom WCS platforms (e.g., Dematic iQ, Honeywell Intelligrated, Swisslog SynQ). Ensure compliance with local and global standards. Develop interface agreements and align requirements with equipment vendors. Maintain and improve process control systems. Support audits and act as SME for process control systems. Coach and train colleagues in relevant areas. Implement effective change management and support process improvement initiatives. Qualifications Bachelor's degree in engineering or related field (or equivalent experience). 5+ years of engineering experience in process-based manufacturing, utilities, or packaging systems. Experience with warehouse automation equipment (ASRS, AGVs, AMRs, conveyors) preferred. Knowledge of SAP EWM, PLC, DCS/SCADA, MES, Oracle, MS SQL, and general controls. Strong project management and problem-solving skills. Ability to work onsite full-time; relocation and travel expenses are not reimbursed.

Job Title: Facilities Technician Company: AISIN North Carolina Department: Facilities The Facilities Technician is responsible for providing electrical and mechanical support to the plant facilities. This role troubleshoots and maintains industrial manufacturing facilities equipment as well as the outdoor grounds of the facility. Position Responsibilities The incumbent is expected to perform the following functions that the company has determined are essential to this position: Handle industrial electrical issues including changing light bulbs and working with 208, 277, 480-volt, 3 phase and 120-volt, single phase equipment. Install, repair, and troubleshoot industrial piping systems along with the ability to change out pumps and motors. Troubleshoot to determine malfunctions on equipment using knowledge of microprocessors, programmable controllers, and circuit analysis. Troubleshoot AC & DC Systems up to 480 volts. Record maintenance and repairs activities in a computer-based maintenance management system, fill out utility check sheets and other required check sheets. Run Wastewater treatment system. Check operating status of air compressors. Execute plumbing repairs such as clearing clogged fixtures, drains, and adjusting leaks. Clean out clogged pumps in the sump pumps system as well as troubleshoot and adjust level controls in the system. Repair manual and automatic doors, hinges, locks, and closers on personal doors. Make repairs to dock equipment and the well system. Review equipment check sheets for abnormal readings. Lead Team Members in light fixture replacement. Ensure that restrooms are in good working order. Identify and repair building issues. Assist in making safety related kaizens and repairs. Plan and implement Kaizens. Required Skills and Abilities Essential Skills and Experience: 2 or more years of experience in industrial maintenance. Knowledge of electrical equipment - 480/230v 3ph, 110&24 vdc controls, prints and schematics. Knowledge of hydraulics and pneumatics. Knowledge of Plant Fire Sprinkler Systems. Ability to reset faults in the following systems and equipment: ATF Supply System, Crane Systems, Fluid Coolers, Air Compressors. Ability to safely operate industrial moving equipment such as a scissor lift, forklift, and other equipment. Ability to troubleshoot and correct faults on Wastewater System. Electrical skills. Mechanical - general knowledge of machines, tools, measurement instruments, automation/robotics, maintenance, and repair. Repairing - repairing machines or systems using the necessary tools. Equipment Maintenance - performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Equipment Selection - determining the kind of tools and equipment needed to do a job. Math Skills - basic knowledge of mathematics. Education/Training/Certifications Associate degree in Electrical or Industrial Maintenance preferred. Travel Requirements Approximately 0 % Must be willing and available to travel to such locations and with such frequency as is necessary and desirable to meet business needs. Work Environment Requirements With reasonable accommodation: Must be able to operate a personal computer, telephone, and other office equipment. Must perform job duties onsite, when necessary, except those duties that are customarily or by their nature performed offsite (for example, offsite customer visits). Must be able to work effectively in a fast-paced environment. Must be able to work on multiple assignments at once, and complete assignments within deadline and budget (if applicable) with satisfactory quality. Must be able to operate as an effective team member. Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all company safety policies. Attendance/Work Hour Requirements Must maintain an acceptable attendance record. Must be willing and available to work weekends and holidays as necessary and desirable to meet business needs.

The role involves testing, troubleshooting, and repairing electrical equipment and systems, including circuits, relay logic, wiring, motors, servo drives, and various electronic components. The individual will support machine integration into production, ensure equipment safety, perform technical documentation, and participate in continuous improvement efforts. The position requires strong problem-solving skills and the ability to support engineering projects and production trials. Requirement/Must Have: Industrial maintenance experience in a manufacturing environment or experience with equipment installation and debugging. Experience with electrical and mechanical systems in an industrial setting. Technical experience with PLC programming, including reading, writing, and modifying logic. Technical experience with servo motion controllers. Technical experience with relay logic, wiring, and troubleshooting. Technical experience with robotics, including programming and troubleshooting. Experience with hydraulic or pneumatic troubleshooting and schematic reading. Availability to work overtime, holidays, weekends, and during shutdowns. Ability to travel domestically and internationally up to 30%. Experience: Experience in equipment testing, repair, and integration. Experience supporting machine production trials. Experience developing and maintaining schedules for assigned work areas or projects. Responsibilities: Test and repair electrical equipment and systems. Write, program, troubleshoot, modify, and repair PLCs, robotics, cameras, and other electronic systems. Troubleshoot and repair safety systems, hydraulic systems, pneumatic systems, and machine components. Plan and execute machine integration into mass production. Perform administrative documentation of work performed. Problem-solve and continuously improve safety, quality, and productivity. Develop detailed schedules for work areas or projects. Participate in engineering project planning. Support machine production trials at vendor sites. Certify equipment safety per applicable standards through safety integrity checks. Should Have: Ability to learn new processes quickly. Strong collaboration and communication skills. Skills: Strong technical and troubleshooting skills across electrical, mechanical, and electronic systems. Ability to read and interpret schematics. Strong organizational and documentation skills. Qualification And Education: Technical associate degree or higher preferred, or equivalent experience. Experience with production processes, including standardized work and job instruction sheets. Experience analyzing quality data from multiple sources. Experience with new plant or facility startup preferred. Experience in high-volume production environments is a plus.

We are seeking a skilled Automation Technician to join our team. This is a challenging and rewarding position that offers opportunities for growth and development. If you are a motivated individual with a passion for automation technology, we encourage you to apply for this position. Join our team and contribute to the success of our organization. SUMMARY: Support operations in the design, build, implementation, and maintenance of custom-built equipment and processes under the direction of the Manufacturing Engineer, mainly utilizing Automation Direct's PLC and software. Develop innovative and creative approaches for improvement in safety, quality, and productivity in processes and equipment. Occasional travel may be necessary. ESSENTIAL FUNCTIONS: Must be capable of following and meeting standard work requirements. Must be able to use computer programs to assist in recording data, making labels, obtaining prints and specifications, etc. Lead projects to improve equipment within the facility. Be able to continue to pursue future designs that will help Parker HPD move forward in leading-edge technology Troubleshoot equipment or PLC issues. Able to foster professionalism with all associates in order to obtain feedback and ideas to incorporate into improvements for the facility. Aide in the development of apprentices. DEPARTMENT SPECIFIC FUNCTIONS: Specify and order any materials required to create any approved project and document the final designs. This documentation must include items such as: blueprints, bill of materials, preventative maintenance standard work, etc. as required for continued support of the equipment Develop a spare parts stock strategy to organize and correctly account for that inventory and usage Develop safety practices that improve working conditions on equipment as needed and beyond OEM standards to ensure a safe Parker work environment in HPD plants Schedule equipment repairs or implementation with production control department. Other duties may be assigned at a later time Work safely in accordance with regulations, standards, and procedures in a manner that eliminates risk to health and the environment. Notify leadership of unsafe conditions or practices unlawful activities and activities that present unreasonable health and/or environmental risk. Report all safety and/or environmental incidents to leadership immediately. Participate in peer-based teams (i.e., Cross Functional Teams), and work with groups to initiate and implement programs such as Lean Manufacturing, 5S, and Total Productive Maintenance. QUALIFICATIONS: Education: High School diploma or GED Certified electrician preferred 2 years of trade school education preferred Desired 4 years of trade school education or certificate Experience: 5 years in a Manufacturing Environment Required Skills Good verbal and interpersonal communication skills Good math, reading and writing skills Proficient with Microsoft Office. Experience with Automation Direct's Productivity Suite Capable of wiring PLC and related components. Have working knowledge and understanding of pneumatic systems, hydraulic systems, and electrical equipment (systems up to 480 volts). Creative and out of the box thinker to visualize and construct equipment and/or make modifications that will improve safety and productivity for our processes and people. Preferred Skills 1. Experience with Codesys programming software. 2. Capable of writing training instructions, Standard Work instructions, and repair records. 3. Have working knowledge of the maintenance and functionality of various types of manufacturing equipment. 4. Have working knowledge and understanding of pneumatic systems, hydraulic systems, electrical equipment (systems up to 480 volts). 5. Strong programming knowledge in PLC's and HMI's. ORGANIZATIONAL RELATIONSHIPS/ SCOPE: Report directly to Manufacturing Engineer Work closely with other departments to resolve issues with the processes & equipment. Communicate with incoming shift of issues and needs. WORKING CONDITIONS: Work in areas where safety equipment will be required (steel toe shoes, eye protection, hearing protection) Standing is required for extended periods of time. Walking, pushing, pulling, reaching, bending, turning, twisting, squatting, and lifting is performed regularly Air-conditioned facility The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position. EQUAL EMPLOYMENT OPPORTUNITY: Parker is an Equal Opportunity and Affirmative Action Employer, committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency, or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. DRUG-FREE WORKPLACE: In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

The successful applicant will be performing work in FedRAMP High or IL-5 environments, and therefore, must be a U.S. Person (i.e. U.S. citizen, U.S. national, lawful permanent resident, asylees, or refugee). This position may also perform work that the U.S. government has specified can only be performed by a U.S. citizen on U.S. soil. What You'll Do As a team member of Cisco's Advanced Security Initiatives Group (ASIG), you will evaluate our global products and services to identify security vulnerabilities, weaknesses, and improvements. You will learn to adopt an attacker mentality using tools, techniques, and processes that emulate real-world adversaries. You will work with amazingly creative, innovative, and collaborative security researchers to develop evolving ethical hacking skills and networking product knowledge. You will partner with Cisco's industry-leading engineering teams to assess the latest system and application architectures, contribute to creative security solutions, and gain unparalleled access to and experience with the latest technologies. You will also have opportunities to research security topics independently or collaboratively to explore and develop tools and ideas as part of our "Free Friday" innovation and incubation process. Who You'll Work With Our security team is dynamic, hardworking, fun, and high-energy, but the work is done in a very casual environment that strongly encourages a work/life balance. Not only will you work alongside a team of skilled security researchers with a diverse spectrum of talents and experience levels, but you will also be interacting with a variety of engineering teams across Cisco. Cisco ASIG cultivates an environment where every individual's input and experience is valued. We prioritize training sessions and a mentor program surrounding you with the resources you will need to succeed. Who You Are Would you enjoy finding security flaws in critical systems, modeling prototype attacks that malicious actors might take advantage of, and crafting mitigations to thwart motivated and inventive adversaries? If you have a passion for computer security, enjoy solving exciting problems, and relish working with emerging technologies, Cisco wants you! Global ISPs, Fortune 500 companies, and world governments all depend on Cisco for critical infrastructure, and we want to guarantee that we keep delivering highly secured solutions to meet their needs. Minimum Requirements: 6+ years of red teaming or penetration testing experience with emphasis on remote access, network penetration, Command and Control development and use, and covert channels. 4+ years of exploit development (Offensive Programming) and cloud security. Bachelor's degree or equivalent experience in Computer Science, Engineering. MS/MBA preferred. 6+ years of Unix experience, including any applicable academic experience. 6+ years of technical leadership experience in security assessments Solid understanding of Python, Go, or a similar language. Must be able to code live. Preferred Requirements: 4+ years of experience with applied crypto, through implementation or analysis of crypto algorithms. 4+ years of experience with network protocols, through implementation or analysis. 4+ years of experience as a DevOps engineer. 4+ years of security testing experience, including areas like web applications, APIs, user interfaces, mobile devices, and embedded devices. 4+ years of other full-spectrum red-team tactics, such as hw hacking, physical security breach, targeted social engineering. 4+ years of experience in a SOC, SRE, or incident response role. 4+ years of Windows administration experience. Job Requirements: Preferred sites: Knoxville, Tennessee; Austin, Texas; or Research Triangle Park, North Carolina. Willing to consider remote. Why Cisco? #WeAreCisco. We are all unique, but collectively we bring our talents to work as a team, to develop innovative technology and power a more inclusive, digital future for everyone. How do we do it? Well, for starters - with people like you! Nearly every internet connection around the world touches Cisco. We're the Internet's optimists. Our technology makes sure the data traveling at light speed across connections does so securely, yet it's not what we make but what we make happen which marks us out. We're helping those who work in the health service to connect with patients and each other; schools, colleges, and universities to teach in even the most challenging of times. We're helping businesses of all shapes and sizes to connect with their employees and customers in new ways, providing people with access to the digital skills they need and connecting the most remote parts of the world - whether through 5G, or otherwise. We tackle whatever challenges come our way. We have each other's backs, we recognize our accomplishments, and we grow together. We celebrate and support one another - from big and small things in life to big career moments. And giving back is in our DNA (we get 10 days off each year to do just that). We know that powering an inclusive future starts with us. Because without diversity and a dedication to equality, there is no moving forward. Our 30 Inclusive Communities, that bring people together around commonalities or passions, are leading the way. Together we're committed to learning, listening, caring for our communities, whilst supporting the most vulnerable with a collective effort to make this world a better place either with technology, or through our actions. So, you have colorful hair? Don't care. Tattoos? Show off your ink. Like polka dots? That's cool. Pop culture geek? Many of us are. Passion for technology and world changing? Be you, with us! #WeAreCisco #STO24 #LI-AS3 Message to applicants applying to work in the U.S. and/or Canada: When available, the salary range posted for this position reflects the projected hiring range for new hire, full-time salaries in U.S. and/or Canada locations, not including equity or benefits. For non-sales roles the hiring ranges reflect base salary only; employees are also eligible to receive annual bonuses. Hiring ranges for sales positions include base and incentive compensation target. Individual pay is determined by the candidate's hiring location and additional factors, including but not limited to skillset, experience, and relevant education, certifications, or training. Applicants may not be eligible for the full salary range based on their U.S. or Canada hiring location. The recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees have access to quality medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, short and long-term disability coverage, basic life insurance and numerous wellbeing offerings. Employees receive up to twelve paid holidays per calendar year, which includes one floating holiday, plus a day off for their birthday. Employees accrue up to 20 days of Paid Time Off (PTO) each year and have access to paid time away to deal with critical or emergency issues without tapping into their PTO. We offer additional paid time to volunteer and give back to the community. Employees are also able to purchase company stock through our Employee Stock Purchase Program. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components. For quota-based incentive pay, Cisco pays at the standard rate of 1% of incentive target for each 1% revenue attainment against the quota up to 100%. Once performance exceeds 100% quota attainment, incentive rates may increase up to five times the standard rate with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid.

Location: Greensboro, NC | Full-Time Who We Are We are a trusted leader in the electrical construction industry, known for nearly a century of craftsmanship, safety, and integrity. Headquartered in Greensboro, NC, we've built a reputation for delivering complex, high-quality electrical projects across the Southeast with precision, innovation, and teamwork. Our culture emphasizes collaboration, mentorship, and continuous learning, creating an environment where talented professionals grow their careers while taking pride in the work they do every day. Position Summary We're seeking a QA/QC Technician to support project quality and performance through on-site inspections, documentation, and team coordination. This position plays a critical role in maintaining the company's high standards of consistency, accuracy, and safety. The ideal candidate has hands-on experience in electrical construction, a keen eye for detail, and the ability to communicate effectively across teams and job sites. What You'll Do Conduct field inspections of underground systems, temporary power, switchgear, and equipment installations Review project scopes and QA/QC expectations during kickoff meetings Collaborate with field teams, general contractors, and project managers to ensure compliance with company and client standards Use the QuickBase QA/QC App to record inspections, document issues, and manage nonconformance reports Verify torque and megger testing results and closeout documentation accuracy Promote best practices and consistency across projects Support administrative and documentation tasks as needed Travel to job sites, including occasional out-of-town projects What We're Looking For 5+ years of experience in electrical construction (Foreman or Superintendent experience preferred) Strong knowledge of electrical systems, QA/QC standards, and installation practices Proficient in Microsoft Office Suite and the QuickBase QA/QC App Excellent communication, organization, and reporting skills Comfortable performing physical inspections in active construction environments Dedicated to safety, quality, and teamwork Why You'll Love Working Here A company built on integrity, safety, and technical excellence Collaborative, mentorship-driven culture with advancement opportunities Work on diverse, high-profile projects across multiple industries Competitive pay, benefits, and ongoing professional training If you're ready to join a respected team that values craftsmanship, accountability, and innovation - apply today and help us build what lasts.

Morrisville, NC Responsibilities: Able to Understand, Retain, and effectively apply On the Job training instruction Consistently follow processes and procedures to operate compliantly within a controlled environmental manufacturing space Read and Understand Assembly drawing and assembly instructions to correctly and efficiently assemble products Distinguish differences in sub-component parts based on part number and visual inspection Perform in-process inspections per applicable specifications or work orders, including inspection of input and output materials, packaging integrity Performs labeling and packaging activities Consistently adhere to assembly methodology of accept / reject criterion Interact with Quality Assurance personnel to ensure product quality and address any non-conformity detected Report problems with quality, processes, equipment, or materials to the Team Lead and or Supervisor Utilize approved tools and fixtures as required in a safe and efficient way Complete line clearance, scrap records, training records, and other documentation as required Maintain batch records for traceability purposes in accordance with company documented standards Maintain a clean and organized work area to facilitate manufacturing functions Other duties as assigned by the Supervisor and or Team Lead Essential Functions Ability to read and comprehend procedures written in English Ability to complete paperwork accurately in English Ability to work safely around chemicals and equipment Ability to stand or sit for long periods of time Ability to do repetitive work, requiring strong dexterity and hand/eye coordination Ability to lift up to 40 lbs Desired Education & Experience: High school diploma or equivalent Previous Work experience within a controlled environmental space preferred Previous assembly experience preferred Ability to lift up to 40 lbs Work Environment: • Work is normally performed in a climate-controlled office environment and throughout a heated manufacturing and warehouse facility • The noise level in the work environment is usually low to moderate

Role: Slalom Flex (Project Based) - Technical Engineer (Pega) Who You'll Work With Our teams help organizations of all kinds redefine what's possible, give shape to the future - and get there. We focus on high-impact projects, meeting our clients where they are to uncover business needs and deliver results. Our teams go beyond the expected to help clients move confidently through ambiguity and risk and drive more transformative outcomes. The Technical Engineer with strong Pega expertise will focus on designing, building, and optimizing enterprise workflows on the Pega Platform, ensuring high performance, security, and scalability. What You'll Do * Design and Build: Develop case types, flows, UI rules, and data models on Pega Platform (v7.x / v8.x). * Integrations: Implement and troubleshoot integrations (REST, SOAP, APIs, MQ, databases). * Performance & Security: Conduct performance tuning and enforce security/access control best practices. * Collaboration: Work within Agile/Scrum teams, partnering with business analysts, QA, and DevOps. * Consulting Excellence: Translate business requirements into technical solutions and provide clear recommendations to stakeholders. What You'll Bring * Strong expertise in Pega Platform (v7.x / v8.x). * Proven experience as a Technical or Lead Pega Architect on large-scale implementations. * Deep understanding of: * Case Management, Flows, and UI rules * Data modeling and decisioning * Pega performance tuning and optimization * Security and access control * Hands-on experience with integrations (REST, SOAP, APIs, MQ, databases). * Experience with Agile/Scrum methodologies. * Experience with Pega migrations and upgrades. * Pega certifications such as: * Pega Certified Lead System Architect (CLSA) * Pega Certified Senior System Architect (CSSA) * Familiarity with cloud platforms (AWS, Azure, or GCP). * Exposure to DevOps tools and CI/CD pipelines. * Experience in regulated industries (Financial Services, Healthcare, Insurance). * Consulting experience. About Us Slalom is a fiercely human business and technology consulting company that leads with outcomes to bring more value, in all ways, always. From strategy through delivery, our agile teams across 52 offices in 12 countries collaborate with clients to bring powerful customer experiences, innovative ways of working, and new products and services to life. We are trusted by leaders across the Global 1000, many successful enterprise and mid-market companies, and 500+ public sector organizations to improve operations, drive growth, and create value. At Slalom, we believe that together, we can move faster, dream bigger, and build better tomorrows for all. Compensation and Benefits Slalom prides itself on helping team members thrive in their work and life. As a result, Slalom is proud to invest in benefits that include meaningful time off and paid holidays, parental leave, 401(k) with a match, a range of choices for highly subsidized health, dental, & vision coverage, adoption and fertility assistance, and short/long-term disability. We also offer yearly $350 reimbursement account for any well-being-related expenses, as well as discounted home, auto, and pet insurance. Slalom is committed to fair and equitable compensation practices. For this position, the hourly pay range is $65 to $90/HR depending on experience. Actual compensation will depend upon an individual's skills, experience, qualifications, location, and other relevant factors. The hourly pay range is subject to change and may be modified at any time. EEO and Accommodations Slalom is an equal-opportunity employer and is committed to attracting, developing and retaining highly qualified talent who empower our innovative teams through unique perspectives and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans' status, or any other characteristic protected by federal, state, or local laws. Slalom will also consider qualified applications with criminal histories, consistent with legal requirements. Slalom welcomes and encourages applications from individuals with disabilities. Reasonable accommodations are available for candidates during all aspects of the selection process. Please advise the talent acquisition team if you require accommodations during the interview process. We will accept applications on an ongoing basis through January 23, 2026

Working at Freudenberg: We will wow your world! Responsibilities: Monitor and control the production process to ensure optimal efficiency and quality output Ability to set-up production line for start-up as well as all style changes required Monitor material specifications and make required adjustments to produce first quality material Inspect and observe line function from raw material input to quality material output, identifying deviations in process and/or equipment and communicating issues to maintenance or management Conducts regular quality inspections to identify any deviations or issues in the production process Practice lean manufacturing principles to drive continuous improvement and operational excellence Demonstrates a deliberate focus on safety, quality, continuous improvement Performs other job duties as assigned Qualifications: High school diploma or equivalent; technical degree or certification preferred Manufacturing experience with preference in plastics extrusion, nonwovens or paper manufacturing. Excellent teamwork and communication skills Strong attention to detail and ability to follow procedures Excellent problem-solving skills Experience entering information into production database as well as ERP system Must be able to read a ruler and understand fractions, and demonstrate basic math skills Must be able to work well with others and in a diverse workforce environment Forklift experience required. Ability to lift and/or move up to 50 pounds Prolonged periods of standing Ability to sit, stand for the majority of the shift The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Performance Materials LP (USA)

Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technician Aides to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materials-including soil, concrete, and masonry-in accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance with project specifications and documenting field results accurately and clearly. The position requires physical stamina, attention to safety protocols, reliable transportation, and the ability to obtain industry certifications such as ACI, ICC, and OSHA. Successful candidates will demonstrate a commitment to quality, safety, and professionalism while working in dynamic construction environments. Requirements Education: Engineering technicians must have a high school diploma or the GED high school equivalency credential. Certification: Engineering technicians will obtain and maintain relevant ACI, ICC, and OSHA certifications, as well as other certifications as deemed appropriate by their supervisor. Pre-employment Requirements: Drug Testing: All job applicants will undergo testing for the presence of illegal drugs as a condition of employment. All employees will follow Geo-Hydro Engineers' Drug Free Workplace Substance Abuse Policy. Driving Record: Engineering technicians will have a valid driver's license with no violations that prevent them from being insured through the company's insurance carrier. The ability to be insured is at the discretion of the company's insurance carrier. The insurance carrier routinely reviews employee's driving records and may determine at any time than any employee will no longer be permitted to operate any company vehicle. Job Responsibilities and Requirements: Observation: Engineering technicians must be able to observe construction work for compliance with applicable project drawings and specifications, and for general accordance with International Building Code requirements. Testing: Engineering technicians must be able to perform field and laboratory testing of soil, stone, concrete, grout, masonry, and other construction materials in accordance with ASTM standards. Applicable ASTM standards include but are not limited to the following: D-698, D-1557, D-1556, D-2937, D-2216, D-6938, C-31, C-143, C-173, C-231, and ASTM STP 399. Documentation: Engineering technicians document field observations and test results by writing legibly in English with proper grammar. Basic mathematics (addition, subtraction, multiplication, and division) is an integral part of all testing and reporting. Safety: Engineering Technicians must wear appropriate personal protection equipment (PPE), attend safety training sessions, and follow the requirements within the Geo-Hydro Safety and Health Manual. Physical Requirements Lifting: Must be able to lift, load and unload soil, sand, asphalt, CMU, and concrete samples weighing up to 100 pounds. Concrete Sampling and Testing: Must be able to maneuver a 6-cubic foot wheelbarrow loaded with 150-200 pounds of fresh concrete for up to 50 yards over uneven ground. Unit weight testing requires lifting a 50-pound container of concrete. Six-inch compressive strength test cylinders weigh 30 pounds each. Volumetric air content testing requires repeated swinging of the 30-pound concrete-filled test device from knee-level to head-level. Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel. Must be able to load and unload a 90-pound case containing a nuclear density gauge and carry the 50-pound nuclear density gauge by hand for up to 50 yards over uneven ground. Hand Auger and Penetrometer: Must be able to manually hand auger down to 10 feet into soil to obtain samples and perform portable dynamic cone penetrometer testing. The hand auger may require up to 50 pounds of pull to remove it from wet soil conditions. The total weight of the dynamic cone penetrometer ranges from 20 to 40 pounds. Operation of the penetrometer requires repeated raising and dropping of the 15 pound slide weight.

Job Posting: Exciting Opportunity for Electronic Technician Company Overview: Join the forefront of innovation at JTI Liggett, where we lead the charge in high-speed manufacturing excellence within the tobacco manufacturing industry. We pride ourselves on pushing technological boundaries and delivering unparalleled quality and efficiency. As a member of our team, you'll be instrumental in shaping the future of manufacturing. Position: Electronic Technician Location: Mebane, NC Job info: $44.96/hour; 6% 401k match; 5 days PTO Job Type: Full-time (40 hours, including paid lunch breaks, 8-hour shifts); Overtime available (Time and a half paid for hours worked over 8 in a day; double time paid after 12 hours worked in a day) Job Description: Are you ready to take on a pivotal role as an Electronic Technician in our dynamic production environment? At JTI Liggett, you will be at the heart of maintaining and optimizing our cutting-edge manufacturing equipment. Your expertise in electronics will ensure our systems run smoothly, maximizing productivity and reliability to meet our ambitious goals. Exciting Responsibilities Await: Install, maintain, and enhance electronic components and systems on our advanced high-speed manufacturing equipment. Troubleshoot and diagnose electrical and electronic issues, implementing effective solutions to minimize downtime. Tackle complex electrical challenges, including converting systems from 480V AC to 24V DC, to support diverse operational needs. Collaborate closely with our engineering and production teams to implement innovative upgrades and improvements that set new industry standards. Conduct meticulous preventive maintenance routines to uphold peak performance and minimize downtime. Document your contributions with precision in our state-of-the-art maintenance tracking systems (CMMS), ensuring a transparent and efficient workflow. What We're Looking For: An innovative thinker with an Associate's Degree in Electronics Technology, Electrical Engineering Technology, or a related field, or equivalent practical experience. Demonstrated expertise (5 years or more) as an Electronic Technician in a high-speed manufacturing environment, with a passion for leveraging technology to drive operational excellence. (A combination of education and experience will be considered.) Proficiency in deciphering electrical and electronic schematics and technical manuals, coupled with a hands-on approach to troubleshooting and problem-solving. Flexibility to thrive in a dynamic work environment, including availability to work 1st, 2nd or 3rd shift to support our around-the-clock operations. Why Join Us? At JTI Liggett, you'll be part of a vibrant culture that values collaboration, growth, and innovation. We offer competitive compensation packages, comprehensive benefits, and opportunities for professional development. Join us and be part of a team that's reshaping the future of manufacturing technology. Ready to Make Your Mark? If you're energized by the prospect of contributing to groundbreaking advancements in manufacturing technology, we invite you to apply online today at Electronic Technician - Mebane, NC Job Details | JT International S.A. Come join us at JTI Liggett, where your skills will be valued, and your career will thrive in an environment that celebrates creativity and excellence. JTI Liggett is an equal opportunity employer committed to fostering an inclusive and diverse workplace environment.

**City** Greensboro **Role Type** Permanent **WHO WE ARE** ITG Brands is the third-largest tobacco company in the USA with offerings of some of the most well-known cigarette, cigar, and e-vapor brands. As a member of the globally recognized Imperial Brands PLC family, we are a forward-thinking partner with operational integrity. ITG Brands is committed to putting consumers at the center of what we do, while creating an innovative workplace where inclusion, creativity, and bold thinking drive progress. This empowers us to bring our true selves to work, to collaborate more effectively through showing our passion and being confident to bring new ideas to the table. We are not afraid to seize opportunities and make things happen - both individually and collaboratively. We strive to exceed expectations by seeing things differently and doing things differently. This truly is a place where we all share a challenger mindset which drives our success. **What You Will Do** - JOB SUMMARY + Install electrical service and control devices to equipment using the standards set by the National Electrical Code (NEC). + Install and maintain facility power distribution systems (i.e., medium voltage switchgears, generators, transformers, buss duct and panelboards). + Install, test, maintain, diagnose, and correct problems in the various electrical, electro mechanical, electronic, pneumatic and hydraulic systems associated with cigarette manufacturing equipment (i.e., high speed automation, instrumentation, control wiring, microprocessor controls, PLC controls and communication networks, such as SLC500, TI, ControlLogix, CompactLogix, Semiens S7-300 and S7-400 and Twin CAT control systems). + Read and understand complex electrical schematics and ladder logic. + Follows company safe work practice guidelines. **Qualifications** - REQUIRED MINIMUM QUALIFICATIONS: + Be at least 21 years of age + Be legally eligible to work in the United States + Candidates must have completion of an approved apprenticeship program or be a trade school graduate with a minimum of 5 years related electrical/electronic experience. + Candidates with equivalent U.S. military training and related electrical/electronic experience will also be considered. + Must be able to work any of 3 shifts and overtime, including weekends and holidays as necessary. + Candidates will be required to pass a sample shop test. **Work Environment and Physical Demand** + Work in areas that are subject to noise, dust, vibration, and heat. + Sometimes required to do heavy lifting + Work in a variety of positions including awkward positions + Climb ladders and work at heights Safety is more than a priority at ITG Brands, it is a core value. We are committed to employee health, safety and well-being and a secure work environment. We strive to achieve and maintain compliance with the principles of sound environmental, industrial hygiene and safety management. ITG Brands is committed to safety by complying with federal, state, local, and corporate regulations; assessing risks and implementing appropriate safety measures; providing training; and leveraging technology through a behavior-based approach. ITG Brands fosters a culture of care and promotes a safe working environment because we care about our employees. Communication and teamwork are key principles used to develop and advance a positive atmosphere that attracts and retains top talent. **What We Offer** - Competitive benefits package that includes medical/dental/vision/life insurance/disability plans - Dollar for dollar 401k match up to 6% - 15 Company-paid holidays - Generous paid time off - Employee recognition and discount programs - Education assistance **Applicant Information** This describes the essential functions of the job at the time the was created, but it is not an exhaustive list of tasks, duties and responsibilities. In addition, the position may evolve or change over time and such changes may not be reflected in the job description until it is next updated. **Field 7** **ITG Brands and ITG Cigars provides equal employment opportunities.** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you have a concern about discrimination in the application or hiring process or you need an accommodation based on religion, disability or pregnancy in the application or hiring process, please contact us at ******************************* . **SHARE THIS JOB** The posting for the position for which you are applying highlights key aspects of the position only. It is not a complete description of the position. All candidates must consent to an independent investigation of their background, references, past employment, education, criminal record, and drug screening. Results of such background checks will be reviewed on a case-by-case basis, giving consideration to the nature of the information reported and its relevance to the specific job being sought before a decision is made using this information. ITG Brands and ITG Cigars provides equal employment opportunities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you have a concern about discrimination in the application or hiring process or you need an accommodation based on religion, disability or pregnancy in the application or hiring process, please contact us at ******************************* (Talen%74Acquisition%40%69t%67b%72ands.%63om) . We collect personal information from you in connection with your application for employment with ITG Brands or ITG Cigars. For more information, please see our Privacy Policy (****************************************** . If you are a job applicant from California, additional information can be found on our California Applicant Privacy Notice (******************************************************* . If you have questions, contact us atprivacy@itgbrands.com (priv%61%63y@i%74gb%72ands.co%6D) .

Job Description: The Electronic Technician III performs intermediate- and depot-level maintenance on complex electronic systems and subsystems supporting TADSS operations. Responsibilities include fault isolation, component-level troubleshooting, preventive maintenance, and system documentation. Key Responsibilities: Maintain and repair advanced electronics and computer-controlled subsystems Conduct preventive maintenance, diagnostics, and calibration Record maintenance actions using DA 2408 forms and enter data in ISTS and/or Maximo Support periodic inspections, updates, and scenario management Comply with FTR and support PMCS travel if directed Communicate effectively with government site leads, peers, and other representatives Maintain accountability of CFE/GFE and ensure compliance with safety and cybersecurity policies Minimum Qualifications: 5+ years of experience in electronics maintenance or simulation systems Proven ability to troubleshoot and repair down to the component level Familiarity with Army maintenance systems and documentation procedures Must meet the classification criteria for CBA-covered Electronic Technician III Security+ or related IT/cyber certification preferred (not required for this TDL)

Job DescriptionBenefits: Dental insurance Health insurance Paid time off Vision insurance Are you interested in working for a company that makes a difference in peoples lives? Do you want to work for a company that values its employees and supports professional development? Joining the Prism Specialties Team Provides: Teamwork: Experience what it is like to work in a team environment surrounded by people who support and encourage you along the way Learning & Development: Develop your skill set within the company by increasing your knowledge and experience in the world of electronics restoration A Day in the Life of a Consumer Electronics Technician May Include: On-site evaluation and/or restoration of damaged electronics from insurance claims involving fire, water, or lightning strike damage Inventory, remove and/or transport electronic items and appliances from the insureds home or business Disassemble and evaluate electronic items to be cleaned, serviced, and/or repaired Test, clean, restore, and reassemble electronic items to pre-loss condition Deliver and reinstall appliances and consumer electronic items within the insured home or business What We are Looking for in You: Self-motivated and ability to potentially lead a team Excellent customer service skills; provide "white glove" service for our clients Solid multi-tasking ability, prioritizing skills, and attention to details Consistently exhibit empathy and compassion Comfortable working on-site in post-peril (fire, floods, etc.) environments Ability to lift and carry 50 pounds during pick-up and delivery activities Prism Specialties specializes in the restoration of electronics, art, textiles, and documents for residential and commercial insurance claims.

This Technician will troubleshoot, repair and or install approved job material and equipment within project time and budget constraints and quality standards as required to meet customer requirements. is a traveling position for the east coast. Candidate will need to perform physical labor. They will install security electronics and networking equipment. Candidate will be located on a customer site and will perform jobsite housekeeping. Will need to follow written and verbal instructions provided from immediate supervisor and customers without constant supervision. Needs to adhere to company policies and guidelines. Safeguard all tools and company equipment in their care. Report unsafe acts or conditions on a jobsite immediately. Follow all safety procedures as set forth by general contractor or OSHA, whichever set the strictest guidelines. Position involves troubleshooting, repair, and installation of integrated security mechanical and electronic systems, to include but not limited to the following: CCTV equipment, analog and digital IP based systems Intercom / Audio systems Electronic locking systems Card access control equipment Relay logic and PLC based control Repair and maintenance of mechanical locking devices, panic hardware, detention hardware Familiarity with file structure in PC based controls REQUIREMENTS: 1. Education Required: High School Diploma or GED equivalent Preferred: Associates degree in construction or electronics technology 2. Licensing/Registration/Certification Required: Local certifications as required by work area Must pass criminal background checks 3. Experience 4. On call rotation requirement Required: 1 or more years in the installation of low voltage communication systems or security and/or detention equipment. EOE/M/F/Veteran/Disabled

Benefits: Dental insurance Health insurance Paid time off Vision insurance Are you interested in working for a company that makes a difference in people's lives? Do you want to work for a company that values its employees and supports professional development? Joining the Prism Specialties Team Provides: Teamwork: Experience what it is like to work in a team environment surrounded by people who support and encourage you along the way Learning & Development: Develop your skill set within the company by increasing your knowledge and experience in the world of electronics restoration A Day in the Life of a Consumer Electronics Technician May Include: On-site evaluation and/or restoration of damaged electronics from insurance claims involving fire, water, or lightning strike damage Inventory, remove and/or transport electronic items and appliances from the insured's home or business Disassemble and evaluate electronic items to be cleaned, serviced, and/or repaired Test, clean, restore, and reassemble electronic items to pre-loss condition Deliver and reinstall appliances and consumer electronic items within the insured home or business What We are Looking for in You: Self-motivated and ability to potentially lead a team Excellent customer service skills; provide "white glove" service for our clients Solid multi-tasking ability, prioritizing skills, and attention to details Consistently exhibit empathy and compassion Comfortable working on-site in post-peril (fire, floods, etc.) environments Ability to lift and carry 50 pounds during pick-up and delivery activities Prism Specialties specializes in the restoration of electronics, art, textiles, and documents for residential and commercial insurance claims. Compensation: $19.00 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Restoration Specialties Corporate.

Sirius Staffing is seeking an Electronic Technician for a role in Whitsett, NC. Schedule: Monday-Thursday, 6:00 AM-4:00 PM Overtime: Fridays, 6:00 AM-4:00 PM Pay: $21.00/hour This is a hands-on manufacturing support role for someone who likes working on the production floor, troubleshooting issues, and supporting electronics builds. You'll help keep electronics manufacturing lines running smoothly by inspecting products, supporting test and debug activities, assisting with new product launches, and helping document and improve processes.You'll work closely with engineering, quality, and production teams and spend most of your time on the floor, at test stations, or reviewing data, not behind a desk all day. What You'll Do Day-to-Day Support electronics assembly and test processes on the manufacturing floor Perform visual and physical inspections of electronic assemblies (PCBs, cables, sub-assemblies) Assist with basic troubleshooting and failure analysis when products fail test Help introduce new electronic products into production and support early builds Collect production and test data to identify trends, defects, or process issues Perform time and motion studies to help improve line flow and efficiency Help update and maintain: Work instructions Test procedures Training documents Line layouts (AutoCAD experience is a plus) Assist with Bill of Materials (BOM) updates and Engineering Change (EC) tracking in SAP or similar systems Participate in continuous improvement projects focused on quality, yield, and throughput Support root cause investigations using basic quality tools (5 Whys, Fishbone, 8D support) Nice-to-Have / Plus Skills Basic Python or scripting experience (used for data analysis, test data review, automation, or reporting) Experience pulling, cleaning, or analyzing manufacturing or test data Familiarity with electronics test equipment (multimeters, oscilloscopes, power supplies) Exposure to manufacturing execution systems (MES) or test systems Qualifications Education: Associate or Bachelor's degree in: Electronics Engineering Technology Electrical Engineering Technology Manufacturing or Industrial Technology Computer Engineering Technology Or a related technical field Experience: 1-3 years in electronics manufacturing, test, quality, hardware support, or engineering technician roles preferred Skills: Comfort working hands-on with electronic hardware Basic understanding of quality and process improvement concepts (PDCA, FMEA, 8D) Lean or Six Sigma exposure is a plus (certification not required) Strong attention to detail and willingness to learn Sirius Staffing is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to characteristics such as race, color, national origin, religion, gender, age, marital status, disability, veteran status, citizenship status, sexual orientation, gender identity, or any other status protected by law.

Qualifications: Here's What You'll Need: • Associate's degree in Design Technology or related discipline (or equivalent experience). • 5+ years of piping design experience in industrial or commercial facilities. • Proficiency in AutoCAD Plant 3D or Revit for piping design and modeling. • Solid understanding of piping design basics and familiarity with equipment layout. • Ability to interpret piping specifications and apply them to design. • Strong organizational skills and attention to detail. • Effective communication skills for coordination with multi-discipline teams. Ideally You Will Have: • Bachelor's degree in Mechanical Engineering or related discipline. • Experience in pharmaceutical, biotech, or advanced manufacturing facilities. • Familiarity with pipe stress considerations and integration with design. • Ability to assist in specification management and QA/QC workflows. • In addition to AutoCAD Plant 3D or Revit, Hexagon SmartPlant 3D experience. • Exposure to global workshare execution and collaborative design environments. Responsibilities: What You'll Do: • Develop piping layouts and routing using AutoCAD Plant 3D or Revit. • Apply piping design fundamentals, including pipe sizing, routing, and coordination with other disciplines. • Assist with facility equipment layout to ensure efficient and safe designs. • Review vendor drawings and incorporate equipment data into piping models. • Understand project scope and identify potential changes that impact design hours or deliverables. • Support development of person-hour estimates for assigned tasks. • Collaborate with global teams to ensure successful workshare execution. • Maintain compliance with client's standards, procedures, and quality expectations. Comments/Special Instructions Position requires 40% of in-office at Cary location (2 of 5 days)