Engineering technician jobs in Florida - 3,324 jobs

Under general supervision, the Quality Systems Technician manages quality activities by performing the following duties personally or through others to satisfy the customer and drive continuous improvement. C Shift Starting Hourly Rate is $ Responsibilities - Participates in Cross Functional team meetings to identify root causes and implement corrective action of quality issues. - Utilizes various measurements and tests equipment to perform capability studies; documents process performance as required. - Develops and maintains work-in-process and finished goods quality audits. Ensures audits reflect most up to date customer issues. - Recommends improvements to processes, products, and documentation to drive improvement and satisfy the customer. - Monitors manufacturing process to ensure compliance with established work instructions, process audits, and quality checklists on a regular basis. - Develops and makes visual displays depicting good and bad parts, acceptable and unacceptable metal. - Quarantines and oversees disposition of non-compliant material and devises methods to assess cost and responsibility. - Works with suppliers to help resolve non-compliant material issues and make recommendations for improvement and provides feedback as necessary. - Manages documents related to production inspections, calibration and capability as defined in quality plans. - Provides training to production workers on audits, inspections, and calibrations as required. - Understands supplier and customer testing and quality plans as required. - Understands of Engineering Change Orders and Temporary Deviation processes. - Inspect parts for conformance before shipping, remediate defects when possible and help identify root cause and corrective actions when parts are found to be outside of standard. Supervisory Responsibilities Mentor and lead co-workers in Quality Systems Department and in production. Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - Usual office environment with frequent sitting, walking, and standing, and occasional climbing, stooping, kneeling, crouching, crawling, and balancing. - Frequent use of eye, hand, and finger coordination enabling the use of office machinery. - Oral and auditory capacity enabling interpersonal communication as well as communication through automated devices such as the telephone. - Work in air-conditioned office environment and unacclimatized plant environment Travel Requirements Ability to travel occasionally domestically. Occasional: activity exists less than 1/3 of the time. Frequent: activity exists 1/3 and 2/3 of the time. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - In-depth knowledge of PGT manufacturing processes and products - Ability to work independently with limited guidance from supervisor - Familiar with the use of standard measurement and test equipment - Ability to read and interpret prints and complex procedures - Excellent record keeping and documentation skills - Working knowledge of word processing, spreadsheets and presentation software Experience degree preferred LANGUAGE / COMMUNICATION SKILLS Strong written and verbal communication skills Can communicate well with customers, suppliers, workforce and management Mathematical Skills Trigonometry, geometry, addition, subtraction, multiplication, division, averaging, percentages, and common algebra Reasoning ability - Able to coordinate multiple projects and areas of responsibility through priority setting - Strong problem solving skills - Ability to document a plan and delegate responsibility to drive corrective action/results Quality Technician Certification desired What We Offer Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. - Three comprehensive Medical plan options Prescription Dental Vision - Company Paid Life Insurance - Voluntary Life Insurance - Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance - Company-paid Short-Term Disability - Company-paid Long-Term Disability - Paid time off (PTO) and paid Holidays - 401k retirement plan with company match - Employee Assistance Program - Teladoc - Legal Insurance - Identity Theft Protection - Pet Insurance - Team Member Discount Program - Tuition Reimbursement - Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

Role - Electro-Mechanical Technician Salary - $80,000 - $100,000 per year (dependent on experience) Type - Permanent My client is a well-established machinery manufacturer specializing in the design and build of automated production equipment. They are looking to add an experienced Electro-Mechanical technician to their team to support the assembly, testing and installation of complex industrial systems. This is a hands-on, workshop-based role working closely with mechanical, electrical, and controls engineers to build high-quality automated machinery from start to finish, including installation on customer sites throughout the US. The Electro-Mechanical Technician will have the following attributes: 3+ years of experience in electro-mechanical assembly for industrial or automated machinery. Strong mechanical aptitude with the ability to assemble precision components and subassemblies. Skilled in electrical wiring, cable routing, and connecting motors, sensors, and control panels. Familiar with pneumatic components, actuators, and related systems. Able to read and interpret mechanical drawings, wiring diagrams, and schematics. Competent in the safe use of hand tools, power tools, and basic electrical test equipment. Organized, detail-oriented, and committed to high-quality workmanship. Comfortable collaborating with engineers and technicians in a team-based environment. The Electro-Mechanical Technician's role will involve: Assembling mechanical and electrical components to build automated machinery and systems. Wiring electrical panels, sensors, and pneumatic circuits to specification. Performing functional tests, mechanical alignments, and assisting with troubleshooting. Supporting system integration and machine validation alongside the engineering team. Maintaining accurate build documentation and following established quality procedures. Contributing to continuous improvement initiatives across the assembly process. For more information about this Electro-Mechanical Technician opportunity, please apply, or email Jack Smillie at *******************, who will be able to provide more details on the position. Many thanks, Premier Group

A healthcare staffing firm is seeking talented Neurosurgeons to join an established neuroscience program in Gainesville, Florida. This opportunity offers a competitive compensation package, flexible benefits, and access to advanced robotic surgical technology in a full-service, 510-bed medical center. The position includes shared call responsibilities and a diverse practice involving both general and cranial neurosurgery. #J-18808-Ljbffr

Jackson Health System Department: IT-Business Intelligence Shift details: Full-Time, Days, Monday-Friday Hybrid and Onsite twice a week Why Jackson: Jackson Health System is a nationally and internationally recognized academic medical system offering world-class care to any person who walks through our doors. For more than 100 years, Jackson has evolved into one of the world's top medical providers for all levels of care, no matter if it's for a routine patient visit or for a lifesaving procedure. With more than 2,000 licensed beds, we are also proud of our role as the primary teaching hospital for the University of Miami Miller School of Medicine. Here, the best people come together to deliver Jackson's mission for our diverse communities. Our employees are committed to providing the best CARE by demonstrating compassion, accountability, respect, and expertise in everything we do. Position Summary: The Senior Business Intelligence Engineering serves as a technical lead and ensures the delivery of high-quality data solutions to support data-driven decision-making across the organization. Collaborates closely with both the IT Data Engineering team and various business departments to ensure data is delivered efficiently and effectively for reporting and analysis. Duties & Responsibilities: Serves as a technical lead and mentor a team of BI Engineers in the development and maintenance of BI solutions. Provides technical guidance and expertise on data warehousing, ETL processes, and BI tools. Designs and implements complex data pipelines and data models in cloud based data platforms like Snowflake and on-premises environments like MSSQL. Collaborates with Data Engineering to define and enforce data quality standards. Works closely with business stakeholders to gather requirements and translate them into technical solutions. Leads the development and implementation of BI best practices and standards. Contribute to data governance initiatives and ensure compliance with data security policies. Responsive to emails and calls/texts within a reasonable amount of time. Is attentive to ongoing issues or questions and replies back consistently. Ensures team members are replying and following up on correspondence. Takes initiative to intervene in issues that may arise. Works proactively to ensure department best practices are followed. Intervenes when observing improper procedure or practices. Performs other related duties as assigned. Required Qualifications: Experience: Generally requires 3 to 5 years of related experience. Cloud-based data warehousing experience such as Snowflake, Azure, AWS, or similar highly preferred. Data Visualization experience such as Tableau or similar highly preferred. Education: Bachelor's degree in Computer Sciences or related field is required. Credentials: Valid license or certification is required as needed, based on the job or specialty. Jackson Health System is an equal opportunity employer and makes employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, age, or any other status protected by law.

Repairs and maintains, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instruments. Observes mechanical devices in operation and listens to their sounds to locate causes of trouble.

Performs the set-up, calibration, and testing of circuits, components, instruments and electromechanical assemblies. Works from diagrams, written and verbal descriptions, layouts or defined plans to test, diagnose and troubleshoot assemblies and/or final systems including fault isolation on systems and equipment. Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs, digital multimeters, signal generators and specialized test apparatus in the diagnostics and testing of assemblies. May assist in the selection and set-up of specialized test equipment. May assist with root cause analysis of product failure modes. May perform simple repairs or component removal or replacement. Experience Requirement • Ensure compliance with all safety and regulatory requirements. • Quality minded/focused individual. • Performs visual inspection of components before assembly or test. • Perform self-inspection of work completed before moving to the next step. • Ability to navigate through computer and test software • Knowledge of basic electronics theory. • Ability to identify electronic components, their function, and proper placement on a PCB. • Experienced with Test equipment, including DMM (Digital Multi Meter) and oscilloscope • Experience in troubleshooting of failed units. • Maintain accurate and organized documentation and ensure clarity, consistency, and compliance with the company's CMS standards. • Must be a self-starter with the ability to complete assignments on time. • Team member/leader experience on quality, delivery, or cost project(s) is a plus. • Knowledge and experience in 6S and process improvement • Maintains a clean and orderly work area. • Ability to work in a fast-paced environment. • Able to work overtime as required. • Experience in an ISO/FDA/FAA work environment. • Flexible with work assignments. • Other duties as assigned by the team leader/manager. Must demonstrate strong decision-making and leadership skills. • Experience in handling delicate components using ESD practices. • Must have good hand and eye coordination. • AS in Electronic Technology but not required, or 2 years of equivalent experience Physical Requirement Performing General Physical Activities - Sitting for long periods of time. Performing physical activities that require considerable use of your arms and legs and occasionally moving your whole body repeatedly, such as walking and balancing. May be able to lift a maximum of 55 lbs. Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things in a certain order or pattern according to a specific rule or set of rules. The ability to see details at close range (within a few feet of the observer). Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Title: Quality Control Technician/Inspector - Concrete Industry Company: DZ Corporation Employment Type: Full-Time About Us: DZ Corporation is a trusted name in the concrete industry, committed to delivering high-quality products and services. We are currently seeking a dedicated and detail-oriented Quality Control Technician/Inspector to join our team in The Villages, FL. Responsibilities: Inspect and test concrete samples to ensure compliance with industry standards and project specifications. Conduct pre-pour and post-pour inspections of forms, molds, and reinforcement placement. Perform wet and hardened concrete testing (e.g., slump, air content, compressive strength). Monitor curing processes and verify proper procedures are followed. Maintain accurate documentation of inspections, tests, and corrective actions. Communicate with production teams and suppliers to resolve quality issues. Ensure compliance with safety and environmental regulations. Assist in developing and improving quality control procedures. Conduct audits of batch plants and material suppliers. Qualifications: High school diploma or equivalent; technical training or associate degree in construction or materials science is a plus. 2+ years of experience in concrete quality control or inspection. Familiarity with ACI, ASTM, and NPCA standards. ACI Certification (Field Testing Technician Grade I) preferred. Strong attention to detail and problem-solving skills. Ability to work independently and as part of a team. Basic computer skills for data entry and reporting. Benefits: Competitive salary based on experience. Health, dental, and vision insurance. Paid time off and holidays. Opportunities for professional development and certification. Supportive team environment.

A Snapshot of Your Day Will be working with molds and the shell system, monitoring all production specifications to produce parts of exceptional quality at the Gibsonton Florida Location. How You'll Make an Impact Inputs mold into Shell automated system following Work Instructions in Mercury and set-up and troubleshooting operations of automated systems and auxiliary equipment. Processes the components or semi-products/products according to engineering specifications and quality standards and continuously performs improvement analysis. Operate sandblast cabinet and monitor maintaining good documentation practices. Performs basic or specifically defined maintenance operations; collaborates with maintenance technicians and/or external service providers in repair issues. Use hand tools, including wrenches, Allen wrenches, and screwdrivers. Other duties may be assigned, and cross-training as needed. What You Bring Evidence of a completed High school or GED is required. Ability to read Engineering instructions. Demonstrated mechanical skills. Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. This position will require an export license from the Department of Commerce, Bureau of Industry and Security, and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines, and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards Career growth and development opportunities Supportive work culture! Great company-paid Health and wellness benefits Paid Time Off and paid holidays 401K savings plan with company match! Family building benefits and parental leave Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

AV is expanding and we're looking for an Electronic Technician to join our team! Our office is located in Sunrise, FL where we provide highly competitive satellite, Wi-Fi, Bluetooth, and cellular technologies and services to our government, law enforcement, and commercial customers. Our products provide customers with unique advantages over their adversaries. AV is continually innovating to preserve these advantages. Position Responsibilities Include: Constructs, maintains, and tests moderate electrical systems and components. Uses measuring and diagnostics tools to test and modify electronic parts. Receives instruction on specific objects. Receives direction on complex problems and possible solutions. Possess effective oral and written communications skills. May assist with communications pertaining specific assignments or meetings. Possibility of up to 25% traveling. Performs other related duties as assigned by management. Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required 4 - 7 years of related experience. Minimum of 1 - 2 years of experience of recent hands-on electrical wire bundle manufacturing Effective knowledge of Schematic Capture and PCB layout software. Experience with RF/Microwave test equipment (spectrum analyzers, network analyzers, vector signal analyzers, oscilloscopes). Excellent soldering skills. Working knowledge of data collection, data analysis, evaluation, and scientific method. Working knowledge and understanding of the basic principles, theories, concepts, and practices in the applicable area of engineering/technical specialization. Commitment to excellence and high standards. Strong organizational, problem-solving, and analytical skills. Ability to manage priorities and workflow. Acute attention to detail. Demonstrated ability to plan and organize projects. Proven ability to handle multiple projects and meet deadlines. Must successfully pass a background check and drug test; Must have a Valid Driver's license with a clean driving record. Ability to obtain US Security Clearance. Other Qualifications & Desired Competencies The equivalent of a 2 - 4 year advanced studies beyond High School with emphasis in electronics, soldering, or equivalent job related training in an R&D environment is preferred. Certificate from a trade/technical school preferred. IPC610 J-STD-001 Soldering certification is highly desirable. Prior experience in an aircraft manufacturing or Aerospace R&D environment is preferred. Proven experience with basic analog and digital circuit troubleshooting and repair desired. Experience with prototype design and development of electronic systems- including avionics and/or controls highly desired. Specific experience with wiring harnesses, plastics, composites and printed circuit board manufacturing is highly desirable. Experience with CAD type design systems for creating schematics and/or hardware preferred. Demonstrates competency in successfully changing direction frequently and multi-tasking, while maintaining focus. Consistently demonstrates a positive attitude, is a self-starter, works well with within a team. Strong verbal, written and interpersonal communication skills. Demonstrates competency in working with minimal supervision, advice and assistance. Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties. Displays strong initiative and drive to accomplish goals and meet company objectives. Takes ownership and responsibility for current and past work products. Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company. Physical Demands Able to work in a manufacturing environment (Constant) Stand and/or sit for long periods of time (Constant) See details of objects that are less than a few feet away (Frequent) See differences between colors, shades, and brightness (Constant) Use fingers to grasp, move, or assemble very small objects (Frequent) Use one or two hands to grasp, move, or assemble objects (Frequent) Hold the arm and hand in one position or hold the hand steady while moving the arm (Frequent) Ability to lift and/or move between 11-20 lbs. of cases of varying size (Frequent) Ability to lift and/or move up to 50 lb. cases of varying sizes & shapes for shipment to test sites and to customers (Occasional) Able to work outdoors in extreme weather conditions and traverse across uneven ground and varying terrain (Occasional) Talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Clearance Level No Clearance The salary range for this role is: $21 - $29 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

Working Title: ENGINEER TRAINEE - 55006378 Pay Plan: Career Service 55006378 Salary: $59,273.75 - $76,707.20 Total Compensation Estimator Tool Professional Engineer Training Program Do you have the desire to be a leader in an innovative organization? Do you have a passion for improving your community and protecting the environment? The four-year Professional Engineer Training Program offers exciting career path opportunities to professional registration and advancement to leadership in the Florida Department of Transportation. The first 18 months provides practical hands-on exposure to major disciplines such as Planning, Traffic Operations, Structures, Design, Construction, and Maintenance. Depending on your performance and availability, you could be placed in the technical area of your choice where your passion and the Department's needs come together to prepare you to successfully attain your license. Opportunities for the program exist in all the Department's seven districts, the Turnpike Enterprise, or Central Office. The anticipated bi-weekly salary is $2,682.07 ($69,733.82) annually) with increases at 12, 24, 36, and 48 months, contingent upon satisfactory performance and available funding. An additional increase may be granted upon attaining a Florida Professional Engineer License. We offer an excellent benefits package including paid holidays, vacation and sick leave, low premium healthcare options, retirement plan options, deferred compensation plans, tuition waivers, and many training opportunities for professional growth and development. For additional benefit information available to State of Florida employees, go to ************************************ STATE OF FLORIDA DEPARTMENT OF TRANSPORTATION JOB POSTING DESCRIPTION 156 / Professional Engineer Trainees OPEN COMPETITIVE/CAREER SERVICE CONTACT PERSON: Anna Birosak, ************, ************************* ANTICIPATED BI-WEEKLY HIRING SALARY: $2,682.07 SPECIAL REQUIREMENTS: You may be required to provide your Social Security Number to conduct required verifications. Male applicants born on or after October 1, 1962, will not be eligible for hire or promotion in the Career Service, or appointment in the Selected Exempt Service (SES) or Senior Management Service (SMS) unless they are registered with the Selective Services System (SSS) before their 26th birthday, or have a Letter of Registration Exemption from the SSS. THE FLORIDA DEPARTMENT OF TRANSPORTATION VALUES AND SUPPORTS EMPLOYMENT OF INDIVIDUALS WITH DISABILITIES. QUALIFIED INDIVIDUALS WITH DISABILITIES ARE ENCOURAGED TO APPLY. In accordance with Section 110.112, Florida Statutes, and the Florida Department of Transportation's Individuals with Disabilities Affirmative Action Plan, the agency is committed to ensuring affirmative action and equal employment opportunity for qualified individuals with disabilities. Upon request and as appropriate, reasonable accommodations to individuals with disabilities may be provided. Please contact the Florida Department of Transportation's Human Resources Office located at 605 Suwannee Street, Tallahassee, Florida 32399 or call ************** for assistance. POSITION DESCRIPTION: Engineer trainees rotate through major disciplines shadowing and assisting professional and technical staff, completing assigned technical engineering tasks, observing and participating in project, leadership and management activities and meetings. Maintenance Phase: Performs technical engineering tasks of gradually increasing complexity in Field Operations, Warehouse, Repair Shops and Maintenance Systems. Construction Phase: Performs technical engineering and construction contract administration tasks of gradually increasing complexity in Roadway, Drainage, Traffic Control Devices and Structures. Design Phase: Performs technical engineering tasks, including sample projects of gradually increasingly complexity in Roadway Design, Drainage Design, and Traffic Design. Traffic Operations Phase: Performs technical engineering tasks of gradually increasing complexity in Signing Pavement Marking, Operations Analysis, Signalization and Signal Systems and Highway Safety. Survey & Mapping Phase: Performs technical surveying tasks of gradually increasing complexity in Base Line Control, Design Survey and Right of Way Survey. Planning and Environmental Management (PLEMO) Phase: Receives instruction and performs technical planning tasks in Transportation Statistics, Multi-Modal Transportation Planning, Florida Department of Transportation (FDOT) Five Year Plan, Project Evaluation and System Planning. Receives instruction and performs technical engineering tasks in Impact Research, Contamination Assessment & Mitigation, Permitting and Compliance. Materials Phase: Receives instruction and performs technical engineering tasks in Structural Materials & Research, Field Operations & Certification, Bituminous Materials & Research, Pavement Evaluation, Soil Materials & Research, Aggregate Control and Chemical Materials & Corrosion Research. Right of Way Phase: Receives instruction and performs engineering tasks in Drafting, Legal Description and Right of Way Computations. Structures: Receives instruction and performs engineering tasks in Bridge Design, Retaining Walls, Sign Structures, Box Culverts, Traffic Signal Structures, Plan Reviews and Shop Drawing Reviews. KNOWLEDGE, SKILLS AND ABILITIES: Knowledge of transportation engineering concepts, terminology, principles and analytical techniques. Skilled and proficient in the use of computers. Ability to solve problems relating to engineering. Ability to plan, organize and coordinate work assignments and projects. Ability to communicate effectively. Ability to establish effective working relationships with others. OTHER JOB-RELATED REQUIREMENTS: For continuing eligibility, all trainees must obtain the Fundamentals of Engineering certificate within twelve (12) months of appointment. Failure to do so will result in the trainee being removed from the program. This program is not open to registered professional engineers or candidates with more than two years of post-graduation engineering experience. Successfully complete the Professional Engineering Training Program Maintenance, Construction, Design, and Traffic Operations Phase Exams. May be required to respond to emergencies. Employee will be required to be responsive to emergency situations within a very short timeframe and serve in the Transportation Emergency Management Teams (TEMT). MINIMUM QUALIFICATIONS: A Bachelor of Engineering or Bachelor of Science in Engineering Degree from a university accredited by the Accreditation Board for Engineering & Technology (ABET), or through an equivalent accreditation as described in Chapter 471, Florida Statures, and Chapter 61G15, Florida Administrative Code, or receive degree within four months of entering the program. Have taken, or is registered to take, the Fundamentals of Engineering examination, as administered by the Florida Board of Professional Engineers, or the equivalent examination administered by another state, prior to appointment. AS A CANDIDATE, YOU MAY BE REQUIRED TO PROVIDE DOCUMENTATION (I.E. HIGH SCHOOL DIPLOMA OR EQUIVALENCY, COLLEGE TRANSCRIPTS, ETC.) TO VERIFY MEETING THESE MINIMUM QUALIFICATIONS. THE FLORIDA DEPARTMENT OF TRANSPORTATION VALUES THE SERVICE VETERANS AND THEIR FAMILY MEMBERS HAVE GIVEN TO OUR COUNTRY AND SUPPORTS THE HIRING OF RETURNING SERVICE MEMBERS AND MILITARY SPOUSES. If you are a preference-eligible applicant who receives notice of a hiring decision and believe that you were not afforded employment preference in accordance with applicable Florida law and regulation, you may file a written complaint within 60 calendar days from the date you receive the notice, requesting an investigation to the Florida Department of Veterans' Affairs, Division of Benefits and Assistance, 9500 Bay Pines Boulevard, Room 214, St. Petersburg, Florida 33708. Apply for the Professional Engineer Training Program TODAY! The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

Join a leading industry company in Auburndale, FL as an Automation & Controls Technician. Be part of a growing team within the maintenance and automation department, where you will build and maintain vital systems. **Responsibilities** + Perform advanced maintenance on mechanical, pneumatic, electrical, and hydraulic systems. + Wire and troubleshoot Variable Frequency Drives (VFDs) and Programmable Logic Controllers (PLCs). + Troubleshoot low and high-voltage systems. + Install and maintain electrical control panels and wiring systems. + Diagnose and repair motors, drives, and relays. + Repair components requiring welding, plumbing, or fabrication. + Replace high-load components such as bearings, shafts, and actuators. **Essential Skills** + Proficiency in electrical and controls systems. + Experience in PLC programming and automation troubleshooting. + Hands-on experience with VFDs and PLC wiring. + Ability to diagnose and repair motors, drives, and relays. + Experience with electrical control systems. **Additional Skills & Qualifications** + Leadership skills and experience. + Networking and controls systems expertise. + Documentation skills. + Experience with CapX projects. + Knowledge of ladder logic, conveyors, and sensors. + Preventative maintenance experience. + Relay logic knowledge. **Why Work Here?** Enjoy a comprehensive benefits package including medical, dental, and vision insurance, a 401k match, and prorated PTO. Benefit from 13 paid holidays and participate in company events within an international company setting. **Work Environment** Work in a non-climate controlled automated manufacturing and distribution environment. Be prepared to work 1st and 2nd shifts, with training on the 1st shift. Shift times are 5am to 1:30pm and 1:30pm to 10pm, Monday to Friday, with occasional Saturdays. **Job Type & Location** This is a Contract to Hire position based out of Auburndale, FL. **Pay and Benefits** The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Auburndale,FL. **Application Deadline** This position is anticipated to close on Jan 14, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We are looking for a talented Technical Engineer for the Wendy's engineering team. Requirements Hacker mindset Expertise with Objective-C and Xcode Thorough and recent experience developing for iOS 8 and 9 Strong computer science fundamentals: data structures, algorithms and programming languages An excellent understanding of networking, mobile network issues, concurrency and threading Experience developing highly performant code A disciplined approach to development, documentation and code structure A familiarity with a wide variety of software development methodologies, tools, languages and approaches At least two years engineering experience, a large portion of which in a team environment A constant desire to improve, learn more and take things higher Nice to haves Academic background in computer science (BSc or MSc) Experience developing desktop applications for OS X Experience with Core Text, Core Data, Grand Central Dispatch and Core Graphics Performance Experience with web development, distributed systems and parallel processing Experience in small start-up environments

Scope of Activities: Develop a deep understanding of the client's Robotics Platform and its functionalities Engage with clients in both technical pre\- and post\-sales activities to ensure Robotics adoption Develop automation workflows with Robotics Studio Become an evangelist of Robotics by identifying client needs and showcasing the best solutioning Learn and utilize new exciting technologies and how they integrate with Robotics Identify opportunities to expand the Robotics ecosystem of assigned client(s) Gather project requirements for integration with partner products Provide support to internal teams, as well as customers\/partners' Implementation teams, as they're involved in assigned projects Develop and document workflows and custom solutions to address specific customer needs Implement internal automations to improve enterprise business processes Deliver online and onsite trainings to customers Establish and maintain development\/consulting best practices Supervisory activities: Mentoring junior consultants in RPA, Consultative skills, environment management, code testing, coaching on subject matter expertise in healthcare Requirements Requirements: 3+ years experience in RPA programming (C#, C++, VB, Java, or Python preferred) Previous experience in application or implementation support domain is a must Previous experience and demonstrated deep knowledge of Pega Robotics platform and its tools (previously called OpenSpan) required. Previous experience with working with UiPath, Automation Anywhere, Blue Prism Willingness to travel 50\-75% \- locations below Skills required: process minded, excellent presentation and communication skills RPA Developer Advanced Certification is a strongly preferred Education: Bachelor's "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"667069833","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"IT Services"},{"field Label":"Work Experience","uitype":2,"value":"pega java software"},{"field Label":"Number of Positions","uitype":32,"value":"1"},{"field Label":"City","uitype":1,"value":"Tampa"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"33605"}],"header Name":"Pega Robotics Process Automation (RPA) Technical Lead","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00207003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"**********00750487","FontSize":"12","google IndexUrl":"https:\/\/selectforhire.zohorecruit.com\/recruit\/ViewJob.na?digest=fc WMF0hD6LYZyEd0IVljPuTRA3E12ZL@AYitGJ74K9o\-&embedsource=Google","location":"Tampa","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

HealthCare Support Staffing, Inc. (HSS), is a proven industry-leading national healthcare recruiting and staffing firm. HSS has a proven history of placing talented healthcare professionals in clinical and non-clinical positions with some of the largest and most prestigious healthcare facilities including: Fortune 100 Health Plans, Mail Order Pharmacies, Medical Billing Centers, Hospitals, Laboratories, Surgery Centers, Private Practices, and many other healthcare facilities throughout the United States. HealthCare Support Staffing maintains strong relationships with top providers in healthcare and can assure healthcare professionals they will receive fast access to great career opportunities that best fit their expertise. Connect with one of our Professional Recruiting Consultants today to see how a conversation can turn into a long-lasting and rewarding career! Job Description In this role, you will be performing electronic repair and calibration of onsite medical equipment. The Electronic Tech will be ensuring that known machinery is fixed to standard, and will perform routine checks on equipment as needed. Ensures diagnostic/therapeutic equipment meets manufacturer's specifications for safe and proper use by the performance of routine safety inspections, PM/calibrations, and repairs of assigned equipment. Utilizes available service literature relevant to equipment for completing repair and PM actions and ordering of needed parts. Monitors rental and other non hospital owned devices for compliance with corporate safety policies. Communicates information regarding status of assigned equipment to supervisor and appropriate medical personnel in the using department. Able to maintain reasonably regular, punctual attendance consistent with policies, the ADA, FMLA and other federal, state and local standards. Qualifications Must have Associate's Degree in Biomedical Equipment Repair OR Associate's degree in Electronics OR 2 Years of working experience in Biomedical Instrumentation field with NO Degree OR Associate' s Degree in Electronics-1 year experience in BioMed repair Additional Information Hours for this Position: Monday-Friday 8:00am-5:00pm Advantages of this Opportunity: Competitive salary, $16-$17 Stable facility with a developed department for BioMed repair Cutting edge facility with ample opportunity for future growth

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Biomedical Technician III Join Intelas, a Compass One Healthcare company. Intelas, a Compass One Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime-so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide-from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today's rapidly evolving healthcare environment. Join Intelas-where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: Performs planned maintenance and electrical safety inspections on a broad range of patient care and selected support equipment in compliance with established standards. Manages all assigned equipment and schedules service. Performs pre-acceptance inspections and develop PM procedures on equipment; maintains files on procedures and manuals. Ensures test equipment is working properly and calibrated within established intervals. Responds expeditiously to calls from clinical departments to evaluate and rectify valid operator complaints and concerns. Researches and initiates orders for repair parts, working within established budget parameters. Maintains purchase order log and validate invoices for payment (field service personnel only). Provides informal training to equipment users and Crothall Services Group staff as requested or when circumstances dictate. Makes recommendations to the Department Manager regarding service strategies on equipment; keeps supervisor informed of activities, needs and problems. Participates in the Quality Improvement / Risk Management program by gaining an understanding of the issues and concerns of customers and making recommendations for improvement. Maintains an orderly and functional work environment. Provides emergency on-call responsibilities as needed. Documents all significant asset related actions in compliance with department practices. Participates in department meetings. Collaborates with fellow technical personnel in department meetings to ensure they are kept abreast of technical updates and/or device related problems. Preferred Qualifications: Associates degree in electronics/biomedical equipment technology, military training or equivalent experience 3 years servicing clinical/patient care equipment in a hospital environment For field service positions requiring travel, valid driver's license is required Ability to work independently with some supervision Good communication and strong customer service skills Good organization and time management skills Working knowledge of computer applications pertaining to tracking service histories and producing reports on assets Good trouble-shooting skills Ability and willingness to serve "on-call" duty as required Strong work ethic and ability to work as a member of a team Apply to Intelas today! Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical • Dental • Vision • Life Insurance/ AD • Disability Insurance • Retirement Plan • Flexible Time Off • Holiday Time Off (varies by site/state) • Associate Shopping Program • Health and Wellness Programs • Discount Marketplace • Identity Theft Protection • Pet Insurance • Commuter Benefits • Employee Assistance Program • Flexible Spending Accounts (FSAs) • Paid Parental Leave • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace. Req ID: 1488320 Intelas Deborah Chermak [[req_classification]]

BMET II is an experienced level position for over 2 years of practical experience and is usually a subject matter expert on a few medical technologies. The BMET II is responsible for all scheduled maintenance and repair services assigned to them. Because of the close daily relationship and interaction with facility staff, BMET II's must have excellent organizational and customer service skills. Close supervision is provided to ensure service quality is maintained and that continue development of the BMET II's knowledge and skills are progressing. Specific Responsibilities: Must exhibit self motivation and personal relation skills. While working with the managers, BMET II is responsible for communicating work status along with any problems, scheduling issues and/or incomplete service activities that require management attention. Communicates with support staff pro-actively to assure customer satisfaction. Must work independently to accomplish all assigned PMs while balancing repair calls as required as well as completion of all related paperwork. Performs all assigned invasive repairs. Arranges for completion of repairs. Works from drawings, technical manuals, and other specifications to troubleshoot and repair equipment. Requests all necessary and cost effective parts for repairs using the request form. Demonstrates good judgement on which repairs are attempted on-site. Must exhibit good customer relations skills. A close daily relationship with the customer results on a high level of customer satisfaction and perception of value per dollar cost. Company image is perceived primarily through contact with the customer and on-site personnel. Must work closely with managers to keep them informed of account status. This must include CM status and PM status, special interests, and customer concern/problems. Learns new maintenance skills quickly, usually with demonstration.Builds on existing knowledge using multiple resources and passes on information to fellow technicians in the company. Operates and maintains test equipment to high standards. Skills Required: Electronics, Mechanics, Proficiency with diagnostic tools, and customer service skills. Education: Associate's Degree in Biomedical Equipment Technology, Electronics related field, or military equivalence. Disclaimer The above is intended to describe the general content of and requirements for the performance of this job. It should not be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Dental insurance Health insurance Paid time off Prius Healthcare USA LLC Oldsmar, FL Full-Time | MondayFriday | No Travel Career opportunity with a growing medical device company! Prius Healthcare USA LLC is seeking a Biomedical Engineer Bench Technician I to support repair, calibration, and maintenance of non-invasive medical equipment used across a broad range of healthcare facilities. This is a hands-on technical role ideal for someone with a BMET background who enjoys troubleshooting and working independently. Responsibilities Repair and troubleshoot mechanical and low-voltage electrical systems down to the component level on blower/pump-based medical devices Read and interpret equipment service manuals Use test equipment including manometers, digital multimeters, and electrical safety analyzers Maintain accurate service documentation and records Organize and prioritize daily workload to meet turnaround times Work independently after training, with minimal supervision Required Skills Strong critical thinking and analytical skills Computer proficiency appropriate for technical workflows Effective written and verbal communication Ability to work independently and within a team Strong customer service and interpersonal skills Solid organizational and time-management abilities Proper use, maintenance, and safety handling of tools and equipment Schedule Hours: 8:30 AM 5:00 PM (MondayFriday) Weekends: Optional if needed Travel: None Location: Oldsmar, FL (Local applicants only) Minimum Requirements Participation in a BMET program or degree a Plus (Biomedical Equipment Technology or related discipline) Mechanical/electrical troubleshooting aptitude About Prius Healthcare USA LLC Prius Healthcare USA LLC is a rapidly growing medical device company specializing in innovative support surfaces and non-invasive medical technologies. We offer a stable environment, long-term growth potential, and opportunities to expand your technical skills. How to Apply Submit your resume through ZipRecruiter. Qualified candidates will be contacted to schedule an interview.

Job Description Custom Manufacturing & Engineering, Inc. (CME) is seeking a skilled Electronics Technician experienced in cable and wire harness assembly, electronics/electrical systems, and test equipment. The ideal candidate has hands-on soldering expertise and holds a current J-STD-001 certification. Key Responsibilities: Assemble, modify, and repair electrical/electronic equipment, including harnesses, circuit boards, test equipment, and power systems. Perform precision soldering to J-STD-001 and IPC/WHMA-A-620 standards. Read and interpret specifications, drawings, schematics, and part lists. Inspect and test wiring installations and assemblies for performance and compliance; record test results. Operate standard test equipment, including continuity testers and meters. Collaborate with engineers and production teams to resolve issues and improve assembly methods. Maintain accurate build and test documentation. Qualifications: High school diploma or equivalent; technical/trade school certification preferred. 2+ years of electrical/electronic assembly experience in manufacturing. Current J-STD-001 and IPC/WHMA-A-620 certifications required. Skilled in soldering, crimping, and reading technical drawings/schematics. Familiarity with test equipment and Class 3 standards. Excellent attention to detail, organization, and teamwork skills. Other Requirements: Must be a U.S. Person (citizen or lawful permanent resident) per ITAR/EAR regulations. Employment eligibility verification required; CME cannot hire individuals on student or temporary work visas. Completion of Predictive Index assessments (sent via email after applying). About CME: Custom Manufacturing & Engineering, Inc. (CME) is a 29-year-old, award-winning Tampa Bay small business that designs and manufactures custom-engineered and build-to-print products for aerospace, defense, and industrial markets. Our products include cables and wire harnesses, power distribution equipment, and specialized test systems used by the U.S. military and global partners. CME operates on the Entrepreneurial Operating System (EOS), fostering a Culture of Accountability driven by our five core values: Resolves Problems, Professionalism, Challenges Themselves, Delivers, and Serves Customers - Protects CME. Learn more about our culture at CME Careers - Culture of Accountability Equal Opportunity Employment: CME is an Equal Opportunity Employer and considers all applicants without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, marital status, veteran status, or any other protected class under federal or Florida law. Job Posted by ApplicantPro