Engineering technician jobs in Gaithersburg, MD - 828 jobs

BAE Systems is seeking an Engineering Technologist to support our work as a prime contractor on a high-profile U.S. Navy weapon system. The ideal candidate would be detail and goal oriented, accurate, and works well alone and within a team setting. These are some of the important traits that are expected. There are many traits needed and that would be desirable for this position. As a member of the SSPETD/SWSLIB (BAESystems) Technical Support Team, the selected candidate will participate in the timely start and execution of the documentation change process. Helping to ensure the successful completion of Performance Based deliverables using BAE Systems and customer processes, work instructions, and customer's directives. Support the daily operations of the SP2013 Documentation Organization. This role is responsible for handling inputs from multiple outside engineering agencies and updating documentation both in paper and electronic formats to provide an integrated documentation package for TRIDENT II submarine use. These documentation changes require a critical eye for technical soundness, consistency, and adherence to governing documentation. This requires that any issues or potential issues be reported, and steps taken to mitigate and/or prevent a reoccurrence. This maintains the processes in a state of continuous improvement allowing greater efficiency and higher quality. Additionally, the candidate may be required to assist other team members and teams in necessary operations. A limited amount of travel maybe required for training and representing BAE Systems at fleet, government, and contractor liaison meetings. #LI-VW1 #LI-Hybrid About BAE Systems and the U.S. Navy's Strategic Systems Programs (SSP) Our organization has supported the U.S. Navy's Strategic Systems Programs (SSP) continually since the program's inception in the 1950s. SSP developed the first sea-based, underwater-launched Strategic Weapon System (SWS), a defense system that is truly critical to our national security. For more than six decades, SSP has maintained and upgraded this weapon system and we have been there every step of the way. The sea-based SWS is the ultimate stealthy weapon system and is the first leg of the U.S. nuclear triad. With over 70% of our nation's nuclear arsenal its importance to maintaining world peace cannot be overstated. The development of Columbia, the most advanced nuclear-powered, nuclear-armed submarine ever designed, as well the next D5LE2 weapon system is under way and will begin to be rolled out over the next decade. The Navy projects this system to be operational through 2084, meaning the program will have a total life span of more than 120 years. This is a unique program and BAE Systems employees on this program understand they are part of an important legacy. As a decades long sole source partner on multiple contracts on behalf of our customer, our program has remarkable stability and is concurrently experiencing significant growth. Combined, these factors provide ample opportunity for professional growth and development for capable and talented individuals on our team. BAE Systems, Inc. is the wholly owned U.S. subsidiary of BAE Systems plc. BAE Systems plc provides some of the world's most advanced, technology-led defense, aerospace, and security solutions. As one of the top ten defense contractors, we employ a skilled workforce of around 100,000 people in more than 40 countries. We develop, engineer, manufacture, and support products and systems to protect national security and keep people safe. Required Education, Experience, & Skills Required Education, Experience, & Skills. Typical education and years of related/relevant work experience required: Bachelor's degree and least 4 years of related/relevant work experience Associate's degree and at least 6 years of related/relevant work experience High School diploma and at least 6-8 years of related/relevant work experience 4 years missile technician experience preferred Additional skills/experienced required: Knowledge of Configuration management Experience with Microsoft Office and Adobe products Good verbal and written communication skills and the ability to present and speak in a public forum Ability to work and communicate well with management, customers and work effectively with others Preferred Education, Experience, & Skills Preferred Education, Experience, & Skills: Active DoD Secret security clearance Ability to properly identify and collect relevant data Ability to analyze performance from collected data Technical writing and editing ability Knowledge of Strategic Systems Programs Organization Trident Submarine SWS/AWS operation and maintenance experience Pay Information Full-Time Salary Range: $97008 - $164914 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Intelligence & Security BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Intelligence & Security (I&S), based in McLean, Virginia, designs and delivers advanced defense, intelligence, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do-from intelligence analysis, cyber operations and IT expertise to systems development, systems integration, and operations and maintenance services. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats inspires us to push ourselves and our technologies to new levels. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

R&D Partners is seeking to hire a Manufacturing Technician in Frederick, MD. Your main responsibilities as a Manufacturing Technician: The Material Handlers follow Good Manufacturing Practices (GMPs) and Standard Operating Procedures (SOPs) in daily activities. Performs receiving, picking, shipping, equipment monitoring and material control. Revises SOP's. Initiates and completes deviations, as required. Provides leadership to other team members. What we are looking for in a Manufacturing Technician: High School Diploma or equivalent Experience using Microsoft Outlook, EXCEL and Word a plus. Experience using SAP a plus. Drivers license required. Forklift certification a plus. Ability to prioritize work requirements, must be well organized and able to manage time efficiently, and must have a strong sense of responsibility. Why Choose R&D Partners? As an employee, you have access to a comprehensive benefits package including: Medical insurance - PPO, HMO & Dental & Vision insurance 401k plan Employee Assistance Program Long-term disability Weekly payroll Expense reimbursement Online timecard approval Pay Scale: $34,195 - $42,754 Dependent on Experience) R&D Partners is a global functional service provider and strategic staffing resource specializing in scientific, clinical research & engineering. We provide job opportunities within major pharmaceutical, biopharmaceutical, biotechnology, and medical device companies. R&D Partners is an equal-opportunity employer. If you are interested in applying to this exciting opportunity, then please click 'Apply' or to speak to one of our specialists visit the 'Contact Us' page. R&D Partners is a leading life sciences recruiter focused on finding exceptional people and matching them with the finest positions across the globe. R&D Partners is acting as an Employment Agency in relation to this vacancy. By submitting this application, you confirm that you've read and understood our privacy policy, which informs you how we process and safeguard your data - *******************************************

IMPORTANT: For the first 7 weeks of the assignment, all contractors are required to work Mon-Fri (0730-1600) to complete New Hire Orientation and Manufacturing On-boarding Technical Training. After the 7 weeks, the contractor is deployed onto their agreed upon shift. Role is full time 4/10 role but the roles and shifts can change with the needs of the dept. Shift times will be directed by the manager or dept leads. 6:00 am to 4:30 pm (Day Shift), Sun-Wed and Wed-Sat 3:00 pm to 1:30 am (Swing Shift), Sun-Wed and Wed-Sat Job Description Everyone at this facility is grounded by one common goal - curing cancer. Every single day, we seek to establish a direct line between that purpose and our day-to-day work. Would you like to join us in this mission? We are seeking a highly motivated, Cell Therapy Specialist to join our newly formed Cell Therapy Manufacturing team at our brand new, state of the art, commercial Cell Therapy facility in Frederick, Maryland. The Cell Therapy Specialist will perform and/or verify all tasks associated with the manufacture of commercial product following batch records and standard operating procedures (SOPs) to ensure safe and compliant operations as well as works as part of a team to execute GMP runs in close collaboration with Materials Management, Quality Control and Quality Assurance. Are you passionate about making an impact on people's lives? Would you be excited to work for a company leading the way in developing and producing unique, innovative immunotherapies? Do you have a background in cGMP manufacturing? If the answer is yes, we'd like to consider you! Responsibilities of the Cell Therapy Specialist include: • Successfully troubleshoots processing and equipment issues while communicating said issues to management • Completes required training assignments to maintain necessary technical skills and knowledge and to ensure compliance with cGMP requirements • Authors and/or revises SOPs that are technically sound, provides clear instructions to align with cGMP requirements and supports efficient operations • Routinely monitors, cleans, prepares and operates sophisticated automated cell processing, cell expansion and filling equipment in Grade B/C clean rooms o all required PPE and gowning for classified GMP manufacturing areas is provided by the company. • Finds opportunities for improvement in manufacturing efficiencies and compliance while assisting with investigations/deviations and change controls Basic Requirements: BA / BS Degree in Sciences Field OR AA Degree with 1+ years of cGMP experience OR High School Degree and 2+ years of cGMP experience

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Manufacturing Engineer Job Code: 32309 Job Location: Ashburn, VA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: L3Harris is searching for a Manufacturing Engineer to support the Unmanned Systems business in Ashburn, VA. This role is responsible for solving manufacturing problems with innovative solutions and driving continuous improvement in our manufacturing processes, be a key part of the Integrated Product Team to develop and execute manufacturing plans, and collaborating with other engineering disciplines, program management, quality assurance, and manufacturing. This role is apart of the Agile Development Group which is a division that specializes in developing disruptive, next-generation technologies for advanced Unmanned Air Systems (UAS / UAV), advanced radar systems, next-generation weapon systems, and other RF sensor technologies using small company agility and big company experience. Essential Functions: Investigate and implement alternate/new manufacturing processes and technologies for emerging programs. Provide key technical input on all product designs for manufacturing ease and cost considerations. This includes analyzing different design approaches and manufacturing methods. Examine early assembly prototyping/testing to provide feedback in the design process. Identify and justify capital equipment needs for capacity and capability expansion Provide technical mentorship for team in areas of expertise Contribute to CAM and IPT activities Initiate and review manufacturing workflow and processes/procedures such as: Work/assembly instructions Rework and modification instructions Travelers/routers Special process instructions Standard repair instructions Review and approve drawings for the Manufacturing Department (i.e. sign off authority). Communicate information between the design and manufacturing teams and ensure that design feedback from manufacturing is relayed to engineering. Lead and support Lean Manufacturing initiatives in the organization such as 5S, Tool Control, etc. Up to 5% travel may be required Ability to obtain and maintain a DoD clearance Qualifications: Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Masters degree in relevant engineering field or related field and/or equivalent experience desired Experience and knowledge of manufacturing methods, specifically in composites, metals, and electronics. Experience leading small teams Experience with technical writing, specifically work instructions and process documentation. Experience in aviation or military systems manufacturing Experience with creating and presenting performance metrics. Experience with Capital Equipment justification and BOEs Excellent people skills to include collaborating in a multi-disciplinary, diverse, and dynamic team environment Excellent communication skills (written, verbal, & presentation) Experience in a 3D CAD software. Experience in Creo is preferred Experience with Power BI or data analytics Experience/certification in lean practices; 5S, six sigma #LI-KT1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Senior Hiring Specialist - Civil Engineering & Architecture We're looking for a Senior Consultant to join our Workforce Strategy team in Washington, DC. In this role, you'll partner with executives across engineering and architecture firms to help them attract, hire, and retain top talent. You'll oversee and execute high-level strategic searches, advise clients on employee engagement and development practices, and build lasting relationships with career professionals across the AEC industry. This role is ideal for someone who loves connecting people with purpose, understands the nuances of talent in a technical industry, and wants to make a tangible impact on how firms grow and lead their teams. Why DesignForce? At DesignForce, we're a hardworking, passionate, and collaborative team united by one mission - to elevate the employee experience in the AEC industry. As a proud Certified B Corporation, we're guided by principles of social responsibility, ethics, and impact. We balance purpose and fun, with a culture that celebrates connection and creativity through happy hours, team bonding events ( sip-and-paint nights, bowling, paintball, escape rooms, axe throwing and more), and biweekly catered lunches. Our biweekly internal trainings reflect our deep commitment to innovation and continuous learning, we're always looking for ways to elevate our people and our work. We bring high energy and fresh ideas to everything we do, working in a flexible hybrid environment out of our vibrant, modern office in Dupont Circle. Core Responsibilities Include: Develop and foster long-term relationships with professionals in the design and building industries, assisting them with their career development. Provide personalized career coaching sessions for professionals within the Architecture, Interiors, Engineering, Development and Construction fields. Assist with the development and execution of workforce strategy initiatives, including 360-performance reviews, strategic planning, benefits benchmarking, compensation analysis, and employee engagement surveys. Partner strategically with organizational leaders and hiring managers to proactively assess talent needs, providing expert guidance to shape workforce planning and ensure alignment with both immediate and long-term business objectives. Source talent and continue to build and enhance an active National network through various channels like LinkedIn, social media, and industry networking events. Aid in the development and facilitation of high impact learning and development workshops. Research and write industry-specific blog articles to promote DesignForce and personal brand. Preferred Qualifications Include: Hold a BA or BS in Communications, Human Resources, Psychology, Architecture, Interior Design, Civil Engineering, or a related field. 4+ professional years of experience, with a strong preference of 2+ years being focused in talent acquisition, recruiting, human resources, career coaching, design, engineering consulting, or a related field. Display exemplary communication capabilities, effectively communicating verbally and through writing. Demonstrate strong ownership of your workload by proactively managing client and internal team relationships, independently establishing realistic deadlines, and consistently delivering results that meet or exceed the highest standards of excellence. Be able to pivot quickly and adapt to change in a fast-paced, high-energy environment. Love food. Seriously. We like to eat. (Specific knowledge about the DC food scene is a plus but not a requirement). Additional Information - We Take Care of Our People by Providing the Following Benefits: Generous Paid Time Off (PTO) & Paid Holidays Paid Voting & Wellness Leave Annual Professional Development Budget Paid Parental Leave On-Site Gym Membership Comprehensive Medical, Dental, and Vision Coverage 401(k) with Matching Quarterly Team Volunteering Outings Professional Development Support Bi-Weekly Catered Team Lunch Equal Opportunity Employer At DesignForce, we don't just accept difference - we celebrate, support, and thrive because of it. DesignForce is a proud equal-opportunity employer. Employment at DesignForce is based solely on a person's merit and qualifications directly related to professional competence. DesignForce does not discriminate against any employee or applicant because of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy, or related condition (including breastfeeding), or any other basis protected by law.

Day to day: Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. Provides clear documentation of findings and results. Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. Communicates information to Project Manager and other personnel as directed by the PM. Assists higher level technicians on complex tasks. Maintains assigned equipment and related calibration. Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. Be responsible for maintaining quality standards on all projects.

Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: Up to 10% Type of Travel: Continental US * * * The Opportunity: CACI is seeking a Nondestructive Ultrasonic Testing Technician (NDT) to support the Naval Surface Warfare Center Carderock Division (NSWCCD) in Bethesda, MD. The Nondestructive Ultrasonic Testing Technician (NDT) will provide nondestructive testing and inspection tasks across a variety of materials and objects. The technician will also write and approve plans and procedures in support of those tests. Responsibilities: Perform and oversee advanced ultrasonic testing, including thickness, shear wave, time of flight diffraction (ToFD), and phased array ultrasonic testing (PAUT). Inspect various types of metal materials, polymers and composites to include flat plates, weldments, shapes and pipes. Generate and approve scan plans, write and approve UT testing procedures and workmanship standards. Qualifications: Required: Must be a U.S. Citizen. High School Diploma. Current Secret Clearance. Certified to Level III Test Examiner for ultrasonic testing to perform UT thickness, shear wave, and time of flight diffraction (ToFD) per Nondestructive Testing Methods (NAVSEA T9074-AS-GIB-010/271). Certified level III for phase array UT (PAUT) under the American Society for Nondestructive Testing (ASNT). 10 years of experience in nondestructive testing (NDT). What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. The proposed salary range for this position is: $78,700 - $165,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Leidos is seeking a Quality Control Technician to support the Sea System Division (SSD) in Sterling, VA, an AS9100 certified facility. SSD is aligned within the Leidos Defense Systems Sector under the Sea Systems business unit. The scope of the business activities at the facility includes development and deployment of advanced technology solutions that address existing and emerging maritime missions of national importance for a broad range of customers across the Department of Defense, Maritime Community, other governmental agencies and commercial clients. Primary Responsibilities: Perform program quality planning Analyze program QA requirements, support the development of test procedures and inspection checklists Participate in design and program reviews to ensure quality attributes are incorporated into product designs and process plans. Review and approve new and revised drawings Review and approve new and revised process plans Perform quality inspections of components, subassemblies and completed assemblies Witness required testing per approved test procedures, document findings Document nonconforming materials and coordinate the material reviews and dispositions Support the collection of Quality Metrics Work with program teams and site leadership to proactively work corrective actions and opportunities for improvement, and ensure timely completion as required by Leidos policies Analyze non-conformance trends to evaluate the effectiveness of corrective and preventive actions. Support the conduct and documentation of internal quality audits for the site, report results & document findings Provide guidance and work with programs to establish root cause(s) and corrective actions for findings and requirement escapes Review and provide input to program plans and other program documents in support of document accuracy and on-time delivery Support proposal activities to ensure quality requirements and hours are documented and estimated properly for the scope of the work Coordinate RMA returns and initiate and track supplier corrective action activity Maintain approved supplier list and support supplier ratings Basic Qualifications: High school diploma or equivalent and 3 - 5 years of prior relevant experience Ability to manage many activities simultaneously Self-starter with attention to detail / observant Strong communication and analytical skills Able to interpret written specifications and drawings Experience in performance of quality audits, root cause analysis and test witnessing Continuous improvement experience in leading innovative changes Must be a US citizen Must be proficient in using Microsoft Office Products (Word, Excel, Visio, PowerPoint, & Project) Working knowledge of the AS9100D standard Preferred Qualifications: Certified Lean Six-Sigma Yellow or Green Belt Formal auditor training Experience working in a hardware manufacturing environment Experience performing ISO 9001 or AS9100 Quality Audits Experience with Costpoint system At Leidos, we don't want someone who "fits the mold"-we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, "what's next?" before the dust settles on "what's now." If you're already scheming step 20 while everyone else is still debating step 2... good. You'll fit right in. Original Posting: January 6, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range: Pay Range $50,700.00 - $91,650.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit *************** Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ************************************ Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at [email protected]. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Title: QC Microbiology Technician 100% onsite Duration: 12 months Contract Shift: Sunday - Wednesday | 7:00 AM - 6:00 PM The QC Microbiology Technician will support Quality Control operations within a commercial cell therapy manufacturing facility. This role is responsible for performing microbiological testing for clinical and commercial products, including environmental monitoring, utility testing, and microbial assays. The position plays a key role in ensuring product quality and compliance in a fast-paced cancer immunotherapy manufacturing environment. Key Responsibilities • Perform environmental monitoring of cleanroom and controlled manufacturing areas • Collect and test water samples according to established schedules • Perform and review microbiological assays including Gram Stain, Endotoxin, Sterility, Microbial Identification, Growth Promotion, Bioburden, and plate reading • Conduct and review visual inspection of final product • Perform data entry, trend analysis, and prepare summary slides for management review • Assist with investigations related to out-of-specification (OOS) results and manage deviations associated with microbiology procedures • Perform routine maintenance of laboratory equipment and lab spaces • Review and approve final product release microbiological test results • Perform additional duties as required to support Quality Control operations Qualifications Basic Qualifications • Associate Degree with 1+ year of experience in a Microbiology laboratory or Environmental Monitoring OR • High School Diploma with 2+ years of experience in a Microbiology laboratory or Environmental Monitoring Preferred Qualifications • Experience with microbiological techniques including environmental air monitoring, water testing, and surface monitoring • Experience working with aseptic techniques and cleanroom operations • Knowledge of GMP regulations, SOPs, and Quality Control processes for commercial manufacturing • Ability to gown for entry into aseptic core and support areas • Ability to lift approximately 25 lbs. • Ability to pass vision testing for visual inspection activities • Proficiency with Microsoft Word, Excel, PowerPoint, and related applications • Excellent verbal, written, and interpersonal communication skills • Comfort working in a fast-paced, evolving environment with minimal supervision • Flexibility to adjust workload and work overtime as needed

Job Title: Quality Control Technician Duration: 12 Months PR:$28/hr to $31/hr DAY Shifts: 4/10 (4 days x 10 hours/day) Sun - Wed. 7:00am-6:00pm (1 opening) Role: Execute tasks associated with sample management, shipment of samples, and other lab support QC functions, while interacting cross-functionally with personnel from other QC groups, Quality Assurance, Analytical Development, Manufacturing, Material Management (MM), and Corporate teams. Responsibilities (include but are not limited to): Receive incoming samples, verify documentation, and log sample information into LIMS. Execute processes to support sample receipt and processing or aliquoting for release/stability testing and retains. Label, store, and organize samples according to established procedures and storage requirements. Coordinate sample transfers to internal and external testing labs. Perform routine cleaning, maintenance, and restocking of sample storage areas. Collaborate with MM, QA, and other QC functions-including Corporate QC-to support requirements around sampling, testing, and disposition. Manage and complete all shipping activities within QC functions. Complete routine review of records, such as sample chain of custody forms, processing logs, logbooks, and other documentation generated within QC Lab Support. Assist with deviation and investigation activities as needed. Provide updates during daily and weekly meetings. Participate in Lean Lab and other Operational Excellence initiatives. Comply with all safety, quality, and regulatory guidelines. Perform other duties as assigned. Basic Qualifications: Bachelor's Degree OR AA Degree and 2+ years' experience working in Quality Control or biopharma laboratories preferably in an FDA regulated laboratory OR High School Degree and 3+ years' experience working in Quality Control or biopharma laboratories preferably in an FDA regulated laboratory. Preferred Qualifications: Strong knowledge in applying GMP in QC lab. Exceptional attention to detail and ability to keep track of multiple ongoing projects Proficient in Microsoft Office, Excel, Visio, and other related applications Excellent interpersonal, verbal and written communications skills which are essential in this collaborative work environment Comfortable in a fast-paces small company environment and able to adjust workload based on changing priorities. Ability to be flexible with schedule, and work overtime as needed

Physical Work Location: Sterling, VA This position is for a Engineering Services Support Technician. Performs complex technical tasks which contribute to the planning and execution of engineering projects. Collaborates with higher level support staff to confer with engineers on details and implications of test procedures and results. Assist in orienting, training, and assigning work of technical/business support employees. What You Will Do: •Works under minimal supervision to provide technical support to engineers on a variety of engineering tasks. •Performs moderate to complex technical tasks which contribute to the planning and execution of engineering projects. •Reviews illustration of workflow, routing, floor layouts, material handling, or machine utilization. •Operates, inspects and maintains test setups and equipment to detect malfunctions. •Conducts moderate to complex materials test and analysis. •Collaborates with higher level support staff to confer with engineers on details and implications of test procedures and results. •Provides technical support to engineers on a variety of tasks. •Plans and executes experiments and gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes to support engineering disciplines. •Analyzes, maintains, compiles and formats data and design changes. •Produces drawings, reports and engineering documentation. •Performs research and engineering laboratory functions involving the layout, building, testing, troubleshooting, repairing and modification or electronic or electro-mechanical devices, assemblies, subsystems, and systems. Qualifications You Must Have: •Typically requires an AA/AS degree (or other 2-year post high school training) with a minimum of 6 years of relevant experience •Experience with component level Troubleshooting •Experience with fine pitch soldering, Circuit Card Assembly Rework, Complex •Electro/Mechanical Assembly, Acceptance Testing Qualifications We Prefer: •Military Experience •J-STD Solder Certifications a plus •Experience working in a lab or production environment •Organization and basic project management skills

LOCATION Beltsville, MD TYPE: Full Time COMPENSATION: $20 - $30 HOURLY Advanced Technology & Research Corporation (**************** is seeking to fill the following full-time permanent position. Based in Maryland and incorporated in 1973, ATR is an equal-opportunity engineering company with a solid reputation in various engineering disciplines for the government and Fortune 500 commercial customers. Salary for the position is competitive according to qualifications. ATR offers an attractive comprehensive benefits package, including Medical/Dental insurances, free basic life/ADD, and long-term and short-term disability insurances, 401(k) plan, educational assistance program, and 5 weeks of paid leave per year for minimum seniority. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability or veteran status. Qualified persons should apply at: ********************************************************************* PRINCIPAL DUTIES AND RESPONSIBILITIES: ATR is seeking an experienced Electro-Mechanical Technician to join the Automation Division, working with a team of engineers at the headquarters in Beltsville, Maryland. The successful candidate will have general knowledge of electrical and mechanical assemblies and possess basic knowledge of electronic circuits and automation assemblies Other duties include, but not limited to: Assemble, install, troubleshoot, and repair electronic and computer-controlled mechanical systems, such as robotic systems and material processing machines EDUCATION & EXPERIENCE REQUIREMENTS: 5+ years' working experience with electro-mechanical equipment BS or Associates Degree in a technical field desired Specialized technical training a plus SKILLS & ABILITIES REQUIREMENTS: Ability to read blueprints, schematics, and diagrams to determine the method and sequence of assembly of the components Ability to verify dimensions of parts using measuring instruments to ensure that specifications are met Basic proficiency metalworking machines and welding equipment Knowledge of hydraulic and pneumatic systems Manual dexterity to assemble a wide variety of electro-mechanic equipment using basic hand tools and specialized equipment Ability to develop and follow assembly or test procedures Effective writing skills to document procedures and test results OTHER REQUIREMENTS: Candidate must be a US citizen

Job Description Security Clearance: Interim-Secret Required to Start Job Type: Full-Time Target Salary Range*: $100,000 - $130,000. *This represents the potential salary range for this position depending on education level, years of experience and/or certifications in addition to other position specific requirements which may impact salary Position Overview: Amatriot is looking for a Metrologist to join the team at the Naval Surface Warfare Center, Carderock Decision's (NSWCCDs) Fabrication Team. In this role, you will utilize high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and perform computerized spatial analysis. Calibrate equipment then measure item geometry and spatial relationships. This includes small and large-scale items requiring dimension and tolerance analysis to determine accuracy. Shall restrain items to prevent hog and sag deformation prior to measurement. Provide Tolerance Measurement Study upon completion. Perform preventative and routine maintenance and calibration of measurement equipment as needed and issue calibration Key Responsibilities: Prepare measurement reports per customer specifications. Determine if first article parts are acceptable. Implement new innovative practices to promote part accuracy, and proficiency. This may include, but is not limited to, new reporting templates or formats that better facilitate the documentation, reporting, and tracking of precision measurement activities. Use Polyworks Metrology Software to inspect high tolerance finished components designed with minimal fixturing to preform article inspection. Use Polyworks to advise shop management, supervisors, and planners, during the planning and costing phase, on the difficulty, complexity and potential issues which may arise during the inspection process. Analyze and diagnose problems which may arise during the inspection process. Utilize Polyworks or Spatial Analyzer to determine root cause of potential issues and develop methods and processes to ensure that similar issues are reduce or eliminate in future tasks. Use Polyworks software to perform Laser Tracker measurements according to the Model Fabrication Facility policies and standard practices Adhere to the Model Fabrication Facility policies and standard practices were applicable. Design specialized tooling fixtures to be used to support the production of complex machined components Applies knowledge of engineering disciplines in structural design, weld design materials applications and prototype design · Skilled in the interpretation of complex engineered drawings, sketches and verbal communications Qualifications: High School diploma or equivalent. Experience with utilizing high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and performing computerized spatial analysis Knowledge of manufacturing trades including industrial and commercial manufacturing processes to contribute to the engineering design and development function Ability to collect and analyze data in test samples and fabrication mockups and apply the data collected to the fabrication of future high cost components and models Experienced in inspecting and dimensionally verifying components and models to ensure compliance with dimension specified in drawings, specifications and control documents. Experience with generating and delivering measurement reports per customer specifications Thorough understanding of geometric dimensioning and tolerance practices, including NIST. Ability to read and work from highly detailed drawings and specifications. Desire to learn, ask questions, and take initiative within safety and skills limitations. Preferred Qualifications: Possess a working knowledge of machining and sheet metal processes. Familiarity with NAVSEA, Navy, or other military standards for fabrication Experience with PolyWorks and Spatial Analyzer

About Us With more than 2 million nautical miles sailed and 50,000 days at sea, Saildrone has earned the trust of governments worldwide. Our unmanned surface vehicles (USVs) deliver continuous, real-time intelligence in the toughest oceans on Earth-giving our partners faster awareness, stronger security, and a decisive edge at sea. Our USVs are long-range, extreme-endurance platforms powered by advanced sensors and proprietary AI - they have been designed to operate where no crewed vessel can. They collect critical insights above and below the surface to support border security, law enforcement, naval operations, and undersea infrastructure protection. Headquartered in Alameda, CA, with offices in Washington, DC, and global deployment hubs, Saildrone operates missions worldwide. Join a fast-moving, mission-driven team at the intersection of AI, autonomy, and defense technology-where data turns into intelligence, and intelligence drives action. The Role As a Watchfloor Technical Operations Engineer you will serve as the front line of technical defense for Saildrone's global fleet. You'll sit at the center of live operations, monitoring system health, diagnosing issues, and responding rapidly to ensure our vehicles continue delivering critical data to customers around the world. During business hours, you'll be stationed on the watchfloor alongside mission operators, providing real-time technical overwatch across hardware, software, and network systems. Outside of business hours, you'll participate in an on-call rotation that ensures 24/7 coverage for the fleet. Your actions will directly influence Saildrone's most important operational metrics and revenue-generating capability. This is a role for someone who thrives in fast-moving, high-stakes environments. You'll be the person everyone counts on when a vehicle goes offline mid-mission, when a new payload misbehaves, or when a root cause needs to be identified quickly. If you take pride in being the one who keeps the system running - the quiet hero behind every successful mission - this is where you belong. Responsibilities Develop a top-to-bottom understanding of complex sensors and embedded systems as they relate to an entire, functioning system. Monitor live vehicle operations across the global fleet, providing real-time technical overwatch using telemetry and diagnostic tools to proactively identify anomalies and emerging issues. Provide internal customer service to supported mission execution teams to quickly resolve any technical issues they experience, including performing readiness reviews and pre-deployment checks to ensure vehicles are fully mission-capable. Build trust with cross-functional teams and participate in root cause analysis to identify areas for improvement Deliver structured technical feedback into engineering, helping to shape long-term fixes, design revisions, and reliability improvements. Provide on-call support to troubleshoot, diagnose, and fix software, hardware, and networking issues on autonomous surface vehicles Participate in on-call rotations for high-impact, high-priority issue resolution Develop and maintain troubleshooting playbooks, documentation, and tools to speed up incident response and improve team consistency. Contribute directly to fleet reliability metrics, maintaining accountability for vehicle uptime, mission success rates, and incident resolution performance. Required Skills and Experience 2+ years in a field support, systems integration, operations engineering, or technical watchfloor environment. Ability to independently apply knowledge of electrical diagrams/schematics, and mechanical systems to identify a problem with a product, determine the cause, and execute an appropriate repair. Familiar with electrical, mechanical, and materials engineering concepts. Able to context switch quickly to respond to new and urgent issues. Comfortable obtaining data and diagnosing issues from software and networking platforms using command-line tools on a Linux OS. Strong understanding of electrical, mechanical, and networking fundamentals, and how these disciplines interact within complex embedded systems for diagnostics, log parsing, and system interrogation. Proven ability to interpret telemetry, logs, and system metrics to diagnose complex performance issues. Basic scripting ability (Bash, Python, or similar) to automate repetitive diagnostics or data-gathering tasks. Maintain appropriate records and inventories. Possess organizational habits and a willingness to define, follow, and improve process and work standards. Strong people skills and an ability to work with a wide variety of teams as a leader, and a follower Willingness to work flexible hours, including participation in an off-hours on-call rotation for fleet continuity. Desired Skills and Experience Experience in field engineering, test engineering, operations engineering, or integration/prototype roles. Experience in mission operations, NOC, or remote monitoring environments. Knowledge of service-level objectives and metrics (SLI, SLO, SLA, Error Budget, Burn Rate). Experience applying continuous improvement and root cause analysis to scale operations in a start-up environment. Familiarity with network and message protocols (TCP/IP, HTTP, CAN, RS-485, RS-232, SPI, I2C, routing, ACLs) and using APIs to interact with processes and components. Experience with autonomous systems, marine electronics, or sensor payloads. Proficiency in industry-standard CAD tools (NX, Solidworks, Fusion 360, EAGLE, KiCad, Altium). Experience leading teams, including third-party contractors, to execute operational plans and deliver on contractual obligations on time and within budget. Strong documentation skills: writing process standards, procedures, and work instructions. Familiarity with project management tools (Jira, Confluence, Asana, Monday, etc.). Experience in marine operations. Location: This position is in Washington, DC. All employees are required to provide proof of authorization to work in the U.S. within their first 3 days of work. Please note that the Company does not sponsor employees for work visas or permanent resident cards to work in the U.S. If you need sponsorship for a work visa or green card, you will not be qualified for employment with Saildrone. Benefits: Paid time off, including vacation, bereavement, jury duty, sick time and parental leave Comprehensive and competitive medical, dental and vision plans, and HSA with employer matching. Company sponsored life insurance Stock Options Annual stipend for continued learning and development The salary range for the role is $100,000-$150,000 annually. Individual compensation packages are based on geographic location, scope of the role, and relevant experience, among other factors. Saildrone is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. #LI-Onsite

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Biomedical Engineering Tech II - (2600000O) Description The Biomedical Engineering Technician ll will provide preventive maintenance inspection on medical equipment to meet regulatory and department goals. Will regularly visit and work with customers within the hospital to ensure the medical equipment is meeting the needs of the department. Will operate Test Equipment necessary to perform inspection and preventive maintenance. Will lead, follow, and understand manufacturer schematics to repair medical equipment. Will provide repair and maintenance of medical equipment. Will troubleshoot problems, provide customer with communication as to status, document the work, and follow-through in a timely manner. Will also participate in various levels of medical equipment selection, installation, setup, and disposition of the medical equipment. Will monitor and evaluate the quality of service and documentation provided by manufacturers and third-party service groups. Qualifications Minimum EducationHigh School Diploma or GED (Required) Minimum Work ExperienceAt least 3 years of experience inspecting, troubleshooting, maintaining, and repairing the following types of Medical Equipment: physiologic monitors, various styles of infusion/ feeding pumps, electrocardiographs, blood pressure monitors, infant incubators, radiant warmers, electrosurgical units, electric beds, nurse call systems, cribs, steris scope washers, OR Lights, OR Tables, defibrillator monitors, patient scales, hypo/hyperthermia equipment, physical therapy equipment, sterilizers, misc. equipment used in the OR, and some clinical laboratory equipment, such as centrifuges, incubators, slide stainers. (Required) Required Licenses and CertificationsValid drivers license to operate hospital vehicles. (Required) AAMI CBET Certification preferred. (Preferred) Functional AccountabilitiesMedical EquipmentTroubleshoot and repair complex electronic and electromechanical biomedical equipment to sub-ssembly level. Performs preventive maintenance, QA inspection, calibration and electrical safety test on a wide variety of biomedical equipment. Purchase OrdersPrepare purchase order requests for repair parts, to include vendor selection and follow-up and ensure parts have been delivered and installed. Internal and External CommunicationRoutinely contact requestor regarding assigned work order to notify receipt and estimated time of arrival. Communicate to requestor steps for completion of work order and provide any follow-up information. At all times represent the engineering staff in a professional and helpful manner. Communicate with staff and management to solve problems and improve processes. Support the work efforts of the team. Assist new team members with general information when necessary. Quality AssuranceTake the initiative to identify and report deficiencies in the physical plant of the hospital. Diagnose and resolve trouble ticket/work orders thoroughly until completed. When necessary, routinely follow-up with manager to communicate or request assistance in order to complete work orders. Follow-up with requestor after completion of a work order to ensure problem has been corrected. Routinely utilize all safety measures as related to work orders and specific task. Safety and Emergency ResponseComply with all safety regulations to include but not limited to hospital regulations, OSHA and other applicable guidelines. Maintain work area in a safe, clean and orderly manner. Communicate effectively to other biomedical engineering personnel in regard to hazards associated with biomedical equipment testing in the shop. Act as a member of the internal engineering emergency response team. Primary Location: District of Columbia-WashingtonWork Locations: CN Hospital (Main Campus) 111 Michigan Avenue NW Washington 20010Job: Allied HealthOrganization: OperationsPosition Status: R (Regular) - FT - Full-TimeShift: DayWork Schedule: 8am - 430pmJob Posting: Jan 5, 2026, 7:00:42 PMFull-Time Salary Range: 54724. 8 - 107369. 6

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

6 Month Contract to hire ********** 8-10 years of experience with BAS Controls Experience must be from the mission critical environment including data centers, hospitals, or government facilities Prior experience writing Building Automation Systems programs and graphics. Johnson Controls, Siemens, Honeywell, Schneider, etc. In depth understanding of the Installation, configuration, and commissioning of HVAC control systems including DDC (Direct Digital Controls), sensors, actuators, and controllers Must be a US Citizen Must be able to successfully pass a BC + DT Plusses: Utility Plant Controls Experience Automated Logics PLCs Experience Tridium Niagara 4 (N4) Osha 30 NFPE 30 Any electrical experience! Day to Day: Our Client is seeking a skilled and motivated Controls Technician to join our most trusted energy client's commercial HVAC team. This role is responsible for installing, programming, troubleshooting, and maintaining building automation systems (BAS) and HVAC control systems to ensure optimal performance and energy efficiency. You will be responsible for troubleshooting and repairs to building-automation-system field cabinets, including communication devices, printed circuit boards, power supplies, electrical/electronic controls, sensors, and transducers. Safely perform point-to-point checkout per department standards, e.g., use multimeter to check continuity and/or resistance of sensors, verifying sensors with calibrated meters, breaking connection at end devices to verify IO channel assignments, verifying valve stroke and fail positions, etc. Mentor lower-level technicians to maintain these standards. Take initiative and responsibility for the checkout of end devices, module configuration, and troubleshooting network related issues. Responsible for the startup of simple to complex automation systems and mechanical equipment. Understands various protocols that may be integrated into the building automation system. Able to make complex program and graphic changes to meet specification and sequence. Communicate technical issues to management, project managers and/or more senior level technicians. Mentors and sets a good example for lower-level technicians.

Job Title: QC Microbiology Technician I Duration: 12 Months **Day Shift** 100% onsite (lab environment) Shifts: 4/10 (4 days x 10 hours/day) SUN-WEDS 7:00am-6:00pm* Job Description Working with the Quality Control team in supporting our efforts - cancer immunotherapy. This position provides Quality Control microbiological testing for clinical and commercial manufactured product, responsible for product testing, microbial growth promotion testing, utility testing and environmental monitoring. Responsibilities (include but are not limited to): • Perform environmental monitoring of cleanrooms • Collect water samples to ensure all sample collected per schedule and tested on time • Perform and review microbiological assays such as Gram Stain, Endotoxin, Sterility, Microbial Identification, Growth Promotion, Bioburden and Plate Reading • Perform and review visual inspection of final product • Data entry and trend data as needed and prepare slides for management • Assist in investigations regarding out of specifications (OOS) results, address and manage deviations related to micro procedures. • Routine maintenance of lab equipment and lab spaces • Review and approve all final product release test results • Perform other duties as required Basic Qualifications: • AA Degree and 1+ years' experience in Microbiology lab/Environmental Monitoring OR • AA Degree and 2+ years' experience in Microbiology lab/Environmental Monitoring OR Preferred Qualifications: • Experience in the application of microbiological techniques such as environmental air monitoring, water testing, surface monitoring • Experience in aseptic techniques and clean room operations • Ability to gown for entry into Aseptic core and supporting areas, and lift approximately 25 lbs. • Ability to pass vision exam for visual inspection • Knowledge of GMP, SOPs and quality control processes for commercial manufacturing • Proficient in MS Word, Excel, Power Point and other applications • Excellent interpersonal, verbal and written communication skills are essential in this collaborative work environment • Comfortable in a fast-paced small company environment with minimal direction and able to adjust workload based upon changing priorities • Ability to be flexible with schedule, and work overtime as needed