Engineering technician jobs in Greensboro, NC

Job Description HVAC Controls Technician Company: AC Corporation, a Crete United Company Pay Range: $34-$38/hour (DOE) Job Type: Full-Time | Field-Based | Travel Required AC Corporation, a Crete United Company, is actively hiring an experienced HVAC Controls Technician to join our growing Building Automation and Controls team. Based in Greensboro, NC, this is a field-focused role supporting commercial and industrial HVAC control systems, instrumentation, and VFD start-up. If you're looking to grow your expertise in Tridium, Carrier CCN, and other industry-leading systems-this is your opportunity. Key Responsibilities Troubleshoot and repair HVAC instrumentation, end devices, and control panels Loop check and assist with commissioning and system startup alongside controls programmers Install and terminate control wiring and instrumentation according to wiring diagrams and layout drawings Set up and configure Variable Frequency Drives (VFDs) Interpret electrical schematics and assist in routing conduit and cabling Travel to job sites throughout North Carolina and surrounding regions (1-2 week assignments as needed) Preferred Qualifications 3+ years of experience with Tridium Niagara programming (strongly preferred) 3+ years of experience in the HVAC service field Familiarity with Carrier, Tridium, CCN and other BAS/BMS platforms a plus Hands-on electrical installation and troubleshooting experience Strong understanding of building automation systems, HVAC controls, and system integration Comfortable working in commercial and industrial environments with minimal supervision Willingness to travel for out-of-town projects as needed What We Offer Competitive hourly pay ($34-$38/hour based on experience) Medical, dental, and vision insurance Company-paid life, short- and long-term disability insurance 401(k) with 100% company match up to 4% Three weeks of paid vacation in the first year Eight paid holidays per year Opportunities for certification training and long-term advancement Supportive work environment with local training and development opportunities at AC Corp and national resources through Crete United AC Corporation and Crete United are Equal Opportunity Employers. We welcome all qualified applicants, and proudly encourage women, minorities, and veterans to apply.

* 1) Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel to formulate engineering design and evaluation decisions: Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus. * 2) Sketches and builds or modifies jigs, fixtures, and instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel. * 3) Performs preventive and corrective maintenance of test apparatus and peripheral equipment. * 4) Installs or directs technical personnel in installation of unit in test chamber or other test facility. * 5) Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions, such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration. * 6) Analyzes and converts test data to usable form, using mathematical formulas, and prepares graphs and written reports to translate test results. * 7) May plan test program. * 8) May use computerized equipment and software to perform testing functions and produce graphs. * 9) May be designated according to equipment tested as Rocket-Control Technician; or according to nature of test as Environmental-Research Test Technician; Vibration Technician.

Do you like the idea of starting your day outdoors instead of at a desk? Do you take pride in hands-on work that makes a real impact on the success of a construction project? If so, a career as a Construction Materials Engineering Technician out of our Greensboro, North Carolina office might be exactly what you're looking for. As an Entry-Level Construction Materials Engineering Technician, you will receive the training and hands-on experience of how to test particular construction materials such as soil, concrete, asphalt, aggregate and more to ensure the project is built right. You'll be in the field helping ensure that the materials used to build everything from restaurants to stadiums meet the right standards for quality and safety. Your Day-to Day: Start with Concrete: Begin with concrete testing and sampling, then move on to other materials like soils, asphalt, and masonry. Train as You Go: Receive on-the-job training and certification support through the American Concrete Institute (ACI) and the International Code Council (ICC). Work Outdoors Year-Round: Enjoy working outside in various weather conditions, with changing environments and different crews on different sites. Testing and Reporting: Conduct and document tests on construction materials with precision. Ensure all laboratory and field equipment is well-maintained and properly calibrated. Collaborate with colleagues and work independently to ensure test results are logical, complete, and ready for review. Inspections and Compliance: Perform inspections of construction materials according to the International Building Code (IBC) and serve as a Special Inspection agent per certifications and IBC requirements. Review project plans, record observations and test results, and use Metafield to organize data. What You Bring: A High School diploma/GED Eagerness to gain experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials A valid driver's license and reliable transportation A certification from any of the following is a plus: American Concrete Institute (ACI): Field Testing Grade I, Strength Testing Technician, Laboratory Technician A strong ability to communicate effectively in English (speaking, reading, and writing) A basic understanding of math concepts related to weight, volume, pressure, and units of measurement Working Conditions and Physical Demands: Perform the physical demands of the position with the use of company-provide Personal Protective Equipment such as: Working outdoors the majority of the time in varying weather conditions Walking over rough, uneven terrain and standing for potentially up to 12 hours a day Routinely lifting and carrying 40-50lbs, (field/laboratory samples and equipment) Maneuvering field equipment safely, such as a loaded wheelbarrow, on uneven ground around active construction sites Working outside normal business hours, including some weekends We Are S&ME: At S&ME, we're committed to your growth, professionally and personally. With over 50 years of experience delivering innovative solutions in geotechnical, civil, environmental, and construction materials engineering, we've built a strong foundation for long-term careers. Our team of 1,000+ employee-owners across 10+ states works together to create meaningful impact for our clients and communities. When you join S&ME, you become part of a collaborative, honest, and people-focused culture that invests in your success. We offer exciting project opportunities, ongoing training, and a comprehensive benefits package to support you and your family. This is more than a job; it's a place to grow, thrive, and build a future. Here's what you can look forward to: Medical, Dental & Vision Plans with HSA and FSA options Wellness Program - $50 off per month on your 2027 premiums! Pet Insurance Term Life & Long-Term Care Coverage - available Spring 2026 100% Employee Stock Ownership Plan (ESOP) with a 5% company contribution 401(k) Retirement Plan Paid Holidays and Paid Time Off (PTO) - with rollover options Paid Maternity & Paternity Leave Mentorship & Career Development Programs Credential Incentive Program - get rewarded for advancing your skills Tuition Reimbursement Employee Recognition Program Company Vehicle & Fuel Card - for project-based roles $2,000 Employee Referral Bonuses - and more! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted.

30 hrs/week offered with comprehensive benefits package Pay Range: $36.00-$38.00/hour The selected candidate will be employed by the School of Government Services (SOG Services), but their work location and reporting responsibilities will be at Energy Services Co Generation plant. SOG Services assists faculty and staff at the UNC School of Government in carrying out its important mission: to improve the lives of North Carolinians by engaging in practical scholarship that helps public officials and citizens understand and improve state and local government. As a nonprofit organization and an official affiliated entity of the University of North Carolina at Chapel Hill, SOG Services also contributes to advancing UNC-Chapel Hill's broader mission of academic excellence, research, and public service. Water resources staff oversee the non-potable and stormwater systems on campus and coordinate with the local water and sewer provider to ensure effective and resilient water services on campus. Water resources is part of Energy Services, which provides utilities on campus. This role involves a mix of technical troubleshooting, preventive maintenance, and system repair responsibilities. The engineering technician is tasked with diagnosing and repairing instrumentation and control systems, including programming PLC ladder logic, while collaborating with non-potable water customers to ensure system performance meets operational needs. Preventive maintenance duties include verifying plumbing connections for regulatory compliance, calibrating instrumentation, replacing consumables such as lamps and filters, and tuning control systems to maintain efficiency. In addition, the position will assist with troubleshooting and repairing stormwater and non-potable water infrastructure-such as underground pipes, cisterns, conduits, and electronic components-by coordinating with senior engineering staff and managing small repair projects. This role is full-time (30 hours/week ) non-exempt and will be compensated on an hourly basis. Essential Duties and Responsibilities- Instrumentation & Controls (30%) Troubleshoot and repair instrumentation and control systems, including pumps, VFDs, and PLCs and various sensors. Repair and replace Collaborate with non-potable water customers to adjust operation sequences and instrument settings to ensure system performance meets operational needs. Using ladder logic program to adjust control sequences and instrument settings to optimize system efficiency. Basic repairs of instruments and controls for non-potable water systems including VFDs. Preventive Maintenance (30%) Conduct preventive maintenance on non-potable water systems. Verify plumbing connections for regulatory compliance. Ensure instrumentation is functioning properly; coordinate calibration as needed. Replace lamps, filters, and other consumables. Tune and test control systems to maintain optimal performance. System Troubleshooting & Repairs (30%) Diagnose and resolve issues in stormwater and non-potable water systems in coordination with senior engineering staff. Direct and complete repairs using a tiered approach: First preference: complete work with Water Resources (WR) staff. Second preference: complete a work order for facilities staff to complete work. Third preference: hire an outside contractor through facilities and/or purchasing. Maintain and repair infrastructure including: Underground pipes, structures, conduits, and electrical/plumbing appurtenances. Cisterns, controls, electronics, and instrumentation. Administrative Support (10%) Assist with budget preparation and monitoring. Address billing questions and customer inquiries. Support customer relations by providing timely communication and solutions. Required Qualifications Experience with PLC ladder logic programming, preferably on Allen Bradley equipment. Ability to perform preventive maintenance tasks such as instrument calibration and control system tuning. Ability to troubleshoot and complete simple repairs with electrical and mechanical components such as VFDs and pumps. Proven ability to diagnose and resolve system issues in coordination with engineering staff and facilities teams. Strong communication skills for collaborating with customers, contractors, and internal staff. Organizational skills to document repairs, maintenance activities, and system performance. Associates degree in a relevant technical field, or at least 5 years relevant experience. Preferred Qualifications Advanced experience with PLC programming, instrumentation calibration, and control system optimization. Ability to repair and replace basic electrical components of non-potable water systems. Basic understanding of indoor plumbing. Knowledge of stormwater and non-potable water systems, including underground pipes, cisterns, conduits, and related infrastructure. Strong customer service orientation with experience addressing technical inquiries from non-technical stakeholders. Ability to manage contractors and coordinate multi-team repair projects effectively. Work Environment & Physical Requirements The position will perform a combination of office work and hands-on repair and maintenance of building equipment. Must be able to stand for extended periods and perform labor in tight and inconvenient spaces. Physical effort may include walking on uneven terrain, lifting access lids, and may include occasional confined space entry with proper PPE and training.

Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technicians to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materials-including soil, concrete, and masonry-in accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance with project specifications and documenting field results accurately and clearly. The position requires physical stamina, attention to safety protocols, reliable transportation, and the ability to obtain industry certifications such as ACI, ICC, and OSHA. Successful candidates will demonstrate a commitment to quality, safety, and professionalism while working in dynamic construction environments. Requirements Education: Engineering technicians must have a high school diploma or the GED high school equivalency credential. Certification: Engineering technicians will obtain and maintain relevant ACI, ICC, and OSHA certifications, as well as other certifications as deemed appropriate by their supervisor. Pre-employment Requirements: Drug Testing: All job applicants will undergo testing for the presence of illegal drugs as a condition of employment. All employees will follow Geo-Hydro Engineers' Drug Free Workplace Substance Abuse Policy. Driving Record: Engineering technicians will have a valid driver's license with no violations that prevent them from being insured through the company's insurance carrier. The ability to be insured is at the discretion of the company's insurance carrier. The insurance carrier routinely reviews employee's driving records and may determine at any time than any employee will no longer be permitted to operate any company vehicle. Job Responsibilities and Requirements: Observation: Engineering technicians must be able to observe construction work for compliance with applicable project drawings and specifications, and for general accordance with International Building Code requirements. Testing: Engineering technicians must be able to perform field and laboratory testing of soil, stone, concrete, grout, masonry, and other construction materials in accordance with ASTM standards. Applicable ASTM standards include but are not limited to the following: D-698, D-1557, D-1556, D-2937, D-2216, D-6938, C-31, C-143, C-173, C-231, and ASTM STP 399. Documentation: Engineering technicians document field observations and test results by writing legibly in English with proper grammar. Basic mathematics (addition, subtraction, multiplication, and division) is an integral part of all testing and reporting. Safety: Engineering Technicians must wear appropriate personal protection equipment (PPE), attend safety training sessions, and follow the requirements within the Geo-Hydro Safety and Health Manual. Physical Requirements Lifting: Must be able to lift, load and unload soil, sand, asphalt, CMU, and concrete samples weighing up to 100 pounds. Concrete Sampling and Testing: Must be able to maneuver a 6-cubic foot wheelbarrow loaded with 150-200 pounds of fresh concrete for up to 50 yards over uneven ground. Unit weight testing requires lifting a 50-pound container of concrete. Six-inch compressive strength test cylinders weigh 30 pounds each. Volumetric air content testing requires repeated swinging of the 30-pound concrete-filled test device from knee-level to head-level. Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel. Must be able to load and unload a 90-pound case containing a nuclear density gauge and carry the 50-pound nuclear density gauge by hand for up to 50 yards over uneven ground. Hand Auger and Penetrometer: Must be able to manually hand auger down to 10 feet into soil to obtain samples and perform portable dynamic cone penetrometer testing. The hand auger may require up to 50 pounds of pull to remove it from wet soil conditions. The total weight of the dynamic cone penetrometer ranges from 20 to 40 pounds. Operation of the penetrometer requires repeated raising and dropping of the 15 pound slide weight.

Job DescriptionJob Title: Electromechanical Technician- Up to $36.16/hour! Follow procedures to perform required PM programs and general maintenance tasks including electrical, mechanical, pneumatic and hydraulic repairs Read and interpret electrical, mechanical, pneumatic and hydraulic schematics for troubleshooting and repair of all plant equipment Use and troubleshoot variable speed AC and DC drive controllers. Understand servo motion controls, incremental and absolute position encoders and resolvers Analyze and repair PLC controlled equipment using the appropriate techniques and peripheral equipment Conduct root cause failure analysis and use problem solving techniques to ensure effective repairs on equipment Work to continuously improve the machines and the standardized procedures used to maintain them. Core Skills and Qualifications: High school diploma or equivalent required. Minimum two years' experience as an Electromechanical Technician. Strong electrical and mechanical troubleshooting experience required. Technical/vocational training and/or associate's degree preferred. Previous PLC experience with a working knowledge of Allen Bradley and/or Siemens PLCs. Must be a team player, have great communication skills and be flexible to accomplish the necessary tasks. Demonstrated ability to maintain accurate records, logs and files in a timely manner. About Spark Packaging: Spark Packaging is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize successful placement and retention, we start by listening to and understanding each of our clients. We believe in face-to-face interaction and having a solid understanding of our client's business before placement. We pride ourselves in team development as it matches our purpose as an organization to continually create career opportunities.

🚧 Senior Engineering Technician Opportunity! 🚀 Do you thrive on turning land development concepts into reality? Are you an expert in AutoCAD Civil3D and excited to work on diverse and impactful projects? FEI is looking for a skilled Senior Engineering Technician to join our dynamic team and make a difference in the land development industry! 🔧 Key Responsibilities: Use AutoCAD Civil3D to create site plans, parking layouts, subdivisions, streets, and utility designs, including water mains, sewer mains, and stormwater systems. Develop grading plans, erosion control plans, stormwater management plans, and final plats. Collaborate with Engineers to produce high-quality deliverables that meet project timelines and budgets. Process plans with governmental agencies for reviews and approvals. Ensure adherence to company standards, policies, and procedures while maintaining top-tier quality. 🎓 Qualifications: Education: High school diploma required (Associate's degree in civil engineering preferred). Experience: Minimum 5 years of relevant land development experience. Skills: Proficiency in AutoCAD Civil3D and Microsoft Office Suite. CAD certifications are strongly preferred. Experience with Ajera expense and timesheets or equivalent software is a plus. 💼 What We Offer: A collaborative and supportive work environment where your skills are valued. Opportunities to work on diverse, challenging projects that leave a lasting impact. A flexible schedule designed for work-life balance: Monday-Thursday: 7:30 AM - 5:30 PM Friday: 7:30 AM - 11:30 AM At FEI, we uphold the principles of Accountability, Integrity, and Relationships in everything we do. Join our team, and let's shape the future of land development together! How to Apply: If you're ready to take the next step in your career and join a forward-thinking company, we'd love to hear from you! Please note: We are only accepting direct applications at this time. Submissions from third-party recruiters or agencies will not be considered.

**City** Greensboro **Role Type** Permanent **WHO WE ARE** ITG Brands is the third-largest tobacco company in the USA with offerings of some of the most well-known cigarette, cigar, and e-vapor brands. As a member of the globally recognized Imperial Brands PLC family, we are a forward-thinking partner with operational integrity. ITG Brands is committed to putting consumers at the center of what we do, while creating an innovative workplace where inclusion, creativity, and bold thinking drive progress. This empowers us to bring our true selves to work, to collaborate more effectively through showing our passion and being confident to bring new ideas to the table. We are not afraid to seize opportunities and make things happen - both individually and collaboratively. We strive to exceed expectations by seeing things differently and doing things differently. This truly is a place where we all share a challenger mindset which drives our success. **What You Will Do** - JOB SUMMARY + Install electrical service and control devices to equipment using the standards set by the National Electrical Code (NEC). + Install and maintain facility power distribution systems (i.e., medium voltage switchgears, generators, transformers, buss duct and panelboards). + Install, test, maintain, diagnose, and correct problems in the various electrical, electro mechanical, electronic, pneumatic and hydraulic systems associated with cigarette manufacturing equipment (i.e., high speed automation, instrumentation, control wiring, microprocessor controls, PLC controls and communication networks, such as SLC500, TI, ControlLogix, CompactLogix, Semiens S7-300 and S7-400 and Twin CAT control systems). + Read and understand complex electrical schematics and ladder logic. + Follows company safe work practice guidelines. **Qualifications** - REQUIRED MINIMUM QUALIFICATIONS: + Be at least 21 years of age + Be legally eligible to work in the United States + Candidates must have completion of an approved apprenticeship program or be a trade school graduate with a minimum of 5 years related electrical/electronic experience. + Candidates with equivalent U.S. military training and related electrical/electronic experience will also be considered. + Must be able to work any of 3 shifts and overtime, including weekends and holidays as necessary. + Candidates will be required to pass a sample shop test. **Work Environment and Physical Demand** + Work in areas that are subject to noise, dust, vibration, and heat. + Sometimes required to do heavy lifting + Work in a variety of positions including awkward positions + Climb ladders and work at heights Safety is more than a priority at ITG Brands, it is a core value. We are committed to employee health, safety and well-being and a secure work environment. We strive to achieve and maintain compliance with the principles of sound environmental, industrial hygiene and safety management. ITG Brands is committed to safety by complying with federal, state, local, and corporate regulations; assessing risks and implementing appropriate safety measures; providing training; and leveraging technology through a behavior-based approach. ITG Brands fosters a culture of care and promotes a safe working environment because we care about our employees. Communication and teamwork are key principles used to develop and advance a positive atmosphere that attracts and retains top talent. **What We Offer** - Competitive benefits package that includes medical/dental/vision/life insurance/disability plans - Dollar for dollar 401k match up to 6% - 15 Company-paid holidays - Generous paid time off - Employee recognition and discount programs - Education assistance **Applicant Information** This describes the essential functions of the job at the time the was created, but it is not an exhaustive list of tasks, duties and responsibilities. In addition, the position may evolve or change over time and such changes may not be reflected in the job description until it is next updated. **Field 7** **ITG Brands and ITG Cigars provides equal employment opportunities.** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you have a concern about discrimination in the application or hiring process or you need an accommodation based on religion, disability or pregnancy in the application or hiring process, please contact us at ******************************* . **SHARE THIS JOB** The posting for the position for which you are applying highlights key aspects of the position only. It is not a complete description of the position. All candidates must consent to an independent investigation of their background, references, past employment, education, criminal record, and drug screening. Results of such background checks will be reviewed on a case-by-case basis, giving consideration to the nature of the information reported and its relevance to the specific job being sought before a decision is made using this information. ITG Brands and ITG Cigars provides equal employment opportunities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you have a concern about discrimination in the application or hiring process or you need an accommodation based on religion, disability or pregnancy in the application or hiring process, please contact us at ******************************* (Talen%74Acquisition%40%69t%67b%72ands.%63om) . We collect personal information from you in connection with your application for employment with ITG Brands or ITG Cigars. For more information, please see our Privacy Policy (****************************************** . If you are a job applicant from California, additional information can be found on our California Applicant Privacy Notice (******************************************************* . If you have questions, contact us atprivacy@itgbrands.com (priv%61%63y@i%74gb%72ands.co%6D) .

A SIGN -ON BONUS OF $7,458 IS AVAILABLE FOR THE SUCCESSFUL APPLICANT OF THIS POSITION PAID IN 2 INSTALLMENTS WITHIN 12 MONTHS OF HIRE : $3,729 WITHIN 30 DAYS OF HIRE DATE AND $3,729 12 MONTHS AFTER HIRE DATE . This recruitment is for two (2) Electronic Specialists positions. By applying, you will be considered for both positions: 00037285, 00037287 This position requires an advanced level skill set in Instrumentation, Controls and Electrical (IC&E) with an expertise in two or more complex control/electrical systems. The skills required for this position involve the ability to work independently on instrumentation, controls and electrical components, equipment and systems in very complex steam and electric generating facilities to ensure that they operate safely and reliably. This position is an expert on two or more major control/electrical systems in a power plant such as: Distributive Control Systems ( DCS ), program logical controllers ( PLC ), continuous emission monitoring system ( CEMS ), variable frequency/speed drives ( VFD or VSD ), turbine governor control systems, voltage regulators, digital instruments air systems or control valves. This position will provide leadership to and train junior technicians. This position is responsible for the installation, preventive, predictive, corrective maintenance, troubleshooting and repairs of the boilers, all associated balance of plant auxiliary equipment and fuel handling systems. The specific control and electrical equipment consists of PLC's, CDS , VFD , VDS's, plant electrical systems consisting of 12.47kV, 4.16kV, 2.3kV, 480V and 120/280V, 480V motor control centers, CEMS , scientific analyzers for the water chemistry, steam turbine and diesel generator voltage regulators and governor control systems, electrical protective relaying. The electrical, instrumentation and control circuitry on the following equipment and systems are: instrument air, fans, pumps, valves, control valves, mills, cooling towers, fluid drives, air compressors water treatment systems, bag houses, fuel handling systems, stack lights and rail road crossing signals. This requires an understanding of said systems, equipment and components. This position will program, modify and tune PLC's and DCS digital and analog control loops. It will also be able to develop, implement and revise control graphics, daily reports and the historian on the DCS . This position is to be conversant with the EPA and DAQ regulatory requirements as they pertain to the CEMS . Safe work practices are expected to be followed whenever working with equipment. Required Qualifications, Competencies, And Experience Experience in the repair and maintenance in a variety of electrical/electronic equipment or systems. Must operate state vehicles so candidate must possess a valid North Carolina driver's license or ability to obtain prior to hire. This position must participate in rotational On-Call duty. Must have the ability to work in extreme weather conditions including extreme heat/cold, direct sun, precipitation and/or wind. Must be able to remain in a single or stationary location/position for extended periods of time. Must have ability to ascend/descend stairs in buildings without an elevator. This position will require employee(s) to enter confined spaces or hazardous environments with the appropriate PPE in accordance with established procedures. This position is an Adverse Weather and Emergency Event Position. The employee in this position is designated as a Mandatory Employee. As such, it is expected to report to work or remain on the worksite, and if deemed necessary by their supervisor, to work a differing schedule or shift than normally assigned. This position is considered Communicable Disease Mandatory On-site Primary. As such, the position performs functions that are essential to the continuation of core University operations, including utilities, during a potential health emergency. Must be able to remain in a single or stationary location/position for extended periods of time. Must have ability to ascend/descend stairs in buildings without an elevator. This position will require employee(s) to enter confined spaces or hazardous environments with the appropriate PPE in accordance with established procedures. Preferred Qualifications, Competencies, And Experience Associate's degree in electronics; or equivalent combination of training and experience. All degrees must be received from appropriately accredited institutions. Work Schedule Monday - Thursday. 7:00AM - 5:30PM. Occasional nights, weekends and/or holidays may be required should business needs dictate. On-call rotation. Communicable Disease Mandatory On-site position. Emergency Duty & Adverse Weather Position.

About the role: The Electrical Engineering Technician/Electrical Engineer will have the opportunity to perform a broad range of work tasks with guidance and support from other engineering and management staff. Hydro-electric equipment and duties within the scope of this position includes but is not limited to generators, governors, excitation systems, generator circuit breakers, switchgear, switchboards, motor control centers, motors, control boxes, relay panels, lighting systems, power distribution systems and components, instrumentation (level, flow, pressure, temperature, vibration), and diesel engine-generator sets. A representative cross section of anticipated responsibilities is presented below. Why Eagle Creek? A comprehensive benefits plan: Medical, Dental, Vision, HSA, FSA, Commuter benefits, Voluntary Life, 401(k) Match. Eleven paid holidays per year, plus a competitive PTO schedule and time off to volunteer or give back to your community. Access to a company-funded Employee Assistance Program. Employee discounts through ADP LifeMart. Tuition Reimbursement as well as access to trainings & mentors for Career Progression and Personal Development. What you'll do: Prepare specifications and other engineering documents to procure, install, and commission a wide variety of hydro-electric equipment and systems. Plan and direct hydro-electric equipment refurbishment projects from disassembly to return to service. Troubleshoot equipment failures and perform root cause analysis to eliminate repeat failures. Represent the company at shop inspections and factory acceptance tests related to hydro-electric systems to ensure equipment in shop meets specifications and Industry codes. Direct contractors and hydro project staff at facilities to accomplish equipment repair and upgrades; ensuring electrical documents are updated to reflect field changes. Provide operations & maintenance with industry best practices that drive equipment operational reliability and minimize unplanned downtime. Manage project implementation and complete projects on time and on-budget. Collaborate with other engineering disciplines (mechanical, controls) to support project integration. Utilize equipment predictive data analysis to enhance equipment performance and recommend outage schedules for performing preventative maintenance. Develop electrical schematics and drawings to guide installation and maintenance of hydro-electric equipment and systems. What skills and experience you'll need: Bachelor's degree in engineering or a minimum of four years' work experience in a related field. Travel as required for project supervision and execution (~30%). Strong understanding of power systems, including generation, transmission, and distribution. The ability to work effectively in a team environment and collaborate with other disciplines. Experience with industrial electrical systems and maintenance practices. The ability to perform operational tasks which may include: The ability to climb ladders and to work at heights on or near water. The dexterity to manipulate various size components from valves to small electrical switches to computer keyboards. The ability to "handle" rapidly changing situations under stress. Eagle Creek Renewable Energy, LLC is an equal opportunity employer

Job Description: The Electronic Technician III performs intermediate- and depot-level maintenance on complex electronic systems and subsystems supporting TADSS operations. Responsibilities include fault isolation, component-level troubleshooting, preventive maintenance, and system documentation. Key Responsibilities: Maintain and repair advanced electronics and computer-controlled subsystems Conduct preventive maintenance, diagnostics, and calibration Record maintenance actions using DA 2408 forms and enter data in ISTS and/or Maximo Support periodic inspections, updates, and scenario management Comply with FTR and support PMCS travel if directed Communicate effectively with government site leads, peers, and other representatives Maintain accountability of CFE/GFE and ensure compliance with safety and cybersecurity policies Minimum Qualifications: 5+ years of experience in electronics maintenance or simulation systems Proven ability to troubleshoot and repair down to the component level Familiarity with Army maintenance systems and documentation procedures Must meet the classification criteria for CBA-covered Electronic Technician III Security+ or related IT/cyber certification preferred (not required for this TDL)

Job Posting: Exciting Opportunity for Electronic Technician Company Overview: Join the forefront of innovation at JTI Liggett, where we lead the charge in high-speed manufacturing excellence within the tobacco manufacturing industry. We pride ourselves on pushing technological boundaries and delivering unparalleled quality and efficiency. As a member of our team, you'll be instrumental in shaping the future of manufacturing. Position: Electronic Technician Location: Mebane, NC Job info: $43.65/hour; 6% 401k match; 5 days PTO Job Type: Full-time (40 hours, including paid lunch breaks, 8-hour shifts); Overtime available (Time and a half paid for hours worked over 8 in a day; double time paid after 12 hours worked in a day) Job Description: Are you ready to take on a pivotal role as an Electronic Technician in our dynamic production environment? At JTI Liggett, you will be at the heart of maintaining and optimizing our cutting-edge manufacturing equipment. Your expertise in electronics will ensure our systems run smoothly, maximizing productivity and reliability to meet our ambitious goals. Exciting Responsibilities Await: Install, maintain, and enhance electronic components and systems on our advanced high-speed manufacturing equipment. Troubleshoot and diagnose electrical and electronic issues, implementing effective solutions to minimize downtime. Tackle complex electrical challenges, including converting systems from 480V AC to 24V DC, to support diverse operational needs. Collaborate closely with our engineering and production teams to implement innovative upgrades and improvements that set new industry standards. Conduct meticulous preventive maintenance routines to uphold peak performance and minimize downtime. Document your contributions with precision in our state-of-the-art maintenance tracking systems (CMMS), ensuring a transparent and efficient workflow. What We're Looking For: An innovative thinker with an Associate's Degree in Electronics Technology, Electrical Engineering Technology, or a related field, or equivalent practical experience. Demonstrated expertise (5 years or more) as an Electronic Technician in a high-speed manufacturing environment, with a passion for leveraging technology to drive operational excellence. (A combination of education and experience will be considered.) Proficiency in deciphering electrical and electronic schematics and technical manuals, coupled with a hands-on approach to troubleshooting and problem-solving. Flexibility to thrive in a dynamic work environment, including availability to work 1st, 2nd or 3rd shift to support our around-the-clock operations. Why Join Us? At JTI Liggett, you'll be part of a vibrant culture that values collaboration, growth, and innovation. We offer competitive compensation packages, comprehensive benefits, and opportunities for professional development. Join us and be part of a team that's reshaping the future of manufacturing technology. Ready to Make Your Mark? If you're energized by the prospect of contributing to groundbreaking advancements in manufacturing technology, we invite you to apply online today at Electronic Technician - Mebane, NC Job Details | JT International S.A. Come join us at JTI Liggett, where your skills will be valued, and your career will thrive in an environment that celebrates creativity and excellence. JTI Liggett is an equal opportunity employer committed to fostering an inclusive and diverse workplace environment.

Starting at $34.57 - $43.21/hr. We may pay full rate upon hire, dependent on experience. KEY ACCOUNTABILITIES Modify, maintain and install PLC programs. Identify PLC problems, troubleshoot and maintain updated documentation and wiring changes. Install and/or change the layout of machines and mechanical equipment in a plant layout and assemble as necessary, conforming to building codes and similar specifications. Perform duties such as dismantling, moving, installing or repairing shafting conveyors hoists and other equipment. Use measuring devices in constructing machine foundations and installing machines and equipment in correct position. Receive wiring diagrams, drawings, specifications and instructions covering scheduled and emergency repair installation and inspection work to be done. Plan and perform work requiring a thorough knowledge of electrical and electronic theory and principles wiring specifications codes properties of various materials and principles of operation and application of electronic equipment. Analyze all types of circuits, wiring, diagrams, networks and drawings as required to install, repair, adjust, calibrate, construct, modify, replace or service all types of electronic devices and systems, including communication systems, electronic gauges, controls and regulator power and distribution control equipment measuring recording processing and indicating devices. Perform industrial truck repair and maintenance work on all industrial and small motorized equipment with gas, diesel, propane and electrical motors. Install, repair and maintain refrigeration and air condition systems and equipment. Operate and maintain heating systems, boilers, pumps, mixes, compressors and other related equipment. Make sketches of parts and layouts design and construct adaptations or conversions of component parts including the necessary phases of development work. Perform Preventative Maintenance inspection of assigned equipment report findings and take appropriate action. Write and perform maintenance work orders as required. Make mechanical and electrical repairs as required in servicing electronic equipment including assembling modifying repairing and replacement of individual electronic parts within components circuit modules and printed circuit boards. Service electronic equipment by checking, testing and replacing faulty components, circuit modules, printed circuit boards and similar electronic devices. Maintain, install or repair all communication cables power distribution cables and wiring splicing as required. Perform any and all types of plant wide electrical maintenance, including installation of electrical conduit. Determine need, analyze and make all necessary running adjustments, repairs, overhauls and replacement of parts to all electrical equipment. Maintain performance inventory and maintenance records for electrical and electronic equipment. Advise operators, mechanics and other electrical maintenance personnel of standard operating procedures and requirements for electronic and electrical equipment and controls. Notify supervisor of potentially dangerous electrical equipment noted and corrective action taken. Operate equipment and assist production as directed. KNOWLEDGE, SKILLS, EXPERIENCE High school diploma required. Mechanically inclined, familiar with hand tools and PPE requirements. Possess heavy industrial/manufacturing experience in a high speed operation, working with hydraulic pneumatic driven equipment. Must be able to independently program, troubleshoot, and repair PLC s and VFD s and create new programs. Be able to demonstrate proficiency with specific PLC systems, including but not limited to Siemens AllenBradley Rockwell etc. Have 3+ years manufacturing industry electrical experience or a combination of training and experience Ability to pass the Ramsay ElectTest at 50% or higher. About Ardagh Metal Packaging Ardagh Metal Packaging (AMP) is a leading supplier of sustainable, infinitely recyclable metal beverage cans to brand owners globally. An operating business of sustainable packaging business Ardagh Group, AMP is a leading industry player across Europe and the Americas, with innovative production capabilities, 23 production facilities, more than 6,000 employees and recorded revenues of $4.8 billion in 2023. AMP is 76%-owned by Ardagh Group and is listed on the New York Stock Exchange under the ticker AMBP. About Ardagh Group Ardagh Group is a global supplier of infinitely recyclable metal and glass packaging solutions, producing packaging for brand owners around the world. We have grown to a team of approximately 20,000 people with revenues of more than $9 billion. Today we have a presence across the Americas, Europe and Africa. · Ardagh produces many of the beverage cans and bottles that contain your favourite beverages. · Our packaging is manufactured from metal and glass - permanent materials that can be infinitely recycled without any loss of quality. · Ardagh produces more than 60 billion containers per year (more than 160 million containers per day). The future we're creating for Ardagh is built around our four Core Values of Inclusion, Trust, Teamwork and Excellence. We offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team - you'll enjoy the journey!

Manufacturing Engineering Technician BH Job ID: 3184 SF Job Req ID: 15519 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Manufacturing Engineer Technician Location: Mocksville, North Carolina (Onsite) Shift: 7:00am-4:00pm About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Ingersoll Rand Mocksville is looking for a Manufacturing Engineer Technician to assist their team of manufacturing engineers in special projects. This role will be a contributor to various projects throughout the plant and gain relevant knowledge to processes and procedures in a manufacturing environment. Responsibilities: * Learn and understand different manufacturing methods and processes * Evaluate current processes and make recommendations for improvement based on our guiding principles of Safety, Quality, Delivery, Inventory and Performance * Assist in Drop Zone Changes, BOM updates * Communicate with internal and external engineering functions effectively * Present and communicate information to peers and management * Lead or support Kaizen activities * Lead or support standardization initiatives * Drive Quality Improvements and efficiency improvements on production line * Interface with other internal groups or organizations Requirements: * Must be currently pursuing or currently hold a bachelor's in manufacturing engineering, industrial engineering, or mechanical engineering * 1+ years of experience with basic CAD/CAM software skills Core Competencies: * Leadership skills * Teamwork skills * Problem-solving skills * Good information technology skills * Excellent communication skills * Ability to work in a team environment and take initiative Preferences: * Must be currently pursuing or currently hold a master's in manufacturing engineering, industrial engineering, or mechanical engineering What we Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

Sirius Staffing is seeking an Electronic Technician for a Temp-to-Hire role in Whitsett, NC. Schedule: Monday-Thursday, 6:00 AM-4:00 PM Overtime: Fridays, 6:00 AM-4:00 PM Pay: $21.00/hour This is a hands-on manufacturing support role for someone who likes working on the production floor, troubleshooting issues, and supporting electronics builds. You'll help keep electronics manufacturing lines running smoothly by inspecting products, supporting test and debug activities, assisting with new product launches, and helping document and improve processes.You'll work closely with engineering, quality, and production teams and spend most of your time on the floor, at test stations, or reviewing data, not behind a desk all day. What You'll Do Day-to-Day Support electronics assembly and test processes on the manufacturing floor Perform visual and physical inspections of electronic assemblies (PCBs, cables, sub-assemblies) Assist with basic troubleshooting and failure analysis when products fail test Help introduce new electronic products into production and support early builds Collect production and test data to identify trends, defects, or process issues Perform time and motion studies to help improve line flow and efficiency Help update and maintain: Work instructions Test procedures Training documents Line layouts (AutoCAD experience is a plus) Assist with Bill of Materials (BOM) updates and Engineering Change (EC) tracking in SAP or similar systems Participate in continuous improvement projects focused on quality, yield, and throughput Support root cause investigations using basic quality tools (5 Whys, Fishbone, 8D support) Nice-to-Have / Plus Skills Basic Python or scripting experience (used for data analysis, test data review, automation, or reporting) Experience pulling, cleaning, or analyzing manufacturing or test data Familiarity with electronics test equipment (multimeters, oscilloscopes, power supplies) Exposure to manufacturing execution systems (MES) or test systems Qualifications Education: Associate or Bachelor's degree in: Electronics Engineering Technology Electrical Engineering Technology Manufacturing or Industrial Technology Computer Engineering Technology Or a related technical field Experience: 1-3 years in electronics manufacturing, test, quality, hardware support, or engineering technician roles preferred Skills: Comfort working hands-on with electronic hardware Basic understanding of quality and process improvement concepts (PDCA, FMEA, 8D) Lean or Six Sigma exposure is a plus (certification not required) Strong attention to detail and willingness to learn Sirius Staffing is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to characteristics such as race, color, national origin, religion, gender, age, marital status, disability, veteran status, citizenship status, sexual orientation, gender identity, or any other status protected by law.

Job DescriptionAbout the role: The Electrical Engineering Technician/Electrical Engineer will have the opportunity to perform a broad range of work tasks with guidance and support from other engineering and management staff. Hydro-electric equipment and duties within the scope of this position includes but is not limited to generators, governors, excitation systems, generator circuit breakers, switchgear, switchboards, motor control centers, motors, control boxes, relay panels, lighting systems, power distribution systems and components, instrumentation (level, flow, pressure, temperature, vibration), and diesel engine-generator sets. A representative cross section of anticipated responsibilities is presented below. Why Eagle Creek? A comprehensive benefits plan: Medical, Dental, Vision, HSA, FSA, Commuter benefits, Voluntary Life, 401(k) Match. Eleven paid holidays per year, plus a competitive PTO schedule and time off to volunteer or give back to your community. Access to a company-funded Employee Assistance Program. Employee discounts through ADP LifeMart. Tuition Reimbursement as well as access to trainings & mentors for Career Progression and Personal Development. What you'll do: Prepare specifications and other engineering documents to procure, install, and commission a wide variety of hydro-electric equipment and systems. Plan and direct hydro-electric equipment refurbishment projects from disassembly to return to service. Troubleshoot equipment failures and perform root cause analysis to eliminate repeat failures. Represent the company at shop inspections and factory acceptance tests related to hydro-electric systems to ensure equipment in shop meets specifications and Industry codes. Direct contractors and hydro project staff at facilities to accomplish equipment repair and upgrades; ensuring electrical documents are updated to reflect field changes. Provide operations & maintenance with industry best practices that drive equipment operational reliability and minimize unplanned downtime. Manage project implementation and complete projects on time and on-budget. Collaborate with other engineering disciplines (mechanical, controls) to support project integration. Utilize equipment predictive data analysis to enhance equipment performance and recommend outage schedules for performing preventative maintenance. Develop electrical schematics and drawings to guide installation and maintenance of hydro-electric equipment and systems. What skills and experience you'll need: Bachelor's degree in engineering or a minimum of four years' work experience in a related field. Travel as required for project supervision and execution (~30%). Strong understanding of power systems, including generation, transmission, and distribution. The ability to work effectively in a team environment and collaborate with other disciplines. Experience with industrial electrical systems and maintenance practices. The ability to perform operational tasks which may include: The ability to climb ladders and to work at heights on or near water. The dexterity to manipulate various size components from valves to small electrical switches to computer keyboards. The ability to "handle" rapidly changing situations under stress. Eagle Creek Renewable Energy, LLC is an equal opportunity employer Powered by JazzHR DavV6dqd7t

Job Posting: Exciting Opportunity for Electronic Technician Company Overview: Join the forefront of innovation at JTI Liggett, where we lead the charge in high-speed manufacturing excellence within the tobacco manufacturing industry. We pride ourselves on pushing technological boundaries and delivering unparalleled quality and efficiency. As a member of our team, you'll be instrumental in shaping the future of manufacturing. Position: Electronic Technician Location: Mebane, NC Job info: $43.65/hour; 6% 401k match; 5 days PTO Job Type: Full-time (40 hours, including paid lunch breaks, 8-hour shifts); Overtime available (Time and a half paid for hours worked over 8 in a day; double time paid after 12 hours worked in a day) Job Description: Are you ready to take on a pivotal role as an Electronic Technician in our dynamic production environment? At JTI Liggett, you will be at the heart of maintaining and optimizing our cutting-edge manufacturing equipment. Your expertise in electronics will ensure our systems run smoothly, maximizing productivity and reliability to meet our ambitious goals. Exciting Responsibilities Await: Install, maintain, and enhance electronic components and systems on our advanced high-speed manufacturing equipment. Troubleshoot and diagnose electrical and electronic issues, implementing effective solutions to minimize downtime. Tackle complex electrical challenges, including converting systems from 480V AC to 24V DC, to support diverse operational needs. Collaborate closely with our engineering and production teams to implement innovative upgrades and improvements that set new industry standards. Conduct meticulous preventive maintenance routines to uphold peak performance and minimize downtime. Document your contributions with precision in our state-of-the-art maintenance tracking systems (CMMS), ensuring a transparent and efficient workflow. What We're Looking For: An innovative thinker with an Associate's Degree in Electronics Technology, Electrical Engineering Technology, or a related field, or equivalent practical experience. Demonstrated expertise (5 years or more) as an Electronic Technician in a high-speed manufacturing environment, with a passion for leveraging technology to drive operational excellence. (A combination of education and experience will be considered.) Proficiency in deciphering electrical and electronic schematics and technical manuals, coupled with a hands-on approach to troubleshooting and problem-solving. Flexibility to thrive in a dynamic work environment, including availability to work 1 st , 2 nd or 3rd shift to support our around-the-clock operations. Why Join Us? At JTI Liggett, you'll be part of a vibrant culture that values collaboration, growth, and innovation. We offer competitive compensation packages, comprehensive benefits, and opportunities for professional development. Join us and be part of a team that's reshaping the future of manufacturing technology. Ready to Make Your Mark? If you're energized by the prospect of contributing to groundbreaking advancements in manufacturing technology, we invite you to apply online today at Electronic Technician - Mebane, NC Job Details | JT International S.A. Come join us at JTI Liggett, where your skills will be valued, and your career will thrive in an environment that celebrates creativity and excellence. JTI Liggett is an equal opportunity employer committed to fostering an inclusive and diverse workplace environment.

Starting at $34.57 - $43.21/hr. We may pay full rate upon hire, dependent on experience. KEY ACCOUNTABILITIES * Modify, maintain and install PLC programs. Identify PLC problems, troubleshoot and maintain updated documentation and wiring changes. * Install and/or change the layout of machines and mechanical equipment in a plant layout and assemble as necessary, conforming to building codes and similar specifications. * Perform duties such as dismantling, moving, installing or repairing shafting conveyors hoists and other equipment. * Use measuring devices in constructing machine foundations and installing machines and equipment in correct position. * Receive wiring diagrams, drawings, specifications and instructions covering scheduled and emergency repair installation and inspection work to be done. * Plan and perform work requiring a thorough knowledge of electrical and electronic theory and principles wiring specifications codes properties of various materials and principles of operation and application of electronic equipment. * Analyze all types of circuits, wiring, diagrams, networks and drawings as required to install, repair, adjust, calibrate, construct, modify, replace or service all types of electronic devices and systems, including communication systems, electronic gauges, controls and regulator power and distribution control equipment measuring recording processing and indicating devices. * Perform industrial truck repair and maintenance work on all industrial and small motorized equipment with gas, diesel, propane and electrical motors. * Install, repair and maintain refrigeration and air condition systems and equipment. Operate and maintain heating systems, boilers, pumps, mixes, compressors and other related equipment. * Make sketches of parts and layouts design and construct adaptations or conversions of component parts including the necessary phases of development work. * Perform Preventative Maintenance inspection of assigned equipment report findings and take appropriate action. * Write and perform maintenance work orders as required. * Make mechanical and electrical repairs as required in servicing electronic equipment including assembling modifying repairing and replacement of individual electronic parts within components circuit modules and printed circuit boards. Service electronic equipment by checking, testing and replacing faulty components, circuit modules, printed circuit boards and similar electronic devices. * Maintain, install or repair all communication cables power distribution cables and wiring splicing as required. * Perform any and all types of plant wide electrical maintenance, including installation of electrical conduit. Determine need, analyze and make all necessary running adjustments, repairs, overhauls and replacement of parts to all electrical equipment. * Maintain performance inventory and maintenance records for electrical and electronic equipment. * Advise operators, mechanics and other electrical maintenance personnel of standard operating procedures and requirements for electronic and electrical equipment and controls. Notify supervisor of potentially dangerous electrical equipment noted and corrective action taken. Operate equipment and assist production as directed. KNOWLEDGE, SKILLS, EXPERIENCE * High school diploma required. * Mechanically inclined, familiar with hand tools and PPE requirements. * Possess heavy industrial/manufacturing experience in a high speed operation, working with hydraulic pneumatic driven equipment. Must be able to independently program, troubleshoot, and repair PLC s and VFD s and create new programs. * Be able to demonstrate proficiency with specific PLC systems, including but not limited to Siemens AllenBradley Rockwell etc. * Have 3+ years manufacturing industry electrical experience or a combination of training and experience * Ability to pass the Ramsay ElectTest at 50% or higher. About Ardagh Metal Packaging Ardagh Metal Packaging (AMP) is a leading supplier of sustainable, infinitely recyclable metal beverage cans to brand owners globally. An operating business of sustainable packaging business Ardagh Group, AMP is a leading industry player across Europe and the Americas, with innovative production capabilities, 23 production facilities, more than 6,000 employees and recorded revenues of $4.8 billion in 2023. AMP is 76%-owned by Ardagh Group and is listed on the New York Stock Exchange under the ticker AMBP. About Ardagh Group Ardagh Group is a global supplier of infinitely recyclable metal and glass packaging solutions, producing packaging for brand owners around the world. We have grown to a team of approximately 20,000 people with revenues of more than $9 billion. Today we have a presence across the Americas, Europe and Africa. * Ardagh produces many of the beverage cans and bottles that contain your favourite beverages. * Our packaging is manufactured from metal and glass - permanent materials that can be infinitely recycled without any loss of quality. * Ardagh produces more than 60 billion containers per year (more than 160 million containers per day). The future we're creating for Ardagh is built around our four Core Values of Inclusion, Trust, Teamwork and Excellence. We offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team - you'll enjoy the journey! Nearest Major Market: Salem Nearest Secondary Market: Winston

Job Description Join Us to Scale Lean Excellence Why This Role Be the engine behind better, faster, safer production. In this hands-on technologist role, you'll convert insights from the floor into standardized processes and measurable gains-while learning from experienced manufacturing engineers in a high-impact environment. Key Outcomes Document manufacturing processes and compare alternatives to elevate performance. Deliver improvement proposals anchored in Safety, Quality, Delivery, Inventory, Performance. Execute Drop Zone updates and bill-of-material changes with precision. Communicate effectively across internal/external engineering channels; present to peers and leadership. Lead or back Kaizen events and standard work rollouts. Boost quality metrics and production efficiency using root-cause and data analysis. Collaborate with cross-functional teams to align on change and sustainment. Qualifications Enrolled in a BS or MS program in Manufacturing Engineering, Industrial Engineering, or Mechanical Engineering. Foundational CAD/CAM proficiency. Strong teamwork, leadership potential, problem-solving, and communication skills. Comfort with digital tools; self-starter who thrives in a team setting. What You'll Gain Exposure to mission-critical technologies across 80+ brands and diverse industries. Mentorship from seasoned engineers and opportunities to lead initiatives. A culture that rewards ownership, accountability, and continuous improvement. Total Rewards Our benefits empower your wellbeing and growth: comprehensive medical and prescription coverage, dental and vision plans, wellness programs, life insurance, robust 401(k), paid time off, and an employee stock grant-plus additional resources designed to help you be your best. About Ingersoll Rand We combine the legacy of 160+ years of engineering leadership with the spirit of a startup. Customers count on our technology-driven excellence in flow creation and industrial solutions for the toughest conditions. Explore more at ************* Preferred Skills Industrial and Manufacturing Engineering Kaizen Lean Manufacturing Principles CAD/CAM Software Equal Opportunity Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances.