Engineering technician jobs in Minnesota - 879 jobs

This role is responsible for meeting daily customer demand and production schedules. The Manufacturing Technician I ensures safety and quality standards are maintained at all times. The Manufacturing Technician I will assemble products by using a variety of specialized equipment, fixtures, work instructions and test equipment to perform a series of operations to correctly produce/assemble/test medical devices. Work with Manufacturing Lead and/or Specialist to ensure customer demand and the production schedules are met. Participate in basic problem-solving activities to ensure stable operation of the work cell. Report problems or concerns with quality, processes, equipment, materials and labor to Manufacturing Lead or Production Supervisor. Observe, maintain, coordinate and complete standard work. Participate in DBS concepts and continuous improvement activities within designated work area. Sustain 5S activities by maintaining a clean and organized work area to facilitate manufacturing functions. Participate as an active member of the production team and assist in product processing. Follow documented policies and procedures as designated by the company's Quality System. Complete required documentation relating to regulatory requirements. Qualifications: Minimum Education & Experience: High school diploma or some work experience. Ability to read and follow documents such as safety rules, operating procedures, and work instructions. Ability to communicate effectively through oral and written communications. Ability to work with others collaboratively. Preferred:GMP knowledge Medical device manufacturing experience. Microscope experience Ability to analyze and solve problems. Physical Requirements: Must be able to work in areas that may contain adhesives, solvents, and chemical processes. Ability to frequently sit, stand, walk, reach with hands at arm's length, climb or balance, stoop, kneel, crouch, bend and twist. Ability to regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 50 pounds. Ability to observe and inspect small parts over extended periods of time Specific vision requirements include close vision and color vision. Must be willing and able to conform to controlled environments with regard to apparel and personal hygiene.

Adecco is partnering with TORO in Windom, MN to hire dependable seasonal Assemblers! This is a great opportunity to gain hands-on experience with a premier employer in the area. Temp-to-hire opportunities available based on attendance and performance. Schedule: Candidates must be available for BOTH 1st and 2nd shift as assigned. 1st Shift: Monday-Friday | 7:00am-3:30pm 2nd Shift: Monday-Friday | 4:00pm-12:30am Pay: $22.06/hour starting pay +$1.50/hour shift differential for 2nd shift Job Responsibilities Perform general assembly tasks including parts preparation, jig setup, fastening components, and related duties. Fit and secure parts using bolts, screws, rivets, adhesives, clamps, and jigs, utilizing both hand tools and power tools. Prepare parts for painting, including cleaning, sanding, masking, and staging as needed. Load and unload parts from conveyors; organize components into containers or stacks for efficient workflow. Prepare, load, seal, and label cartons for shipment or storage following company procedures. Pay Details: $22.06 to $23.56 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

MCE-Lead Designer/Engineer About MCE: Michaud Cooley Erickson is a full-service engineering firm providing high quality mechanical, electrical, lighting, fire protection, security, technology systems and energy management solutions for our clients, as well as unprecedented commissioning to facilitate efficient operations. We are a thriving culture with sustainable growth opportunities providing Innovative Engineering with Impactful Experiences. Job Summary: The role of Lead Engineer/Designer is the main point of contact for the technical aspects of projects and a key contributor to company technical standards. They coordinate with the Project Manager to ensure that projects meet the requirements for scope, schedule, budget, and quality. Responsibilities: Develops in-depth and industry leading knowledge in least one area of subject matter expertise. Develops and refines company technical standards (specifications, details, schematics, design guidelines, and best practices related to their subject matter expertise. Actively attends seminars, training sessions, and factory tours related to their area of expertise. Acts as technical support resource on projects requiring their subject matter expertise. Actively mentors less experienced technical staff. Promotes, uses, and trains others in using the master design tools and standards. Works independently to produce technical designs based on criteria from the client and project manager. Develops and documents the owner's project requirements. Generates multiple design options that meet the owner's project requirements for consideration, including pros and cons for each solution. Researches and resolves non-standard code questions with the authority having jurisdiction. Finds creative solutions to help our architectural partners realize their vision. Able to assess and analyze existing systems. Has a working knowledge of all design specialties within their discipline. Maintains knowledge of current design trends and best practices. Provides on-going technical guidance to the design team. Delegates technical design work to members of the project design team. Ensures that the design meets the quality expectations set by the project manager. Ensures coordination between all design disciplines and design partners. Ensures that the project team completes the design on schedule. Leads the construction administration phase, including attending construction meetings. Ensures that the design team completes design work within the hours budgeted by the project manager. Identifies and resolves design issues to ensure that we complete projects within the budget. Notifies the project manager if design services are requested outside the scope of work. Ensures that the QA/QC process is followed and documented. Contributes to and follows master design standards. Requirements You Will Need to Have: Associate or bachelor's degree in mechanical/electrical engineering or related field from an accredited university or college At least 6 years of related building systems industry experience Proficient in Revit and/or AutoCAD Proficient in design software tools Microsoft Office Suite of products experience We Prefer that You Have: Licensed Professional Engineer (P.E.) certification Design your career and future with MCE! In return, you will enjoy a wide range of benefits that support your health and wealth, including: Great Medical, Dental, & Vision benefits Employer paid short term/long term disability and life insurance. 401(k) with generous employer match Paid community service day and floating holiday Flexible workplace options-in office and hybrid Monthly parking allowance or bus pass Salary Range: $89,400 - $129,400 annually. Individual employee compensation is determined with a wide variety of factors, including but not limited to, experience, education, knowledge, skills, geography, and performance. Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Sponsorship is not available. Candidates must be legally authorized to work in the United States. MCE is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, sexual orientation, gender orientation, gender identity, national origin, disability, or protected Veteran status. Attention Recruitment Agencies: MCE does not accept unsolicited resumes from agencies. Please do not send resumes to our careers email or to any employees. MCE will not be responsible for any fees associated with unsolicited submissions. Only MCE's Human Resources Leadership can authorize third-party recruiting agreements. Any agreements made without proper authorization will not be recognized, and we will not be liable for any fees related to them. Thank you for your understanding.

Job Description The Mechanical Engineering Technician /R&D Lab Lead uses their advanced technical skills and hands-on experience to work closely with R&D Engineers during medical device development while providing leadership and direction for all R&D labs. They support project teams through device prototype building, test equipment and manufacturing equipment design and fabrication, 3D modeling and drafting, as well as supporting troubleshooting of mechanical designs. They utilize basic manual machining methods as well as 3D printing technologies to support prototype, test fixture, and manufacturing fixture development. They ensure that R&D labs are compliant with industry and company standards, and are well organized, well stocked, and ready for fast-paced engineering activities. DUTIES AND RESPONSIBILITIES: Assemble, rework, test, and troubleshoot mechanical components, assemblies, and prototypes for medical devices Manage centralized resource for 3D printing of prototype parts and assemblies, including ownership of 3D printing area to promote a clean and effective workspace, as well as material management and printer maintenance. Manage centralized resource for simple fixture and prototyping machining utilizing manual machining methods (mill, lathe, etc.). Manages machine shop area to promote a clean and effective workspace. Generate and refine 3D models and engineering drawings for fixtures, equipment, components, and device assemblies. Read, interpret, and assist in developing and refining assembly and test instructions, engineering prints, and schematics Set up, operate, troubleshoot and repair lab equipment, test equipment, and fixtures. Maintain and document equipment used in the ME lab and support other R&D lab owners as needed in these activities. Ensure R&D labs adhere to internal procedures, safety protocols and promote a clean and safe workplace environment Manage lab inventory, including components, tools, and consumables, for the ME and 3D print labs and support other R&D lab owners in these activities. Support audits and inspections by maintaining organized records and demonstrating lab compliance. Requirements Associate degree in Mechanical Engineering Technology or a related field; Bachelor's degree preferred. Minimum of 3 years of experience in a laboratory environment, preferably in the medical device industry. Strong leadership skills with experience managing a team or projects. Familiarity with mechanical testing methods, equipment, and regulatory standards. Excellent problem-solving abilities and attention to detail. Effective communication skills, both verbal and written. Ability to work collaboratively within a multidisciplinary team environment. Benefits Compensation: The expected salary for this position is between $35-40/hr, depending on experience, skills, qualifications. Health Care Plan (Medical, Dental & Vision) Retirement Plan with Company Match Paid Time Off, Personal Days, AND Birthday Holiday! Lifetime Membership Subsidy and Wellness Resources Life Insurance (Basic, Voluntary & AD&D) Family Leave (Maternity, Paternity) Short-Term & Long-Term Disability Taco Thursdays!!!

Basic Qualifications Associate's degree in related discipline or equivalent is required plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: Department of Defense Secret security clearance is preferred at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position Developing mission-critical systems that help keep people safe is what we do. At General Dynamics Mission Systems, you'll be part of the team that helps heroes make a true impact. The work we do is important. The challenges we face are career-defining. The opportunity we can offer is one-of-a-kind. We apply advanced technologies such as Artificial Intelligence, Blockchain, AR/VR, Cloud Native and Quantum Physics to solve our customers' missions in cyber, RF, undersea, interstellar and everything in between. ** THIS IS A 2ND SHIFT POSITION ** Working with Engineering, Operations Support and individuals in other departments, the Advanced Engineering Technician will support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment. This may entail performing the following: Interprets basic engineering drawings, diagrams and schematics Constructs, modifies, debugs, troubleshoots, calibrates, tests and adjusts a variety of tools, equipment and systems Conducts, analyzes and documents statistically based experiments to define process parameters Implements and documents complex solutions for process improvement Designs and constructs basic tooling and fixtures to accomplish unique tasks Organizes, analyzes and interprets data to identify cause/effect relationships and recommends resolution/process improvement What you'll experience: Technologies that aren't just top-notch, they're often top-secret A team of bold thinkers committed to exploring what's next Opportunities to gain new knowledge - as it's discovered What you bring to the table: An Associate's degree in related discipline or equivalent plus a minimum of 3 years of relevant experience Solid knowledge and proficiency in the use of fabrication tools Ability to fabricate complex hardware Solid knowledge of generally accepted technical theory What sets you apart: Team player who thrives in collaborative environments and revels in team success Commitment to ongoing professional development Superior communication and collaboration skills Testing product in a manufacturing environment Troubleshooting electronics to the component level Working in a team environment to meet our customers needs Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $32.83 - USD $35.22 /Hr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

The Engineering Technician II will work alongside Manufacturing Engineers supporting technical operations in a high-volume medical device contract manufacturing facility. This person is directly responsible for assembling prototypes, executing test protocols, documenting results, evaluating new manufacturing process instructions, and providing feedback to the engineering and manufacturing teams. This position will also assist with developing and maintaining tooling and fixtures. Essential Job Functions * First point of contact for technical support escalation for operations * Provide assembly process feedback to the engineering team * Responsible to monitor, inspect, setup, calibrate, and maintain manufacturing process equipment * Research and identify manufacturing or engineering solutions * Diagnose and troubleshoot technical issues, including but not limited to, machining, injection molding, laser processing, stamping, or packaging * Assist engineers as they create, modify, and test products and processes * Inspect products and processes for flaws and identify areas of improvement * Conduct tests and collect data in support of validation activities * Utilize and uses computer-aided design and drafting software * Develops production drawings for manufacturing * Reads and complies with work instructions, set up sheets, and checklists * Enters production information into the ERP system on a timely basis * Generate ECO/DCO and process documentation changes related to manufacturing changes, such as work instruction changes, print changes, documentation updates, etc. * Perform equipment set-ups as required * Support and comply with the company Quality System, ISO, and medical device requirements * Read, understand, and follow work instructions and standard work * Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance * Understand customer needs and the core business markets we serve * Ensure business systems are implemented, maintained, and functioning properly * Participate in required company meetings * Maintain an organized work area (5S) * Participate in the Operational Excellence Program * Complete all other work duties as assigned * Ability to work in a manufacturing environment Minimum Requirements, Education & Experience (incl. KSA's and certifications) * 3 years of experience working as an engineering technician * Knowledge of Good Manufacturing Practices & Quality Systems Regulations is desirable * Medical product experience * Must have good communication and documentation skills * Must have problem solving and critical thinking skills * Working knowledge of CAD software platforms AutoCAD, SolidWorks, or Pro-E experience is desired. * Ability to cross train in other areas of production when required * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail * PLC, Python, Vision Systems programming exposure * Ability to work in a fast-paced team environment * Ability to prioritize and multitask Desirable Criteria & Qualifications * Associate Degree in Engineering * 3-5 years of engineering experience Responsibilities Position summary The Engineering Technician will work alongside Manufacturing Engineers supporting technical operations in a high-volume medical device contract manufacturing facility. This person is directly responsible for assembling prototypes, executing test protocols, documenting results, evaluating new manufacturing process instructions, and providing feedback to the engineering and manufacturing teams. In addition, the person will assist with developing and maintaining tooling, fixtures, and a clean and well organized engineering lab space. Essential Job Functions First point of contact for technical support escalation for operations Provide assembly process feedback to the engineering team Responsible to monitor, inspect, setup, calibrate, and maintain manufacturing process equipment Research and identify solutions to manufacturing or engineering issues Diagnose and troubleshoot technical issues, including but not limited, machining, injection molding, laser processing, stamping or packaging Assist engineers as they create, modify, and test products and processes Inspect products and processes for flaws and identify areas of improvement Conduct tests and collect data in support of validation activities Utilize and uses computer-aided design and drafting software Develops production drawings for manufacturing Reads and complies with work instructions, set up sheets, and checklists Enters production information into the ERP system on a timely basis Generate ECO/DCO and process documentation changes related to manufacturing changes, such as work instruction changes, print changes, documentation updates, etc. Perform equipment set-ups as required Maintains an organized work area (5S) to include workstations, equipment, walkways, and locker rooms Participates in the Operational Excellence Program Understands and complies with the Cretex professional competencies, company policies, and employee manual Adheres to all safety policies; includes wearing personal protective equipment when required Supports and complies with the company s Quality System, ISO, and medical device requirements Completes all other work duties as assigned Minimum Requirements, Education & Experience (incl. KSA s and certifications) Minimum 3 years of experience working as an engineering technician Knowledge of Good Manufacturing Practices & Quality Systems Regulations is desirable Prefer medical product experience Must have good communication and documentation skills Must have problem solving and critical thinking skills Working knowledge of CAD software platforms AutoCAD, SolidWorks, or Pro-E experience is desired Pay Range USD $25.00 - USD $35.00 /Yr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Your tasks * Provide hands-on technical support for a 95% automated manufacturing environment, ensuring maximum equipment uptime across diecasting, trim/extraction/handling, machining & assembly, heat treat, straightening and grinding cells. * * Troubleshoot and repair automation and controls issues including PLC logic faults, safety circuit faults, sensor failures, communication/network issues, servo/drive faults, HMI alarms, and robot errors. * * Diagnose and resolve ABB robot issues including: * * Recovery from faults and collisions, mastering checks, calibration verification, tool/base data verification * * Program touch-ups and minor modifications as authorized * * I/O mapping validation, end-of-arm tooling (EOAT) integration checks, and cycle optimization support * * Support Siemens PLC-based systems by: * * Reading/diagnosing logic and trends, validating I/O, and performing controlled changes per site change-control * * Maintaining program backups/version control, restoring programs, and verifying commissioning parameters after repairs * * Maintain and troubleshoot industrial safety systems (e-stops, interlocks, gates, light curtains, scanners, safety relays/PLCs) and ensure compliance with LOTO and site safety standards. * * Troubleshoot and maintain industrial communication networks used in the plant (e.g., Profinet/Industrial Ethernet and related field communications), including device replacement, addressing, and communication fault resolution. * * Perform preventive and predictive maintenance tasks for automation assets: * * Robot PMs (grease, harness/cable inspections, batteries, axis checks) * * Controls cabinet PMs (fans/filters, thermal checks, loose connections, contamination control) * * Sensor/vision/measurement system cleaning and verification where applicable * * Support planned downtime and changeovers: * * Assist with start-ups, line clearance, recipe/parameter verification, and validation runs after maintenance * * Confirm interlocks, safe zones, and cycle readiness before releasing equipment to production Your profile * Automation/Robotics technician supporting a highly automated HPDC diecasting operation with integrated automated machining & assembly, heat treatment, and straightening/grinding lines. * * Expert in rapid troubleshooting and recovery of Siemens PLC-controlled equipment and ABB robot cells, including safety circuits, I/O, drives/servos, HMIs, and industrial networks. * * Proven ability to drive uptime and reliability through structured diagnostics, PM optimization, disciplined change control, and strong documentation. * * Collaborative, safety-first problem solver who partners with Production, Quality, and Engineering to execute RCA, reduce recurring faults, and improve cycle stability. Benefits Clear vision and purpose "We are a sustainability and innovation leader providing superior customer value" is our vision and this is what guides us. Our purpose "becoming better every day - since 1802" is what inspires us in our daily work. Sustainability and innovation focus We have high sustainability and innovation goals. Let's work towards a sustainable future together. Excellent learning tools At GF we provide development opportunities for everyone. We offer global learning tools as well as trainings and specialized courses. Great career opportunities GF as a global acting company provides many opportunities regarding career growth. We also offer a dedicated talent management process (MyNextBigStep@GF) to boost your career. Your contact Victoria Biascoechea Human Resources Director GFCS Augusta ************ Web E-Mail 430 Valencia Way 30906 Augusta United States View larger map Your work route Apply now Who we are GF Casting Solutions is one of the leading solution providers of lightweight components in the mobility and energy industry. As a future-oriented company, we act as a driving force for innovations in the foundry and additive manufacturing world and want to take the lead in shaping the development of sustainable mobility.

Job Description General Description: The Engineering Technician position is responsible for system specifications and review, design review, first builds, and electromechanical solutions. This position must be able to implement solutions and solve complex electromechanical problems, as well as tune and program controllers and drives for full system solutions and builds. This is accomplished through the following essential functions: • Advanced Manufacturing duties include machine prototyping, tool design and build, test plan development and execution. • Systems and Controls duties include working with customers to define motion profile, specifying systems and components to meet those requirements, integrating, programming, and testing. • Electronics duties include design and/or review of electronics for prototypes and production systems, circuit boards, and cables. • Maintain constant communication with supervisor about job progress. • Clean and maintain cleanliness of work area. • Complete other tasks as assigned. Job Requirements: • Successfully complete a criminal background check. • Regular and reliable attendance. • Flexibility to work overtime as business needs dictate. Skills & Abilities: • Ability to program in at least one language. • Ability to work with minimal supervision. • Ability to multi-task and work independently. • Demonstrated teamwork and team building skills. Work Experience & Knowledge Requirements: • Experience with Servo control systems. • Experience with Stepper control systems. • Experience with ISO Standards and Practices is preferred. • Background in prototyping. • Ability to read schematics, BOM's, Processes and test documentation. • Experience and proficiency with MS Office including Word, Outlook, and Excel. Education Requirements: • Completion of a High School diploma or General Education Degree (GED); or five (5) or more years' related production experience and/or training; or equivalent combination of education and experience. • Associates degree in a technical field is strongly preferred. • Laser Interferometry Certification is strongly preferred.

Medical Cretex Medical is a leading contract manufacturer of precision components and assemblies for the medical device industry. Our customers view us as a trusted partner in the areas of injection molding, laser processing, metal stamping and device assembly. Learn more at ********************** Position Summary: The Engineering Technician II will work alongside Manufacturing Engineers supporting technical operations in a high-volume medical device contract manufacturing facility. This person is directly responsible for assembling prototypes, executing test protocols, documenting results, evaluating new manufacturing process instructions, and providing feedback to the engineering and manufacturing teams. This position will also assist with developing and maintaining tooling and fixtures. Responsibilities * First point of contact for technical support escalation for operations• Provide assembly process feedback to the engineering team• Responsible to monitor, inspect, setup, calibrate, and maintain manufacturing process equipment• Research and identify manufacturing or engineering solutions • Diagnose and troubleshoot technical issues, including but not limited to, machining, injection molding, laser processing, stamping, or packaging • Assist engineers as they create, modify, and test products and processes• Inspect products and processes for flaws and identify areas of improvement• Conduct tests and collect data in support of validation activities• Utilize and uses computer-aided design and drafting software• Develops production drawings for manufacturing • Reads and complies with work instructions, set up sheets, and checklists• Enters production information into the ERP system on a timely basis• Generate ECO/DCO and process documentation changes related to manufacturing changes, such as work instruction changes, print changes, documentation updates, etc.• Perform equipment set-ups as required• Support and comply with the company Quality System, ISO, and medical device requirements• Read, understand, and follow work instructions and standard work• Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance Qualifications * 3 years of experience working as an engineering technician• Knowledge of Good Manufacturing Practices & Quality Systems Regulations is desirable• Medical product experience• Must have good communication and documentation skills• Must have problem solving and critical thinking skills• Working knowledge of CAD software platforms AutoCAD, SolidWorks, or Pro-E experience is desired. • Ability to cross train in other areas of production when required• Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher)• Clear and effective verbal and written communication skills • Attention to detail• Organizational skills • Ability to work in a fast-paced team environment• Ability to prioritize and multitask Desirable Criteria and Qualifications * Associate Degree in Engineering • 3-5 years of engineering experience What is it like to work at Cretex Medical? We recognize the contribution of every individual and promote growth, safety and security for all our employees. Cretex Medical values performance and pays competitive wages along with a rich benefit package. We offer a positive work environment with a focus on continuous improvement. Here are some of things that employees have said about working for Cretex Medical: * "The culture at Cretex is collaborative. Everyone here is willing to help you whether it is a director, a machinist, or your boss. Everyone is always willing to help you figure out a project and get it done right." * "I would tell potential interns that Cretex is a great company to work for. It has set a high bar for corporate culture as well as the quality of work you can do. I would definitely recommend it." * "I learned that I really like the medical device industry. The importance and the gravity of what we do here is felt by the employees. You can have that passion in your work because you know what you are striving for is to save lives." We encourage you to explore the many opportunities Cretex Medical can offer you as a valued team member. Pay Range USD $24.66 - USD $35.72 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Long Prairie Packing Company LLC, an American Foods Group Company has an opportunity for a Mechanical Engineering Technician II. Using principles and theories of mechanical engineering and working under the direction of the lead engineer, perform the following duties: Read and review blueprints, schematics, and project designs to determine test specifications and procedures. Investigate and evaluate machinery and equipment used by Long Prairie Packing to diagnose faulty operation and reporting conclusions to the lead engineer to ensure continued operations. Analyze test results related to design or rated specifications and make modifications as necessary. Repair, rework or calibrate hydraulic and pneumatic systems. Use tools ranging from precision measuring instruments and electrical and electronic testing devices to common hand. Perform work to keep machines, machine parts, mechanical or electrical equipment, wiring, structures or building systems in repair. Pipe fit, insulate, weld, plumb, machine, align, balance, assemble, disassemble, reassemble, install, maintain, replace, change, connect, disconnect, repair, test, inspect, operate, diagnose, troubleshoot, clean, lubricate, adjust, replace, setup, tear down, carpentry, routine or preventative maintenance. Use tools ranging from common hand and power tools such as hammers, hoists, saws, drills, screwdrivers, wrenches to precision measuring instruments and electrical and electronic testing devices. Perform other duties as assigned. Must be able to perform all job functions safely in accordance with food safety and quality standards. Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g. Cryovac, overhead chains, rail switches, conveyors, saws, etc.) Perform basic welding (e.g. primarily tig; some mig and stick). Ability to identify good and bad welds. Support the lead engineer in designing plans for performance of routine preventive maintenance (e.g. grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the physical condition of buildings does not deteriorate. Assemble, disassemble, repair, or replace defective equipment or parts (e.g., change belts, gearboxes, etc.) Perform basic hydraulics (e.g. change motors, make hoses, etc.). Complete necessary paperwork (PM sheets, work orders, etc.). Assist in performing maintenance on scale equipment (e.g. portable, floor, and matrix hot/cold) in applicable areas. Review wiring diagrams and engineering plans for assembling and installing electrical and electronic units. Ensure adherence to design specifications and applicable codes and standards. Install electrical parts and hardware using soldering equipment and hand tools. Perform basic forklift maintenance (change tires, replace bushings, etc.). NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal. Qualifications Minimum Qualifications (Required): Must be 18 years of age or older. Must be able to work in the United States without sponsorship. Diploma/GED. Two years of practical and theoretical knowledge/experience in mechanical engineering required, which may be obtained through course work, certifications, technical training programs, work experience and/or a combination of on-the-job experience and formal education. Prior experience using hand and power tools, precision measuring tools and the ability to read and work from drawings and blueprints. Must be able to work in a variety of work temperatures warm, hot, humid, cold, wet or with slippery surfaces at varied heights in and around moving equipment and parts with the use of personal protective equipment (PPE). Ability to work extended scheduled hours Monday through Saturday with daily overtime. Must be able to work overtime as required. Start times and hours vary based on production needs. Must be able to successfully complete training: Safety Safe Quality Food (SQF) Good Manufacturing Practices (GMPs) Hazard Analysis and Critical Control Point (HACCP) Standard Operating Procedures (SOPs) Food defense Sanitation Standard Operating Procedures (SSOPs) Lock out Tag out Forklift Pallet jack Preferred Qualifications: Prior maintenance experience in a USDA inspected beef, pork or poultry facility. Work history in the last 12 months. 6 months maintenance experience in a manufacturing environment. Knowledge, Skills, and Abilities: Knowledge of and ability to perform basic welding (e.g. primary tig; some mig and stick). Ability to identify good and bad welds. What We Offer: Base hourly range of $23.35 to $25.35 per hour. Comprehensive benefits packages include Medical, Dental, and Vision Insurance. 401(k) Disability Insurance Paid holidays Our company supports your career growth with ongoing learning and training programs. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. Applicants with a disability who require a reasonable accommodation for any part of the application or hiring process can contact Human Resources at the location(s) where you are applying. We participate in the E-Verify program in certain locations as required by law. Summary Long Prairie Packing Company, LLC an American Foods Group Company is a privately held beef processing company located in Long Prairie, Minnesota. We appreciate our employees and reward them for a job well done. As a member of the team, you will find yourself challenged and contributing in a significant way to the success of the business, and you will be rewarded for that success. Check Out the Long Prairie, MN Area! Improve your quality of life by residing in Long Prairie, Minnesota, a rural city located in the center of Minnesota - A short drive from many of the best recreational areas in Minnesota, and not too far from the Twin Cities and the ever-famous Mall of America! Long Prairie's museums, scenic golf courses, and historic buildings will fulfill your diverse interests. The area also offers: Long Prairie Trails - 4 well-kept trails that extend throughout the entire city Lake Charlotte Beach which includes a swimming beach, fishing pier and boat launch, softball fields, and much more! Year-round community events that the whole family will love.

Long Prairie Packing Company LLC, an American Foods Group Company has an opportunity for a Mechanical Engineering Technician II. Using principles and theories of mechanical engineering and working under the direction of the lead engineer, perform the following duties: Read and review blueprints, schematics, and project designs to determine test specifications and procedures. Investigate and evaluate machinery and equipment used by Long Prairie Packing to diagnose faulty operation and reporting conclusions to the lead engineer to ensure continued operations. Analyze test results related to design or rated specifications and make modifications as necessary. Repair, rework or calibrate hydraulic and pneumatic systems. Use tools ranging from precision measuring instruments and electrical and electronic testing devices to common hand. Perform work to keep machines, machine parts, mechanical or electrical equipment, wiring, structures or building systems in repair. Pipe fit, insulate, weld, plumb, machine, align, balance, assemble, disassemble, reassemble, install, maintain, replace, change, connect, disconnect, repair, test, inspect, operate, diagnose, troubleshoot, clean, lubricate, adjust, replace, setup, tear down, carpentry, routine or preventative maintenance. Use tools ranging from common hand and power tools such as hammers, hoists, saws, drills, screwdrivers, wrenches to precision measuring instruments and electrical and electronic testing devices. Perform other duties as assigned. Must be able to perform all job functions safely in accordance with food safety and quality standards. Identify and locate parts/part numbers from machinery or equipment manuals or parts catalogs (e.g. Cryovac, overhead chains, rail switches, conveyors, saws, etc.) Perform basic welding (e.g. primarily tig; some mig and stick). Ability to identify good and bad welds. Support the lead engineer in designing plans for performance of routine preventive maintenance (e.g. grease bearings, lubricate, check fluid levels, replace filters, etc.) to ensure that machines run smoothly, building systems operate efficiently or the physical condition of buildings does not deteriorate. Assemble, disassemble, repair, or replace defective equipment or parts (e.g., change belts, gearboxes, etc.) Perform basic hydraulics (e.g. change motors, make hoses, etc.). Complete necessary paperwork (PM sheets, work orders, etc.). Assist in performing maintenance on scale equipment (e.g. portable, floor, and matrix hot/cold) in applicable areas. Review wiring diagrams and engineering plans for assembling and installing electrical and electronic units. Ensure adherence to design specifications and applicable codes and standards. Install electrical parts and hardware using soldering equipment and hand tools. Perform basic forklift maintenance (change tires, replace bushings, etc.). NOTE: this description is not intended to be all-inclusive. An employee may perform other related duties to meet the ongoing needs of the organization; these duties are considered marginal. Qualifications Minimum Qualifications (Required): Must be 18 years of age or older. Must be able to work in the United States without sponsorship. Diploma/GED. Two years of practical and theoretical knowledge/experience in mechanical engineering required, which may be obtained through course work, certifications, technical training programs, work experience and/or a combination of on-the-job experience and formal education. Prior experience using hand and power tools, precision measuring tools and the ability to read and work from drawings and blueprints. Must be able to work in a variety of work temperatures warm, hot, humid, cold, wet or with slippery surfaces at varied heights in and around moving equipment and parts with the use of personal protective equipment (PPE). Ability to work extended scheduled hours Monday through Saturday with daily overtime. Must be able to work overtime as required. Start times and hours vary based on production needs. Must be able to successfully complete training: Safety Safe Quality Food (SQF) Good Manufacturing Practices (GMPs) Hazard Analysis and Critical Control Point (HACCP) Standard Operating Procedures (SOPs) Food defense Sanitation Standard Operating Procedures (SSOPs) Lock out Tag out Forklift Pallet jack Preferred Qualifications: Prior maintenance experience in a USDA inspected beef, pork or poultry facility. Work history in the last 12 months. 6 months maintenance experience in a manufacturing environment. Knowledge, Skills, and Abilities: Knowledge of and ability to perform basic welding (e.g. primary tig; some mig and stick). Ability to identify good and bad welds. What We Offer: Base hourly range of $23.35 to $25.35 per hour. Comprehensive benefits packages include Medical, Dental, and Vision Insurance. 401(k) Disability Insurance Paid holidays Our company supports your career growth with ongoing learning and training programs. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected status. Applicants with a disability who require a reasonable accommodation for any part of the application or hiring process can contact Human Resources at the location(s) where you are applying. We participate in the E-Verify program in certain locations as required by law. Summary Long Prairie Packing Company, LLC an American Foods Group Company is a privately held beef processing company located in Long Prairie, Minnesota. We appreciate our employees and reward them for a job well done. As a member of the team, you will find yourself challenged and contributing in a significant way to the success of the business, and you will be rewarded for that success. Check Out the Long Prairie, MN Area! Improve your quality of life by residing in Long Prairie, Minnesota, a rural city located in the center of Minnesota - A short drive from many of the best recreational areas in Minnesota, and not too far from the Twin Cities and the ever-famous Mall of America! Long Prairie's museums, scenic golf courses, and historic buildings will fulfill your diverse interests. The area also offers: Long Prairie Trails - 4 well-kept trails that extend throughout the entire city Lake Charlotte Beach which includes a swimming beach, fishing pier and boat launch, softball fields, and much more! Year-round community events that the whole family will love.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Identify and implement corrective actions to minimize downtime for manufacturing-related issues. Evaluate and order essential tools and fixtures to promote safety and efficiency for production team members. Implement Lean Manufacturing initiatives and participate in continuous improvement activities. Assist with new product launches and process development. Recommend product improvements and maintain standard drawings and work instructions. Support manufacturing of custom/standard product bills, routings, and supplemental data. Provide documentation for estimating the cost of materials and labor of manufactured products. Understand product complexity and equipment requirements to select appropriate manufacturing lines/processes. Work with multi-functional team members on capital planning and acquisition projects. You have: We're looking for a proven candidate who can bring a flawless execution to our ambitious projects. The ideal candidate will possess the following: High School diploma or G.E.D. or equivalent experience; a 2-year or 4-year degree is preferred. Minimum of 2 years of experience in a manufacturing environment. Strong analytical thinking abilities. Initiative to be a self-starter and work independently with minimal supervision. Flexibility in swiftly evolving business situations and the capacity to excel in a dynamic work setting. Proficiency, or the capacity to acquire, computer software such as Microsoft Office, JD Edwards, and SolidWorks. Ability to detail processes in work instruction format. Experience in Lean Manufacturing and Continuous Improvement projects. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $20.40 - $37.80 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Who We Are At Agiliti, we believe every interaction has the power to change a life. We are a nationwide company of passionate medical equipment management experts who proudly serve hospitals and healthcare facilities to ensure quality medical equipment is in the right place at the right time for effective patient care. We value our diversity and celebrate our differences, always seeking diverse backgrounds, ideas and experiences. Make an impact in healthcare and grow your career with Team Agiliti! The Biomedical Equipment Technician I conducts cost-effective maintenance on company and customer-owned medical equipment primarily located at customer sites, to ensure they are functioning properly and meet customers' needs. They perform operational verification, preventive maintenance, and corrective repair service. What is in It for You? * The opportunity to make a real impact on patients' lives. * Comprehensive Benefits Package. * Tuition Reimbursement. * Up to a 3% match on your 401K. * Make any day a pay day with Daily Pay. What You Will Do in This Role * Conduct cost-effective equipment inspection, maintenance, calibration, and repair service on various medical devices. * Complete all paperwork and computer data entry accurately and promptly to ensure complete documentation for billing and regulatory compliance. * Communicate with clinical staff on the topics of equipment features, functionality, etc. What You Will Need for This Role * An associate degree in electronics, mechanical engineering, or biomedical equipment technology. Alternative qualifications include Equivalent military training or Certified Biomedical Equipment Technician (CBET). * Basic computer skills; understanding of computer networks and equipment interaction. * Must hold a current, valid, and unrestricted driver's license. Must have a safe driving record based on Agiliti policies. * Willingness to work flexible hours, including evenings, weekends, and holidays, as well as emergency off-hours as needed to support a 24/7 schedule. * Willingness to travel periodically to support business needs. * The ability to lift, push and/or pull up to 75 pounds. * The ability to often bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit, stand and walk for extended periods of time. It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination. Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs. Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law. If you require assistance with your application, please contact ****************************. Primary Job Location: Bloomington District Additional Locations (if applicable): Job Title: Biomedical Technician I Company: Agiliti Location City: Bloomington Location State: Illinois

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

SMT Manufacturing Engineering Technician Bloomington, MN | Direct-Hire | $20-$30/hr + OT (Flexible) | 100% Onsite | 2nd shift We are seeking a hands-on, detail-oriented SMT Manufacturing Engineering Technician to support ongoing production, process improvement, and quality initiatives in a precision manufacturing environment. This role plays a key part in troubleshooting equipment, validating tooling setups, and supporting engineering with documentation, testing, and layout activities. It's an ideal opportunity for someone with strong technical aptitude and a collaborative mindset. POSITION RESPONSIBILITIES: Set up and troubleshoot SMT production equipment and fixtures, assisting with maintenance, test stands, and tooling validation to ensure uptime and consistency. Collaborate with manufacturing and engineering teams to execute equipment qualifications, process validations, and new tooling trials. Assist with drafting, revising, and releasing work instructions, quality documentation, and test procedures. Support fixture and equipment development by coordinating with vendors, ordering parts, and overseeing timely build and testing. Use precision measurement tools to conduct part layouts and dimensional verification, reporting results to engineering. Maintain tooling and gauge records, track equipment performance, and ensure calibration documentation is up to date. Contribute to root cause analysis and corrective action plans for process or product issues, participating in MRB and failure investigations. Support lean initiatives on the production floor by identifying improvement opportunities and collaborating on waste-reduction efforts. REQUIRED QUALIFICATIONS: Associate degree in Mechanical, Manufacturing, or related Engineering Technology field or equivalent experience. 3+ years of hands-on experience in a manufacturing environment. Proficiency with mechanical measurement tools (calipers, micrometers, height gauges, etc.). Experience supporting validation, process improvement, and test documentation. Ability to interpret engineering drawings and schematics. PREFERRED QUALIFICATIONS: Familiarity with 3D CAD systems such as SolidWorks or AutoCAD. Exposure to lean manufacturing tools or quality systems (ISO 9001, 8D, FMEA, etc.). Ability to work independently on test setups, equipment troubleshooting, and layout tasks. BENEFITS: Competitive salary with performance-based incentives PTO and paid holidays Medical, dental, and vision coverage 401(k) with company match Ongoing training and professional development opportunities Be the first to learn about future positions by joining our Newsletter and following us on LinkedIn! Konik is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other protected class status. Konik has been creating impactful relationships between technical talent and employers for more than 50 years. Konik has specialized in placing professional, qualified personnel in Minnesota and western Wisconsin businesses since its inception, and maintains a strong commitment to customer service.

Koozie Group If our name sounds familiar, there's a reason why. We're the people behind the iconic Koozie Can Kooler - and more! As one of the largest suppliers in the promotional products industry, you've probably seen our work everywhere from your local bank to a large concert or sporting event. We imprint company logos and slogans on everything from pens to coffee tumblers, lunch bags, tech accessories, camp chairs, and award-winning calendars, to name just a few. Our desire to benefit our people, customers, communities, and industry is behind all that we do. We call it Keep It. Give It., and it ensures that we are leaving a positive, lasting impact with the products and solutions we deliver. We're looking for the right person to fill this role. Read on if you want to know more and discover how we like to keep the good going ! Hours: Friday-Sunday: 5:00am - 5:00pm Pay Rate: $28.00 - $35.00/hr. (eligible for $3,000 sign-on bonus) Location: Red Wing, Minnesota Why join the Koozie Group team? People First culture Flexible Schedules Climate controlled environment (Clean and Heat/AC!) Great Benefits (Health, Dental, Vision, 401k with match, and more!) Paid Time Off (Vacation, Sick, Personal) Tuition Reimbursement Advancement Opportunities Employee Referral Bonus Program Annual Performance Reviews Job Description for Mechatronic Technician: The Mechatronic Technician maintains, troubleshoots, and repairs industrial equipment and machinery, with a focus on electrical, pneumatic, and robotic equipment. Diagnose and troubleshoot problems, dismantle/reassemble machines, replace defective parts, and makes necessary adjustments to ensure efficient operation. Most of the time spent will be addressing equipment repairs, assisting with complex changeovers, and completing PM's. This position requires a broad technical knowledge of electromechanical principles and good working knowledge of manufacturing machines and processes. Candidate must have a strong technical aptitude and analytical problem-solving skills. Job Responsibilities for Mechatronic Technician: Assemble, install, and maintain mechanical and electronic components and systems. Diagnose and troubleshoot issues in mechatronic systems and equipment. Perform routine maintenance and calibration of mechatronic machinery. Collaborate with engineers to design and improve mechatronic systems. Interpret technical drawings, schematics, and manuals to ensure accurate assembly and repair. Document and report on system performance, maintenance activities, and repairs. Conduct testing and validation of new systems and components. Ensure compliance with safety regulations and industry standards. Upgrade and modify existing systems for improved performance and efficiency. Provide technical support and training to other team members and clients. Maintain inventory of tools, parts, and supplies necessary for repairs and maintenance. Implement quality control measures to ensure the reliability of systems and components. Job Requirements for Mechatronic Technician: Associate degree in Mechatronics, Mechanical Engineering, or a related field. Minimum of 2 years of experience in a mechatronic or related technical role. Proficiency in reading and interpreting mechanical blueprints, electrical schematics, and technical drawings. Strong knowledge of PLC programming and troubleshooting. Experience with robotics, automation systems, and control systems. Familiarity with CAD software for design and modification tasks. Ability to use diagnostic tools and equipment for troubleshooting mechanical and electrical issues. Strong understanding of safety protocols and procedures in a manufacturing environment. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a multidisciplinary team. Strong communication skills for effective collaboration with engineers and other technicians. Willingness to work flexible hours, including overtime and weekends, if needed. Physical ability to lift heavy equipment and stand for extended periods. Valid driver's license and reliable transportation. Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do but because it makes our company stronger. If you share our values and our enthusiasm to keep the good going , you will find your way at Koozie Group. Koozie Group is proud to be an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, age, sex (including pregnancy, childbirth, or related medical conditions), gender, marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or expression (including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Koozie Group also prohibits harassment of applicants and employees based on any of these protected categories. In compliance with the Americans with Disabilities Act, Koozie Group will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

Koozie Group If our name sounds familiar, there's a reason why. We're the people behind the iconic Koozie Can Kooler - and more! As one of the largest suppliers in the promotional products industry, you've probably seen our work everywhere from your local bank to a large concert or sporting event. We imprint company logos and slogans on everything from pens to coffee tumblers, lunch bags, tech accessories, camp chairs, and award-winning calendars, to name just a few. Our desire to benefit our people, customers, communities, and industry is behind all that we do. We call it Keep It. Give It., and it ensures that we are leaving a positive, lasting impact with the products and solutions we deliver. We're looking for the right person to fill this role. Read on if you want to know more and discover how we like to keep the good going ! Hours: Friday-Sunday: 5:00am - 5:00pm Pay Rate: $28.00 - $35.00/hr. (eligible for $3,000 sign-on bonus) Location: Red Wing, Minnesota Why join the Koozie Group team? People First culture Flexible Schedules Climate controlled environment (Clean and Heat/AC!) Great Benefits (Health, Dental, Vision, 401k with match, and more!) Paid Time Off (Vacation, Sick, Personal) Tuition Reimbursement Advancement Opportunities Employee Referral Bonus Program Annual Performance Reviews Job Description for Mechatronic Technician: The Mechatronic Technician maintains, troubleshoots, and repairs industrial equipment and machinery, with a focus on electrical, pneumatic, and robotic equipment. Diagnose and troubleshoot problems, dismantle/reassemble machines, replace defective parts, and makes necessary adjustments to ensure efficient operation. Most of the time spent will be addressing equipment repairs, assisting with complex changeovers, and completing PM's. This position requires a broad technical knowledge of electromechanical principles and good working knowledge of manufacturing machines and processes. Candidate must have a strong technical aptitude and analytical problem-solving skills. Job Responsibilities for Mechatronic Technician: Assemble, install, and maintain mechanical and electronic components and systems. Diagnose and troubleshoot issues in mechatronic systems and equipment. Perform routine maintenance and calibration of mechatronic machinery. Collaborate with engineers to design and improve mechatronic systems. Interpret technical drawings, schematics, and manuals to ensure accurate assembly and repair. Document and report on system performance, maintenance activities, and repairs. Conduct testing and validation of new systems and components. Ensure compliance with safety regulations and industry standards. Upgrade and modify existing systems for improved performance and efficiency. Provide technical support and training to other team members and clients. Maintain inventory of tools, parts, and supplies necessary for repairs and maintenance. Implement quality control measures to ensure the reliability of systems and components. Job Requirements for Mechatronic Technician: Associate degree in Mechatronics, Mechanical Engineering, or a related field. Minimum of 2 years of experience in a mechatronic or related technical role. Proficiency in reading and interpreting mechanical blueprints, electrical schematics, and technical drawings. Strong knowledge of PLC programming and troubleshooting. Experience with robotics, automation systems, and control systems. Familiarity with CAD software for design and modification tasks. Ability to use diagnostic tools and equipment for troubleshooting mechanical and electrical issues. Strong understanding of safety protocols and procedures in a manufacturing environment. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a multidisciplinary team. Strong communication skills for effective collaboration with engineers and other technicians. Willingness to work flexible hours, including overtime and weekends, if needed. Physical ability to lift heavy equipment and stand for extended periods. Valid driver's license and reliable transportation. Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do but because it makes our company stronger. If you share our values and our enthusiasm to keep the good going , you will find your way at Koozie Group. Koozie Group is proud to be an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, age, sex (including pregnancy, childbirth, or related medical conditions), gender, marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or expression (including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Koozie Group also prohibits harassment of applicants and employees based on any of these protected categories. In compliance with the Americans with Disabilities Act, Koozie Group will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

Koozie GroupIf our name sounds familiar, there's a reason why. We're the people behind the iconic Koozie Can Kooler - and more! As one of the largest suppliers in the promotional products industry, you've probably seen our work everywhere from your local bank to a large concert or sporting event. We imprint company logos and slogans on everything from pens to coffee tumblers, lunch bags, tech accessories, camp chairs, and award-winning calendars, to name just a few. Our desire to benefit our people, customers, communities, and industry is behind all that we do. We call it Keep It. Give It., and it ensures that we are leaving a positive, lasting impact with the products and solutions we deliver. We're looking for the right person to fill this role. Read on if you want to know more and discover how we like to keep the good going ! Hours: Friday-Sunday: 5:00am - 5:00pm Pay Rate: $28.00 - $35.00/hr. (eligible for $3,000 sign-on bonus) Location: Red Wing, Minnesota Why join the Koozie Group team? People First culture Flexible Schedules Climate controlled environment (Clean and Heat/AC!) Great Benefits (Health, Dental, Vision, 401k with match, and more!) Paid Time Off (Vacation, Sick, Personal) Tuition Reimbursement Advancement Opportunities Employee Referral Bonus Program Annual Performance Reviews Job Description for Mechatronic Technician: The Mechatronic Technician maintains, troubleshoots, and repairs industrial equipment and machinery, with a focus on electrical, pneumatic, and robotic equipment. Diagnose and troubleshoot problems, dismantle/reassemble machines, replace defective parts, and makes necessary adjustments to ensure efficient operation. Most of the time spent will be addressing equipment repairs, assisting with complex changeovers, and completing PM's. This position requires a broad technical knowledge of electromechanical principles and good working knowledge of manufacturing machines and processes. Candidate must have a strong technical aptitude and analytical problem-solving skills. Job Responsibilities for Mechatronic Technician: Assemble, install, and maintain mechanical and electronic components and systems. Diagnose and troubleshoot issues in mechatronic systems and equipment. Perform routine maintenance and calibration of mechatronic machinery. Collaborate with engineers to design and improve mechatronic systems. Interpret technical drawings, schematics, and manuals to ensure accurate assembly and repair. Document and report on system performance, maintenance activities, and repairs. Conduct testing and validation of new systems and components. Ensure compliance with safety regulations and industry standards. Upgrade and modify existing systems for improved performance and efficiency. Provide technical support and training to other team members and clients. Maintain inventory of tools, parts, and supplies necessary for repairs and maintenance. Implement quality control measures to ensure the reliability of systems and components. Job Requirements for Mechatronic Technician: Associate degree in Mechatronics, Mechanical Engineering, or a related field. Minimum of 2 years of experience in a mechatronic or related technical role. Proficiency in reading and interpreting mechanical blueprints, electrical schematics, and technical drawings. Strong knowledge of PLC programming and troubleshooting. Experience with robotics, automation systems, and control systems. Familiarity with CAD software for design and modification tasks. Ability to use diagnostic tools and equipment for troubleshooting mechanical and electrical issues. Strong understanding of safety protocols and procedures in a manufacturing environment. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a multidisciplinary team. Strong communication skills for effective collaboration with engineers and other technicians. Willingness to work flexible hours, including overtime and weekends, if needed. Physical ability to lift heavy equipment and stand for extended periods. Valid driver's license and reliable transportation. Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do but because it makes our company stronger. If you share our values and our enthusiasm to keep the good going , you will find your way at Koozie Group. Koozie Group is proud to be an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, age, sex (including pregnancy, childbirth, or related medical conditions), gender, marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or expression (including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Koozie Group also prohibits harassment of applicants and employees based on any of these protected categories. In compliance with the Americans with Disabilities Act, Koozie Group will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

We are seeking a dedicated Manufacturing Engineering Technician to enhance our production processes. This role involves collaborating closely with Manufacturing Engineers and production teams to optimize manufacturing operations. Key responsibilities include troubleshooting equipment and process issues, maintaining equipment, and updating process documentation. The technician will also support engineers in project development by building or procuring test equipment and conducting tests, including process validations. Key Responsibilities: Develop and revise production documentation, such as travelers, routings, drawings, work and inspection instructions, and BOMs, ensuring the availability of accurate information for quality product assembly. Assist in improving manufacturing methods and procedures, including drafting change orders and deviations. Program production equipment effectively. Identify and resolve process, material, or equipment issues, offering solutions to minimize downtime. Design, assemble, procure, or modify tooling, fixtures, and equipment for efficient production methods. Schedule, perform, and document routine maintenance on manufacturing and testing equipment. Collaborate and communicate effectively with colleagues at various organizational levels. Contribute to team success by undertaking additional tasks as necessary. Qualifications and Skills: Associate Degree in Engineering Technology or a related field, or equivalent education and experience. Strong communication skills and the ability to work well both independently and within a team. Proficiency in computer software, including Microsoft Office Suite (Word, Excel, Outlook), SolidWorks or similar, and Altium or similar. Knowledge of electronics industry standards (IPC-A-610, J-STD-001, IPC-A-620) is preferred. Familiarity with lean methodology is advantageous. Hands-on problem-solving capabilities and a self-motivated, self-directed approach. Ability to pass a background check and drug screening. Physical Requirements: Ability to perform computer and desk work for extended periods. Capability to perform machine and production-related tasks, requiring good hand/finger dexterity and eyesight. Ability to lift and carry up to 25 pounds.