Engineering technician jobs in North Carolina - 1,606 jobs

Qualifications: Here's What You'll Need: • Associate's degree (AA) in Computer Aided Drafting and Design or similar technical degree • 15+ years of piping engineering or design experience, with at least 5 years in a lead or supervisory role. • Proven ability to manage scope, schedule, and budget for complex industrial projects. • Advanced knowledge of piping codes and standards (ASME, B31.3, BPE, etc.). • Software Expertise: Ideally, you can model in Revit or AutoCAD Plant 3D, but at a minimum, you must have proven history utilizing these tools with coordination of global teams. • Strong understanding of constructability, safety, and cost control principles. • Excellent communication and leadership skills to manage multi-discipline teams and client interactions. Ideally You Will Have: • Bachelor's degree in Mechanical Engineering or a related discipline. • Experience in pharmaceutical, biotech, or advanced manufacturing facilities. • Familiarity with pipe stress analysis and integration with design deliverables. • Demonstrated success in global workshare execution and remote team leadership. • Ability to mentor and develop junior engineers and designers, fostering technical growth. • Strong business acumen with an understanding of earned value management and change control processes. • Advanced proficiency in Revit and AutoCAD Plant 3D. Some past experience with Hexagon SmartPlant 3D. Responsibilities: What You'll Do: • Serve as the primary discipline lead for piping engineering and design, ensuring compliance with client's standards, procedures, and quality expectations. • Supervise all aspects of pipe design, including layout development, routing, and coordination with other disciplines. • Oversee project level piping material specifications, ensuring proper selection for process, utility, and specialty systems. • Maintain strong client relationships, understanding their expectations and promptly communicating scope or design changes. • Oversee project earned value, monitor progress, and manage change effectively. • Develop person-hour estimates, allocate resources, and determine staff effectiveness-who does what and when. • Oversee project level piping stress analysis activities, coordinating with stress engineers to ensure system integrity and compliance with applicable codes. • Drive successful global workshare execution through heightened communication and strategic coordination. • Be able to communicate definitive expertise around Piping and Facility Layout principles • Review vendor drawings, execute piping engineering design, and develop design estimates. • Keep construction costs and safety measures at the forefront of all decisions. • Mentor and guide team members, fostering growth and technical excellence. Comments/Special Instructions Position requires 40% of in-office at Cary location (2 of 5 days)

Performs a variety of quality and/or safety checks to ensure compliance with quality standards, reliability standards, and all specifications. Assists with troubleshooting and resolving quality issues through audits, sampling, inspection, and functional testing. Supports implementation of new quality processes. At Butterball, we exist to help people pass love on. As the most recognized name in turkey, the brand represents more than 60 years of cherished memories, providing quality, great tasting products that make meals something to celebrate every day. We proudly believe that life at Butterball means having a team who supports you, having the opportunity to grow personally and professionally, and making an impact on the health of others daily. Whether you choose to work at one of our five (5) manufacturing facilities in NC, AR, MO, farms in AR, NC, and KS, corporate office in NC, IL, or in the field, we believe we have an opportunity for everyone to succeed. At Butterball, we believe in fostering a culture where every team member is valued, has the opportunity to grow professionally and contribute to our success. Join us in our Purpose and apply for an opportunity today! Key Responsibilities Monitors processes to ensure compliance with food safety, regulatory and company compliance, including GMP, HACCP, and SOPs. Collects microbiological and product samples for testing and evaluation. Performs checks of product quality against specifications. Assists with audits of the process, GMP's, food safety, and customer audits. Investigates issues related to Quality and Food Safety. Records findings and assists with troubleshooting quality, safety, or sanitation issues. Applies holds to nonconforming products and materials. Assists with product improvement projects. Assists with data verification and quality metrics reporting. Minimum Qualifications (Educations & Experience) High school diploma, GED, or equivalent 1+ year of experience or the knowledge, skills, and abilities to succeed in the role Knowledge, Skills, and Abilities Butterball Core Competencies Caring about people, valuing contributions, and empowering to succeed is the Butterball Way. We recognize the value that different perspectives and cultures bring to Butterball and seek to create an environment where everyone can thrive. Everyone has a seat at the table and is expected to embody our core competencies: Safety First: We put safety first. The health, safety, and well-being of our people, products, and turkeys is everyone's responsibility and everyone's jobs. Integrity: We trust each other to do the right thing. We act with integrity and gain the confidence and trust of others through honesty, respect, and authenticity. Stewardship: We take care of what matters. We are accountable to our commitments and take responsibility for the well-being of our teams, our quality, our customers, our business, our brand, and our communities. We are always answerable for our actions and those we lead. Enthusiastic Attitudes: We create a climate where everyone feels they belong and can be engaged, every day. Where our people are enthusiastic and motivated to do their best and work together to make great things happen. Continuous Improvement: We are committed to continuous improvement. We challenge ourselves and our company to constantly learn, develop, grow, improve, and innovate. Essential Knowledge, Skills, and Abilities Knowledge of workplace safety rules Basic understanding of manufacturing processes Good math skills Ability to speak, read, and write in English Good communication and customer service skills with the ability to interact at all levels Excellent attention to detail Firm problem-solving, organization, time-management, and critical thinking skills Ability to understand and follow directions to ensure compliance with all applicable standards and regulations Preferred Knowledge, Skills, and Abilities Physical Demands While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, keyboard, and occasionally lift up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, color vision and the ability to adjust focus. Working Conditions & Travel Requirements Work will be performed in a variety of conditions. Occasionally in a climate-controlled office environment(s) and primarily in a manufacturing plant environment with varying conditions, such as cold areas, wet areas, warm areas, chemicals, and other site conditions. This position requires the individual to wear and work in personal protective equipment while in the manufacturing environment. The noise level of the office environment is usually moderate; the noise level in the manufacturing environment may exceed 85 DBA and require hearing protection. Occasional travel may be required. Disclaimer We embrace equal opportunity employment. Butterball is committed to the fair and impartial treatment of all employees and applicants for employment without regard to gender, age, race, religion, color, national origin, physical or mental disability, military/veteran status, sexual orientation, gender identity and expression, genetic information, marital status, parental status, pregnancy, or any other status protected by law. This position is deemed Safety Sensitive for purposes of Butterball's Drug/Alcohol Screening & Testing Policy. Details will be provided to individuals who receive a conditional job offer, or upon request. The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of what is required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminacio ́n (Spanish) *:** Airbus Aerosystems Kinston is looking for a *Manufacturing Engineering Technician* to join our team based in Kinston, NC. *Meet the Team: * Our team at Airbus Aerosystems Kinston manufactures crucial aircraft components. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. *Your Working Environment:* The Airbus Aerosystems Kinston facility sits at the forefront of aerospace manufacturing, specializing in the production of large, advanced composite aerostructures. Our team builds critical components for the state-of-the-art Airbus A350 XWB, including the composite center fuselage and wing spar. How We Care for You:* Financial Rewards: Competitive pay, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") Work/Life Balance: Paid time off including personal time, holidays and a paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical, prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path; as well as the opportunity to participate in accelerated development programmes; and both national and international mobility. Your Challenges:* Coordinates with engineering, manufacturing, and supply teams to develop, guide and implement manufacturing and tooling plans. Ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. Uses process engineering principles, established manufacturing principles, plans and techniques to define sequencing of manufacturing. Develops, establishes, and guides requirements for assembly, tooling simulations, manufacturing processes and configuration control. Communicates with manufacturing and engineering teams to influence and clarify engineering and facilities design concepts to increase manufacturability, improve production flow and optimize processes. Has the ability to demonstrate configuration control of the hardware, within the manufacturing build plan. Ability to apply knowledge in one or more of the following areas; Composite non- metallic, Electrical/Electronics, Machining, Sheet metal, Systems and Structures. Your Boarding Pass:* Associates/ Bachelor's degree from an engineering technology program with 1-5 years of relevant experience . Engineering Technology Accreditation Commission (ETAC) accreditation standard is required Ability to apply knowledge in one or more of the following areas; Structural Assembly planning Tool Planning Composite non-metallic Electrical/Electronics Machining Sheet metal Systems and/or Structures Preferred Qualifications* * SAP * Creating and maintaining manufacturing plans * CATIA V5 SAP Visual Enterprise (formerly Right Hemisphere) Lean Manufacturing, Root Cause Corrective Action and/or Six Sigma Tool Index Planning Understanding of the application of time standards Enovia V6 Enovia 3dexperience Six Sigma Project Management Automation Technology Liaison support Command Media Documentation Training Material Creation and execution Physical Requirements: * Vision: Daily able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: Daily able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Speaking: Daily able to speak in conversations and meetings, deliver information and participate in communications. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors):Rarely able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Carrying: Weekly able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: Weekly able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: Several times a month able to push and pull small office furniture and some equipment and tools. Sitting: Daily able to sit for long periods of time in meetings, working on the computer. Squatting / Kneeling: Daily able to squat or kneel to retrieve or replace items stored on low shelving. Standing: Daily able to stand for discussions in offices or on the production floor. Travel: Once or twice a year able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): Daily able to walk through office and production areas including uneven surfaces. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Administrative position only PPE required: Steel-toed shoes are required for all shop floor visits, appropriate hearing/eye protection may also be required when visiting the shop floor. Take your career to a new level and apply online now! A full job description will be provided to candidates who progress to the interview stage or any candidate upon request. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. ****Company:**** Airbus Aerosystems Kinston, Inc *Employment Type:* US - Direct Hire *Experience Level:* Professional *Remote Type:* On-site *Job Family:* Assembly & Integration ----- ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to .

Location: Greensboro, NC | Full-Time Who We Are We are a trusted leader in the electrical construction industry, known for nearly a century of craftsmanship, safety, and integrity. Headquartered in Greensboro, NC, we've built a reputation for delivering complex, high-quality electrical projects across the Southeast with precision, innovation, and teamwork. Our culture emphasizes collaboration, mentorship, and continuous learning, creating an environment where talented professionals grow their careers while taking pride in the work they do every day. Position Summary We're seeking a QA/QC Technician to support project quality and performance through on-site inspections, documentation, and team coordination. This position plays a critical role in maintaining the company's high standards of consistency, accuracy, and safety. The ideal candidate has hands-on experience in electrical construction, a keen eye for detail, and the ability to communicate effectively across teams and job sites. What You'll Do Conduct field inspections of underground systems, temporary power, switchgear, and equipment installations Review project scopes and QA/QC expectations during kickoff meetings Collaborate with field teams, general contractors, and project managers to ensure compliance with company and client standards Use the QuickBase QA/QC App to record inspections, document issues, and manage nonconformance reports Verify torque and megger testing results and closeout documentation accuracy Promote best practices and consistency across projects Support administrative and documentation tasks as needed Travel to job sites, including occasional out-of-town projects What We're Looking For 5+ years of experience in electrical construction (Foreman or Superintendent experience preferred) Strong knowledge of electrical systems, QA/QC standards, and installation practices Proficient in Microsoft Office Suite and the QuickBase QA/QC App Excellent communication, organization, and reporting skills Comfortable performing physical inspections in active construction environments Dedicated to safety, quality, and teamwork Why You'll Love Working Here A company built on integrity, safety, and technical excellence Collaborative, mentorship-driven culture with advancement opportunities Work on diverse, high-profile projects across multiple industries Competitive pay, benefits, and ongoing professional training If you're ready to join a respected team that values craftsmanship, accountability, and innovation - apply today and help us build what lasts.

Role: Maintenance Engineering Technician (PLC Programming) Industrial Maintenance experience in a manufacturing environment or equipment installation and debugging experience Experience with Electrical and/or mechanical systems in an industrial manufacturing environment Technical experience with PLCs in programming, including read, write and modify logic Technical experience with Servo Motion Controllers Technical experience with relay logic including wiring and troubleshooting Technical experience with Robotics including programming and troubleshooting. Experience with Hydraulic or Pneumatic troubleshooting and schematic reading Availability to work overtime, holidays, weekends, and shutdowns Ability for business travel, both domestic and international - up to 30%. Added bonus if you have: Technical associate degree or higher or equivalent experience Experience in Pre-Production set up Experience with Production Processes including Standardized Work (STW) and Job Instruction Sheets (JIS) Experience gathering and analyzing quality data from multiple sources New plant or facility startup experience Experience with high volume production in a clean room environment

Insight Global is seeking an IT Automation Engineer to support the delivery of highly automated warehouse and intralogistics projects. The role focuses on integrating advanced material handling systems (ASRS, conveyors, AGVs/AMRs) and complex IT/OT automation (SCADA, WCS, SAP) to enable seamless, automated supply chain flows. Key Responsibilities Test, commission, and debug PLC-driven warehouse automation integrated with SAP EWM or other WMS. Integrate automation systems with IT infrastructure, including Active Directory and cybersecurity. Program and debug PLCs (e.g., Siemens S7-1500). Work with commercial or custom WCS platforms (e.g., Dematic iQ, Honeywell Intelligrated, Swisslog SynQ). Ensure compliance with local and global standards. Develop interface agreements and align requirements with equipment vendors. Maintain and improve process control systems. Support audits and act as SME for process control systems. Coach and train colleagues in relevant areas. Implement effective change management and support process improvement initiatives. Qualifications Bachelor's degree in engineering or related field (or equivalent experience). 5+ years of engineering experience in process-based manufacturing, utilities, or packaging systems. Experience with warehouse automation equipment (ASRS, AGVs, AMRs, conveyors) preferred. Knowledge of SAP EWM, PLC, DCS/SCADA, MES, Oracle, MS SQL, and general controls. Strong project management and problem-solving skills. Ability to work onsite full-time; relocation and travel expenses are not reimbursed.

The role involves testing, troubleshooting, and repairing electrical equipment and systems, including circuits, relay logic, wiring, motors, servo drives, and various electronic components. The individual will support machine integration into production, ensure equipment safety, perform technical documentation, and participate in continuous improvement efforts. The position requires strong problem-solving skills and the ability to support engineering projects and production trials. Requirement/Must Have: Industrial maintenance experience in a manufacturing environment or experience with equipment installation and debugging. Experience with electrical and mechanical systems in an industrial setting. Technical experience with PLC programming, including reading, writing, and modifying logic. Technical experience with servo motion controllers. Technical experience with relay logic, wiring, and troubleshooting. Technical experience with robotics, including programming and troubleshooting. Experience with hydraulic or pneumatic troubleshooting and schematic reading. Availability to work overtime, holidays, weekends, and during shutdowns. Ability to travel domestically and internationally up to 30%. Experience: Experience in equipment testing, repair, and integration. Experience supporting machine production trials. Experience developing and maintaining schedules for assigned work areas or projects. Responsibilities: Test and repair electrical equipment and systems. Write, program, troubleshoot, modify, and repair PLCs, robotics, cameras, and other electronic systems. Troubleshoot and repair safety systems, hydraulic systems, pneumatic systems, and machine components. Plan and execute machine integration into mass production. Perform administrative documentation of work performed. Problem-solve and continuously improve safety, quality, and productivity. Develop detailed schedules for work areas or projects. Participate in engineering project planning. Support machine production trials at vendor sites. Certify equipment safety per applicable standards through safety integrity checks. Should Have: Ability to learn new processes quickly. Strong collaboration and communication skills. Skills: Strong technical and troubleshooting skills across electrical, mechanical, and electronic systems. Ability to read and interpret schematics. Strong organizational and documentation skills. Qualification And Education: Technical associate degree or higher preferred, or equivalent experience. Experience with production processes, including standardized work and job instruction sheets. Experience analyzing quality data from multiple sources. Experience with new plant or facility startup preferred. Experience in high-volume production environments is a plus.

We are seeking a skilled Automation Technician to join our team. This is a challenging and rewarding position that offers opportunities for growth and development. If you are a motivated individual with a passion for automation technology, we encourage you to apply for this position. Join our team and contribute to the success of our organization. SUMMARY: Support operations in the design, build, implementation, and maintenance of custom-built equipment and processes under the direction of the Manufacturing Engineer, mainly utilizing Automation Direct's PLC and software. Develop innovative and creative approaches for improvement in safety, quality, and productivity in processes and equipment. Occasional travel may be necessary. ESSENTIAL FUNCTIONS: Must be capable of following and meeting standard work requirements. Must be able to use computer programs to assist in recording data, making labels, obtaining prints and specifications, etc. Lead projects to improve equipment within the facility. Be able to continue to pursue future designs that will help Parker HPD move forward in leading-edge technology Troubleshoot equipment or PLC issues. Able to foster professionalism with all associates in order to obtain feedback and ideas to incorporate into improvements for the facility. Aide in the development of apprentices. DEPARTMENT SPECIFIC FUNCTIONS: Specify and order any materials required to create any approved project and document the final designs. This documentation must include items such as: blueprints, bill of materials, preventative maintenance standard work, etc. as required for continued support of the equipment Develop a spare parts stock strategy to organize and correctly account for that inventory and usage Develop safety practices that improve working conditions on equipment as needed and beyond OEM standards to ensure a safe Parker work environment in HPD plants Schedule equipment repairs or implementation with production control department. Other duties may be assigned at a later time Work safely in accordance with regulations, standards, and procedures in a manner that eliminates risk to health and the environment. Notify leadership of unsafe conditions or practices unlawful activities and activities that present unreasonable health and/or environmental risk. Report all safety and/or environmental incidents to leadership immediately. Participate in peer-based teams (i.e., Cross Functional Teams), and work with groups to initiate and implement programs such as Lean Manufacturing, 5S, and Total Productive Maintenance. QUALIFICATIONS: Education: High School diploma or GED Certified electrician preferred 2 years of trade school education preferred Desired 4 years of trade school education or certificate Experience: 5 years in a Manufacturing Environment Required Skills Good verbal and interpersonal communication skills Good math, reading and writing skills Proficient with Microsoft Office. Experience with Automation Direct's Productivity Suite Capable of wiring PLC and related components. Have working knowledge and understanding of pneumatic systems, hydraulic systems, and electrical equipment (systems up to 480 volts). Creative and out of the box thinker to visualize and construct equipment and/or make modifications that will improve safety and productivity for our processes and people. Preferred Skills 1. Experience with Codesys programming software. 2. Capable of writing training instructions, Standard Work instructions, and repair records. 3. Have working knowledge of the maintenance and functionality of various types of manufacturing equipment. 4. Have working knowledge and understanding of pneumatic systems, hydraulic systems, electrical equipment (systems up to 480 volts). 5. Strong programming knowledge in PLC's and HMI's. ORGANIZATIONAL RELATIONSHIPS/ SCOPE: Report directly to Manufacturing Engineer Work closely with other departments to resolve issues with the processes & equipment. Communicate with incoming shift of issues and needs. WORKING CONDITIONS: Work in areas where safety equipment will be required (steel toe shoes, eye protection, hearing protection) Standing is required for extended periods of time. Walking, pushing, pulling, reaching, bending, turning, twisting, squatting, and lifting is performed regularly Air-conditioned facility The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position. EQUAL EMPLOYMENT OPPORTUNITY: Parker is an Equal Opportunity and Affirmative Action Employer, committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency, or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. DRUG-FREE WORKPLACE: In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

Job Title: Facilities Technician Company: AISIN North Carolina Department: Facilities The Facilities Technician is responsible for providing electrical and mechanical support to the plant facilities. This role troubleshoots and maintains industrial manufacturing facilities equipment as well as the outdoor grounds of the facility. Position Responsibilities The incumbent is expected to perform the following functions that the company has determined are essential to this position: Handle industrial electrical issues including changing light bulbs and working with 208, 277, 480-volt, 3 phase and 120-volt, single phase equipment. Install, repair, and troubleshoot industrial piping systems along with the ability to change out pumps and motors. Troubleshoot to determine malfunctions on equipment using knowledge of microprocessors, programmable controllers, and circuit analysis. Troubleshoot AC & DC Systems up to 480 volts. Record maintenance and repairs activities in a computer-based maintenance management system, fill out utility check sheets and other required check sheets. Run Wastewater treatment system. Check operating status of air compressors. Execute plumbing repairs such as clearing clogged fixtures, drains, and adjusting leaks. Clean out clogged pumps in the sump pumps system as well as troubleshoot and adjust level controls in the system. Repair manual and automatic doors, hinges, locks, and closers on personal doors. Make repairs to dock equipment and the well system. Review equipment check sheets for abnormal readings. Lead Team Members in light fixture replacement. Ensure that restrooms are in good working order. Identify and repair building issues. Assist in making safety related kaizens and repairs. Plan and implement Kaizens. Required Skills and Abilities Essential Skills and Experience: 2 or more years of experience in industrial maintenance. Knowledge of electrical equipment - 480/230v 3ph, 110&24 vdc controls, prints and schematics. Knowledge of hydraulics and pneumatics. Knowledge of Plant Fire Sprinkler Systems. Ability to reset faults in the following systems and equipment: ATF Supply System, Crane Systems, Fluid Coolers, Air Compressors. Ability to safely operate industrial moving equipment such as a scissor lift, forklift, and other equipment. Ability to troubleshoot and correct faults on Wastewater System. Electrical skills. Mechanical - general knowledge of machines, tools, measurement instruments, automation/robotics, maintenance, and repair. Repairing - repairing machines or systems using the necessary tools. Equipment Maintenance - performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Equipment Selection - determining the kind of tools and equipment needed to do a job. Math Skills - basic knowledge of mathematics. Education/Training/Certifications Associate degree in Electrical or Industrial Maintenance preferred. Travel Requirements Approximately 0 % Must be willing and available to travel to such locations and with such frequency as is necessary and desirable to meet business needs. Work Environment Requirements With reasonable accommodation: Must be able to operate a personal computer, telephone, and other office equipment. Must perform job duties onsite, when necessary, except those duties that are customarily or by their nature performed offsite (for example, offsite customer visits). Must be able to work effectively in a fast-paced environment. Must be able to work on multiple assignments at once, and complete assignments within deadline and budget (if applicable) with satisfactory quality. Must be able to operate as an effective team member. Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all company safety policies. Attendance/Work Hour Requirements Must maintain an acceptable attendance record. Must be willing and available to work weekends and holidays as necessary and desirable to meet business needs.

Perform bench testing, acceptance testing, and verification on advanced power electronic systems. Troubleshoot and repair board-level and system-level electronic assemblies using expert diagnostic techniques. Develop and update test procedures, work instructions, and documentation aligned with ISO9001, AS9100, and IPC requirements. Build, maintain, and improve test fixtures, jigs, and setups to support reliability and throughput. Ensure proper calibration, readiness, and safe use of all test equipment. Accurately document test results, corrective actions, and repair activities. Mentor, coach, and support junior technicians, elevating team skill level and capability. Partner with Engineering & Manufacturing on root-cause analysis, continuous improvement, and product feedback. Maintain a clean, safe, organized, and quality-focused work environment. Responsibilities Conduct bench testing, acceptance testing, and verification on advanced power electronic systems. Troubleshoot and repair board-level and system-level electronic assemblies using diagnostic techniques. Develop and update test procedures, work instructions, and documentation in line with ISO9001, AS9100, and IPC requirements. Build, maintain, and improve test fixtures, jigs, and setups to support reliability and throughput. Ensure proper calibration, readiness, and safe use of all test equipment. Document test results, corrective actions, and repair activities accurately. Mentor and coach junior technicians, enhancing team skill level and capability. Collaborate with Engineering & Manufacturing on root-cause analysis, continuous improvement, and product feedback. Maintain a clean, safe, organized, and quality-focused work environment. Essential Skills Proficiency with lab and bench equipment such as oscilloscopes, multimeters, power supplies, and electronic loads. Advanced understanding of electronic components, circuitry, and schematic interpretation. Experience troubleshooting and repairing complex electronics at both the component and system level. Familiarity with IPC standards and structured quality environments. Experience with ISO9001/AS9100 quality systems or test-fixture development. Additional Skills & Qualifications AA/AS degree in Electronics or related field, or equivalent professional experience. 4-year technical degree or 5+ years of experience in power electronics testing and repair. Experience in high-reliability sectors such as defense, aerospace, industrial, or medical. Leadership development and mentoring skills. Work Environment The position involves hands-on work in a lab environment within a small company that offers a family-like atmosphere. The role provides opportunities to grow and mentor team members while working on highly technical, mission-critical power systems. The company culture is supportive, and the location offers a low cost of living. There is a career pathway toward roles such as Lead Technician, Test Engineering, or Manufacturing Engineering support Job Type & Location This is a Contract position based out of Murphy, NC. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Murphy,NC. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Title: QC Environmental Monitoring Technician Department: Quality Control Pay: $25-$30/hr The QC Environmental Monitoring Technician supports parenteral manufacturing operations by performing routine environmental monitoring of classified manufacturing areas and conducting clean utility sampling and analysis across manufacturing and QC laboratory facilities. This role is essential in ensuring compliance with cGMP requirements and maintaining a controlled manufacturing environment to support the production of safe, high-quality pharmaceutical products. Key Responsibilities Adhere to and promote compliance with cGMP regulations, Quality Systems, and Good Documentation Practices (GDP). Perform routine environmental monitoring of classified manufacturing areas in support of both routine operations and Environmental Monitoring Performance Qualification (EMPQ) activities. Conduct clean utility sampling and analysis, including: Compressed air Potable water Purified water Water for Injection (WFI) Clean steam Support manufacturing and QC laboratory operations by providing accurate and timely environmental monitoring data. Enumerate, review, and document environmental monitoring results using LIMS or other laboratory data systems. Perform Second Person Verification (SPV) of environmental monitoring data on a routine basis. Participate in continuous improvement initiatives and quality-focused projects. Assist in the development, revision, and maintenance of SOPs and Work Instructions as needed. Adhere to and promote compliance with all site safety policies and procedures. Minimum Qualifications High School Diploma or equivalent required; Associate degree preferred. Minimum of 2 years of experience performing Environmental Monitoring in a GMP-regulated pharmaceutical manufacturing environment. Prior experience supporting aseptic or parenteral manufacturing operations strongly preferred. Hands-on experience with environmental monitoring techniques, including: Viable surface monitoring Viable air monitoring Non-viable air monitoring Compressed air sampling Water and clean utility sampling and analysis Experience working with laboratory systems such as LIMS, LES, and/or MODA. Preferred Qualifications Strong understanding of cGMP regulations and regulatory compliance expectations. Experience performing environmental monitoring within filling isolators or Restricted Access Barrier Systems (RABS). Ability to train and mentor junior Environmental Monitoring Technicians. Strong written and verbal communication skills. Proven ability to collaborate effectively in a cross-functional team environment. Physical & Work Environment Requirements Ability to work in laboratory and cleanroom environments while wearing appropriate PPE. Ability to gown into facility-specific cleanroom attire. Ability to stand or walk for extended periods and perform repetitive tasks. Ability to lift, push, pull, and carry up to 30 pounds. Work Schedule & Travel Ability to work 12-hour shifts. Flexibility to work day or night shifts, particularly during training and startup phases. This role may initially support project/startup activities and transition into a routine operational support position.

Morrisville, NC Responsibilities: Able to Understand, Retain, and effectively apply On the Job training instruction Consistently follow processes and procedures to operate compliantly within a controlled environmental manufacturing space Read and Understand Assembly drawing and assembly instructions to correctly and efficiently assemble products Distinguish differences in sub-component parts based on part number and visual inspection Perform in-process inspections per applicable specifications or work orders, including inspection of input and output materials, packaging integrity Performs labeling and packaging activities Consistently adhere to assembly methodology of accept / reject criterion Interact with Quality Assurance personnel to ensure product quality and address any non-conformity detected Report problems with quality, processes, equipment, or materials to the Team Lead and or Supervisor Utilize approved tools and fixtures as required in a safe and efficient way Complete line clearance, scrap records, training records, and other documentation as required Maintain batch records for traceability purposes in accordance with company documented standards Maintain a clean and organized work area to facilitate manufacturing functions Other duties as assigned by the Supervisor and or Team Lead Essential Functions Ability to read and comprehend procedures written in English Ability to complete paperwork accurately in English Ability to work safely around chemicals and equipment Ability to stand or sit for long periods of time Ability to do repetitive work, requiring strong dexterity and hand/eye coordination Ability to lift up to 40 lbs Desired Education & Experience: High school diploma or equivalent Previous Work experience within a controlled environmental space preferred Previous assembly experience preferred Ability to lift up to 40 lbs Work Environment: • Work is normally performed in a climate-controlled office environment and throughout a heated manufacturing and warehouse facility • The noise level in the work environment is usually low to moderate

We are seeking a Controls Technician to provide 2nd-level technical support for PLC-based controls systems in support of new production line installations within a manufacturing environment. Key Responsibilities Troubleshoot and support PLCs, HMIs, drives, and safety systems (Allen-Bradley / Rockwell preferred) Support controls hardware, panel wiring, and system integration Participate in all project phases including design support, fabrication, off-line testing, installation, start-up, and training Provide production start-up support and assist with technology transfer to plant personnel Contribute ideas to enhance manufacturing capability and reliability Qualifications 4+ years of experience with PLCs, HMIs, drives, and safety systems Experience in a manufacturing environment Strong troubleshooting, structured programming, and communication skills Ability to execute assignments independently in a team-based environment AAS degree preferred or equivalent experience

Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2021, Eurofins generated total revenues of EUR 6.72 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description Metrologist responsibilities include, but are not limited to, the following: Conducting PQ/PM activities on chromatography systems Mapping temperature and humidity on refrigerators, freezer and stability chambers as needed. Managing assets in the Blue Mountain RAM platform Writing and revising technical reports Writing and revising SOPs and work instructions. Knowledge of ISO/IEC 17025, GLP and cGMP Qualifications The ideal candidate would possess: Strong computer skills; excellent proficiency in Microsoft Office, Word, Excel, PowerPoint, SharePoint Strong Technical and Mechanical skills. Strong team player Strong writing skills Ability to work independently and maintain self-motivation Detail oriented Strong scientific background Strong organizational skills Strong communication skills in person. High level of professionalism; professional appearance as a client-interfacing ambassador of the company Strong customer-service orientation Basic Minimum Qualifications: Bachelor's degree in a scientific field or commensurate experience. Additional Information The position is full-time, Monday through Friday, 8 a.m. to 5 p.m., with overtime as needed. Candidates currently living within a commutable distance of Winston-Salem, North Carolina, are encouraged to apply. Ability to work overtime as required. Tasks require repetitive motion and standing for long periods of time. May be required to respond to off-shift operational issues. Excellent full-time benefits, including comprehensive medical coverage, dental, and vision options Life and disability insurance 401(k) with company match Paid vacation and holidays #LI-EB1 Authorization to work in the United States indefinitely without restriction or sponsorship Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.

Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2021, Eurofins generated total revenues of EUR 6.72 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description Metrologist responsibilities include, but are not limited to, the following: Conducting PQ/PM activities on chromatography systems Mapping temperature and humidity on refrigerators, freezer and stability chambers as needed. Managing assets in the Blue Mountain RAM platform Writing and revising technical reports Writing and revising SOPs and work instructions. Knowledge of ISO/IEC 17025, GLP and cGMP Qualifications The ideal candidate would possess: Strong computer skills; excellent proficiency in Microsoft Office, Word, Excel, PowerPoint, SharePoint Strong Technical and Mechanical skills. Strong team player Strong writing skills Ability to work independently and maintain self-motivation Detail oriented Strong scientific background Strong organizational skills Strong communication skills in person. High level of professionalism; professional appearance as a client-interfacing ambassador of the company Strong customer-service orientation Basic Minimum Qualifications: Bachelor's degree in a scientific field or commensurate experience. Additional Information The position is full-time, Monday through Friday, 8 a.m. to 5 p.m., with overtime as needed. Candidates currently living within a commutable distance of Winston-Salem, North Carolina, are encouraged to apply. Ability to work overtime as required. Tasks require repetitive motion and standing for long periods of time. May be required to respond to off-shift operational issues. Excellent full-time benefits, including comprehensive medical coverage, dental, and vision options Life and disability insurance 401(k) with company match Paid vacation and holidays #LI-EB1 Authorization to work in the United States indefinitely without restriction or sponsorship Eurofins USA PSS Insourcing Solutions is a Disabled and Veteran Equal Employment Opportunity employer.

We are seeking a skilled and motivated Mechatronics Technician to support the production of HV and Pad-mount Distribution Transformers in a highly automated manufacturing environment. This role is critical to ensuring uptime and performance of advanced electromechanical systems, including robotics, CNC machinery, and automated assembly lines. You will collaborate closely with engineering, quality, and production teams to perform preventive maintenance, system diagnostics, and real-time troubleshooting, ensuring safety, quality, and throughput targets are consistently met. Key Responsibilities: Operate, monitor, and adjust automated machinery, robotic arms, and CNC equipment used in transformer manufacturing and testing. Conduct preventive and predictive maintenance on electromechanical systems to reduce unplanned downtime. Diagnose and troubleshoot mechanical, electrical, pneumatic, and control system faults using schematics, PLCs, and HMIs. Perform inspections and calibrations to maintain quality and performance standards. Interpret technical documents including electrical schematics, mechanical drawings, and control system logic. Collaborate with engineering, production, and quality assurance teams to support process improvements and product integrity. Maintain accurate logs of maintenance activities, machine performance, and production outputs using digital systems or CMMS. Actively follow all OSHA, NFPA-70E, and company safety standards. Participate in continuous improvement initiatives, including TPM, Lean, or Six Sigma projects as assigned. Qualifications: Education / Training Required: Certificate or Associate Degree in Mechatronics, Electromechanical Technology, Industrial Maintenance, or related field. Preferred: Advanced coursework in PLC programming, robotics, or control systems. Technical Skills Proficiency with PLCs (Allen-Bradley, Siemens), sensors, actuators, and industrial robotics. Ability to read and interpret electrical schematics, mechanical blueprints, and P&IDs. Familiarity with HMI interfaces, motion control systems, and basic ladder logic. Basic understanding of CNC programming, servo systems, and networked machine communication is a plus. Experience Preferred: 1-3 years in an advanced manufacturing, automation, or electromechanical maintenance environment. Experience in transformer, power systems, or high-voltage component manufacturing is a strong asset. Physical & Work Environment Requirements Ability to stand, walk, bend, and lift up to 50 lbs for extended periods. Work may involve exposure to noise, moving mechanical parts, and occasional hot/cold environments. Must wear PPE and follow all safety protocols in industrial environments. What We Offer: Competitive pay aligned with market benchmarks for Mechatronics Technicians in North Carolina. Comprehensive benefits: medical, dental, vision, 401(k) with match, paid time off. Ongoing training in automation systems, robotics, and process improvement. Opportunity for growth into Senior Technician, Automation Specialist, or Maintenance Leadership roles.

Job DescriptionJob Title: Electromechanical Technician- Up to $36.16/hour! Follow procedures to perform required PM programs and general maintenance tasks including electrical, mechanical, pneumatic and hydraulic repairs Read and interpret electrical, mechanical, pneumatic and hydraulic schematics for troubleshooting and repair of all plant equipment Use and troubleshoot variable speed AC and DC drive controllers. Understand servo motion controls, incremental and absolute position encoders and resolvers Analyze and repair PLC controlled equipment using the appropriate techniques and peripheral equipment Conduct root cause failure analysis and use problem solving techniques to ensure effective repairs on equipment Work to continuously improve the machines and the standardized procedures used to maintain them. Core Skills and Qualifications: High school diploma or equivalent required. Minimum two years' experience as an Electromechanical Technician. Strong electrical and mechanical troubleshooting experience required. Technical/vocational training and/or associate's degree preferred. Previous PLC experience with a working knowledge of Allen Bradley and/or Siemens PLCs. Must be a team player, have great communication skills and be flexible to accomplish the necessary tasks. Demonstrated ability to maintain accurate records, logs and files in a timely manner. About Spark Packaging: Spark Packaging is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize successful placement and retention, we start by listening to and understanding each of our clients. We believe in face-to-face interaction and having a solid understanding of our client's business before placement. We pride ourselves in team development as it matches our purpose as an organization to continually create career opportunities.

Job Status/Type: Full time Level I Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Responsible for inspecting, installing, troubleshooting, and repairing electrical components, alarm systems, light systems, building electrical systems, and sound systems Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Electronics Technicians install and maintain telephone systems, radio communication systems, communications lines, including the ride PA systems and speakers and wiring for park area sound, various digital and microprocessor controlled devices, video surveillance systems, and electronic shooting galleries, if any; repair, overhaul, troubleshoot, modify, fabricate, and test various types of electronic equipment and related devices, such as animatronic controls and park lighting systems; troubleshoot those systems and all electronic wiring circuits; take test readings; and use tools and common test instruments in the course of those tasks. Adheres to and enforces all Carowinds and specific Park policies and procedures, including safety, attendance and EEO policies, and demonstrates commitment to customer service in all aspects of employment Qualifications: Knowledge, Skills & Abilities: Basic knowledge of electronics installation and maintenance, including sound system installation and setup, lighting hanging, cable dressing, and animatronic controls Education: High School Diploma or GED License or Certification: Electronics Technician Certification Experience: Less than 1 year of experience. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Qualifications: Here's What You'll Need: • Associate's degree in Design Technology or related discipline (or equivalent experience). • 5+ years of piping design experience in industrial or commercial facilities. • Proficiency in AutoCAD Plant 3D or Revit for piping design and modeling. • Solid understanding of piping design basics and familiarity with equipment layout. • Ability to interpret piping specifications and apply them to design. • Strong organizational skills and attention to detail. • Effective communication skills for coordination with multi-discipline teams. Ideally You Will Have: • Bachelor's degree in Mechanical Engineering or related discipline. • Experience in pharmaceutical, biotech, or advanced manufacturing facilities. • Familiarity with pipe stress considerations and integration with design. • Ability to assist in specification management and QA/QC workflows. • In addition to AutoCAD Plant 3D or Revit, Hexagon SmartPlant 3D experience. • Exposure to global workshare execution and collaborative design environments. Responsibilities: What You'll Do: • Develop piping layouts and routing using AutoCAD Plant 3D or Revit. • Apply piping design fundamentals, including pipe sizing, routing, and coordination with other disciplines. • Assist with facility equipment layout to ensure efficient and safe designs. • Review vendor drawings and incorporate equipment data into piping models. • Understand project scope and identify potential changes that impact design hours or deliverables. • Support development of person-hour estimates for assigned tasks. • Collaborate with global teams to ensure successful workshare execution. • Maintain compliance with client's standards, procedures, and quality expectations. Comments/Special Instructions Position requires 40% of in-office at Cary location (2 of 5 days)