Engineering technician jobs in Pittsburgh, PA

Job Title : Quality Control Technician Pay Rate : $22.25/HR On W2 Shift : 9:00 pm (3rd shift) Responsibilities: Rest raw material and finished good properties of samples that come into QC Lab. Responsible for property testing that is reported to production and to the customer. Sample testing, i.e. viscosity, pH and density and determining adjustments Communicate adjustments and results to other departments Reduction of batch samples for spray-outs Hand spray panels for defect analysis Low-level analytical testing of intermediates Requirements: High school diploma/GED Quality Control experience with chemical or coatings manufacturing environment desired Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Kopp Glass, a Pittsburgh-based manufacturer of high-performance, custom glass products, is seeking to hire a Robotics Technician/Engineer responsible for developing, implementing, and managing process parameters and resources for automated, robotic glass manufacturing technologies. This person takes a hands-on approach to equipment operation, adhering to key aspects of the Quality Management System (QMS) related to process improvement, product documentation, corrective action, and preventative action procedures while leading daily work order execution to fulfill customer orders. The role will support and perform critical preparatory and operational processes including activities associated with glass melting, forming, and analysis, blending the technical aspects with hands-on responsibilities. This is a fully onsite position that will be responsible for performing job functions in Rostraver Township (15012). Primary Responsibilities: Coordinates, executes, and optimizes the operation of production work cells including tooling, robotics, and forming, through implementation of engineering best practices in preparation to and during production. Leads and performs setup of equipment, operation of robotic and automated equipment, and evaluation of results from glass manufacturing work cells. Works with the engineering team to accomplish the daily work plan, which could involve equipment maintenance, programming, repairs in a variety of robotic areas, inventory, equipment cleaning, forklift use, manufacturing, and other tasks as assigned. Analyzes and resolves product related issues and sets up methods of prevention for future occurrences (root cause analysis and corrective action) through application of rigorous mechanical, glass science and engineering principles when executing the NCR/Corrective Action processes. Develops part and process specific documentation for the integration of products into new or existing manufacturing processes while supporting the industrialization of small-scale processes into commercially viable large-scale operations. Minimum Qualifications: Associate's degree in robotics, electrical, mechanical engineering and/or engineering technology or related field. Bachelor's degree preferred. Up to 5 years of manufacturing or robotics experience; Various positions available dependent on experience. Proficient Microsoft Office skills including, Word, Excel, and PowerPoint. Proficient verbal and written communication skills. Access to our facility (and therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens and permanent residents of the United States. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.

Mechatronics Technician Trainee - $1,500 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: Bonus payments every 6 months Rich health plans Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you're mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. Position Summary The Mechatronics Technician Trainee is an entry-level production position where successful candidates will participate in the Core Mechatronics Career Development Program. This (fully paid) on-the-job training program will align your skills with a career path customized to your strengths and interests. Participants will work within the Core Mechatronics Production department. For highly motivated individuals with a strong desire to learn, this is an excellent opportunity to launch or transition into a hands-on technical career. What will your day look like? At Aerotech, you will Participate in a structured training program intended to provide the skills necessary to become an expert in the precision manufacturing industry under the guidance of experienced training and leadership staff. Integrate theory with practical hands-on skills through written training material and direct coaching from leadership. Read wiring and assembly drawings to determine product requirements Master industry required skills such as precision measurement, alignments, and advanced troubleshooting. Assemble and test complex, high precision mechanical and electrical components using a variety of testing, measurement equipment and software Assemble/Wire/Test precision motion systems. Operate additive manufacturing (3D printing) equipment in the production of Aerotech parts. Attend and actively contribute to bi-weekly progress meetings to engage in feedback exchange with training personnel. Successful completion of the training program will qualify you to pursue more advanced roles throughout the organization. What will separate you from the rest? Experience with Strong mechanical and/or electrical aptitude Strong drive to continually advance your career Experience with hand tools such as wrenches, hex keys, torque wrenches, screwdrivers, flat stones and pliers Ability to read and interpret assembly drawings and schematics Effective computer literacy and use of software, such as an ERP system Troubleshooting and problem solving skills Participation in a technical education program preferred, but not required Minimum Qualifications Must have a High School Diploma or GED Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! Competitive compensation Bi-annual bonus Annual raise eligibility UPMC Health Insurance Dental insurance Vision insurance Life insurance Retirement Plan Employee Stock Ownership Trust 401k Paid time off Parental leave Monday to Friday standard schedule Optional overtime - including Saturdays Referral program Professional development assistance Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company.

Firm Description: Sheffler & Company, Inc. (Sheffler/SCI) is a growing Civil Engineering & Surveying Consulting firm with offices in Pennsylvania and Ohio. The Sheffler headquarters is located 12 miles north of the City of Pittsburgh. Gary A. Sheffler, Sr., PLS founded our company in 1970 and is still active in the company today. Gary's son, Gary A. Sheffler, Jr., PE/PLS, is the Principal in Charge of Engineering & Surveying Services while his wife, Cristina Sheffler, serves as company President. The company is certified as a Women's Business Enterprise. Sheffler has extensive expertise in providing professional civil engineering and surveying services, focusing on private land development projects. Ourstaff of professionals possesses expertise in the areas of land development, site layout, grading, stormwater management, hydrology and hydraulics, soil erosion and sedimentation control, and surveying. SCI is technically oriented with over 95% of the work completed by our office in digital format. We have access to a variety of computer software programs which assist us in providing our engineering & surveying consulting services. Our staff consists of registered professional engineers and surveyors who strive to provide quality engineering and an unmatched level of personal service to every project. SCI utilizes partnering firms to provide Traffic Engineering, Geotechnical Engineering, and Aquatic Resource Investigation services. Position Requirements: Qualified candidates shall possess the following: 1-5+ years of experience in preparation of civil/site development & construction plans for residential and commercial projects utilizing Autodesk Civil 3D, v. 2016 or higher Extensive technical working knowledge of Autodesk Civil 3D relative to templates & standards, 3D surface modeling, earthwork analysis, street profile & corridor design, sewer pipe networks, etc. Excellent word processing and reading comprehension skills Ability to work independently and unsupervised Additional responsibilities include but are not limited to the following: Work as part of a team environment Ensure work is executed on time and in accordance with manager and client requirements while adhering to all company policies/procedures Project a positive attitude Possess excellent oral and written communication skills Communicate effectively and positively with all clientele and coworkers • Additional duties as required Position Benefits: Company Paid Medical, Dental, Vision, Life and AD&D Insurance 401K with company contribution Profit sharing & performance bonuses Paid holidays Paid time off Company paid certification renewals if applicable Company supports a great work/home life balance Casual, results-driven company culture Opportunities for advancement Hourly rate commensurate with qualifications and experience, plus overtime Referral Program Salary/Wage: Rate commensurate with qualifications and experience $27.50 - $40.00 per hour + overtime Compensation: $27.50 - $40.00 per hour ABOUT For over 45 years, Sheffler & Company, Inc.'s staff of Professional Engineers, Surveyors and Land Planners have served the Tri-State area. In 1970, Gary A. Sheffler Sr., PLS founded Sheffler & Company, Inc. - a small, family owned Land Surveying company. Shortly after, Sheffler & Company, Inc., expanded to include Civil Engineering and Land Planning. The company was lead for many years by Gary A. Sheffler, Sr. and his wife, Dorothea. Over these years, they became recognized as a local authority in Surveying and Civil Engineering by lending institutions, municipal authorities and private real estate developers. In 1990, Gary “Bud” A. Sheffler, Jr. and his wife, Cristina L. Sheffler, joined the family business to contribute to their growth and success. Today, Sheffler & Company, Inc. continues to operate as a strong, family owned business under the leadership of President, Cristina L. Sheffler and Principal Engineer & Surveyor, Gary A. Sheffler, Jr., P.E., PLS.

Basic Qualifications Candidates should demonstrate a thorough understanding of engineering technology. Engineering Interns must be enrolled in an accredited degree program in Computer Engineering, Systems Engineering, Software Engineering, Electrical Engineering, Mechanical Engineering or other related scientific or technical discipline with a preference for a standing of a sophomore or higher. Due to the nature of work performed within our facilities, U.S. citizenship is required. Responsibilities for this Position As a Test Engineering Intern for Space, Cyber and Intelligence Systems (SC&I), you'll be a member of a cross functional team responsible for building software and platforms that support our customer's most important missions in the Space and Intelligence domains. REPRESENTATIVE DUTIES AND TASKS: Apply your classroom-learned skills to a program supporting the defense of our country. GDMS has an immediate opening for a Test Engineering Intern to join our team. The position provides an opportunity to work on projects that support some of our nation's fundamental defense services. GDMS employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. The selected candidate will work with collaborative teams on various technical projects associated with our core mission. In addition to receiving a competitive wage, the Engineering Intern will enhance their skill set by working among a talented and technically accomplished group of colleagues. Interns will also enjoy a flexible work environment where contributions are recognized and rewarded. We encourage you to apply if you have any of these preferred skills or experiences: Design, build, test, deploy, and improve software services and platforms within a cross-functional agile team Ensure software quality is built in early and is testable Develop and participate in the QA/test approach, methodology, and process Implement, execute and troubleshoot automated tests Test applications through automated and manual back-end functions as well as through UIs Research, learn, communicate, and apply new technologies/tools to solve unique customer domain challenges What sets you apart: Check out who we are and what we do here. In this role, you will be responsible for the testing of software and systems products in a UNIX, Linux and/or Windows-based workstation environment. This role will offer you the opportunity to: Integrate as a member of a test team and complete assigned tasks, that will nurture and expand your technical skills Learn systems in order to update information Populate repositories with targeted data Research and document various data processes Abide by all security and safety procedures outlined by the company TECHNICAL SKILLS: Knowledge of test methodologies, writing test plans, creating test cases and debugging Test Automation using Playwright, Pytest, Selenium, Test Complete, Cucumber, Apache JMeter or similar tools Languages: Java, JavaScript/TypeScript, Python, HTML, CSS, Ansible Frameworks: Spring Boot, React/Redux Tools: Gradle, NodeJS, RHOSP/AWS/Azure Comfortable working with IDEs (VSCode, IntelliJ, etc.) Experienced with various Server Frameworks, DOM, and Java Web App Platform (Tomcat) Adept with Microsoft Office - especially Excel, Power-Point, and Word Comfortable working with Windows 10, 11, and Linux RELATED COURSES Data Structures, Algorithms & Complexity Object-Oriented Programming in Java Database Management Systems Advanced Programming Operating Systems Computer Architecture Software Engineering #LI-Hybrid Salary Note This estimate represents the typical salary range for this position based on experience and other factors (geographic location, etc.). Actual pay may vary. This job posting will remain open until the position is filled. Combined Salary Range USD $26.00 - USD $26.00 /Hr. Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Work For Us Are you ready to join a dynamic team, focused on Safety, Wellness and Service? Do you thrive on working independently throughout the construction industry? Ignite your career by joining Triad Engineering, Inc.'s team as a Construction Materials Field Technician. While each day may include a wide array of responsibilities, your focus on and dedication to quality will ensure success. No experience? No worries! We are committed to investing in our team members and will provide training and advancement opportunities through technician certification programs. Feel the security of working for the Triad team by experiencing the following benefits: Excellent compensation and benefits package including: * Medical, dental, vision, life insurance * 401(k) plan * Paid holidays * Employee Stock Ownership Plan (ESOP) * Company truck and fuel provided * Personal Protective Equipment provided * Clothing allowance * Career Advancement * Wellness Program What You'll Do As a Construction Materials Field Technician, your exposure to a wide variety of responsibilities may include but not be limited to: * Perform routine quality control test procedures including concrete and nuclear moisture / density testing * Complete and submit daily reports and Job Hazard Analysis forms * Follow all corporate and job site safety procedures * Become familiar with applicable plans and specifications * Notify supervisor or Project Manager immediately of problems and deviations from plans and specifications * Frequent exposure to clients * May occasionally attend job site related meetings * May occasionally perform routine testing in the lab Desired Qualifications * High school diploma or equivalent * Construction-related training or technical training desirable * Certifications in Concrete and Soil preferred * Must possess a valid driver's license and the ability to safely operate a motor vehicle * Must possess the ability to read, write and perform basic math * Must be comfortable communicating with the public * Must be comfortable performing basic computer functions * Must be available to work in all types of indoor and outdoor environments WHO WE ARE Triad Engineering, Inc. (Triad) is an employee-owned firm that cares about each other, our work, and our clients. Our involvement from property acquisition through construction affords us the ability to offer our expertise during all phases of a project which ultimately leads to greater success. At Triad, we are small enough to be responsive to individual client needs, yet large enough to remain at the forefront of our industry. We've heard from clients that our people make the difference. Come join the Triad team and help us continue to be the difference. As a multi-disciplinary consulting firm established in 1975, we focus on providing geotechnical and civil engineering, landscape architecture, environmental services, land surveying, construction testing and monitoring, drilling, and construction materials laboratory services, to a wide range of clients. We pride ourselves on being an employee-owned firm with nearly 200 employees throughout West Virginia, Virginia, Maryland, Pennsylvania and Ohio. Triad Engineering, Inc. is a Drug-Free Workplace. As a condition of employment, candidates are required to take and pass a pre-employment drug screening.

Job Title: Engineering Technician - Entry-Level Opportunity Kickstart your engineering career in a dynamic R&D environment! We're looking for a motivated individual with a passion for building, testing, and troubleshooting electro-mechanical systems. This role offers hands-on experience with cutting-edge technology and the chance to collaborate closely with engineers on real-world product development. If you're an entry-level electrical or mechanical engineer eager to learn and grow, this is the perfect opportunity. Why You'll Love This Role + Hands-On Engineering Experience: Work directly with small-scale electro-mechanical systems in a lab setting. + Influence Product Design: Contribute to Design for Manufacturability and implementation decisions. + Collaborative Environment: Partner with experienced engineers and technicians to bring innovative products to life. + Career Growth: Gain exposure to advanced assembly techniques, quality assurance, and continuous improvement processes. What You'll Do + Assemble, test, and troubleshoot components, products, and systems. + Use hand tools, soldering equipment, and precision instruments to build and maintain assemblies. + Inspect components for quality and ensure compliance with engineering specifications. + Document test results and maintain accurate production records. + Support continuous improvement initiatives to enhance efficiency and reduce costs. + Maintain a clean, organized, and safe workspace. What We're Looking For + Education: Degree in Electrical, Mechanical, or related Engineering field (or equivalent hands-on experience). + Skills & Interests: + Strong attention to detail and problem-solving mindset. + Ability to read and interpret technical drawings and preliminary documentation. + Comfortable using hand tools, power tools, and measurement instruments. + Basic knowledge of soldering, crimping, and PCBA work (training provided if needed). + Bonus Points For: + Familiarity with IPC J-STD-001 soldering standards. + Exposure to ERP/MRP systems or Lean/Six Sigma principles. + A&P or ASE certifications. Work Environment You'll work in a state-of-the-art R&D lab, collaborating with engineers on innovative projects. Personal protective equipment is provided to ensure a safe and productive environment. Job Type & Location This is a Contract to Hire position based out of Pittsburgh, PA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Pittsburgh,PA. Application Deadline This position is anticipated to close on Dec 27, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

The Engineering Technician will design, program, manufacture, and verify a variety of programs, setups, and fixtures for NC machines and offline processes. They will also assist Production and Quality as a technical resource for trouble shooting and applications assistance. Duties and Responsibilities Creation and verification of setups, fixtures, and programs for NC machines and offline processes. Assist in the training of production employees on setups, fixtures, and machine operations. Trouble shooting and applications assistance on machining, burning, forming, and welding processes. Process improvement identification and implementation. Modeling and exportation of new parts and rev changes. Assists the Manufacturing Engineer with developing, managing, and implementing projects as needed. Assists and guides others on the team to meet project specifications. Assists engineers in maintaining tool crib. Stocking and issuing of consumable inventory. Assists with other projects assigned from manufacturing engineers or management team. Assists in the analysis of space requirements, preparation of layouts for new equipment and projects, and evaluation of flow of materials to improve operating efficiency and reduction of errors. Maintains engineering/fixture building area, including but is not limited to cleaning, PM equipment, and keeping the area organized. Responsible for providing error-free work to all internal and external customers as related to the output of the position. Ability and willingness to work a flexible schedule, handle special projects, perform clerical tasks, and assist in other departments including Quality Assurance and Production. Skills and Qualifications High school diploma or equivalent required. 2 or 4 year degree preferred. Five years of manufacturing experience required. Lean manufacturing experience preferred. 1 - 3 years of NC Machine operations required. VMC or HMC experience preferred. Proficient in basic computer skills (MS Word, MS Excel, MS Outlook). Strong math and problem solving skills with the use of geometry and trigonometry. Able to read and use common measuring devices. Able to read and understand prints and drawings. Able to work in a high-paced, manufacturing environment. Able to work as part of a team toward common goals. Strong communication skills. Speak conversational English. Physical ¨NBSP; Requirements Ability to lift 20-50 lbs. repetitively throughout the course of a shift. Ability to bend, sit, stand, twist, and stoop for prolonged periods of time. Ability to walk 2-5 miles throughout a shift. Have good vision of 20/30 with corrective lenses. Ability to maintain coordination of hand and finger movements to grasp and manipulate objects with precision. Subject to environmental conditions that occur indoors and outdoors which includes but is not limited to exposure to changing temperatures, loud noises, and vibration from use of equipment and the following: Hazards: Variety of physical conditions, such as proximity to moving mechanical parts, electrical current, exposure to high heat or exposure to chemicals. Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin- fumes, odors, dusts, mists, gases, or poor ventilation. Oils: There is air and/or skin exposure to oils and other cutting fluids. ** **

Civil Engineering Technician, New Brighton, PA Office The EADS Group, Inc., which began operation in 1955, is actively seeking a full-time Civil Engineering Technician located in our New Brighton, PA office. An Engineering Technician is needed to support our current clients and workload. The preferred candidate will have an Associate Degree in Engineering Technology or a Bachelor Degree in Environmental Science, or a related field, excellent verbal and written communication skills and the willingness and ability to do field work. Certifications/experience relating to sewage enforcement, wetland delineation, permitting, environmental site assessment, and CADD or GIS software is a plus. Sewage enforcement officer certification or ability to obtain is preferred. Under the direction of a Project Manager, the Civil Engineering Technician will be responsible for assisting with the preparation of design deliverables, permit application packages, report preparation, data analysis, field investigations, inspections, wetland delineations, stream surveys and sewage enforcement. We offer a flexible workweek, competitive benefits package, and salary commensurate with experience. *Equal Opportunity Employer/Veterans/Disabled

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Seeking your next challenge in the field of electronics? We are looking for Electronic Technicians to grow with us! This position is ideal for Electronic Techs who are looking for challenging and rewarding work. In this Electronics position, you will need strong attention to detail, troubleshooting and assembly experience. The Electronic Technician position performs testing and troubleshooting of electronic components to ensure the quality of each assembly. The ideal candidate will have the ability to identify and repair defects. The Electronic Technician is called upon to creatively solve problems, keep accurate records, and work in a safe manner. Core Competencies Include: * Sense of urgency and understanding of process flow * Good communication skills * Quality mind-set * Strong computer skills * Ability to stay organized and work in a safe manner. * Soldering experience * Use of electronic testing equipment Qualifications: * Associate Degree in Electrical/Electronics engineering or equivalent training and experience * High School Diploma plus technical certificate, vocational schooling and/or accepted correspondence course; or any equivalent combination of related education and experience. We offer a competitive compensation package with affordable health, dental and vision plans. We additionally provide company paid life, AD&D and disability benefits as well as a 401(k) retirement plan with employer match contributions. Looking to continue your education? We also offer a tuition reimbursement program for those who may be looking to take another step in this exciting and growing field.

Seeking your next challenge in the field of electronics? We are looking for Electronic Technicians to grow with us! This position is ideal for Electronic Techs who are looking for challenging and rewarding work. In this Electronics position, you will need strong attention to detail, troubleshooting and assembly experience. The Electronic Technician position performs testing and troubleshooting of electronic components to ensure the quality of each assembly. The ideal candidate will have the ability to identify and repair defects. The Electronic Technician is called upon to creatively solve problems, keep accurate records, and work in a safe manner. Core Competencies Include: Sense of urgency and understanding of process flow Good communication skills Quality mind-set Strong computer skills Ability to stay organized and work in a safe manner. Soldering experience Use of electronic testing equipment Qualifications: Associate Degree in Electrical/Electronics engineering or equivalent training and experience High School Diploma plus technical certificate, vocational schooling and/or accepted correspondence course; or any equivalent combination of related education and experience. We offer a competitive compensation package with affordable health, dental and vision plans. We additionally provide company paid life, AD&D and disability benefits as well as a 401(k) retirement plan with employer match contributions. Looking to continue your education? We also offer a tuition reimbursement program for those who may be looking to take another step in this exciting and growing field.

Responsible for wiring of new/rebuilt pumps, control boxes, blenders, and blender data acquisition (DAQ). Conducts troubleshooting of new/rebuilt pumps, control boxes, blenders, and blender data acquisition (DAQ). Responsible for completion of cable building and technical communication vehicle (TCV) computer installation. Essential Duties and Responsibilities: * Performs entry level tasks such as troubleshooting pumps, blenders, TCVs, and cable building with constant supervision. * Troubleshoots and repairs electrical/electronic equipment including but not limited to programmable controls, power supplies, instrumentation, gages and test equipment. * Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved. * Maintains company-required performance and maintenance records for identified equipment. * Performs preventive maintenance functions as directed with constant supervision. * Performs other related duties as required. Educational and Other Requirements: * High school education or equivalent preferred. * Two-year technical degree, accredited apprenticeship program or the equivalent working experience is a plus. * Must possess the ability to work in a fast-paced environment. * Entry level knowledge of basic schematic reading, wiring procedures, soldering techniques, use of test equipment, and basic electronic troubleshooting theory preferred. * Valid driver's license required * Must work with upper level technician until proficient * Must possess ability to work independently and as a member of team * Frequent travel may be required. * Must be highly safety conscious. * Must be sensitive to confidential information. Mental and Physical Requirements: * Able to read, speak and write English. * Ability to use sophisticated computer software programs to achieve job functions. * Must be willing to work any shift and overtime as required. * Able to work under stressful conditions at times. * Performing physical activities that require considerable use of your arms and legs, such as climbing, lifting, balancing, walking, stooping, and handling of materials. * Good verbal and written communication skills. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Responsible for wiring of new/rebuilt pumps, control boxes, blenders, and blender data acquisition (DAQ). Conducts troubleshooting of new/rebuilt pumps, control boxes, blenders, and blender data acquisition (DAQ). Responsible for completion of cable building and technical communication vehicle (TCV) computer installation. Essential Duties and Responsibilities: Performs entry level tasks such as troubleshooting pumps, blenders, TCVs, and cable building with constant supervision. Troubleshoots and repairs electrical/electronic equipment including but not limited to programmable controls, power supplies, instrumentation, gages and test equipment. Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved. Maintains company-required performance and maintenance records for identified equipment. Performs preventive maintenance functions as directed with constant supervision. Performs other related duties as required. Educational and Other Requirements: High school education or equivalent preferred. Two-year technical degree, accredited apprenticeship program or the equivalent working experience is a plus. Must possess the ability to work in a fast-paced environment. Entry level knowledge of basic schematic reading, wiring procedures, soldering techniques, use of test equipment, and basic electronic troubleshooting theory preferred. Valid driver's license required Must work with upper level technician until proficient Must possess ability to work independently and as a member of team Frequent travel may be required. Must be highly safety conscious. Must be sensitive to confidential information. Mental and Physical Requirements: Able to read, speak and write English. Ability to use sophisticated computer software programs to achieve job functions. Must be willing to work any shift and overtime as required. Able to work under stressful conditions at times. Performing physical activities that require considerable use of your arms and legs, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Good verbal and written communication skills. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

GE Vernova's Power Conversion & Storage business combines advanced energy conversion and storage systems to meet the electrification needs of utilities and industries. With a focus on power stability, energy storage and industrial electrification solutions, Power Conversion & Storage empowers customers by addressing their most complex electrification challenges and accelerating their transition to a sustainable, decarbonized future. We're looking for someone who is passionate about designing and/or controlling low, middle and high voltage power electronics converters. These converters deliver high performance (better than 98% of efficiency) in an environment with condensation risks, with high vibrations (marinized converters), shock proved, Arc flash proved for Industry, Oil and Gas, Marine or Military applications. The accuracy and precision is better than the unit percent. This position will push the limits of technology with a strong team in a company with culture, ethics and ambitions. Job Description Roles and Responsibilities * Perform L3 Engineering support (functional analyses, simulations, detailed recording analysis, BOM parts replacement, RCA) to support North America Customers. * Work with L2 technical support and Field Service Engineer to gather site data related to customer technical issue * Write Guidelines for Technical issue troubleshooting while consulting Technical Experts and working with the Technology related center of excellence Required Qualifications * Masters degree with a minimum of 3 years experience in MV7, SD7k Commissioning or Manufacturing or Testing or Sizing or Software Development or within a Technical Support team OR Bachelors degree with a minimum of 5 years experience in MV7, SD7k Commissioning or Manufacturing or Testing or Sizing or Software Development or within a Technical Support team * Minimum of 2 years experience in P80i Desired Characteristics * Understand physical phenomena; strong theoretical and mathematical background; with the ability to understand new concepts and ability to communicate information clearly * Creative, passionate and integrate into a team * Willingness to travel when needed * Autonomous, curious with the ability to understand new concepts, coach other engineers, and integrate into a team * Strong Practical and Field experience GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes For candidates applying to a U.S. based position, the pay range for this position is between $98,400.00 and $164,000.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: discretionary annual bonus. This posting is expected to remain open for at least seven days after it was posted on December 11, 2025. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Job Title: Engineering Technician - Entry-Level Opportunity Kickstart your engineering career in a dynamic R&D environment! We're looking for a motivated individual with a passion for building, testing, and troubleshooting electro-mechanical systems. This role offers hands-on experience with cutting-edge technology and the chance to collaborate closely with engineers on real-world product development. If you're an entry-level electrical or mechanical engineer eager to learn and grow, this is the perfect opportunity. Why You'll Love This Role * Hands-On Engineering Experience: Work directly with small-scale electro-mechanical systems in a lab setting. * Influence Product Design: Contribute to Design for Manufacturability and implementation decisions. * Collaborative Environment: Partner with experienced engineers and technicians to bring innovative products to life. * Career Growth: Gain exposure to advanced assembly techniques, quality assurance, and continuous improvement processes. What You'll Do * Assemble, test, and troubleshoot components, products, and systems. * Use hand tools, soldering equipment, and precision instruments to build and maintain assemblies. * Inspect components for quality and ensure compliance with engineering specifications. * Document test results and maintain accurate production records. * Support continuous improvement initiatives to enhance efficiency and reduce costs. * Maintain a clean, organized, and safe workspace. What We're Looking For * Education: Degree in Electrical, Mechanical, or related Engineering field (or equivalent hands-on experience). * Skills & Interests: * Strong attention to detail and problem-solving mindset. * Ability to read and interpret technical drawings and preliminary documentation. * Comfortable using hand tools, power tools, and measurement instruments. * Basic knowledge of soldering, crimping, and PCBA work (training provided if needed). * Bonus Points For: * Familiarity with IPC J-STD-001 soldering standards. * Exposure to ERP/MRP systems or Lean/Six Sigma principles. * A&P or ASE certifications. Work Environment You'll work in a state-of-the-art R&D lab, collaborating with engineers on innovative projects. Personal protective equipment is provided to ensure a safe and productive environment. Job Type & Location This is a Contract to Hire position based out of Pittsburgh, PA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Pittsburgh,PA. Application Deadline This position is anticipated to close on Dec 27, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: Bonus payments every 6 months Rich health plans Retirement planning with our 100% company-paid Employee Stock Ownership Trust Position Summary: A position in Aerotech's Electrical R&D department as an electrical technician offers opportunities in design and testing of our industry-leading motion control hardware. Primary responsibilities of an electrical technician include building fixtures, testing motion-control components, assisting with compliance documentation, and coordinating with engineering and manufacturing teams. Additionally, this position offers the opportunity for design and troubleshooting work associated with wire harnesses, circuit board assemblies, motors, and other equipment. This role is focused on developing a valued technical expert who will produce high quality, detailed work based on established standards, guidelines and procedures. What will your day look like? At Aerotech, you will: Work on cutting-edge technologies used in motion control components Collaborate with leading engineers in the field of automation and robotics on a close-knit team Use electronic test equipment such as oscilloscopes, temperature recorders, DVMs and current probes to perform electrical testing of servo drives at voltages ranging from 120VAC to 480VAC Collect, document and archive test results in order to show compliance with UL and CE electrical safety requirements. Design, document and build test fixtures used for electrical safety and EMC compliance testing Provide general support for the Electrical Engineering department including component validation, troubleshooting and documentation What will separate you from the rest? Experience with: Servo drives or other industrial control systems Electrical safety standards used for UL and CE compliance Minimum Qualifications: Associate's degree in Electronics or Electrical Engineering Technology or a related field Two years of related professional experience Equivalent combination of education and experience may be considered Must be authorized to work in the US currently and in the future without employer sponsorship Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! Competitive compensation Bi-annual bonus Annual raise eligibility UPMC Health Insurance Dental insurance Vision insurance Life insurance Retirement Plan Employee Stock Ownership Trust 401k Paid time off Parental leave Referral program Professional development assistance Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company.

Job Description Work For Us Are you ready to join a dynamic team, focused on Safety, Wellness and Service? Do you thrive on working independently throughout the construction industry? Ignite your career by joining Triad Engineering, Inc.'s team as a Construction Materials Field Technician. While each day may include a wide array of responsibilities, your focus on and dedication to quality will ensure success. No experience? No worries! We are committed to investing in our team members and will provide training and advancement opportunities through technician certification programs. Feel the security of working for the Triad team by experiencing the following benefits: Excellent compensation and benefits package including: Medical, dental, vision, life insurance 401(k) plan Paid holidays Employee Stock Ownership Plan (ESOP) Company truck and fuel provided Personal Protective Equipment provided Clothing allowance Career Advancement Wellness Program What You'll Do As a Construction Materials Field Technician, your exposure to a wide variety of responsibilities may include but not be limited to: Perform routine quality control test procedures including concrete and nuclear moisture / density testing Complete and submit daily reports and Job Hazard Analysis forms Follow all corporate and job site safety procedures Become familiar with applicable plans and specifications Notify supervisor or Project Manager immediately of problems and deviations from plans and specifications Frequent exposure to clients May occasionally attend job site related meetings May occasionally perform routine testing in the lab Desired Qualifications High school diploma or equivalent Construction-related training or technical training desirable Certifications in Concrete and Soil preferred Must possess a valid driver's license and the ability to safely operate a motor vehicle Must possess the ability to read, write and perform basic math Must be comfortable communicating with the public Must be comfortable performing basic computer functions Must be available to work in all types of indoor and outdoor environments WHO WE ARE Triad Engineering, Inc. (Triad) is an employee-owned firm that cares about each other, our work, and our clients. Our involvement from property acquisition through construction affords us the ability to offer our expertise during all phases of a project which ultimately leads to greater success. At Triad, we are small enough to be responsive to individual client needs, yet large enough to remain at the forefront of our industry. We've heard from clients that our people make the difference. Come join the Triad team and help us continue to be the difference. As a multi-disciplinary consulting firm established in 1975, we focus on providing geotechnical and civil engineering, landscape architecture, environmental services, land surveying, construction testing and monitoring, drilling, and construction materials laboratory services, to a wide range of clients. We pride ourselves on being an employee-owned firm with nearly 200 employees throughout West Virginia, Virginia, Maryland, Pennsylvania and Ohio. Triad Engineering, Inc. is a Drug-Free Workplace. As a condition of employment, candidates are required to take and pass a pre-employment drug screening.