Engineering technician jobs in Rochester, NY

Job Description Manufacturing Technician It all starts with you! When you join the OLED Manufacturing Technician team you will be part of the core group who handles set-up, operation, maintenance and troubleshooting of machines and equipment used in manufacturing, R&D, pilot, test and production materials at both intermediate and finished good levels. You will monitor quality, test devices, collect and analyze data and more! You can't mind being on your feet as you will be working on our machines and tools in a busy environment. What You'll Do Every Day Each day you will help raise product quality and profitability by operating equipment, testing materials and products, establishing new/modified equipment run parameters, assisting with equipment installation/validation, and working on continuous improvement of processes and procedures. You will collaborate closely with a team of engineers and scientists and may also contribute to special projects. You will always comply with safety regulations and maintain clean work areas. Although the majority of your work will be in what we call the Fab or the Lab, you will also work at your desk to document statistical process control, record results, and write procedures. You will contribute to the Quality Management System in Rochester and help OLEDWorks maintain ISO9001 and IATF certifications. Skills You Must Bring You bring a quality and safety focused attitude, and you have hands-on working experience in a fabrication type environment. It is helpful if you bring organic and inorganic materials knowledge as well as skills in mechanical operation in a vacuum environment. You are comfortable working independently as well as coordinating with others and your ability to problem solve is a must. You can adapt within a changing and growing company environment and seek out solutions with a positive outlook. You have demonstrated the delivery of great customer service in previous employment and understand the importance of the same at OLEDWorks. This position is on-site in Rochester. We will need someone who can stand 50% of the time, walk, reach, bend, and lift/move boxes and materials up to 25 lbs. Occasionally we will need something heavier moved/lifted using assistance. The ability to use tools and machines daily is required. We have a hard working and fun team here, consider joining our team today! OLEDWorks is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

A growing advanced-manufacturing team is looking for an Engineering Technician to support the design, development, testing, and production of ultrasound transducer technology. This role is hands-on, technical, and highly collaborative-perfect for someone who enjoys building, troubleshooting, and improving complex electronic/mechanical assemblies. Responsibilities What You'll Do Support prototyping and build processes for ultrasound transducers and related test fixtures Perform testing at various production stages using electronic test equipment (oscilloscopes, multimeters, etc.) Analyze test results and share findings with engineering teams Participate in fine-detail assembly work, including processes performed under a microscope Develop and refine assembly documentation, test procedures, and product specifications Work side-by-side with engineering and production to resolve performance or design issues Help drive continuous improvement in manufacturing processes and product quality Provide technical support to internal teams and customers when needed Qualifications What Makes You a Strong Fit 2-year technical degree in a STEM-related field 3+ years of experience in a manufacturing or technical products environment Strong familiarity with electronic test & measurement equipment Comfortable performing fine assembly under a microscope A problem-solver who can diagnose root causes and think conceptually Solid documentation, troubleshooting, and hands-on technical skills Seniority Level Associate Industry Appliances, Electrical, and Electronics Manufacturing Manufacturing Electrical Equipment Manufacturing Employment Type Full-time Job Functions Design Engineering Skills Transducers Manufacturing Measurements Engineering Electronics Microscopes Soldering Printed Circuit Board

Exempt No Work Schedule Full Time Division Engineering Reports To Director of Engineering and Construction Assist with the planning, design, permitting, and construction of Company facilities. Duties and Responsibilities ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. * Coordinate the planning, application, design, and construction of new customer service lines. * Review active construction projects to ensure that specifications, plans, procedures, and permits are being followed. * Assist in the preparation of permit applications, reports, etc. * Conduct hydrant flow tests. * Maintain, organize, and archive data regarding company assets (drawings, specifications, etc.) * Gather field data using various equipment, including global positioning system (GPS) collection units. * Coordinate responses to external requests for mapping data (PA One Call, governmental agencies, etc.) * Develop drawings in computer-aided design (CAD) format for Company projects. * Be available for emergency duty as assigned. * Consistently demonstrate positive and professional behavior with all individuals contacted on behalf of the Company including customers and employees. Qualification Requirements EDUCATION and/or EXPERIENCE: * Associate degree in engineering technology, Computer Aided Design (CAD), or related discipline from an accredited educational institution * Minimum of 2 years of related work experience required. CERTIFICATES, LICENSES, REGISTRATIONS: * Possess a valid PA driver's license. * Backflow Device Tester Certification and a PA Class E Water System Operator's license required within one year of employment. OTHER SKILLS AND ABILITIES: * Significant course work and experience with AutoCAD software products is essential. * Proficiency with Microsoft Office, ESRI Geographic Information System (GIS) products, and GPS equipment is highly desirable. OTHER SKILLS: * Strong and effective communication and presentation skills, both oral and written. * Strong comprehension skills. * Strong problem-solving and critical-thinking skills. * Ability to read, analyze, and interpret drawings, graphs, formulas, technical journals/documents, or governmental statutes and regulations. * Proficient use of standard office equipment. * Proficient in Microsoft Suite products. * Proficient use of AutoCAD, GIS software, GPS software and hardware. * Proficient with Engineer software packages such as WaterCAD and SewerCAD. Physical Demands PHYSICAL DEMANDS: * Required to sit for extended periods of time. * Required to sit, stand, and walk; occasionally required to stoop, kneel, crouch, and ascend and descend stairs. * Required to reach with hands and arms and push items overhead. * Regularly lift/move up to 15-25 lbs. * Required to talk, hear, and see. Vision requirements for this position include close vision, distance vision, peripheral vision, depth perception, ability to adjust focus and ability to differentiate between colors. * Dexterity is mandatory as this job requires frequent use of hands and fingers, including keystrokes on computer keyboard and calculator. * The employee must be able to work under stress and work additional hours to meet reporting deadlines. * Ability to drive a company-owned vehicle to visit field operations as necessary. * Ability to wear personal protective equipment (PPE) including gloves, hard hats, safety glasses, and other PPE as required. WORK ENVIRONMENT: * The position primarily works in an office environment. * The noise level in the work environment is usually moderate. * Frequent interactions with other employees. * While performing the duties of this job, the employee frequently works in outside weather conditions. THIS IS A SAFETY-SENSITIVE POSITION AND WOULD REQUIRE COMPLIANCE WITH ALL APPLICABLE SAFETY GUIDELINES AND REGULATIONS. This is a Collective Bargaining Unit position No Apply Now

Pactiv Evergreen is now a part of Novolex. Novolex is a leading manufacturer of food, beverage, and specialty packaging that supports multiple industries, including foodservice, restaurant delivery and carryout, food processing, grocery and retail, and industrial sectors. Our innovative product portfolio is designed to meet the diverse needs of businesses worldwide and the millions of customers they serve. Through continuous investment in research and development, we are committed to engineering more sustainable choices for the future. Our extensive manufacturing network spans North America and Europe, including two world-class plastic film recycling centers. Discover more about Novolex, our 20,000+ family members and our commitment to innovation and sustainability at **************** Our Social Responsibility platform features a robust, employee-led Give Back program, which includes a matching gifts plan, community grants initiative, and our annual Company-wide Month of Action campaign. With each of these initiatives, our employees are empowered and equipped to give back to their communities and support the non-profits important to them and their families. Through our Give Back program, we own our commitment to Social Responsibility and live our purpose of Packaging a Better Future. Responsibilities This position provides support for the reliability of all automation and control systems throughout the facility. The individual will work closely with all plant personnel to perform tests, diagnostics, repairs, improvements and upgrades to all equipment, instrumentation, process and procedures. Responsibilities: ● Drive a zero EHS incident culture, support and participate in incident investigations to determine root cause and identify preventive actions, correct unsafe conditions and acts immediately, and use every incident or near miss as a teaching moment for others ● Monitor, adjust, calibrate and repair manufacturing equipment, instruments, fixtures, etc. ● Conduct in-depth PLC, HMI, motor and drive troubleshooting and provide effective solutions - Allen Bradley required with at least one other manufacturer (i.e. Mitsubishi, Schneider, GE, Opto 22, etc.) ● Read and modify PLC ladder diagrams ● Perform electrical and electronic installations and modifications including drives and programming controllers ● Working knowledge of AC vector and servo drive technology. ● Understand in-depth electric circuitry, electronics and electromechanical concepts - AC and DC, Sinking / Sourcing, Analog, etc. ● Troubleshoot and maintain Fanuc robotic automation. (Palletizers, Case erectors, Pick and Place) ● Basic understanding of hydraulics, pneumatics and mechanical concepts ● Basic understanding of PC components ● Interpret all levels of drawings, wiring diagrams, schematics, specifications, etc. Knowledge of CAD system (i.e. AutoCAD, Vizio, etc.) ● Stay up to date with the latest state-of-the-art automation and control techniques ● Utilize problem solving techniques including PDCA to solve problems to root cause, implement actions that prevent reoccurrence, improve operations, etc. ● Supply higher level technical assistance to plant shift electrician team ● Provide training to all levels of the organization ● Ability to supervise contractors to minimize scheduled and unscheduled downtimes ● Maintain and manage the engineering department technical procedures, manuals and drawings, including records of as-built equipment and process changes ● Occasional need to work flexible hours. May include weekend and/or holiday work, subject to call-ins Qualifications Qualifications: ● High school graduate or equivalent required ● Apprenticeship or equivalent training ● Associate's degree in maintenance or industrial technology preferred ● Minimum five years of industrial maintenance experience with extensive automation and controls work ● Proficient in computer applications including Microsoft applications, Outlook, SAP, etc. ● Knowledge OSHA Electrical Standards, National Electric Code (NEC) ● Strong troubleshooting skills and logic to solve problems to root cause ● Proactive and self-motivated to work effectively with minimal supervision ● Good written and verbal communication skills ● Ability to make decisions under time constraints and tight deadlines ● Able to interact with other associates in a team-oriented environment Pactiv Evergreen is committed to a diverse and inclusive workforce. Pactiv Evergreen is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age national origin, physical or mental disability, genetic information, gender identity and/or expression, marital status, veteran status or other characteristics or statuses protected by law. For individuals with disabilities who would like to request an accommodation, please call ************** or email *********************. All information will be kept confidential according to EEO guidelines and applicable laws. #LI-TM1 #INMISC Responsibilities Job Description This position provides support for the reliability of all automation and control systems throughout the facility. The individual will work closely with all plant personnel to perform tests, diagnostics, repairs, improvements and upgrades to all equipment, instrumentation, process and procedures. Responsibilities: ● Drive a zero EHS incident culture, support and participate in incident investigations to determine root cause and identify preventive actions, correct unsafe conditions and acts immediately, and use every incident or near miss as a teaching moment for others ● Monitor, adjust, calibrate and repair manufacturing equipment, instruments, fixtures, etc. ● Conduct in-depth PLC, HMI, motor and drive troubleshooting and provide effective solutions - Allen Bradley required with at least one other manufacturer (i.e. Mitsubishi, Schneider, GE, Opto 22, etc.) ● Read and modify PLC ladder diagrams ● Perform electrical and electronic installations and modifications including drives and programming controllers ● Working knowledge of AC vector and servo drive technology. ● Understand in-depth electric circuitry, electronics and electromechanical concepts - AC and DC, Sinking / Sourcing, Analog, etc. ● Troubleshoot and maintain Fanuc robotic automation. (Palletizers, Case erectors, Pick and Place) ● Basic understanding of hydraulics, pneumatics and mechanical concepts ● Basic understanding of PC components ● Interpret all levels of drawings, wiring diagrams, schematics, specifications, etc. Knowledge of CAD system (i.e. AutoCAD, Vizio, etc.) ● Stay up to date with the latest state-of-the-art automation and control techniques ● Utilize problem solving techniques including PDCA to solve problems to root cause, implement actions that prevent reoccurrence, improve operations, etc. ● Supply higher level technical assistance to plant shift electrician team ● Provide training to all levels of the organization ● Ability to supervise contractors to minimize scheduled and unscheduled downtimes ● Maintain and manage the engineering department technical procedures, manuals and drawings, including records of as-built equipment and process changes ● Occasional need to work flexible hours. May include weekend and/or holiday work, subject to call-ins

About the Role This team member will play a critical role within our MEP team, leading mechanical system designs, performing complex calculations, selecting equipment, and managing the preparation of engineering documents. The role involves collaborating with senior engineers, mentoring junior staff, and ensuring compliance with industry standards, energy codes, and best practices for HVAC, plumbing, and mechanical building systems. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: Binghamton, NY Horseheads, NY Rochester, NY Towanda, PA Williamsport, PA Key Responsibilities Lead and oversee the design of HVAC, plumbing, and mechanical building systems. Conduct load calculations, energy modeling, system sizing, and equipment selection for various projects. Utilize AutoCAD and Revit to develop and refine engineering designs and construction documents. Research and ensure compliance with building codes, energy efficiency requirements, and industry standards. Manage projects independently or alongside senior engineers, ensuring deadlines and budgets are met. Mentor junior engineers and technicians, providing technical guidance and knowledge-sharing. Assist in client communications, site visits, and coordination with multidisciplinary teams. Prepare technical reports, engineering specifications, and cost estimates. Qualifications 5-9 years of experience in mechanical engineering, HVAC design, or a related field. Bachelors degree in Mechanical Engineering preferred. Proficiency in AutoCAD, Revit, and engineering software for mechanical system design. Strong leadership, verbal, and written communication skills, with the ability to collaborate across teams. In-depth knowledge of HVAC, plumbing, and energy-efficient mechanical systems. Holds an Engineer-in-Training (EIT) certification or is working toward a Professional Engineer (PE) license. Benefits Holidays PTO Health Insurance FSA/ HSA Life Insurance 401(K) plan Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Join our Toyota Material Handling North America team as an Energy Solutions Electrical Engineering Technician! The Role: We're seeking a passionate and dedicated Electrical Engineering Technician who brings creativity, problem-solving skills, and a hands-on approach to the table. In this role, you'll contribute to the development of moderately complex electronic designs in the energy solutions space. You'll be involved in designing and specifying electrical components, harnesses, and electronic assemblies - while also rolling up your sleeves for prototype builds and troubleshooting. We value innovative and creative ideas - yes, even during meetings (where snacks are always welcome). If you enjoy tackling challenges with positivity and a bit of humor, you'll feel right at home here. What You'll Be Doing: Collaborate with cross-functional teams - electrical, mechanical, software, and test engineers - to design electrical systems that meet application requirements. Generate and maintain documentation for harnesses, components, and assemblies. Partner with mechanical engineers on system-level design and integration. Diagnose and resolve electrical issues using lab equipment (multimeters, oscilloscopes, current probes, etc.). Participate in prototype builds, troubleshooting, and documenting design challenges. Evaluate designs for performance, safety, maintainability, and compliance with environmental standards. Support engineering analysis through simulations, design reviews, and performance verification. Create and revise design layouts for parts, assemblies, and functional units. Learn and develop CAD-based wire routing skills. Lead or participate in design and documentation reviews to ensure quality and effective communication. Investigate design problems and propose solutions. What We're Looking For: 8+ years of engineering technician experience in harness design, fabrication, and electrical troubleshooting. Strong knowledge of circuit fundamentals. Proficiency with electrical test equipment. Hands-on aptitude and strong problem-solving skills. Familiarity with wire harness manufacturing processes. Ability to solder and troubleshoot down to the component level. Experience with - or willingness to learn - CAD tools such as CREO and Altium. Ability to build prototypes from schematics or drawings. Strong interpersonal skills with the ability to work across cultures and disciplines. Adaptable, flexible, and comfortable in a dynamic environment. Detail-oriented with critical thinking skills and a positive, collaborative mindset. What Sets You Apart: Bachelor's or Associates Degree. Comprehensive knowledge of wire harness design, materials, and manufacturing. Comfort working in an agile, fast-paced environment. Self-starter with initiative and ownership. Experience with: Electronic hardware design and troubleshooting at the component level. CREO Schematic and Wiring Systems. 3D modeling software (CREO, SolidWorks, or similar). Altium Schematic Capture and PCB Design. Modifying/building boards and cables from schematics or drawings. Industrial or automotive product development. Where and When You'll Work: This is an in-person role located at our Rochester, New York office-ideal for those who thrive in a hands-on, team-oriented environment. What Your Total Compensation & Benefits Package will look like: Salary - $73,840 - 94,670 per year. Compensation depends on the selected candidate's education and experience. Relocation: This role may be eligible for relocation assistance. World Class Benefits: Competitive Salary Performance Bonus Generous Paid Time Off and 13 Paid Holidays Affordable Medical plans and no-cost Dental & Vision options 100% 401(k) match up to 6% Company-Paid Life Insurance, Short-Term Disability, and Long-Term Disability Tuition Assistance Program Employee Assistance Program (EAP) with access to mental health care, legal support, and financial guidance Recognition and Kaizen (continuous improvement) Reward Programs Meaningful opportunities for personal and professional development Best in class work culture! Big Name | Big Opportunities | Life is Better at Toyota Toyota Material Handling North America (TMHNA), the industry leader in forklift sales, comprises two main brands: Toyota Material Handling and The Raymond Corporation. We believe investing in the best people, products, and processes will fuel our future success, and we will always be driven by our foundational principles of “respect for people” and “continuous improvement”. With opportunities across North America, we are confident you will find the right position within TMHNA that can help you build a long, fulfilling career. Learn more here: https://www.toyotaforklift.com/careers Follow us on Social Media: Working at Toyota Material Handling | Glassdoor

Job DescriptionDescription: At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife ultra-filtered milk; Core Power High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. job purpose: The Process Engineer - Technical Team represents the fairlife technical team at their respective base site while being available to support other sites as needed. They will work on initiatives for capacity expansion, process/recipe changes, CI and troubleshooting, supporting processes and utilities. In fulfilling this role, the Process Engineer works cross-functionally with commercial, manufacturing, engineering, IT, quality, R&D, and other functions within fairlife. They will be the top liaison for procuring new processing and utility equipment while incorporating our learnings with new technologies and processes to improve quality, efficiency, and speed to market. Apart from the technical skills, this position will require a sense of purpose and ownership in your work, a sense of urgency in dealing with issues, innovative problem-solving skills, a desire to constantly learn, and above all, a 'One Team' mindset to work through challenges. responsibilities: With a focus on process and project engineering this role is responsible for the following: Define objectives and design standards for capacity expansion projects, ensuring lowest risk and total cost of ownership Develop design basis for new lines/plants, including mass/energy balances, process and utility flow diagrams, P&IDs, and validation protocols (HAZOP, FAT, IQ/OQ/PQ) Define the standards to which all plant processes and utilities will be designed, automated, constructed and operated, ensuring compliance with relevant federal, state, local and fairlife regulations Review and update functional specifications for processing and utility equipment; maintain documentation through commissioning and handover Assist in developing and commercializing new technologies to improve product quality, efficiency, and speed to market Review plant designs to reduce food safety risks and optimize efficiency; resolve complex processing issues escalated from plants Develop systems for monitoring and improving milk production processes (e.g., reduce milk losses, extended run time, CIP optimization, energy/water/chemical reuse) Collaborate with plant and project engineering teams to deliver projects on time and within budget; communicate design intent and project status to stakeholders Build global industry relationships to stay current on best-in-class dairy processing designs; support commercialization of new products Other duties as assigned skills/qualifications required: + years of progressive leadership experience in engineering and operations disciplines, background in low acid aseptic beverage preferred Bachelor's degree in engineering: Mechanical or Chemical Engineering with experience in the Dairy industry, or process engineering with experience in wider food industry. Advanced degrees or other professional certifications preferred but not required Proven track record of improving manufacturing processes through re-design and automation, and the introduction of new technologies Data analysis and Process modeling in Microsoft Excel is required Process and utility modeling using software's such as Aspen, SuperPro or others will be a value addition Strong understanding of process/product interactions with the ability to provide comprehensive reports on risk assessment and primary recommendations Demonstrated excellence in communication and presentation Familiarity with instrumentation (flow meters, level transmitters, RTDs/temperature transmitters, level probes, etc.) Soft skills: Ability to handle ambiguity and thrive in a fast paced, entrepreneurial work environment; Strong attention to detail; and analytical skills food safety requirements: Notify management of any repairs or adjustments that are required that may affect product quality or food safety. Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company. Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system. Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system. Position location: Coopersville, MI; Webster, NY Reports to: Sr. Process Development Engineer Travel requirements: Up to 75%, including some international Exempt/nonexempt: Exempt #LI-Hybrid #LI-BB1 *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$110,000-$130,000 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email ******************** . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

TYLin is a globally recognized, full-service infrastructure consulting firm committed to providing innovative, cost-effective, constructible designs for the global infrastructure market. With over 3,000 employees throughout the Americas, Asia, and Europe, the firm provides support on projects of varying size and complexity. Together, we enhance conventional designs with smarter, more resilient systems. We provide people with better mobility. We steward precious resources by finding more sustainable solutions. Job SummaryTYLin is looking for an intern to join our Rochester office for the Summer of 2026. As a Buildings Engineering Intern, you'll gain the opportunity to immerse yourself in diverse projects. Our structural engineering services for vertical structures include new construction projects, renovation, adaptive reuse, and historic preservation. This internship is your chance to be part of a collaborative community where you can expand your knowledge and sharpen your skills through hands-on meaningful work. * Please submit a cover letter and copy of your unofficial transcript with your application.Responsibilities & Qualifications What You Will Do Work with the project team to assist in preparing structural design and drawings for buildings (commercial, institutional, residential, etc.) from conceptual and preliminary stages of design through construction Perform field review for projects under construction Become familiar with engineering plans and details Assist with computer modeling & hand calculations What You Bring to the Team (Competencies) Exceptional organizational and time management skills, with a proven ability to efficiently prioritize and manage multiple tasks and deadlines simultaneously Excellent written and verbal communication skills, capable of producing clear documentation and interacting professionally with clients and colleagues Ability to work independently with minimal supervision while also able to effectively collaborate in a team environment Strong commitment to integrity, consistently demonstrating ethical, fair, and responsible behavior Commitment to innovation and continuous learning, with a passion for acquiring new skills and driving improvements Your Education and Experience Requires current 3rd year standing as an undergraduate, or a Graduate student standing, in an accredited Civil Engineering program or Architectural Engineering program (with a focus on structures) Completion of steel and concrete design classes preferred, completion of at least one of these classes required. Experience with MS Word, Excel and engineering software Familiarity with REVIT Structure beneficial Co-op or academic project experience related to commercial, institutional, or residential buildings would be considered an asset. Additional Information At TYLin, we strive to create a supportive and enriching learning environment that empowers you to make an impact. If you are excited about this role, we encourage you to apply even if you don't meet every qualification listed. TYLin is committed to pay equity. As part of this commitment, we offer a base compensation range of $20 to $30 per hour. We recognize that each candidate has a unique set of skills, experience, education, and competencies, which will be reflected in our offer. TYLin offers a comprehensive total rewards package. Our benefits may include extensive medical, disability and life insurance coverage, continuing education benefits, paid time off, employee assistance program and a retirement savings plan with company matching contributions. We encourage all candidates to explore our total rewards offering. TYLin is an equal opportunity employer, and we prohibit discrimination and harassment of any type as protected by federal, provincial, state or local laws. We celebrate diversity and are committed to creating an inclusive environment for all employees. The company and its employees are required to comply with all local health authority, legal or lawful client requirements.

**_About_** **_this_** **_position_** ** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Loctite , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow.This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world. Dare to learn new skills, advance in your career and make an impact at Henkel. **Sign on Bonus $7,500** **What you´ll do** + Resolve issues with PLCs, A/C and DC drives, and related equipment. + Work with Allen-Bradley, Siemens, Modicon PLCs; update schematics and documentation. + Identify root causes, implement corrective actions, and ensure resolution. + Maintain equipment reliability and minimize downtime. + Work with operations and maintenance teams; promote safety, quality, and cost efficiency. **What makes you a good fit** + Associate degree in Controls or Industrial Maintenance preferred + 5-10 years in manufacturing automation and controls + PLC programming, SCADA, troubleshooting, AutoCAD, networking, instrumentation + Ability to work in non-climate-controlled environments, climb ladders, and lift as needed **Some benefits of joining Henkel** + **Health Insurance:** affordable plans for medical, dental, vision and wellbeing starting on day 1 + **Work-Life Balance:** Paid time off including sick time, vacation time and holiday time + **Financial** : 401k matching, employee share plan with voluntary investment and Henkel matching shares, annual performance bonus, service awards and student loan reimbursement + **Family Support:** 12-week gender neutral parental leave (up to 20 weeks for parents giving birth), fertility support, adoption & surrogacy reimbursement, discounted child and elderly care, and scholarships + **Career Growth** : skill development programs, promotional opportunities and tuition reimbursement + **Local Benefits:** Products giveaways, available, On-site cafeteria available for staff during designated hours and onsite Health Care Center for acute cared and uniforms including services provided. The salary for this role is **$35.00- $42.00.** This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Henkel property and therefore, Henkel will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** 25085050 **Job Locations:** United States, NY, Geneva, NY **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America's largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms , Bison , Milk for Life , and Intense Milk . Here, you'll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Duties and Responsibilities: Installs, troubleshoots, repairs the following systems: PLC's, HMI's, VFD Drives, Vision Systems, Motor Control Centers, Power Distribution Centers, Motors (DC, AC, Stepper, Servo, etc.), Three Phase/Single Phase - power and control circuits, Control Panel layout and component installation. Carry out the departmental production plans and to jointly establish objectives. First responder to troubleshooting activities, leading, and assigning crew members and utilizing all available resources to correct controls issues and/or equipment/system breakdowns in an expedient manner. Works with Maintenance Mechanics on shift to trouble shoot root cause of problems and puts preventative controls in place to mitigate further issue. Communicate daily activity of work order status with business partners and coordinate shift-to-shift handoff. Document all modifications to equipment, systems, and respective documentation. Report to the Supervisor all operation issues during the shift, or as they become available. Investigate all events and provide full details of facts leading to the event, along with conclusions, and recommendations. Communicate openly to all other O-AT-KA Supervisor/Management staff, sharing problems and solutions. Assist with developing and modifying SOP's for processes within the department. Collaborate with all business partners to maintain an ongoing, uninterrupted operation to produce high quality products, while maintaining the department in an acceptable manner. Proactively evaluate obsolete equipment within the plant making recommendations for repair and/or replacement. Other duties as assigned. Experience & Education Required: Associates degree with 3-5 years of experience or equivalent combination of education and experience. Knowledge & Skills - Required: Experience in troubleshooting PLC based control systems, Rockwell Software desired. Experience with digital & analog temperature, pressure, flow, speed and weight measurement. Experience with discrete sensors. Experience with process loop calibration and equipment. Experience with industrial control networks and configuration such as Ethernet, Device Net, DH+ Experience working with 480v 3 phase power distribution. Experience with Allen Bradley motor controls and VFDs. Experience using electrical test equipment. Proven ability to work well independently and in a collaborative team environment Manufacturing experience with PLC's and automation controls. Working knowledge of electrical schematics, power distribution and controls, motor and motor controls, PLC logic controls, HMI's, and other industrial controls. Preferred: Dairy and/or food processing knowledge, especially Mixing & Blending, Retort operations, automatic packaging, mechanics of systems and equipment and sanitation and safety a plus Ability to set IP addresses using BOOTP with working knowledge of various software programs (or ability to learn) to include: RSLogix 5, RSLogix 500, RSLogix5000, Factory Talk to program PCLs, HIMs and Drive. WonderWare experience a plus. Confidentiality The Controls Technician is exposed to O-AT-KA customer and product information on a consistent basis. Management Responsibility The Controls Technician is an individual contributor role that operates under the general direction of the Controls Supervisor. Work Environment While performing the duties of this job, the employee frequently works near moving mechanical parts, high speed and processing equipment; is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals; is frequently exposed to moderate to high noise levels in the work environment. Must be able to see, grasp hold, walk, climb, bend, and stretch, lift up to 40 lbs. Will spend significant time in the production environment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Starting Pay: $30-35/hour* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position's qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionDescription: The Engineering Intern helps provide assistance to the engineering department by developing processes, work instructions, test specifications, BOMs, and drawings. The Engineering Intern will work closely with the engineering team to help support the needs of the department. Job Duties: · Plays an active role in product design/development including review of technical details, design for manufacture (cost effective and manufacturing process compliant) and design for test (efficient manufacturing test ensuring product quality). · Work output is directed by senior engineers. · Takes direction from Senior Engineer, Engineering Supervisor and/or Directors of Engineering. · Engage in product requirements definition and reviews. · Participate as reviewer in the design review process. · Identify, review and develop product improvements. · Identify, review and implement development process improvements. · Initiate interdepartmental communication. · Take part in sales proposal, service, or project process. · Works in a team environment Requirements: Education and Experience Required: · Pursuing a Bachelor's Degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or equivalent combination of education and experience. · Previous work in a manufacturing environment preferred · Knowledge of fabrication, machining, welding, inspection, and measurement techniques · Working knowledge of Inventor 3-D modelling software · Working knowledge of GD&T

The Engineering Intern helps provide assistance to the engineering department by developing processes, work instructions, test specifications, BOMs, and drawings. The Engineering Intern will work closely with the engineering team to help support the needs of the department. Job Duties: * Plays an active role in product design/development including review of technical details, design for manufacture (cost effective and manufacturing process compliant) and design for test (efficient manufacturing test ensuring product quality). * Work output is directed by senior engineers. * Takes direction from Senior Engineer, Engineering Supervisor and/or Directors of Engineering. * Engage in product requirements definition and reviews. * Participate as reviewer in the design review process. * Identify, review and develop product improvements. * Identify, review and implement development process improvements. * Initiate interdepartmental communication. * Take part in sales proposal, service, or project process. * Works in a team environment Requirements Education and Experience Required: * Pursuing a Bachelor's Degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or equivalent combination of education and experience. * Previous work in a manufacturing environment preferred * Knowledge of fabrication, machining, welding, inspection, and measurement techniques * Working knowledge of Inventor 3-D modelling software * Working knowledge of GD&T Salary Description $19.00-$24.00

We're hiring for a Quality Technician role onsite in Rochester, New York. In collaboration with process engineering, system design engineering and business development, the QC Technician (QCT) is involved in the inspection of customer samples, prototypes, and products for printed electronics applications. This is a position requiring flexibility, versatility, technical aptitude and attention to detail. Our Printed Electronics organization uses production-scale assets and processes for both development and production work. Processes include flexographic printing, electroless plating, end-of-line testing and packaging. The QCT will be cross trained on all inspection equipment and is expected to develop sufficient mastery for independent work in all aspects of the quality assurance process flow. Up to 25% of time is spent in either a Class 6 or 7 clean room, with the remaining time spent in a QC lab or office environment. Responsibilities: • Interpret instructions and execute work orders utilizing inspection equipment. • Collaborate with peers and team leaders to accomplish major objectives for the day while balancing workload, rotating job assignments, and completing routine tasks that are documented but not otherwise specified by supervision. • Inspection and quality assessment of incoming materials, WIP and product. • Identify problem conditions (Product, Process and/or general) and escalate to the appropriate supervision. • Perform routine cleaning and minor maintenance of inspection assets. • As needed, write and maintain standard operating procedures either independently or in collaboration with process engineering. • Routinely learn new tasks and adapt to new processes. • Comply with ISO 9001 and IATF 16949 Quality Management System requirements. • Sample management, Deviation Report (DR) reporting, Microscopy and Visual Inspection. • Backup and support for other QC roles within the organization, including chemical handling and analysis. Required Skills: • Operate measurement equipment in Class 6 & 7 cleanrooms with full head-to-toe gowning and adherence to clean room protocols. • Ability to visually inspect and detect defects in production and incoming materials. • Proficient in basic math functions and computer skills, including navigating screens, data entry, and email. • Work effectively with minimal supervision. • Ability to prioritize work to meet business needs. • Express oneself and communicate clearly, both written and verbal, and comprehend a variety of work requests. • Maintain a clean work area. • Maintain strict adherence to safety procedures and quality standards. • Dependable, maintain good attendance. Desired Skills: • Experience working in a clean room environment. • Experience in quality control role supporting production; including inspections and certification of incoming materials, WIP, product and post-production audit sampling. • Familiarity with FMEA (Failure Mode Effects Analysis) processes. • Experience with microscopy. • Experience with chemical handling. • Flexographic printing experience. • Internal Audit experience to ISO 9001. • Familiar with Statistical Process Control (SPC) . • Ability to read drawings including GD&T (Geometric Dimensioning & Tolerancing.

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

Join our Team as a Test Engineering Technical Specialist! The Role: We're seeking a passionate and dedicated Test Engineering Technical Specialist who brings enthusiasm and expertise to the table. You'll play a key role in supporting the development and testing of energy storage systems and the equipment used to operate them. You'll collaborate with a diverse group of engineers to build, repair, and test both prototype and production systems. Your work will directly contribute to advancing our technology in a fast-paced and supportive environment. We value innovative and creative ideas-yes, even during meetings (where snacks are always welcome). If you enjoy tackling challenges with positivity and a bit of humor, you'll feel right at home here. What You'll Be Doing: Set up test equipment and test articles safely and efficiently. Troubleshoot, repair, and calibrate test equipment to ensure accuracy and reliability. Collaborate with engineering teams to align test capabilities with evolving program needs. Assist in designing, building, and documenting new test equipment and procedures. Support prototype system builds to meet design specifications and deadlines. Diagnose and resolve issues with batteries, fuel cells, and related systems. What We're Looking For: 2+ years of hands-on experience in electro-mechanical roles (e.g., build/repair, debugging, and system setup). Technical training via apprenticeship, trade school, or college program. Proficiency with computers and standard software such as MS Office; familiarity with data collection and analysis tools. What Sets You Apart: Experience handling high-voltage/high-current equipment safely. Ability to read and interpret technical documentation, including electrical and mechanical schematics. A knack for building and troubleshooting complex systems-mechanical, electrical, or both. Where and When You'll Work: This is an in-person role located at our Rochester, New York office-ideal for those who thrive in a hands-on, team-oriented environment. What Your Total Compensation & Benefits Package will look like: Wage - $27.52 - $35.29 per hour. Compensation depends on the selected candidate's education and experience. Relocation: This role may be eligible for relocation assistance. World Class Benefits: Competitive Salary Performance Bonus Generous Paid Time Off and 13 Paid Holidays Affordable Medical plans and no-cost Dental & Vision options 100% 401(k) match up to 6% Company-Paid Life Insurance, Short-Term Disability, and Long-Term Disability Tuition Assistance Program Employee Assistance Program (EAP) with access to mental health care, legal support, and financial guidance Recognition and Kaizen (continuous improvement) Reward Programs Meaningful opportunities for personal and professional development Best in class work culture! Big Name | Big Opportunities | Life is Better at Toyota Toyota Material Handling North America (TMHNA), the industry leader in forklift sales, comprises two main brands: Toyota Material Handling and The Raymond Corporation. We believe investing in the best people, products, and processes will fuel our future success, and we will always be driven by our foundational principles of “respect for people” and “continuous improvement”. With opportunities across North America, we are confident you will find the right position within TMHNA that can help you build a long, fulfilling career. Learn more here: https://www.toyotaforklift.com/careers Follow us on Social Media: Working at Toyota Material Handling | Glassdoor

Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

About the Role This team member will play a critical role within our MEP team, leading electrical system designs, performing power distribution analysis, selecting equipment, and managing the preparation of engineering documents. The role involves collaborating with senior engineers, mentoring junior staff, and ensuring compliance with industry standards, energy codes, and best practices for power, lighting, and low-voltage building systems. Responsibilities include: Lead and oversee the design of electrical systems for commercial, institutional, and industrial buildings. Perform load calculations, short-circuit analysis, and voltage drop calculations for system design. Select and specify electrical distribution equipment, lighting systems, and controls. Utilize AutoCAD and Revit to develop and refine electrical design layouts and construction drawings. Research and ensure compliance with building codes, NFPA, NEC, and energy efficiency standards. Manage projects independently or alongside senior engineers, ensuring deadlines and budgets are met. Mentor junior engineers and technicians, providing technical guidance and knowledge-sharing. Assist in client communications, site visits, and coordination with multidisciplinary teams. Prepare technical reports, engineering specifications, and cost estimates. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: Binghamton, NY Horseheads, NY Rochester, NY Towanda, PA Williamsport, PA Qualifications 5-9 years of experience in electrical engineering, power distribution, or a related field. Bachelors degree in electrical engineering preferred. Proficiency in AutoCAD, Revit, and electrical design software for system analysis. Strong leadership, verbal, and written communication skills, with the ability to collaborate across teams. In-depth knowledge of power distribution, lighting, and low voltage building systems. Holds an Engineer-in-Training (EIT) certification or is working toward a Professional Engineer (PE) license. Benefits Holidays PTO Health Insurance FSA/ HSA Life Insurance 401(K) plan Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.