Engineering technician jobs in Rock Hill, SC - 439 jobs

Job Title: QC Environmental Monitoring Technician Department: Quality Control Pay: $25-$30/hr The QC Environmental Monitoring Technician supports parenteral manufacturing operations by performing routine environmental monitoring of classified manufacturing areas and conducting clean utility sampling and analysis across manufacturing and QC laboratory facilities. This role is essential in ensuring compliance with cGMP requirements and maintaining a controlled manufacturing environment to support the production of safe, high-quality pharmaceutical products. Key Responsibilities Adhere to and promote compliance with cGMP regulations, Quality Systems, and Good Documentation Practices (GDP). Perform routine environmental monitoring of classified manufacturing areas in support of both routine operations and Environmental Monitoring Performance Qualification (EMPQ) activities. Conduct clean utility sampling and analysis, including: Compressed air Potable water Purified water Water for Injection (WFI) Clean steam Support manufacturing and QC laboratory operations by providing accurate and timely environmental monitoring data. Enumerate, review, and document environmental monitoring results using LIMS or other laboratory data systems. Perform Second Person Verification (SPV) of environmental monitoring data on a routine basis. Participate in continuous improvement initiatives and quality-focused projects. Assist in the development, revision, and maintenance of SOPs and Work Instructions as needed. Adhere to and promote compliance with all site safety policies and procedures. Minimum Qualifications High School Diploma or equivalent required; Associate degree preferred. Minimum of 2 years of experience performing Environmental Monitoring in a GMP-regulated pharmaceutical manufacturing environment. Prior experience supporting aseptic or parenteral manufacturing operations strongly preferred. Hands-on experience with environmental monitoring techniques, including: Viable surface monitoring Viable air monitoring Non-viable air monitoring Compressed air sampling Water and clean utility sampling and analysis Experience working with laboratory systems such as LIMS, LES, and/or MODA. Preferred Qualifications Strong understanding of cGMP regulations and regulatory compliance expectations. Experience performing environmental monitoring within filling isolators or Restricted Access Barrier Systems (RABS). Ability to train and mentor junior Environmental Monitoring Technicians. Strong written and verbal communication skills. Proven ability to collaborate effectively in a cross-functional team environment. Physical & Work Environment Requirements Ability to work in laboratory and cleanroom environments while wearing appropriate PPE. Ability to gown into facility-specific cleanroom attire. Ability to stand or walk for extended periods and perform repetitive tasks. Ability to lift, push, pull, and carry up to 30 pounds. Work Schedule & Travel Ability to work 12-hour shifts. Flexibility to work day or night shifts, particularly during training and startup phases. This role may initially support project/startup activities and transition into a routine operational support position.

Role: Slalom Flex (Project Based) - Technical Engineer (Pega) Who You'll Work With Our teams help organizations of all kinds redefine what's possible, give shape to the future - and get there. We focus on high-impact projects, meeting our clients where they are to uncover business needs and deliver results. Our teams go beyond the expected to help clients move confidently through ambiguity and risk and drive more transformative outcomes. The Technical Engineer with strong Pega expertise will focus on designing, building, and optimizing enterprise workflows on the Pega Platform, ensuring high performance, security, and scalability. What You'll Do * Design and Build: Develop case types, flows, UI rules, and data models on Pega Platform (v7.x / v8.x). * Integrations: Implement and troubleshoot integrations (REST, SOAP, APIs, MQ, databases). * Performance & Security: Conduct performance tuning and enforce security/access control best practices. * Collaboration: Work within Agile/Scrum teams, partnering with business analysts, QA, and DevOps. * Consulting Excellence: Translate business requirements into technical solutions and provide clear recommendations to stakeholders. What You'll Bring * Strong expertise in Pega Platform (v7.x / v8.x). * Proven experience as a Technical or Lead Pega Architect on large-scale implementations. * Deep understanding of: * Case Management, Flows, and UI rules * Data modeling and decisioning * Pega performance tuning and optimization * Security and access control * Hands-on experience with integrations (REST, SOAP, APIs, MQ, databases). * Experience with Agile/Scrum methodologies. * Experience with Pega migrations and upgrades. * Pega certifications such as: * Pega Certified Lead System Architect (CLSA) * Pega Certified Senior System Architect (CSSA) * Familiarity with cloud platforms (AWS, Azure, or GCP). * Exposure to DevOps tools and CI/CD pipelines. * Experience in regulated industries (Financial Services, Healthcare, Insurance). * Consulting experience. About Us Slalom is a fiercely human business and technology consulting company that leads with outcomes to bring more value, in all ways, always. From strategy through delivery, our agile teams across 52 offices in 12 countries collaborate with clients to bring powerful customer experiences, innovative ways of working, and new products and services to life. We are trusted by leaders across the Global 1000, many successful enterprise and mid-market companies, and 500+ public sector organizations to improve operations, drive growth, and create value. At Slalom, we believe that together, we can move faster, dream bigger, and build better tomorrows for all. Compensation and Benefits Slalom prides itself on helping team members thrive in their work and life. As a result, Slalom is proud to invest in benefits that include meaningful time off and paid holidays, parental leave, 401(k) with a match, a range of choices for highly subsidized health, dental, & vision coverage, adoption and fertility assistance, and short/long-term disability. We also offer yearly $350 reimbursement account for any well-being-related expenses, as well as discounted home, auto, and pet insurance. Slalom is committed to fair and equitable compensation practices. For this position, the hourly pay range is $65 to $90/HR depending on experience. Actual compensation will depend upon an individual's skills, experience, qualifications, location, and other relevant factors. The hourly pay range is subject to change and may be modified at any time. EEO and Accommodations Slalom is an equal-opportunity employer and is committed to attracting, developing and retaining highly qualified talent who empower our innovative teams through unique perspectives and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans' status, or any other characteristic protected by federal, state, or local laws. Slalom will also consider qualified applications with criminal histories, consistent with legal requirements. Slalom welcomes and encourages applications from individuals with disabilities. Reasonable accommodations are available for candidates during all aspects of the selection process. Please advise the talent acquisition team if you require accommodations during the interview process. We will accept applications on an ongoing basis through January 23, 2026

Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technician Aides to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materials-including soil, concrete, and masonry-in accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance with project specifications and documenting field results accurately and clearly. The position requires physical stamina, attention to safety protocols, reliable transportation, and the ability to obtain industry certifications such as ACI, ICC, and OSHA. Successful candidates will demonstrate a commitment to quality, safety, and professionalism while working in dynamic construction environments. Requirements Education: Engineering technicians must have a high school diploma or the GED high school equivalency credential. Certification: Engineering technicians will obtain and maintain relevant ACI, ICC, and OSHA certifications, as well as other certifications as deemed appropriate by their supervisor. Pre-employment Requirements: Drug Testing: All job applicants will undergo testing for the presence of illegal drugs as a condition of employment. All employees will follow Geo-Hydro Engineers' Drug Free Workplace Substance Abuse Policy. Driving Record: Engineering technicians will have a valid driver's license with no violations that prevent them from being insured through the company's insurance carrier. The ability to be insured is at the discretion of the company's insurance carrier. The insurance carrier routinely reviews employee's driving records and may determine at any time than any employee will no longer be permitted to operate any company vehicle. Job Responsibilities and Requirements: Observation: Engineering technicians must be able to observe construction work for compliance with applicable project drawings and specifications, and for general accordance with International Building Code requirements. Testing: Engineering technicians must be able to perform field and laboratory testing of soil, stone, concrete, grout, masonry, and other construction materials in accordance with ASTM standards. Applicable ASTM standards include but are not limited to the following: D-698, D-1557, D-1556, D-2937, D-2216, D-6938, C-31, C-143, C-173, C-231, and ASTM STP 399. Documentation: Engineering technicians document field observations and test results by writing legibly in English with proper grammar. Basic mathematics (addition, subtraction, multiplication, and division) is an integral part of all testing and reporting. Safety: Engineering Technicians must wear appropriate personal protection equipment (PPE), attend safety training sessions, and follow the requirements within the Geo-Hydro Safety and Health Manual. Physical Requirements Lifting: Must be able to lift, load and unload soil, sand, asphalt, CMU, and concrete samples weighing up to 100 pounds. Concrete Sampling and Testing: Must be able to maneuver a 6-cubic foot wheelbarrow loaded with 150-200 pounds of fresh concrete for up to 50 yards over uneven ground. Unit weight testing requires lifting a 50-pound container of concrete. Six-inch compressive strength test cylinders weigh 30 pounds each. Volumetric air content testing requires repeated swinging of the 30-pound concrete-filled test device from knee-level to head-level. Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel. Must be able to load and unload a 90-pound case containing a nuclear density gauge and carry the 50-pound nuclear density gauge by hand for up to 50 yards over uneven ground. Hand Auger and Penetrometer: Must be able to manually hand auger down to 10 feet into soil to obtain samples and perform portable dynamic cone penetrometer testing. The hand auger may require up to 50 pounds of pull to remove it from wet soil conditions. The total weight of the dynamic cone penetrometer ranges from 20 to 40 pounds. Operation of the penetrometer requires repeated raising and dropping of the 15 pound slide weight.

JOB TITLE: ENGINEER TECH DEPARTMENT: ENGINEERING REPORTS TO: CHIEF ENGINEER/OPERATIONS MANAGER JOB TYPE: FULL AND PART-TIME POSITIONS AVAILABLE Summary: As an Engineer Tech for the Hotel Division of Summit Hospitality Group, you hold an essential position responsible for performing a variety of work in the maintenance and repair of the hotel's facilities, and equipment. Will promote a safe working environment and quality of service to achieve maximum guest satisfaction. The Engineer Tech will work with managers, inspectors, and department heads to ensure maximum efficiency and safety and shall strive to always provide service to both internal and external guests. Qualifications: 1-2 years of experience with name brand hotel Engineer experience preferred Can-do attitude and willingness to jump-in and do the assigned work in a cheerful and respectful manner Service oriented style with professional presentation High energy and attention to detail Teamwork and partnership attitude towards fellow associates and management Requirements: Responsibilities: Ensures complete guest satisfaction. Treats guest in friendly and helpful manner. Assists with preventative maintenance and completing work orders such as replacing ceiling tiles, light bulbs, patching vinyl, etc. to maintain the hotel and keep the product quality to standard. Performs other preventative maintenance assignments on a scheduled basis such as “room care”. Services the hotel's pool, including adjusting chemicals and cleaning filters, completing maintenance request forms and record logs. Assists in checking and making minor repairs on general plumbing systems and fixtures such as pipelines, toilets and sinks, kitchen and laundry equipment. Responds in a courteous manner to all guest questions, complaints, and or requests to ensure strong guest satisfaction. Must be able to recognize potential safety hazards and security problems in the hotel and act upon each, accordingly; be willing and able to comply with hotel policies and procedures including appearance and grooming, safety, security, key control and emergency procedures. Must have some knowledge associated with HVAC, boilers, electrical, carpentry, dry walling, painting, plumbing, roofing, and landscaping. Must be able to troubleshoot and repair routine mechanical and electrical malfunctions in hotel systems and equipment. Must be willing and able to be responsive to complaints and maintenance and be willing and able to “pitch-in” and help co-workers with their job duties and be a team player. Maintains all franchise standards and follow-up on inspection deficiencies. Investigates guest complaints. Assists in conducting the departmental operational audits and assists in developing corrective action plans. Practices the “Summit Hospitality Culture” and ensures all cultural expectations are implemented and regularly practiced. Supports hotel's training needs and efforts. Duties are subject to change and additional responsibilities/tasks may be assigned as needed. Work Environment: Flexible work schedule including availability on weekends Must have reliable source of transportation Must be able to stand up and move about the facility for the majority of shift Must be able to occasionally lift, carry, push & pull up to 50 lbs Must be able to perform simple grasping, fine manipulation, and repetitive hand & arm movements frequently, and squeezing & overhead reaching occasionally Must be able to bend, squat, crawl, kneel, push, pull, walk on uneven surfaces on a frequent basis Must be able to frequently handle objects and equipment to maintain the facility The physical demands described here are representative of those that must be met by associate to successfully perform the essential functions of this job. Must have the ability to obtain and/or maintain any government required licenses, certificates, or permits Benefits: Fulltime Employees Personal time after 90-days Insurance benefits after 90-days Vacation Time Summit Hospitality Group is an Equal Opportunity Employer. Summit Hospitality Group LTD. and its affiliates provide equal employment opportunities to all applicants without regard to an applicant's race, color, sex, religion, disability, national origin, citizenship, veteran status, genetic information, sexual orientation or gender identity, or on the basis of age with respect to persons 18 years or older.

Engineering Technologist Asheville, NC We are in search of an Engineering Technologist to join our diverse and fast-paced organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in performing field inspections, engineering design work and calculations. As a part of this work, you'll be coordinating with permit agencies, right-of-way specialists, system owners, field leaders, forestry leaders, and 3rd party owners for joint-owned poles. Additionally, you will provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met, as well as conducting root cause analysis of outages and mitigation using engineering principles and design. You'll engage with technical design and Client standards, ensuring quality and timeliness of design deliverables to QAQC. Responsibilities will include: Review work provided by Client and assess requirements of scopes. Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met. Conduct root cause analysis of outages and mitigation using engineering principles and design. Travel to sites as needed, perform inspections and return to the office to perform engineering design work; about 80% of your time will be spent traveling locally and regionally, collecting field data that will assist in the development of electrical design work packages Background Requirements: High School diploma or equivalent is required; Associates Degree or higher in engineering technology or related is preferred Willingness to perform both field and office work Written and verbal communication skills Ability to work in outdoor environments, as some field work could be required Proficiency in MS Office (Word, Excel, Outlook, etc.) Power/Utilities experience is preferred Previous experience with field data collection is preferred This role requires a valid US driver's license as local and regional travel is required Professional Attributes that will help you succeed in this role: Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations. Ability to work with limited supervision Positive attitude Professional dress and demeanor

NV5 (NYSE: TIC) provides engineering and consulting services to public and private sectors, delivering solutions through five business verticals: Construction Quality Assurance, Infrastructure, Utility Services, Program Management, and Environmental. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives . NV5 is seeking an Engineering Technician for our Charlotte, NC location. This role is also open to those in Fayetteville, NC; Rocky Mount, NC; and Burlington, NC. Responsibilities include monitoring activities on construction sites and performing testing of soils, concrete, and asphalt pavement materials. A company truck, phone, and safety equipment will be provided at our office. Responsibilities Performs In-Place Density Tests using nuclear density gauge, drive sleeve, or sand cone method. Aggregate Sampling. Concrete/Grout/Masonry sampling (including: air content; slump testing; visual observations; casting samples of concrete cylinders, mortar cubes, and grout prisms; and obtaining core samples). Also may perform asphalt sampling, backscatter tests, and coring. Qualifications Will train employees without work experience; but prefer that candidates have at least some construction-related work history. Qualified candidates should have basic math and writing skills. Strong work ethics Ability to work as a team player. Offer is contingent on background report Work environment and physical demands of this position This position will be subject to outside environmental conditions, including weather conditions such as wet and /or humid environments, extreme cold and/or heat, dusty and noisy work environments. Work will primarily be in the field involving long-term standing and frequent walking as well as include common hazards at construction and project sites. Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally. Must be able to walk over rough and uneven terrain and be able to stand up to 10 hours a day on occasion. Must have the ability to see, smell, hear, talk, climb, balance, stoop, kneel and twist, crouch, crawl, reach, grasp, sit, stand, and walk. Weekend and overtime work and/or overnight work and travel may be required. Additional physical duties may be required, as necessary. #LI-HH1 #NV5earlycareers NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

NV5 (NYSE: TIC) provides engineering and consulting services to public and private sectors, delivering solutions through five business verticals: Construction Quality Assurance, Infrastructure, Utility Services, Program Management, and Environmental. With offices nationwide and abroad, NV5 helps clients plan, design, build, test, certify, and operate projects that improve the communities where we live and work. As engineers, architects, construction/program managers, environmental professionals and beyond, we play a significant role in shaping our communities through the services we provide. We are looking for passionate, driven individuals to join our team focused on Delivering Solutions and Improving Lives. NV5 is seeking an Engineering Technician for our Charlotte, NC location. This role is also open to those in Fayetteville, NC; Rocky Mount, NC; and Burlington, NC. Responsibilities include monitoring activities on construction sites and performing testing of soils, concrete, and asphalt pavement materials. A company truck, phone, and safety equipment will be provided at our office. Responsibilities * Performs In-Place Density Tests using nuclear density gauge, drive sleeve, or sand cone method. * Aggregate Sampling. Concrete/Grout/Masonry sampling (including: air content; slump testing; visual observations; casting samples of concrete cylinders, mortar cubes, and grout prisms; and obtaining core samples). * Also may perform asphalt sampling, backscatter tests, and coring. Qualifications * Will train employees without work experience; but prefer that candidates have at least some construction-related work history. * Qualified candidates should have basic math and writing skills. * Strong work ethics * Ability to work as a team player. * Offer is contingent on background report Work environment and physical demands of this position * This position will be subject to outside environmental conditions, including weather conditions such as wet and /or humid environments, extreme cold and/or heat, dusty and noisy work environments. * Work will primarily be in the field involving long-term standing and frequent walking as well as include common hazards at construction and project sites. * Must be able to carry, lift and push/pull up to 50 pounds frequently and up to 100 pounds occasionally. * Must be able to walk over rough and uneven terrain and be able to stand up to 10 hours a day on occasion. * Must have the ability to see, smell, hear, talk, climb, balance, stoop, kneel and twist, crouch, crawl, reach, grasp, sit, stand, and walk. * Weekend and overtime work and/or overnight work and travel may be required. * Additional physical duties may be required, as necessary. #LI-HH1 #NV5earlycareers NV5 offers a competitive compensation and benefits package including medical, dental, life insurance, PTO, 401(k) and professional development/advancement opportunities. NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is seeking a technically driven and detail-oriented engineer to support and optimize our melting and remelting operations for high-performance alloys, including nickel, cobalt, and specialty steels. This role serves as a key technical contact for both internal teams and customers, driving process excellence across VIM, ESR, and VAR operations. The ideal candidate will lead continuous improvement initiatives, maintain process controls, and collaborate with cross-functional teams to enhance safety, quality, and efficiency. From troubleshooting non-conformances to advancing process capabilities through data analysis and trials, this position plays a critical role in ensuring ATI's materials meet the demanding standards of our global customers. We are hiring for multiple skill levels and will provide relocation. Essential Functions (other duties may be assigned) Internal/external technical contact for complete melting and remelting process for nickel base, cobalt base, and specialty steel alloys. This includes raw materials, vacuum induction melting (VIM), electroslag remelting (ESR), and vacuum arc remelting (VAR). Provide support for formulation, conditioning, and preparatory operations. Maintenance and standardization of operating instructions, mill instructions, and related equipment recipes. Establish, monitor, and maintain statistical process control (SPC) limits for key products and processes within the melt and remelt departments. Provide technical support in resolving process-related non-conformances and customer complaints. Lead or participate in customer audits of ATI manufacturing facilities and supplier facilities. Develop an understanding of melting/remelting equipment capabilities and applications as well as evaluate impact of melt parameter changes/process improvements. Develop an understanding of various alloys and their specific melt related characteristics and behaviors. Collaborate with Operations and Maintenance personnel to develop improvements to manufacturing processes and standards that enhance safety in the workplace, equipment performance, and product quality. Plan, execute and manage product/process continuous improvement programs that support several value streams using Plan-Do-Check-Act approach. Utilize statistical data analysis, process modeling, and sub/full-scale trials to support initiatives. Lead or participate in team-based continuous improvement activities including risk assessments (RAA), problem solving reports (PSR), process audits, and standard work. Timely communication of results to management, operations, colleagues, and customers in the form of written reports and oral presentations. Support internal/external customers by analyzing process data, chemistry data, and non-destructive testing data.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is seeking a technically driven and detail-oriented engineer to support and optimize our melting and remelting operations for high-performance alloys, including nickel, cobalt, and specialty steels. This role serves as a key technical contact for both internal teams and customers, driving process excellence across VIM, ESR, and VAR operations. The ideal candidate will lead continuous improvement initiatives, maintain process controls, and collaborate with cross-functional teams to enhance safety, quality, and efficiency. From troubleshooting non-conformances to advancing process capabilities through data analysis and trials, this position plays a critical role in ensuring ATI's materials meet the demanding standards of our global customers. We are hiring for multiple skill levels and will provide relocation. Essential Functions (other duties may be assigned) Internal/external technical contact for complete melting and remelting process for nickel base, cobalt base, and specialty steel alloys. This includes raw materials, vacuum induction melting (VIM), electroslag remelting (ESR), and vacuum arc remelting (VAR). Provide support for formulation, conditioning, and preparatory operations. Maintenance and standardization of operating instructions, mill instructions, and related equipment recipes. Establish, monitor, and maintain statistical process control (SPC) limits for key products and processes within the melt and remelt departments. Provide technical support in resolving process-related non-conformances and customer complaints. Lead or participate in customer audits of ATI manufacturing facilities and supplier facilities. Develop an understanding of melting/remelting equipment capabilities and applications as well as evaluate impact of melt parameter changes/process improvements. Develop an understanding of various alloys and their specific melt related characteristics and behaviors. Collaborate with Operations and Maintenance personnel to develop improvements to manufacturing processes and standards that enhance safety in the workplace, equipment performance, and product quality. Plan, execute and manage product/process continuous improvement programs that support several value streams using Plan-Do-Check-Act approach. Utilize statistical data analysis, process modeling, and sub/full-scale trials to support initiatives. Lead or participate in team-based continuous improvement activities including risk assessments (RAA), problem solving reports (PSR), process audits, and standard work. Timely communication of results to management, operations, colleagues, and customers in the form of written reports and oral presentations. Support internal/external customers by analyzing process data, chemistry data, and non-destructive testing data.

Job Title: Engineering Technician Department: Engineering Reports To: Engineering Manager We're looking for a hands-on, mechanically inclined individual to join our team as an Engineering Technician - Implementation. This role serves as the critical link between the Engineering team and the shop floor, helping bring new designs and continuous improvement projects to life. From assembling custom fixtures to installing them in production, you'll play a key role in turning ideas into real-world solutions. Key Responsibilities: Assemble new fixtures, jigs, and tooling based on engineering designs Work from 2D prints and 3D CAD models to understand and execute builds Perform MIG welding on steel components as required Use hand tools, drills, presses, grinders, taps, and other equipment to fabricate and assemble parts Operate or learn to operate forklifts and overhead cranes to move materials and equipment Run test pieces on new fixtures to verify proper function before full implementation Work independently in the Fab Lab to support new projects and CI (continuous improvement) initiatives Collaborate closely with engineers to ensure projects meet safety, quality, and efficiency goals Support the implementation of new tools and fixtures on the production floor Required Skills and Qualifications: MIG welding ability Ability to read 2D engineering drawings and visualize 3D designs Strong problem-solving skills and mechanical aptitude Ability to use common hand tools and basic shop equipment Interest in learning to drive a forklift and operate an overhead crane Comfortable working on custom, one-off projects (not repetitive production work) Self-motivated with the ability to manage time and tasks with minimal supervision Why This Role Exists: This position was created to fill a growing gap between Engineering and Maintenance. With an increasing number of new fixtures, jigs, and CI projects, our current maintenance team is stretched too thin to keep up. This role ensures critical projects don't get delayed due to other shop priorities. You'll take ownership of building and implementing new equipment-ensuring it's done right, on time, and ready for production.

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Engineering Technician needs Vocational and/or diploma in an engineering field • 1-3 years in engineering information systems and/or engineering services Engineering Technician requires: Management and operation of rapid prototyping processes (Stratasys Objet and FDM) • Working knowledge of various software and business operating systems such as: o ECR/ECO workflows (WorkflowGen, WindChill, Enovia a plus) o Product Data Management (Autodesk Vault, PTC WindChill, Enovia a plus) o CAD Administration (Autodesk Inventor, PTC Creo, Solidworks a plus) o ERP software (BAAN, SAP) a plus Engineering Technician duties: Reviewing drawings in the release cycle for proper notation, revision and format (non-technical content) Approving the release of drawings and entering them into the PDM/repository system • Entering BOM and release information into the ERP system (data entry) • Additional Information $26/hr 6 months

Under the direction of engineering staff, supports all phases of the manufacturing process, including the setup, operation, testing, and maintenance of rubber molding equipment, tools, and machinery. Assists in process development and troubleshooting, participates in engineering trials, and provides operator training to ensure safe, efficient, and reliable production. Job Duties Perform work associated with automation improvements, new plant layouts, installation, calibration and operation of production machines Set up, adjust and operate machinery in support of the production process, as needed Test and inspect machines to determine safe and efficient operation, perform routine maintenance and fix standard malfunctions Read and interpret blueprints, engineering specifications and shop order to determine machine setup, production methods and sequence of operation Devise, fabricate and assemble new or modified mechanical components for products, such as machinery or equipment and measuring instruments Complete all necessary documents fully and accurately Adhere to 5S standards (e.g., maintain cleanliness of work area, etc.) Follow all Safety, Environmental and Quality policies and procedures Perform other duties as assigned Experience and Education Perform work under direct supervision Handle basic issues and problems and refer more complex issues to higher level staff Possess beginning to working knowledge of rubber injection molding Require accreditation from a technical school or applicable skilled trades program and 0 to 2 years of experience Proficient in Microsoft Office applications (Outlook, Word, and Excel) for communication, documentation, and data analysis. Competencies/ Skills Ability to interpret work instructions Ability to follow written and verbal directions Intermediate verbal and written communication skills Ability to meet deadlines Ability to work independently as well as part of a team Interpersonal skills Critical Thinking and Problem-solving skills Analytical thinking skills Process troubleshooting Mechanical aptitude Hands-on assembly and repair Essential Functions - Environment, Competencies, and EquipmentChoose the appropriate response by each of the functions listed below Physical Requirements Environmental Factors Competencies/Skills Equipment Use Yes General vision Yes Works alone Yes Reading simple Yes Computer No Close vision Yes Works with others No Reading complex No Telephone Yes Clear Speech Yes Verbal face-to-face Yes Writing simple Yes Calculator Yes Hearing Yes Extended days No Writing complex Yes Copy machine Yes Hand/ finger dexterity Yes Weekend work Yes Perceive/comprehend No Fax No Flexibility (upper/lower) Yes Mechanical equipment Yes Math skills simple Yes Maintenance tools F Standing No Electrical equipment No Math skills complex Yes Process machines O Sitting No Pressurized equipment Yes Judgement calls No Packaging machines R Kneeling No Burning materials Yes Decision making Yes Lab equipment R Stooping No Varying temperatures Yes Good communication written Yes Measuring Devices O Bending No High places Yes Good communication verbal No Automobile R Lifting No Fumes/odors Yes Ability to lead No Powered industrial equipment 30lb Lifting, pulling, pushing Yes Dirt/dust Yes Team work R Pulling No Gases Yes Problem solving R Pushing Yes Noise/vibration Yes Creativity Key: C - Continuous, F - Frequently, O - Occasionally, R - Rarely

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Engineering Technician - Day Shift Organization Overview At Lilly, we unite caring with discovery to make life better for people around the world. Headquartered in Indianapolis, Indiana, we are a global leader in healthcare, committed to discovering life-changing medicines, advancing disease management, and supporting our communities through philanthropy and volunteerism. We put people first and strive to make a meaningful impact every day. Position Summary The Engineering Technician at our Concord, NC facility plays a key role in supporting Parenteral Operations, our customer, by ensuring the efficient setup and operation of Pre-Filled Syringe and Isolator Equipment. This position requires hands-on engineering maintenance expertise to assist with equipment setup, operational support, troubleshooting, repairs, and ongoing maintenance. The ideal candidate will demonstrate a strong understanding of customer needs, collaborate effectively with internal teams, and provide responsive, courteous support. Success in this role requires technical proficiency, problem-solving skills, and a commitment to delivering excellent customer service in a dynamic manufacturing environment. Key Responsibilities Promote a safety-first, quality-always culture in all tasks and interactions Improve equipment uptime, line efficiency, and overall equipment effectiveness (OEE) Perform condition monitoring, troubleshooting, and provide operational support Diagnose and repair precision filling equipment with strong mechanical aptitude Collaborate with engineering and production teams to resolve equipment issues promptly Assist with equipment setup and changeovers to support production needs Adhere to all GMP and quality standards Must have the ability to quickly and accurately diagnose the root cause of a problem and properly implement corrective actions to minimize downtime Accurately document maintenance activities and corrective actions Support cross-functional tasks and assist outside primary responsibilities as needed Work independently and manage priorities under pressure Basic Requirements High school diploma or GED Minimum of 5 years' experience in production maintenance Preferred Qualifications Strong mechanical aptitude and hands-on technical skills Proficient with basic hand tools Detail-oriented with a commitment to quality and precision Familiarity with safety protocols and proper PPE usage Physically able to stand for extended periods Effective team player with strong interpersonal skills Associate's degree or technical certification in a related field is a plus Knowledge of FDA and GMP regulations Experience operating high-speed, automated production equipment, preferably Syringe/Vial Filling systems utilizing Isolator technology Ability to quickly learn and apply new procedures Experience working in a classified manufacturing environment Familiarity with Computerized Maintenance Management Systems (CMMS) platforms Strong verbal and written communication skills Customer-oriented mindset with a proactive approach Analytical thinker with strong problem-solving abilities Additional Information Flexibility to work overtime or adjust schedule based on production demands Following a Monday-Friday, 8-hour training period, the role transitions to a 12-hour 2-2-3-day shift schedule Willing and able to respond to off-hour emergencies as needed Open to travel for training and professional development opportunities Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $21.27 - $41.25 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Agency Adult Correction Division Job Classification Title Electronics Technician I (S) Number Grade NC09 About Us NC Department of Adult Correction is one of the largest state agencies with more than 19,000 employees. It is responsible for safeguarding and preserving the lives and property of its citizens through prevention, protection, and preparation as well as the care, custody, and supervision of all adults sentenced after conviction for violating North Carolina laws. This department includes State Prisons with custody, healthcare, and facility operations staff as well as the division of Community Supervision. Other divisions include Administration, Compliance & Accreditation, Comprehensive Health Services, Internal Affairs & Intelligence Operations, Post-Release Supervision & Parole Commission, and Rehabilitation & Reentry. We have a mission that matters! Description of Work This is skilled work in the repair and maintenance of standard and custom electronics devices, electronics subsystems, and smaller electronics systems. Positions may either function as agency or department-wide technicians responsible for the maintenance and repair of electronics devices, subsystems, or smaller systems; or involved in the same type of repair independently but under the general supervision of a higher level electronics technician. Positions calibrate, perform preventive maintenance, troubleshoot, and repair electronics devices or systems made up of several interconnected devices where this interconnection complicates troubleshooting and repair procedures. Documentation in the form of schematic diagrams, wiring diagrams, and repair manuals exist in many instances but may be fragmented or nonexistent in others. Positions may modify existing circuitry to improve performance or affect output or lay out circuitry to provide for special functions such as the interfacing of individual devices into systems. Reliance on existing types of circuits and circuit designs is common. Work is evaluated through analysis of reliability of electronic repair and workability of designs and circuit modifications. Knowledge Skills and Abilities/Management Preferences Working knowledge of electronic principles. Working knowledge of the fundamentals of physics as applied to electronics. Working knowledge of mathematical principles as applied to electronic circuit analysis. Working knowledge of the uses of standard and specialized electronic testing equipment. Ability to analyze and modify standard circuitry to improve its performance or to perform special effects. This position requires the daily commute to the Piedmont Regional Maintenance Yard in Asheboro, NC. This is a full-time position (40 hours per week) with State Benefits. The work schedule is Monday - Friday and may require some weekend work and overnight travel to meet the demands of the organization. If you desire a financially rewarding career that includes great work / life balance and is coupled with strong state benefits including retirement, health insurance, vacation leave, sick leave, and paid holidays, please apply today! Electronics Technician II This is highly skilled work in the maintenance and repair of complex electronic systems or developmental work in the modification, design and installation of electronic devices and systems. Positions design and construct specialized one-of-a-kind electronic devices. Design work is differentiated from that of the Electronics Technician I level by less reliance on standard circuitry and modification to it, and more reliance on the utilization and modification of standard circuitry to perform special, new or unusual functions. Positions in this class may consult with faculty members desiring the construction of electronic teaching or research devices to determine project parameters. Maintenance and repair are performed on devices designed and on electronic systems where troubleshooting difficulties are compounded by individual, complex devices which are interconnected. Documentation in the form of schematic diagrams, wring diagrams, or repair manuals is often fragmented or non-existent. Work is evaluated through the effectiveness of projects designed and constructed, and analysis of equipment reliability. Electronics Technician III This is supervisory and or specialized work in the repair and maintenance of highly complex electronics systems, and the design and modification of complex electronic devices which interface with systems. Some roles may specialize in the installation, maintenance, and operation of radio equipment in a statewide communications system. Positions directly supervise journeyman level technicians in resolving moderate to highly complex tasks. Work involves project management, workload distribution, and associated supervisory responsibilities to ensure work is completed timely and accurately. Positions also perform calibration, preventive maintenance, troubleshooting, and repair of the most complex or novel electronics systems and devices. Electronics device work usually involves the design and testing of prototypes that perform novel and innovative functions. Unique circuit design is common at this level. Positions have ultimate responsibility for ensuring systems and devices are functioning properly on a statewide or large regional level. Errors in project management could result in inoperable systems that negatively impact agency operations or create significant public safety concerns. Salary Range per Classifications - Electronics Technician I $39,671.00 - $69,426.00 Electronics Technician II $ 43,738.00 - $ 76,542.00 Electronics Technician III $ 48,222.00 - $ 84,388.00 Minimum Education and Experience Some state job postings say you can qualify by an “equivalent combination of education and experience.” If that language appears below, then you may qualify through EITHER years of education OR years of directly related experience, OR a combination of both. See the Education and Experience Equivalency Guide for details. Associate's degree in electronics from an appropriately accredited institution and one year of experience in the repair and maintenance of a variety of specialized electronic devices, preferably including some responsibility for circuit modification; or an equivalent combination of training and experience. Based on the nature of work performed, may require appropriate licensure by the governing board or commission. EEO Statement The State of North Carolina is an Equal Employment Opportunity Employer and dedicated to providing employees with a work environment free from all forms of unlawful employment discrimination, harassment, or retaliation. The state provides reasonable accommodation to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for religious beliefs, observances, and practices. Recruiter: Monica Malone Email: *********************

JOB SUMMARY: Under general supervision, the Electronics Technician will oversee the functionality of a multitude of operating systems, i. e. fire, security, within school buildings.

Job Status/Type: Full time Level I Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Responsible for inspecting, installing, troubleshooting, and repairing electrical components, alarm systems, light systems, building electrical systems, and sound systems Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Electronics Technicians install and maintain telephone systems, radio communication systems, communications lines, including the ride PA systems and speakers and wiring for park area sound, various digital and microprocessor controlled devices, video surveillance systems, and electronic shooting galleries, if any; repair, overhaul, troubleshoot, modify, fabricate, and test various types of electronic equipment and related devices, such as animatronic controls and park lighting systems; troubleshoot those systems and all electronic wiring circuits; take test readings; and use tools and common test instruments in the course of those tasks. Adheres to and enforces all Carowinds and specific Park policies and procedures, including safety, attendance and EEO policies, and demonstrates commitment to customer service in all aspects of employment Qualifications: Knowledge, Skills & Abilities: Basic knowledge of electronics installation and maintenance, including sound system installation and setup, lighting hanging, cable dressing, and animatronic controls Education: High School Diploma or GED License or Certification: Electronics Technician Certification Experience: Less than 1 year of experience. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

JOB TITLE: ENGINEER TECH DEPARTMENT: ENGINEERING REPORTS TO: CHIEF ENGINEER/OPERATIONS MANAGER JOB TYPE: FULL AND PART-TIME POSITIONS AVAILABLE Summary: As an Engineer Tech for the Hotel Division of Summit Hospitality Group, you hold an essential position responsible for performing a variety of work in the maintenance and repair of the hotel's facilities, and equipment. Will promote a safe working environment and quality of service to achieve maximum guest satisfaction. The Engineer Tech will work with managers, inspectors, and department heads to ensure maximum efficiency and safety and shall strive to always provide service to both internal and external guests. Qualifications: 1-2 years of experience with name brand hotel Engineer experience preferred Can-do attitude and willingness to jump-in and do the assigned work in a cheerful and respectful manner Service oriented style with professional presentation High energy and attention to detail Teamwork and partnership attitude towards fellow associates and management Requirements Responsibilities: Ensures complete guest satisfaction. Treats guest in friendly and helpful manner. Assists with preventative maintenance and completing work orders such as replacing ceiling tiles, light bulbs, patching vinyl, etc. to maintain the hotel and keep the product quality to standard. Performs other preventative maintenance assignments on a scheduled basis such as “room care”. Services the hotel's pool, including adjusting chemicals and cleaning filters, completing maintenance request forms and record logs. Assists in checking and making minor repairs on general plumbing systems and fixtures such as pipelines, toilets and sinks, kitchen and laundry equipment. Responds in a courteous manner to all guest questions, complaints, and or requests to ensure strong guest satisfaction. Must be able to recognize potential safety hazards and security problems in the hotel and act upon each, accordingly; be willing and able to comply with hotel policies and procedures including appearance and grooming, safety, security, key control and emergency procedures. Must have some knowledge associated with HVAC, boilers, electrical, carpentry, dry walling, painting, plumbing, roofing, and landscaping. Must be able to troubleshoot and repair routine mechanical and electrical malfunctions in hotel systems and equipment. Must be willing and able to be responsive to complaints and maintenance and be willing and able to “pitch-in” and help co-workers with their job duties and be a team player. Maintains all franchise standards and follow-up on inspection deficiencies. Investigates guest complaints. Assists in conducting the departmental operational audits and assists in developing corrective action plans. Practices the “Summit Hospitality Culture” and ensures all cultural expectations are implemented and regularly practiced. Supports hotel's training needs and efforts. Duties are subject to change and additional responsibilities/tasks may be assigned as needed. Work Environment: Flexible work schedule including availability on weekends Must have reliable source of transportation Must be able to stand up and move about the facility for the majority of shift Must be able to occasionally lift, carry, push & pull up to 50 lbs Must be able to perform simple grasping, fine manipulation, and repetitive hand & arm movements frequently, and squeezing & overhead reaching occasionally Must be able to bend, squat, crawl, kneel, push, pull, walk on uneven surfaces on a frequent basis Must be able to frequently handle objects and equipment to maintain the facility The physical demands described here are representative of those that must be met by associate to successfully perform the essential functions of this job. Must have the ability to obtain and/or maintain any government required licenses, certificates, or permits Benefits: Fulltime Employees Personal time after 90-days Insurance benefits after 90-days Vacation Time Summit Hospitality Group is an Equal Opportunity Employer. Summit Hospitality Group LTD. and its affiliates provide equal employment opportunities to all applicants without regard to an applicant's race, color, sex, religion, disability, national origin, citizenship, veteran status, genetic information, sexual orientation or gender identity, or on the basis of age with respect to persons 18 years or older.

Job Title: Engineering Technician Department: Engineering Reports To: Engineering Manager We're looking for a hands-on, mechanically inclined individual to join our team as an Engineering Technician - Implementation. This role serves as the critical link between the Engineering team and the shop floor, helping bring new designs and continuous improvement projects to life. From assembling custom fixtures to installing them in production, you'll play a key role in turning ideas into real-world solutions. Key Responsibilities: Assemble new fixtures, jigs, and tooling based on engineering designs Work from 2D prints and 3D CAD models to understand and execute builds Perform MIG welding on steel components as required Use hand tools, drills, presses, grinders, taps, and other equipment to fabricate and assemble parts Operate or learn to operate forklifts and overhead cranes to move materials and equipment Run test pieces on new fixtures to verify proper function before full implementation Work independently in the Fab Lab to support new projects and CI (continuous improvement) initiatives Collaborate closely with engineers to ensure projects meet safety, quality, and efficiency goals Support the implementation of new tools and fixtures on the production floor Required Skills and Qualifications: MIG welding ability Ability to read 2D engineering drawings and visualize 3D designs Strong problem-solving skills and mechanical aptitude Ability to use common hand tools and basic shop equipment Interest in learning to drive a forklift and operate an overhead crane Comfortable working on custom, one-off projects (not repetitive production work) Self-motivated with the ability to manage time and tasks with minimal supervision Why This Role Exists: This position was created to fill a growing gap between Engineering and Maintenance. With an increasing number of new fixtures, jigs, and CI projects, our current maintenance team is stretched too thin to keep up. This role ensures critical projects don't get delayed due to other shop priorities. You'll take ownership of building and implementing new equipment-ensuring it's done right, on time, and ready for production.

Global Channel Management is a technology company that specializes in various types of recruiting and staff augmentation. Our account managers and recruiters have over a decade of experience in various verticals. GCM understands the challenges companies face when it comes to the skills and experience needed to fill the void of the day to day function. Organizations need to reduce training and labor costs but at same requiring the best "talent " for the job. Qualifications Engineering Technician needs Vocational and/or diploma in an engineering field • 1-3 years in engineering information systems and/or engineering services Engineering Technician requires: Management and operation of rapid prototyping processes (Stratasys Objet and FDM) • Working knowledge of various software and business operating systems such as: o ECR/ECO workflows (WorkflowGen, WindChill, Enovia a plus) o Product Data Management (Autodesk Vault, PTC WindChill, Enovia a plus) o CAD Administration (Autodesk Inventor, PTC Creo, Solidworks a plus) o ERP software (BAAN, SAP) a plus Engineering Technician duties: Reviewing drawings in the release cycle for proper notation, revision and format (non-technical content) Approving the release of drawings and entering them into the PDM/repository system • Entering BOM and release information into the ERP system (data entry) • Additional Information $26/hr 6 months