Engineering technician jobs in Sandy Springs, GA - 610 jobs

FUNCTIONAL PURPOSE: Independently performs the full range of diagnostic, preventive maintenance, alignment and calibration, and overhaul tasks, on both hardware and software on a variety of mail processing, customer service, and building equipment and systems, applying advanced technical knowledge to solve complex problems. DUTIES AND RESPONSIBILITIES: Performs complex testing, diagnosis, maintenance, alignments and calibration, overhaul, and revision, of electronically operated or controlled equipment or systems; may be required to perform maintenance of associated electromechanical equipment and systems. Observes the operation of systems and equipment, and applies various testing and diagnostic methods and procedures to locate and correct malfunctions and/or failures and ensures maximum system performance. Performs equipment inspections to assess the quality of service or maintenance received, and to discover incipient malfunctions; initiates work orders requesting corrective actions for equipment not meeting maintenance or operating standards; estimates time and materials necessary to make corrections and conducts investigations of frequent or serious equipment failures to determine the cause of the breakdown and to recommend remedial maintenance action. Recommends changes to servicing and preventive maintenance activities; assists in the revision of preventive maintenance and operator checklists, and their frequency to sustain the proper degree of maintenance. Performs analyses of equipment failures; reviews operational reports, audits, and other information, to determine where operational enhancement can be made to prevent equipment or systems deterioration. Participates in the installation, removal, modification, assembly, and/or disassembly of systems and equipment. Participates in classroom, on-the-job, and correspondence training programs; attends courses at postal facilities, trade schools, and manufacturers sites; assists in developing and implementing training programs; provides on-the-job training to other lower level maintenance employees. Provides technical support to other employees in the facility or in installations within the area served; performs in-process and final operational checks and tests work completed by other employees; may work without direct supervision. May drive a vehicle or use other appropriate modes of transportation in the course of assigned duties. Follows established safety practices and requirements while performing all duties; reads and adheres to instructions listed in applicable maintenance directives; maintains a library of maintenance directives. Performs other duties as assigned. REQUIREMENTS: Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings. Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers. Knowledge of the National Electrical Code may be required for employees in a skilled position. This also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.). Knowledge of electronic principles; this includes knowledge of (A) basic logic gates, symbology, resistors, memory, encoders, decoders, etc.; (B) Hardware/components - such as solid state devices (diodes, transistors, etc.), coils, capacitors, etc.; (C) Digital circuit components - as in registers, adders, counters, memories, flip-flops, encoders, decoders, etc.; and D) AC and DC circuitry - as in circuit analysis, schematic interpretation, etc. Knowledge of and ability to follow safety and security procedures for performing maintenance work This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques. Knowledge of current computer technology to understand how technology may be applied to solve a problem or improve system design; this includes knowledge of hardware, software and networking technology/systems and integrated computer systems. This includes knowledge related to: (A) the Operation of computer terminals or other peripherals to enter, operate, and exit programs; to use the systems programs and (B) Retrieving and interpreting reports for diagnostic and information purposes. Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages. Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment. Ability to troubleshoot problems to analyze the root cause of a specific error and decide what action to take to prevent recurrence; to back track from a specific problem to identify the source of the error. Ability to think logically and critically; to understand the relevance of information; to identify relationships between information and data. Ability to think of possible causes for problems and find solutions; to choose the best course of action; to make a decision without delay when the opportunity arises or when all desired information is not available. Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas. Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics). Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets. Ability to communicate work related information in writing to maintenance, operations and other personnel to complete forms or provide routine and technical information (e.g., in work logs, e-mails, memos and technical reports/documents). Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order.Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect. Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately. Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms. Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws. Knowledge and ability to use test equipment, gauges or tools to take measurements and/or to take measurements with electrical or electronic test equipment (such as VOMs, oscilloscopes, amprobes) to perform maintenance work; this includes various types of maintenance equipment and may monitoring the operation of a system or machine or use of data networking test equipment. EXAMINATION REQUIREMENTS: Applicants must successfully complete Postal Service Test 955, for the Electronics Technician job group, which measures maintenance knowledge, skills and abilities. In addition, applicants must successfully complete a structured interview evaluation. ADDITIONAL PROVISIONS: 1. Applicants must be able to operate powered industrial equipment. 2. For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.

HSAGP (Hyundai-SK America Green power) Energy LLC. is Hyundai Motor Group and SK On' s joint venture company to produce batteries for electric vehicle batteries. The joint venture plans to invest $5 billion to build an EV battery cell plant in Bartow County, Georgia. Hyundai Motor Group and SK On will each hold a 50 percent stake in the joint venture. The new plant created by the two companies is expected to start manufacturing battery cells in the first half of 2026 with an annual production capacity of 35 GWh, enough to support the production of 300,000 EVs a year. The future Bartow County plant in northwest Georgia is strategically located near Hyundai Motor Group's existing and planned U.S. facilities. Hyundai Motor Group broke ground last year on the new Hyundai Motor Group Meta plant America in southeast Georgia to make future Hyundai, Genesis and Kia EVs. For more information visit our website Join us on the journey of two companies' massive electric vehicle project in Bartow County! Summary: Utility (Electrical) technician works in routine, following standard procedures under supervision. He/She is responsible for managing electrical substation facilities, measurement/control system and their parts. His/her main tasks include regular status check, operation of electrical switches (including circuit breaker, MCCB, MCB), replacement and cleaning. He/She is also required to take appropriate measures when there is any malfunction or damage of facilities. Job Duties and Responsibilities: Electrical Substation Maintenance 25kV SWGR voltage, current measurement 25kV SWGR alarm lamp operational status check 25kV Substation thermal imaging camera inspection 25kV other visual inspection 25kV P/D measurement 4.16kV SWGR voltage, current measurement 4.16kV SWGR alarm lamp operational status check 4.16kV SWGR Substation thermal imaging camera inspection 4.16kV other visual inspection Switch gear (Low voltage) voltage, current measurement Switch gear alarm lamp operational status check Switch gear thermal imaging camera inspection Switch gear other visual inspection Mold TR (25kV/4.16kV, 25kV/LV) alarm lamp operational status check Mold TR transformer thermal imaging camera inspection Mold TR exhaust fan operational status check Mold TR other visual inspection Automatic Control System Maintenance HVAC control valve, panel inspection/repairment Steam boiler, hot oil heater, and NMP inspection/repairment Gas detector inspection/repairment Temperature & humidity sensor and indicator (HVAC, process inspection/repairment) PLC and PLC communication/alarm inspection/repairment Portable equipment (instrument) management and calibration Control room HMI screen drawing support Legal Inspection Management Deal with regular inspection of government offices Document and keep legal inspection logs and related documents Facility Management Clean the electrical substation Create and update facility management history Create and update inspection log Troubleshooting Take appropriate measure when the facility is malfunctioning or damaged Other tasks as necessary to meet the organization's needs Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: High School Diploma or GED Experience: Broad knowledge of mechanical utility and tools obtained through work experience (Preferred) Relevant utility management experience in manufacturing environment Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English Ability to write routine reports and correspondence in English Language skills: Basic Skills in Microsoft Office (Excel, Word, PowerPoint, etc.) We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law .

Repair and testing processor-based pipe inspection systems including cameras, transport tractors, cable reels, and controllers. Ready to apply Before you do, make sure to read all the details pertaining to this job in the description below. The Electronics Technician maintains, troubleshoots, and tests electronic circuits and systems that rely on solid‐state electronics. xevrcyc This role also provides technical support on complex hardware/software issues and intermittent system problems.

About Us Eric'sons Inc. is a leader in innovative trench drain solutions, dedicated to advancing automation technologies in our manufacturing processes. We are seeking a skilled Mechatronics Technician to join our Automation Team to support the development, maintenance, and improvement of our automated production line. Position Summary The Mechatronics Technician will be responsible for assembling, maintaining, troubleshooting, and improving automated systems that integrate mechanical, electrical, and control components. This is a hands-on role that combines practical shop-floor work with technical problem-solving. The ideal candidate will have strong mechanical aptitude, basic to intermediate electrical skills, and the ability to work collaboratively to keep equipment running at peak performance. Required Skills and Qualifications Strong mechanical aptitude with basic to intermediate electrical skills. Ability to read mechanical drawings and electrical schematics. Hands-on skills in assembly, basic fabrication, and mechanical repairs. Understanding of pneumatic systems and basic control systems. Proficient in the use of common hand tools, power tools, and measuring instruments. Good problem-solving skills and ability to work independently or as part of a team. Strong communication and organizational skills. Preferred Qualifications Experience in a manufacturing or industrial environment. Familiarity with PLCs and automation control systems (basic programming knowledge is a plus). Experience with preventive maintenance programs. Associate degree or technical certification in Mechatronics, Industrial Maintenance, or a related field.

Mistras Group is seeking full time Level II NDT Technician w/ Near drum certification for our Calhoun, GA location. C andidates must be local to the area to be considered. Relocation is not an option. The RT Technician performs NDT operations and evaluates results of NDT tests as certified by Mistras Services written practices to routine NDT methods. Inspects piping, tanks and vessels using the method of Radiography. MAJOR RESPONSIBILITIES/ACTIVITIES: Perform piping/vessel inspections in a lay down yard (Fab Shop) using Radiography and report findings. Train RT assistant, run the film and grade the film per specific procedures directed by the customer. Perform to set up and calibrate equipment and interpret and evaluate results with respect to applicable codes, standards, and specifications. Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel. Organize and report the results of NDT tests. Generate NDT data, organize data, and report findings. Evaluate data for disposition. Other duties as assigned MINIMUM REQUIREMENTS: High school diploma or GED Ability to generate technical data orally, in writing, and electronically as required and appropriate. 12 months prior NDT experience required. ESSENTIAL PHYSICAL FUNCTIONS: Frequent lifting up to 30 lbs. This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state's workers' compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled: #LI-KM1

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Quality Assurance Technician performs quality control checks on products to ensure they meet standards for safety, efficiency and quality. Quality Assurance Technician ensures products leave facility and meet expectations for consumers and distributors. Quality Assurance Technician will report on product quality and efficiencies to Quality team and provide suggestions and feedback when necessary. Quality Assurance Technician will follow all safety requirements and use of Personal Protective Equipment (PPE). Areas of Focus Quality Assurance Technician focuses on dock audits and record inspection and test results. Quality Assurance Technician will also report all questionable items, materials and/or processes to appropriate management for analysis and disposition. Responsibilities • Maintain Quality Assurance Department records, both hard copy and electronic copy • Perform simple quality tests, casting/pasting inspections, curing released, voltage, gravity, etc. • Perform acid receiving analysis and load acceptance • Perform battery autopsy analysis and identify failure modes • Assists QA Engineer with data collection and analysis • Understand the battery manufacturing process from receiving through shipping • Review circuit tending paperwork • Troubleshoot any conditions that adversely affect product quality • Make recommendations for adjusting equipment • Fully perform QA procedures in all plant and shipping areas • Perform electrical testing/analysis of all battery types • Responsible individual with strong work ethic • Available for various shifts, and overtime Basic Qualifications • High School Diploma • Minimum 3 years of manufacturing and plant experience • Good writing and communication skills • Some formal QA training • Ability to use hand tools and learn specific machine controls, gauges, etc. • Understand specifications and labels associated with hazardous material • Proficient in Microsoft Office if you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Responsible for performing quality calibrations adhering to corporate quality standards and procedures. Essential Functions: Calibration encompassing the following core disciplines: Temperature, Pressure, Vibration, Mass, Electrical, Electronics, Time, Torque, Force and Dimension. Additional training will be provided post-hire as needed. Prepare for all on-sites as assigned by Lead Tech or Service Manager; this includes reviewing equipment lists, procedures, specifications, and ensuring proper standards are selected for work assigned. Person must ensure he/she has calibration stickers, PMD work orders, worksheets, tags, cleaning supplies, directions, customer contact information and survey cards; downloading customer information to an on-site laptop may be required. Person must ensure all company issued tools and property are in proper working order and in calibration. Perform clerical work associated with calibration activities including certificates of calibration. Must provide the original data worksheet for final inspection by Quality. Perform quality inspection of calibrated equipment as approved by the Quality Manager. All certificates for equipment calibrated on-site and in house shall be completed in a timely manner (within 48 hours of job completion.) Keep in good order all tools and equipment, practice good housekeeping Maintain a safety and customer service mindset at all times Consistently maintain good work attendance and productive work ethic. Will perform other duties as assigned by the Service Manager Minimum Requirements/Qualifications: A strong understanding of a wide variety of precision measurement equipment, to include the care and use of Instrumentation, Gages, and Precision Measurement Equipment; calibration program management, and Measurement Principles. Be proficient in gage management software Be computer proficient in all Microsoft Office applications Have a strong understanding of computer system peripherals and communication configurations Demonstrate excellent interpersonal and customer service skills Have excellent written and oral communication skills, both internally and externally Demonstrate self motivation, initiative, honesty, integrity, and attention to detail Have a valid driver's license and clean driving record Associates Degree in a technical discipline preferred; Instrumentation, Industrial, Mechanical, or Electronics Engineering, for example. Navy or Marine Corp GCAMS / ACTS , AF PMEL, or Army MOS - 94H Test Measurement & Diagnostic Equipment Support Specialist Core Competencies Commitment to Excellence - Check your work Customer Relationship Management - communicate with customers to deliver better service Methodical Approach - troubleshooting Team Building Physical Demands: Stands greater than four hours at a time May require walking 2 - 4 miles during an 8 hour period Stoops and bends below knee level 2 - 4 times an hour Lifts and carries less than 50 pounds but greater than 25 pounds repetitively Climbs stairs more than four times in an eight hour shift Pushes / pulls objects greater than 25 pounds Reaches out Reaches overhead Repetitively uses feet Repetitively uses hands (computer keyboard) Grips with hands

Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technician Aides to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materials-including soil, concrete, and masonry-in accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance with project specifications and documenting field results accurately and clearly. The position requires physical stamina, attention to safety protocols, reliable transportation, and the ability to obtain industry certifications such as ACI, ICC, and OSHA. Successful candidates will demonstrate a commitment to quality, safety, and professionalism while working in dynamic construction environments. Requirements Education: Engineering technicians must have a high school diploma or the GED high school equivalency credential. Certification: Engineering technicians will obtain and maintain relevant ACI, ICC, and OSHA certifications, as well as other certifications as deemed appropriate by their supervisor. Pre-employment Requirements: Drug Testing: All job applicants will undergo testing for the presence of illegal drugs as a condition of employment. All employees will follow Geo-Hydro Engineers' Drug Free Workplace Substance Abuse Policy. Driving Record: Engineering technicians will have a valid driver's license with no violations that prevent them from being insured through the company's insurance carrier. The ability to be insured is at the discretion of the company's insurance carrier. The insurance carrier routinely reviews employee's driving records and may determine at any time than any employee will no longer be permitted to operate any company vehicle. Job Responsibilities and Requirements: Observation: Engineering technicians must be able to observe construction work for compliance with applicable project drawings and specifications, and for general accordance with International Building Code requirements. Testing: Engineering technicians must be able to perform field and laboratory testing of soil, stone, concrete, grout, masonry, and other construction materials in accordance with ASTM standards. Applicable ASTM standards include but are not limited to the following: D-698, D-1557, D-1556, D-2937, D-2216, D-6938, C-31, C-143, C-173, C-231, and ASTM STP 399. Documentation: Engineering technicians document field observations and test results by writing legibly in English with proper grammar. Basic mathematics (addition, subtraction, multiplication, and division) is an integral part of all testing and reporting. Safety: Engineering Technicians must wear appropriate personal protection equipment (PPE), attend safety training sessions, and follow the requirements within the Geo-Hydro Safety and Health Manual. Physical Requirements Lifting: Must be able to lift, load and unload soil, sand, asphalt, CMU, and concrete samples weighing up to 100 pounds. Concrete Sampling and Testing: Must be able to maneuver a 6-cubic foot wheelbarrow loaded with 150-200 pounds of fresh concrete for up to 50 yards over uneven ground. Unit weight testing requires lifting a 50-pound container of concrete. Six-inch compressive strength test cylinders weigh 30 pounds each. Volumetric air content testing requires repeated swinging of the 30-pound concrete-filled test device from knee-level to head-level. Soil Density Testing: The technician must be able to repeatedly drop a 25-pound drop slide hammer to drive sampling tubes into the ground and then manually excavate the sampling tubes back out of the ground with mattock and shovel. Must be able to load and unload a 90-pound case containing a nuclear density gauge and carry the 50-pound nuclear density gauge by hand for up to 50 yards over uneven ground. Hand Auger and Penetrometer: Must be able to manually hand auger down to 10 feet into soil to obtain samples and perform portable dynamic cone penetrometer testing. The hand auger may require up to 50 pounds of pull to remove it from wet soil conditions. The total weight of the dynamic cone penetrometer ranges from 20 to 40 pounds. Operation of the penetrometer requires repeated raising and dropping of the 15 pound slide weight.

Job DescriptionBenefits: Free Friday Breakfasts A positive and collaborative work environment Voluntary Life Insurance Short and Long Term Disability Medical, Dental and Vision 401K Matching (after 6 months of employment) Company work truck is provided * offered after 60 days of employment Company Overview At Generator Supercenter of South ATL, we are a cohesive team that works together, supports professional growth, and strives for excellence. We maintain a positive workplace and operate with a constant customer satisfaction focus. Were committed to achieving our company goals and striving to make our employees fulfilled and our customer's content. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customers residence to perform repair work and preventative maintenance on the customers whole home standby generator. You will regularly use verbal communication and customer service skills to communicate directly with our customers. You will use mechanical and electrical knowledge of generators or small engines to troubleshoot and repair whole home standby generators for our customers. This work will require the ability to read and understand technical manuals, instructions, electrical wiring diagrams, and blueprints. When repairs and preventative maintenance are complete, you will use electronic/written communication skills to update the software system with information regarding services you performed. This position will frequently work around electricity and will require the ability to adhere to all safety practices and requirements. The work schedule will typically be Mon-Fri from 8 am-5 pm. The work schedule is subject to change to support the needs of our customers, for example during times of bad weather/impending storms. The level of electrical and mechanical repair knowledge, years of direct generator repair experience, and previous experience working directly with customers will all be taken into account when determining what ones starting pay level would be within this range. Responsibilities Using company vehicle travel to customers residence Communicate directly with customers regarding arrival, work being performed, issues resolved, etc. Inspect, troubleshoot, repair, and perform maintenance on the customers home generator. Follow technical instruction manuals, diagrams, blueprints, and procedures. Test, troubleshoot, and operate automatic transfer switches. Document services are performed using an electronic software system Adhere to all safety practices and requirements. Along with the duties above, other duties may be assigned. Qualifications Strong customer service and communication skills (verbal and written). Problem-solving, organization, and decision-making skills Ability to work independently demonstrating initiative. Reading and comprehension skills are required to understand technical manuals, electrical wiring diagrams, and blueprints. Ability to drive company vehicles safely to each customers residence within and surrounding area. High school diploma or equivalent Experience with mechanical small engine repair work Experience with electrical wiring. Valid driver's license and satisfactory driving record Be physically able to perform the job duties including bending, stooping, climbing ladders, pulling, grasping, and walking on uneven surfaces The ability to work primarily outdoors in varying weather conditions and temperatures. Proper eyesight/vision to be able to perform mechanical repairs safely. Must be able to interpret technical manuals, blueprints, and schematics. Must be able to drive company vehicles to each job site.

Join Barfield and Become a Part of the Adventure! If you are a talented Mechanical Technician interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry: it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Mechanical Technician to join our team. The Mechanical Technician will support our Mechanical Department Duties and Responsibilities: Test, troubleshoot, repair, and calibrate units using schematics diagrams, Component Maintenance Manuals (CMM), and other documents such as Airworthiness Directives, Service Bulletins, and customer Engineering Orders. Inspect and test Mechanical Aircraft Components to identify defects and wear and tear areas. Disassemble, clean, and inspect Aircraft Component. Repair or replace damaged or worn components. Reassemble and test Mechanical units to ensure proper operation. Performs a variety of complicated tasks. Needs to be familiar with various Component Maintenance Manuals (CMM) practices and procedures. Reports to the lead person, supervisor, or manager. Requirements and Skills High School diploma or equivalent. Basic computer skills. Successfully completed technical training by a certifying educational institution or 1-2 years of bench experience in the field or related area. Reads, understands and, interprets directions of appropriate maintenance manuals to identify. Must be able to evaluate, troubleshoot, repair, and calibrate units using official documents. Must have knowledge and experience with mechanical tools, multimeters, micrometers, calipers, measuring indicators, and gauges. Must be able to work with little or no supervision. Ability to work with standardized tools and electric equipment. Ability to follow safety procedures and guidelines. Successful Factors Technical college, or Military training in their expertise. Knowledgeable, friendly, positive attitude, be a “Team Player”, always willing to learn new tasks, new skills and participate with peers. Share ideas to improve processes. You embody our values : CUSTOMER FOCUS We strive to provide the best services to our customers. INTEGRITY We are personally accountable for the highest standards of ethical behavior. TEAMWORK We are committed to a teamwork environment. ADAPTABILITY In an ever-changing world, we are adaptable to the required challenges. We offer a comprehensive total compensation and benefits package. For more information about us, please visit our website at ******************* Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

BSW Staffing is currently hiring an experienced Mechatronics Technician on behalf of our valued client located in Adairsville, GA. This is an excellent opportunity for a hands-on professional who excels in troubleshooting, automation, and mechanical systems. Candidates must be willing to travel as needed for this position. About the Role We're seeking a dedicated and skilled Mechatronics Technician with experience in millwright work, welding, hydraulics, electrical systems, and fabrication. This role involves maintaining and optimizing industrial equipment to ensure smooth and efficient operations. Key Responsibilities System Integration & Troubleshooting: Diagnose, repair, and optimize mechanical, electrical, and software systems including PLCs, robotics, sensors, and vision systems. Preventive Maintenance: Develop and execute maintenance schedules to ensure maximum uptime and reliability. Automation Support: Assist with installation, calibration, and commissioning of automated systems and robotic cells. Documentation & Reporting: Maintain detailed records of maintenance activities, system updates, and performance metrics. Collaboration: Partner with engineers and production teams to implement improvements and resolve technical challenges. Qualifications Education: Associate's degree or higher in Mechatronics, Electrical Engineering Technology, Robotics, or related field preferred (not required). Experience: Minimum 5 years of hands-on experience with automation systems, robotics, or industrial machinery. Technical Skills: Proficient in PLC programming (Allen Bradley, Siemens), electrical schematics, mechanical systems, and industrial controls. Certifications: CMRT or equivalent certifications preferred. Soft Skills: Strong problem-solving abilities, attention to detail, effective communication, and a proactive attitude toward continuous improvement. Why Join BSW? At BSW Staffing, we connect skilled professionals with outstanding career opportunities across Georgia. We value hard work, reliability, and a commitment to excellence - and we're here to support your success every step of the way. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Paid time off Ability to Commute: Adairsville, GA 30103 (Preferred) Ability to Relocate: Adairsville, GA 30103: Relocate before starting work (Preferred) Willingness to travel: 25% (Required) Work Location: In person

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Benefits: Free Friday Breakfasts A positive and collaborative work environment Voluntary Life Insurance Short and Long Term Disability Medical, Dental and Vision 401K Matching (after 6 months of employment) Company work truck is provided * offered after 60 days of employment Company OverviewAt Generator Supercenter of South ATL, we are a cohesive team that works together, supports professional growth, and strives for excellence. We maintain a positive workplace and operate with a constant customer satisfaction focus. We're committed to achieving our company goals and striving to make our employees fulfilled and our customer's content. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer's residence to perform repair work and preventative maintenance on the customer's whole home standby generator. You will regularly use verbal communication and customer service skills to communicate directly with our customers. You will use mechanical and electrical knowledge of generators or small engines to troubleshoot and repair whole home standby generators for our customers. This work will require the ability to read and understand technical manuals, instructions, electrical wiring diagrams, and blueprints. When repairs and preventative maintenance are complete, you will use electronic/written communication skills to update the software system with information regarding services you performed. This position will frequently work around electricity and will require the ability to adhere to all safety practices and requirements. The work schedule will typically be Mon-Fri from 8 am-5 pm. The work schedule is subject to change to support the needs of our customers, for example during times of bad weather/impending storms. The level of electrical and mechanical repair knowledge, years of direct generator repair experience, and previous experience working directly with customers will all be taken into account when determining what one's starting pay level would be within this range. Responsibilities Using company vehicle - travel to customer's residence Communicate directly with customers regarding arrival, work being performed, issues resolved, etc. Inspect, troubleshoot, repair, and perform maintenance on the customer's home generator. Follow technical instruction manuals, diagrams, blueprints, and procedures. Test, troubleshoot, and operate automatic transfer switches. Document services are performed using an electronic software system Adhere to all safety practices and requirements. Along with the duties above, other duties may be assigned. Qualifications Strong customer service and communication skills (verbal and written). Problem-solving, organization, and decision-making skills Ability to work independently demonstrating initiative. Reading and comprehension skills are required to understand technical manuals, electrical wiring diagrams, and blueprints. Ability to drive company vehicles safely to each customer's residence within and surrounding area. High school diploma or equivalent Experience with mechanical small engine repair work Experience with electrical wiring. Valid driver's license and satisfactory driving record Be physically able to perform the job duties including bending, stooping, climbing ladders, pulling, grasping, and walking on uneven surfaces The ability to work primarily outdoors in varying weather conditions and temperatures. Proper eyesight/vision to be able to perform mechanical repairs safely. Must be able to interpret technical manuals, blueprints, and schematics. Must be able to drive company vehicles to each job site. Compensation: $18.00 - $25.00 per hour Join The Generator Supercenter Family - Here it's not just some catchy phrase; it's a lifestyle. We're looking for amazing people who believe in helping others, through the sales, installation, and maintenance of whole home generators that empower our customers with peace of mind, security, and freedom. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Generator Supercenter Corporate.

We have an exciting opportunity for a Manufacturing Engineering Technician to join a growing manufacturing team. This role offers the chance to make an impact across all areas of production, from new product launches to process improvements, while collaborating closely with Engineering, Customer Service, Quality, Sales, and Production teams. The ideal candidate will bring a strong technical foundation, the ability to read and interpret blueprints, and solid computer skills-particularly in Excel. This is a hands-on role with direct influence over production efficiency, product implementation, and customer satisfaction. Key Responsibilities: Coordinate and schedule kick-off meetings for new product implementations Collaborate with production teams to determine staffing and work cell needs for start-ups Organize and oversee product launches to meet customer requirements Ensure work instructions and documentation are complete prior to production release Verify tooling, fixtures, and assembly equipment are ready and certified Track and report production times against quoted estimates Evaluate existing assemblies for process improvements using time studies and production feedback Support production transfers between facilities, including materials and tooling Design fixture and testing solutions to support manufacturing Proactively identify and report safety concerns and implement precautions within assigned projects Qualifications: Associate's degree in Engineering, Drafting, Mathematics, or a related technical field (Bachelor's degree in Mechanical/Electrical Engineering Technology a plus, but not required) Ability to read and interpret blueprints Strong computer skills, including Excel and MS Office Excellent communication and organizational skills Hands-on manufacturing, soldering, or assembly experience is a plus What's in it for you: Opportunity to work on diverse projects impacting multiple departments Direct involvement in new product development and continuous improvement initiatives A collaborative environment where technical skills and problem-solving are highly valued Stable, long-term career growth with a company that has been in business for over 40 years If you enjoy being the bridge between engineering and production, and you're ready to apply your technical skills in a dynamic manufacturing environment, we want to hear from you! Please send your resume to hmccormick@selectek.net for consideration.

Requisition No: 860466 Agency: Department of Corrections Working Title: Electronic Technician II - Statewide Pay Plan: Career Service Position Number: 70044444 Salary: $43,080.70 - $47,867.30 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Electronic Technician II- Statewide This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the maintenance, repair, and installation of all types of electronic systems and devices including but not limited to, electronic perimeter security systems, internal electronic security systems, electronic and electrical locking control systems, CCTV systems, communications systems, and associated systems and components utilized in the operation of a correctional facility. * Responsible for the maintenance, repair, and installation of electrical infrastructure, systems, and devices, and provides on-the-job training to supervised inmates. * Performs preventive maintenance, tests, logs, and keeps records for electrical systems as per Department guidelines. * Repairs and modifies complex electronic equipment and operates, repairs, and calibrates various testing equipment. * Plans and organizes work, requisitions necessary parts, and adheres to maintenance and construction policies and procedures. * Prepares reports, maintains custody and control of supervised inmates, participates in departmental staff training, and performs other related duties as required. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A high school diploma or its equivalent and at least one (1) year of experience in the electronics /electrician field OR four or more years of electronics experience (College or vocational/technical training in one of the above listed trades can substitute for the required experience.) * A valid Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:

A leading agriculture and food corporation in Atlanta is seeking a Principal in Cyber Engineering & Technology Operations. This role focuses on the strategic design and improvement of cybersecurity technologies, prioritizing data, endpoint, and AI security. The ideal candidate should have at least 6 years of relevant experience, expertise in email protection, and hands-on experience with Microsoft Purview. A competitive salary and comprehensive benefits are offered. #J-18808-Ljbffr

HSAGP (Hyundai-SK America Green power) Energy LLC. is Hyundai Motor Group and SK On' s joint venture company to produce batteries for electric vehicle batteries. The joint venture plans to invest $5 billion to build an EV battery cell plant in Bartow County, Georgia. Hyundai Motor Group and SK On will each hold a 50 percent stake in the joint venture. The new plant created by the two companies is expected to start manufacturing battery cells in the first half of 2026 with an annual production capacity of 35 GWh, enough to support the production of 300,000 EVs a year. The future Bartow County plant in northwest Georgia is strategically located near Hyundai Motor Group's existing and planned U.S. facilities. Hyundai Motor Group broke ground last year on the new Hyundai Motor Group Meta plant America in southeast Georgia to make future Hyundai, Genesis and Kia EVs. For more information visit our website Join us on the journey of two companies' massive electric vehicle project in Bartow County! Summary: Utility (Monitoring) technician (or operator) works in routine, following standard procedures under supervision. He/She is responsible for monitoring mechanical facilities and electrical facilities at CCR (Central Control Room), measurement/control system and their parts. His/Her main tasks include regular facilities operation monitoring, alarm/trip monitoring and reporting, root cause study, adjusting set point guided by Engineers. He/She is also required to check the monitoring data/performances of facilities and communicate with Supervisor/Technician to resolve the site trouble when there is any malfunction/damage/alarm/underperformance of facilities. He/She will also need to report the log data, trend, event records using Central Utility/Power Monitoring System. Job Duties and Responsibilities: Electrical Power Monitoring 25kV SWGR operation, alarm, voltage, current, power monitoring & log 4.16kV SWGR operation, alarm, voltage, current, power monitoring & log Switch gear (low voltage) operation, alarm, voltage, current, power monitoring & log Mold TR (25kV/4.16kV/LV) alarm/temp status check Utility/HVAC Monitoring HVAC control/operation, temperature, pressure, due point monitoring & log Operation/alarm/Service data for Steam boiler, hot oil heater, NMP, ACT, CESS (Central Electrolytes Supply System), air compressor, chiller & cooling tower, N2, NG Room Temperature & humidity sensor and indicator (HVAC, process) Servicing instrument value/trouble monitoring & log PLC and PLC communication/alarm monitoring & log Energy Monitoring Natural Gas usages with operational boiler units Water/Waste water usages with relevant process/utility operational status Electric usages Find energy savings Shut down / Trouble / Emergency Respond / Support Receiving claims, check the operational status/condition Support/communicate supervisor/technicians for field actions Create and update event record & log Other tasks as necessary to meet the organization's objectives Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education: High School Diploma or GED Experience: Knowledge of mechanical utility and tools obtained through work experience (Preferred) Telecommunication & Network experiences or understanding (Preferred) HVAC & Utilities, electric system, Automation & PLC experiences or understanding Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English Ability to write routine reports and correspondence in English Core Competencies: Professional Competencies: Advanced understanding of UT facility Advanced troubleshooting ability to deal with facility malfunctions Advanced understanding of measuring tools and methods Ability to manage and prioritize workload Prepare routine documentation as required under limited supervision Ability to solve problems related to utility (mechanical) that might require analysis to understand Behavioral Competencies: Overcome fear of failure and strives to keep trying with a can-do attitude and high level of enthusiasm Take ownership of the tasks and complete it responsibly Build cross-functional relationships within and outside the organization and collaborate to achieve organizational goals through good communication and information sharing Clearly understand the expectations and desires of others and clearly communicate with others through various forms of communication to achieve organizational goals Continuously develop and secure knowledge and skills in related areas of work and utilize them appropriately in the organization Always work with a problem-solving mindset and strive to execute ideas for work improvement into practice Treat everyone with respect and sensitivity to differences among individuals as a result of language, cultural background. Derive logical conclusions even in somewhat difficult situation or from limited number of options available We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law .

Join Barfield and Become a Part of the Adventure! If you are a talented Technician professional interested in working in the exciting field of aviation, Barfield wants you! Barfield is more than just a prestigious name in the industry: it is subsidiary of Air France Industries KLM Engineering We are looking to hire a dedicated Technician to join our team who will support our Mechanical department. Job Title: Mechanical Technician Department: Operations/Production Employee Status: Full Time - Non-Exempt Duties and Responsibilities Test, troubleshoot, repair, and calibrate units using schematics diagrams, Component Maintenance Manuals (CMM), and other documents such as Airworthiness Directives, Service Bulletins, and customer Engineering Orders. Inspect and test Mechanical Aircraft Components to identify defects and wear and tear areas. Disassemble, clean, and inspect Aircraft Component. Repair or replace damaged or worn components. Reassemble and test Mechanical units to ensure proper operation. Performs a variety of complicated tasks. Needs to be familiar with various Component Maintenance Manuals (CMM) practices and procedures. Reports to the lead person, supervisor, or manager. Requirements and Skills High School diploma or equivalent. Basic computer skills. Successfully completed technical training by a certifying educational institution or 1-2 years of bench experience in the field or related area. Reads, understands and, interprets directions of appropriate maintenance manuals to identify. Must be able to evaluate, troubleshoot, repair, and calibrate units using official documents. Must have knowledge and experience with mechanical tools, multimeters, micrometers, calipers, measuring indicators, and gauges. Must be able to work with little or no supervision. Ability to work with standardized tools and electric equipment. Ability to follow safety procedures and guidelines. Successful Factors Technical college, or Military training in their expertise. Knowledgeable, friendly, positive attitude, be a “Team Player”, always willing to learn new tasks, new skills and participate with peers. Share ideas to improve processes. We offer a comprehensive total compensation and benefits package. For more information about us, please visit our website at ******************* Barfield is an equal opportunity employer. Equal Employment Opportunity is the Law. This law requires Barfield to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights As a Federal Contractor, Barfield is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

We are seeking a Manufacturing Engineering Technician to join a dynamic team. This role offers a hands-on opportunity to impact all areas of production and manufacturing by working closely with Engineering, Production, Quality, Continuous Improvement, Customer Service, and Sales. You will play a key role in implementing new and existing product lines while ensuring customer requirements are met. Key Responsibilities: Schedule and lead kick-off meetings for new product implementations Coordinate with production to determine personnel needs for new product start-ups and work cell development Organize new product launches based on customer specifications Ensure Work Instructions (WI) or Detailed Assembly Instructions (DAI) are complete before production release Verify tooling and assembly fixtures are completed, certified, and ready for production Measure and report actual production times versus quoted times Manage new product launches and ensure all internal documentation is completed accurately Evaluate existing production assemblies for efficiency improvements using time studies, floor feedback, and system-based reports Coordinate production transfers between facilities, including material, tooling, and fixture transfers Design and program fixture testing solutions for production Identify and report safety hazards immediately, implementing precautions as necessary Qualifications: Associate's degree in engineering (mechanical or electrical preferred) Strong communication and organizational skills Ability to work collaboratively across multiple departments Basic engineering experience with a willingness to learn and grow in the role Why This Role? Hands-on role with exposure to multiple departments and processes Opportunity to contribute to new product launches and process improvements Collaborative environment with a focus on operational excellence Please send your resume to hmccormick@selectek.net for consideration.