Engineering technician jobs in Sierra Vista, AZ

Must be a US citizen. Must have Dimensional Metrology Experience. Calibrates and certifies Test, Measurement and Diagnostic Equipment (TMDE) traceable to the National Institute of Standards and Technology utilizing certified laboratory standards and manufacturer, commercial or military specifications/calibration procedures. Calibrates and troubleshoots fault isolation, adjustment and repairs using Test Measure Diagnostic Equipment (TMDE) certified laboratory standards. The candidate will be required to calibrate linear dimensional hand tools and other related equipment. Required Skills Proficient use of Microsoft Office Suite. This is an apprentice level position, and the candidate must display a positive attitude towards learning new tasks. Candidate must be detail orientated. Candidate must have strong math skills. Required Education High school diploma Required Years of Experience Requires 0-2 years of experience in the field or in a related area Desired Skills Applicable technical training, 2 years of direct experience in the field, or an associate degree in engineering technology or other relevant field or 1-year direct experience. Candidate should possess strong computer skills, experience with the following programs is a plus: Indysoft, Fluke Met/Team, Fluke Met/Track and Met/Cal experience a plus. Previous customer service experience is a plus. Familiarity with hand tools and their usage. Candidate should be proficient in High School level Algebra.

Supplier shall review the DCRM (Data Center Request Management) tool and acknowledge the work request by providing a date for completion within 24 hours. Supplier must complete the installation date within three (3) days of the request hitting the HSS queue. Installation priorities are to be coordinated with the onsite Verizon leader. New Installations will include the following tasks: ● Rack / cabinet installations ● Install power strips within cabinets ● Power up cabinets, label rack, update DCTracks ● Plug in IT equipment using best practices for loading a cabinet and power strips. ● Space provision IT devices in DCTracks ● Unboxing of hardware and disposal of packing material ● Rack and stack of IT devices ● Configure ILO / IDRAC on servers / network gear ● Install all patch cords as required. ● Install trunks and patch panels as required to support additional capacity ● Ping tests of all ILO connections. ● Attend planning meetings with customers, network, SAN teams ● Customer communications for DCRM details and closure ● Provide access for vendors and complete any required paperwork to telco Meet me rooms ● Perform all, IT audits, annual DCtrack and Tape audits ● Parts ordering(quote gathering) and submissions for purchase ordering ● Vendor access approval for break fix activity and facility repairs. ● Provide on call support as required ● Provide Emergency onsite coverage (may be extended time frame) ● Provide support to facilities teams during any power work being performed within the facility where pre and post IT power checks must be performed.

Data Center Technician (Breakfix). Qualifications: · Physical layer: fiber optic connections, contamination, cleaning · Understand ESD best practices · Comfortable with text based CLI · Familiar with IP based networking · A+/Network+ level of knowledge required · Good understanding of OSI layer and network principles · 2+ years of DC experience required · 4+ years of IT related experience required · Familiarity with the Linux based systems and experience with scripting and automation (Bash, Python, Perl) · Understanding BGP routing protocols, spanning tree, VRRP, LACP · Good organization, multitasking and communication skills · Microsoft Office Tools: Word, Outlook, Excel · Understanding of network procedures, environmental and safety management in a DC environment Responsibilities: · Physical hardware swaps: (Fabric and Backbone) o Optical transceiver swaps / Circuit diagnosis o Line card swap o TOR Replacement o Work with vendors for RMA's o Must be able to lift 50lbs · Asset Management · Tools and Ticket management · Build relationships with partner teams within the DC · Ability to review hardware logs, isolate and identify root cause · Remote link troubleshooting · Ability to mentor and guide L1 resource

Cabling & Termination ● The Fiber Technician will mount and install racks, patch panels, fiber optic and hardware. Install grounding for racks, equipment and cable as required. ● The Fiber Technician performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable; use a tone set. ● The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA and MPO/MTP connectors, for both multi-mode & single-mode fiber ● The Fiber Technician will terminate simplex & duplex jumper cord ● The Fiber Technician will terminate & breakout outside plant fiber ● The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber ● The Fiber Technician will install fan out kits including buffer tube ● The Fiber Technician will calculate end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber ● The Fiber Technician will fully complete all paperwork accurately and on time specifically: timesheets, material transfers, work orders, change orders, tool transfers and others as required ● The Fiber Technician will complete any other duties as assigned Physical and Mental Requirements: ● The Fiber Technician must be self-motivated, positive in approach, professional and help create, develop, and implement project process improvement(s). ● The Fiber Technician must promote the Company culture and mission to all employees, vendors, clients, and business partners. ● The Fiber Technician must possess and be proficient with the listed tools. ● The Fiber Technician must be able to act as the Company liaison for interface with customer representative(s). ● The Fiber Technician must possess proven problem-solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s). ● The Fiber Technician must be able to work at heights, off a ladder and in confined spaces, lift up to 50 pounds and move up to 75 pounds. ● The Fiber Technician must be able to see and distinguish different colors, read small print, and hear and recognize audible signals such as dial tones. Disclaimer HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. Compensation and Benefits A candidate's pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

Qualifications: · Physical layer: fiber optic connections, contamination, cleaning · Understand ESD best practices · Comfortable with text based CLI · Familiar with IP based networking · A+/Network+ level of knowledge required · Good understanding of OSI layer and network principles · 2+ years of DC experience required · 4+ years of IT related experience required · Familiarity with the Linux based systems and experience with scripting and automation (Bash, Python, Perl) · Understanding BGP routing protocols, spanning tree, VRRP, LACP · Good organization, multitasking and communication skills · Microsoft Office Tools: Word, Outlook, Excel · Understanding of network procedures, environmental and safety management in a DC environment Responsibilities: · Physical hardware swaps: (Fabric and Backbone) o Optical transceiver swaps / Circuit diagnosis o Line card swap o TOR Replacement o Work with vendors for RMA's o Must be able to lift 50lbs · Asset Management · Tools and Ticket management · Build relationships with partner teams within the DC · Ability to review hardware logs, isolate and identify root cause · Remote link troubleshooting · Ability to mentor and guide L1 resource

InDyne is a full-service military, civilian and commercial operations company. Our Mission is to provide tailored cost effective, quality services and solutions. Our Vision is to exceed customer expectations by delivering results through agility, flexibility and responsiveness. Our Core Values include integrity, trust and loyalty. Responsibilities The Technician IV (Multi Media) performs duties similar to Engineering Technician IV but focus on the EPG Multi Media equipment and software. Assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. This technician performs at this level one or a combination of such typical duties as: Experience with running cable (fiber optic), splicing, preparing and repairing for installation and use is required. Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions; Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment Conducting various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and records test data; Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications, and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information operates video teleconferencing equipment including powering up teleconferencing equipment, checking equipment for proper operation, setting audio levels, positioning camera functions, performing secure or non-secure setup; operate or assist in operating session control panel, studio control unit, and high-resolution graphics Job tasks require this technician to provide assistance to users in conducting video teleconference sessions, which may include conference preparation, and monitor VTC equipment and system performance, reporting equipment and network problems to appropriate parties for maintenance or repair. Tasks require this specialist to provide assistance to users in conducting video teleconference sessions, which may include conference preparation, and monitor VTC equipment and system performance, reporting equipment and network problems to appropriate parties for maintenance or repair. Qualifications High School diploma and 6 years of experience or equivalent Experience with running cable (fiber optic), splicing, preparing and repairing for installation and use is required Advanced computer skills are required

The Surgical Technician/Tissue Processing Technician is responsible for the sterilization of surgical equipment, arrange surgical equipment and adjust medical tools to ensure that the surgical devices are functioning properly. Essential Duties and Responsibilities: + Places equipment and supplies in operating room and arranges instruments, according to instructions + Assists team members to place and position patient on table + Scrubs arms and hands and dons gown and gloves + Aids team to don gowns and gloves + Maintains supply of fluids, such as plasma, saline, blood, and glucose for use during operation + Hands instruments and supplies to surgeon, holds retractors, cuts sutures, and performs other tasks as directed by the surgeon during operation. + Puts dressings on patient following surgery + Counts sponges, needles, and instruments before and after operation + Washes and sterilizes equipment, using germicides and sterilizers + Cleans operating room + Performs other duties as assigned/necessary Minimum Requirements: + Surgical Technologist certification as applicable per state and/or client requirement + One year experience as a Surgical Technician preferred (Tissue Processing Technologist - only) + Degree in biology related field which includes a degree / certification as a Surgical Technologist preferred + Complies with all relevant professional standards of practice + Participation and completion of Amergis' Competency program when applicable + Current CPR if applicable + TB questionnaire, PPD or chest x-ray if applicable + Current Health certificate (per contract or state regulation) + Must meet all federal, state and local requirements + Successful completion of new hire training as applicable to job site + Understand patient confidentiality and HIPAA requirements + Ability to effectively elicit/provide information to and from appropriate individuals (including, but not limited to, supervisors, co-workers, clients) via strong communication skills; proficiency in the English language is required + Computer proficiency required + Must be at least 18 years of age Benefits At Amergis, we firmly believe that our employees are the heartbeat of our organization and we are happy to offer the following benefits: + Competitive pay & weekly paychecks + Health, dental, vision, and life insurance + 401(k) savings plan + Awards and recognition programs *Benefit eligibility is dependent on employment status. About Amergis Amergis, formerly known as Maxim Healthcare Staffing, has served our clients and communities by connecting people to the work that matters since 1988. We provide meaningful opportunities to our extensive network of healthcare and school-based professionals, ready to work in any hospital, government facility, or school. Through partnership and innovation, Amergis creates unmatched staffing experiences to deliver the best workforce solutions. Amergis is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

The technician will perform design and fabrication of highly precision components, tools, jigs and fixtures to support engineering development and production tooling and fixture needs. Candidate will be responsible for machining parts using manual mills, CNC mills, manual lathes, Drill presses, sheet metal shears, sheet metal brakes, and various other tools required to generate highly precision prototype parts to meet engineering needs. Skills: CNC Mills Manual Mills Manual Lathes Drill Presses Sheet Metal Shears Sheet Metal Brakes Requirements: High School Diploma 6-8 years experience in field Qualifications Skills: CNC Mills Manual Mills Manual Lathes Drill Presses Sheet Metal Shears Sheet Metal Brakes Requirements: High School Diploma 6-8 years experience in field Additional Information • Hours 8:00am-5:00pm 7+month contract position

Job DescriptionDescription:Make a Difference as a Process Technician Apprentice ANPI has an immediate opening for a Process Technician Apprentice. The role reports to the Operations Supervisor and will be instrumental in maintaining the safe and reliable running of the plants. Key Responsibilities · Train to become a fully competent Process Technician, which involves more responsibility in the production process · Operate rail and truck loading and unloading equipment, including conveyors, belts, buckets, pumps, hoses, etc. · Operate rail switch engine · Open and close large valves and electrical switches · Climb on top of trucks and on top of and inside rail cars to inspect interiors · Obtain samples of manufactured or purchased product to facilitate quality control inspection · Perform basic laboratory chemical analysis of products throughout the manufacturing process. · Measure and monitor tank levels · Operate scales · Participate as a member of the Emergency Response Team (ERT). · Provide detailed written records of tasks performed, including tank levels, quantities transferred, relief instructions, etc. · Any other duties as assigned Physical Demands · Position requires strenuous physical work. Heavy lifting, pushing or pulling of objects up to 50 pounds frequently. Weight over 50 pounds is to be lifted with assistance only. · Ability to climb and descend multi-level catwalks, stairs and ladders, move in and about piping and structural supports and using fine motor skills constantly. · Eyesight must be a minimum of 20/40 vision, corrected with spectacle lenses. Contact lenses may never be worn on plant. · Must have good hearing to be able to hear signals, horns, phones, or various operating sounds of the Plant. · The ongoing ability to participate with all duties assigned within their respective response teams, i.e. entry level suits, decontamination, rescue, confined space entry, Fire Brigade extinguisher use, etc. Requirements: · High School Diploma or equivalent · 2+ years of experience in manufacturing, construction, maintenance or a similar industry preferred · Chemical manufacturing operation experience preferred · Must be available to work rotating shifts, weekends, nights and holidays · Equal Opportunity Employer M/F/D/V

Nammo Defense Systems, Inc., a defense contractor, is the primary USA operation of the Nammo Group (Nammo AS). Nammo Defense Systems Inc. (NDS) develops, manufactures, and supports Shoulder Launched Munitions (SLMs), energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, and composite solutions including carbon fiber tubes and composite aerospace structures. JOB OVERVIEW: We are seeking a Senior SCADA & Data Systems Engineer to join our operations technology team. This role focuses on connecting manufacturing equipment and processes to our enterprise data environment through the Ignition SCADA platform (by Inductive Automation) and SQL databases. In this role you will own our multi-plant SCADA and OT systems. Architect, build, and operate Ignition, OPC, MSSQL, and the supporting server and network stack. Partner with Controls, IT, and Manufacturing to deliver uptime, traceability, and actionable data. How you will be rewarded as our Senior SCADA Systems Engineer - Operational Technology: • Competitive compensation • Monday-Thursday work week working four 10-hour days (off on Fridays) • Generous paid time off and Holiday Pay • Medical, Dental and Vision Insurance • 401(K), employee assistance programs, health savings account KEY RESPONSIBILITIES: SCADA architecture and development • Own Ignition across plants, including primary/secondary and new instances. • Build HMIs for control, labeling, traceability, transaction groups, and tag models. • Integrate via Ignition OPC and Kepware. Server and infrastructure ownership • Operate ~15 production servers: Windows/Linux for Ignition, Kepware/OPC, Python, Node-RED, Grafana. • Patching, upgrades, storage and capacity, backup/restore, incident response. Databases and data engineering • Design schemas and ERDs, stand up and administer SQL Server instances. • Create jobs, maintenance plans, and verified backups; optimize logging pipelines. Controls integration and triage • Work with Controls to diagnose faults, walk ladder logic, trace I/O and comms issues. • Guide fixes that cross PLC logic, OPC, network, and database boundaries. OT networking • Place PLCs/IIoT on correct VLANs, coordinate addressing and routing with IT. • Validate OPC connectivity inside segmented networks. Monitoring, alarming, and reporting • Configure Ignition and Grafana alerting, escalation, approvals. • Build dashboards and data exports for Quality, Process, Manufacturing, customers. Reliability and change management • Plan and execute upgrades and migrations with downtime plans and rollbacks. • Document designs and RCAs; standardize templates for new lines and plants. Follow standard practices and safety procedures. Strictly adhere to all safety policies and procedures to ensure a safe working environment. COOPERATION • Work within Nammo's cross functional teams including Manufacturing, Quality, Engineer, Controls, and Information Technology • Work with external consultants and resources as needed LEVEL OF DECISION MAKING The Senior SCADA Engineer has responsibility for the OT network and owns the SCADA / MSSQL data collection system. The individual will act as the subject matter expert for Nammo's SCADA and OT systems. SKILLS & QUALIFICATIONS: Required: • Education: Bachelor's degree in Software Engineering, Computer Science, Electrical Engineering, or a related technical field. • 5+ years of experience in a data-driven industrial or manufacturing environment. • Proven experience with Ignition SCADA (or equivalent SCADA systems). • Strong background in SQL Server administration, data modeling, and performance tuning. • Programming proficiency in Python, Java, or C++. • Ability to obtain BATF clearance Preferred: • Experience with Allen-Bradley, Automation direct PLCs • Familiarity with DoD cybersecurity requirements preferred. • Experience with data visualization tools (MS Power BI) is a plus. COMPETENCIES: • Excellent communication and collaboration skills. • Strong problem-solving and critical-thinking abilities. • Ability to work in fast-paced environments. • Leadership or teamwork abilities. • Strong analytical, troubleshooting, and problem-solving abilities. • Excellent communication and documentation skills. • Ability to work both independently and collaboratively across disciplines. • Curious, self-motivated, and driven to continuously improve systems and processes. WORKING CONDITIONS: • Full-time position • On-site • Ability to travel. Expected travel is less than 10% • Ability to stand for prolonged periods

Nammo Defense Systems, Inc., a defense contractor, is the primary USA operation of the Nammo Group (Nammo AS). Nammo Defense Systems Inc. (NDS) develops, manufactures, and supports Shoulder Launched Munitions (SLMs), energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, and composite solutions including carbon fiber tubes and composite aerospace structures. JOB OVERVIEW: We are seeking a Senior SCADA & Data Systems Engineer to join our operations technology team. This role focuses on connecting manufacturing equipment and processes to our enterprise data environment through the Ignition SCADA platform (by Inductive Automation) and SQL databases. In this role you will own our multi-plant SCADA and OT systems. Architect, build, and operate Ignition, OPC, MSSQL, and the supporting server and network stack. Partner with Controls, IT, and Manufacturing to deliver uptime, traceability, and actionable data. How you will be rewarded as our Senior SCADA Systems Engineer - Operational Technology: * Competitive compensation * Monday-Thursday work week working four 10-hour days (off on Fridays) * Generous paid time off and Holiday Pay * Medical, Dental and Vision Insurance * 401(K), employee assistance programs, health savings account KEY RESPONSIBILITIES: SCADA architecture and development * Own Ignition across plants, including primary/secondary and new instances. * Build HMIs for control, labeling, traceability, transaction groups, and tag models. * Integrate via Ignition OPC and Kepware. Server and infrastructure ownership * Operate ~15 production servers: Windows/Linux for Ignition, Kepware/OPC, Python, Node-RED, Grafana. * Patching, upgrades, storage and capacity, backup/restore, incident response. Databases and data engineering * Design schemas and ERDs, stand up and administer SQL Server instances. * Create jobs, maintenance plans, and verified backups; optimize logging pipelines. Controls integration and triage * Work with Controls to diagnose faults, walk ladder logic, trace I/O and comms issues. * Guide fixes that cross PLC logic, OPC, network, and database boundaries. OT networking * Place PLCs/IIoT on correct VLANs, coordinate addressing and routing with IT. * Validate OPC connectivity inside segmented networks. Monitoring, alarming, and reporting * Configure Ignition and Grafana alerting, escalation, approvals. * Build dashboards and data exports for Quality, Process, Manufacturing, customers. Reliability and change management * Plan and execute upgrades and migrations with downtime plans and rollbacks. * Document designs and RCAs; standardize templates for new lines and plants. Follow standard practices and safety procedures. Strictly adhere to all safety policies and procedures to ensure a safe working environment. COOPERATION * Work within Nammo's cross functional teams including Manufacturing, Quality, Engineer, Controls, and Information Technology * Work with external consultants and resources as needed LEVEL OF DECISION MAKING The Senior SCADA Engineer has responsibility for the OT network and owns the SCADA / MSSQL data collection system. The individual will act as the subject matter expert for Nammo's SCADA and OT systems. SKILLS & QUALIFICATIONS: Required: * Education: Bachelor's degree in Software Engineering, Computer Science, Electrical Engineering, or a related technical field. * 5+ years of experience in a data-driven industrial or manufacturing environment. * Proven experience with Ignition SCADA (or equivalent SCADA systems). * Strong background in SQL Server administration, data modeling, and performance tuning. * Programming proficiency in Python, Java, or C++. * Ability to obtain BATF clearance Preferred: * Experience with Allen-Bradley, Automation direct PLCs * Familiarity with DoD cybersecurity requirements preferred. * Experience with data visualization tools (MS Power BI) is a plus. COMPETENCIES: * Excellent communication and collaboration skills. * Strong problem-solving and critical-thinking abilities. * Ability to work in fast-paced environments. * Leadership or teamwork abilities. * Strong analytical, troubleshooting, and problem-solving abilities. * Excellent communication and documentation skills. * Ability to work both independently and collaboratively across disciplines. * Curious, self-motivated, and driven to continuously improve systems and processes. WORKING CONDITIONS: * Full-time position * On-site * Ability to travel. Expected travel is less than 10% * Ability to stand for prolonged periods

Pay: Up to $38/HR D.O.E (Includes $2 Night Differential) Full-Time: 5:00 PM-5:00 AM Schedule: 2-2-3, every other weekend w/3 consecutive days off! This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures Dismantle machines and equipment to gain access to problem areas Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures Inspect and measure parts to detect wear, misalignment, or other problems Remove and/or replace worn or defective parts Other duties as assigned. Qualifications: High School Diploma or GED Preferred Fluency in English; speak, read, and write 2+ years of commercial or industrial maintenance experience or experience in a related field Experience with low and high voltage electrical systems Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs Demonstrated ability to troubleshoot PLCs, I/O and VFDs Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. Must be able to frequently reach up to 31-77 inches. Physical Demands: Regularly lift and/or move up to 25 pounds Frequently lift and/or move up to 50 pounds Occasionally lift and/or move up to 100 pounds Regularly stand; walk; stoop, kneel, crouch, climb, or crawl Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to “treat associates like family and customers like friends.” Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

Role Purpose: This role is critical to our business and designed to support the convergence of the IT/OT infrastructure for Mark Anthony Brewing. The Operational Technology Systems Engineer will be tasked with leveraging expertise in IT and OT to design, deploy, and maintain integrated infrastructure solutions that optimize operational efficiency, enhance system reliability, strengthen cybersecurity defenses, and ensure seamless communications between IT and OT systems. This is aimed at safeguarding critical assets, mitigating cyber threats, and driving business success and innovation Accountabilities & Impact: Implement and maintain secure network architectures that facilitate communication between IT and OT systems while ensuring data integrity. Provide expertise in developing and supporting cybersecurity policies and procedures specific to IT/OT integration, including access controls, authentication mechanisms, and encryption methods Collaborate with cross-functional teams to design and deploy resilient backup and disaster recovery solutions for IT/OT systems Monitor/optimize system performance and troubleshoot issues to optimize operational efficiency. Document system configurations, changes and incidents to maintain a comprehensive record of the integrated infrastructure's state and history Skills & Experience Needed: Bachelors degree in or related to IT or a combination of certifications and work experience. Experience in OT related fields is beneficial. Experience with Cybersecurity. Including best practices and methodologies. Experience administrating a complex manufacturing network infrastructure including Cisco devices, NATs, Palo Alto, Stratix Demonstrated experience commissioning/maintaining/monitoring various servers and services. These include VMware, SQL, AD services, VPN solutions Familiarity with A&C software solutions such as those from Rockwell Automation, Inductive Automation (Ignition), Siemens, etc. At Mark Anthony, we live by our 5 Core Values every day: Sense of Urgency We value sense of urgency because we are a fast-paced company in a fast-paced industry You act as if there is no tomorrow and get it done today Authenticity We value authenticity because we need to stay real You are authentic, diplomatic, respectful, thoughtful and you always have the best intentions Simplicity We value simplicity; why use 50 words when you can use 5? You thrive in ambiguity, are comfortable with change and bring simplicity to complex situations or grey area Humility We value humility; there is no room for egos here You're not stubborn, you listen, take feedback/direction and respond quickly to changing direction. We are a team that supports each other Trust We value trust because unless we are both trusted and trusting, we will not succeed as a team You put trust in others and do your best to never let anyone down At Mark Anthony, we believe every team member shares the responsibility of understanding how each of our roles and actions impact Quality, Food Safety, Safety and Continuous Improvement. This collective mindset is the cornerstone of our success as a leader in the consumer beverage space and requires us to mutually build and improve robust processes that guarantee unmatched customer satisfaction and safety

Job Description Provide direction to manufacturing personnel in order to meet quality, cost and delivery expectations of our customers as well as maintain a clean and organized working environment for our associates. The Process Technician/Lead will accomplish this by consistent application of company policies, procedures and guidelines, communicating manufacturing-related goals and objectives including quality, throughput, customer service, on-time delivery, as well as participation in on-the-job training for associates, disciplinary & attendance tracking. This position is responsible for molding plastic parts in accordance to company requirements and standards. This includes machine set-up, secondary equipment set-up and input process parameters. All associates are expected to perform all activities in a safe manner and to report any safety concerns or injuries immediately. Essential Duties and Responsibilities: Monitor & maintain people requirements/assignments for manufacturing personnel Disposition of attendance & disciplinary issues Communicate with & train production personnel regarding customer & company expectations Facilitate the implementation of corrective action for non-complying products Monitor/track SPC & quality reports for shift Daily Shift Reporting Review, analyze and implement corrective action related to daily manufacturing results Provide direction and review performance of manufacturing personnel Coordinate all manufacturing efforts to meet required production schedule Monitor expense controls and implement corrective action as required Maintain a clean and well-organized work environment Manage the scheduled production at established efficiency and utilization standards and complete daily shift audits Manage the material flow, inventory control, quality program, scrap, safety and cleanliness of the production floor Manage and improve employee engagement Maintain staff by interviewing, selecting, and overseeing training of associates Conduct Performance Reviews Resolve employee issues by analyzing data; investigating issues; identifying solutions; and taking action as appropriate Ensure operators document production by press for your shift and audit the previous shifts prior to entering data for IQMS Set-up the injection mold presses and install molds according to specifications Read specifications and set machine controls, regulating prescribed molding temperature, volume of plastic, molding time and pressure Provide input of injection molding process and equipment for the reduction of defects, overall process improvement and the reduction of downtime Inspect and evaluate parts for quality Communicate and translate what is happening from a molding standpoint to engineers and management Monitor and troubleshoot molding process; observe equipment and materials in process to analyze and determine cause of malfunctions Make adjustments to equipment to obtain desired results Responsible for machine start-ups First response to all machine, robot, thermolater and secondary equipment alarms Ensure machines and robots are running at optimum efficiency Responsible for the accurate completion of Process Verification Troubleshoot machine, mold and material problems Provide mold and fixture preventative maintenance Store and document molds and fixtures Change mold inserts (as equipment requires) Change secondary equipment inserts and nesting Diagnose (troubleshoot) secondary equipment problems Maintain a positive and cooperative attitude with co-workers, employer, customers and suppliers Uphold a strong desire to learn new and changing technologies Perform activities in a safe manner Must know and properly use all aspects of the company LOTO program for an authorized employee Must possess a Cinova Medical issued forklift license. Must understand and be competent in all aspects of QS 9001 and ISO 13485 as it relates to the injection molding process and production activities Must have acceptable attendance record Ability to train subordinate(s) Must attend all mandatory company meetings and safety education sessions Perform any other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 3-5 years experience in a plastics manufacturing environment Experience in 5S, continuous improvement, and Lean Manufacturing processes Strong interpersonal skills with the ability to successfully lead a team and resolve issues relating to personnel, quickly and efficiently Exceptional communication skills Organizational and time management skills Working knowledge of various types of manufacturing machinery and tools Proven problem solving abilities and critical thinking Proficient computer skills Must be fully trained and perform the following duties efficiently within IQMS: Real-Time Production Monitoring Production Reporting Scheduling Shop Calendar Work Centers Verify the job has been downloaded Enter start-up rejects Production monitoring Process monitoring Work Orders monitoring Production Scheduling monitoring Plastic Injection molding background with a minimum of three years of experience in plastics processing A high level of ability to troubleshoot processing problems and make adjustments to make good parts is a requirement Ability to work independently and within a group using good judgment in decision making processes Ability to give proper and accurate instructions as well as receiving input Ability to multi-task, deliver and meet deadlines Strong Mechanical Aptitude and troubleshooting skills Effective oral and written communication with a wide variety of people Understand and follow work rules Reading, writing, and basic math functions, i.e. addition, subtraction, multiplication, division and percentages Education/Experience: High School Diploma or GED Knowledge and experience in production and manufacturing processes and techniques Knowledge of quality systems and standards, including ISO-9001 and/or ISO-13485 Knowledge of health and safety standards and compliance Knowledge of computers and working within IQMS 3-5 years of plastic injection molding experience Full understanding of injection molding and molding principals Knowledge of computers and working within IQMS Knowledge of injection molding process Scientific molding experience is a plus Language Ability: Ability to read, write, understand and follow instructions in the English language. Effective oral and written communication in the English language. Certificates and Licenses: Forklift Certification Lockout/Tagout Certification Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical machine shop environment, requiring safety glasses and steel-toed boots. Employees are required to follow company policies and procedures (located in the company handbook) related to proper dress attire and safety. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Standing and walking for periods of eight hours at a time Reaching, feeling, handling, grasping, twisting and turning Feeling part inconsistencies and variances by touch; using your fingers Lifting, carrying, pushing and or pulling heavy objects, no limit on weight but most use good judgment on how things are moved and what assisted means are utilized Ability to distinguish colors and shading If the associate requires corrective vision lenses, they must have and use them to be able to perform the part quality inspections Good communication skills with the ability to speak and perceive others clearly Job Type: Full Time **This is a 2nd shift position (hours are 3:00pm-11:30pm) Monday through Friday** Benefits: Medical; Dental; Vision; Life; STD; LTD; 401(k) with company match; Paid Time Off; Paid Sick Time Cinova Medical, Inc. is an Equal Opportunity Employer and a Drug Free Workplace. Upon hire, Cinova Medical, Inc. uses E-Verify to verify employment eligibility for roles based in the United States.

At Caris, we understand that cancer is an ugly word-a word no one wants to hear, but one that connects us all. That's why we're not just transforming cancer care-we're changing lives. We introduced precision medicine to the world and built an industry around the idea that every patient deserves answers as unique as their DNA. Backed by cutting-edge molecular science and AI, we ask ourselves every day: “What would I do if this patient were my mom?” That question drives everything we do. But our mission doesn't stop with cancer. We're pushing the frontiers of medicine and leading a revolution in healthcare-driven by innovation, compassion, and purpose. Join us in our mission to improve the human condition across multiple diseases. If you're passionate about meaningful work and want to be part of something bigger than yourself, Caris is where your impact begins. Position Summary The Equipment Engineering Technician installs, maintains, and repairs equipment, performs routine checks, and troubleshoots technical issues to ensure optimal performance and safety. This position is also responsible for assisting in company-wide compliance to all applicable regulatory requirements and assisting with the day-to-day operations of the laboratory's equipment calibration and maintenance program. Job Responsibilities Maintain compliance to all applicable regulatory requirements (CLIA, NYS, CAP, ISO, FDA, IVDD, etc.) with regards to laboratory instrumentation calibration and maintenance. Collaborate with cross-functional teams to achieve defined business objectives. Manage company records in accordance with regulatory requirements and company policies. Coordinate with approved vendors and laboratory staff to coordinate equipment calibrations, preventative maintenance, and repairs. Perform equipment repairs, calibrations, and preventative maintenance, as required. Use problem solving skills to identify, solve problems, or improve processes. Author, review, revise, and implement standard operating procedures (SOPs) for the QMS. Participate in internal and external audits with tasks such as audit preparation, answering questions, and providing documentation to auditors. Train new hires/other team members on analyst job functions. Manage equipment projects such as SOP revisions, implementation of new processes, and management of the pipette program. Required Qualifications Three years of experience working in a regulated environment (CAP, CLIA, NYS, FDA, ISO, etc.) or Bachelor's degree in a biological science, engineering, or similar field. Proficient in Microsoft Office Suite, specifically Word, Excel, Outlook, and general working knowledge of Internet for business use. Preferred Qualifications Bachelor's degree and three years of experience working in a quality role within regulated laboratory environment. A certification by the American Society for Quality (ASQ) or equivalent. Previous experience in a laboratory (next generation sequencing or related field) or quality assurance role is preferred. Physical Demands Employee may be required to lift routine office supplies and/or laboratory equipment. Employee must be able to use standard office equipment. While the majority of work is performed in a desk/office environment, employee may be required to spend time in the laboratory and may have exposure to high noise levels, fumes, and biohazardous materials. Employee must have ability to sit for extended periods of time Training All job specific, safety, and compliance training are assigned based on the job functions associated with this employee. Other This position requires periodic travel and some evenings, weekends, and/or holidays Conditions of Employment: Individual must successfully complete pre-employment process, which includes criminal background check, drug screening, credit check ( applicable for certain positions) and reference verification. This reflects management's assignment of essential functions. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Caris Life Sciences is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, gender, gender identity, sexual orientation, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Work Schedule: Tuesday to Saturday, 1:00 PM to 9:30 PM. A shift differential will be provided. This position is responsible for maintaining electrical and mechanical systems on all automation equipment. (S)he will be responsible for troubleshooting electrical and mechanical problems and implementing corrective and preventative measures. Follow all required work safe practices. This would include compliance with Good Manufacturing Practices, wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Essential Duties: * Repair and maintain a variety of equipment and perform preventative maintenance on distribution center and/or manufacturing equipment * Use diagnostic equipment to troubleshoot, analyze and predict upcoming failures * Dismantle machines and equipment to gain access to problem areas * Operate metalworking machines such as bench lathes, milling machines, punch presses, and drive presses to fabricate housings, fittings, jogs and fixtures * Inspect and measure parts to detect wear, misalignment, or other problems * Remove and/or replace worn or defective parts * Other duties as assigned. Qualifications: * High School Diploma or GED preferred * 1+ years of commercial or industrial maintenance experience or experience in a related field * Experience with low and high voltage electrical systems * Demonstrated understanding of operating principles of frequency drives, servos, electrical and PLCs * Must be flexible and willing to work the demands of the department which may be subject to evenings, weekends and holidays. * Must be able to frequently reach up to 31-77 inches. Physical Demands: * Regularly lift and/or move up to 25 pounds * Frequently lift and/or move up to 50 pounds * Occasionally lift and/or move up to 100 pounds * Regularly stand; walk; stoop, kneel, crouch, climb, or crawl * Ability to reach and handle objects, tools, or controls Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to "treat associates like family and customers like friends." Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

The Autonomous Test Technician plays a crucial role in supporting test operations by setting up fixtures, components, and machines for engineering tests needed for the development or evaluation of components, systems, and machines. The technician also participates in the construction and maintenance of test roads. Responsibilities * Set up fixtures, components, and machines for engineering tests. * Participate in the construction and maintenance of test roads. * Assemble and disassemble machines. * Diagnose and repair electrical system failures on machines. Essential Skills * Strong mechanical skills. * Experience as a diesel mechanic. * Ability to troubleshoot engineering issues. Additional Skills & Qualifications * Associate's degree in a relevant technical field such as Maintenance or Mechanical Engineering, or equivalent knowledge and experience. * Previous experience in construction or mining maintenance is preferred. * Experience operating haul trucks, loaders, dozers, graders, and/or other equipment is required. Work Environment The work is conducted at the proving grounds located in Green Valley. This large facility houses several large mining trucks. The environment offers opportunities to learn and grow within the field of large mining equipment. Job Type & Location This is a Contract to Hire position based out of Sahuarita, AZ. Pay and Benefits The pay range for this position is $30.00 - $34.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Sahuarita,AZ. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Sub-Zero, Wolf, and Cove the leading manufacturer of luxury kitchen appliances is a longstanding, family-owned company in the Goodyear area. Icons of design and paragons of performance and quality, Sub-Zero, Wolf, and Cove are the refrigeration, cooking, and dishwashing specialists found in world's most luxurious homes. We look for team members who are driven by innovation and excellence, striving to serve our customers by doing what is right-with integrity, teamwork, and accountability. Growth and development are important aspects of this position. Whether you aspire to be a leader or a technical expert, this position will set you up for success in the future. The Sheet Metal Fabrication Technician position we are looking to fill has a strong emphasis on fabrication within our manufacturing environment. This includes exposure to new technologies and automated equipment which create opportunities for developing new technical skills. This position would be working in a hands-on manufacturing environment where safety & quality are of upmost importance. Individuals in this role can expect to work amongst various disciplines of Engineers, Maintenance and Operations in our manufacturing atmosphere. Job responsibilities include, but are not limited to the following: Possess the desire and the skills to learn about variety of fabrication equipment and processes. Develop and utilize advanced troubleshooting and mechanical skills to support maintenance and fabrication engineering teams. Troubleshoot Equipment and Processes to determine true root cause and implement permanent corrective action on equipment such as brake presses, custom automated coil-fed equipment, CNC punching and laser cutting machines. Work collaboratively with Maintenance, Engineering, and Operations on equipment downtime improvements and preventative maintenance. Assist with Engineering Changes by processing First Article Inspections. Ensure safety throughout manufacturing practices, procedures and equipment. Work on continuous improvement projects to achieve optimum quality, delivery, and cost metrics. Ability to prioritize and complete tasks and support production needs with limited support. We value our employees by providing: Competitive compensation based on skills Industry leading health, dental, and vision plans Generous 401 (K) savings and profit sharing Education assistance and internal training programs Electric vehicle charging Maternity & paternity leave Interested in learning more on our robust benefits package we offer? Click here! This position requires a pre-employment drug/alcohol test and background check, which will be administered after a conditional job offer is extended. A negative drug/alcohol test result is required for employment. Refusal to take the test or a positive result may disqualify a candidate from further consideration. All drug testing will be conducted in accordance with federal and state laws.

C.E. Precision Assemblies, a Trexon company, seeks a dedicated Manufacturing Engineer Technician for its Chandler, AZ location. This role offers opportunities for professional growth, and advancement within our dynamic organization. As a Manufacturing Engineer Technician, you will tackle a diverse array of complex and detail orientated tasks and projects that support our staff/company. The successful candidate should possess strong attention to detail, a “Do it Right the First Time” mentality, and the willingness to learn new processes. They will foster a collaborative team environment while demonstrating the ability to assess and enhance existing processes. Weekly Schedule: Full Time, Monday - Friday 6am-2:30pm (overtime as required) Pay: DOE Specific Position Duties: Identify and troubleshoot process, material or equipment problems to minimize down time and recommend solutions to Manufacturing Engineering. Develop, assemble, procure or modify existing and new tooling, fixtures and equipment to ensure efficient production methods. Process customer drawing Engineering Change Notices and initiate/process internal CEPA ECOs accordingly. Complete time studies to quantify processing times and identify areas for process improvements. Assist with hands on training of manufacturing employees on new products, tooling equipment and process revisions. Assist in failure analysis. Troubleshooting, rework/repair of nonconforming product to determine root cause. Promote and support lean manufacturing and continuous improvement activities in Manufacturing. Identify and document Visual Assembly Instructions to help standardize Manufacturing processes for future product builds. Create internal Bill of Materials, Labor Plans and Marking Documents according to customer documentation. Perform Document Control duties in maintaining internal CEPA and customer documentation. Interpret customer drawing requirements/criteria and providing direction/clarification to Manufacturing Technicians, Leads and Supervisor. Minimum Qualifications: 5 years of experience in manufacturing with increasing roles in technical support. Proficient in Microsoft Outlook, and Excel Strong Analytical and problem-solving skills and attention to detail Excellent communication and interpersonal skills, with the ability to collaborate effectively across the department Demonstrated ability to manage multiple priorities and meet deadlines in a fast-paced environment High level of integrity A “Do it Right the First Time” mentality Physical Requirements: Ability to sit and use a computer for extended periods Must be able to effectively use standard office equipment such as computers, printers and telephones Ability to communicate verbally and in writing with team members, other departments, customers and suppliers. Must be authorized to work in the U.S. About C.E. Precision Assemblies: Since its start in 1986, C.E. Precision Assemblies has grown into an award-winning Facility. The products we offer span a wide range of Military and Aerospace applications. We offer products for applications such as: Military Aerospace Satellite components Missile defense Communication Systems And More..... C.E. Precision Assemblies LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.