Engineering technician jobs in Waltham, MA - 1,062 jobs

Engineering Technician - Medical Device R&D temp to perm Marlboro, MA Support engineers in the development and testing of single-use medical devices. This hands-on role involves working with Engineers testing prototypes, performing validation and system testing, and accurately documenting results in a regulated environment. Responsibilities Perform validation, strength, and system testing on medical devices Work with tubing and small mechanical components Set up and maintain test equipment; perform basic troubleshooting Document test results and communicate findings to engineers Support calibration and quality documentation requirements Qualifications Associate degree or equivalent hands-on experience 1+ year experience in technical, lab, R&D, or manufacturing role Strong mechanical aptitude and troubleshooting skills Ability to follow procedures and document work accurately Medical device or regulated environment experience preferred.

Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess' patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world. Responsibilities Perform cGMP manufacturing operations according to documented procedures or batch records Operate automated manufacturing equipment and record relevant in-process data. Complete production and testing records following Good Documentation Practices (GDP) Handle, assemble, and visually inspect products, including use of a microscope, automated inspection systems, or other optical systems. Contribute to root cause analysis (RCA) and help contribute to manufacturing investigations Support manufacturing related R&D efforts as needed Perform other assigned duties related to manufacturing, quality control, and/or facility operations. Qualifications 2 + years' relevant experience working in regulated environments in medical device or biopharmaceutical industries; experience working in a clean room is preferred High school diploma minimal, associate's degree or trade certifications preferred Good written and verbal communication skills, attention to detail, and a demonstrated ability to work effectively within a team Ability to stand or sit for a full shift on a manufacturing line Entrepreneurial spirit and drive to positively impact global human health At Vaxess, we're bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to ****************** .

RCS Staffing has an immediate need for a CAD Tech I in Mansfield, MA 02048. This is a full time, contract to hire, onsite assignment with our client. Overview of YOUR role as a CAD Tech I RCS is seeking an entry-level CAD Tech I to join our client's team in Mansfield, MA. This position offers a great opportunity for individuals looking to launch their CAD Drafter career in a hands-on, fast-paced environment. As a CAD Tech I YOU will: • Receive and complete support assignments under the supervision of a QC Specialist • Participate in on-the-job training during the first 1-2 weeks to learn necessary tools and systems • Collaborate with team members to ensure quality and consistency in support services • Adapt to a fast-paced work environment and meet service deadlines • Work on-site from Monday to Friday, 7:30 AM to 4:00 PM You are the ideal CAD Tech I candidate if you have: • High School diploma or completed GED • Experience with or strong interest in learning design systems and support tools • A desire to work in a support-focused design or engineering role long-term • A willingness to learn new technologies and processes • The ability to work in a fast-paced environment It's a BONUS if you have: • An Associate's Degree or certificate in Information Technology or a related field • Experience with CAD software or ESRI ArcGIS (if support includes these platforms) About Our CLIENT Our Client performs distribution, transmission and substation construction services and conducts turnkey engineering-construction projects for utilities, electric cooperatives and municipalities of all sizes across the country. In addition, they are a leader in storm restoration and offer gas distribution services. They are known for their relentless commitment to safety, exceptional customer service, operational excellence and a strong focus on our employees' continued development. With over 75 years of experience, they have long-standing relationships with our customers from utilities, electric cooperatives and municipalities. Who We Are RCS Staffing is a certified Women-Owned Small Business (WOSB) specializing in the recruitment of professionals for best-of-class companies throughout the United States. Since 1994, RCS recruits top talent for direct hire, temp-to-perm and contract staffing positions and provides customized payroll services. Our Recruiting Specialties consist of all Engineering Disciplines, Project Management, Project Controls, Information Technology, Energy Efficiency and Business Professionals. RCS is an equal opportunity employer that prohibits discrimination and harassment of any type. RCS recruits, hires, and promotes for all positions without regard to race, color, religion, creed, national origin, citizenship status, disability, military status, veteran status, marital status, sexual orientation, gender identity, sex, genetic information or age. All terms and conditions of employment such as compensation, benefits, work assignment, availability of facilities and privileges of employment are administered on the same basis of equality.

Riley Power group, LLC is a full-service maintenance and capital construction services company headquartered in Rock Hill, SC. We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial, power generation, and defense sectors. We are currently hiring a skilled I&C Techician. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! This position could be located anywhere nationwide. It all depends on where the client's needs are located. Essential Function of this position may include but is not limited to: Responsible for the maintenance, inspection, troubleshooting, repair, calibration and testing of power plant instrumentation and control equipment. Must be able to read and understand drawings/prints, manuals, and procedures. Basic duties include troubleshoot instrumentation and control system (such as instrument loops, electronic control systems and equipment) to determine operational problems, follow any applicable administrative procedures, perform tests of loops, evaluate data, and recommend actions to take. Calibrate equipments/devices/components to meet technical and manufacturing specifications. Repair I&C systems and equipment according to appropriate control procedures to return equipment to service. Document all system and equipment repairs. Perform preventative maintenance on I&C systems and equipment. Perform independent and component verification, which includes review of work requests, flow diagrams and procedures. Qualification, education, and experience requirements: 5 years working experience in instrumentation and control and electrical maintenance. High school diploma or equivalent or Associate degree or higher in electronics, engineering technology, instrumentation, or related field. Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to; practical and written skills assessments, computer-based-training, medical, psychological, background and substance abuse screening(s).

At EY, we're all in to shape your future with confidence. We'll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to goengd. Join EY and help to build a better working world. The opportunity The Digital Certificates Technology Service (DCTS) team within the Information Security organization at EY is responsible for the engineering, development, and sustainment of digital certificate-based security solutions and encryption technologies that service the global firm. The Public Key Infrastructure (PKI) Engineering Lead drives Information Technologies (IT) security and productivity pillars altri via enabling secure connectivity for technical assets and devices within EY's global infrastructure through the creation and management of digital certificates. The role drives complex engineering design, development, and implementation activities to provide full certificate lifecycle management solutions aligned to multiple digital certificate use cases including Transport Layer Security (TLS), Code Signing, Authentication of User and Devices, and Email Encryption. The as deployed services rely on several technologies including, but not limited to, Microsoft's Public Key Infrastructure (PKI), Online Certificate Status Protocol (OCSP) infrastructure, Hardware Security Modules (HSM), KeyFactor Command, Venafi Trust Protection Platformhelmet, Intune Certificate Connector and JAMF ADCS. The Engineering Lead will oversee a team of engineering resources and manage all activities to be delivered by this team. The role serves as a bridge between the business, solution architecture design and IT operations stakeholders to ensure sustainment of the deployed services to meet all security, functional, and operational requirements and maintain the highest degree of service uptime as required by the business. Your key responsibilities Primary point of contact for the strategy and best practices in engineering, design execution and aligned management of all complex build activities for specific new or modifications Leading existing features and functions within the DCT services space. Manage the successful technical delivery of projects and services for our customers by working directly with key business stakeholders, executives and project teams. Securityardiers are the technical lead on initiatives and as such must drive the vision and alignment of the solution delivery. Direct engineering and other technical activities supporting the scalability, supportability, production design, validation testing, release packaging, and release planning to maintain service stability and continuity. Act as a product owner for deployed services to manage the vendor technologies and underlying infrastructure components including development and maintenance of product roadmaps aligned with each service offering. Support the definition, design, and deployment of enterprise PKI systems to provide new or enhanced services for the business. Maintain existing deployed service components including upgradesίων maintenance, and issue resolution. Manage the configuration of PKI systems and develop and execute test plans to ensure readiness for production deployment. Create and maintain system documentation. Ensure PKI systems align to the security policies, standards, and industry practice. Manage direct reports, identifies and recommends hiring and aligns responsibilities and objectives to abilities as well as coach performance to achieve success. Skills and attributes for success Excellent problem-solving skills. Strong verbal and written skills to interact with global teams and customers. Up to date on current technologies and standards, and maintain awareness of industry trends and threats, focusing on PKI/PKE technologies. Solid understanding of IT security principals and secure coding techniques. Team leadership and resource management skills. Strong experience in Public Key Infrastructure (PKI). Experience with CyberArc/Venafi certificate management suite. Experience with Codesigning. Strong proficiency with Hardware Security Module (HSM) technology (SafeNet/nCipher). PowerShell Scripting & general understanding of REST API. Experience in cloud solution development with Azure or AWS architectures as it related to PKI management. To qualify for the role, you must have Education: Bachelor's or master's degree in information assurance, computer science, information systems or related field of study. Experience: 12+ years of practical experience in the field of IT; 8+ years of direct Information Security experience; बै 6+ years of hands-on PKI engineering experience. What we offer you The compensation ranges below are provided in order to comply with United States pay transparency laws. Other geographies will follow their local salary guidelines, which may not be a direct conversion of published US salary ranges. At EY, we'll develop you with future-focused skills and equip you with world-class experiences. We'll empower you in a flexible environment, and fuel you and your extraordinary talents in a diverse and inclusive culture of globally connected teams. Learn more. We offer a comprehensive compensation and benefits package where you'll be rewarded based on your performance and recognized for the value you bring to the business. The base salary range for this job in all geographic locations in the US is $128,100 to $239,600. The base salary range for New York City Metro Area, Washington State and California (excluding Sacramento) is $153,800 to $272,300. Individual salaries within those ranges are determined through a wide variety of factors including but not limited to education, experience, knowledge, skills and geography. In addition, our Total Rewards package includes medical and dental coverage, pension and 401(k) plans, and a wide range of paid time off options. Join us in our team-led and leader-enabled hybrid model. Our expectation is for most people in external, client serving roles to work together in person 40-60% of the timeirth of an engagement, project or year. Under our flexible vacation policy, you'll decide how much vacation time you need based on your own personal circumstances. You'll also be granted time off for designated EY Paid Holidays, Winter/Summer breaks, Personal/Family Care, and other leaves of absence when needed to support your physical, financial, and emotional well‑being. Are you ready to shape your future with confidence? Apply today. EY accepts applications for this position on an on‑going basis. For those living in California, please click here for additional information. EY focuses on high‑ethical standards and integrity among its employees and expects all candidates to demonstrate these qualities. مڪمل EY provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, genetic information, national origin, protected veteran status, disability status, or any other legally лек protected basis, including arrest and conviction records, in accordance with applicable law. EY is committed to providing reasonable accommodation to qualified individuals with disabilities including veterans with disabilities. If you have a disability and either need assistance applying online or need to request an accommodation during any part of the application process, please call 1-800-EY-HELP3, select Option 2 for candidate related inquiries, then select Option 1 for candidate queries and finally select Option 2 for candidates with an inquiry which will route you to EY's Talent Shared Services Team (TSS) or email the TSS at **************************. #J-18808-Ljbffr

A leading investment firm in Boston is looking for a Principal Front-Office Engineer to drive the design and implementation of applications for market analysis. You will work closely with portfolio analysts and traders, focusing on building robust systems that enhance investment decisions. The ideal candidate has over 5 years of experience in Python development and strong skills in financial data manipulation. This position offers a hybrid work arrangement, with 2 days in the office per week. #J-18808-Ljbffr

Adecco Staffing is searching for a qualified Manufacturing Technician! This is a temp to potential hire opportunity in Devens. Hours: 7:00AM-3:30PM, Monday-Friday Pay: $32-$36/hour DOE The Manufacturing Engineering Technician supports Manufacturing Engineers by performing technical tasks related to design, testing, assembly, DOE and maintenance of equipment/systems. This role involves hands-on work with process optimization, mechanical, electrical, troubleshooting issues, and ensuring compliance with safety and quality standards. Job Duties: Assist Engineers in the design, development, and testing of Watson Marlow products. Perform assembly, calibration, and maintenance of equipment. Conduct inspections and quality checks to ensure compliance with specifications. Troubleshoot and repair mechanical or electrical issues. Collect and analyze data from tests and prepare detailed reports. Maintain accurate documentation of work performed and results. Ensure adherence to safety protocols and company standards. Collaborate with cross-functional teams to support project goals. Requirements: Associate degree in Engineering Technology (Manufacturing, Mechanical or Electrical) or equivalent US Military experience/training. Strong understanding of mechanical drawings, electrical, or electronic systems. Proficiency with tools, instruments, and diagnostic equipment. Ability to read and interpret technical drawings and schematics. Excellent problem-solving and analytical skills. Strong attention to detail and organizational skills. Effective communication and teamwork abilities. Experience analyzing production assembly and test equipment and processes and documenting modifications. Six Sigma Yellow Belt preferred. 5-10 years of experience in manufacturing engineering or equivalent experience. If you are interested & qualified, please apply with your updated resume! Pay Details: $32.00 to $36.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Title: QC Equipment Technician Employment Type: Contract Duration: 6+ months Status: Accepting Candidates About the role Support a regulated laboratory or manufacturing team by ensuring equipment operates reliably, efficiently, and in compliance with quality standards. Key Responsibilities Investigate and resolve issues related to equipment failures, system deficiencies, deviations, and troubleshooting activities Author and support quality system records, including deviations, change controls, and CAPAs, as required Monitor and coordinate equipment lifecycle activities, including acquisition, qualification/validation, implementation, and decommissioning Track and communicate equipment timelines using project management tools Ensure equipment documentation complies with cGMP, GDP, and data integrity requirements Qualifications BS degree with a minimum of 3 years of relevant experience, or 3+ years of experience in a GMP laboratory setting Demonstrated ability to quickly learn and apply GxP principles Strong attention to detail and documentation practices Experience supporting regulated laboratory or manufacturing equipment preferred Compensation (MA Pay Transparency) Estimated hourly range: $30-$35/hour (W-2) Final rate within this range will be based on skills, experience, and interview outcomes

Are you ready to build America's energy future? Form Energy is an American manufacturing and energy technology company. We're revolutionizing energy storage with cost-effective, multi-day technology designed to keep the electric grid secure and reliable, even during extended periods of stress. By strengthening the electric system and reimagining what's possible, we're giving clean energy a whole new form! In recent years, Form Energy has earned a number of accolades, including being named by TIME as a "Best Invention", MIT Technology Review as a "Top Climate Tech Company To Watch", and Fast Company as "One of the Next Big Things In Tech". We are making rapid progress on our mission of delivering energy storage for a better world, and our team is growing just as rapidly to meet demand. We have signed contracts with leading electric utilities across the United States and production of our iron-air batteries is underway at our first high-volume manufacturing facility in West Virginia. Working for Form Energy is more than just a job, it's a chance to be part of something extraordinary. And now - right as we significantly scale up battery manufacturing - might be the most exciting moment in the company's history to join. We are assembling a team of highly talented and driven individuals across the country. Driven by our core values of humanity, excellence, and creativity, our team is determined to deliver on our mission and transform the energy landscape for the better. Feeling energized to make a meaningful impact on the world? Then keep reading - you've come to the right place. Role Description Form Energy is seeking a Failure Analysis Technician to support critical lab activities that enhance the robustness and reliability of our iron-air battery products. As part of the Reliability Engineering Team, you will contribute to failure analysis efforts through battery cell teardowns, failure data collection, and post-teardown sample preparation and processing. This role requires hands-on work in the lab and close collaboration with a cross-functional team to ensure high-quality failure data documentation. This is an exciting opportunity to help shape and be part of the growth of a fast-moving company with breakthrough technology and an incredible mission! What you'll do: Conduct hands-on lab work, utilizing a variety of handheld power tools to disassemble cycled battery cells and support failure analysis. Collaborate closely with engineers to inspect electrode components during teardown, and document teardown observations and record failure modes for battery product design and build improvements. Prepare post-teardown electrode samples using machine tools and perform sample processing in a wet lab environment for material characterization essential to failure analysis. Maintain lab tools and equipment, ensure an organized and efficient workplace, and be a champion for safety in the lab. Improve cell teardown processes by prototyping and fixture design. Write and maintain SOPs. What you'll bring: 4+ years experience as an engineering technician or an associated degree in an engineering field Demonstrate attention to detail in documentation and execution of tasks Strong teamwork skills and collaborative mindset Experience in using and maintaining handheld power tools and lab instruments Ability to lift up to 30 lbs Comfortable working with chemicals and wearing personal protective equipment (PPE) Proficient in Microsoft Suite and Google Suite and their cloud-based software products Prototyping and CAD design experience is a plus Experience as a car/bike mechanic or with home repair projects is a plus Experience using Jira, Quickbase and/or Slack is a plus A positive, solution-oriented mindset with a drive to get things done! #LI-Onsite #LI-AB1 Humanity is a cornerstone of Form Energy's culture, and we make sure our compensation and benefits reflect that. Form Energy offers competitive salaries, stock options, and a holistic benefits package to ensure all employees have what they need to thrive while working here. When it comes to you and your family's health, we cover 100% of medical, dental, and vision premiums for full-time employees - and 80% of healthcare premiums for dependents. This starts from day one. We also offer at least 12 weeks of paid leave for new parents (up to 20 weeks for birthing parents), and generous vacation policies to give employees time to recharge when needed. To build America's energy future, we need everyone at the table. We are proud to be an equal opportunity employer, and encourage candidates from all backgrounds to apply to our open jobs. If you may require reasonable accommodations to participate in our interview process, please contact . Requests for accommodations will be treated with discretion. Form Energy is committed to maintaining the privacy of our applicants. Please be aware that we will never solicit sensitive personal information such as Social Security numbers or bank account details during the recruiting or hiring process.

Experience level: All Experience Level Experience required: 3 Years Education level: High school or equivalent Job function: Manufacturing Industry: Aviation & Aerospace Visa sponsorship eligibility: No We are seeking an Electronics Technician for a manufacturing company in Acton, MA. This role is a hands-on electronics technician position responsible for assembling, testing, and troubleshooting electrical assemblies and components. Responsibilities Assemble and terminate a wide range of cable and wire harness configurations used in electronic test equipment Build, install, and integrate electronic components and subassemblies by following clear, detailed work instructions Interpret part numbers, procedure books, and kit-based documentation to complete assemblies accurately and efficiently Perform precise crimping, stripping, connector assembly, and light mechanical integration using standard hand tools Execute electrical testing, verification, and basic calibration using digital multimeters and related test equipment Support troubleshooting efforts to confirm proper functionality and ensure all assemblies meet quality specifications Operate independently while collaborating effectively within a small, highly supportive technical team Maintain an organized, safety-focused work environment and adhere to all production and documentation standards This is a Direct Hire position. The hours are Mon-Fri 7AM-3PM. The pay Depend on Experience. Benefits Competitive salary Comprehensive health, dental, and vision insurance Paid time off and holidays 401(k) with company match Opportunities for professional growth and advancement

advertised has been exempted from the federal civilian hiring freeze. At the FBI, we don't just hire talent-we build it from the ground up. We employ individuals who are not only ready to enhance their electronics proficiency but also looking to contribute effectively to their teams. The electronics technician role is crucial. You'll be responsible for diagnosing and resolving issues, setting up new systems, making improvements, and ensuring the proper functioning of intricate electronic systems. Your expertise extends to a wide range of interconnected subsystems, such as electronic warfare technologies, network systems, locks, alarms, and surveillance equipment deployed in various settings, including offices and vehicles. When urgent investigations demand immediate assistance, electronics technicians are there to provide their invaluable support to special agents. You excel at troubleshooting, using your problem-solving abilities to conduct maintenance and repairs and operate a variety of test equipment, both standard and specialized. From installation to maintenance and operational testing, you are adept at every phase, always striving to outpace emerging threats by pushing the boundaries of your skills in technology and network optimization. With the FBI's specialized training and professional development courses, working at the Bureau will help you become more efficient, improve your skill set, and advance your career -all while making a significant impact on national security. Set yourself apart. Apply today. HOW TO APPLY STEP 1: Click on the “Apply” button to be directed to the FBIJobs Careers website. STEP 2: Click the “Start” button to begin. You will be prompted to either sign in to continue or register with FBIJobs if you don't already have an account. STEP 3: Follow the step-by-step process to submit your interest. You will be guided through each step. You must complete all sections of the form AND ALL REQUIRED DOCUMENTS MUST BE ATTACHED to successfully submit your interest. Your resume, specifically noting relevant work experience and associated start and end dates. Other supporting documents: College transcripts, if qualifying based on education or if there is a positive education requirement. Veterans: DD 214; Disabled Veterans: DD 214, SF-15, and VA letter dated 1991 or later. Please see instructions on the site for attaching documents. SALARY LEVEL Pay level for this position: GS 7-9: $42,679.00-$67,865.00 Salary shown is the base salary for the grade levels. Salary is also commensurate with professional experience. MAJOR DUTIES Perform installation, maintenance, and operational testing required to maintain the Bureau's communication and intrusion systems in optimal condition. Perform maintenance and service functions required to obtain optimal operational capability of a wide variety of complex equipment incorporated into FM radio, radio teletype, secure telephone, data and teletype, and intrusion systems. Use test equipment and advanced techniques to perform installation, maintenance, and repair tasks as well as operational testing of the FM radio system (base stations, repeaters, remote and mobile transmitters/receivers, and personal equipment). Conduct preventive maintenance by regularly inspecting and testing equipment for reliability and accuracy to prevent breakdown. Perform corrective maintenance to restore systems that are out of operating condition through extensive analytical testing and take positive action to replace or repair deficient or malfunctioning components and units. Review pertinent technical manuals, remain current with technology, and be available to attend government-sponsored training classes. SPECIALIZED EXPERIENCE GS-7: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-5 grade level. SE is defined as follows: Assisted with the physical installation and maintenance of electronic communication systems. Conducted routine equipment tests; performed basic corrections and/or replacing defective parts. Handled, stored, and inventoried a variety of electronic equipment and components. GS-9: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-7 grade level. SE is defined as follows: In addition to the above: Performed physical installation, maintenance, and troubleshooting of electronic communication systems. Performed installations and preventive and corrective (or emergency) maintenance and service work on FM radio systems, data networks, or electronic physical security systems. Inspected equipment for adherence to standards and tolerances. KEY REQUIREMENTS Must be a U.S. citizen. Must have (or be able to obtain) a valid driver's license. Must be able to obtain a Top Secret Sensitive Compartmented Information (SCI) Clearance. Must be willing to travel as required. Must meet the FBI's Employment Eligibility requirements. EDUCATION AND EXPERIENTIAL REQUIREMENTS EDUCATION Candidates must have a bachelor's degree or higher from a U.S. accredited college or university in one of the following fields: Electronics Engineering, Electrical Engineering, Electronics Engineering Technology, Electronics Technology, Networking, Telecommunications, or Computer Science. Education may be substituted for specialized experience (SE) as follows: GS-7: Applicant must have a bachelor's degree with superior academic achievement or one full year of graduate-level education. Superior academic achievement is the completion of all the requirements of a bachelor's degree from an accredited college or Electronics Technician, DC1 1/15/26 4 of 4 university, which is based on (1) class standing, (2) grade-point average of 3.0 or higher as recorded on an official transcript or as based on courses completed during the final two years of the curriculum, or (3) honor society membership. GS-9:Applicant must have a master's or equivalent graduate degree OR two full years of progressively higher-level graduate education leading to such a degree (or LLB or JD, if related). All degrees must be verified by submitting college transcripts. The FBI is an Equal Opportunity Employer, and all qualified applicants will receive consideration for this vacancy. Unless explicitly authorized by law, selection will be made without regard to, and there will be no discrimination because of, color, race, religion, national origin, marital status, parental status, physical or mental disability, genetic information, age (40 or over), sex, pregnancy and related conditions, or on the basis of personal favoritism, or any other non-merit factors.

Job Title: AI Engineer Trainee Type: Full-Time / Unpaid Trainee Program Company: FocusKPI Please submit your resume and a brief cover letter outlining your experience with relevant projects, coursework/work experience, and why youre interested in this role to ***************** . We are excited to invite aspiring software engineers and AI enthusiasts to join our 3-month AI Trainee Program, designed to fast-track your skills in building and implementing AI solutions. This program provides hands-on experience with real-world projects, enabling you to enhance both your software engineering and AI expertise. Under the mentorship of our experienced team, youll refine your skills in designing scalable systems, deploying machine learning (ML) models, and building APIs. Exceptional performance during the program may lead to a paid internship opportunity, setting the stage for a promising career in AI and software development. About the Program: This program is ideal for individuals passionate about AI and software engineering, particularly in Natural Language Processing (NLP), Retrieval-Augmented Generation (RAG), and software deployment. Youll gain practical experience in building and deploying machine learning models, integrating them into vector-based solutions, and creating robust software infrastructure for scalable applications. The program focuses on your growth, providing you with the tools and knowledge to succeed in the dynamic field of AI-driven software development. Ideal Qualifications: We welcome candidates with the following background: Bachelors or Masters degree in Computer Science, Data Science, or related fields. Interest and hands-on experience with NLP, RAG, and machine learning frameworks. Proficiency in Python and API development using frameworks like FastAPI. Strong problem-solving skills and a detail-oriented approach to software development. Key Learning Opportunities: Gain hands-on experience in designing and implementing NLP models for tasks such as text classification, sentiment analysis, and named entity recognition. Learn and apply Retrieval-Augmented Generation (RAG) frameworks integrated with vector-based solutions to enhance system performance. Build and maintain scalable APIs (e.g., using FastAPI) for real-world deployment of AI models. Develop expertise in containerization tools like Docker to streamline deployment and scalability. Gain practical experience in implementing CI/CD pipelines for automated testing, integration, and deployment to ensure reliable and efficient delivery of AI solutions. Acquire practical knowledge in data preprocessing, feature extraction, and building robust data pipelines for large-scale applications. Work on integrating ML models into end-to-end production systems, focusing on scalability and performance. Strengthen your software engineering skills, with exposure to tools like Python, FastAPI, and cloud platforms (AWS, Google Cloud, Azure). Enhance your collaboration and documentation skills by working in a dynamic, remote team environment.

Schedule: Thursday, Friday, Saturday, Sunday, Monday - 6:00am to 2:30pm Pay Range: $34-38/hr, depending on overall skills and experience OVERVIEW OF ROLE: The Electromechanical Technician will be responsible for carrying out assembly, maintenance, and troubleshooting of control systems infrastructure and equipment. They will be responsible for both low-voltage control wiring and higher-voltage power wiring and will work on a variety of internally developed and third-party systems and machines. They will work closely with Controls Engineers and Maintenance Mechanics on the Manufacturing team, as well as both technicians and engineers from a variety of adjacent working groups. for all in-plant automation devices such as Allen Bradley PLC's, HMI's and VFD's.. The Electromechanical Technician will assist in accurate data collection for MES, Kepware and SCADA systems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform maintenance (corrective, preventive, predictive, routine, and troubleshooting) on instrumentation systems and components in a safe, efficient, and compliant manner. Wire, test, and troubleshoot control panels and individual electrical subcomponents. Assemble control systems infrastructure and install third-party equipment such as power meters, pumps, pressure sensors and the like. Read and mark-up electrical schematics. Assist with maintaining all equipment programs database. Follow company and industry workmanship standards for assembly and electrical work. Follow Lock-Out Tag-Out (LOTO) procedures as-needed. Set up and troubleshoot simple ethernet communications networks. performing routine and emergency maintenance of the facility's industrial electrical and control systems and equipment. Recommend component replacement or upgrades when items become obsolete or are at end of life. Assist in maintaining building SCADA systems to ensure all are functioning as designed. Continuously improve the reliability of current systems Ability to effectively communicate with co-workers and take direction from others. Ability to work in a fast-paced environment, with multiple and changing priorities while maintaining strong attention to detail and a high level of accuracy. Other job duties as assigned EDUCATION AND/OR EXPERIENCE: 2 - 4 years of relevant experience Familiarity with the basic concepts of PLCs, HMIs, SCADA systems, and networking Familiarity with cGMP/GMP. Strong understanding of automated manufacturing equipment and programming required. Knowledge of proper wiring and cabling standards and techniques (Clean termination, ferruling, grounding & bonding, strain relief, etc.) Proven experience with troubleshooting equipment problems and performing complex system tests required. Rockwell certification preferred. Proficient in MS Word, Excel, PowerPoint required. Experience with databases, process monitoring systems and MES (manufacturing execution system) / information systems. Valid Massachusetts Driver's License required. Know the proper use of hand and power tools. Experience in a food processing & manufacturing environment is a plus. PHYSICAL REQUIREMENTS AND ENVIRONMENT: Must have good vision and manual dexterity. Able to sit / stand for prolonged periods at a desk and working on a computer. Must be able to work in a cold environment and in tight areas. Able to bend, push, carry, twist, and lift up to 50lbs without difficulty on a continuous basis. This position requires participation in our mandatory respiratory protection program with respect to some essential tasks. Performance of confined space entry is also required with respect to some tasks which are essential to this job. Loud Noise Perform tasks in both cold and hot work environments. Company provided Personal Protection Equipment (PPE) must be worn while on the production floor Exciting Benefits Await You! Enjoy top-tier Medical, Dental, Vision coverage. Pamper your furry friends with Pet Insurance. Stay fit with our Wellness Plan and Free Gym Access. Boost your skills with Employee Tuition Reimbursement. Unlock endless opportunities with College Scholarship for dependents. Reap the Rewards of Our Bonus Program Available to Our Salary and Hourly Employees. Receive a Generous 401k Company Match. Take advantage of Competitive Paid Time Off. Elevate Your Safety Net with Company-Sponsored Life Insurance Coverage. Receive Relocation Assistance for a Smooth Transition. Earn Rewards through our Employee Bonus Referral Program. Elevate Your Workplace Experience with Community Impact Opportunities. Celebrate Together with Employee Appreciation BBQs, Happy Hours, Birthdays, & More! Opportunity Calls! Unsure if you meet all requirements? Don't hesitate, apply! Our recruitment process is prompt and transparent. Your resume will receive swift attention from our talent professionals. If chosen, you'll undergo a recruiter phone screen, followed by interviews with key team members. We value your potential. At Home Market Foods, we champion equal opportunities for all, prohibiting discrimination based on race, religion, gender, and more. Our commitment extends across all aspects of employment, ensuring a fair and inclusive workplace. At this time, Home Market Foods will not sponsor applicants for employment authorization for this position for the following work visas: STEM OPT EAD, H-1B, H-1B1, E-3, O-1, J-1, or TN

Are you looking to be a part of a growing pharmaceutical company? One of our largest clients is currently seeking Metrologist II to join their Billerica, Massachusetts team. Our client is one of the leading pharmaceutical companies specializing in developing and manufacturing solid dosage products. If you believe you are qualified, we would be excited to connect and discuss this opportunity in more detail. Direct Hire Pay Rate: DoE 1 st shift Job Summary Provides ongoing support for manufacturing and quality control instruments. Responsible for installing, maintaining, testing, repairing, and calibrating a diverse range of electrical and mechanical equipment while adhering to good manufacturing practices. Responsibilities • Calibrate instruments such as, RO systems, WFI stills, clean steam generators, Autoclaves, CIP systems, lab equipment and manufacturing equipment • Perform scheduled, new and emergency calibrations activities with vendors on a critical process equipment and lab instrumentation ensuring compliance with SOPs and cGMPs • Maintain calibration records and instrument tagging • Basic knowledge on cleanroom classifications, and HEPA and cleanroom certification • Write Standard Operating Procedures (SOPs) • Must be proficient in troubleshooting instrument control loops like temperatures, pressure, flow controllers etc. • Follow all environmental, health, and safety requirements and protocols • Proficient at reading and understanding schematics, logic ladder diagrams, and P&IDs • Assist in change control documentation and deviation notifications • Write initial deviations using the QMS system • Perform new instrument and equipment introduction using the qualified CMMS • Assist in troubleshooting instrumentation issues as needed • Assist in performing maintenance on lab instrumentation and manufacturing equipment • Coordinate inventory for spare parts used on critical instruments • Support operations during 1st shift, and be available after hours as needed to support the business • Other duties as assigned Qualifications • High school diploma or equivalent required, Associate degree in STEM preferred • Minimum 4+ years of related experience • Journeyman Certified Electronic Technician Level 1 and Certified Control Systems Technician Level 1 from an accredited agency preferred • Experience in temperature, pressure, flow (liquid & gas), pH, conductivity, humidity, lab instrumentation controllers, depyrogenation oven, freeze dryer, steam generators, steam boilers, air compressor, vacuum pumps, and lab instrumentation • Experience soldering, use of DMM, and oscilloscopes • Knowledge of pharmaceutical-manufacturing/lab instrumentation environment • Experience utilizing quality manage systems like Trackwise, EDMS, MasterControl, or equivalent • Strong knowledge of Blue Mountain calibration software or equivalent • Thorough understanding of metrology principles defined in ASNI/NCSL required • Familiarity with FDA, cGMP, SOPs, ASNI/NCSL, EU and ISO standards • Knowledge of pharmaceutical manufacturing process equipment and lab instrumentation Our client offers a competitive compensation package as well as an excellent benefits package for eligible candidates. Please visit us at https://www.prostaffworkforce.com/ to explore all opportunities. #IND1

Job Description At Cadence, we're passionate about advancing medical technology and making a real impact in patients' lives. As a full-service contract manufacturer, we take pride in delivering high-quality, life-changing products through precision manufacturing and collaborative innovation. We're looking for a Metrologist to join our team in Cranston, RI and help ensure the accuracy and reliability of the measurements that drive our manufacturing excellence. What You'll Do As a Metrologist, you'll be a key partner in maintaining and improving the integrity of our measurement systems. Your work will directly impact product quality and process efficiency, from calibration to continuous improvement. You will: Develop and implement measurement protocols and procedures that align with industry standards and regulatory requirements. Conduct statistical analyses, including Measurement System Analysis (MSA), to evaluate and optimize measurement processes. Perform regular calibration, maintenance, and troubleshooting of measurement tools and equipment. Collaborate with Engineering and Production teams to resolve measurement challenges and support new process development. Maintain accurate and up-to-date calibration records to support audits and compliance efforts. Train and support team members on metrology techniques and best practices. What You Bring Minimum Qualifications: Bachelor's degree in Metrology, Engineering, Physics, or a related field. 3+ years of hands-on experience in metrology, quality assurance, or measurement systems. Strong understanding of calibration processes, measurement standards, and quality protocols. Solid data analysis and problem-solving skills. Preferred Qualifications: Certification from a recognized metrology organization. Experience in a regulated manufacturing environment. Familiarity with Statistical Process Control (SPC) tools and methods. Experience in OGP, Hexagons (PC Dmis), and GD & T. What Sets You Apart You're detail-oriented, analytical, and a strong communicator. You take pride in ensuring that measurement systems are accurate, compliant, and continuously improving. Your ability to interpret data and collaborate with cross-functional teams makes you a vital part of our commitment to quality.

Our innovative startup seeks driven, high performance, high energy independent achievers who can work in a multidisciplinary team to build a groundbreaking electric VTOL platform that will be the foundation for a range of high performance ultra quiet Vertical Flight Systems. Job Description MagLev Aero is seeking an electromechanical technician to help build its electric propulsion thruster system prototypes. In this role, you will fabricate and test electromagnetic assemblies, wire harnesses, and mechanical test equipment. You will also perform mechanical and electronics rework, calibrate sensors, and take quality assurance measurements. You will work alongside our engineering team on-site and your craftsmanship will be a key contribution to the success of this project. Location : This is an on-site position at MagLev Aero's office located in Boston's Seaport District. Expected Responsibilities : Create and test wire harnesses in accordance with drawings or detailed descriptions. Assemble, rework, and test printed circuit boards from a schematic. Wind and pot coils and other electromagnetic assemblies from drawings. Refine existing processes for better throughput or superior performance. Assemble electro-mechanical test fixtures and test articles. Perform quality measurements on parts and systems. Qualifications Desired Skills : Prior experience building harnesses: stripping, crimping, and bundling. Prior experience winding coils desirable. Prior soldering experience. Experience with hot air tools is desirable. Comfortable using basic electrical test equipment (oscilloscopes, multimeters, isolation testers) in a prototyping environment. Able to understand electrical schematics and mechanical drawings. Experience with 3D drafting tools (e.g. Solidworks, Fusion, NX) is a plus, as is electrical drafting (e.g. OrCAD, Altium, VeSys, Solidworks Electrical) Comfortable around high voltage, electrical power systems, and chemical solvents. Prior high voltage experience is desirable but not required. Attention to detail. Able to make precise measurements using calipers and micrometers. Able to lift at least twenty-five pounds and stand for periods of 30 minutes. Proficient with hand and power tools. Familiar with basic machine shop tools (e.g. band saw, drill press). Experience with lathes/machining (CNC) is desirable but not required. Experience with 3D printing is desirable. Able to work independently from a set of tasks. Interested in process improvement. A few years of hands-on experience in a related area (aerospace, automotive, job shop, university lab) is desirable. Additional Information All your information will be kept confidential according to EEO guidelines.

Our innovative startup seeks driven, high performance, high energy independent achievers who can work in a multidisciplinary team to build a groundbreaking electric VTOL platform that will be the foundation for a range of high performance ultra quiet Vertical Flight Systems. Job Description MagLev Aero is seeking an electromechanical technician to help build its electric propulsion thruster system prototypes. In this role, you will fabricate and test electromagnetic assemblies, wire harnesses, and mechanical test equipment. You will also perform mechanical and electronics rework, calibrate sensors, and take quality assurance measurements. You will work alongside our engineering team on-site and your craftsmanship will be a key contribution to the success of this project. Location: This is an on-site position at MagLev Aero's office located in Boston's Seaport District. Expected Responsibilities: Create and test wire harnesses in accordance with drawings or detailed descriptions. Assemble, rework, and test printed circuit boards from a schematic. Wind and pot coils and other electromagnetic assemblies from drawings. Refine existing processes for better throughput or superior performance. Assemble electro-mechanical test fixtures and test articles. Perform quality measurements on parts and systems. Qualifications Desired Skills: Prior experience building harnesses: stripping, crimping, and bundling. Prior experience winding coils desirable. Prior soldering experience. Experience with hot air tools is desirable. Comfortable using basic electrical test equipment (oscilloscopes, multimeters, isolation testers) in a prototyping environment. Able to understand electrical schematics and mechanical drawings. Experience with 3D drafting tools (e.g. Solidworks, Fusion, NX) is a plus, as is electrical drafting (e.g. OrCAD, Altium, VeSys, Solidworks Electrical) Comfortable around high voltage, electrical power systems, and chemical solvents. Prior high voltage experience is desirable but not required. Attention to detail. Able to make precise measurements using calipers and micrometers. Able to lift at least twenty-five pounds and stand for periods of 30 minutes. Proficient with hand and power tools. Familiar with basic machine shop tools (e.g. band saw, drill press). Experience with lathes/machining (CNC) is desirable but not required. Experience with 3D printing is desirable. Able to work independently from a set of tasks. Interested in process improvement. A few years of hands-on experience in a related area (aerospace, automotive, job shop, university lab) is desirable. Additional Information All your information will be kept confidential according to EEO guidelines.

Who We Are: Clinical Engineering is a specialty within biomedical engineering, responsible for using medical technology to optimize healthcare delivery. Elliot Health System is the largest provider of comprehensive healthcare services in southern New Hampshire. We are truly dedicated to providing innovative, life-changing, and life-saving healthcare every day to every individual. About the Job: 40 hours per week, M-F, 7:00 AM - 3:30 PM Under the general direction of the Director, Clinical Engineering, and the direct supervision of the Clinical Engineering Supervisor, the Biomedical Technician I will perform a variety of preventive maintenance, functional and electrical safety tests, calibration and repairs to assure the safe and proper functioning of hospital biomedical electronic/electromechanical equipment. What You'll Do: Performs all testing procedures on designated hospital equipment: electric beds, electric and non-electric stretchers, and other medical equipment according to specified standards, policies, and procedures. Takes action as appropriate to maintain or restore equipment to satisfactory operating performance. Implements the preventive maintenance program utilizing general and specific types of test equipment and procedures. Notifies appropriate supervisor of any malfunctions or unusual condition of equipment to initiate repairs as needed; coordinates repair with outside firms or escalates to Clinical Engineering supervisor as indicated or directed. Maintains familiarity with safety features and devices of designated equipment and complies with established safety regulations and practices. Ensures work area is maintained in a clean, safe and organized manner. Utilizes appropriate protective safety equipment in performance of normal duties as indicated. Under the guidance of the Biomedical Technician II and Specialist's, assist in performing preventative maintenance, inspection, cleaning, and repairs to high-risk equipment as needed/requested. Who You Are: Education: High school degree or GED required; Associate degree in Electronics Technology or Biomedical Technology preferred. A combination of equivalent training and experience will be considered. Experience: 1-3 years of computer-based, mechanical, biomedical, and/or electronics experience required. Certification/Licensure: Valid driver's license required. Software/Hardware: Ability to use various test equipment frequently used in the Healthcare Technology Management profession. Knowledge in Microsoft Word and Excel. Why You'll Love Us: Health, dental, prescription, and vision coverage for full-time & part-time employees Short-term disability, long-term disability, and life insurance coverage Competitive pay Tuition Reimbursement 403(b) Retirement Savings Plan And more! Work Shift: 40 hours per week, M-F, 7:00 AM - 3:30 PM SolutionHealth is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, disability status, veteran status, or any other characteristic protected by law.

Job Description BMET II- Worcester, MA Salary: $32.00- $35.00/hr Other Forms of Compensation: Join Intelas, a Compass One Healthcare company. Intelas, a Compass One Healthcare company, delivers smarter asset management by blending expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make more informed capital decisions. Our programs support 100% regulatory compliance and drives 98% equipment uptime-so clinicians can focus on care, not equipment issues. We support nearly 4,500 healthcare sites nationwide-from large, campus-based acute care hospitals to system-integrated outpatient clinics. With more than 1.15 million medical devices managed, we provide the clarity and consistency needed in today's rapidly evolving healthcare environment. Join Intelas-where your career thrives, your potential is unleashed, and your work directly supports patient care. Whether you're just starting out or are a seasoned professional, our people-first approach ensures opportunities for continuous growth, development, and fulfillment. Explore more at intelashealth.com. Job Summary Key Responsibilities: Performs planned maintenance and electrical safety inspections on a broad range of patient care and selected support equipment in compliance with established standards. Manages all assigned equipment and schedules service. Performs pre-acceptance inspections and develop PM procedures on equipment; maintains files on procedures and manuals. Ensures test equipment is working properly and calibrated within established intervals. Responds expeditiously to calls from clinical departments to evaluate and rectify valid operator complaints and concerns. Researches and initiates orders for repair parts, working within established budget parameters. Maintains purchase order log and validate invoices for payment (field service personnel only). Provides informal training to equipment users and Crothall Services Group staff as requested or when circumstances dictate. Makes recommendations to the Department Manager regarding service strategies on equipment; keeps supervisor informed of activities, needs and problems. Participates in the Quality Improvement / Risk Management program by gaining an understanding of the issues and concerns of customers and making recommendations for improvement. Maintains an orderly and functional work environment. Provides emergency on-call responsibilities as needed. Documents all significant asset related actions in compliance with department practices. Participates in department meetings. Collaborates with fellow technical personnel in department meetings to ensure they are kept abreast of technical updates and/or device related problems. Preferred Qualifications: Associates degree in electronics/biomedical equipment technology, military training or equivalent experience 3 years servicing clinical/patient care equipment in a hospital environment For field service positions requiring travel, valid driver's license is required Ability to work independently with some supervision Good communication and strong customer service skills Good organization and time management skills Working knowledge of computer applications pertaining to tracking service histories and producing reports on assets Good trouble-shooting skills Ability and willingness to serve "on-call" duty as required Strong work ethic and ability to work as a member of a team Apply to Intelas today! Intelas is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Intelas are offered many fantastic benefits. • Medical • Dental • Vision • Life Insurance/ AD • Disability Insurance • Retirement Plan • Flexible Time Off • Holiday Time Off (varies by site/state) • Associate Shopping Program • Health and Wellness Programs • Discount Marketplace • Identity Theft Protection • Pet Insurance • Commuter Benefits • Employee Assistance Program • Flexible Spending Accounts (FSAs) • Paid Parental Leave • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Intelas maintains a drug-free workplace. Req ID: 1493404 Intelas ASHLEY VAVROCK [[req_classification]]