EnSiteUSA jobs in Houston, TX - 37 jobs

. NOTE: Accepting resumes only. Rodman - Responsible for transporting any necessary supplies to be used on the job from the truck to the field. The Rodman is to perform his duties as directed by the Survey Supervisor, Party Chief, or Instrument Man. No minimum field surveying experience required, but preferred and knowledgeable in operating the equipment required to perform the assigned task. For more information about EnSiteUSA, please visit: *****************

We're seeking resumes of inspectors with previous experience working with Compressor Stations for a variety of projects: Chief Inspectors Welding Inspectors CWI/CPWI Electrical & Instrumentation Inspectors Coating Inspectors - NACE I Utility Inspectors Materials Managers Office Managers Candidates should have 5+ years previous experience working with Compressor stations and other facilities. API 1169 strongly preferred. Project location depends on client and job site. Please note, this is not an all-inclusive list of tasks/duties. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information.

Note: Accepting resumes. The Chief Inspector reports directly to the Construction Manager. The Chief Inspector's duties and responsibilities require that they will be both knowledgeable and experienced in all phases of pipeline construction and inspection. Primary Functions: Supervises all phases of the field quality assurance/control and technical staff assigned to the project to ensure adherence to the Client Company's construction contract drawings and specifications. Acts as a Client Company Field Representative to ensure compliance with all provisions of various governmental regulatory permits, including personal contact with designated officials. Insures adherence to right-of-way easement provisions pertaining to the construction process. Coordinates construction contract activities with associated Client Company operating division. Anticipates and recognizes unusual project situations involving progress, quality or monetary responsibility and advises or makes recommendations for resolving them. See that all required documents are completed and transmitted in accordance with the Client Company's procedures. Ensures applicable measures are employed during construction to minimize adverse environmental or safety impacts and complies with all environmental or safety commitments. Qualifications: Minimum of ten (10) years experience in the pipeline and construction industry. Minimum of five years experience in all phases of pipeline construction quality assurance/control. Has supervisory quality assurance/control experience in the construction of pipelines and related facilities and is versed in Client Company maintenance and operating policies or procedures. Has proven judgment and decision-making skills. Is familiar with and has proven ability to understand and fulfill design requirements related to regulatory codes that govern construction of transmission pipelines and related facilities. Has understanding of preventative or counter measures available to minimize the environmental impacts of construction activities. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit: *****************

Note: Accepting resumes. The Electrical & Instrumentation Inspector reports directly to the Chief/Construction Engineer. The Electrical & Instrumentation Inspector's duties and responsibilities require that they will be both knowledgeable and experienced in all phases of pipeline construction and inspection. Primary Functions: Performs duties as designated by the Chief/Construction Engineer in accordance with job requirements outlined in the assigned activity, uphold NEC and ISA codes and the Client Company codes and Standards. Advise Construction Engineer of all decisions, problems, and possible alternatives in the assigned activities, and suggestions as to solutions to field problems. Assures that all construction activities are in accordance with Client specification codes and standards and that the latest specifications as stated in the National Electrical Code are strictly adhered to. Assure that all safety procedures are adhered to. Receive and thoroughly inspect all mechanical, electrical and instrumentation equipment and assure that it arrives in acceptable condition. Assure that all Calibration equipment was recently calibrated to national standards. Become thoroughly familiar with all electrical and instrumentation hook-ups and their functions. Record and maintain accurate records concerning damage to equipment and take steps to repair or replace, if necessary. Qualifications: Minimum of five (5) years experience as an Electrical Inspector of which two years are of general pipeline or plant experience with an emphasis in electrical power and control system construction methods. Essential to possess a working knowledge of the National Electrical Code and ISA standards. Has proven judgment and decision-making skills. Ability to read and interpret piping and instrumentation drawings pertaining to the construction project. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit: *****************

The Inspection Account Coordinator provides direct support to the Houston-based Inspection and Construction Management team. This on-site role is responsible for managing the day-to-day operational functions of the Inspection department, supporting senior management, field personnel, and assisting with client project requirements. The position is located at the Houston office. Duties and Responsibilities Provide administrative support to the VP of Inspection. Assist the VP with project resourcing, including communicating with clients regarding project needs, maintaining a resume database, identifying potential candidates, and collecting personnel information. Maintain posted job openings and request new job postings as needed. Develop and maintain strong working relationships with internal teams as well as external current and potential future field personnel. Process new hires and all staffing changes in the HRIS system. Communicate staffing changes accordingly with HR, Safety, IT, and Project Teams, and maintain all staffing plans and rosters. Facilitate project setup: review, rate, and communicate with Accounting and Project teams on project-specific needs. Ensure client Purchase Orders (POs) are received, reviewed, and executed accordingly. Maintain equipment, tool calibration, and equipment list for the Inspection Department. Provide training to field personnel on timekeeping and expense reporting. Review and approve field time and expenses for assigned accounts, including requesting and obtaining client approvals. Review and approve project invoices for assigned accounts. Prepare and distribute project and/or Inspection required reports, documents, or correspondence in a timely manner. Respond to inquiries in a timely manner and escalate inquiries when needed to appropriate team members. Perform other job-related duties as assigned. Be available to be on-call during evenings and weekends as needed. Other Skills and Abilities Demonstrated ability to take initiative and be a self-starter. Strong customer service skills, including responsiveness and problem-solving. Strong intrapersonal and communication skills. Demonstrated organizational skills, including attention to detail. Proven ability to set priorities, meet deadlines, and multi-task. Ability to maintain a professional demeanor. Ability to work both independently and as part of a team must be reliable. Proven ability to handle confidential information with discretion. Basic knowledge of phone, fax, and copier functions. Experience Requirements 3-5 years' experience in a similar role or a Bachelor's degree. Intermediate experience in MS Office Suite (particularly MS Word and MS Excel). Previous experience using SAP Programs (SAP Supplier Portal, SAP-Fieldglass). Heavy data entry experience. Experience in the pipeline service/construction industry is a plus. Experience in Human Resources is preferred.

Job DescriptionSalary: The HSSE & Compliance Coordinator provides administrative & technical support for EnSiteUSA. Primary responsibilities include overseeing confidential and time sensitive safety information/items and the maintenance of the corporate drug and alcohol program. ESSENTIAL FUNCTIONS OF THE JOB Provides administrative and technical support to the Safety team including VP & Manager Acts as Lead Administrator of the Drug & Alcohol program Assists with managing Operator Qualification programs. Assist with managing audit processes. Provides administrative support to the Safety Department with management of databases as they relate to EnSiteUSA, including, but not limited to; PTC, ISNetworld, Veriforce, NCMS, etc. Produces, distributes, and collects all Safety information and updates information in internal systems. Assists with ordering safety supplies/equipment, maintains inventory, makes recommendations as appropriate. Approve and code invoices & track cost for the Safety Department. Reviews and approves Safety Requests for employee hires/re-hires. Processes appropriate paperwork as it applies to rehires and project specific needs. Collaborates with HR and operations groups to ensure timely onboarding and offboarding of new hires and rehires. Work with CFO and Safety Manager on EnSiteUSAs Certificates of Insurance. OTHER DUTIES AND RESPONSIBILITIES OF THE JOB Maintains a safe atmosphere in the Houston office Provides administrative support to various operations groups within the organization. Assists with client specific safety requirements. Assists with Workers Compensation and Injury reports. Possible travel may be required. Performs all other duties assigned. OTHER SKILLS AND ABILITIES Must possess computer proficiency in Windows, MS Word, MS Excel, PowerPoint & SharePoint. Must possess excellent oral and written communication skills. Possesses ability to take initiative and be a self- starter. Demonstrated organizational skills, including strong attention to detail. Possesses ability to maintain confidential information. EXPERIENCE REQUIREMENTS Requires a minimum of two (2) years of administrative or safety experience. EDUCATION REQUIREMENTS Two (2) years post-secondary education in safety or administration preferred. PHYSICAL REQUIREMENTS ESSENTIAL TO PERFORM THE FUNCTIONS OF THE JOB May be required to lift up to 30 lbs. If object is over 30 lbs. you are required to have written permission from your supervisor prior to lifting or moving the object. Frequent use of auditory, verbal and visual capabilities in order to adequately communicate via phone, computer and in person. Frequent sitting for extended periods of time to carry out administrative functions. Frequent concentration for extended periods of time, paying attention to detail to analyze information. Frequent use of hands to operate the computer or office equipment. Occasional squatting or stair climbing. *This position is on-site and located in Houston, Texas. No relocation available at this time. Please note, we are not accepting inquiries or candidates from third party staffing agencies at this time. EnSiteUSA is an Equal Employment Opportunity (EEO) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, genetics, disability, age or veteran status.

Note: Accepting resumes. The Construction Manager reports directly to the Project Manager. The Construction Manager's duties and responsibilities require that they will be both knowledgeable and experienced in all phases of pipeline construction and inspection. Primary Functions: Participates with management and the Client in the planning and development of project assignments. Provide construction consultation, assistance and information to management and the Client. Maintains costs and scheduling control within assigned project cost. Assures adherence to all Client specifications and codes. Assures proper timing and execution of staff control in the areas of quality assurance/control, documentation, reporting, contracts and material delivery. Qualifications: Minimum of ten (10) years management experience in the pipeline and construction industry. Has actual field experience in all phases of quality assurance and control. Familiar with all aspects of DOT Regulations, API standards and other project requirements. Must be able to effectively utilize staff resources and staff expertise as changing and advancing technology and project needs dictate. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit: *****************

Job DescriptionSalary: Note: Accepting resumes. The Safety Inspector reports directly to the Project/ Construction Manager. The Safety Inspector's duties and responsibilities require they be knowledgeable and experienced in all phases of pipeline construction, operation, and inspection. The Safety Inspector's responsibilities include, but are not limited to, the following. Primary Functions: Enforces safety policies, plans and specifications, based on OSHA 1926 Standards and State and Federal standards, and common best practices for the industry. Maintains continual communications with Company and "key" personnel to ensure compliance with the safety requirements. Provides safety meetings for field and key personnel with pertinent information related to project safety and hazardous conditions. Makes recommendations for safety compliance between the Company and Contractor. Participates with management in developing safety meetings and material for "key" personnel. Assures adherence to safety requirements regarding recognized hazardous conditions. Provides recommendations for preventative measures to minimize accidents in construction activities. Follows EnSiteUSA Safety and Health procedures. Qualifications: Has a minimum of five (5) years safety experience in the pipeline or construction industry. Able to assume the role of both Consultant and Safety Inspector, as circumstances dictate, to Construction Management and Company regarding safety and hazardous conditions. Trained in Pipeline Safety Regulations, and OSHA Construction Safety with heavy emphasis in regards to Excavation Safety, and Hazardous Conditions Recognition. Has proven ability and a thorough understanding of Company Safety Policy, OSHA 1926, DOT regulations, Federal and State safety codes. Is versed in Company policy, procedures, training, and practices regarding safety and construction. Has actual field experience regarding safety, hazardous conditions, and related circumstances. Has the ability to recognize hazardous situations and recommend corrective measures. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspectorfor more information. For more information about EnSiteUSA, please visit: *****************

EnSiteUSA is accepting resumes for qualified, experienced candidates to fulfill a variety of land services positions including: Project Land Managers Right of Way Supervisors Right of Way Agents (all levels) Title Supervisors Title Specialists/Abstractors Data/Document Specialists Please submit resume with detailed work history that includes project names, dates, locations worked and references. Also include any licenses you have, a TREC is a plus.

Note: Accepting resumes. The primary responsibility of the Materials Coordinator shall be to plan, schedule and coordinate the material procurement program to meet the area construction schedule. The Materials Coordinator shall maintain control of all construction materials for construction projects. Primary Functions: Plan, schedule, review and coordinate material procurement to meet the area construction schedule. Maintain administrative control of all construction materials as required for the construction project. Initiates purchase requisitions for critical materials as necessary to meet construction needs and contract obligations. Supervises the procurement of materials not ordinarily procured by the Purchasing Department. Ensures that all material procured meets D.O.T., OSHA and Client Company requirements. Submits periodic project material status reports. Coordinates flow of materials to construction sites. Identifies and monitors problems in the material delivery program and recommends and implements corrective action. Maintains contact with stores, purchasing, design and construction personnel as well as outside vendors to discuss matters relating to the procurement of materials. Verifies accuracy of material ordered on authorization and purchase orders to the construction drawings. Corrects and procures materials missed or ordered incorrectly. Ensures that all completion reports are received by Plant Accounting within a reasonable time after completion of a project to verify that all materials are accounted for. Verifies that all materials used in the performance of the job assignment are in compliance with Client Company requirements. Qualifications: Minimum of two years prior experience working for the pipeline industry. Experience using field purchasing control systems and generating completion reports. Able to perform duties of the Senior Materials Inspector and ability to work without close supervision. Should be familiar with Department of Transportation (D.O.T.) rules and regulations. For more information about EnSiteUSA, please visit: *****************

The Senior Project Manager is responsible for meeting all contractual requirements of assigned projects in terms of technical performance, costs, and schedules, while developing and implementing business development plans to establish and sustain highly effective relationships with existing clients and new clients. This position will be based in either the Lexington, Kentucky office or the Houston, Texas office. ESSENTIAL FUNCTIONS OF THE JOB Responsible for the day-to-day oversight of design, project engineering, right-of-way surveys and acquisitions, plan and job preparation, procurement, construction management and inspection, and managing of project personnel. Develops relationships with clients to assure the client's satisfaction with total project performance. Develops relationships with existing and prospective clients to promote and procure additional projects based on the high-quality performance on current projects. Promote Company capabilities and value proposition. Develops and verifies project scope, evaluates impacts of scope changes to design, cost, and schedule, directs the project team, controls costs, monitors qualify of deliverables, identifies project risks and develops risk mitigation plans. Works with functional managers to create and lead project teams in execution of projects from conception to close-out. Checks and approves client invoices from Project Manager's respective projects. Provide technical guidance to multidiscipline engineers in the design of transmission and distribution natural gas pipeline systems, liquids pipelines, pump stations, compressor stations, measurement & regulating stations, and associated facilities. Perform engineering design or calculation activities as required by the client or project related demand. OTHER DUTIES AND RESPONSIBILITIES OF THE JOB Interacts with clients on a regular basis. Manages personnel in accordance to project scope and requirements. Performs all other duties as assigned. Travel as required for site visits, key meetings, and depending upon the project or client needs. Participates and supports proposal development as required, including but not limited to cost estimating, scheduling, and project resource management. OTHER SKILLS AND ABILITIES Possess familiarization with regulations in the natural gas and petroleum industry with expertise in such areas as: Launcher & Receiver designs, pipeline routing and constructability, surveying and right-of-way acquisition, permitting, pipeline design, compressor or pump station design, metering and regulation, instrumentation and cathodic protection. Strong communication, analytical, and organizational skills. Ability to interpret project plans and requirements to communicate needed human resources to management. Strong knowledge and skills in Microsoft Office Suite. QUALIFICATIONS Minimum of ten (10) years experience preferably in the oil & gas industry and a thorough understanding and demonstrated ability in project management. Experience managing FERC 7(c) pipeline and facility projects. In depth knowledge of federal and state pipeline safety regulations. Experience designing and managing projects in the oil & gas industry in accordance with DOT Part 192 Active professional engineering license in at least one state preferred Excellent written and verbal skills. EDUCATION REQUIREMENTS Bachelor's degree in electrical, civil, or mechanical engineering preferred or commensurate years of proven technical experience with a two or preferably four year degree from an ABET accredited college or university. Formal project management training (i.e. PMBOK principles) is preferred. *This position is on-site and located in either the Lexington, Kentucky office or the Houston, Texas office. Please note, we are not accepting inquiries or candidates from third party staffing agencies at this time. EnSiteUSA is an Equal Employment Opportunity (EEO) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, genetics, disability, age or veteran status.

This position is responsible for providing both general and specialized engineering services to support EnSiteUSA Project Management in the planning, analysis, estimating and design of primarily natural gas and liquids pipelines; compressor stations; measurement; regulation; and related facilities. ESSENTIAL FUNCTIONS Planning of feasibility studies; FEED development; modeling; conceptual design; permitting; comprehensive understanding of process piping system design; project scope development; capital cost estimating and project scheduling. Design of gas transmission, gathering and distribution piping and facilities; gas storage; liquids pipelines; compressor stations; emergency shutdown; pipeline interconnects; block valve settings; pipeline pigging; odorization systems; dehydration; measurement and regulator stations; instrumentation and controls; interpretation and application of regulatory codes and standards; materials and equipment requisitioning; technical specifications and engineering standards. Work with multiple disciplines (civil, structural, I&E, etc..) and provide direction to drafting to develop PFD's, P&ID's, site plans, and piping drawings in order to create a construction set of drawings Have a working knowledge of compressor station, M&R, and facility design in accordance with PHMSA DOT Part 192. OTHER DUTIES AND RESPONSIBILITIES OF THE JOB Application of fluid and dynamics, thermodynamics, compression cycle and hydraulic machine principles to design and selection of compressors, flow and pressure control equipment, pumps, pressure vessels, atmospheric tanks, coalescing filtration and adsorption equipment including integration of engineered packages into complete process plants. Performs a wide variety of complex engineering assignments in areas of design, development, analysis, evaluation, testing, preparation of construction bid documents, and project management. Interfaces with clients to identify and meet their expectations. May perform other duties as deemed necessary by supervisor. OTHER SKILLS AND ABILITIES Ability to listen to the voice of the client and translate into engineering design that meets or exceeds expectations. Ability to demonstrate excellent oral and written skills. Ability to take initiative and be a self-starter. Ability to demonstrate organizational skills, including attention to detail. Proven ability to organize, schedule, and complete work on-time and with high quality. Knowledge of DOT, FERC, OSHA, and EPA codes and standards. Demonstrate the ability to build and sustain positive working relationships across geographical boundaries. Strong work ethic. Ability to travel up to 15%. Knowledge and experience using engineering design software such as HYSYS, GasCalc, Pipeline Toolbox, Caepipe, Caesar II, or similar is a plus. EXPERIENCE REQUIREMENTS E.I.T or P.E. Designation preferred. Experience Guidelines (minimum is Grade 1 for this position): Grade 1: 0-3 years Pay range will depend upon relevant experience and education. EDUCATION REQUIREMENTS PHYSICAL REQUIREMENTS ESSENTIAL TO PERFORM THE FUNCTIONS OF THE JOB Bachelor of Science Bachelor's Degree in Mechanical Engineering, Petroleum Engineering, Natural Gas Engineering, or Chemical Engineering. PHYSICAL REQUIREMENTS ESSENTIAL TO PERFORM THE FUNCTIONS OF THE JOB May be required to lift up to 30 lbs. If object is over 30 lbs. you are required to have written permission from your supervisor prior to lifting or moving the object. Frequent use of auditory, verbal and visual capabilities in order to adequately communicate (policies, procedures and objectives) via phone, computer and in person. Frequent sitting for extended periods of time to carry out computing functions. Frequent concentration for extended periods of time, paying attention to detail to analyze information. Frequent use of hands to operate the computer or office equipment. Occasional squatting, stair climbing or crawling to be able to install computer hardware. *This position is on-site and located in Houston, Texas. No relocation available at this time. Please note, we are not accepting inquiries or candidates from third party staffing agencies at this time. EnSiteUSA is an Equal Employment Opportunity (EEO) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, genetics, disability, age or veteran status.

Note: Accepting resumes. The Mechanical Inspector will report directly to the Chief Inspector, Construction Manager or Client Representative. The Mechanical Inspector's duties and responsibilities require that they will be both knowledgeable and experienced in compressor piping hook-up and all piping in station or plant. Primary Functions: Perform duties as designated by the Construction Engineer in accordance with job requirements outlined in the assigned activity. Maintain Client Company quality control standards and records. Assure that contractor adheres to the Client specifications, federal and state and safety codes. Advise Construction Engineer of all decisions, problems and any alternatives in the assigned activity. Assure that all piping, valves, flanges, etc. are properly installed in the correct ladel contents for the pressure and M.A.O.P. Assure that contractor and Client keep a good working relationship. Qualifications: A minimum of 5 years' experience and working knowledge of all piping and facility design. Knowledge of federal, state and local specifications. Knowledge of compressor piping hook-up and all piping in station or plant. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit: *****************

Note: Accepting resumes. The Environmental Inspector is under the general supervision of the Chief Inspector/Assistant Chief/ Client representative. The Environmental Inspector shall possess knowledge and be well skilled and competent in the regulations associated with field construction. The responsibilities include but are not limited to the following: Primary Functions: Has a full working knowledge of the Erosion and Sediment Control Plan, this includes the plan narrative and plan drawings. Ensures that all erosion and sedimentation control measures at waterways, roads, excavations, hillsides, etc., are installed in their proper sequence and in accordance to the design specifications. Keeps the Chief Inspector aware of any problems or of any anticipated problems which may affect compliance with the Environmental Plan or Governmental Regulations. Maintains close contact with all other inspectors on the project to address any questions or concerns that may arise. Assures that no design changes or material substitutions affecting the Environmental Plan are made unless prior approval is obtained from the Chief Inspector. Assures that all environmental structures damaged by the contractor are repaired and restored per the Environmental Plan. Assures that all materials used in the performance of the job assignment are in compliance with the Environmental Plan. Qualifications: Proven capabilities and experience in the execution of installing environmental controls. Is knowledgeable in Industry Standards relating to erosion and sediment control practices. Is thoroughly versed with the Client Company procedures of the Environmental Plan. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit: *****************

EnSiteUSA is accepting resumes for Survey Supervisor - Field positions. NOTE: Accepting resumes only Survey Supervisor - Involved in directing the pipeline survey efforts including organize and direct the actions of the individual survey crews and daily interface with Engineering, ROW and Environmental for civil and boundary survey needs. Qualifications shall consist of but not limited to previous pipeline survey experience, familiar with pipeline construction practices, and proficient with the use of GPS electronic survey data collection units and conventional survey equipment. For more information about EnSiteUSA, please visit: *****************

Note: Accepting resumes. The Welding Inspectors are under the general supervision of the Senior Welding Inspector (CWI). It is the responsibility of the Welding Inspector to be knowledgeable of the specifications covering the project under construction. This includes any references to codes, standards, etc. Primary Functions: Performs duties designated by the Senior Welding Inspector in accordance with the job requirements outlined in the assigned activity and the Client Company specifications and codes. Advises Senior Welding Inspector of all decisions, problems, and possible alternatives in the assigned activity. Adheres to and enforces EnSiteUSA and Client Company safety policies. Becomes thoroughly familiar with the Client Company's contract specifications and enforces them. Notifies the Senior Welding Inspector on environmental problems. Keeps daily log of incidents relating to the construction in the assigned activity. Prepares the appropriate report(s) for the assigned activity and forwards to the Senior Welding Inspector for review. Enforces Client Company welding procedures, qualifications, and specifications. Inspects welding technique and equipment. Inspects all welds visually. Reviews radiographic film report daily when required. Ensures that all rejected welds are repaired and replaced in accordance with Client's specifications. Qualifications: Has at minimum, a five-year working knowledge of all pipeline welding codes and specifications and is versed in Client Company contract specifications. Has previous quality assurance/control experience on construction projects including transmission pipelines, stations, and plants. Has proven human relations and administrative skills. The Senior Welding Inspector (CWI) reports directly to the Chief Inspector. It is the responsibility of the Senior Welding Inspector (CWI) to be knowledgeable about the specifications covering the project under construction. This includes any references to codes, standards, etc., in other publications, e.g., API, ASTM, etc. Primary Functions: Advises Chief Inspector of all decisions, problems, and possible alternatives. Adheres to and enforces EnSiteUSA and Client Company safety policies. Notifies the Chief Inspector of environmental problems which may arise. Keeps daily log of incidents relating to the construction in the assigned activity. Gathers and reviews the appropriate reports for the Inspector's assigned activities and forwards to the Chief Inspector for review. Enforces Client Company's welding procedures, qualifications, and specifications. Ensures that all Client Company's welding procedures and specifications are followed. Reviews daily with the Senior NDT all radiographic film results and reviews weld track system. Assures that all welding inspectors are qualified. Ensures that all rejected welds are repaired or replaced in accordance with Client's specifications. Qualifications: Minimum of fifteen (15) years experience in the pipeline and construction industry. Has working knowledge of all pipeline welding codes and specifications and is versed in Client Company contract specifications. Minimum ten (10) years proven previous supervisory quality assurance/control experience on construction projects including transmission pipelines, station, and plants. Has proven human relations and administrative skills. Has proven background and knowledge as a qualified radiographic film interpreter and has proven capabilities of supervising all NDE examinations, personnel, documentation and the final results. Trainable as, has held and/or is certified as a CWI (American Welding Society) or a CPWI (National Welding Inspection School). Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit: *****************

This position is responsible for providing both general and specialized engineering services to support EnSiteUSA Project Management in the planning, analysis, estimating and design of primarily natural gas and liquids pipelines; compressor stations; measurement; regulation; and related facilities. This position will be located in Houston, Tx. ESSENTIAL FUNCTIONS Planning of feasibility studies; FEED development; modeling; conceptual design; permitting; comprehensive understanding of process piping system design; project scope development; capital cost estimating and project scheduling. Design and installation of onshore natural gas or liquids pipeline systems including: measurement & regulation equipment, pigging facilities, mainline valves, and compressor stations Familiar with pipeline survey and pipeline construction techniques. Work with a drafting and mapping team to produce alignment drawings and provide coordination with ROW, environmental and archaeological personnel Design of gas transmission, gathering and distribution piping and facilities; gas storage; liquids pipelines; compressor stations; emergency shutdown; pipeline interconnects; block valve settings; pipeline pigging; odorization systems; dehydration; measurement and regulator stations; instrumentation and controls; interpretation and application of regulatory codes and standards; materials and equipment requisitioning; technical specifications and engineering standards. Work with multiple disciplines (civil, structural, I&E, etc..) and provide direction to drafting to develop PFD's, P&ID's, site plans, and piping drawings in order to create a construction set of drawings. Complete pipe sizing, and wall thickness calculations per client specifications. Working knowledge of HCA's and class location studies per DOT. Determine maximum field bending angles per client specifications and develop induction bend list for angles exceeding the maximum field bend angle. Proficient with PHMSA DOT codes and API and ASME standards relating to pipeline design, materials and installation Have a working knowledge of compressor station, M&R, and facility design in accordance with PHMSA DOT Part 192. OTHER DUTIES AND RESPONSIBILITIES OF THE JOB Application of fluid and dynamics, thermodynamics, compression cycle and hydraulic machine principles to design and selection of compressors, flow and pressure control equipment, pumps, pressure vessels, atmospheric tanks, coalescing filtration and adsorption equipment including integration of engineered packages into complete process plants. Performs a wide variety of complex engineering assignments in areas of design, development, analysis, evaluation, testing, preparation of construction bid documents, and project management. Interfaces with clients to identify and meet their expectations. May perform other duties as deemed necessary by supervisor. OTHER SKILLS AND ABILITIES Ability to listen to the voice of the client and translate into engineering design that meets or exceeds expectations. Ability to demonstrate excellent oral and written skills. Ability to take initiative and be a self-starter. Ability to demonstrate organizational skills, including attention to detail. Proven ability to organize, schedule, and complete work on-time and with high quality. Knowledge of DOT, FERC, OSHA, and EPA codes and standards. Demonstrate the ability to build and sustain positive working relationships across geographical boundaries. Strong work ethic. Ability to travel up to 15%. Knowledge and experience using engineering design software such as HYSYS, GasCalc, Pipeline Toolbox, Caepipe, Caesar II, or similar is a plus. EXPERIENCE REQUIREMENTS E.I.T or P.E. designation preferred. Pay range will depend upon relevant experience and education. EDUCATION REQUIREMENTS Bachelor of Science Bachelor's Degree in Mechanical Engineering, Civil Engineering, Petroleum Engineering, Natural Gas Engineering, Industrial or Chemical Engineering. WE ARE NOT ACCEPTING INQUIRIES OR CANDIDATES FROM STAFFING AGENCIES AT THIS TIME.

Note: Accepting resumes. The Safety Inspector reports directly to the Project/ Construction Manager. The Safety Inspector's duties and responsibilities require they be knowledgeable and experienced in all phases of pipeline construction, operation, and inspection. The Safety Inspector's responsibilities include, but are not limited to, the following. Primary Functions: Enforces safety policies, plans and specifications, based on OSHA 1926 Standards and State and Federal standards, and common best practices for the industry. Maintains continual communications with Company and "key" personnel to ensure compliance with the safety requirements. Provides safety meetings for field and key personnel with pertinent information related to project safety and hazardous conditions. Makes recommendations for safety compliance between the Company and Contractor. Participates with management in developing safety meetings and material for "key" personnel. Assures adherence to safety requirements regarding recognized hazardous conditions. Provides recommendations for preventative measures to minimize accidents in construction activities. Follows EnSiteUSA Safety and Health procedures. Qualifications: Has a minimum of five (5) years safety experience in the pipeline or construction industry. Able to assume the role of both Consultant and Safety Inspector, as circumstances dictate, to Construction Management and Company regarding safety and hazardous conditions. Trained in Pipeline Safety Regulations, and OSHA Construction Safety with heavy emphasis in regards to Excavation Safety, and Hazardous Conditions Recognition. Has proven ability and a thorough understanding of Company Safety Policy, OSHA 1926, DOT regulations, Federal and State safety codes. Is versed in Company policy, procedures, training, and practices regarding safety and construction. Has actual field experience regarding safety, hazardous conditions, and related circumstances. Has the ability to recognize hazardous situations and recommend corrective measures. Please note: API 1169 Certification is strongly preferred and often required for all Inspectors depending upon the project or client assignment. We strongly encourage all inspection applicants to consider API 1169 certification. Please visit API | API 1169 - Pipeline Construction Inspector for more information. For more information about EnSiteUSA, please visit: *****************

Job DescriptionSalary: This position is responsible for providing both general and specialized engineering services to support EnSiteUSA Project Management in the planning, analysis, estimating and design of primarily natural gas and liquids pipelines; compressor stations; measurement; regulation; and related facilities. This position will be located in Houston, TX ESSENTIAL FUNCTIONS Planning of feasibility studies; FEED development; modeling; conceptual design; permitting; comprehensive understanding of process piping system design; project scope development; capital cost estimating and project scheduling. Design and installation of onshore natural gas or liquids pipeline systems including: measurement & regulation equipment, pigging facilities, mainline valves, and compressor stations Familiar with pipeline survey and pipeline construction techniques. Work with a drafting and mapping team to produce alignment drawings and provide coordination with ROW, environmental and archaeological personnel Design of gas transmission, gathering and distribution piping and facilities; gas storage; liquids pipelines; compressor stations; emergency shutdown; pipeline interconnects; block valve settings; pipeline pigging; odorization systems; dehydration; measurement and regulator stations; instrumentation and controls; interpretation and application of regulatory codes and standards; materials and equipment requisitioning; technical specifications and engineering standards. Work with multiple disciplines (civil, structural, I&E, etc..) and provide direction to drafting to develop PFDs, P&IDs, site plans, piping drawings, in order to create a construction set of drawings. Complete pipe sizing, and wall thickness calculations per client specifications. Working knowledge of HCAs and class location studies per DOT. Determine maximum field bending angles per client specifications and develop induction bend list for angles exceeding the maximum field bend angle. Proficient with PHMSA DOT codes and API and ASME standards relating to pipeline design, materials and installation Have a working knowledge of compressor station, M&R, and facility design in accordance with PHMSA DOT Part 192. OTHER DUTIES AND RESPONSIBILITIES OF THE JOB Application of fluid and dynamics, thermodynamics, compression cycle and hydraulic machine principles to design and selection of compressors, flow and pressure control equipment, pumps, pressure vessels, atmospheric tanks, coalescing filtration and adsorption equipment including integration of engineered packages into complete process plants. Performs a wide variety of complex engineering assignments in areas of design, development, analysis, evaluation, testing, preparation of construction bid documents, and project management. Interfaces with clients to identify and meet their expectations. May perform other duties as deemed necessary by supervisor. OTHER SKILLS AND ABILITIES Ability to listen to the voice of the client and translate into engineering design that meets or exceeds expectations. Ability to demonstrate excellent oral and written skills. Ability to take initiative and be a self-starter. Ability to demonstrate organizational skills, including attention to detail. Proven ability to organize, schedule, and complete work on-time and with high quality. Knowledge of DOT, FERC, OSHA, and EPA codes and standards. Demonstrate the ability to build and sustain positive working relationships across geographical boundaries. Strong work ethic. Ability to travel up to 15%. Knowledge and experience using engineering design software such as HYSYS, GasCalc, Pipeline Toolbox, Caesar II, or similar is a plus. EXPERIENCE REQUIREMENTS E.I.T or P.E. Designation preferred. Pay range will depend upon relevant experience and education. EDUCATION REQUIREMENTS Bachelor of Science Bachelors Degree from an ABET accredited university in Mechanical Engineering, Petroleum Engineering, Chemical Engineering, Civil Engineering, or Electrical Engineering. *This position is on-site and located in Houston, Texas. No relocation available at this time. Please note, we are not accepting inquiries or candidates from third party staffing agencies at this time. EnSiteUSA is an Equal Employment Opportunity (EEO) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, genetics, disability, age or veteran status.