Operator jobs at Enterprise Products Partners - 47 jobs

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: Non-supervisory rig-based drilling positions include positions such as Floorman (entry-level), Roustabout (Offshore entry-level), Motorman and Derrickman. When completing your application, you will be asked to specify the position(s) for which you would like to apply. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you will do: Non-supervisory rig-based drilling positions are responsible for performing various manual labor tasks throughout the rig site, including rig up and down activities, general equipment operation, repairs and maintenance on rig components, assigned activities on the rig floor, mud-mixing, handling tubulars in the derrick, and other various duties as assigned. Demonstrate the H&P Company values: Actively C.A.R.E., Service Attitude, Innovative Spirit, and Teamwork. What you need: The worker must be at least 18 years of age The worker must pass a post-offer physical examination The worker must have proper legal authorization to work in the country where the rig is operating Work assignments are generally 12 hours per day, for 14-28 consecutive days, followed by 14-28 days off Ability to apply common sense to carry out written or oral instructions and to deal with problems involving a few concrete variables in standardized situations Basic ability to understand, speak, read, and write English Basic computer skills required Non-entry-level positions require a minimum of six months of prior drilling experience, as well as knowledge of procedures associated with drilling a well Prior mechanical equipment experience is preferred for motorman positions Application Deadline: Applications are accepted on an ongoing basis. ***The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. Comprehensive medical, dental, vision, and life insurance Flexible Spending or Health Savings Accounts 401k match Paid Leave Plans Parental & Adoption Benefits Disability Coverage Employee Assistance Program Educational Assistance Learning & Development Opportunities Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: Non-supervisory rig-based drilling positions include positions such as Floorman (entry-level), Roustabout (Offshore entry-level), Motorman and Derrickman. When completing your application, you will be asked to specify the position(s) for which you would like to apply. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you will do: * Non-supervisory rig-based drilling positions are responsible for performing various manual labor tasks throughout the rig site, including rig up and down activities, general equipment operation, repairs and maintenance on rig components, assigned activities on the rig floor, mud-mixing, handling tubulars in the derrick, and other various duties as assigned. * Demonstrate the H&P Company values: Actively C.A.R.E., Service Attitude, Innovative Spirit, and Teamwork. What you need: * The worker must be at least 18 years of age * The worker must pass a post-offer physical examination * The worker must have proper legal authorization to work in the country where the rig is operating * Work assignments are generally 12 hours per day, for 14-28 consecutive days, followed by 14-28 days off * Ability to apply common sense to carry out written or oral instructions and to deal with problems involving a few concrete variables in standardized situations * Basic ability to understand, speak, read, and write English * Basic computer skills required * Non-entry-level positions require a minimum of six months of prior drilling experience, as well as knowledge of procedures associated with drilling a well * Prior mechanical equipment experience is preferred for motorman positions Application Deadline: Applications are accepted on an ongoing basis. * The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. * Comprehensive medical, dental, vision, and life insurance * Flexible Spending or Health Savings Accounts * 401k match * Paid Leave Plans * Parental & Adoption Benefits * Disability Coverage * Employee Assistance Program * Educational Assistance * Learning & Development Opportunities * Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related liquid processing equipment. This position ensures the cost effective and efficient operation of liquid processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: * To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: hydrocarbon fractionation units, process controls and measurement, engines and compressors, pumps, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, gas fired heaters, process pumps, amine treating systems, and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results * Ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with Partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Actively participate and comply with Partnership's safety programs, policies, and initiatives * Communicate with control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * Occasionally use a full face respirator * Know and follow all company procedures, including our critical safe work procedures involving defensive driving, safe work permits, energy isolation (LOTO), electrical safety, excavation safety and confined space entry Required Education: High School Diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0-2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2-4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner * Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation * HIMI software operations experience * Working Conditions and Requirements: * The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance. * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required * Must live within 45 min of the work location DISCLAIMER: The above statements, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: Non-supervisory rig-based drilling positions include positions such as Floorman (entry-level), Roustabout (Offshore entry-level), Motorman and Derrickman. When completing your application, you will be asked to specify the position(s) for which you would like to apply. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you will do: * Non-supervisory rig-based drilling positions are responsible for performing various manual labor tasks throughout the rig site, including rig up and down activities, general equipment operation, repairs and maintenance on rig components, assigned activities on the rig floor, mud-mixing, handling tubulars in the derrick, and other various duties as assigned. * Demonstrate the H&P Company values: Actively C.A.R.E., Service Attitude, Innovative Spirit, and Teamwork. What you need: * The worker must be at least 18 years of age * The worker must pass a post-offer physical examination * The worker must have proper legal authorization to work in the country where the rig is operating * Work assignments are generally 12 hours per day, for 14-28 consecutive days, followed by 14-28 days off * Ability to apply common sense to carry out written or oral instructions and to deal with problems involving a few concrete variables in standardized situations * Basic ability to understand, speak, read, and write English * Basic computer skills required * Non-entry-level positions require a minimum of six months of prior drilling experience, as well as knowledge of procedures associated with drilling a well * Prior mechanical equipment experience is preferred for motorman positions Application Deadline: Applications are accepted on an ongoing basis. * The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. * Comprehensive medical, dental, vision, and life insurance * Flexible Spending or Health Savings Accounts * 401k match * Paid Leave Plans * Parental & Adoption Benefits * Disability Coverage * Employee Assistance Program * Educational Assistance * Learning & Development Opportunities * Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required. * Must live within 40 miles of reporting location.

Welcome to ConocoPhillips, where innovation and excellence create a platform for opportunity and growth. Come realize your full potential here. Who We Are We are one of the world's largest independent exploration and production companies, based on proved reserves and production of liquids and natural gas. With operations and activities in 13 countries, we explore for, develop, and produce crude oil and natural gas globally. We are challenged with an important job to safely find and deliver energy to the world. Our employees are critical to our success, and with them we power civilization. We're grounded by our SPIRIT Values - safety, people, integrity, responsibility, innovation, and teamwork. These values position us to deliver strong performance in a dynamic business - but not at all costs. We believe it's not just what we do - it's how we do it - that sets us apart. Fostering an Inclusive Work Environment To deliver superior performance, we create an environment that respects the contributions and differences of every individual. Wherever possible, we use these differences to drive competitive business advantage, personal growth and, ultimately, create business success. Job Summary Polar Tankers Overview Polar Tankers, a wholly owned subsidiary of ConocoPhillips, provides marine transportation for North Slope production, using five company-owned, double-hulled tankers in addition to chartering third-party vessels as necessary. The tankers deliver oil from Valdez, Alaska, to refineries primarily on the West Coast of the United States. The company operates five Endeavour-class tankers: Polar Endeavour, Polar Resolution, Polar Discovery, Polar Adventure and Polar Enterprise. Description If you are selected as the Utility Person, you will be assigned to work in the Deck, Engine and Steward Department, as needed. Utility Person is responsible for various duties as assigned by the Chief Mate, First Engineer, or Steward, and is required to participate in all drills and emergencies, and assists with the enforcement of rules, regulations, and pollution prevention. Position Overview This is a Safety Sensitive position. Relocation is not available for this position. Your responsibilities may include: When assigned to the engine department, under direction of the First Assistant Engineer, responsibilities may include: Cleans decks and ladder ways Replenishes materials and rag bins, empties trash, organizes tools and stores, paints, and assists with maintenance Familiar with engine room spaces to avoid hazards and take the necessary action in time of emergency Learns the plant and machinery operation Participates in maintenance and upkeep When assigned to the deck department, under the direction of the Chief Mate, responsibilities may include: Performs sanitation duties in the house, passage spaces, common areas, and heads Assists with mooring lines when docking and undocking, and with securing the deck for sea Assists with cargo operations Assists the deck department in the maintenance and upkeep of the areas and equipment assigned to the deck department Performs the duties of lookout when arriving or departing a port, or whenever required by the Master Working hours vary depending on departmental needs, but typically 12-hour days which includes 4-hours of overtime Qualifications - External Basic/Required: Must be legally authorized to work in the United States on a full-time basis for anyone other than current employer Currently hold, or have the ability (with or without reasonable accommodation) to obtain, a U.S. Passport Transportation Workers Identification Card (TWIC) Merchant Mariner Credential (MMC) Willing and able (with or without reasonable accommodation) to perform the following: Be away from home for periods in excess of two months Push/pull up to 200 pounds Lift/carry up to 100 pounds floor to shoulder Lift from floor to overhead and transport articles weighing up to 50 pounds Climb various ladders and stairs ranging from 5 to 200 feet in height Perform maintenance on equipment Stand for long periods of time Physically attend to vessels including confined space entry and environmental extremes Walk, stand, stoop, sit, climb, and carry material on a daily basis on even and uneven terrain Work outside in harsh weather conditions Work alone a high percentage of the time Preferred: 1+ years of experience working on a crude oil tanker 1+ years of experience working on a product tanker 1+ years of experience in operating a mechanical winch 1+ years of experience in operating a crane Currently hold the following endorsements on Merchant Mariner Credential (MMC): Able Seafarer-Engine Rating Forming Part of an Engineering Watch (RFPEW) Qualified Member of the Engine Department QMED Able Seafarer - Deck Basic Oil Tanker Cargo Operations endorsement (not barges) Basic Training endorsement Vessel Personnel with Designated Security Duties endorsement (VPDSD) Security Awareness endorsement Ordinary Seaman endorsement Wiper endorsement Steward's Department Food Handler (FH) endorsement Tankerman Assistant endorsements (not barges) RFPNW training course completion or endorsement Willing and able (with or without reasonable accommodation) to work overtime Excellent written and verbal communication skills Organized, efficient, and have problem solving skills Ability to clearly follow instructions, both written and verbal Ability to apply common sense to achieve the desired outcomes according to the company's operating procedures and safety protocols Organized, efficient and a methodical problem solver Takes ownership of actions and follows through on commitments by holding others accountable and standing up for what's right Delivers positive results through realistic planning to accomplish goals Builds effective solutions based on available information and makes timely decisions that are safe and ethical All unlicensed employees earn paid leave on the basis of twenty-five (25) days paid leave for every thirty (30) days of sea service. Tour lengths range from 65-85 days with an average tour of seventy-five (75) days onboard and sixty (60) days of paid leave. This position requires you to have a TWIC card (Transportation Workers Identification Card) to gain access to secure areas of Maritime Transportation Security Act (MTSA) regulated facilities and vessels. Any candidate selected for this position will not be allowed to begin work without proof of application for this card. Visit the TSA website: TWIC | Transportation Security Administration (tsa.gov) for more information. Successful applicants are all ConocoPhillips employees represented by the in-house associations, the Atlantic Maritime Employees Union (AMEU) for Unlicensed. Apply Before: Sponsorship: ConocoPhillips' sponsorship for employment authorization in the U.S. is NOT available for this position. EEO: In the US, ConocoPhillips is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, gender identity or expression, genetic information, or any other legally protected status.

KINDER MORGANKinder Morgan is one of the largest energy infrastructure companies in North America. We are a market leader in each of our businesses - Natural Gas Pipelines, Products Pipelines, CO2, and Terminals. We have an unparalleled, large footprint of diversified and strategically located assets that are core to North American energy infrastructure and help deliver needed energy products to high-demand markets.Kinder Morgan offers a robust benefits package that begins on your first day, including medical, dental, vision, life insurance, two retirement plans, paid holidays, and paid time off. BUSINESS UNIT: TERMINALS Kinder Morgan is the largest independent terminal operator in North America, providing a strong, reliable network of 144 terminals serving our customers' storage, distribution, blending and logistical needs. Our terminals store and handle renewable fuels, petroleum products, chemicals, vegetable oils and other products. We have a combined liquids storage capacity of approximately 151 million barrels and handle about 59 million tons of dry bulk materials annually.ESSENTIAL DUTIES AND RESPONSIBILITIES: Operates a 29-ton P&H Static Step less overhead bucket crane (cab controlled) in a safe and efficient manner to lift, move, and position loads of petroleum coke maintaining proper pit & pad storage and load coke from pit to grizzly hopper by following all associated procedures with a 18yrd clamshell bucket.Participate as trained and instructed in the maintenance, troubleshooting and repair of cranes, bucket and related equipment.May be assigned to general duties in all areas of operations of the terminals Maintain good and open communication with Driller Operator, Supervision and Maintenance Personnel via radio and other proper means Operate, monitor and maintain coke cutting equipment within the coke petroleum coke handling facility FoCoke cutting experience or drilling operations Follow proper safety rules and operating procedures to support zero tolerance safety objectives Perform proper decoking techniques by following all associated procedures while paying close attention to hot spots and allowing for extra quenching where needed Working with the Operator to un-head and re-head the coke drums, as well as performing the final sweep of the coke drum Must be capable of operating under fresh air with a SCBA or facemask breathing apparatus.Properly inspect equipment prior to and post operating and report any additional maintenance needs and conduct frequent audits on the associated drum cutting equipment Performs basic trouble shooting of petroleum coke cutting equipment As required, assist other petroleum coke cutting personnel with cleaning operations Performs housekeeping duties of petroleum coke cutting area Maintains and lubricates "cutting deck" petroleum coke cutting equipment Operates heavy equipment to gouge out, level, and distribute petroleum coke from inbound conveyors, storage and to outbound conveyors in a safe and efficient manner by performing the following duties.Operates D-9 and D10 Dozer with concave blade attached across front to gouge out, level, and distribute petroleum coke from conveyor to storage - storage to re-claimer in a safe, efficient manner.Operate dozer in successive passes over terrain to raise or lower terrain to specified level. Employ dozer day and night to push material to dozer trap in order to load out material for vessels.Maintain dozer, skid steer, forklift, track hoe, back hoe, and wheel loader equipment by performing preventive maintenance, i.e.: lubricating, cleaning, adding gear lubricants, changing filters and documenting all activity performed on said piece of equipment Experience operating an excavator, fork lift, telehandler, skid steer and man lift. Must be capable of becoming a certified operator on each piece of equipment.Train on remote controlled ship loader by engaging push buttons on the remote to distribute coke accordingly to stowage plan and ships chief mate instructions. Ensure satisfactory loading of the vessel and watch for safety of the ship loader during operation.Assures that work performed is done properly and safely Operators will train and operate all of the terminals equipment and perform the duties and responsibilities of the terminal's Equipment Operator/Maintenance positions such as Dozer, Driller and cutting, Overhead Crane, skid steers, Excavator, Telehandler, Man Lift, Front End Loader and Ship Loading Operations for progression. Minimum Requirements include: EDUCATION, EXPERIENCE REQUIREMENTS: High School Diploma or GED Equivalent is required Prior experience as a heavy equipment operator is preferred, but we will train all qualified applicants.COMPETENCIES, SKILLS AND ABILITIES: Operates equipment in a safe and efficient manner Utilize proper Personal Protective Equipment for the assigned tasks and report damaged protective equipment and unsafe conditions to Terminal SupervisorAble to work at different work locations when needed Perform housekeeping and general maintenance as required Ability to apply common sense understanding to carry out instructions.Must be able to effectively communicate verbally.Must work shift schedule as assigned and overtime with little to no notice during the week, weekends, holiday, etc. as needed for operational needs.In order to appropriately perform the essential duties of this job, regular work attendance is required.If required must be able to perform shift work, rotating day/night.You will be subject to the on-call schedule and must respond to emergency call outs as scheduled CERTIFICATIONS, LICENSES, ECT:Must possess and maintain a valid motor vehicle operator's license and a driving record satisfactory to the company and its insurers and must be willing to use personal and/or company vehicle in the course of employment.Must obtain and/or meet all requirements to enter foreign trade zones; such as background checks by both the U.S. Coast Guard and the Department of Homeland Security, i.e. obtain and maintain a Transportation Workers Identification Card (TWIC).Must be able to pass a Drug and Alcohol test along with a Hair follicle test. Must possess Safety training/certification as required by customers to work in their facilities and as required by Kinder Morgan at all locations Must be able to complete/pass DISA/ISTC background check and testing for entrance into refinery.WORKING CONDITIONS/PHYSICAL DEMANDS:Understand and comply with customer and Kinder Morgan's rules and policies.Must be willing and able to work as a part of team, take direction from supervisor(s), keep required work schedules, focus attention to details, and follow work rules.Regularly required to stand, walk, climb, bend, squat, reach, etc. for extended periods of time.Ability to handle evolving conditions.Ability to identify, report, and correct safety and environmental concerns.This position consist of outside work and adverse weather conditions may apply.Must be able to work in dusty environment Must wear FRC clothing.Must be able to lift 70 pounds Physically able to handle large tools, climb on and off the equipment, ascend and descend ladders, and should not have a fear of heights While performing the duties of this job the employee is regularly exposed to moving mechanical part, fumes, airborne particles, outside weather conditions and vibration. The employee is frequently exposed to high, precarious places and risk of electrical shock and loud noise levels.Must be self-motivated and self-starter.The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required. * Must live within 40 miles of reporting location

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A/Lead requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 11,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A/Lead requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 11,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 11,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required. Equal Opportunity Employer/Minority/Female/Disabled/Veteran The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER: The above statements, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the operation of compressors, motors, cooling equipment, pumps, valves, pipelines and other related gas processing equipment. This position ensures the cost effective and efficient operation of gas processing and treating units and associated equipment within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Operate, inspect, and maintain equipment and systems at plant facilities which includes, but is not limited to: cryogenic plants, hydrocarbon fractionation units, process controls and measurement, LNG facilities, engines and compressors, pumps, pump stations, pressure relief systems, instrument air systems, dehydrators, fuel systems, treating, emergency shutdown systems, reciprocating compressors, gas fired heaters, process pumps, amine treating systems, inlet gas receivers and NGL storage and transfer facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Seek to optimize processing through facility by maintaining proper product specifications * Respond to alarms and problems within the plant and takes corrective measures * Monitor and control pressures, temperatures, flow rates, and levels to efficiently achieve desired operating results and ensure proper operation of equipment under current process conditions such as Start/Stop/Rate adjustment of equipment * Demonstrated understanding in the maintenance and compliance of plant operations in alignment with partnership and environmental standards (PSM-SPCC-TNRCC) including the creation and maintenance of required reporting and readings * Maintain and adhere to required trainings, policies, and procedures * Where applicable, the selected candidate will be required to pass all PSM-required operator certifications * Actively participate in safety programs and initiatives * Communicate with partnership control centers, business groups, and other operating groups as necessary * Oversee the construction and/or maintenance activities performed by third parties * May perform lab tests for quality assurance, diagnose mechanical problems, complete minor repairs as needed, assist other technical staff and any other tasks as assigned or required * May monitor field compressor status through the use of SCADA * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement * Ability to work in a 24/7 operational environment, shift rotations, and perform call outs * Must be able to react to high stress/emergency situations in a deliberate, thoughtful, and timely manner Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation. * HIMI software operations experience The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required.

Residency required in Dalhart, TX. THIS JOB DESCRIPTION DOES NOT ATTEMPT TO LIST ALL OF THE DUTIES THAT ARE OR MAY BE PERFORMED IN THIS POSITION 1. Performs basic, routine work using clearly prescribed procedures. Seeks advice and guidance for any deviations from the norm. 2. Assists in the installation and maintenance of natural gas lines, meters and regulators. 3. May assist in conducting leakage surveys. 4. Completes and maintains accurate records and reports to comply with Company and regulatory requirements. OTHER DUTIES/RESPONSIBILITIES 1. May be required to hold stand-by duty, work shifts, holidays, weekends, emergency call outs, and occasional extended hours. 2. Is subject to reporting outside regular work area. 3. Identifies, addresses, and reports safety and encroachment issues to their resolution and completion. 4. Is responsible for the safe operation and inspection of assigned Company vehicles and equipment. 5. Demonstrates support for and adheres to the Company's values, strategies, policies and procedures and learns the core values of AtmoSpirit, Customer Service, Safety and the Company's Code of Conduct both as an individual contributor, team member and/or leader of others. 6. Must become familiar with the contents of the Safety Manual, live by the spirit of its intent and become involved in creating and maintaining a safe working environment. Must complete all required safety training. MINIMUM REQUIREMENTS Educational/Experience Level Requires a general educational knowledge normally acquired through a high school diploma or a General Equivalency Diploma (GED). Requires valid driver's license in accordance with Company standards. Certificates, Licenses, etc. While at this level, completes assigned classes, Operator Qualifications (OQ) and OJT specific to Construction Learning Path. Must obtain and maintain position Operator Qualifications (OQs) and classroom training for position and any other required OQs and classroom training or certifications. Computer Skills Requires ability to utilize the Company's internet/intranet web site and available resources for data entry, reference and/or retrieval tasks. Communication Skills Requires the ability to communicate with internal/external customers in order to obtain and/or provide basic types of factual information. Work Conditions Works outdoors in all types of weather and may be exposed to extremes of climate and temperatures, high noise levels, rough terrain, and occasional work on ladders, roofs, attics, and under houses as well as confined spaces. May require overnight travel. May have residence requirement due to call-out response time. Works as an individual contributor and/or as member of a team. Physical Demands 1. Ability to lift 88 pounds from the ground to 38 inches. (Ex: lifting and carrying a jackhammer). 2. Ability to carry 88 pounds a distance of 5 feet. (Ex: lifting and carrying a jackhammer). 3. Ability to generate 100-foot pounds of pulling force at a contact point of 25 inches. (Ex: pulling manhole cover). 4. Ability to bend, stoop, squat, kneel, and/or crouch. Other Requirements As a Safety-Sensitive position, pre and post employment screenings, including but not limited to drug testing as outlined by the Department of Transportation (DOT) and Pipeline & Hazardous Materials Safety Administration (PHMSA), and motor vehicle record (MVR) background checks are required. Atmos Energy Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. At Atmos Energy, we enjoy an employee-focused culture with rewarding work, competitive pay, work-life balance, inclusion and diversity, and excellent benefits. Atmos Energy offers benefit eligibility on the first day of employment and they include: Company-Provided Benefits Holidays and Paid Time Off Parental Leave Retirement Savings Plan (Matching and Fixed Annual Company Contribution) Annual Bonus Opportunity Employee Assistance Program Short-Term and Long-Term Disability Plans Basic Life Insurance Health Savings Account (HSA) Company Contribution with HDHP Employee Assistance Program Wellness Programs LifeLock Identity Theft Protection Paid Training Linked-In Learning Voluntary Benefits Retirement Savings Plan Medical Insurance and Prescription Drug Coverage Dental Insurance Vision Insurance Employee/Dependent Life Insurance Employee/Dependent Accidental Death & Dismemberment Insurance Healthcare, Dependent Care and Limited Purpose Flexible Spending Accounts Top Employer Recognitions America's Best Employers - Forbes Magazine The 100 Most Trustworthy Companies in America - Forbes Magazine Top Places to Work - Dallas Morning News Best Places to Work - Mississippi Business Journal Best Place to Learn - Dallas Chapter of the American Society for Training and Development (ASTD) Job Family: Service and Construction

THIS JOB DESCRIPTION DOES NOT ATTEMPT TO LIST ALL OF THE DUTIES THAT ARE OR MAY BE PERFORMED IN THIS POSITION Primary Duties 1. Performs basic, routine work using clearly prescribed procedures. Seeks advice and guidance for any deviations from the norm. 2. Assists in the installation and maintenance of natural gas lines, meters and regulators. 3. May assist in conducting leakage surveys. 4. Completes and maintains accurate records and reports to comply with Company and regulatory requirements. OTHER DUTIES/RESPONSIBILITIES 1. May be required to hold stand-by duty, work shifts, holidays, weekends, emergency call outs, and occasional extended hours. 2. Is subject to reporting outside regular work area. 3. Identifies, addresses, and reports safety and encroachment issues to their resolution and completion. 4. Is responsible for the safe operation and inspection of assigned Company vehicles and equipment. 5. Demonstrates support for and adheres to the Company's values, strategies, policies and procedures and learns the core values of AtmoSpirit, Customer Service, Safety and the Company's Code of Conduct both as an individual contributor, team member and/or leader of others. 6. Must become familiar with the contents of the Safety Manual, live by the spirit of its intent and become involved in creating and maintaining a safe working environment. Must complete all required safety training. MINIMUM REQUIREMENTS Educational/Experience Level Requires a general educational knowledge normally acquired through a high school diploma or a General Equivalency Diploma (GED). Requires valid driver's license in accordance with Company standards. Certificates, Licenses, etc. While at this level, completes assigned classes, Operator Qualifications (OQ) and OJT specific to Construction Learning Path. Must obtain and maintain position Operator Qualifications (OQs) and classroom training for position and any other required OQs and classroom training or certifications. Computer Skills Requires ability to utilize the Company's internet/intranet web site and available resources for data entry, reference and/or retrieval tasks. Communication Skills Requires the ability to communicate with internal/external customers in order to obtain and/or provide basic types of factual information. Work Conditions Works outdoors in all types of weather and may be exposed to extremes of climate and temperatures, high noise levels, rough terrain, and occasional work on ladders, roofs, attics, and under houses as well as confined spaces. May require overnight travel. May have residence requirement due to call-out response time. Works as an individual contributor and/or as member of a team. Physical Demands 1. Ability to lift 88 pounds from the ground to 38 inches. (Ex: lifting and carrying a jackhammer). 2. Ability to carry 88 pounds a distance of 5 feet. (Ex: lifting and carrying a jackhammer). 3. Ability to generate 100-foot pounds of pulling force at a contact point of 25 inches. (Ex: pulling manhole cover). 4. Ability to bend, stoop, squat, kneel, and/or crouch. Other Requirements As a Safety-Sensitive position, pre and post employment screenings, including but not limited to drug testing as outlined by the Department of Transportation (DOT) and Pipeline & Hazardous Materials Safety Administration (PHMSA), and motor vehicle record (MVR) background checks are required. Atmos Energy Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. Job Family: Service and Construction

THIS JOB DESCRIPTION DOES NOT ATTEMPT TO LIST ALL OF THE DUTIES THAT ARE OR MAY BE PERFORMED IN THIS POSITION 1. Performs basic, routine work using clearly prescribed procedures. Seeks advice and guidance for any deviations from the norm. 2. Assists in the installation and maintenance of natural gas lines, meters and regulators. 3. May assist in conducting leakage surveys. 4. Completes and maintains accurate records and reports to comply with Company and regulatory requirements. OTHER DUTIES/RESPONSIBILITIES 1. May be required to hold stand-by duty, work shifts, holidays, weekends, emergency call outs, and occasional extended hours. 2. Is subject to reporting outside regular work area. 3. Identifies, addresses, and reports safety and encroachment issues to their resolution and completion. 4. Is responsible for the safe operation and inspection of assigned Company vehicles and equipment. 5. Demonstrates support for and adheres to the Company's values, strategies, policies and procedures and learns the core values of AtmoSpirit, Customer Service, Safety and the Company's Code of Conduct both as an individual contributor, team member and/or leader of others. 6. Must become familiar with the contents of the Safety Manual, live by the spirit of its intent and become involved in creating and maintaining a safe working environment. Must complete all required safety training. MINIMUM REQUIREMENTS Educational/Experience Level Requires a general educational knowledge normally acquired through a high school diploma or a General Equivalency Diploma (GED). Requires valid driver's license in accordance with Company standards. Certificates, Licenses, etc. While at this level, completes assigned classes, Operator Qualifications (OQ) and OJT specific to Construction Learning Path. Must obtain and maintain position Operator Qualifications (OQs) and classroom training for position and any other required OQs and classroom training or certifications. Computer Skills Requires ability to utilize the Company's internet/intranet web site and available resources for data entry, reference and/or retrieval tasks. Communication Skills Requires the ability to communicate with internal/external customers in order to obtain and/or provide basic types of factual information. Work Conditions Works outdoors in all types of weather and may be exposed to extremes of climate and temperatures, high noise levels, rough terrain, and occasional work on ladders, roofs, attics, and under houses as well as confined spaces. May require overnight travel. May have residence requirement due to call-out response time. Works as an individual contributor and/or as member of a team. Physical Demands 1. Ability to lift 88 pounds from the ground to 38 inches. (Ex: lifting and carrying a jackhammer). 2. Ability to carry 88 pounds a distance of 5 feet. (Ex: lifting and carrying a jackhammer). 3. Ability to generate 100-foot pounds of pulling force at a contact point of 25 inches. (Ex: pulling manhole cover). 4. Ability to bend, stoop, squat, kneel, and/or crouch. Other Requirements As a Safety-Sensitive position, pre and post employment screenings, including but not limited to drug testing as outlined by the Department of Transportation (DOT) and Pipeline & Hazardous Materials Safety Administration (PHMSA), and motor vehicle record (MVR) background checks are required. Atmos Energy Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. Job Family: Service and Construction