Environmental chemist entry level jobs

We seek an experienced Quality Specialist to work directly with our customer sites and installation teams to ensure quality standards are adhered to in all aspects of installations while acting as a catalyst for continuous improvement in our products and systems. This role will interface with install partners, equipment suppliers, sub-tiers, engineering, program team, and sourcing to drive high levels of quality and field reliability in critical sub-systems and components. This position will require both a collaborative nature and ability to influence across organizational lanes, partners, suppliers, and customers. Responsibilities and Duties: + Become familiar with the project technical requirements such as the specifications, installation SOP's, SOW Terms & Conditions and applicable standards. + Execute the Site Installation Quality checklist, ensuring that all in scope work is performed per pre-defined standards and deficiencies are reported to and resolved with the relevant Installation Contractors. + Provide Quality leadership at customer installation sites, focusing on identification and timely resolution of issues via structured quality methods. + Provide surveillance of installation partners to ensure that all installation processes are complied with and critical to quality parameters adhered to. + Communicate issues across our operations team and drive closed loop problem resolution. + Provide weekly Quality Status reporting outlining accomplishments, 2 week look ahead plan and any blockers + Inspire others to share acquired knowledge and can take a supportive role during technical discussions. + Hold quality kickoff meeting with contractors. + Notify project management team of any issues found in the field or instances where contractors not following the quality plan. + Attend morning job huddle meetings and be aware of all work being performed that day by various installation contractors. + Verify calibrated tools are in valid working condition. + Work with construction on closing installation deficiencies and NCR's. + Mentor & coach site personnel to efficiently execute quality SOPs to identify and resolve issues. Job Type & Location This is a Contract position based out of Grove City, OH. Pay and Benefits The pay range for this position is $20.00 - $27.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Grove City,OH. Application Deadline This position is anticipated to close on Dec 15, 2025. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

About Us Groundbreaker. Game changer. Pioneer. TRC has long set the bar for clients who require more than just engineering, combining science with the latest technology to devise innovative solutions that stand the test of time. From pipelines to power plants, roadways to reservoirs, schoolyards to security solutions, clients look to TRC for breakthrough thinking backed by the innovative follow-through of an industry leader. TRC's professionals work with a broad range of commercial, industrial and government clients and the communities they serve. We deliver breakthrough solutions that address local needs -- so our clients can better succeed in an ever-changing world. Working at TRC means tackling interesting, meaningful projects. We pride ourselves on our collaborative spirit, entrepreneurial zeal and agile corporate structure. We recognize that the expertise of our staff is our strongest asset, so we generously reward employees for successful performance and invest in their careers through training and the development of new skills and certifications. Overview Looking to make a difference with your work and create a positive impact on the environment? TRC is seeking an entry-level Environmental Scientist in the Air Measurements Practice of our Warrendale, PA or Groveport, OH office to assist with the performance of air emissions testing projects at various industrial facilities. Our projects help industry achieve environmental compliance while maintaining productivity. Join a great team of established professionals who will show you the ropes of an exciting career in air quality. This is an excellent opportunity to develop or expand a professional career. TRC values safety, ethics and integrity, and offers the ability to develop or expand meaningful work for a range of clients. TRC Companies, Inc., a pioneer in groundbreaking scientific and engineering developments since the 1960s, is a national engineering consulting and construction management firm that provides integrated services to the energy, environmental and infrastructure markets. TRC serves a broad range of clients in government and industry, implementing complex projects from initial concept to delivery and operation. Responsibilities * Projects involve a considerable amount of overnight travel, projects may be all over the country. The field-testing portion of each project typically lasts from 1 to 5 days and the test teams are generally home on the weekends, but some projects may require working or traveling on a weekend. The number of people needed in the field and the number of days in the field, varies with each project and changes from week to week. Expect 75% of the weeks to involve field work. * When not in the field, duties may include equipment calibrations and repairs, prep and packing for future projects, data reduction and processing, report writing, and tasks of that nature. * During testing, the Environmental Scientist will be at the location recording data, operating equipment, or working in the trailer recovering samples, performing analysis, etc. * The Environmental Scientist will become proficient in the various EPA sampling methods and develop knowledge about many types of industrial processes. The experienced Environmental Scientist typically advances into either a client-oriented career path of project management and business development or into a technical oriented career path working with the latest monitoring and analytical equipment. Qualifications * Must be able to comfortably lift and carry 50 pounds. The testing projects can involve moving equipment to, and working at, elevated test locations, such as an exhaust stack platform or a rooftop. Access to the test location may be by elevator, stairs, or a ladder. * Must be able to work comfortably throughout all the seasons as much of the work is outdoors. * Completion of assigned responsibilities in a team setting with strong written and oral communication skills, and moderate computer skills. * Successful completion of a background check and drug test (including marijuana) prior to employment or within five working days from date of hire. Once hired, participation in the TRC random drug testing program. * Possession of a valid driver's license and successful completion of a pre-employment motor vehicle records check to confirm a good driving record. Once hired, maintaining valid DOT driver status (not Commercial Driver's License) is required. * Successful completion of all required annual safety training. * College degree is required, science or engineering preferred. For someone who likes to travel and see new places, likes working outside and not being tied to a desk, has an interest in all kinds of industrial processes, and enjoys working as a contributing member of a team on a wide variety of short projects, this can be a very rewarding job. TRC offers advancement through our "Performance Management and Career Development Program", with competitive compensation and a benefits package including a 401(k) plan with company match. For more information, please visit our website at ***************************** Benefits*: TRC offers a competitive benefit package consisting of: * Medical, dental, vision, and disability insurance. * 401k package that includes both traditional and Roth IRA options and Company match. * Paid time off contingent upon full time or part time status and level of seniority (ranging from 15 to 25 days per year). * All full-time employees enjoy a minimum of 8 Paid Holidays per year. * TRC ensures that all employees, including those that work part-time, receive paid sick, family, and disability leave in accordance with the laws of their state of residence. * These benefits are applicable to US employees depending on their employment status (full time, part time, or temporary). TRC offers jurisdiction specific benefit packages for International and Puerto Rico employees. Compensation: In accordance with local law, the below salary range is applicable for the job and location associated with this requisition. Compensation will vary based upon experience, education, skill level, geographical location, and other compensable factors. Other Compensation: Employee may be eligible for participation in the Company's annual Discretionary Bonus Program which is contingent on Company, Business Segment, and Individual performance against Key Performance Indicators which vary by year and employee. Disclaimers TRC is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable law. All employment decisions are made based on qualifications, merit, and business needs. We celebrate diversity and are committed to creating an inclusive environment for all employees. The complete job description and application are available on TRC's career site. TRC accepts applications for this position on an ongoing, rolling basis and reserves the right to cancel this posting at any time. Salary Range USD $22.00 - USD $44.00 /Hr.

Flexsys is a global supplier of rubber chemicals and solutions including insoluble sulfur, anti-degradants, and post vulcanization stabilizers. The company's focus is on delivering better solutions for manufacturers of tires and other rubber products that enhance product performance, optimize production efficiency, and ensure supply chain success. As a leading global manufacturer of tire additives, Flexsys brings a track record of innovation, quality, specialized expertise, a highly collaborative approach, and a commitment to growth - working together with our customers as a valuable partner, helping to meet their critical objectives. Flexsys has an immediate opening for an analytical chemist in the Akron corporate headquarters. This position will support our business and innovation platforms. The ideal candidate will have hands-on expertise in multiple analytical techniques. The candidate needs to be an innovative and creative problem solver with strong scientific convictions who is willing to take risks. This role will report to the Characterization group leader. Qualifications Required Degree: PhD in analytical chemistry, physical chemistry or similar discipline 0-5 years of experience post PhD Required Experience in analysis of organic molecules Application of analytical tools in support of projects Clear and effective writing and oral communication skills Ability to work in a highly collaborative team environment Highly desired Hands-on experience in chromatography and spectroscopy Fundamental understanding of separation science Fundamental understanding of the physics of absorption spectroscopy and/or mass spectrometry Experience in statistics Candidate should be motivated to develop into a company expert in analytical chemistry. Requirements Job Responsibilities · Employ the latest analytical technology and sound analytical principles to solve major technical problems · Make data driven decisions to ensure project success · Evaluate and develop new laboratory capabilities and lead efforts to implement them · Collaborate with other scientists and technicians to provide key analytical data for new products and process development · Utilize multiple analytical techniques for the characterization and performance evaluation of novel organic molecules · Operate, maintain, and troubleshoot analytical instrumentation · Review and write test methods and technical reports Flexsys is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or any other characteristics protected by law. Flexsys is committed to creating a powerfully diverse workforce and a broadly inclusive workplace, where everyone can contribute to their fullest potential each day.

Clean Harbors in Cincinnati, OH is seeking an Environmental Field Chemist (CleanPack Chemist) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily. The Environmental Field Chemist are (NOT) laboratory-based Chemist. Required Qualifications: * Valid Driver's license * Strong customer service skills * By position, obtain a CDL Class B with hazmat and tanker endorsement within 6 months of employment * Perform physical functions per job requirements * Successfully complete a background check, drug test, and physical, by position * Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: * College degree in Chemistry or Natural Science * Previous experience in Environmental Services (i.e. remediation, abatement, emergency spill response, etc.) Our Environmental Field Chemist is an entry level position into an exciting and rewarding career at Clean Harbors. Transitioning Military, this is a great opportunity to leverage your skills, experience, and training as you return to civilian life. This position is an entry level management position. From this role, there are approximately 15 other roles one can be promoted into within Clean Harbors. A significant number of our middle and senior management staff all started in this role, from less than 5 years ago to 30 plus years ago. Many others who have started in this role have significant positions within our customers as Environmental Health and Safety staff members at significant universities, pharmaceutical manufacturers as well as other customers. We will accelerate your training, so you learn the skills and knowledge to succeed in this position and start your career. You can work in any of our 200+ branch locations and can transfer internally. After successfully learning this position in approximately 18 to 36 months, then you will have the opportunity to move into a Salary Management position. Clean Harbors Technical Services * Waste Disposal - Comprehensive disposal of hazardous and non-hazardous waste at Company-owned facilities * Recycling Services - Extensive recycling, reuse and reclamation options for materials such as solvents, chemicals, oil and electrical equipment * Chemical Packing - Safe, efficient handling and disposal of the widest range of chemicals, including reactives and compressed gases * Household Hazardous Waste (HHW) Services - HHW collection programs of all types and sizes, facilitated by Clean Harbors expert personnel Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ******************** or **************. Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #CH Key Responsibilities: * Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner * Prepare computer generated packing lists, labels, manifest, and land disposal restriction notifications * Perform inspections of staging, accumulating and storage areas to ensure proper housekeeping procedures and compliance * Inspect storage area and drums for leaks or spills * Inspect drums for compliance with labeling regulations * Collects, segregates, and properly packages waste chemicals for disposal to maximize efficiency and maintain compliance * Executes Jobs at Clean Harbors customer locations including fortune 500 companies * Responsible for final preparation and approval of all projects before shipment in accordance with OSHA, EPA, DOT and company policies * Conducts projects/jobs according to site specific Federal, State, and local regulations and health and safety plans * Understand customer specific disposal restrictions/special packaging requirements * Sample and profile of new waste streams or any waste needing analytical testing * Ensures drum count is correct and that drum conditions are shippable in accordance our company's policies and procedure * Follow all local, state (provincial) and federal compliance regulations and rules * Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements * Safely observe all corporate operating guidelines and procedures * Observe all company environmental health and safety operating guidelines * Perform other duties as assigned

System One is seeking a NDE Quality Oversight professional for a long-term contract to hire, full time opportunity, onsite in Orville, Ohio. The ideal candidate will have a strong background in nuclear quality assurance, NDE, and fabrication operations, with a deep understanding of NQA-1 and ASME standards. This role will focus on ensuring quality through oversight, auditing, and compliance within a nuclear fabrication environment. Responsibilities: + Provide quality assurance oversight of NDE (Non-Destructive Testing) and fabrication operations. + Ensure compliance with NQA-1, ASME, and other nuclear quality standards. + Conduct audits to maintain quality program integrity. + Review and approve procedures, ensuring alignment with applicable standards. + Generate and review final quality packages for completeness and accuracy. + Collaborate with teams to identify and resolve quality issues. Qualifications: + Required Experience: + Hands-on expertise in nuclear quality programs, including NQA-1 and ASME standards. + Proficiency in NDE techniques and fabrication processes. + Experience in auditing, procedure review, and final package generation. + Must be local to Orrville, OH or willing to commute (no per diem provided). + Strong communication and organizational skills. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #161-Managed Staffing Charlotte System One, and its subsidiaries including Joulé, ALTA IT Services, CM Access, TPGS, and MOUNTAIN, LTD., are leaders in delivering workforce solutions and integrated services across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible full-time employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.

* Branch Details * Line Leader - 3rd Shift ? $18/hr Monday-Friday ? 4 PM - 12:33 AM ? Temp-to-Hire Opportunity We are seeking a reliable and detail-oriented Line Leader/Quality Control to join our 2nd shift production team. Key Responsibilities: * Perform in-process and final inspections to ensure product quality * Accurately document findings and maintain quality records * Identify and report any defects or deviations from specifications * Ensure compliance with all company standards, GMP, and safety protocols * Requirements: * Prior experience in quality control or a manufacturing environment is preferred * Must have strong attention to detail and basic math/measurement skills * Ability to work independently in a fast-paced setting * Must be able to stand for long periods and lift up to 30 lbs * Basic background check required * Must train on 1st or 2nd shift * Workplace Requirements: * No jewelry, shorts, or clothing with holes * PPE (Personal Protective Equipment) will be provided and must be worn at all times Columbus OH 3100

Clean Harbors in Cincinnati, OH is seeking an Environmental Field Chemist (CleanPack Chemist) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily. The Environmental Field Chemist are (NOT) laboratory-based Chemist. Mus be willing otain a CDL Class B with hazmat and tanker endorsement within 6 months of employment Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Why work for Clean Harbors? Health and Safety is our #1 priority and we live it 3-6-5! Focus on maintaining sustainability and cleaning the Earth Pay Range: $22.00 -$24.00 per hour, BOE Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Company paid training and tuition reimbursement Required Qualifications: Valid Driver's license Strong customer service skills By position, obtain a CDL Class B with hazmat and tanker endorsement within 6 months of employment Perform physical functions per job requirements Successfully complete a background check, drug test, and physical, by position Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: College degree in Chemistry or Natural Science Previous experience in Environmental Services (i.e. remediation, abatement, emergency spill response, etc.) Our Environmental Field Chemist is an entry level position into an exciting and rewarding career at Clean Harbors. Transitioning Military, this is a great opportunity to leverage your skills, experience, and training as you return to civilian life. This position is an entry level management position. From this role, there are approximately 15 other roles one can be promoted into within Clean Harbors. A significant number of our middle and senior management staff all started in this role, from less than 5 years ago to 30 plus years ago. Many others who have started in this role have significant positions within our customers as Environmental Health and Safety staff members at significant universities, pharmaceutical manufacturers as well as other customers. We will accelerate your training, so you learn the skills and knowledge to succeed in this position and start your career. You can work in any of our 200+ branch locations and can transfer internally. After successfully learning this position in approximately 18 to 36 months, then you will have the opportunity to move into a Salary Management position. Clean Harbors Technical Services Waste Disposal - Comprehensive disposal of hazardous and non-hazardous waste at Company-owned facilities Recycling Services - Extensive recycling, reuse and reclamation options for materials such as solvents, chemicals, oil and electrical equipment Chemical Packing - Safe, efficient handling and disposal of the widest range of chemicals, including reactives and compressed gases Household Hazardous Waste (HHW) Services - HHW collection programs of all types and sizes, facilitated by Clean Harbors expert personnel Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ******************** or **************. Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. #CH Key Responsibilities: Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner Prepare computer generated packing lists, labels, manifest, and land disposal restriction notifications Perform inspections of staging, accumulating and storage areas to ensure proper housekeeping procedures and compliance Inspect storage area and drums for leaks or spills Inspect drums for compliance with labeling regulations Collects, segregates, and properly packages waste chemicals for disposal to maximize efficiency and maintain compliance Executes Jobs at Clean Harbors customer locations including fortune 500 companies Responsible for final preparation and approval of all projects before shipment in accordance with OSHA, EPA, DOT and company policies Conducts projects/jobs according to site specific Federal, State, and local regulations and health and safety plans Understand customer specific disposal restrictions/special packaging requirements Sample and profile of new waste streams or any waste needing analytical testing Ensures drum count is correct and that drum conditions are shippable in accordance our company's policies and procedure Follow all local, state (provincial) and federal compliance regulations and rules Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements Safely observe all corporate operating guidelines and procedures Observe all company environmental health and safety operating guidelines Perform other duties as assigned

This is a remote part-time position only available to US residents of Ohio and Texas We are primarily looking to staff part time, Mon-Fri 8am-6pm EST/8am-5pm CDT This role is not eligible for anyone currently employed full time elsewhere Job Overview: This is a remote, part-time, entry-level position. We are looking for a Part Time Production QC Associate to help ensure the deliverability of our product. Production QC Associates primarily test our content by sending SMS messages across various providers and carriers and log the results, while making changes as necessary. You will be provided with a company laptop and set of three cell phones to use for testing. If you are a computer savvy person with a keen eye for detail, who's self-motivated and a quick learner, we are interested in hearing from you! Compensation: $10-12/hour Hours: Part time, 12-28 hours/week Mon-Fri (8am-6pm EST/8am-5pm CDT). Flexible hours to fit your schedule! Specific Duties, Activities, and Responsibilities: Test for the reliable delivery of SMS Text messages through extensive review of QC test results across multiple cellular carriers. Adjust, retest, and document changes made to SMS campaigns. Map specific pre-determined responses to frequent messages Assist with miscellaneous data audits as needed Skills/Qualifications: Computer capability - Microsoft Office (Word/Outlook/Excel) College level English language grammatical skills. Strong organizational skills - attention to detail, and exceptional verbal/ written skills Problem-Solving - ability to interpret data, draw conclusions, and spot trends. Work Ethic - Self-motivated and able to work independently or with a team Cell Phone Reception - It is a requirement that you have adequate cell phone reception with the following cellular carriers: AT&T, T-Mobile, and Verizon Wireless What is Drips? Drips is an AI driven conversational SMS marketing platform; the first Conversational Texting company of its kind, founding a new category and leading the way for some of the biggest brands in the world to improve engagement rates and outcomes for their prospects and customers. Operating completely remote, Drips helps clients increase lead conversions by communicating with their customers in the same way that people communicate with each other. Using conversational SMS, calls, email, and direct mail campaigns, Drips automates conversation in a way that works, and works well. Drips enables brands to connect with consumers through an AI-powered conversational outreach strategy that includes human-like two-way texting, scheduled calling, and voicemail messages. Backed by a proprietary natural language processing model, our platform has handled over half a billion humanized conversations to date, enabling us to deliver automation at a scale that no other competitor in the messaging industry has been able to match. That's why we're the platform of choice for some of the world's most recognizable brands. Drips' focus on empowering brands to capture intent and drive meaningful conversations has sparked rapid growth since the company was founded in 2016. And we are looking to accelerate the next era of growth and expansion of our team. Check us out! ************************** ****************************************** *************************************** **************************************

Duties & Responsibilities: Carry out Product Development Requests approved by management Reformulate HTV/LIMS products in order to meet/optimize performance based on requirements/specifications with managerial oversight Learn how to execute Design of Experiments (DOE) methodology and statistical software to optimize product performance and troubleshoot issues with a product Safely operate all equipment in the Technical Service & Development (TS&D) lab, including but not limited to: Flacktek speed mixers, double planetary mixers , banbury mixer, dough mixer, Moriyama mixer, 2 roll mill, 3 roll mill, extruder, heated press., etc. Maintain lab inventory on a weekly basis Collaborate with production and process engineer(s) to learn about processing of gums, HCR, LIMS Support Production product failures in providing product repairs/troubleshooting Conduct physical testing using tensometer, durometer, rheometers, viscometers, and other pieces of analytical equipment Author Technical Reports and Memos Perform other duties as assigned by manager Education & Experience: Bachelor of Science degree in Chemistry strongly preferred, other science/engineering related degrees will be considered Experience in polymer chemistry and/or formulation chemistry preferred Knowledge, Skills & Abilities: Scientific summarizing/presentation skills (experimental results) Strong mathematical skills and ability to problem solve and think creatively Strong computer literacy Excellent verbal, written, and interpersonal skill Must be able to work independently and in teams Ability to work effectively with other groups within the organization Willingness to take direction and carry out instructions from managers in an efficient manner Foster a productive and functional work environment Work Environment: This position operates in a laboratory setting, pilot/production plant, and professional office environment. The role routinely uses the following tools and equipment: Double Planetary Mixers, Speed Mixers, tensometer, durometer, rheometers, viscometers, banbury mixer, dough mixer, Moriyama mixer, 2 roll mill, 3 roll mill, extruder, heated press, etc. Physical Demands: Stands or walks 4hrs/day or more Works near or with mechanical equipment Sitting for extended periods of time relating to desk work, including, but not limited to computer, lab book documentation, research, etc. Handles hazardous and non-hazardous chemicals: organic solvents, silicones, silanes, catalysts, powders, volatile fluids, acids/bases, nitrogen gas, etc. Note: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Benefits The benefits at Shin-Etsu Silicones include: Medical, dental, vision, life insurance, short and long term disability insurance, 401(k) with company match, 10-paid holidays, vacation and personal time off, gym membership reimbursement. In addition to the benefits listed above, Shin-Etsu also offers: Job stability and security, excellent growth opportunities, a safe and clean work environment, a great reputation in the industry as a leading silicone manufacturer, an exceptional culture. Please visit our website at shinetsua.com for additional benefits information.

???????Quality Control Inspector duties and responsibilities A Quality Control Inspector performs assessment, documentation and organization tasks to support the efficiency and effectiveness of their organization's supply chain. Their duties and responsibilities include: Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions and examining functionality Checking that the assembly or production line adheres to standards and procedures and complying with legal requirements Reviewing blueprints and specifications to compare to produced goods Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database Training the production team on quality control measures to improve product excellence Proposing improvements to the production process Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements Updating job knowledge by engaging in educational opportunities and regular training Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** Position Summary: The Analyst, QC Aseptic Control (Night Shift) is responsible for reviewing sampling and laboratory data and autonomously performing tasks related to environmental monitoring to support regulatory requirements of a sterile manufacturing site. The position requires operating equipment in various classified/non-classified areas up to a Grade A aseptic environment and in a laboratory setting, and includes the maintaining of gowning qualification. This is a Night Shift position - 12-hour rotating schedule from 6pm - 6:30am (2 days on /2 days off /3 days on) Position Responsibilities: * Supports coordination of workflow for Environmental Monitoring team. * Verifies QC data, while monitoring for trends and abnormalities. * Performs project work and leads laboratory investigations. * Trained and able to perform all Environmental Monitoring technician responsibilities (including maintaining aseptic qualification) when needed. * Review completed production documentation (for example: logbooks) for quality, completeness, and cGMP (Good Manufacturing Practices) compliance. * Troubleshoots methods and processes. * Train others on systems, software, equipment, machines, procedures, and/or processes. * Answer compliance and process questions from others. * Communicate policies and procedures to employees. * Fill in for Analyst II/Team Lead when absent. * Gather, organize, and communicate operational information to others. * Lead and coordinate investigations and studies with little supervision. * Lead process improvement activities and teams to meet strategic goals. * Other duties that support Environmental Monitoring, Operations, or Laboratory processes may be assigned. Minimum Qualifications: * General experience in a pharmaceutical production or quality control environment (GMP/GDP) * Must have the ability to effectively understand, read, write, communicate and follow instructions in the English language. * Good attention to detail is required. Must be capable of keeping accurate records and performing mathematical calculations Preferred Qualifications: * Bachelor's degree, scientific discipline * Significant experience in a sterile or cGXP environment * Lab experience is a plus Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $24.00 - $34.50 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** Position Summary: The Analyst, QC Aseptic Control (Night Shift) is responsible for reviewing sampling and laboratory data and autonomously performing tasks related to environmental monitoring to support regulatory requirements of a sterile manufacturing site. The position requires operating equipment in various classified/non-classified areas up to a Grade A aseptic environment and in a laboratory setting, and includes the maintaining of gowning qualification. **This is a Night Shift position - 12-hour rotating schedule from 6pm - 6:30am (2 days on /2 days off /3 days on)** Position Responsibilities: Supports coordination of workflow for Environmental Monitoring team. Verifies QC data, while monitoring for trends and abnormalities. Performs project work and leads laboratory investigations. Trained and able to perform all Environmental Monitoring technician responsibilities (including maintaining aseptic qualification) when needed. Review completed production documentation (for example: logbooks) for quality, completeness, and cGMP (Good Manufacturing Practices) compliance. Troubleshoots methods and processes. Train others on systems, software, equipment, machines, procedures, and/or processes. Answer compliance and process questions from others. Communicate policies and procedures to employees. Fill in for Analyst II/Team Lead when absent. Gather, organize, and communicate operational information to others. Lead and coordinate investigations and studies with little supervision. Lead process improvement activities and teams to meet strategic goals. Other duties that support Environmental Monitoring, Operations, or Laboratory processes may be assigned. Minimum Qualifications: General experience in a pharmaceutical production or quality control environment (GMP/GDP) Must have the ability to effectively understand, read, write, communicate and follow instructions in the English language. Good attention to detail is required. Must be capable of keeping accurate records and performing mathematical calculations Preferred Qualifications: Bachelor's degree, scientific discipline Significant experience in a sterile or cGXP environment Lab experience is a plus Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $24.00 - $34.50 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

Requirements Quality Control Associate Minimum Qualifications: Must be 18 years or older to apply. Language Skills: Ability to read, analyze, and interpret general business periodicals, technical procedures, or governmental regulations. Mathematical Skills: Ability to apply concepts of basic math. Reasoning Ability: Ability to solve practical problems and interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Essential Job Functions: Critical features of the Quality Control Associate are described below. They may be subject to change at any time due to reasonable accommodation or other reasons. Mental: Must be able to effectively communicate with others; complete and understand analysis of numbers; read, analyze and interpret written materials; compliance with company policies; respond appropriately to feedback to make improvements; maintain positive working relationships; troubleshoot and solve problems. Physical: Must be able to hear and verbally communicate. Must be able to lift up to 50 lbs, sit, stand, and walk for hours at a time. Moderate noise level and limited exposure to physical risk. Knowledge, Skills, and Abilities Required: Ability to establish priorities, work independently with minimal supervision, and facilitate teamwork. Basic computer skills needed to use various software packages. Equipment Used: Pallet Jack, computer, basic office equipment Special/ Additional Requirements: Persons in this position may be required to pass a drug, alcohol, and/or criminal background check. AMT is an Equal Opportunity/Affirmative Action Employer. Benefits: Insurance: AMT offers major medical, dental, and vision insurance at the first of the month following 30 days of service. Other Benefits: AMT offers several other voluntary benefits including hospital indemnity, critical illness, term life insurance & long term disability (company paid), among others. 401k: AMT matches 100% of your contribution, up to 3% of your salary. Paid Time Off (PTO): In addition to nine paid holidays, AMT provides employees with paid time off (determined by length of service), starting on day one Other Exciting Perks! Tuition Reimbursement Employee Assistance Program Annual Employee Appreciation Picnic! Employee Referral Bonus Program Work Conditions: Clean work environment that is located in an air conditioned and temperature controlled environment. You are also allowed to have in headphones and listen to music as you work! Salary Description $18.50/hr

1st Shift - $18.50/hr starting, 19.00/hr fully trained! Schedule: Monday - Friday 7:00am - 3:30pm Since 1985, our core business has been enteral device product development, design, manufacturing, and engineering in a state-of-the-art facility near Cleveland, Ohio. AMT's steady growth consistently creates job opportunities in Northeast Ohio. We are always searching for new talent and would love for you to join our team! We strive to keep the small company feeling while still reaching users all over the globe. Quality Control Associate Position Summary: Process work orders by filling orders with raw materials for production floor. Package finished goods for shipment. Quality Control Associate Duties and Responsibilities: This list is not comprehensive but meant to represent the most common or important duties of the position. Other duties are required and/or assigned * Package finished product for shipping (boxing and labeling). * Stage finished product for loading. * Responsible for quality control. No damaged product is sent out. No damaged raw material is accepted in. * Fulfilling daily orders. * Clean and maintain work area. * Other duties as assigned. Requirements Quality Control Associate Minimum Qualifications: * Must be 18 years or older to apply. Language Skills: * Ability to read, analyze, and interpret general business periodicals, technical procedures, or governmental regulations. Mathematical Skills: * Ability to apply concepts of basic math. Reasoning Ability: * Ability to solve practical problems and interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Essential Job Functions: Critical features of the Quality Control Associate are described below. They may be subject to change at any time due to reasonable accommodation or other reasons. * Mental: Must be able to effectively communicate with others; complete and understand analysis of numbers; read, analyze and interpret written materials; compliance with company policies; respond appropriately to feedback to make improvements; maintain positive working relationships; troubleshoot and solve problems. * Physical: Must be able to hear and verbally communicate. Must be able to lift up to 50 lbs, sit, stand, and walk for hours at a time. Moderate noise level and limited exposure to physical risk. Knowledge, Skills, and Abilities Required: Ability to establish priorities, work independently with minimal supervision, and facilitate teamwork. Basic computer skills needed to use various software packages. Equipment Used: Pallet Jack, computer, basic office equipment Special/ Additional Requirements: Persons in this position may be required to pass a drug, alcohol, and/or criminal background check. AMT is an Equal Opportunity/Affirmative Action Employer. Benefits: * Insurance: AMT offers major medical, dental, and vision insurance at the first of the month following 30 days of service. * Other Benefits: AMT offers several other voluntary benefits including hospital indemnity, critical illness, term life insurance & long term disability (company paid), among others. * 401k: AMT matches 100% of your contribution, up to 3% of your salary. * Paid Time Off (PTO): In addition to nine paid holidays, AMT provides employees with paid time off (determined by length of service), starting on day one Other Exciting Perks! * Tuition Reimbursement * Employee Assistance Program * Annual Employee Appreciation Picnic! * Employee Referral Bonus Program * Work Conditions: Clean work environment that is located in an air conditioned and temperature controlled environment. You are also allowed to have in headphones and listen to music as you work!