EQT jobs in Pittsburgh, PA - 10985 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC is an industry leading, dynamic company that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC provides compensation, incentives and benefits that allow our employees to build careers - not just work a job. “2022 & 2023 Top Companies for Women to Work For in Transportation” Awarded by the official magazine of the Women In Trucking Association. Job Description Marathon Petroleum Company LP (MPC) has a position available for a professional, local (home daily), transport driver. Our drivers are responsible for the safe and efficient delivery of petroleum products from various loading locations to various delivery points and customers. Transport drivers independently follow policies, procedures, and standards. Marathon transportation has one common vision: no accidents, no injuries, while being good stewards of the environment. Inclusive Benefits. Local Routes. Safety First. Outstanding Training. Click Here for more reasons why MPC is the last stop for many drivers. Benefits Total compensation up to $130,000 Hourly Rates: $33.05-$34.79 Insurance: Health/Dental/Vision coverage available day 1 Retirement: 401k with company match up to 7% Pension: Company funded pension plan up to 11% Annual bonus: Eligible for company sponsored annual bonus. Paid parental leave. Education reimbursement For full benefit details visit ********************* Minimum Qualifications Active Class A Commercial Driver's License Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must register with FMCSA Drug & Alcohol Clearinghouse and provide consent to company for review of clearinghouse records. Must be able to drive interstate. Active CDL Endorsements: Hazardous Materials and Tank Vehicle (Required) License - Restrictions: Must be able to operate a manual transmission (13 speed) Shift Requirements Must be able to work up to a 12-hour AM/PM shift. Must be able to work hours beyond schedule Job Responsibilities Perform pre-trip inspection on equipment in alignment with MPC policy and Department of Transportation (DOT) regulations. Check tank truck/trailer or tractor/trailer for general operating requirements and make sure that all required equipment is available and in good operating condition. Note inspection and deficiencies on the pre-trip inspection form. Drive a tank truck/trailer or tractor/trailer to transport product in a safe, efficient, and professional manner. Obey all applicable federal, state and local laws. Follow MPC and site specific standard operating procedures for the loading and offloading process. Perform post-trip inspection on equipment in alignment with MPC policy and DOT regulations. Complete all regulatory and customary paperwork. Ensure equipment is ready for the next shift. Communicate all incidents, including safety and environmental concerns, according to company procedures. Report all equipment issues in a timely manner. Follow, maintain, and adhere to all safety rules and operating procedures, including all DOT regulations. Physical Requirements Must be able to work outside in all types of weather conditions. Must be able to work on elevated spaces: 30+ feet on graded elevation. Must be able to frequently lift, carry, push, and/or pull 50-65 lbs. Must be able to sit for extended periods of time. Must be able to grip a steering wheel for extended periods of time. Screening Requirements Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must pass required drug and alcohol screening(s). Must complete DOT physical and maintain current medical card. Must pass three-year DOT safety background check and seven-year criminal background check. Must pass pre-trip exam and road test to demonstrate proficiency operating required equipment. #TR Are You Ready to Roll? Apply here now or visit **************************** for more information. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Cadiz, Ohio Additional locations: Job Requisition ID: 00019814 Location Address: 43073 Industrial Park Rd Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Power your Career with Trinity Solar and earn Great Pay doing it. We've created a personal development program for Entry Level Sales Representatives that is designed to bring out the best of your sales skills. Previous experience is NOT necessary, as we offer paid training and ongoing support. Just bring your pleasant people skills! Any previous customer service, inside or outside sales, or customer interfacing experience is a plus. Work for a company with purpose and get paid a base salary with commissions while growing a stable sales career. We pay you for training so you can know you're taken care of. On top of that our benefits reward your dedication, hard work, and personal growth. What you'll do as an Entry Level Sales Rep: Generate qualified leads of homeowners interested in residential solar energy systems. Schedule prospective customers for a free information session. Serve as a consultant and provide useful product knowledge to qualifying homeowners. Acquire, retain, and constantly develop industry knowledge. Represent Trinity Solar Inc. and its brand with professionalism and integrity. Meet and exceed our lead generation goals. What you'll bring: Be self-driven and highly motivated. Have a proven track record of setting and achieving goals. Have a reliable mode of transportation. Have a cell phone with data and internet. Be 18 years old or older. Bilingual abilities are a plus. Certain opportunities may require a clean DMV record. Our benefits are tailored for your success. Your hard work and dedication to our customers and you never go unnoticed. To reward you, we offer: 4 weeks of paid training Earn $68,000-$120,000 (base salary plus commission) Health, dental and company paid vision. Competitive 401(k) savings plan with company match Life insurance

Join Our Team as a Residential Electrician at Trinity Solar! $5,000 Sign-On Bonus!! Are you ready to power the future? Trinity Solar is on the hunt for a skilled Residential Electrician to join our dynamic team in the Electrical, Service, and Installation Departments. Dive into a rapidly growing industry where your expertise will help families transition to clean, renewable energy. Join us for steady work, a supportive team environment, and the rewarding feeling of contributing to a sustainable future. If you're a licensed electrician ready to make a difference, we want to hear from you! Pay: $25 - $45/hr depending on license/experience Sign-On Bonus: $5,000 Benefits: Health, vision, and dental insurance 401K savings plan with company match Life insurance available, both companies paid and elected Paid Time Off Why Join Us? Be part of a dynamic team committed to excellence and sustainability. Work with cutting-edge technology in a rapidly growing industry. Enjoy a collaborative environment that values your expertise and craftsmanship. What You'll Do: Upgrade & Install: Execute service upgrades, utility meter moves, and install solar-related electrical equipment, wiring, and devices-all while adhering to safety and code standards. Lead the Charge: Provide technical expertise and guidance to installation crews, ensuring top-notch workmanship and safety on every project. Team Player: Assist with staging materials and site prep, maintaining a clean, organized job site. Document Success: Complete project documentation, including photos and equipment diagrams, and submit promptly. Communicate Effectively: Interact professionally with customers, inspectors, and team members to ensure seamless project execution. Follow Safety Protocols: Adhere to company policies regarding vehicle care and safety guidelines. Qualifications We're Looking For: License Required: A valid State Electrical License. Code Knowledge: Strong understanding of the National Electrical Code (NEC) in residential settings. Experience Preferred: Previous residential solar experience is a plus, but we're eager to train motivated licensed electricians! Mechanical Skills: Comfort with tools and physical tasks, including climbing and lifting (40-50 lbs). Clean Record: A clean Motor Vehicle Report (MVR) and ability to pass a pre-employment drug screening.

As a family company, we serve people and communities. When you work at Meijer, you're provided with career and community opportunities centered around leadership, personal growth and development. Consider joining our family - take care of your career and your community! Meijer Rewards Weekly pay Scheduling flexibility Paid parental leave Paid education assistance Team member discount Development programs for advancement and career growth Please review the job profile below and apply today! Provides direction related to operations, processes, and conditions of the store. Plans, directs, and supervises the team in the day-to-day operation of the store. Is responsible for the selection, training and development, and performance management for all team members in span of care. Develops strategies to improve customer service, drives store sales and increases profitability. Ensures customer needs are met, complaints are resolved effectively and efficiently, and service is quick and efficient. Ensures that all products and displays are merchandised effectively to maximize sales and profitability. Forecasts staffing needs and develops recruiting strategy to provide optimal staffing in all areas. Works in a manner that reflects the Meijer brand and values. Purpose: Key responsibilities for this position include: Overall operations responsibility across food and general merchandise areas. Management across the store of planograms, seasonal resets, and endcaps. Engaging team members and leadership to provide the best possible shopping experience for our customers. Creates a culture that drives positive team member engagement to retain talent as well as recruit new talent to meet forecasted staffing needs. Identifying, selecting, and developing talent within the store. Upholding the cultural standards and values via open, clear, and effective communication. Assessing the financial results of the store, implementing, and executing appropriate business strategies to drive store profitability and results. Developing strategies to improve customer service, store sales and profitability. Ensuring customer needs are met, complaints are resolved effectively and efficiently, and service is quick and efficient. Ensuring that all products and displays are merchandised to maximize sales and profitability. Being a strong community partner by cultivating relationships in the local community to support the Meijer brand. What You'll be Doing: Ability to assist the Store Director in running the overall store operations as needed. Leads performance management activities for leaders and team members while making decisions on performance ratings, career development and promotion potential. Attracts, selects, and retains a team that supports the Meijer culture, including valuing Diversity, Equity, and Inclusion. Responsible for daily communication with team, leading huddles to share financial performance, customer feedback, recognition, and other important information. Drives candid and open communication within the store built on Meijer's philosophy of Care and Accountability. Communicates product freshness standards and ensures that processes and procedures are followed. Responsible for all store operations in absence of the Store Director. Verifies that all operations are run in a manner consistent with Meijer's and local authorities' Food Safety standards. Through personal involvement, assist in creating a connection with the communities and customers we serve. Delivers on key performance metrics which includes sales, shrink, labor, margin, total direct contribution, net profit, customer satisfaction, and safety. Driver of new implementations/initiatives identified by store operations. Remains informed and aware of the changing macro environment and customer desires and drives strategies to keep Meijer competitive. Involved in daily DSD execution, backroom and salesfloor excellence. Keeps current on competitive trends and strengths and weaknesses of current competitors. Follows company merchandising planograms and uses 85/15 to design plans including (but not limited to) ordering, weekly ad set/seasonal assortments, displays & pricing. This job profile is not meant to be all inclusive of the responsibilities of this position. You may perform other duties as assigned or required. What You Bring with You (Qualifications): Bachelor's degree or equivalent experience. Minimum 5+ years of retail/grocery/operations management/customer service experience. 4+ years of progressive leadership experience. A passion to lead those in span of care while providing industry leading service. Demonstrates proactive/creative thinking and applies it to the business. A thorough understanding of seasonal and diverse merchandising which leads to meeting the needs of our customers/community and gaining sales and market share. A strong business acumen. An innovative attitude to help Meijer set the industry standard. A commitment to fostering an inclusive environment where all team members and vendors feel valued and supported.

Join Our Team as an Installation Crew Leader at Trinity Solar! $2,500 Sign-On Bonus!! Are you a licensed electrician or progressing towards licensure and ready to lead the charge in the renewable energy revolution? Trinity Solar is on the lookout for a motivated Installation Crew Leader to spearhead the installation of cutting-edge residential solar energy systems. If you're passionate about clean energy and eager to take on a dynamic leadership role, we want to hear from you! Pay: $30 - $35/hr Sign-On Bonus: $2,500 Benefits: Health, vision, and dental insurance 401K savings plan with company match Life insurance available, both companies paid and elected Paid Time Off Why Join Us? Make a Difference: Help homeowners transition to clean, renewable energy while contributing to a sustainable future. Career Growth: This is your chance to elevate your career in a booming industry, expanding your leadership skills and expertise. Collaborative Environment: Work alongside a dedicated team that values innovation, safety, and quality. What You'll Do: Lead the Way: Oversee and actively participate in the installation of solar modules, wiring, and electrical equipment, ensuring compliance with NEC requirements and company standards. Mentor Your Team: Provide daily guidance and technical expertise to your crew, fostering a culture of safety and high performance. Technical Problem-Solver: Tackle on-site challenges and ensure smooth project execution, all while supporting our customers. Document with Precision: Maintain thorough installation records, including site details and equipment configurations, to ensure transparency and quality. Communicate Effectively: Engage with customers, inspectors, and internal teams, keeping everyone informed throughout the project lifecycle. Safety First: Keep a safe and organized job site and ensure company vehicles and equipment are operated responsibly. Qualifications We're Looking For: Education: High school diploma or GED required. Licensure: Current Electrician License or documented progress toward licensure preferred. Experience: 1-2 years in solar installation, electrical work, or construction fields. Skills: Strong mechanical aptitude, ability to work at heights, and comfort with tools. Physical Stamina: Ability to lift 40-50 lbs regularly and perform physically demanding tasks in various outdoor conditions. Leadership: Proven ability to motivate teams and promote a positive work environment. Attention to Detail: Excellent time management and problem-solving skills. Reliability: Clean Motor Vehicle Report (MVR) and commitment to safety and quality workmanship.

As a family company, we serve people and communities. When you work at Meijer, you're provided with career and community opportunities centered around leadership, personal growth and development. Consider joining our family - take care of your career and your community! Meijer Rewards Weekly pay Scheduling flexibility Paid parental leave Paid education assistance Team member discount Development programs for advancement and career growth Please review the job profile below and apply today! The Area Leader is responsible for overall team member engagement for those in span of care. The leader will be responsible for driving recognition, feedback and coaching, performance management, training and development, and succession planning. The Area Leader will direct Leads and Team Leaders, while ultimately being accountable for area operations and financials (shrink, productivity, safety, scheduling & forecasting staffing needs, and team member and customer conflict resolution). The Area Leader will work to identify and implement process improvements as well as serve as a steward of the Meijer culture. What You'll be Doing: Engages with team members in span of care to ensure they are receiving appropriate onboarding, training and development, and coaching and feedback to be successful in all they do. Identifies talent and engages in career discussions to support overall store staffing and ensure a diversified talent pipeline strategy for team member as well as leadership roles. Involvement in candid discussions with team members to ensure Meijer standards are upheld and team members have the ability to grow within the organization. Accountability for area operations and financial results by overseeing the execution of corporate plans to ensure all services and products are effectively managed in order to maximize sales and productivity ultimately owning budget line items in the P&L. Drives safety and compliance throughout the store in addition to overall condition management as well as responsibility for following all compliance procedures in the store. Ensures the Team Leaders and Leads are providing guidance and assigning daily work assignments for team members as well as any training needs. This job profile is not meant to be all inclusive of the responsibilities of this position; may perform other duties as assigned or required. What You Bring with You (Qualifications): Bachelor's degree or equivalent experience. Minimum 4+ years of retail/grocery or customer service experience. Progressive leadership experience preferred. A passion to provide industry leading service. Demonstrated ability to communicate with team members in a way that provides clear and precise direction. Demonstrated ability to analyze financial and statistical information and use that information to make informed decisions. Demonstrated ability to lead an organization that practices working safely at all times. Demonstrates proactive/creative thinking and applies it to the business. A thorough understanding of seasonal and diverse merchandising which leads to meeting the needs of our customers/community and gaining sales and market share. A strong business acumen. An innovative attitude to help Meijer set the industry standard. A commitment to fostering an inclusive environment where all team members and vendors feel valued and supported.

Holtec International is a U.S.-based diversified energy technology company with its corporate technology center located in Marlton, New Jersey in the South Jersey region of the Philadelphia metropolitan area. The company's corporate headquarters are located in Jupiter, Florida. The company also maintains several operations centers around the world, including major bases of operation in Pittsburgh (Pennsylvania), Lakeland (Florida), Orrville (Ohio), Kiev (Ukraine), Gloucester (England) and Pune (India). Job Summary The primary purpose of the CAD/CAM Programmer position is to review drawings and create the CAM programs using AutoCAD, Solidworks, and Mastercam. In addition, the CAD/CAM Programmer verifies machining programs match drawing interpretation and symbols, and supports Project Management by monitoring machining outcomes in the shop. Essential Job Functions Review Drawings / Assembly Drawings. Review drawings for components and sub-assemblies from Project Management and identify the number of pieces to be drawn. Identify weld symbols, surface symbols, and quantities of components in order to create Programs. Select the correct post-processor program to code which machine will be used. Create CNC machine program in Mastercam. Select correct drawing file from drawing library for component to be programmed. Select tools, drills, endmill, reamers, and facemills that will shape the component. Create the tool path to program machine movement. Program machine speeds and feeds. Return the machining report to Programming Supervisor to be written for CNC machines. Monitor machining outcomes on the floor. Re-issuing programs if necessary. Reports to Service Center Manager, Manager Shared Services Division. Supports Project Managers, Corporate Procurement (Purchasing). Occasionally interfaces with Production Supervisors. Requirements A minimum of an Associate's degree (Engineering or Drafting) or a minimum of 5 years' experience with Mastercam is required. A minimum of 5 years' experience in print reading and drawing interpretation required to perform the duties. Knowledge of machining practices (CNC machines, CNC programming). Preferred Qualifications Advanced knowledge and certification in Solidworks (2014) or most recent version. Experience in a welding or heavy machining environment preferred. Create Burn Table program in SigmaNEST. Create individual components drawings in AutoCAD and Solidworks (CAD). Advanced knowledge AutoCAD Mechanical (2011) including flat developments, intersections, and 3D drafting techniques. Intermediate knowledge of Solidworks (2014).

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world's largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco's value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations' spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom's vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview We are seeking an Intellectual Property Attorney to join our Intellectual Property Law Department (IPLD) within Aramco's Law Organization. IPLD are responsible for Company-wide legal support for all IP-related matters, including patents, trademarks, copyrights, IP-related agreements, as well as IP education and counseling. Your primary role will be to perform or direct the performance of legal activities within the department and assist the General Counsel, Associate General Counsel and General Attorneys in providing world class legal services to Aramco and its partners and affiliates. You will work closely with internal clients and inventors in support of the company's various technologies and scientific disciplines. Key Responsibilities As the successful candidate you will be responsible to perform the following: Manage outside counsel in the preparation and prosecution of patent applications. Patent portfolio management. Counsel clients. Provide IP education to clients on various IP-related topics. Provide legal advice in the areas of patent portfolio strategies. Draft and negotiate research and development agreements and IP licenses. Minimum Requirements As a successful candidate you will have: A Juris Doctorate degree or equivalent. Current admission to general practice before the highest court of the state or country of which you are a citizen or resident. A minimum of 10 years experience working for a law firm or major corporation, of which a minimum of 5 years must be as in-house counsel. Demonstrable experience of preparing and prosecuting patent applications. Able to demonstrate familiarity with the Patent Cooperation Treaty and other foreign prosecution authorities. Experience with other areas of intellectual property, including trademarks, copyrights and trade secrets. Experience drafting and negotiating IP agreements, including research collaboration and IP license agreements. Oil and/or chemical industry experience is a plus. Work Location and Work Schedule Work Location: Within Saudi Arabia - To be specified in Job offer Work Schedule: Full Time - To be specified in Job offer Job Post Duration Job posting start date: 12/09/2025 Job posting end date: 12/31/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world's biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs - one of the largest in the world.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world's largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco's value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations' spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom's vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview We are seeking a Financial Auditor to join Internal Auditing Organization. The Internal Auditing is responsible for helping organizations to accomplish their objectives by bringing a systematic and disciplined approach to evaluate and improve the effectiveness of the organization's risk management, control, and governance processes. Your primary role will be to lead and oversee the audit team while serving as the primary liaison for clients, ensuring strong relationships and high-quality delivery throughout the engagement. Key Responsibilities As the successful candidate you will be required to perform the following: Review and analyze financial statements in order to identify areas which should be assessed as a part of an audit. Design, execute, document and report on audit testing of financial and reporting processes, balances, amounts and disclosures. Identify key business, financial and functional processes for identifying and assessing current and emerging risks. Plan, execute, and/or report internal audits to management. Establish the objective and scope of the audit engagement. Develop comprehensive risk-based audit programs. Responsible for the audit team and will be overseeing assistant auditors. Discuss concerns and issues with the audit client, draft field memorandums, and update client and Internal Auditing Management on progress of the audit. Prepare or assist in preparing audit reports. Deliver presentations to client's management at the audit opening and closing meetings. Provide on-the-job training and mentoring to inexperienced or less experienced staff. Evaluate the performance and capabilities of the assisting staff auditors. Minimum Requirements As a successful candidate, you will hold a bachelor's degree in accounting or finance or another related field. An advanced degree is a plus. You will have a minimum of 6 years of experience working either in external auditing and public accounting firms in the auditing/assurance practice or the financial reporting function of a publicly listed company, working with the adoption, application and presentation of International Financial Reporting Standards. You should hold a Certified Public Accountant or Chartered Accountant designation. Additional certifications such as Certified Internal Auditor is a plus. You must demonstrate excellent oral and written communication skills in the English language and excellent presentation and interpersonal skills. You should be flexible to travel within the Kingdom of Saudi Arabia and/or outside the Kingdom to conduct audit and consulting engagements. Work Location and Work Schedule Work location: Within Saudi Arabia - To be specified in Job offer Work schedule: Full Time - To be specified in Job offer Job Posting Duration Job posting start date: 12/15/2025 Job posting end date: 12/31/2026 Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world's biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs - one of the largest in the world.

Quality Control / Level II NDE (VT) Place of Work: Orrvilon Manufacturing Division in Orrville, OH Holtec International seeks qualified applicants for its Quality Control / Level II NDE (VT) and dimensional position in the Quality department based at Orrvilon Manufacturing Division in Orrville, OH. Specific Areas of Responsibility: Perform NDE on ASME Section III, Section VIII Vessels and nuclear power plant components. Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results. Perform NDE Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication. Familiar with the tools and equipment and shall have demonstrated proficiency in their use. Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved. Capable of assisting production in the set-up of material and/or components for receipt inspection, as required. Minimum Technical Requirements: Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart. Inspection personnel performing work on elevated surfaces shall be capable of wearing the required fall protection equipment. Inspection personnel shall be physically capable of crawling in and out of small manways, climb inside vessels, towers, heaters, or other confined spaces for inspection activities, often wearing Self Contained Breathing Apparatus (SCBA) as required to comply with safety regulations. Any fear of closeness (claustrophobia) should be identified. Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds Will work in various areas of the plant location. Dependent upon the area, environmental conditions can be hot, cold, dirty, greasy, wet and noisy. May work alone with minimal supervision or with other personnel. Inspection personnel shall possess fundamental written and verbal communication skills. Inspection personnel shall be fluent (written and verbal) in the English language. Computer skills to include MS Office applications. Desirable Qualifications: High School diploma or equivalent with at least three years of inspection related experience. Two years of inspection related experience with a completion of 2 years of college in technical or engineering related discipline from a university, college, or technical school. One year of inspection related experience with a degree in engineering or science from a university or accredited college. Qualified and certified to ASNT-TC-1A in two or more of the following NDT Methods that will be utilized: Visual Examination (VT). Certified Level II Visual Examination (VT). Experience in working with the following codes/standards: ASME, AWS, ISO and other standards are desired. Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references.

Founded in 1993 in Illinois, Benchmark Products provides innovative solutions and products to support life science manufacturers in delivering high-quality therapies to patients. The company is ISO 9001:2015 certified and offers state-of-the-art ISO Class 7 Cleanroom facilities. With a commitment to exceptional quality, Benchmark Products serves over 500 life science customers, providing value-added services such as custom kitting, single-use fluid handling assemblies, product irradiation, and sterile product quality assurance. Role Description This is a full-time, on-site role (4 days) for a Business Development Representative based in Lincolnshire, IL. The representative will be responsible for generating leads, identifying business opportunities, building relationships with prospects, and contributing to sales goals. Day-to-day tasks include conducting market research, initiating outreach to prospective clients, managing customer relationships, and supporting sales and strategic business development initiatives. The role requires proactive communication and collaboration with internal teams to align on goals and strategies. This role is compensated with base salary and commission, with on-target earnings of $100k. Essential Duties & Responsibilities: Prospecting and Lead Generation: Identify potential customers through research, cold calling, networking, and referrals. Utilize various tools and platforms to find leads, initiate contact, build interest and schedule meetings. Client Engagement: Engage with prospects to understand their needs, educate them about the company's products or services, and present solutions that align with their requirements. Sales Reporting and Analysis: Keep accurate records of sales activities, including calls, emails, and meetings, using CRM (Customer Relationship Management) software. Analyze sales data to identify trends, assess performance, and make strategic recommendations for improvement. Collaboration: Collaborate with other members of the sales team, as well as marketing, customer service, and product development departments, to optimize sales strategies, share insights, and contribute to the overall growth and success of the business. Continuous Learning: Stay informed about industry trends, market developments, and competitor activities to maintain a competitive edge and enhance sales effectiveness. Continuously improve selling techniques and product knowledge through training and professional development opportunities. Requirements: Bachelor's Degree 6+ months of experience working as an inside sales, sales/business development role or account management capacity. Ability to effectively understand customer needs while identifying and capitalizing on sales opportunities. Ability to communicate professionally with internal and external customers. Must have a customer-centric approach, be persistent, and have a results-driven mindset. Proficiency in CRM systems. Salesforce is a plus. In-office 4 days per week

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world's largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco's value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations' spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom's vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview Experienced Nonmetallic engineering specialist must have advanced knowledge and strong technical background in polymer and composite and their applications in Oil and Gas (O&G) and Building and Construction (B&C) sectors. Candidates must have good communication skills and be comfortable working both independently and with cross-departmental teams. Candidate will be responsible to support nonmetallic deployment, strategy implementation, design review, maintain and develop the company's NM standards; provide technical support to the company's operations, new projects development and evaluation. Key Responsibilities Provide consultation, review capital projects and introduce qualified nonmetallic products in the engineering design packages. Support research and pilot projects that will enhance unit performance. Develop new specifications and update existing standards, procedures and best practices. Perform technical assessment of new vendor facility, their qualification and approval and conduct periodic assessment to maintain regulated vendor list. Develop, introduce and/or implement viable new nonmetallic technologies (eg. oil and gas, building and construction) in Saudi Aramco facilities. Lead or participate in specialized tasks, such as incident investigation (e.g. failure analysis) teams, special audit teams, value engineering teams, organizational improvement teams, etc. Provide support in design and construction of the nonmetallic (e.g. pipe, composite repair, structural component, lining) product system. Act as a professional mentor to developing specialists and engineers. Demonstrate excellent technical writing and presentation skills. Minimum Requirements Bachelor's Degree (Advanced Degree preferred) in Chemical, Materials, Polymers, or Mechanical Engineering with 20 years of professional experience as an engineer in the field of nonmetallic materials, specifically in oil and gas industry. Excellent knowledge in nonmetallic (eg. thermoplastic, thermosets) products (e.g. piping, tanks, valves, downhole tubulars, composite structures) qualification and testing, consultation, operation, technical support and technology management. Affiliation with professional societies is highly desirable such as ASME, API, ISO, NACE with In-depth knowledge in International Engineering Standards and Specifications. Work Location and Work Schedule Work Location: Within Saudi Arabia - To be specified in Job offer Work Schedule: Full Time - To be specified in Job offer Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world's biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs - one of the largest in the world.

The EHS Specialist will support the Gurnee site in a wide range of activities related to Environment, Health, and Safety. This role plays a key part in ensuring compliance with all regulatory requirements (OSHA, EPA, wastewater and hazardous waste management), while fostering a proactive safety culture and driving continuous improvement in operational practices. Key Objectives Ensure compliance with all applicable federal, state, and local EHS regulations. Promote a culture of safety, transparency, and operational discipline across the site. Identify and implement risk-reduction opportunities through inspections, audits, and employee engagement. Lead the Site Safety Committee, ensuring regular meetings and cross-functional participation. Support and coordinate training, communication, and awareness programs to strengthen EHS excellence. Responsibilities Implement and maintain site-specific EHS policies, programs, and procedures aligned with company and regulatory standards. Conduct incident investigations and root cause analyses, ensuring corrective actions are completed and verified for effectiveness. Prepare and maintain regulatory reports, permits, and documentation, collaborating with Site Leadership, Corporate EHS, and Legal as needed. Maintain accurate and accessible compliance records while protecting confidentiality where required. Maintain an active presence in production and warehouse areas to proactively identify risks and engage employees. Promote a culture of reporting for incidents, near misses, and continuous improvement initiatives. Ensure contractors are properly trained and compliant with all company and governmental safety requirements. Inspect and maintain all safety and emergency response equipment to ensure readiness. Collaborate with cross-functional teams to align on EHS goals and share best practices across the organization. Qualifications Bachelor's degree in Environmental Science, Industrial Hygiene, Engineering, or a related field preferred. Knowledge of OSHA, EPA, and hazardous waste management regulations. Strong communication, leadership, and interpersonal skills with the ability to collaborate across all levels. Detail-oriented, proactive, and able to exercise sound professional judgment. Proficient in Microsoft Office (Word, Excel, Outlook, PowerPoint). Demonstrated integrity and commitment to continuous improvement and risk reduction.

Move Coordinator - Houston, TX We are seeking a proactive and highly organised Move Coordinator to join our client's dynamic team, specialising in residential, commercial, and corporate relocations. Based in the Houston office, this exciting opportunity involves managing a diverse portfolio of moves, including national account household goods (HHG), office and industrial (O&I) sales, COD, and OA/DA shipments. Acting as the central liaison throughout the move process, you'll play a crucial role in delivering top-tier service across the relocation and moving industry. What You'll Be Doing: Serve as the primary point of contact for clients throughout the entire move lifecycle. Coordinate a mixture of national account HHG moves, O&I sales, COD, and OA/DA relocations. Liaise with internal departments, suppliers, and third-party agents to ensure seamless execution. Manage all stages of the move process, from pre-move surveys and packing to final delivery and post-move support. Prepare customised move plans and documentation aligned with specific client needs. Provide clients with consistent updates, instructions, and guidance throughout their relocation. Monitor move progress and proactively address any delays or challenges. Maintain detailed and accurate records in CRM systems, including communication logs and cost tracking. Oversee claims, feedback, and service recovery professionally and efficiently. Collaborate closely with sales and operational teams to ensure quality standards are met. Support continuous improvement initiatives and help develop internal best practices. Operate in a fast-paced, office-based environment with a focus on high-volume coordination. What We're Looking For: Previous experience in move coordination within the moving or relocation industry is essential. Strong knowledge of HHG, O&I, COD, and OA/DA move processes. Excellent communication and interpersonal skills with a customer-focused mindset. Highly organised with the ability to manage multiple moves and deadlines concurrently. Proven track record of handling pressure in a time-sensitive, client-facing role. Proficiency in CRM systems and Microsoft Office applications. Interested? Reach out to Alchemy Global Talent Solutions today.

Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world's largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco's value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations' spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom's vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview We are seeking a Business Origination Specialist to join Origination & Portfolio Optimization Department. The Origination and Portfolio Optimization Department, part of Aramco's New Business Development (NBD) organization plays a strategic role in shaping the company's long-term strategy. It leads efforts in identifying and advancing opportunities that align with Aramco's strategic direction. Key responsibilities: include sourcing and evaluating new business opportunities including joint ventures, and mergers & acquisitions (M&A)-both buy-side and sell-side. As a Business Origination Specialist, you will be responsible for bringing insights into various markets, not limited to any sector, to uncover business opportunities that would lead primarily to transactions such as: acquisitions, divestments, and joint ventures with a global reach. Key Responsibilities You will be required to perform the following: Generate new business ideas and assess their feasibility. Articulate rationale for pursuing the identified opportunities incorporating factors such as: alignment with business strategy, market trends, business & commercial impact and mitigation of risk. Engage with internal and external entities to be knowledgeable of current or emerging business trends. Lead and conduct desktop market research. Develop business plans & financial models and review financial models prepared by others. Produce thought leadership reports describing the strategies, financial and operating performance of companies, industries, and sectors. Manage cross-functional teams to develop business plans for new business opportunities. Continuously review and enhance business origination process with best practices. Mentor and coach junior staff members regarding skill development and the business origination process. Track record of originating transactions that resulting in successful deals. Minimum Requirements As a successful candidate you hold a: Bachelor degree in Engineering, Business Administration, Finance, Economics, Accounting, Banking or related discipline from an accredited university. Advanced degree is a plus. Professional certifications such as: Chartered Financial Analyst (CFA), Certified Management Accountant (CMA), or Project Management Professional (PMP) certification is a plus. Minimum of 10 years of experience including, but not limited to, oil and gas and the broader energy industry, technology, professional services, real estate and infrastructure. If an MBA or a professional certification is not available, 15-years relevant experience is required. Industry expertise or knowledge of conducting commercial & economic feasibility studies is required. Knowledge of venturing activities like commercialization, spin-offs or joint venturing, project development. Strong financial background including: experience of financial valuations and modeling. Experience with developing deal strategy and market positioning. Strong analytical ability to synthesize data obtained from various sources into meaningful insight. Experience with market intelligence platforms, analytics and reports. Posting Duration Posting Start Date: 12/18/2025 Posting End Date: 12/31/2026 Work Location and Work Schedule Work Location: Within Saudi Arabia - To be specified in Job offer Work Schedule: Full Time - To be specified in Job offer Working environment Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world's biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs - one of the largest in the world.

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work. Prepare materials for welding, fit the components, and perform welding process per drawing specification. Weld components in all positions consistent with quality requirements. Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols. Monitor the fitting, burning, and welding process to avoid overheating of parts. Use tools of measurement for checking dimensions of parts, work to tolerances. Visually examine welds for quality. Operate hand and power tools common to the welding trade. Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment. Maintain work area in safe, clean, and orderly condition. Operate various types of automatic, semi-automatic or manual welding equipment to join metal segments using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and submerged arc welding. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas. This role can be physically demanding and may require the ability to lift up to fifty (50) pounds. Minimum and Preferred Qualifications: High school degree or equivalent required. Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.) Ability to read blueprints and transfer blueprint information to material. Minimum of 2-4 years welding in heavy plate manufacturing required. **MUST pass 2G and 3G FCAW weld tests

At UGI Utilities, Inc. we believe in providing a superior range of energy products and services to our customers in a safe, affordable manner. As our energy needs evolve, UGI will be there providing safe and reliable service that brings warmth and comfort to our 750,000 customers in 45 counties in Pennsylvania and 1 county in Maryland. We strive to reflect the communities we serve by attracting and retaining top talent, while maintaining a diverse workforce that embraces our culture of safety, service, and integrity. As an employee of UGI Utilities, you can expect a competitive total compensation plan and comprehensive benefits. Employees work in a collaborative environment, have upward mobility opportunities, and the ability to enjoy a true work life balance. To learn more about UGI's workplace culture, sustainability efforts, and commitment to inclusivity, we invite you to visit our UGI Corporate sustainability page . Apply to UGI Utilities today to share in our mission and support countless neighbors, friends, and families in providing best-in-class products and services! Job Summary Responsible for translating the business requirements for Operational Solutions into the SAP system via the SAP Configuration IMG (SAP Implementation Guide). This includes all aspects of project work, on-going functional enhancements, troubleshooting, and SAP-provided system and/or legal changes. Collaborates on all phases of the systems development life cycle (SDLC) with a focus on the analysis, design, and development of configuration-based solutions. Must continuously maintain and develop the necessary skillsets, both technical and analytical, to enhance value-added business solutions. Essential Functions Support the request and analysis phases of SDLC by assisting with documentation and estimates. Execute the design, development, testing, and implementation phases of SDLC by producing the prescribed deliverables. Review deliverables produced by junior staff. Work with business unit analysts and other IT technical resources to develop new systems and enhance existing systems to meet changing business, policy, and legislative requirements. Perform configuration to support defined business processes/functions. Complete timely testing and validation of changes. Develop strong business and system knowledge relating to the functional areas and assigned business unit(s). Support the maintenance and evolution of the logical data model and business process model for assigned business unit(s). Provide input and direction on business unit technology strategies. Troubleshoot incidents reported against IT applications. Assist in investigating issues to determine the root cause of problems. Support and monitor daily batch processing, responding to job failures in a timely manner. Provide 24x7 primary and/or secondary support to core applications considered business critical. Responsible for generating documentation throughout all phases of a project. This may include items such as project charters, technical specifications, and technical test plans. Document configuration processes and procedures for all relevant SAP systems. Use flow charts, screen shots, and step-by-step instructions to document procedures. Coordinate and provide thorough and consistent end-user training on all SAP systems. Follow established change management procedures to ensure that applications and modifications are implemented in a way that meets internal IT controls. Manage applicable vendor relationships to ensure on-going product support appropriate to the needs of the Company. Stay apprised of current trends in the business marketplace with a focus on product and service development, delivery and support, and applying key technologies. Provide input and direction on business unit technology strategies. Perform other dutes as assigned. Knowledge, Skills, and Abilities Possess strong analytical skills, which allows for the assessment of business processes and how they guide and shape application functionality. Comprehend technical design specifications and possess knowledge of development tools and technologies in support of the Information Technology architecture. Stay current with IT industry trends and emerging technologies; suggest and lead application of new technologies. Understand project plans and can clearly articulate their role, project goals, and timelines. Develop project plans for small projects. Partner with Project Managers to develop project plans for large projects and assist with resource management. Working knowledge of COBIT5-based IT Governance and Management framework or other structured industry standard methodologies. Strong verbal, written and interpersonal skills. Frequently present information to their team, department, and business areas. Experience and Education Bachelor's degree in Computer Science, Information Systems, or equivalent discipline. At least four years of SAP configuration experience performing system analysis, design, development, and production support duties. Two or more years should be in SAP FSM. Experience in SAP S/4HANA and/or SAP WM is desired. ITIL (IT Infrastructure Library) Foundation certification (at hire or within 12 months in position). Preferred: SAP professional certification in one of the specific disiplines lists above. 2+ years supporting a system with an RDBMS. Experience in systems analysis, design, and development. Experience developing technical specifications based on the requirements provided from business units. #LI-Onsite UGI Utilities, Inc is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with UGI policies. As a federal contractor that engages in safety-sensitive work, UGI cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

5 Star Electric, LLC (5 Star) is a premier full-service provider of electrical construction, maintenance, and repair services with offices in Western Kentucky and Dallas/Fort Worth, Texas. 5 Star specializes in Distribution and Transmission Power Line work, Substation, Industrial, Commercial, Streetlighting, and Fiber installations. Position Title: Overhead Distribution Lineman - A Class Our Core Values: Guided by Safety. Focused on Communities. Powered by Care. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The Overhead Distribution Lineman - A Class is responsible for all Apprentice and Class B & C responsibilities in addition to working energized and de-energized lines and equipment. Roles and Responsibilities: Thorough knowledge of methods, practices and equipment of electrical line work. Thorough knowledge of the hazards of electrical work and necessary safety precautions. Ability to climb poles and perform strenuous duties in a variety of weather conditions Ability to follow oral and written instructions and communicate effectively verbally and in writing. Ability to work with angry or difficult customers. Skill in operating listed tools and equipment. Ability to accurately read and record data from various types of meter dials. Ability to work in inclement weather. Ability to operate service truck. Digs holes and sets poles for electrical lines. String wire on new construction or in repairing line breaks. Sets and connects transformers and other electrical distribution equipment. Climbs pole's and makes necessary repairs. Trim trees along electrical lines and perform related work as required. Performs related work as required. Responds to work orders for utility disconnections, reconnections, new orders, and other public works service. Maintains are assigned tools and equipment. You must stand on-call after working hours as needed and directed. Class A Lineman is responsible for ensuring safety standards for himself and his crew and is responsible for his/her own safety at all times. Safety should be the number one priority of any apprentice lineman. It is the apprentice lineman's responsibility to report and all accidents/incidents to the foreman immediately and to make the foreman aware of any known potential safety hazards that may exist. Other duties as assigned. Success Factors: Must possess math skills along with basic knowledge of PMP and Electrical Theory. Must be able to work outdoors in diverse terrain and in all weather conditions. Physical capabilities required to safely operate a motor vehicle, in all driving conditions Possesses sight, strength and coordination necessary to safely and effectively operate heavy and light equipment and tools. Lifts up to 50 pounds. Climbs poles and works at heights. Duties entail full-body exertion, strenuous lifting, carrying, pushing and pulling. required to stand, walk; and use hands to finger, handle, feel or operate objects, tools, or controls. Specific vision abilities required by this job include close vision, distance vision and the ability to adjust focus. Experience and Education: Four (4) years of experience or equivalent hours. Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver License is required Must have a Valid Class A CDL and current medical examiner card Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Must be able to work outdoors in diverse terrain and in all weather conditions. Must complete OSHA 10hr Safety Training Program within 60 days. Completion of formal training program or at least four years of verifiable experience including three years of energized work Successful test completions on rigging, grounding, transformers, hot sticks, weights, and torques. Successful completion of appropriate knowledge and skills examinations. Compliance with Safety Performance Standards May be Employee Performance Tested to a higher level with testing and verifiable experience Possesses sight, strength and coordination necessary to safely and effectively operate heavy and light equipment and tools. . Completion of Insulate/Isolate Course Critical review and recommendations from Operations, Safety/Training Must have ability for frequent travel on needed training requirements and potential for overtime including storm work. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

As an EQT Intern, you will participate in a 14-week paid "real-world experience" internship program. Not only will you be involved in learning activities unique to your role, but you will learn and grow with #Qrew. If innovation and powering the future sounds exciting to you, we encourage you to apply! Here is how the Midstream Asset Development Electrical Engineer Intern role will impact our business: The Electrical Engineer Intern is a summer position designed to provide students with hands-on experience in midstream electrical design, construction, and operations. Working within EQT's Midstream Engineering Services team, the intern will assist in the design and development of electrical systems that support compressor stations, interconnects, dehydration facilities, master meter sites, and related midstream infrastructure. This role offers an excellent opportunity to apply classroom knowledge to real-world energy projects, collaborate with experienced engineers and project managers, and gain a comprehensive understanding of the design and execution of electrical systems critical to natural gas transportation and processing. The Midstream Asset Development Electrical Engineer Intern responsibilities include but are not limited to: * Assist electrical engineering and project management teams in the design, specification, and review of electrical systems for midstream facilities. * Support the preparation and revision of one-line diagrams, load calculations, grounding plans, cable schedules, and equipment layouts. * Collaborate on control system integration and interface design for equipment such as motors, switchgear, and transformers. * Participate in drawing reviews and technical evaluations of vendor equipment packages. * Conduct field visits to compressor stations or other midstream sites to observe installation practices and verify as-built conditions. * Help maintain and organize electrical design files, equipment data sheets, and project documentation. * Research and prepare technical reports or presentations supporting electrical reliability, efficiency, or safety initiatives. * Learn and apply EQT's safety, compliance, and operational standards, including NEC, API, and other relevant industry codes. * Collaborate across mechanical, civil, automation, and operations teams to understand how electrical systems integrate within facility and pipeline operations. Required and Preferred Experience and Skills: * Currently pursuing a Bachelor's degree in Electrical Engineering or a closely related discipline. * Demonstrated interest in energy infrastructure, power systems, or industrial electrical design. * Familiarity with electrical schematics, motor control, and power distribution concepts preferred. * Strong technical, organizational, and analytical skills. * Proficiency in Microsoft Office (Word, Excel, PowerPoint); experience with AutoCAD, or similar tools is a plus. * Excellent communication skills and ability to work both independently and collaboratively. * Willingness to work in office and field environments as needed. * Valid driver's license and ability to travel locally to project sites. Program Details: * Duration: Summer Internship (typically May-August) * Location: Pittsburgh, PA area, with potential field assignments across EQT's midstream operating footprint * Schedule: Full-time (40 hours/week); 9/80 schedule where applicable