Equipment & Controls, Inc. jobs - 3,276 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC is an industry leading, dynamic company that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC provides compensation, incentives and benefits that allow our employees to build careers - not just work a job. “2022 & 2023 Top Companies for Women to Work For in Transportation” Awarded by the official magazine of the Women In Trucking Association. Job Description Marathon Petroleum Company LP (MPC) has a position available for a professional, local (home daily), transport driver. Our drivers are responsible for the safe and efficient delivery of petroleum products from various loading locations to various delivery points and customers. Transport drivers independently follow policies, procedures, and standards. Marathon transportation has one common vision: no accidents, no injuries, while being good stewards of the environment. Inclusive Benefits. Local Routes. Safety First. Outstanding Training. Click Here for more reasons why MPC is the last stop for many drivers. Benefits Total compensation up to $130,000 Hourly Rates: $33.05-$34.79 Insurance: Health/Dental/Vision coverage available day 1 Retirement: 401k with company match up to 7% Pension: Company funded pension plan up to 11% Annual bonus: Eligible for company sponsored annual bonus. Paid parental leave. Education reimbursement For full benefit details visit ********************* Minimum Qualifications Active Class A Commercial Driver's License Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must register with FMCSA Drug & Alcohol Clearinghouse and provide consent to company for review of clearinghouse records. Must be able to drive interstate. Active CDL Endorsements: Hazardous Materials and Tank Vehicle (Required) License - Restrictions: Must be able to operate a manual transmission (13 speed) Shift Requirements Must be able to work up to a 12-hour AM/PM shift. Must be able to work hours beyond schedule Job Responsibilities Perform pre-trip inspection on equipment in alignment with MPC policy and Department of Transportation (DOT) regulations. Check tank truck/trailer or tractor/trailer for general operating requirements and make sure that all required equipment is available and in good operating condition. Note inspection and deficiencies on the pre-trip inspection form. Drive a tank truck/trailer or tractor/trailer to transport product in a safe, efficient, and professional manner. Obey all applicable federal, state and local laws. Follow MPC and site specific standard operating procedures for the loading and offloading process. Perform post-trip inspection on equipment in alignment with MPC policy and DOT regulations. Complete all regulatory and customary paperwork. Ensure equipment is ready for the next shift. Communicate all incidents, including safety and environmental concerns, according to company procedures. Report all equipment issues in a timely manner. Follow, maintain, and adhere to all safety rules and operating procedures, including all DOT regulations. Physical Requirements Must be able to work outside in all types of weather conditions. Must be able to work on elevated spaces: 30+ feet on graded elevation. Must be able to frequently lift, carry, push, and/or pull 50-65 lbs. Must be able to sit for extended periods of time. Must be able to grip a steering wheel for extended periods of time. Screening Requirements Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must pass required drug and alcohol screening(s). Must complete DOT physical and maintain current medical card. Must pass three-year DOT safety background check and seven-year criminal background check. Must pass pre-trip exam and road test to demonstrate proficiency operating required equipment. #TR Are You Ready to Roll? Apply here now or visit **************************** for more information. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Cadiz, Ohio Additional locations: Job Requisition ID: 00019814 Location Address: 43073 Industrial Park Rd Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC has an opportunity for a Lead IT Auditor! This role is located at our Findlay, OH or San Antonio, TX office and supports the Audit Assurance and Advisory Services Organization. As a Lead IT Auditor, you will play a crucial role in ensuring the integrity and security of our organization's information systems. Your expertise in auditing and evaluating IT processes will be instrumental in identifying potential risks and implementing effective controls. By leveraging Agile methodologies, you will enhance the flexibility and responsiveness of our audit processes, allowing for continuous improvement and timely risk mitigation. You will collaborate closely with various departments, including IT, Refining, Mid-stream, Finance and Compliance, to ensure that our systems adhere to regulatory requirements and industry best practices. Your analytical skills and attention to detail will help safeguard our data and enhance operational efficiency, making you an invaluable asset to our team. As a leading Fortune 500 company, we foster a robust and supportive culture that emphasizes continuous learning and development. Our employees have the opportunity to gain diverse experiences across various sectors of the organization. Furthermore, we offer a competitive salary structure, including a 401K match and a cash balance pension plan. KEY RESPONSIBILITIES: Participate as a Staff or Lead Auditor, perform information technology (IT) audits on MPC's and MPLX's business activities in accordance with International Standards for the Professional Practice of Internal Auditing and enterprise methodology to identify technology risks, evaluate the efficiency and effectiveness of areas such as infrastructure, enterprise business applications, cybersecurity, 3rd party IT support and internal controls that may have an impact on the integrity of the control environment, integrity of company and/or financial information/data, or achievement of business objectives. Performs risk-based integrated audit procedures on scheduled audit projects in accordance with approved risk-based audit programs in timely, efficient, professional manner, and develops audit plans that effectively and efficiently incorporate all sub-process within the entire project cycle. As a lead on an audit engagement or project, manages work products and deliverables of staff auditors. Provide advisory review recommendations to management on the sufficiency of internal control design for new computer applications, systems, and infrastructure changes prior to implementation. Provide recommendations to IT management on the sufficiency of new policies, procedures and guidelines prior to publication. Maintain solid relationships with IT organization at multiple levels to help keep Audit team aligned with the IT strategy and associated risks. Identify value-added projects for partnering between Audit and IT. Advocate for 3A within the broader organization and be considered a controls expert. Coach/guide audit staff on audit processes and procedures, providing technical expertise and fostering their professional growth. Shares knowledge, trends, and best practices with team members to increase efficiency and effectiveness in the completion of audits and to enhance the company's risk assessment. May develop and deliver presentations to staff, management and/or the business. Leads special reviews/projects as requested, including system conversion systems migrations, reengineering initiatives, etc. Lead department initiatives Assist in the preparation of formal reports and presentations of audit results for Audit Committee, and / or senior & executive management. MINIMUM QUALIFICATIONS: Bachelor's Degree in Business, Computer Science, MIS, or other related fields. Master's degree, preferred. At least one of the following Professional Certifications are required or must be obtained within 2 years of position acceptance: Certified Internal Auditor (CIA), Certified Information Systems Auditor (CISA), Certified Information Systems Security Professional (CISSP), Certified Public Accountant (CPA), Cybersecurity, or other related industry certifications. Ten (10) - Fifteen (15) years of information systems, audit, or business experience is required, with a strong background in IT technologies and applications and progressive work experience and responsibilities is required. Familiarity with AGILE concepts preferred. Continuous Improvement Mindset. Prefer strong background in Operational Technology, Cloud Security, Cybersecurity, Artificial Intelligence and/or other Emerging Technologies. Travel 10-15% SKILLS: Adaptability, Authentic Communicator, Decision Making, Influencing other, Leadership & Mentoring, Organizing, Results Driven, Work Standards #TACorporate As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Additional locations: San Antonio, Texas Job Requisition ID: 00019643 Location Address: 539 S Main St Education: Bachelors (Required) Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Join Our Team as a Residential Electrician at Trinity Solar! $5,000 Sign-On Bonus!! Are you ready to power the future? Trinity Solar is on the hunt for a skilled Residential Electrician to join our dynamic team in the Electrical, Service, and Installation Departments. Dive into a rapidly growing industry where your expertise will help families transition to clean, renewable energy. Join us for steady work, a supportive team environment, and the rewarding feeling of contributing to a sustainable future. If you're a licensed electrician ready to make a difference, we want to hear from you! Pay: $25 - $45/hr depending on license/experience Sign-On Bonus: $5,000 Benefits: Health, vision, and dental insurance 401K savings plan with company match Life insurance available, both companies paid and elected Paid Time Off Why Join Us? Be part of a dynamic team committed to excellence and sustainability. Work with cutting-edge technology in a rapidly growing industry. Enjoy a collaborative environment that values your expertise and craftsmanship. What You'll Do: Upgrade & Install: Execute service upgrades, utility meter moves, and install solar-related electrical equipment, wiring, and devices-all while adhering to safety and code standards. Lead the Charge: Provide technical expertise and guidance to installation crews, ensuring top-notch workmanship and safety on every project. Team Player: Assist with staging materials and site prep, maintaining a clean, organized job site. Document Success: Complete project documentation, including photos and equipment diagrams, and submit promptly. Communicate Effectively: Interact professionally with customers, inspectors, and team members to ensure seamless project execution. Follow Safety Protocols: Adhere to company policies regarding vehicle care and safety guidelines. Qualifications We're Looking For: License Required: A valid State Electrical License. Code Knowledge: Strong understanding of the National Electrical Code (NEC) in residential settings. Experience Preferred: Previous residential solar experience is a plus, but we're eager to train motivated licensed electricians! Mechanical Skills: Comfort with tools and physical tasks, including climbing and lifting (40-50 lbs). Clean Record: A clean Motor Vehicle Report (MVR) and ability to pass a pre-employment drug screening.

Clean Harbors Cleveland, OH is looking for a Diesel Vehicle Mechanic to join their safety conscious team! This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors? Health and Safety is our #1 priority and we live it 3-6-5! Competitive wages; $26-$34 an hour based on experience Opportunity for increase after 90 days!!! Comprehensive health benefits coverage after 30 days of full-time employment Group 401K/RRSP with company matching component Opportunities for growth and development for all the stages of your career Access to company paid OEM certifications and trainings! Generous paid time off! Company paid training! Tuition reimbursement! Company provided uniforms and PPE! State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! RESPONSIBILITIES Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times; Move company equipment safely on yard as needed; Assist drivers with addressing outstanding vehicle issues; Perform preventative maintenance tasks and inspections on company vehicles and equipment; Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment, vehicles, and machinery; Complete daily checklist as required Assure that Equipment is properly parked/secured in compliance with facility permit and DOT requirements. Maintain facility via housekeeping duties Performs other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. QUALIFICATIONS What does it take to work for Clean Harbors? High School diploma or equivalent required Ability to work in a team environment 1+ years prior experience working on heavy duty-trucks and equipment. 1+ years DOT inspection experience required. Must provide own basic tools Related mechanical certifications preferred (not required) Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at ********************************** Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ******************** or **************. Clean Harbors and its subsidiaries are a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH #LI-DP2

Join Our Team as an Installation Crew Leader at Trinity Solar! $2,500 Sign-On Bonus!! Are you a licensed electrician or progressing towards licensure and ready to lead the charge in the renewable energy revolution? Trinity Solar is on the lookout for a motivated Installation Crew Leader to spearhead the installation of cutting-edge residential solar energy systems. If you're passionate about clean energy and eager to take on a dynamic leadership role, we want to hear from you! Pay: $30 - $35/hr Sign-On Bonus: $2,500 Benefits: Health, vision, and dental insurance 401K savings plan with company match Life insurance available, both companies paid and elected Paid Time Off Why Join Us? Make a Difference: Help homeowners transition to clean, renewable energy while contributing to a sustainable future. Career Growth: This is your chance to elevate your career in a booming industry, expanding your leadership skills and expertise. Collaborative Environment: Work alongside a dedicated team that values innovation, safety, and quality. What You'll Do: Lead the Way: Oversee and actively participate in the installation of solar modules, wiring, and electrical equipment, ensuring compliance with NEC requirements and company standards. Mentor Your Team: Provide daily guidance and technical expertise to your crew, fostering a culture of safety and high performance. Technical Problem-Solver: Tackle on-site challenges and ensure smooth project execution, all while supporting our customers. Document with Precision: Maintain thorough installation records, including site details and equipment configurations, to ensure transparency and quality. Communicate Effectively: Engage with customers, inspectors, and internal teams, keeping everyone informed throughout the project lifecycle. Safety First: Keep a safe and organized job site and ensure company vehicles and equipment are operated responsibly. Qualifications We're Looking For: Education: High school diploma or GED required. Licensure: Current Electrician License or documented progress toward licensure preferred. Experience: 1-2 years in solar installation, electrical work, or construction fields. Skills: Strong mechanical aptitude, ability to work at heights, and comfort with tools. Physical Stamina: Ability to lift 40-50 lbs regularly and perform physically demanding tasks in various outdoor conditions. Leadership: Proven ability to motivate teams and promote a positive work environment. Attention to Detail: Excellent time management and problem-solving skills. Reliability: Clean Motor Vehicle Report (MVR) and commitment to safety and quality workmanship.

Clean Harbors in Cleveland, OH is seeking a Class A CDL Driver to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. Why work for Clean Harbors? Health and Safety is our #1 priority and we live it 3-6-5! Focus on maintaining sustainability and cleaning the Earth Pay Range $27.00 per hour, BOE Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Company paid training and tuition reimbursement RESPONSIBILITIES Key Responsibilities: Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps) Operate a variety of Class A trucks Loading and unloading of trucks Manual labor on site to ensure fulfillment of customer needs Proper placarding of vehicles to meet Company and DOT requirements/regulations Maintain daily logs, time sheets, and various reports Follow all local, state (provincial) and federal compliance regulations and rules Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements Safely observe all corporate operating guidelines and procedures Observe all company environmental health and safety operating guidelines Performs other duties as assigned By position, site-remediation, equipment decontamination, and the handling of hazardous materials QUALIFICATIONS Required Qualifications: Valid Class A CDL Ability to obtain Hazmat and Tanker endorsement within 90 days of employment Ability to use various mobile devices Perform physical functions per job requirements Successfully complete a background check, drug test, and physical, by position Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Commercial driver experience Hazmat and Tanker endorsement Previous Hazmat experience Ability to operate a manual transmission Previous manual labor experience Clean Harbors is an equal opportunity employer. Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ******************** or **************. Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Randstad, in partnership with our client, is seeking a Senior UX Strategist for a long-term opportunity! The Opportunity Join one of the world's most respected, client-owned investment leaders as a UX Content Strategist. In this role, you aren't just writing copy-you are a foundational member of a cross-functional "crew," including designers, researchers, and developers. You will solve complex financial puzzles by creating intuitive, "plain English" content that empowers millions of individual investors to achieve their financial goals. Why You'll Love Working Here Mission-Driven Work: Every journey you map helps a real person save for retirement, education, or a first home. A Unique Culture: We lean into a collaborative nautical heritage-our employees are "crew," our cafeterias are "galleys," and our culture is built on the belief that we are "stronger together". Elite Campus Experience: Work on a stunning 87-acre campus in Malvern, featuring innovative office spaces designed for wellness and creative synergy. Inclusive Innovation: Join a team that champions accessibility (WCAG 2.1 AA) to ensure our tools work for every body and every mind. Your Core Responsibilities End-to-End Content Strategy: Create user flows, wireframes, and high-fidelity prototypes, focusing on how language drives the user experience. Complexity Management: Translate intricate financial workflows and data into simple, digestible, and actionable user journeys. Design Systems Advocacy: Utilize and contribute to an enterprise-wide component library to ensure a consistent brand voice across all digital platforms. Hypothesis Validation: Partner with research and data analytics teams to validate the feasibility and desirability of new features through experimentation. What We're Looking For Experience: 3+ years of professional UX experience with a strong portfolio demonstrating end-to-end strategy. Tools: Expert-level proficiency in Figma. Accessibility Mastery: Deep knowledge of inclusive design and WCAG accessibility standards. Approach: A "Team First" mentality with the ability to advocate for the user voice in high-level decision-making processes.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 01/30/2026. Posting Your New Career, Delivered! Hot Job, Cool Benefits! AmeriGas, the nation's largest propane distributor, has immediate openings for safety-minded, customer-focused Delivery Representatives at a location near you! Are you looking for an exciting career with a nationally known company and industry leader? AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Delivery Representative. Responsibilities As a local Delivery Representative, you will play a vital role in delivering propane to our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane delivery truck along provided delivery routes Filling residential and/or commercial bulk tanks with propane Delivering propane cylinders to commercial/industrial customers Perform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and Procedures Consistent use of required Personal Protective Equipment Depending on fluctuating needs, work 8 to 12-hour shifts What's In It for You? Home every day 17 PTO days plus 7 paid holidays $5,000 sign-on bonus Ongoing safety incentives Career advancement opportunities and annual performance reviews Uniforms provided Employee referral program Year-round medical coverage available as well as: 401k with company match, propane discount year-round, paid holidays and paid vacation Requirements All Delivery Representatives should have a valid class A or B CDL with hazmat and tanker endorsements Acceptable driving record Satisfactory completion of a DOT physical, drug test and background check Willingness to work outdoors in all weather conditions Ability to lift up to 70 lbs AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $29.50 to $30.50 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Estimated salary range: $100,000 to $145,000 per year, depending on experience, certifications, project requirements, location, and internal alignment/level ★ Enjoy profit sharing and excellent health benefits through the Federal Employee Health Benefits (FEHB) program Doyon Government Group (DGG) provides design-build and general construction services nationwide for government and military facilities. DGG is seeking an experienced Construction Quality Control Manager (QCM) to oversee quality programs on U.S. Army Corps of Engineers (USACE) or Naval Facilities Engineering Command (NAVFAC) federal projects. Key Responsibilities Develop and manage the project Quality Control (QC) Plan per contract requirements Perform daily quality inspections and coordinate required testing Coordinate with Superintendents, SSHOs, and subcontractors on new Definable Features of Work (DFOW) Review and manage submittals, RFIs, and quality documentation Track and resolve deficiencies through corrective actions and follow-up inspections Maintain daily reports, inspection logs, and quality records Qualifications 7+ years of professional construction experience Requires 3+ years serving as a QCM on USACE or NAVFAC construction projects Experience implementing a three-phase Quality Control (QC) plan Strong knowledge of contract specifications, quality control plans, and federal construction requirements Must be proficient with USACE RMS, NAVFAC QCS, or similar reporting software Must be proficient in Microsoft Office (Outlook, Excel, Word, Teams) and able to use independently Strong communication, documentation, and leadership skills Join Doyon to deliver safe, compliant, high-quality federal construction projects! Doyon Government Group is an equal opportunity employer and complies with all applicable non-discrimination obligations, including VEVRAA and Section 503 of the Rehabilitation Act.

Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management. Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description As a Global Process Chemist you will work closely with the Technology, Global Engineering and Regional Quality and EHS functions, being a key contact person for the development, roll out and sustainability of all initiatives relating to Veolia's CSM Chemical manufacturing operations with WTS business unit or related regional tolling operations. In this critical role, you'll provide technical guidance, direction and training to plant staff and operators on process chemistry and safety, ensuring awareness and adhesion to process operation parameters and safety limits. You'll lead and provide onsite support for startup trials on new and/or improved processes, provide on-time coverage for troubleshooting, participate in root cause analysis and implement corrective and preventive actions. Additionally, you will be responsible for supporting different new business opportunities, manufacturing process optimization, and cost-out initiatives in the business and ensure Safe Chemical Manufacturing. If you like the idea of doing meaningful work with a company that's doing big things to create a cleaner, more sustainable world for us all, here's more! Key Responsibilities: Support the Global Process Chemistry team to ensure all aspects of Process safety are addressed in projects and proper operating procedures are being applied at all reaction and blending plant operations. Be the chemical expert to support the global reaction plants and tollers during start up and commissioning of new products and support for ongoing production challenges. Maintain global communications to utilize resources in other regions and to ensure we meet the business needs of a global organization including Technology, Manufacturing, Sourcing, Product Quality, Business Units, and Supply Chain. Represent Global Process Chemistry in team meetings and projects to ensure process chemistry and process safety requirements are covered from a regional point of view while ensuring consistency with global standards. Support Cost-out initiatives by investigating the best operational strategy, in-house production vs tolling. Support the regional tolling technology transfer leader by assembling and providing toll manufacture SOPs, conducting onsite EHS, Quality and Engineering audits, and following up on completion of corrective actions. Being a critical part of the qualification team through the entire qualification process, providing guidance and support of scale-up trials ensuring safe operation and delivering products meeting quality expectations. Work closely together with the engineering team during the design and commissioning of new engineering projects at the Veolia CMS plants and provide technical process support Assemble process safety information, including P&IDs, equipment design data, and process parameters needed for successful completion of Process Hazard Analyses (PHA/HAZOP) Implement the company's internal standards for hazardous processes (e.g. flammable materials, combustible dust handling and neutralization reactions) etc. Implement, maintain, and improve all aspects of the company's process safety program. Maintaining compliance with applicable OSHA, EPA, EU, and country/state/local requirements including Process Safety Management, RMP, and Seveso. Drive continuous system and process improvements based on Digitization and Lean Six Sigma methodology. Qualifications Core Requirements: Master's degree in science, preferably Organic or Polymer Chemistry or equivalent University Degree. PhD is a plus! Detailed understanding of chemical plant processes and process safety. Expertise with chemical process instrumentation and WinCC Experience in conducting employee Process Safety training Support the process safety compliance culture associated with the Chemical Industry environment Other Useful Skills and Experience: 5+ years of professional chemical industry experience Familiar with WinCC or equivalent programs Familiar with NFPA 30 standard, OSHA regulations, Process Safety Management, EPA and SEVESO experience Knowledge of SAP is helpful Familiar with Brilliant fulfillment / Lean Manufacturing / Six Sigma Additional information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: ● Medical, Dental, & Vision Insurance Starting Day 1! ● Life Insurance ● Paid Time Off ● Paid Holidays ● Parental Leave ● 401(k) Plan - 3% default contribution plus matching! ● Flexible Spending & Health Saving Accounts ● AD&D Insurance ● Disability Insurance ● Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. ****Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity**** Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of VWTS, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 01/30/2026. Posting Your New Career, Delivered! Hot Job, Cool Benefits! AmeriGas, the nation's largest propane distributor, has immediate openings for safety-minded, customer-focused Delivery Representatives at a location near you! Are you looking for an exciting career with a nationally known company and industry leader? AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Delivery Representative in Fort Recovery, OH. Responsibilities As a local Delivery Representative, you will play a vital role in delivering propane to our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane delivery truck along provided delivery routes Filling residential and/or commercial bulk tanks with propane Delivering propane cylinders to commercial/industrial customers Perform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and Procedures Consistent use of required Personal Protective Equipment Depending on fluctuating needs, work 8 to 12-hour shifts What's In It for You? Home every day 17 PTO days plus 7 paid holidays $5,000 sign-on bonus Ongoing safety incentives Career advancement opportunities and annual performance reviews Uniforms provided $2,000 employee referral program Year-round medical coverage available as well as: 401k with company match, propane discount year-round, paid holidays and paid vacation Requirements All Delivery Representatives should have a valid class A or B CDL with hazmat and tanker endorsements Acceptable driving record Satisfactory completion of a DOT physical, drug test and background check Willingness to work outdoors in all weather conditions Ability to lift up to 70 lbs AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $28.00 to $29.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

The Senior Advanced Manufacturing Engineer will work with internal stakeholders and outside contractors to execute projects to support manufacturing scale up. This will require managing medium to large scale projects from concept, through capital funding planning and approval, and ultimately through successful implementation of automation and facility projects to meet the goals of the business. Responsibilities Demonstrated ability to effectively work with suppliers, outside contractors and stakeholders and recommend development of best practices to improve assembly/manufacturing methods and procedures. Impacts the achievement of part design related to design for assembly/manufacturing, error proofing, fixture design, and incorporating quality monitoring and improvement measures to drive results. Works independently and as part of a team on complex projects. Collaborate with partner groups in development and review of manufacturing process for new products, design changes, or new manufacturing methods. Recommend, evaluate, and implement new technologies to improve efficiency or enhance flexibility of manufacturing operations with a focus on launch site capability. Partner with leadership, operations and engineering teams to ensure that new equipment projects align with the manufacturing strategy and build plans. Be accountable to deliver operability, reliability, and functional integrity of automated manufacturing equipment for handover to operations. Lead facility expansion efforts to support scaling of manufacturing sites, new and existing. Education and Experience Bachelor's degree in engineering preferred Minimum of 10 years' experience Experience and understanding of complex automated manufacturing systems and components (electrical and pneumatic control, PLC and HMI devices, sensors, servo motors, vision systems, and robotics) Good understanding of supporting processes associated with the operations and maintenance of a production plant. Experience in manufacturing engineering and plant operations with direct experience in automated production processes, equipment support, and manufacturing best practices. Proficiency in use of AutoCAD Travel Overnight/North America: Less than 10% Working Conditions Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body. Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 35 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

CNC Machinist Holtec International seeks qualified applicants for the position of CNC Machinist at its manufacturing and production facilities in East Pittsburgh, PA. The CNC Machinist will be responsible for setting up and operating CNC machines to produce high-precision components. This role requires expertise in machining processes, blueprint interpretation, and quality control to ensure that all parts meet stringent specifications and tolerances. The CNC Machinist will collaborate with production teams, engineers, and quality control specialists to optimize machining operations and maintain the highest levels of efficiency and accuracy. Minimum required qualifications include High School Diploma or equivalent required. A 2-Year Technical Degree or completion of a relevant apprenticeship program required. Equivalent experience and on-the-job training may be considered in lieu of formal apprenticeship. 3-5 years of professional CNC machining experience required. Experience with CNC machinery and programming required. Ability to read and interpret technical drawings, blueprints, and schematics. Proficiency in using precision measuring tools and inspection equipment. Calculate dimensions and tolerances using mathematical principles. Additional desirable qualifications include experience with Fanuc, Siemens 840D, and HAAS controls preferred. Strong understanding of different metal types and machining characteristics. Ability to perform basic preventative maintenance on machines and tools. Troubleshoot and perform minor repairs on CNC machinery, including Haas, FPT, VBM, and Toshiba. Perform first-article inspections and make necessary adjustments before full production runs. Specific Areas of Responsibility: Accurately read and interpret CNC programs, blueprints, and work instructions.Set up and operate CNC Mills and Lathes using provided programs, fixtures, and tool lists.Adjust machine settings to ensure optimal performance and quality output.Load raw materials and verify proper alignment before machining. Conduct machine warm-ups and complete all safety checks prior to operation. Perform in-process inspections to verify that parts meet specifications and tolerances. Use precision measuring instruments such as micrometers, calipers, and bore gauges to inspect close tolerances and surface finishes. Document inspection results and report any deviations or defects. Ensure that finished parts conform to engineering drawings and quality standards. Identify and resolve programming errors, machine malfunctions, and tooling-related issues. Modify machine settings and optimize programs for efficiency and productivity. Continuously monitor operations and make real-time adjustments as needed. Apply knowledge of Geometric Dimensioning and Tolerancing (GD&T) to ensure accuracy in machining. Manage tools, assess tool life and wear, and utilize specialized tooling as required.Review daily job assignments and production schedules. Maintain accurate records of production output, scrap, and rework data. Ensure tools and equipment are properly calibrated and stored at the end of each shift. Participate in team meetings and provide feedback on process improvements. Report any mechanical issues or potential failures to the supervisor immediately. Follow all safety protocols to maintain a secure working environment. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references.

At UGI Utilities, Inc. we believe in providing a superior range of energy products and services to our customers in a safe, affordable manner. As our energy needs evolve, UGI will be there providing safe and reliable service that brings warmth and comfort to our 750,000 customers in 45 counties in Pennsylvania and 1 county in Maryland. We strive to reflect the communities we serve by attracting and retaining top talent, while maintaining a diverse workforce that embraces our culture of safety, service, and integrity. As an employee of UGI Utilities, you can expect a competitive total compensation plan and comprehensive benefits. Employees work in a collaborative environment, have upward mobility opportunities, and the ability to enjoy a true work life balance. To learn more about UGI's workplace culture, sustainability efforts, and commitment to inclusivity, we invite you to visit our UGI Corporate sustainability page . Apply to UGI Utilities today to share in our mission and support countless neighbors, friends, and families in providing best-in-class products and services! Job Summary Responsible for translating the business requirements for Operational Solutions into the SAP system via the SAP Configuration IMG (SAP Implementation Guide). This includes all aspects of project work, on-going functional enhancements, troubleshooting, and SAP-provided system and/or legal changes. Collaborates on all phases of the systems development life cycle (SDLC) with a focus on the analysis, design, and development of configuration-based solutions. Must continuously maintain and develop the necessary skillsets, both technical and analytical, to enhance value-added business solutions. Essential Functions Support the request and analysis phases of SDLC by assisting with documentation and estimates. Execute the design, development, testing, and implementation phases of SDLC by producing the prescribed deliverables. Review deliverables produced by junior staff. Work with business unit analysts and other IT technical resources to develop new systems and enhance existing systems to meet changing business, policy, and legislative requirements. Perform configuration to support defined business processes/functions. Complete timely testing and validation of changes. Develop strong business and system knowledge relating to the functional areas and assigned business unit(s). Support the maintenance and evolution of the logical data model and business process model for assigned business unit(s). Provide input and direction on business unit technology strategies. Troubleshoot incidents reported against IT applications. Assist in investigating issues to determine the root cause of problems. Support and monitor daily batch processing, responding to job failures in a timely manner. Provide 24x7 primary and/or secondary support to core applications considered business critical. Responsible for generating documentation throughout all phases of a project. This may include items such as project charters, technical specifications, and technical test plans. Document configuration processes and procedures for all relevant SAP systems. Use flow charts, screen shots, and step-by-step instructions to document procedures. Coordinate and provide thorough and consistent end-user training on all SAP systems. Follow established change management procedures to ensure that applications and modifications are implemented in a way that meets internal IT controls. Manage applicable vendor relationships to ensure on-going product support appropriate to the needs of the Company. Stay apprised of current trends in the business marketplace with a focus on product and service development, delivery and support, and applying key technologies. Provide input and direction on business unit technology strategies. Perform other dutes as assigned. Knowledge, Skills, and Abilities Possess strong analytical skills, which allows for the assessment of business processes and how they guide and shape application functionality. Comprehend technical design specifications and possess knowledge of development tools and technologies in support of the Information Technology architecture. Stay current with IT industry trends and emerging technologies; suggest and lead application of new technologies. Understand project plans and can clearly articulate their role, project goals, and timelines. Develop project plans for small projects. Partner with Project Managers to develop project plans for large projects and assist with resource management. Working knowledge of COBIT5-based IT Governance and Management framework or other structured industry standard methodologies. Strong verbal, written and interpersonal skills. Frequently present information to their team, department, and business areas. Experience and Education Bachelor's degree in Computer Science, Information Systems, or equivalent discipline. At least four years of SAP configuration experience performing system analysis, design, development, and production support duties. Two or more years should be in SAP FSM. Experience in SAP S/4HANA and/or SAP WM is desired. ITIL (IT Infrastructure Library) Foundation certification (at hire or within 12 months in position). Preferred: SAP professional certification in one of the specific disiplines lists above. 2+ years supporting a system with an RDBMS. Experience in systems analysis, design, and development. Experience developing technical specifications based on the requirements provided from business units. #LI-Onsite UGI Utilities, Inc is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with UGI policies. As a federal contractor that engages in safety-sensitive work, UGI cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Reporting to the Hardware Engineering Manager, the Electrical Designer will provide design and document support to the Hardware Engineering and other engineering groups as related to the development of Eos Battery Storage Systems. This is an internally facing position for a Electrical Designer with solid technical experience and the ability to work in a fast-paced work environment. Responsibilities Working from detailed sketches or off redlines to prepare site plans, single- and three-line electrical diagrams and detailed drawings within CAD/MicroStation/SolidWorks Draft Sight in 2D and 3D environment. Generate point maps for all hardwired and digital I/O for BESS control systems from detailed sketches or redlines. Develop single Line Diagrams, layouts, schematics with all standards, clearances. Create spatial layouts utilizing map importing of KMZ and SHP typical files. Understand, use, and contribute to establishing company standards for drafting, including layer names; line and character styles; drawings and file names for sheet layouts. Champion and manage project-specific BOMs (Bill of Materials) in collaboration with the Manufacturing group. Own and manage the internal lessons learned database, ensuring accuracy with input from Engineers. Support the generation of drawings for RFIs and RFPs with customers and business partners. Review and analyze documents, identifying drawing and specification conflicts, insufficient information, and missing dimensions while contributing ideas to enhance efficiency. Work independently with minimal guidance. Knowledge, Skills, and Abilities Extremely proficient in CAD (2D & 3D) US Industry Standards (i.e. - ANSI, IEEE, NEMA, NEC, UL) Electrical Design for Constructability Ability to self-direct to a goal and achieve independent success. A team-player attitude and strong written/verbal communication skills are a must. Attributes Required Fostering Teamwork: As a team member, the ability and desire to work cooperatively with others on a team; the ability to demonstrate interest, skill, and success in a collaborative environment. Building Collaborative Relationships: The ability to develop, maintain, and strengthen partnerships with others inside or outside the organization who can provide information, assistance, and support. Strong spirit of collaboration and proven ability to work across diverse groups. Gives feedback thoughtfully and receives it gracefully. Comfortable with distributed decision making and empowerment. Forward Thinking That Can Scale: Balancing “scrappiness” and strategic thinking. The ability to anticipate the implications and consequences of situations and take appropriate action with speed and clarity in preparation for possible contingencies. Must be able to simultaneously focus on big picture, details, and driving results. Personal Credibility and Confidence: Demonstrates concern for being perceived as responsible, reliable, and trustworthy. Highly self-motivated and results-driven with a can-do attitude. Does what he/she commits to doing. Education and Experience Associate's degree in engineering technology, computer aided designed, or similar required. Minimum of 2 years' experience Travel Overnight/North America: Less than 10% Working Conditions Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body.

The Manufacturing Engineering Manager is a strategic and hands-on leadership role responsible for overseeing a team of manufacturing, electrical, mechanical and industrial engineers, engineering assistants and technicians. This team's primary responsibilities include the sustaining and life cycle management of automation equipment, production tools, machines and other related equipment used in the manufacturing processes associated with EOS products and subassemblies. The ideal candidate will combine technical expertise, process rigor in the manufacturing environment, with strong leadership and project management capabilities to drive continuous improvement, ensure system reliability, and support operational excellence. Responsibilities: Leadership & Team Management Lead, mentor, and develop a high-performing team of manufacturing engineers, engineering assistants and technicians Foster a collaborative and innovative engineering culture. Conduct performance evaluations, set team goals, and support professional development. Establish metrics to monitor team and equipment performance and establish a standard continuous improvement approach Technical Oversight Provide expert guidance on engineering methods, problem solving and machine and automation improvements Ensure standardization and documentation of equipment Oversee the integration of new automation technologies and upgrades to existing systems. Project & Operations Management Manage automation projects from concept through implementation and commissioning. Collaborate with cross-functional teams including engineering, production, maintenance, IT, and external vendors. Ensure timely delivery of projects within scope and budget. Support & Troubleshooting Lead root cause analysis and resolution of complex process issues Support production teams with real-time troubleshooting and system optimization. Ensure compliance with safety, quality, and regulatory standards. Knowledge, Skills, and Abilities (KSAs): Technical Knowledge Understanding of PLC controls. (e.g., Allen-Bradley, Siemens, Mitsubishi). Robotics and End-of-arm-tooling design and development Understanding of machine safety systems, sensors, and actuators. Leadership & Communication Proven ability to lead and develop engineering teams. Strong interpersonal and communication skills for cross-functional collaboration. Ability to translate complex technical concepts into actionable plans. Ability to grow a team's capabilities, competencies and ways of working Translate reactive work into preventative measures using a continuous improvement mindset. Teach the team data driven decision making Analytical & Problem-Solving Skills Strong troubleshooting and diagnostic skills for process, automation and electro-mechanical equipment. Experience with root cause analysis and continuous improvement methodologies (Lean, Six Sigma). Project Management Ability to manage multiple projects simultaneously with competing priorities. Experience with project planning tools and methodologies. PMP certification is a plus. Qualifications: Bachelor's degree in electrical, mechanical, industrial engineering, or related field 10+ years of experience in a manufacturing environment, with at least 5 years in a leadership role. Experience in high-volume manufacturing environments preferred. Familiarity with Industry 4.0 and smart manufacturing technologies is a plus. Continuous improvement background preferred Multi-site and multi-product line environment desired

We are seeking a highly organized and detail-oriented Estimator / Project Manager to oversee project estimation and full project lifecycle management. The ideal candidate will have a strong background in cost estimating/quoting, planning, and project delivery, ensuring projects are delivered on time, within budget, and to the highest standard of quality. Key Responsibilities: Estimating Duties: Analyze drawings, specifications, and other documentation to prepare accurate cost estimates. Assess labor, material, and equipment requirements for projects. Identify potential risks and build contingencies into the pricing. Participate in pre-bid meetings and site visits. Collaborate customer and in-house team to ensure all expectations are met. Project Management Duties: Plan, execute, and finalize projects according to strict deadlines and budgets. Work with scheduler to coordinate internal resources for the successful execution of projects. Develop detailed project plans and schedules. Monitor and track project progress and handle any issues that arise. Ensure compliance with health & safety, quality standards, and regulatory requirements. Participate in weekly update meeting and contribute to weekly forecast. Manage procurement of materials and subcontractors. Control costs and report on project performance to management. Requirements: Qualifications: A degree (2 or 4 year) is a plus but not required. Professional certifications (e.g., PMP) are a plus. Experience: Minimum 10 years' experience in a machine and fabrication shop environment. Proven track record of managing projects ranging from $10,000 to $500,000. Experience with estimating software and project management tools (e.g., E2). Skills: CAD/Drawing Ability to read prints Strong numerical and analytical skills. Excellent communication, negotiation, and interpersonal abilities. High attention to detail and accuracy. Ability to manage multiple priorities in a fast-paced environment. Knowledge of contracts Proficient in Microsoft Office Suite (Excel, Word, Outlook). Working Conditions: Office-based with some site/customer visits. May require occasional evening or weekend work to meet deadlines. Why Join the team? Competitive wages Family Owned and Operated Opportunities for career progression. A dynamic, supportive work environment. 100% Paid Medical, Dental & Vision Insurance HSA Safe Harbor 401K (3%) Life Insurance Paid Vacation Available Supplementary Insurance

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work. Prepare materials for welding, fit the components, and perform welding process per drawing specification. Weld components in all positions consistent with quality requirements. Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols. Monitor the fitting, burning, and welding process to avoid overheating of parts. Use tools of measurement for checking dimensions of parts, work to tolerances. Visually examine welds for quality. Operate hand and power tools common to the welding trade. Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment. Maintain work area in safe, clean, and orderly condition. Operate various types of automatic, semi-automatic or manual welding equipment to join metal segments using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and submerged arc welding. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas. This role can be physically demanding and may require the ability to lift up to fifty (50) pounds. Minimum and Preferred Qualifications: High school degree or equivalent required. Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.) Ability to read blueprints and transfer blueprint information to material. Minimum of 2-4 years welding in heavy plate manufacturing required. **MUST pass 2G and 3G FCAW weld tests

Requirements Technical Degree or equivalent field experience. 5+ years experience with Rosemount products is preferred Familiarity with Rosemont and Micro Motion Familiarity with Foxboro, Endress&Hauser, Yokogawa, and other instrumentation Ability to use hand and power tools, including drills, saws, shovels, picks, wrenches, tube benders and tube cutters. Understand instrumentation and be able to read blueprints. Understand and be able to perform electrical work. 480V experience is preferred Ability to work with electrical conduit and fittings is a plus. Be proficient in MS Word, Excel and Outlook. Familiarity with TCP/IP, networking fundamentals, Modbus, RS232/485, and Hart communications Experience managing customer projects and working independently Current driver's license Proficient with MS Office suite Ability to work any overtime that is required to complete a particular assignment (occasional weekend work) Ability to travel out of town and work in the field when required. Core Competencies: WORK COLLABORATIVELY - Promote an inclusive and positive work environment that encourages collaboration and team building across all levels of the organization.? Work with others to resolve obstacles that may prevent the organization from achieving its mission. CUSTOMER FOCUS - Demonstrate the desire and knowledge to understand customer needs.? Provide personalized, professional, and courteous service, accurate information, continuous communication, and the ability to handle customer concerns in an appropriate manner. INTEGRITY - Behave ethically, act fairly, and take responsibility for accomplishing work goals. Additional Details: We provide our team with everything needed for success, including world-class products, company vehicle for work/personal use, excellent continuous training, and all necessary work equipment. We reward hard work and success with a competitive base salary and benefits package, as well as a retirement savings program, which includes 401(k) with company match and profit sharing. Salary is based on experience. EEO/AA/M/F/Veteran/Disability