Equipment operator jobs in Oyster Bay, NY - 38 jobs

Reports to: The Crane Operator is responsible and accountable to the Yard Supervisor Supervises: None. The Crane Operator is responsible to maintain and operate overhead crane and forklift to lift, move and position loads in a safe manner. Plan, specify, and position rigging equipment for accomplishing work in a safe and efficient manner. Operating cranes to offload and backload tugs, barges, and etc. Manipulate crane controls to regulate speed and direction of crane and hoist movement according to written, verbal or signal instruction. Determine load weights and check them against lifting capacities to prevent overloading. Clean, lubricate, and maintain the crane, including mechanisms such as cables, pulleys, or grappling devices, making repairs as necessary. Inspect cables or grappling devices for wear and install or replace cables as needed. Complete daily checklist, delivery logs, maintenance schedule and all other necessary paperwork neatly and accurately. Maintaining the appearance of the forklift and crane by keeping it clean, free of debris and painted. Follow all safety procedures during all crane and forklift operations. Know and understand McAllister's Safety Policy and comply with all the requirements of the Quality Safety Management System. Assisting other departments as needed. Ensuring personnel under your direction work in a safe and efficient manner. Other duties as assigned. Minimum Requirements: Proven experience working with an overhead crane, in all types of weather conditions. Licensed as required under federal, state and local law. Crane Operator Certificate from a nationally recognized and accredited certification program preferred. Current Transportation Workers Identification Card. Physical Requirements: The employee is frequently required to stand, walk, sit, use hands and fingers, reach with hands and arms; climb, balance, stoop, kneel, crouch or crawl. The employee will frequently use both hands to grasp rails while climbing, to hold and carry tools equipment, to operate tools and machinery. The employee must be able to lift 50 pounds or more on a consistent basis. Training Requirements: New Hire Familiarization Checklist (MCA-001) Crane Operator Training FLSA Status: Non-Exempt *This position description does not promise or imply that the functions listed are the only duties to be performed or that the position may not change or be eliminated. Employees are always expected to follow their supervisor's instructions and to perform the tasks requested by their supervisors.

TOWN OF NEW CANAAN EQUIPMENT OPERATOR II In compliance with the Agreement with Local 1303-13 and the Town of New Canaan Article 17.0 and 17.1, the Town of New Canaan, Connecticut seeks qualified candidates for the position of Equipment Operator II to work under the direct supervision of the Highway Superintendent. Position involves the operation of trucks and other heavy equipment such as mowers and sand spreaders; routine manual labor of all types including asphalt, brush cutting and drainage; may supervise a crew of men; makes few personal contacts other than immediate associates. Desired qualifications: completion of a two-year high school course, three years experience operating light and heavy equipment, CDL license required. Background investigation and pre-employment physical required. Equal Opportunity employer M/F/D/V. Salary range is $30.19 - $39.30 per hour depending on qualifications. Complete the online application which can be found at ****************** under Job Opportunities and attach a cover letter and resume with at least three references. The position will be filled as soon as a qualified candidate is selected.

Exodigo is the new gold standard for non-intrusive discovery. Our subsurface mapping solutions combine advanced sensors, 3D imaging, and AI technologies to provide a clear picture of the underground for customers across transportation, utilities, construction, and more. We solve the underground by locating pipes, cables, soil layers, rocks, minerals, and even groundwater - so our partners can decide where to design and build safely, with confidence. Headquartered in Tel Aviv and the San Francisco Bay Area, our team brings unparalleled experience in AI and signal processing from elite Israeli intelligence units and is backed by top industry partners. We are experiencing sky-rocketing growth and closed a historically large $96M Series B round in July of 2025. Job description As field operation technician, you play a critical role in scaling Exodigo's growth. Here are some key roles and responsibilities of this job: * Operate our underground discovery tools using patented carts and drone (for moreinformation visit *************** * Identify underground assets using advance technology in a variety of sensors (Electromagnetic, magnetic, metal, GPR, seismic and more) * Identify and resolve operational issues on site in coordination with R&D and operation managers * Document interactions, site information and operation reports in organizational software. * An opportunity to work with cutting-edge technology that will revolutionize the construction, transportation and utility industries. Requirements * Strong attention to detail * Passion for accuracy * Must have flexibility in scheduling to meet the needs of the business, including domestic travel across the US (up to 100%). * Physically demanding- must be able to stand and walk up to eight hours per day, and work at night shifts at times. * Able to handle equipment when loading and unloading weighing between 20 and 40 lbs. * Driver's License and the ability to ride in a vehicle up to four hours to travel to and from job sites The Ideal Candidate * 2 years of experience with field operations, preferably within a startup environment. * Ability to travel domestically to jobs in urban and remote environments across the United States * Background in earth sciences, engineering, construction or utility mapping is highly desired * Technological savvy, ability to troubleshoot technological issues on-site * Excellent English - mandatory (read/write/speak) * Ability to work in a team-goal-oriented environment. * Comfortable working with a global team (U.S, Europe and Israel) * Strong organizational, communication, and interpersonal skills * Ability to proactively recommend ideas and execute planned activities * Experience with industries such as - transportation, utilities, and construction - a plus * OSHA 10 Certificate- a plus * FAA part 107 drone pilot- a plus Salary range: $65,000 - $75,000 Location: Across US Metros within reasonable access to major airports such as New York, Boston, Denver, Los Angeles, Seattle, Atlanta, Dallas, Houston, San Francisco, San Jose, etc. Learn more Our mission is to power the next era of underground exploration - saving time, money, lives, and the planet. We are focused, intentional, confident, and hard working. We solve big problems, but we are approachable, open-minded, and love hard questions. You can learn more about us on our website or check out this short video. Apply on our careers page, via Linkedin or send your resume to ***************************

Con-Strux is a concrete and wood recycling company with many locations throughout Long Island. Established over 30 years ago, Con-Strux has maintained their goal of providing local solutions to global problems. Con-Strux has expanded their services to include street sweeping, mobile crushing, and transportation. Their focus is sustainability and customer satisfaction. Con-Strux remains a frontrunner in their industry by recycling concrete crushings with only environmentally conscious and compliant processes. ************************** Responsibilities General Labor for Concrete Crushing Machine Movement and handling of heavy materials/equipment, must be able to lift 70 lbs. Complete tasks and projects using hand tools Maintain production and quality control Clean up site and materials daily List of duties and responsibilities may be expanded to include other duties as necessary Above all else, ensure safety at the worksite Qualifications No experience necessary. Will train the right, teachable candidate. Must be able to pass a drug test Must have a valid driver's license. Heavy equipment or skid steer experience a plus. Knowledge of Concrete Crushing Machines a plus Knowledge of Wood Grinder Morbark and Hogzilla a plus Knowledge of Loaders and Excavators a Plus Location: Eastport, NY Compensation: $20-25/hour. Overtime, 401K, and full Union Benefits Equal Employment Opportunity Posillico Civil, Inc. is committed to maintaining a working environment that promotes teamwork and diversity and that is free of any and all forms of unlawful discrimination and harassment. Accordingly, all of its employment-related activities will be administered without regard to race, color, religion, sex, national origin, age, disability, veteran status, marital status, personal appearance, sexual orientation, gender identity or expression, family responsibilities, matriculation, political affiliation, genetic information, or other legally protected personal characteristic. #LIOnsite Posillico Civil, Inc. together with its parent, subsidiaries, affiliates, partners and joint ventures (collectively “Posillico”) do not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to Posillico or an employee of Posillico, by mail, electronically, or otherwise will be considered property of Posillico. Posillico will not pay a fee for any placement resulting from the receipt of an unsolicited resume. Posillico will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. As a condition for payment, an Agency shall have an agreement signed by an authorized Posillico representative. Verbal or written communications from any employee of Posillico shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be the property of Posillico.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customers' needs. * Ensures equipment is maintained according to company standards and customer contracts. * Operates company equipment safely. * Assists with the maintenance of company equipment and vehicles. * Records vehicle information accurately and legibly. * Operates digital camera or other basic vehicle documentation and tracking devices. * Sets up yard for auctions within company timelines. * Provides service to customers as needed. * Maintains a positive and professional demeanor. * Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.). * Must be able to load and unload vehicles as required. * Must be able to pass training and safety requirements. * Performs other duties as assigned. Required Skills & Experience: * HS diploma or GED preferred. * At least two years of work experience, preferably in an outdoor environment. * One year of loader or forklift experience, certification preferred. * Excellent customer service attitude and skills. * Excellent communication skills, written and verbal. * Positive attitude/High Integrity. * Ability to operate heavy equipment. * Must be able to multi-task in a fast-paced environment. * Strong attention to detail. * Occasional O.T. as needed. * Bilingual skills a plus. Pay is $25.75- $29.98 per hour Benefits Summary: * Medical/Dental/Vision * 401k plus a company match * ESPP - Employee Stock Purchase Plan * EAP - Employee Assistance Program (no cost to you) * Vacation & Sick pay * Paid Company Holidays * Life and AD&D Insurance * Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: * E-verify Participation * Right to Work

**The Best Teams are Created and Maintained Here.** + The Snow Equipment Operator is responsible for performing safe and efficient snow removal operations throughout the winter season. This role involves operating snowplows and other heavy equipment to clear designated areas. **Duties and Responsibilities:** + Remove snow using a snowplow and heavy equipment for extended periods of time, depending on the amount of snowfall. + Be available and prepared to report to work each time it snows, either to a central location or directly to the jobsite + Deposit removed snow in appropriate locations, avoiding obstruction of trees, shrubs, fire hydrants, and sidewalks. + Identify and report any concerns or incidents to the direct supervisor. + Maintain accurate and timely documentation by completing job sheets immediately following each snow removal operation. + Be aware of safety issues or concerns and report them to the appropriate supervisor. + Perform additional related tasks assigned by supervisor or manager. **Education and Experience:** + High School Diploma or GED + Valid Driver's License and the ability to drive to a variety of work locations in assigned territory. + Reliable transportation to and from any work site. + Prior experience operating snowplow equipment. + Participate in routine maintenance of equipment. + Experience working efficiently in a production-driven / fast paced environment. + Physically able to work outside, sometimes in extreme weather conditions with sporadic hours based on a snow event. + Ability to safely operate equipment. + Effective communication skills. + Willing to dress appropriately for all weather conditions. + Able to work overnight in the winter month. **Physical Demands/Requirements:** + Ability to lift and 50 pounds. + Ability to climb in and out of equipment. + Ability to sit for extended periods of time. + Ability to bend, stoop and twist continuously throughout the day. **Work Environment:** + Work in/or about situations near direct automotive traffic + Work near or about natural bodies of water. + Ability to work in extreme conditions - temperatures may exceed 100 degrees Fahrenheit. + Ability to work in direct sunlight for extended periods of time. **_BrightView Landscapes, LLC is an Equal Opportunity and E-Verify Employer._** **_This job description is subject to change at any time._** **Compensation Pay Range:** $28-$33/hour depending on experience **_BrightView offers a suite or health, wellness, and financial benefits to full-time team members. Benefits offerings for full-time team members include medical, dental, and vision insurance, ancillary and voluntary products, a 401k savings plan with employer contributions, and 6 to 9 company paid holidays per year. Employees may also be eligible to receive paid time off for vacation and/or sick leave, tuition reimbursement, and/or potential variable pay opportunities based on position and performance. A detailed benefits package will be provided during the interview process_** _._ _It's Not Just a Team. It's One BrightView._

Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Project objective The goal of the project is to help update maps information. The data collectors will be given specific routes around public streets and areas, specifically targeting commercial districts and historical sites. The project is expected to last around 4 months and will cover different city/state zones. The ideal candidate enjoys walking/driving, knows well the area, traffic trends, is highly responsible and reliable.Note: Candidate must be physically active - with ability to do so for extended periods of time. The schedule expected on the project is Monday-Friday, 8 hours/day 40 hours per week.Responsibilities: (80%) Accurate and timely collection, extraction and processing of data using proprietary software. (5%) Installing and testing hardware (requires use of technical/installation equipment). (5%) Identify and troubleshoot recurring problems and work with team to make improvements. (5%) Raise dependencies and risks when performing operations. (5%) Support device inventory maintenance and setup and prepare devices for operations.. Minimum requirements: Ability to work both independently and within a team. Ability to efficiently plan, document, and communicate status on projects. Strong verbal and written English communication skills with the ability to communicate cross- functionally with local and Global teams/stakeholders. Ability to navigate ambiguity and make quick course corrections when necessary. Aptitude for learning new technologies. Strong organizational skills and superior attention to detail. Strong analytical and problem-solving skills. Ability to meet deadlines and schedules and be accountable. Willingness and ability to travel within city limits as well as in the region. Ability to work on feet for several hours and in indoor/outdoor environments during all types of weather (up to 10 miles per day). Clean driving record and a valid Driver's License. Preferred Qualifications: BA or BS degree or equivalent practical experience. Experience using Android, iOS, or in-development tools, Familiarity with Mobile & web technologies. We would be happy to get to know you and your skills better and see how we can support each other's growth. Please apply and let's meet!We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Shift: 2nd shift, Mon-Fri 3pm-11: 30pm Duration: 12 Months Pay range: $26.00 - $28.00 Hourly Onsite Job How Will You Make an Impact? The Equipment Operator, Digital Manufacturing has a significant impact on the overall efficiency and accuracy of the labeling process. By operating and maintaining the equipment used for digital labeling, the operator ensures that labels are produced in a timely manner and meet required quality standardsA Day in the Life: Responsible for setting up all computerized digital equipment for print production runs using proprietary software applications according to Standard Operating Procedures (SOPs) and Work Instructions (WIs). Monitors and troubleshoots operations during the run and processes rejects according to WIs. Ensures that the equipment and materials are operated and maintained at the highest standards, following SOPs including post-production equipment cleaning, keeping the equipment room organized, and maintaining the manufacturing warehouse in a clean and organized manner. Inspects printed material during production and corrects any printing mistakes to ensure the printed sheets align with job order and customer profile specifications, as well as quality and construction specifications and cGMP standards. Understands and follows all SOPs and WIs that relate to equipment operations and applies current Good Manufacturing Practices (cGMPs) in all areas of responsibility. Education: High school diploma or equivalent required. Experience: Minimum of 2 years of work experience in a manufacturing, operations, production, lab setting or related field Preferred: Experience in a cGMP environment Knowledge, Skills, Abilities: •Knowledge and experience in the printing industry and proficiency in computer operations, including data transfer and file management. •Mechanically inclined with the ability to accurately read measurements, troubleshoot issues and identify potential solutions associated with a variety of constructions. Skills in handling and mounting flexible tooling, performing roll splicing using automated equipment, and operating computerized digital equipment are also important. •Detail-oriented and the ability to work in an organized manner. Must be capable of handling confidential information and communicating in a professional manner with internal customers. Physical Requirements / Work Environment •Fast-paced environment which relies on teamwork to ensure jobs are completed within established timelines. •Ability to lift and maneuver materials weighing up to 70 lbs. Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

All Star Paving & Sealing LLC, Connecticut's premier asphalt paving and maintenance contractor, is excited to announce a career opportunity for a Heavy Equipment Operator. Become an integral part of a dynamic and reputable family-owned business with over 25 years of excellence in the industry. As a leading full-service asphalt contractor, we take pride in providing top-notch services and building strong relationships within our communities. Our team handles everything from residential driveways and parking lots to major roadway projects, along with concrete work, milling, grading, excavation, masonry, drainage and asphalt maintenance. Pay: $25-$35/hr Benefits/Perks: Retirement and Company Match Program after 1 year of service. Supportive, family-oriented culture and opportunities for professional growth. Hours: Seasonal position: April - December Mon - Fri 6am - 4pm, some Saturdays Duties: Operate machinery according to established procedures and safety guidelines. Set up machines before starting production, including calibration and configuration. Monitor machine performance and adjust settings to maintain product quality. Inspect finished products for defects and ensure they meet specifications. Troubleshoot issues and perform basic repairs or adjustments as needed. Maintain accurate production records, including output counts and downtime logs. Conduct routine cleaning and maintenance to keep equipment in optimal condition. Follow safety protocols, including lockout/tagout procedures and use of PPE. Collaborate with supervisors and technicians to optimize productivity. Report equipment malfunctions or safety hazards promptly. Qualifications: High school diploma or equivalent. Experience operating manufacturing or industrial machinery preferred. Basic mechanical aptitude and problem-solving skills. Ability to read blueprints, schematics, or technical documents (preferred). Good attention to detail and quality control awareness. Ability to stand for long periods and lift moderate weights as required. Strong understanding of safety practices in industrial environments. Key Skills: Mechanical and technical skills Attention to detail Time management Communication Troubleshooting Teamwork Basic math and measurement ability

Pay Range: $24-$26 Available Shifts: 1st Shift - 07:00AM-03:30PM 2nd Shift - 03:00PM - 11:30PM Equipment Operator, Print and Auto Inspection - Bohemia, NY (CORE) As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: Clinical Labeling Services, part of the Clinical Trials Division, located in Bohemia, New York provides leading clinical label design, production, and management services for the pharmaceutical and biotechnology industry. Our advanced inspection software, full in-house variable and non-variable print capabilities, and proprietary translation and regulatory approval system are designed to reduce overall clinical trial label cycle times. How Will You Make an Impact?: The Equipment Operator, Print and Auto Inspection role plays a crucial part in ensuring smooth clinical label manufacturing processes by computerizing (print) variable/static text on labels using niche automated inspection inkjet equipment within a team that is dynamic and fast-paced. A Day in the Life: Demonstrates a solid understanding of the label manufacturing process of a wide array of label constructions using both automated and non-automated inkjet equipment following client-approved proofs and associated documents to manufacture labels per established specifications. Sets up computerization production runs using the proprietary software application CLPS, as per department Standard Operating Procedures (SOPs) and Work Instructions (WIs) while monitoring all label production processing for accuracy and completeness by applying current Good Manufacturing Practices (cGMPs) in all areas of responsibility safely and efficiently. Education: High school diploma or equivalent required. Experience: Required: Minimum of 2 years of work experience in a manufacturing, operations, production, lab setting or related field. Preferred: Experience in a cGMP environment. Knowledge, Skills, Abilities: Knowledge and experience in the printing or manufacturing industry with proficiency in computer operations of transferring data, MS excel and outlook, file management, are required. Candidates should be mechanically inclined with the ability to accurately read measurements, troubleshoot issues, strong analytical and problem-solving abilities to identify potential solutions associated with various label constructions, skills in handling fanfold and rolled materials, performing roll splicing using manual equipment, and operating computerized digital inkjet equipment are also important Skill Requirements: •Computer Literacy - Vision System & File Manipulation •Quality Orientation - 100% Accountable for Finished Product •GMP Expertise - Extensive Documentation Requirements Cross Training - Expectation to operate multiple pieces of equipment Physical Requirements / Work Environment Use Personal Protective Equipment (PPE), be able to stand and move about including reaching, bending, stooping, grasping and understand chemical hygiene. Use hand tools and equipment including forceful gripping, grasping, pushing, and pulling. Lifts and maneuver materials weighing up to 50 pounds max unassisted. What We Offer Compensation Competitive Hourly Pay Rate Additional shift differential for 2nd shift and 3rd shift positions Annual performance-based bonus Annual merit performance-based increase Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1 Paid Time Off & Designated Paid Holidays Retirement Savings Plan Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued. Apply today! **************************** Thermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status. Accessibility/Disability Access Job Seekers with a Disability: Thermo Fisher Scientific offers accessibility service for job seekers requiring accommodations in the job application process. For example, this may include individuals requiring assistance because of hearing, vision, mobility, or cognitive impairments. If you are a job seeker with a disability, or assisting a person with a disability, and require accessibility assistance or an accommodation to apply for one of our jobs, please submit a request by telephone at ***************. Compensation and Benefits The hourly pay range estimated for this position Sr Operator, Manufacturing based in New York is $17.85-$26.77. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Hicks Nurseries has been growing with Long Island for generations - and that means we're always looking for dedicated, hands-on people to join our team. Even if you don't see the perfect opening right now, we encourage you to apply so we can learn more about your experience and contact you when a suitable opportunity becomes available. We hire for full-time positions such as: * Department Team Leaders * Nursery and Greenhouse Operations * Receiving/Logistics Team Leaders * Administration Why Hicks Nurseries? We're a family-owned business built on teamwork, trust, and excellence. Our people stay because they love what they do and who they do it with. We offer: * Competitive hourly pay based on experience and skill * Comprehensive benefits (health, dental, vision, 401k, PTO, employee discount) * A positive, team-oriented environment where effort is recognized and rewarded * A supportive workplace where your ideas and initiative matter * Opportunities to learn and grow across departments Must be comfortable engaging with people, with a focus on exceptional customer service * Communicate and work effectively as part a team with fellow employees, customers, and vendors alike * Ambitious, hard-working, high energy with a positive attitude * Take pride and ownership in your work, while contributing to the overall success of the company * Strive to always learn and grow professionally * Must be reliable, dependable, and motivated * Ability to work a flexible schedule to accommodate business needs * Ability to life a minimum of 50 lbs * Ability to work in various weather conditions and temperatures

Job Responsibilities * Safe operation of a variety of heavy construction vehicles and equipment. * Responsible for daily inspection of equipment and performing basic repair and maintenance as needed to ensure the safe working condition of all equipment. * Read and understand various types of load charts. * Maintain a clean work environment. Qualifications/ Requirements * Minimum of 3 years of experience as a heavy equipment operator. * Knowledge of operation and maintenance of a variety of heavy construction vehicles and equipment. * Knowledge of principles and practices of routine and preventative maintenance of heavy construction vehicles and equipment. * Knowledge of principles and procedures of documentation and record-keeping including operators' books. * Knowledge of occupational hazards and standard safety practices. * Knowledge of safe load securing practices/rigging experience is a plus. * Understanding of hand signals. * State licensing may be required depending upon the state. * NCCER certification is a plus. * CDL license is a plus. * Must hold a Massachusetts and Connecticut hoisting license. Cianbro is an employee-owned, tobacco-free, equal opportunity employer, we do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, sexual orientation, genetic information, or other legally protected status.

Maintenance/Custodial Date Available: ASAP Additional Information: Show/Hide Scarsdale School District is looking for Seasonal Grounds / Driver Equipment Operators. Applicants should be familiar with grounds keeping duties and equipment, for example: * Cut and trim grass, weed and mulch shrub beds, and leaf removal. * Knowledge of the operation and maintenance of equipment necessary to perform these tasks. * Assist maintenance staff in all phases of building support. A driver's license is necessary to be considered for this position. 40 hours a week, 6:00am to 2:30 pm, Monday through Friday Position runs through December.

Almstead Tree and Shrub Care is a second-generation, family-owned arboriculture firm that has been offering environmentally conscious services the NY, NJ, and CT tri-state area since 1964. We are a TCIA accredited company that values our employee's professional aspirations, career development, safety and quality of life. We are looking for passionate professionals who want to enhance their career in tree care! We offer generous compensation, year-round work, paid time off, health and retirement benefits, inclusive company culture and so much more! If you are ready to enjoy going to work every day, come grow with us! Basic Function Tree Crew Leaders serve a pivotal role leading tree care crews, with the responsibility of managing job site production, delegating to crew members, enforcing company safety policies, providing training and working alongside the crew in all jobsite functions. Crew Leader Responsibilities Direct crew in performance of work to be done; assign job specific tasks. Supervise workmanship to ensure the work meets job order specifications. Walk job site with consulting arborist and develop work plan. Ensure crew members wear personal protective equipment at all times, and that safety practices and measures are followed. Manage time, equipment and materials to ensure jobs are completed in an efficient manner. Direct the cleanup of job site and ensure all equipment and supplies are secured on the trucks. Communicate with client to ensure work meets their satisfaction Reorder materials and supplies needed for trucks and equipment. Adhere to company safety and training policies to maintain safe and controlled work environment at all times. Confirm that all maintenance checks and services on equipment are followed. Ensure that crews are properly trained and understand company safety policies and procedures. Participate in all job site safety briefings. Demonstrate and perform proper climbing techniques and procedures, pruning skills, application of approved knots and rigging techniques. Operate all equipment in a safe manner Requirements 5-7 years industry experience in residential tree care with the ability to train/direct crew members in all facets of tree care. Knowledge of native and introduced tree and shrub species and characteristics of each species. Knowledge of tree bio-mechanics and advanced rigging techniques Knowledge of proper pruning practices including large shade trees and ornamentals. Knowledge of chain saw safety and operation. Adept in tree climbing techniques & bucket truck operation. Knowledge of ANSI A300 and safety standards. Perform quality workmanship and quality control with customer care attitude. Valid Driver's License, CDL license preferred Benefits $32 to $40 per hour based on experience. Health and Dental Insurance with company contribution, 401k retirement savings plan, Paid vacation and holidays, continuing education and training opportunities.

The Middlesex Corporation is a nationally recognized and award-winning leader in the heavy civil construction industry. Since 1972, the family business founded by Robert W. Pereira has developed an extensive client and project list through its consistent efforts to safely build America's infrastructure. The Middlesex Corporation specializes in building and reconstructing highways, bridges, marine, rail, and transit facilities through its collaborative team approach and focus on core values. In addition, Middlesex Asphalt in Central Florida is one of the largest and most productive asphalt plants in the United States, with Middlesex Paving earning an equally solid regional presence and reputation. Position Summary: The Equipment Operator is responsible for the safe and efficient operation of assigned equipment, ensuring compliance with company safety policies and procedures, and performing routine maintenance. Responsibilities: Comply with (and actively promote) all Safety policies and procedures, including reporting all accidents, incidents, and near misses to ensure adherence to our Number One Core Value - Safety, first in everything we do. Complete equipment condition reports and daily checklists for assigned equipment, providing updates to the Project Superintendent daily. Perform regular cleaning of machines, including daily sweeping of cabs, trash removal, weekly interior cleaning, and bi-weekly lubrication of doors and windows. Understand and follow all Company safety policies and procedures, ensuring the safety of both yourself and those working in your vicinity. Monitor and report equipment fuel levels to the Superintendent or Foreman daily to ensure timely refueling. Note any needed supplies or issues with the equipment, such as grease, oil, rags, cleaning supplies, or the need for steam cleaning, and inform the Superintendent. Qualifications: 3-5 years of experience operating equipment in Heavy/Civil Construction. MUST have previous heavy civil construction work experience to be considered for this role. OSHA 10 certification. Necessary Attributes: Adaptability to different personalities and management styles. Strong interpersonal and verbal communication skills. Ability to rely on experience and judgment to plan and accomplish goals. Dedication and hard work with a strong commitment to team success. Strong work ethic, professionalism, and attention to quality in all tasks performed. We offer our full-time and eligible part-time team members a comprehensive benefits package that's among the best in our industry. Benefits include medical, dental, and vision plans covering eligible team members and dependents, employee assistance programs, life insurance, disability, top-tier 401k with matching, tuition reimbursement, industry-leading referral program, and generous paid time off. PIfeb19c36235d-26***********8

SCCC REFERENCE #: 25-86 TITLE: Contingent - Heavy Equipment Operator CAMPUS: Eastern Campus in Riverhead RANK: Civil Service This is a Civil Service contingent position which may lead to permenant. The shift is Monday through Friday 7:00 am - 3:00 pm * Able to operate multiple heavy machines including: * front end loader able to carry two cubic yards or larger; * 10-wheel dump truck to haul sand, gravel, tools or equipment and displace or unload sand, gravel and materials while in motion or still; * Back hoes for digging trenches * roll offs and rollers for leveling dirt * small bulldozers (72 hp and below) for moving dirt and difgging * tank testing equipment * line paint machines * large flatbed truck for transporting heavy equipment * tractor trailers * sewer maintenance combination high presssure jet and vacuum cleaner * street sweepers * snow blowers * small tracked vehciles with special blades for digging and clearing drainage ditches * Competent in: * checking working connditions of equipment and provides routine service and maintenance * supervising work of lower level employees MINIMUM QUALIFICATIONS: Either: a) completion of six school grades, and one year of experience in the operation of heavy automotive equipment; or b) one year of experience as a Automotive Equipment Operator Must posess a CDL license issued by the New York State Department of Otor Vehicles. License must be maintained throughout employment in this position HIRING SALARY: All Heavy Equipment Operator employees are considered essential employees and must respond to the college during emergency situations (weather, county declarations etc.) * As per the Association of Municipal Employees (AME) contract, the starting annual salary is $37,793. (Grade 13). Position is eligible for medical benefits as offered by the College. * Salary in accordance with Suffolk County civil service and AME contract and is non-negotiable. NON-DISCRIMINATION NOTICE: Suffolk County Community College does not discriminate on the basis of race, color, religion, creed, sex, age, marital status, gender identity or expression, sexual orientation, familial status, pregnancy, predisposing genetic characteristics, equal pay compensation-sex, national origin, military or veteran status, domestic violence victim status, criminal conviction or disability in its admissions, programs and activities, or employment. This applies to all employees, students, applicants or other members of the College community (including, but not limited to, vendors and visitors). Grievance procedures are available to interested persons by contacting either of the Civil Rights Compliance Officers/Coordinators listed below. Retaliation against a person who files a complaint, serves as a witness, or assists or participates in the investigation of a complaint in any manner is strictly prohibited. The following persons have been designated to handle inquiries regarding the College's non-discrimination polices: Civil Rights Compliance Officers Christina Vargas Chief Diversity Officer/Title IX Coordinator Ammerman Campus, NFL Bldg., Suite 230 533 College Road, Selden, New York 11784-2899 *********************** ************** or Dionne Walker-Belgrave Affirmative Action Officer/Deputy Title IX Coordinator Ammerman Campus, NFL Bldg., Suite 230 533 College Road, Selden, New York 11784-2899 *********************** ************** In an emergency, contact Public Safety to make a report 24 hours a day/7 days a week by calling ************** or dialing 311 from any College phone. Inquiries or complaints concerning alleged civil rights violations in the College's education admissions, programs and activities may also be directed to: Office for Civil Rights (OCR) - Enforcement Office U.S. Department of Education 32 Old Slip, 26th Floor New York, NY 10005-2500 Telephone: ************** Fax: ************** TDD: ************** Email: ****************** Also see: **************************************************** Inquiries or complaints concerning discrimination in employment practices may also be directed to: NYS Division of Human Rights Long Island (Suffolk) New York State Office Building 250 Veterans Memorial Highway, Suite 2B-49 Hauppauge, NY 11788 Telephone: ************** TDD: ************** Email: ************************* Also see: ************************************* U.S. Equal Employment Opportunity Commission (EEOC) New York District Office 33 Whitehall Street, 5th Floor New York, NY 10004 Telephone: ************** Fax: ************** TTY: ************** ASL Video Phone: ************** Also see: ********************************************* Suffolk County Community College is committed to fostering a diverse community of outstanding faculty, staff, and students, as well as ensuring equal opportunity and non-discrimination in employment, education, access to services, programs, and activities, including career and technical education opportunities. A copy of the postsecondary career and technical education courses offered by the College is available and may be obtained on our website at: ***************************************************** or by calling the Office of Admissions at ************ to request a mailing. APPLY TO: Interested applicants should apply online by clicking on the button below:

READ CAREFULLY BEFORE APPLYING - SERIOUS DRIVERS ONLY This opportunity is NOT for beginners, job-hoppers, or “I think I'm a truck driver” types. If you've had failed drug tests, can't keep paperwork clean, or don't know how to run OTR, do not apply. If you're a real, professional CDL-A driver who knows how to make money with a clean MC - we need to talk to you. 🔹 WHO THIS IS FOR ✔️ 2+ years CDL-A experience ✔️ Clean driving record (no major violations) ✔️ NO failed drug tests - ever ✔️ Must run OTR - all 48 states ✔️ Must be able to base out of / get to Chicago or Midwest ✔️ Business-minded, reliable, and consistent 🔹 LEASE SETUP Reefer unit 75/25 split (you keep 75%) Weekly truck payment: $1,499 Driver pays fuel & tolls Clean, active MC = easy freight Run where the money is - no babysitting 💰 REAL MONEY (AFTER ALL EXPENSES) 🔹 Average Weekly Gross $8,500 - $10,000+ (7-day week) 🔹 Real NET Take-Home $2,800 - $3,000/week on conservative weeks $3,500 - $3,600+/week when running strong 👉 These numbers are AFTER: ✔️ Truck payment ✔️ Fuel ✔️ Tolls & normal road expenses ⚠️ IMPORTANT This is a professional operation If you need hand-holding, excuses, or constant direction - this isn't for you If you know how to run, manage time, and treat trucking like a business - you'll do very well 🚀 MORE OPPORTUNITIES AVAILABLE This position is just to get you started. Additional equipment and opportunities are available for drivers who prove themselves. 📲 Serious inquiries only. If you're the real deal, reach out.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customers' needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.). Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Pay is $25.75- $29.98 per hour Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Work Schedule First Shift (Days) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Loud Noises (Equipment/Machinery), Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Standing for full shift, Strong Odors (chemical, lubricants, biological products etc.), Warehouse 1st Shift - 07:00am-03:30pm Pay Range: $24-$26 As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information Clinical Labeling Services, part of the Clinical Trials Division, located in Bohemia, New York provides leading clinical label design, production, and management services for the pharmaceutical and biotechnology industry. Our advanced inspection software, full in-house variable and non-variable print capabilities, and proprietary translation and regulatory approval system are designed to reduce overall clinical trial label cycle times. How Will You Make an Impact?: The Equipment Operator plays a crucial part in ensuring smooth clinical label manufacturing processes within a team that is dynamic and fast-paced, relying on teamwork, multitasking, and communication. They are responsible for operating and maintaining equipment used in the production of clinical trial study labels directly impacting the efficiency and quality of the manufacturing processes. A Day in the Life: Manufactures a wide array of label constructions using automated inkjet equipment following client-approved proofs and associated documentation to manufacture labels per established specifications. Sets up computerization production runs and bulk transfer labels using the proprietary software application CLPS, as per department Standard Operating Procedures (SOPs) and Work Instructions (WIs) while monitoring all label production processing for accuracy and completeness by applying current Good Manufacturing Practices (cGMPs) in all areas of responsibility safely and efficiently. Works independently in planning, setting up, and manufacturing a wide array of label constructions that meet client specifications while all equipment in the area of responsibility is maintained as per standard procedures and safety guidelines including keeping up with all current preventative maintenance practices and cleaning daily. Education: High school diploma or equivalent required! Experience: Required: Minimum of 2 years of work experience in a manufacturing, operations, production, lab setting or related field Preferred: Experience in a cGMP environment Knowledge, Skills, Abilities: Technical Skills: Printing or manufacturing experience with proficiency in computer operations of transferring data, MS excel and outlook, file management, are required. Mechanically inclined with the ability to accurately read measurements, troubleshoot issues and identify potential solutions associated with various label constructions; skills in performing roll splicing using manual equipment, and operating computerized digital inkjet equipment. Detail-oriented and the ability to work in an organized manner. Must be capable of handling confidential information and communicating in a professional manner with internal customers. Physical Requirements / Work Environment Uses Personal Protective Equipment (PPE), and must be able to stand and move about including reaching, bending, stooping, grasping and understand chemical hygiene. Uses hand tools and equipment including forceful gripping, grasping, pushing, and pulling. Must lift and maneuver materials weighing up to 50 pounds maximum unassisted. What We Offer Compensation Competitive Hourly Pay Rate. Additional shift differential for 2nd shift and 3rd shift positions. Annual performance-based bonus. Annual merit performance-based increase. Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1. Paid Time Off & Designated Paid Holidays Retirement Savings Plan Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities Additional Job Description Compensation and Benefits The hourly pay range estimated for this position based in New York is $17.85-$26.77. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************