Equipment operator jobs in South Gate, CA

Details: This role operates one or more types of heavy equipment including excavators, dozers, backhoes, compactors, articulated dump trucks, and front end loaders to support earth moving activities at environmental remediation sites. Equipment may utilize CAT or John Deere control configurations. The position also performs routine inspections and minor maintenance or repairs to ensure safe and reliable operation. Primary Responsibilities: Safely and efficiently operate assigned heavy equipment with precision, coordination, and strong situational awareness. Maintain sustained focus while operating equipment for extended periods, consistently adhering to safety standards and jobsite protocols. Demonstrate working knowledge of equipment capabilities and limitations including load weight restrictions to prevent overloading or destabilization of machinery. Details: Qualifications 4+ years of work experience on civil projects 5+ years of experience working as an equipment operator Proven experience operating excavators, bulldozers, backhoes, compactors, articulated dump trucks, and front end loaders. High school diploma or general education degree (GED). Current 40-Hour HAZWOPER and 8-Hour HAZWOPER Refresher (preferred) Trained and certified to operate the assigned equipment Ability to read grading plans and cut and fill stakes. Ability to travel to local project sites. Ability to adapt to changing conditions Pay rate: $35-$43/hr DOE

Since 1996, Boudreau Pipeline Corporation continues to be Southern California's premier pipeline company that provides quality solutions and installations for wet utilities including sewer, water, storm drain systems and fire lines. We specialize in both conventional and highly complex pipeline projects for leading commercial, industrial and residential builders, municipalities, utilities and contractors. As a proud partner with the Laborers' Union, we continue to provide the best support to our team of employees, their families and our community. Surveyed as a Top Workplace for the 8th year in a row by our Employees, we continue to provide superior on-the-job training, career advancement, safety and a dynamic company culture while practicing our Guiding Principles; Mutual Respect, Accountability and Responsibility. Come join our family, We Dig Your Future!™ Currently offering sign-on bonuses for qualified candidates! **Must have WET UTILITIES experience (dry utilities, oil, & gas will not be considered)** Responsibilities Operates heavy equipment of various sizes and weights used in road, site or highway construction and paving Operates heavy equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life Performs daily safety and maintenance checks Cleans heavy equipment as scheduled and/or required Maintains the equipment and advise supervisor of any requirement for maintenance or repairs Maneuver heavy equipment into loading or unloading positions, following signals from loading crew as needed; check that the vehicle position is correct and any special loading equipment is properly positioned. Ensure a sound understanding of the issues involving ground disturbance Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade. Use various pieces of equipment to perform fine grading and finishing, sloping and banking, backfilling, demolition, ditching, loading, excavating and stockpiling. Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade Ensures a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task Properly follows all company policies and OSHA/MSHA regulations for safe working procedures and environment Reports any problems to your immediate supervisor Signals operators of construction equipment to facilitate alignment, movement, and materials with shovel Follows direction of Foreman as to daily tasks and expectations for each specific project or jobsite May be called upon to run small power tools such as jack hammer Digs, spreads, and levels construction materials Lifts, carries and holds material, tools and supplies Maintains regular and predictable attendance at assigned times is required Other duties as assigned Safety Responsible for ensuring OSHA standards and company safety policies are complied with at all times including but not limited to operation of tools, equipment and machinery Corrects unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately Qualifications Considerable knowledge of equipment operations and construction and maintenance procedures Must possess a working knowledge of grades and blueprints Skill in operation of assigned equipment Ability to follow verbal and written instructions. Ability to establish effective working relationships with other employees and general public Pay Range: $30.00 - $45.00/hr based on experience.

Demo/Grading - Heavy Equipment Operator - Track Loader $30-$42/Hourly+, DOE Benefits, Paid Holidays, Vacation Time, 401K, etc... Full-Time, Non-Exempt, Mon-Fri work Schedule, some Saturdays Since the company's birth, in 1981, Tight Quarters, Inc. has provided quality assistance to the world of demolition, grading, and concrete cutting and breaking for commercial, residential and industrial communities throughout greater Southern California. Requirements: Experience operating excavator with thumb both full-size excavator, mini-excavator, skid steer, Bobcat compact track loaders, and large track loaders like the CAT 953 and 973. Ability to read and understand grading plans. Experience working in demolition of residential and commercial structures. Meet schedules and timelines. Ability to work safely, productively, and efficiently. Experience in demolition. Understand and follow oral and written instructions. Work cooperatively and collaboratively with other team members. Maintain punctual and consistent attendance. Must be able to work overtime when required. Must have hard working attitude. Experience: Heavy equipment operation: 3 years (Required) Grading operator: 2 years (Required) License/Certification: California Driver License (Required) Benefits: 401(k) + matching Health insurance Dental insurance Vision insurance Paid Time Off Holiday Pay WHY WORK AT TIGHT QUARTERS?: Stability - We've been in business for over 40 years! Exceptional Work Culture - We stay true to our Core Values! Training and Development Opportunities! Tight Quarters Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Tight Quarters complies with applicable state and local laws governing nondiscrimination in employment.

Burrtec is a well-established refuse and recycling collection company serving over fifteen municipalities throughout Southern California and employing over 1400 full time employees. Burrtec continues to grow through co. acquisitions and successful bid proposals. Burrtec is a family-owned company that firmly believes the key element to our success is knowing how important each employee is in the organization. We are currently looking to fill an Equipment Operator I position for the MRF at the Agua Mansa/Riverside location. The Equipment Operator handles a combination of any of the following equipment relating to the recovery of material: forklift, baler, wheel loader, sortline. SALARY RANGE: $25.65/hour - $26.15/hour ESSENTIAL DUTIES: Operate a combination of any of the following equipment: Forklift for movement of recycled materials Sortline panel controls (may provide guidance to sorters) Baler to prepare material for shipment Wheel loader to load sorting line conveyor Inspect equipment daily and report unsafe conditions Stop operation of any malfunctioning equipment Follow safe work practices and adhere to safety rules. Perform minor servicing and maintenance of equipment Perform other duties as assigned by Supervisor KNOWLEGE, SKILLS, AND ABILITIES: Good judgment skills and ability to recognize equipment problems. Ability to communicate in English. TRAINING AND EXPERIENCE: Valid California Driver's License and clean driving record, required Previous forklift experience and familiarity with the operation of various powered equipment is desirable. PHYSICAL: Ability to operate forklift, loader, baler, bobcat and sortline equipment. Be able to lift up to 50 lbs. WORKING CONDITIONS: Will be exposed to moderate noise and dust levels. Will be exposed to outdoor weather conditions (heat, rain, wind, snow, fog). We provide competitive salary commensurate upon experience, and EXCELLENT Benefits package including 401K and 100% paid medical/dental/life insurance and holidays/vacations/PSL.

This role operates one or more types of heavy equipment including excavators, dozers, backhoes, compactors, articulated dump trucks, and front end loaders to support earth moving activities at environmental remediation sites. Equipment may utilize CAT or John Deere control configurations. The position also performs routine inspections and minor maintenance or repairs to ensure safe and reliable operation. Primary Responsibilities: Safely and efficiently operate assigned heavy equipment with precision, coordination, and strong situational awareness. Maintain sustained focus while operating equipment for extended periods, consistently adhering to safety standards and jobsite protocols. Demonstrate working knowledge of equipment capabilities and limitations including load weight restrictions to prevent overloading or destabilization of machinery.

We are seeking a highly skilled and experienced Equipment Operator to join our team. The ideal candidate will be responsible for operating a variety of heavy equipment and machinery to support the construction, maintenance, and operations of our facilities and projects. This role requires a strong foundation in equipment operation, a keen eye for safety, and a commitment to meeting deadlines and project goals. Duties Excavations/trenching inside closed landfills for landfill gas collections and leachate systems is a plus. Must be flexible and willing to work overtime as needed. * Ensures equipment is in good working order, at all times. * Must possess skill, coordination, and awareness to operate heavy equipment in a safe manner with precision and efficiency. * Able to slope or bench an excavation. * Able to read and understand cut and fill stakes in order to align and position equipment appropriately. * Willingness to operate heavy equipment for long periods with continuous attention to detail and safety. * Observe and follow all applicable safety requirements. * Maintain consistent communication among field crew members by use of hand signals or radio to align and position heavy equipment properly. * Confirm necessary precautions have been taken to ensure no conflicts exist with both above and below-ground utilities. * All other duties as assigned by the Superintendent Skills A positive attitude and willingness to take direction. * Ability to communicate in English * Understanding proper safety procedures and recognizing hazards * Ability to understand Plans as they relate to trenching, excavation, and grading. * Knowledge of U.S.A. marks * Must be a team player and create a positive environment * Must be a self-starter and a go-getter * Ability to check grade and verify elevations using a laser, is a plus. * Ability to lead the day-to-day activities of a small crew, is a plus. * Must be flexible and willing to work overtime as needed, including weekends. License/Certification: * Driver's License (Preferred) Ability to Commute: * Oakland, CA (Required)

The main office is in Orange, and the driver's office location is in Paramount, CA. Work will be in the Long Beach, Carson, and Torrance areas. Job Description: We are seeking a reliable and experienced Class A CDL Driver to join our team. In this role, you will be responsible for safely operating a commercial vehicle to transport to various locations, ensuring timely and accurate deliveries. You will work independently and collaborate with the operations team to ensure that schedules and safety standards are met. Requirements: Tanker and Hazmat Endorsements Required or able to obtain in 30 days. Responsibilities: Safely operate a Class A commercial vehicle, adhering to all traffic laws and company policies. Transport freight to designated destinations in a timely manner. Perform pre-trip and post-trip vehicle inspections to ensure safety and proper functioning. Maintain accurate delivery logs, including mileage, fuel use, and delivery details. Load and unload cargo when necessary, securing the load for safe transportation. Follow all safety procedures and industry regulations, including DOT rules. Communicate effectively with dispatchers and management regarding route changes, delays, or issues. Maintain cleanliness and organization of the vehicle. Assist with minor vehicle maintenance as needed. Qualifications: Valid Class A CDL with a clean driving record. Ability to lift and move heavy items when necessary. Strong attention to detail and safety protocols. Excellent communication skills. Ability to work independently and follow schedules. Knowledge of GPS and basic route planning tools. Physical Requirements: Ability to sit for extended periods while driving. Good vision and hearing to operate a vehicle safely. *Must be able to pass a physical and drug test. * Salary determined upon experience. View all jobs at this company

This position description is subject to change at any time as needed to meet the requirements of the program or company. Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. As a Licensed Heavy Equipment Operator Journeyman, you will be responsible for the safe and efficient operation of heavy machinery used in the construction, excavation, demolition, and installation of systems. Position will be located at Los Angeles SFB. This position is contingent upon successful contract award to V2X. Responsibilities Major Job Activities: + Provides OSP services requiring trenching, loaders, dump trucks, etc. + Performs tasks involving physical labor at installation sites to aid daily operations. + Performs site preparation and implementation activities required to implement approved OSP solution. + Operates hand and power tools of all types, including air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. + Prepares sites; digs trenches; sets braces to support the sides of excavations; erects scaffolding; and cleans up rubble, debris, and other waste materials. + Assists in restoration activities to return site to previous condition before project work. Material & Equipment Directly Used: Proficient with MS Office Suite (Word, Excel, PowerPoint, Visio) and heavy equipment. Working Environment: Outside environment with potential to support austere locations. Physical Activities: Must be able to lift / carry 100 lbs. Qualifications Education / Certifications: + High School diploma Experience / Skills: + 5 Years + Professional operator's license for heavy machinery. Skills & Technology Used: + Various heavy machinery equipment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.

RBC BEARINGS CAREERS RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Position Summary: Under general supervision, operates the Gundrill equipment of metal parts to print specifications. Performs required quality workmanship through the use of precision measuring instruments, uses SPC charts & graphs and special test equipment. Follows scheduled workflow assignments in order to meet customer demands and production control requirements. Works towards meeting established standards and performance requirements. Key Position Responsibilities: · The duties and responsibilities include, but are not limited to the following: Machines metal parts to print specifications and established performance standards. · Performs quality workmanship through the use of precision measuring instruments. · Refers to drawings, engineering prints and written instructions to machine products to customer / engineering specifications. · Follows scheduled workflow according to assigned priorities and communicates deviations to department lead. · Works toward increased performance and makes adjustments to equipment and set-ups as needed. · Insures that all materials are available prior to initiating production and communicates shortages to department lead. · Conforms to written instructions and procedures to achieve increased performance in production and quality workmanship. · Monitors equipment maintenance and adheres to safety regulations. · Must be willing to work overtime as needed. · Performs other duties as assigned or necessitated by change or condition. Essential Qualifications, Skills, and Experience · High School Diploma or equivalent GED; one year experience post high school machining or related coursework. · Knowledge of tooling and precision set-ups with consistent quality results. · Knowledge of precision measuring instruments. · Knowledge of machinery speeds and feeds utilizing a variety of high strength materials. · Ability to read prints and engineering drawings. · Ability to read, work and follow instructions in English. · Ability to perform machining on a variety of high strength materials. Desired Qualifications, Skills, and Experience: · Experience in an Aerospace manufacturing environment preferred. ITAR Requirement: - Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. Quality Requirement: - Employees will participate as required in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100C and/or ISO-9001:2009 requirements. Physical Requirements/Working Conditions: - This is primarily a position that requires employees to stand for 8 hours and machine production parts. This position requires lifting parts up to 30 lbs unassisted and the employee must often bend and reach to load materials on equipment. The employee also moves throughout the building to collect, deliver, and handle production parts. Employer's Statement: - This does not list all of the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this . - The company reserves the right to change, rescind, add or delete the duties and responsibilities of positions within this job classification at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. We offer competitive compensation and excellent benefits including Medical, Dental, and a company matched 401k plan. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18 to $23/hour RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Job Type: Full-time Pay: $18.00 - $23.00 per hour Benefits: 401(k) matching Dental insurance Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Vision insurance Schedule: 8 hour shift Day shift Overtime Weekends as needed Ability to Commute: Torrance, CA 90502 (Required) Ability to Relocate: Torrance, CA 90502: Relocate before starting work (Required) Work Location: In person

HEAVY CONSTRUCTION EQUIPMENT OPERATOR Heavy Construction Equipment Operator I Facilities Services Salary Range: $3,736 - $$5,232/Monthly (Budgeted Hiring Salary Range $4,044- $4,833/Monthly) Work Schedule: Full-Time, Monday - Friday, 300 a.m. to 11:30 a.m.; non-exempt classification. Essential Functions: Heavy Construction Equipment Operators operate very heavy trucks, tractor-trucks and heavy construction equipment which can be operated only by a highly skilled operator. Heavy equipment include large track-type tractors (Cat D-6 or larger), large-earth-moving equipment, motor graders, cranes, heisters, large loaders (usually over 1 ½ cubic yard capacity), forklifts (including 2 ½ ton capacity), trenching machines (over 30" depth), large backhoes, large bulldozers, asphalt paving machines, large rollers (eight ton and over) used for improvement of campus roads, parking lots, building site preparation, etc., and operate large tow trucks, tractor semi-trailer combinations such as those used for hauling extremely heavy machinery, equipment, and other materials. Required Qualifications & Experience: Must possess a valid California Driver's license; be licensed appropriately for each vehicle operated and may be required by the California Vehicle Code to carry appropriate certification while driving. Equivalent to one year of heavy equipment operation, including regular or intermittent operation of vehicles, preferably related to heavy construction such as large track-type tractors, large tow trucks, tractor semitrailer combinations, bulldozers, or land planes and involving routine service and minor maintenance of the vehicles operated. Incumbent is required to have knowledge of the rules of safe driving and the provisions of the State of California Vehicle Code pertaining to operation of vehicles described in the classification; knowledge of State and California General Industrial Safety orders related to the assigned tasks of the classification, particularly those related to vehicle and equipment operation, construction methods and practices, and the lifting and moving of heavy loads. Ability to: operate assigned equipment safely; recognize safety hazards and follow practices and laws to insure safety; follow manuals and guidelines pertaining to operation of State vehicles; load and unload vehicles correctly and safely; follow oral and written instructions; read and write at a level appropriate to the duties of the position; establish and maintain cooperative working relationships with other people; service and make routine repairs of equipment operated; and perform manual labor by the duties of the position. Must possess a valid California Driver's license; be licensed appropriately for each vehicle operated and may be required by the California Vehicle Code to carry appropriate certification while driving. The incumbent must have a demonstrated interest and/or ability in working in a multicultural/multiethnic environment. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with the CSU. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who may apply for the position. California State University, Los Angeles, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Desired Qualifications: Bachelor's degree from an accredited four-year college or university in a related field. Experience in a higher education, unionized institution. Work coordination and/or lead responsibilities with notable accountability for the work results of other support staff is preferred. Working knowledge of PeopleSoft. Closing Date: Review of applications will begin on November 6, 2025, and will continue until the position is filled; however, the position may close when an adequate number of qualified applications are received. A COMPLETED ON-LINE CAL STATE LA EMPLOYMENT APPLICATION IS REQUIRED. RESUMES WILL NOT BE ACCEPTED IN LIEU OF A COMPLETED APPLICATION. Please upload a copy of your valid CA Driver's license to the application. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 revised July 21, 2017, as a condition of employment. In addition to meeting fully its obligations under federal and state law, California State University, Los Angeles is committed to creating a community in which a diverse population can live and work in an atmosphere of tolerance, civility and respect for the rights and sensibilities of each individual. To that end, all qualified individuals will receive equal consideration without regard to economic status, race, ethnicity, color, religion, disability, national origin or cultural background, political views, sex or sexual orientation, gender, or other personal characteristics or beliefs. Candidates must demonstrate ability and/or interest in working in a multicultural/multiethnic environment. Certain positions require fingerprinting. The University actively encourages qualified minorities, women and persons with a disability to apply. Upon request, reasonable accommodation will be provided to individuals with protected disabilities to (a) complete the employment process and (b) perform essential job functions when this does not cause an undue hardship. We are an Equal Opportunity/Title IX Employer. To obtain employment information for the impaired call: TDD Line ************** 24-hour Dial-A-Job Line **************

Job Description Summit Anaheim currently has an open position for Drill Operator (2nd shift). Summit Interconnect is a manufacturer of advanced technology printed circuit boards with a specific focus on complex rigid and rigid-flex product with unique expertise in RF/Microwave applications. Position Summary: Under general supervision operates two or more numerically controlled machines simultaneously to drill low tolerance holes in panels. Independently performs complex and standard machine setups involving loading NC programs, aligning the pinning of the panels, visually and mechanically inspecting the panels, and making the required adjustments. Perform the necessary tasks to keep multiple machines at or near capacity output levels. Qualifications: To perform this job successfully, an individual must have a minimum of one (1) year experience in the printed circuit industry and must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: Select drills from planning sheet call out. Set up drilling machine and make work zero corrections from the 4-point x-rays. Operate more than one drill when conditions permit. Help others when time allows. Remove broken drills and fix shallow drilled holes. Clean the drill equipment and work area. Log in and out of the Proms computer. Empty trashcans and put in proper recycle bin. Job Requirements: High school diploma or equivalent. Minimum one (1) year experience in the printed circuit industry, in Drilling. Understanding of industry standards and appropriate application. Must be able to cooperate and communicate effectively with management and supervisory staff. Ability to effectively follow company systems and procedures. Must be able to work with little supervision. Strong knowledge in military and rigid flex boards. Computer skills required. Physical Requirements: Must be able to sit and/or stand for long periods of time. Must be able to lift up to 50 lbs. Compensation/Benefits: Summit offers a variety of health and benefit programs. Which include Medical, Dental, Vision, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401K, and Paid Holidays. Benefits are effective 1st day of the month following date of hire. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

Job DescriptionAbout Us Winonics is a trusted leader in advanced PCB manufacturing, built on teamwork, innovation, and continuous improvement. Our culture empowers every team member to contribute, learn, and grow in a supportive, hands-on environment. We're committed to quality, precision, and the success of every individual who helps drive our mission forward. About the Role We are seeking a CNC Drill/Router Operator. This role is responsible for setting up, operating, and maintaining CNC drilling and routing equipment to support the production of high-reliability printed circuit boards. The operator ensures accuracy, quality, and compliance with customer specifications and safety standards. Duties & Responsibilities Set up, operate, and maintain CNC drilling and routing machines Download and run CNC programs as specified in traveler instructions Perform drilling operations, including double-sided, multilayer, counterbore, countersink, and controlled-depth drilling Operate optimization and x-ray equipment to verify panel alignment and registration Inspect new and re-sharpened drill bits for quality and readiness Conduct in-process inspections to confirm counts, measurements, and product quality Enter production data accurately into the manufacturing control system Complete required departmental documentation and reports Maintain a safe, clean, and organized work environment following all PPE and chemical handling requirements Collaborate with production and engineering teams to support product flow, quality improvements, and process testing Job Qualifications High school diploma or equivalent required Previous CNC drilling, routing, or PCB manufacturing experience preferred Ability to read and interpret travelers, blueprints, and technical instructions Basic computer proficiency for logging and tracking production data Strong attention to detail, manual dexterity, and visual accuracy Effective verbal and written communication skills Ability to follow instructions and work independently or in a team environment Comfortable working safely in and around chemicals Flexibility to work overtime and weekends as needed Hourly Pay: $19 - $24 per hour Compensation is based on relevant experience, education, certifications, and specialized skills. Benefits Winonics provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability, provides paid time off and paid holidays. Opportunities for professional development and career advancement. Why Join Winonics? At Winonics, we invest in both cutting-edge technology and our employees' professional growth. If you're looking for a role where you can make an impact, collaborate with top industry professionals, and be part of a company committed to excellence, we'd love to hear from you! ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Applicants must be U.S. citizens or lawful permanent residents. Equal Opportunity Employer Winonics provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic. All employment offers at Winonics are contingent upon the successful completion of a background check and pre-employment drug screening. Winonics is a drug-free workplace and complies with all applicable federal, state, and local laws regarding background investigations and substance testing.

RBC BEARINGS CAREERS RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Position Summary: Under general supervision, operates the Gundrill equipment of metal parts to print specifications. Performs required quality workmanship through the use of precision measuring instruments, uses SPC charts & graphs and special test equipment. Follows scheduled workflow assignments in order to meet customer demands and production control requirements. Works towards meeting established standards and performance requirements. Key Position Responsibilities: · The duties and responsibilities include, but are not limited to the following: Machines metal parts to print specifications and established performance standards. · Performs quality workmanship through the use of precision measuring instruments. · Refers to drawings, engineering prints and written instructions to machine products to customer / engineering specifications. · Follows scheduled workflow according to assigned priorities and communicates deviations to department lead. · Works toward increased performance and makes adjustments to equipment and set-ups as needed. · Insures that all materials are available prior to initiating production and communicates shortages to department lead. · Conforms to written instructions and procedures to achieve increased performance in production and quality workmanship. · Monitors equipment maintenance and adheres to safety regulations. · Must be willing to work overtime as needed. · Performs other duties as assigned or necessitated by change or condition. Essential Qualifications, Skills, and Experience · High School Diploma or equivalent GED; one year experience post high school machining or related coursework. · Knowledge of tooling and precision set-ups with consistent quality results. · Knowledge of precision measuring instruments. · Knowledge of machinery speeds and feeds utilizing a variety of high strength materials. · Ability to read prints and engineering drawings. · Ability to read, work and follow instructions in English. · Ability to perform machining on a variety of high strength materials. Desired Qualifications, Skills, and Experience: · Experience in an Aerospace manufacturing environment preferred. ITAR Requirement: - Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. Quality Requirement: - Employees will participate as required in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100C and/or ISO-9001:2009 requirements. Physical Requirements/Working Conditions: - This is primarily a position that requires employees to stand for 8 hours and machine production parts. This position requires lifting parts up to 30 lbs unassisted and the employee must often bend and reach to load materials on equipment. The employee also moves throughout the building to collect, deliver, and handle production parts. Employer's Statement: - This does not list all of the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this . - The company reserves the right to change, rescind, add or delete the duties and responsibilities of positions within this job classification at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. We offer competitive compensation and excellent benefits including Medical, Dental, and a company matched 401k plan. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18 to $23/hour RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Job Type: Full-time Pay: $18.00 - $23.00 per hour Benefits: 401(k) matching Dental insurance Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Referral program Vision insurance Schedule: 8 hour shift Day shift Overtime Weekends as needed Ability to Commute: Torrance, CA 90502 (Required) Ability to Relocate: Torrance, CA 90502: Relocate after starting work (Required) Work Location: In person

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Drill Operator to join our growing company. The Drill Operator uses Computer Numerical Control (CNC) equipment to drill high-precision holes into rigid and rigid-flex multilayer printed circuit boards (PCBs) (a flat laminated substrate consisting of an epoxy base laminate with multiple very thin copper layers). Drill holes range in size and can be as small as 0.005” in diameter. This position is ideal for a motivated individual who is reliable and has a keen eye for detail. As an operator, you will handle tasks related to machine setup, product quality, and maintaining a safe and clean work environment. Essential Job Function: Perform job related tasks as instructed by supervisor. Maintain a clean, safe, and organized work environment. Assist on removal of copper flash from panels edges. Visually inspect panels for surface defects. Read and understand applicable Process Procedures and safety rules. Set up, load, unload and operate CNC drill machines with minimal supervision. Load, unload and set up appropriate drill cassettes according to traveler drill sizes. Drill F/A (First Article) panel and make appropriate table adjustments. Verify internal hole registration and annular ring using the X-Ray machine. Maximize productivity by maintaining drill machines active. Discontinue processing when a non-conforming condition is found and report it to management. Perform all tasks and routine maintenance as required by Process Procedure. Accurately complete all departmental, quality and lot tracking documentation. Assist other operators when time allows. Collaborate with management/ shift supervisor to ensure appropriate personnel are scheduled to meet the departmental goals while minimizing overtime. Actively seek process improvement activities to enhance manufacturing capabilities. Maintain drill inventory. Evaluate new technologies, materials, and techniques. Support and implement company policy and procedures. Assist in training assigned personnel. Schedule Preventive Maintenance for departmental equipment Perform additional tasks as assigned by management. Work Schedule: This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is 2nd Shift | Monday night through Saturday morning, 3:00 pm to 11:30 am. Requirements: Essential Qualifications, Education and Experience: High School Diploma or Equivalent Minimum of 3 years' experience in printed circuit board CNC drilling. Minimum of 3 years' experience and knowledge of PCB drilling. Preferred Additional Skills: Excellent organizational and leadership skills. Strong knowledge of complex board manufacturing including but not limited to, military rigid and rigid-flex board manufacturing. Understanding of industry standards and specifications (IPC). Able to effectively communicate with management and supervisory staff. Proficient computer skills with the ability to learn new software. Able to support and implement company safety protocols. Physical Requirements: Able to lift to 25lbs. Ability to stand/walk throughout an 8-10-hour shift. Ability to walk on uneven surface. Compensation: California Pay Range: $19.00 - $24.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. About AdvancedPCB AdvancedPCB, with over 40 years of experience, is a leading manufacturer of high-reliability printed circuit boards. The company features six manufacturing sites: Aurora, Colorado, our headquarters, Santa Clara, two in Southern California, Maple Grove, Minnesota, and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Advanced PCB offers Medical, Dental, Vision Insurance as well as 401K. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us! **********************************

The Loader Operator I is responsible for operating heavy equipment and trucks, setting up equipment for auction in yards and helping customers during and after auctions. Responsibilities Responsible for operating all types of heavy equipment and trucks. Accountable for helping to set up equipment in the yard for auctions. Help customers load their equipment purchases, and answer their questions related to the yard. Actively support the RB Unreserved Commitment to Safety: to send everyone home, every day, the way they came to work, by taking personal responsibility for your safety and safety of your team, co-workers and customers. Perform other duties as assigned. Qualifications Experience operating heavy machinery. Able to operate a large 36,000 lbs forklift is an asset. Good spoken and written English is required. Good computer skills and able to learn new programs quickly. A track-record of working safely, and helping others work safely, too. You must be able to relate well with customers and team members. You like to work in a team, helping out wherever needed; but you can also self-start and work on your own. Organized, and can handle lots of multiple tasks at once. A high level of attention to detail.

Fuel Loader - Transload Operator Job Type: Full-time, non-exempt, hourly Shift(s): 12 hour shifts Schedule: Night shift: Saturday to Tuesday 4 p.m. to 4 a.m. Pay: $23-$25/hour, based on experience Pay dates: Weekly, on Fridays MHX, LLC is looking for a self-motivated, skilled, and safety-conscious Fuel Loader to join our team in Fontana, CA. The Fuel Loader loads fuel onto trucks and other vehicles safely and efficiently. This is a crucial position in our operations. The work is performed in an industrial yard environment. The ideal candidate is mechanically inclined with basic mechanical knowledge of pumps and valve operations and has prior fuel loading experience. Jump start your career at MHX, a company that values integrity, intelligence, and attention to detail. The successful candidate will receive approximately one month of on-the-job training, during the day shift, with experienced managers and is then willing to work the night shift Saturday to Tuesday 4 p.m. to 4 a.m. Do you take great pride in being to work on time, rain or shine Start a rewarding career at MHX , apply today! About MHX,LLC MHX, LLC, is an established rail transload company headquartered in California with locations in Arizona, Oregon, and Washington. Beyond transportation services, our company is a dynamic supply chain partner for our customers. The MHX, LLC mission revolves around ensuring safety, timeliness, and accuracy in our solutions. To achieve this, our company has identified five core values: The Well Being of People, Integrity, Accuracy, Customer Focus, and Constant Improvement that serve as the foundation of our daily operations. Key Responsibilities Operate fuel loading equipment, including pumps, hoses, and valves, to load fuel onto trucks and other vehicles Maintain accurate records of fuel loading and delivery Follow all safety protocols and procedures to prevent accidents and spills Coordinate with other team members to ensure timely and efficient fuel loading and delivery Communicate effectively with drivers and other personnel to ensure smooth operations Participate in ongoing training to maintain and improve skills Oversee operations and equipment for deviations Address and report hazardous situations, and ensure compliance with our safety and environmental policies and procedures Accountable for accurate movement of refined petroleum products from rail car to tank storage and from tank storage to the truck bays Maintain terminal equipment through the application of preventative maintenance and troubleshooting Perform daily, weekly, monthly, semi-annual, and annual inspections Maintain a high-level of tidiness and organization for terminal grounds and equipment (including terminal truck bays, rail spur and tank farm) Lubricates and repacks valves; lubricates pumps; replaces gaskets and seals; corrects pumping equipment misalignment; cleans strainers and filter; services filter air separators and checks meters for correct delivery and calibration. Maintain physical inventory and other information by computer and when necessary, by climbing and gauging tanks and sampling product. Conduct movement of railcars using a rail mover within the facility. Pay and Benefits Competitive hourly wages Training provided Weekly payroll Overtime available Medical, dental, vision and life insurance benefits Sick, vacation, and holiday pay 401K with company matching

This role operates one or more types of heavy equipment including excavators, dozers, backhoes, compactors, articulated dump trucks, and front end loaders to support earth moving activities at environmental remediation sites. Equipment may utilize CAT or John Deere control configurations. The position also performs routine inspections and minor maintenance or repairs to ensure safe and reliable operation. Primary Responsibilities: Safely and efficiently operate assigned heavy equipment with precision, coordination, and strong situational awareness. Maintain sustained focus while operating equipment for extended periods, consistently adhering to safety standards and jobsite protocols. Demonstrate working knowledge of equipment capabilities and limitations including load weight restrictions to prevent overloading or destabilization of machinery. Qualifications 4+ years of work experience on civil projects 5+ years of experience working as an equipment operator Proven experience operating excavators, bulldozers, backhoes, compactors, articulated dump trucks, and front end loaders. High school diploma or general education degree (GED). Current 40-Hour HAZWOPER and 8-Hour HAZWOPER Refresher (preferred) Trained and certified to operate the assigned equipment Ability to read grading plans and cut and fill stakes. Ability to travel to local project sites. Ability to adapt to changing conditions Pay rate: $35-$43/hr DOE

Since 1996, Boudreau Pipeline Corporation continues to be Southern California's premier pipeline company that provides quality solutions and installations for wet utilities including sewer, water, storm drain systems and fire lines. We specialize in both conventional and highly complex pipeline projects for leading commercial, industrial and residential builders, municipalities, utilities and contractors. As a proud partner with the Laborers' Union, we continue to provide the best support to our team of employees, their families and our community. Surveyed as a Top Workplace for the 8th year in a row by our Employees, we continue to provide superior on-the-job training, career advancement, safety and a dynamic company culture while practicing our Guiding Principles; Mutual Respect, Accountability and Responsibility. Come join our family, We Dig Your Future! Currently offering sign-on bonuses for qualified candidates! Must have WET UTILITIES experience (dry utilities, oil, & gas will not be considered) Responsibilities * Operates heavy equipment of various sizes and weights used in road, site or highway construction and paving * Operates heavy equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life * Performs daily safety and maintenance checks * Cleans heavy equipment as scheduled and/or required * Maintains the equipment and advise supervisor of any requirement for maintenance or repairs * Maneuver heavy equipment into loading or unloading positions, following signals from loading crew as needed; check that the vehicle position is correct and any special loading equipment is properly positioned. * Ensure a sound understanding of the issues involving ground disturbance * Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade. * Use various pieces of equipment to perform fine grading and finishing, sloping and banking, backfilling, demolition, ditching, loading, excavating and stockpiling. * Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade * Ensures a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task * Properly follows all company policies and OSHA/MSHA regulations for safe working procedures and environment * Reports any problems to your immediate supervisor * Signals operators of construction equipment to facilitate alignment, movement, and materials with shovel * Follows direction of Foreman as to daily tasks and expectations for each specific project or jobsite * May be called upon to run small power tools such as jack hammer * Digs, spreads, and levels construction materials * Lifts, carries and holds material, tools and supplies * Maintains regular and predictable attendance at assigned times is required * Other duties as assigned Safety * Responsible for ensuring OSHA standards and company safety policies are complied with at all times including but not limited to operation of tools, equipment and machinery * Corrects unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately Qualifications * Considerable knowledge of equipment operations and construction and maintenance procedures * Must possess a working knowledge of grades and blueprints * Skill in operation of assigned equipment * Ability to follow verbal and written instructions. Ability to establish effective working relationships with other employees and general public Pay Range: $30.00 - $45.00/hr based on experience.

Job Description Demo/Grading - Heavy Equipment Operator - Track Loader $30-$42/Hourly+, DOE Benefits, Paid Holidays, Vacation Time, 401K, etc... Full-Time, Non-Exempt, Mon-Fri work Schedule, some Saturdays Since the company's birth, in 1981, Tight Quarters, Inc. has provided quality assistance to the world of demolition, grading, and concrete cutting and breaking for commercial, residential and industrial communities throughout greater Southern California. Requirements: Experience operating excavator with thumb both full-size excavator, mini-excavator, skid steer, Bobcat compact track loaders, and large track loaders like the CAT 953 and 973. Ability to read and understand grading plans. Experience working in demolition of residential and commercial structures. Meet schedules and timelines. Ability to work safely, productively, and efficiently. Experience in demolition. Understand and follow oral and written instructions. Work cooperatively and collaboratively with other team members. Maintain punctual and consistent attendance. Must be able to work overtime when required. Must have hard working attitude. Experience: Heavy equipment operation: 3 years (Required) Grading operator: 2 years (Required) License/Certification: California Driver License (Required) Benefits: 401(k) + matching Health insurance Dental insurance Vision insurance Paid Time Off Holiday Pay WHY WORK AT TIGHT QUARTERS?: Stability - We've been in business for over 40 years! Exceptional Work Culture - We stay true to our Core Values! Training and Development Opportunities! Tight Quarters Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Tight Quarters complies with applicable state and local laws governing nondiscrimination in employment. Job Posted by ApplicantPro