Equipment operator jobs in Tulsa, OK - 88 jobs

Equipment Operators responsibilities and abilities include but are not limited to the list below. Other duties may be assigned. * Ability to proficiently operate three or more types of heavy equipment such as a backhoe, trackhoe, scrapers, dozer, excavator, loader, rock trucks, compactors, articulated trucks, crushers, and/or motor graders with or without GPS in a manner to prepare the job site to meet the required grades. * Fastens attachments to tractor with clevis or wedge pin hitches. * Connects hydraulic hoses, belts, mechanical linkage, or power takeoff shaft to tractor to provide power to raise, lower, or tilt attachment. * Moves levers to control tool bars, carriers, and disks. * Moves hand and foot levers to control hydraulic shovel. * Uses shovel to dig trenches and holes of specified length, depth and width, remove loosened material and put in piles or transport trucks. * Moves levers and depresses pedals to maneuver equipment and raise, lower, and tilt attachment to clear right-of-way. * Feels lever and listens for stalling action of engine to estimate depth of cut. * Drives bulldozer in successive passes over terrain to raise or lower terrain to specified grade following markings on grade stakes or hand signals. * Responsible to construct/grade new roadways, base courses, building pads, footing excavation and water ponds and to properly slope and grade to specifications. * Responsible to load, move, level and grade dirt, rocks, demoed concrete and other materials in a safe and efficient manner all in a high paced environment to maintain production goals. * Ability to maintain the initiative to maintain the flow of work under minimal supervision. * Responsible of demolition of bridges and other structures with excavators and hydraulic hoe rams. * Responsible to operate equipment within a Pipe Crew environment such as an excavator or loader. * Responsible for general housekeeping, light maintenance of equipment, proper care of equipment, operating the equipment without damaging it along with maintenance checks of equipment including reporting usage/utilization hours on a daily basis. * May work with GPS installed devices on dozers and motor graders. * Learn, follow and promote all safety standards of Ralph L Wadsworth and its projects. * Work weekend, holiday, and/or overtime work as the project needs require. * Perform Laborer work as required * Performs other duties as assigned by immediate supervisor. * Have a minimum of 4 years of Heavy Equipment Operating Experience with multiple types of equipment. * Willing to do laborer work * Ability to work safely under pressure with time constraints in a changing environment. * Frequent gross body movements such as bending, climbing into equipment, lifting (up to 75lbs), twisting, standing, balancing, stooping, handling materials, moving around hazardous sites. * Good Eye to Hand coordination a must. Depth perception required. * High School diploma/GED preferred. * Flexible availability to include overtime and possible weekends and nights. * Valid Driver's License We are an equal opportunity employer: We do not discriminate based on race, color, national origin, religion, creed, sex, sexual orientation, gender identity, disability, age, genetic information, marital status, military status, membership or activity in a local human rights commission, or status with regard to public assistance, or any other characteristic protected by applicable law. #LI-KM1

Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. As an experienced Equipment Operator, after paid training, you will put your skills to work - safety operating equipment to move earth, tools and materials to and from job sites. Reporting to a seasoned Foreman, you will join a crew to get the job done right. We believe in the power of teamwork, and all crew members are expected to assist with general labor as needed. What You'll Do * Safely operate heavy equipment such as: skid steers, backhoe, trencher, paver, dozer, milling saw, road grater, hydro-excavator, track hoe and more * Load and unload equipment and materials * Maintain daily pre-shift vehicle and equipment inspections * Perform regular maintenance and cleaning on assigned vehicles and equipment * Maintain all industry-required Operator Qualifications * Perform other tasks as requested by leadership What You'll Have * High School diploma or equivalent * Valid Driver's License * 1+ year experience safely operating equipment in close proximity to workers and underground utilities What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training: natural gas distribution, utility excavation, safety * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Tulsa Nearest Secondary Market: Oklahoma

Job Description Get to Know Us With a company built on family-by family-it's no surprise that working here is so much more than just putting on a hard hat and work boots. At Crossland, you join a group of Real Builders who care about bringing long-lasting facilities to our clients and providing the best culture and opportunities for our employees. With our own in-house education program, you'll find the resources, support, and training necessary to put you on the path to success. Benefits + Paid Time Off When you want the best team, you offer benefits accordingly. Competitive pay, a family atmosphere, and great benefits are part of our culture of celebrating and appreciating our people. Health, Dental and Vision Insurance Life Insurance 401(k) retirement plan with guaranteed match Flexible Spending Account Paid time off Holiday pay Paid education opportunities Perks Company Apparel Safety Incentives for Field Employees Milestone Anniversary Gifts Company Events (Picnics and Christmas Party) Diaper Bundle Program for new parents Flu Shots, and so much more! About the Role We are looking for candidates with a minimum of 3-5 years of experience operating heavy equipment machinery. This position can be physically demanding at times and includes long seat hours. Some travel may be necessary, and you must have your own transportation. If you're a hard worker, love being outdoors, and enjoy a team atmosphere and camaraderie, this is the job for you! Essential Responsibilities Performs any combination of the following duties on construction projects, usually working in a utility capacity and by transferring from one task to another. Operating heavy equipment including excavators, dozers, scrapers, backhoes, rollers, blade and skid steer. Operate routinely used tools and equipment. Perform routine inspection and preventive maintenance on assigned equipment. Load and unload equipment from vehicles and trailers. Complete required paperwork, forms and records as required. Coordinate machine actions with crew members in response to hand or audio signals. Ability to work without close supervision once directed on task. Obeys and follows all safety rules on the job site and encourages others to do the same. Maintains a good relationship with co-workers and works well with others to accomplish a task. EOE M/F/D/V

Job Posting Title Heavy Equipment Operator Creek Turnpike (Tulsa) Agency 978 OKLAHOMA TURNPIKE AUTHORITY Supervisory Organization Creek Riverside Maintenance Facility Job Posting End Date Refer to the date listed at the top of this posting, if available. Continuous if date is blank. Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation Job Description Why join the Oklahoma Turnpike Authority? The Oklahoma Turnpike Authority (OTA) has been serving Oklahomans since 1947, managing and maintaining a modern, safe, and efficient turnpike system across the state. With a commitment to customer service and innovation, OTA plays a vital role in ensuring smooth and reliable travel for millions of motorists each year. As a part of our team, you'll have the opportunity to make a meaningful impact while working in a collaborative and supportive environment. OTA offers competitive pay, excellent benefits, and opportunities for growth, making it an excellent choice to build your career in public service. Position Overview This is a full-time position working approximately 7:30am - 4:00pm, located on the Creek Turnpike in Tulsa, Oklahoma. The Heavy Equipment Operator is responsible for operating power equipment and performing related tasks in the maintenance and repair of highways. Compensation Level I - $20.50 per hour or $42,630 annually (potential to promote to Level II after obtaining CDL within the first 6 months, and with years of experience as required for Level II) Level II - $23.77 per hour or $49,455 annually Primary Duties and Responsibilities * Operate equipment or heavy machinery such as trucks, tractors, road graders, dozers, front-end loaders, cranes, backhoes, paint machines, semi-trailers, snow removal equipment and other equipment as needed. * Performs minor repairs and maintenance on equipment and facilities. * Repairs failures in the roadway shoulders or bridge decks. * Repairs and/or replaces signs, posts, guardrails and fences. * Provides traffic control assistance using a stop/slow sign or flag to direct highway traffic. * Applies herbicide to highway rights-of-way to control weeds and other unwanted vegetation. * Remove debris including tires, animal carcasses, spilled items and other obstacles. Physical Demands and Work Environment * While performing the duties of this job, the employees are frequently required to stand, walk and reach; and talk and hear. * Routinely, employees are required to sit; to manipulate or feel objects, tools or controls; climb or balance; and stoop, kneel, crouch or crawl. * Employees must regularly lift 80 pounds and occasionally lift and/or move up to 100 pounds. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Minimum Qualifications * LEVEL I - Education and Experience requirements at this level are none. * LEVEL II - Education and Experience requirements at this level consist of one year of experience in operating heavy equipment (preferably within road construction/maintenance) and possess a current Class A Commercial Driver's License (CDL). Knowledge, Skills, Abilities and Competencies * Knowledge of the operation and servicing of equipment or heavy machinery used in highway construction and maintenance; of materials used in highway construction and maintenance; and of proper highway traffic control during maintenance operations. * Ability is required to operate heavy equipment or machinery used in highway construction and maintenance; to use highway construction and maintenance materials; to follow instructions; and to communicate effectively. * Persons appointed to the position must possess or obtain a commercial driver's license, class A, no later than five months from the date of appointment. * Applicants must be willing and able to perform all job-related travel normally associated with this position; be willing to work hours other than on regular shifts during emergency situations; and possess a working telephone to receive emergency on-call duty messages. Level Descriptor This is the basic level where incumbents work under close supervision operating and maintaining power equipment and performing related unskilled and semiskilled tasks in the construction, maintenance and repair of highways. Benefits Highlights OTA is proud to provide a comprehensive benefits package designed to support eligible employees and their eligible dependents: * Generous Annual Benefit Allowance: Up to $21,934 to help cover insurance premiums for employees and their families. * Comprehensive Insurance Plans: A variety of options with no exclusions for pre-existing conditions. * Flexible Spending Accounts (FSAs): * Pre-tax savings for healthcare and dependent care expenses. * Retirement Savings Plans: o Pathfinder Defined Contribution Plan: Employer matches 6% of a minimum 4.5% employee contribution (up to 7% if the employee contributes 7%). o OPERS Defined Benefit Plan: Available for reenrollment to employees enrolled prior to November 1, 2015. * Paid Leave: o 15 days annually during the first 1-5 years of service. o 18 days annually for 5-10 years of service. o 20 days annually for 10-20 years of service. o 25 days annually for over 20 years of service. o Sick leave: Accrued at 15 days per year. o Paid Maternity leave for eligible employees. * Holidays: Eleven paid holidays annually. * Employee Discounts: Special rates with various vendors and companies. * Longevity Payment: Monetary rewards beginning at two years of service to recognize dedicated tenure. * Thrive: Empower Oklahoma State employees to improve & enhance their well-being. OTA is an Equal Opportunity Employer. Reasonable accommodation to individuals with disabilities may be provided upon request. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current active State of Oklahoma employees must apply for open positions internally through the Workday Jobs Hub. If you are needing any extra assistance or have any questions relating to a job you have applied for, please click the link below and find the agency for which you applied for additional information: Agency Contact

** Kemp Quarries is a leading producer of construction aggregates, primarily crushed stone, sand and gravel. These materials are most often produced from natural deposits of limestone and river sand. Our mining process typically begins with drilling and blasting the rock into smaller pieces. The material goes through various stages of crushing and screening to produce the sizes and specifications desired by our customers. Our aggregates are used in different ways within the construction industry. As an associate member of the Oklahoma and Arkansas AGC chapters, we work closely with member contractors in providing materials to meet the most stringent needs and state certifications. ◾ As a base material underneath highways, walkways, airport runways, parking lots and railroads. ◾ To help aid in water filtration, purification and erosion control including Type I and Type II Rip Rap. ◾ Used as a raw material in combination with other resources to construct many of the items that we rely on daily. ◾ Houses and apartments; ◾ Roads, bridges and parking lots; ◾ Schools and hospitals; ◾ Commercial buildings and retail space; ◾ Sewer systems; and ◾ Airports and runways. Construction aggregates have formed the underpinnings for many of our cities, towns and transportation networks. Thousands of years ago, civilizations built entire cities with stone, sand and gravel, and many of these ancient structures still exist today. Aggregates are durable, attractive, and can be used in many different applications. On average, every American uses approximately eight tons of aggregates each year. Although our principal product is construction aggregates, Kemp Quarries offers a variety of other state-approved products and services. About the Position The primary functions of the operator include but are not limited to being responsible for the safe and efficient operation of mobile aggregate mining and processing equipment and effectively monitor all equipment under his/her control. KEY RESPONSIBILITES / ESSENTIAL FUNCTIONS: ◾ Regular, reliable attendance at the worksite or assigned work location. ◾ Follow all safety and environmental rules, regulations and procedures as set forth by company policies and MSHA. ◾ Follow all company policies and local, state and federal regulations for safe working procedures. ◾ Ability and knowledge to operate and monitor equipment in a safe and efficient manner. ◾ Ability to perform preventive maintenance and pre-shift inspections; repair and/or clean equipment as needed. ◾ Responsible for overall housekeeping including plant, equipment, and site. ◾ Ability to comprehend and complete all needed paperwork in a timely and accurate manner. ◾ Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. PHYSICAL REQUIREMENTS: ◾ Lift objects of various dimensions and up to 75 lbs occasionally and 50 lbs frequently. ◾ Ability to repeatedly climb stairs and ladders. ◾ Ability to repeatedly balance, bend from the trunk, crawl, kneel, push and pull objects. ◾ Ability to use vibration producing tools frequently. ◾ Ability to tolerate working outdoors in all environmental temperatures and weather conditions. ◾ Ability to repeatedly reach, squat and tolerate prolonged standing/walking/sitting. ◾ Ability to frequently walk on uneven surfaces. REQUIRED SKILLS/EXPERIENCE: ◾ None to very little experience. ◾ Some to no Level One equipment utilized at operator's facility required. ◾ High school diploma or general education degree (GED) preferred. ◾ Good safety, behavior and attendance record. ◾ The selected candidate will be required to work collectively in a team environment with other co-workers and managers. ◾ Willingness to do other work as needed, including heavy labor. ◾ Willingness to work outside in all weather extremes. ◾ Willingness and ability to work a flexible schedule, including swing shift, graveyard shift, over time and weekends as required. ◾ Ability to work near, around or on light or heavy equipment. Location Muskogee, OK We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including age, sex, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability that does not prohibit performance of essential job functions. Federal Law prohibits the employment of unauthorized aliens. All persons hired must submit satisfactory proof of employment authorization and identity (valid driver's license. Birth certificate, Green Card, etc.) with in three days of being hired. Failure to submit such proof within the required time shall result in immediate termination.

Job Posting Title District 8 - Heavy Equipment Operator I or II Agency 345 DEPARTMENT OF TRANSPORTATION Supervisory Organization Job Posting End Date (Continuous if Blank) Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation $40,600 - Level I $47,100 - Level II Why You'll Love Working Here: Our benefits go beyond the basics, offering annual benefit allowances, a variety of health, dental, and vision plan options, paid annual and sick leave that rolls over each year, 11 paid holidays, robust retirement savings plans, and an EAP & wellness program to support you every step of the way. Annual Benefit Allowance: The benefits allowance covers up to $20,538.24 for employees and their dependents to enroll in benefits. Comprehensive Insurance Plans: The State offers several different medical, dental, and vision plans to better fit your needs. Including options to enroll in a Health Savings Account (HSA) or a Flexible Spending Accounts (FSA). Retirement Savings Plans: Pathfinder Defined Contribution Plan: available to employees who began State employment after November 1st, 2015. Employer matches 6% with an employee contribution of 4.5%. Employer matches 7% with an employee contribution of 7% or above. OPERS Defined Benefit Plan: available to returning employees who were previously enrolled in OPERS. Annual & Sick Leave (PTO): 15 days accrued annually during the first 1-5 years of service. 18 days accrued annually for 5-10 years of service. 20 days accrued annually for 10-20 years of service. 25 days accrued annually for over 20 years of service. Sick leave: Accrued at 15 days per year Paid Holidays: 11 paid holidays per year Longevity Pay: Longevity payments are paid annually to eligible State employees with a minimum of 2 years of State service. Employee Assistance Program (EAP): EAP is a cooperative effort between employees and administration to help employees gain access to professional services in resolving personal problems. Job Description Position Title: Heavy Equipment Operator I or II Department: Operations Division: 8 Report to: Road Maintenance Supervisor FLSA Status: Non-Exempt Location: 4002 N. Mingo Valley Expressway, Tulsa, OK 74116 Note: Candidates selected for positions at the Oklahoma Department of Transportation may be required to complete a pre-employment background check and drug screening before beginning employment. Some positions may also require applicants to participate in a Physical Abilities Demonstration and be rated as capable of performing the essential functions of this job family. Basic Purpose Positions in this job family are responsible for operating power equipment and performing related tasks in the maintenance and repair of highways. Typical Functions Operates equipment or heavy machinery such as trucks, tractors, road graders, bulldozers, front- end loaders, cranes, backhoes, paint machines, semi-trailers, snow removal equipment and other equipment as needed. Performs minor repairs and maintenance on equipment and facilities. Repairs failures in the roadway shoulders or bridge decks. Repairs and/or replaces signs, posts, guardrails and fences. Provides traffic control assistance using a stop/slow sign or flag to direct highway traffic. Applies herbicide to highway rights-of-way to control weeds and other unwanted vegetation. Remove debris including tires, animal carcass, spilled items and other obstacles. Level Descriptor Level I This is the basic level where incumbents work under close supervision operating and maintaining power equipment and performing related unskilled and semiskilled tasks in the construction, maintenance and repair of highways. Level II This is the career level where incumbents perform skilled work at the full performance level in operating heavy equipment used in highway construction or repair and also perform a variety of routine highway maintenance duties. Knowledge, Skills, Abilities and Competencies Level I Knowledge, Skills, and Abilities required at this level include knowledge of the safe operation and or heavy machinery. Ability is required to perform manual labor; to maintain and operate power equipment; and to follow instructions. Level II Knowledge, Skills, and Abilities required at this level include knowledge of the operation and servicing of equipment or heavy machinery used in highway construction and maintenance; of materials used in highway construction and maintenance; and of proper highway traffic control during maintenance operations. Ability is required to operate heavy equipment or machinery used in highway construction and maintenance; to use highway construction and maintenance materials; to follow instructions; and to communicate effectively. Education and Experience Level I Education and Experience requirements at this level are none. Level II Education and Experience requirements at this level consist of one year of experience in operating heavy equipment. Special Requirements Possession of a valid Oklahoma driver's license at time of employment. Some agencies may require possession of a valid Oklahoma commercial driver's license, class A or B with appropriate endorsements referenced in United States Department of Transportation Title 47, Chapter 6, Section 101 et seq. at time of appointment. Persons appointed to positions at the Oklahoma Department of Transportation or the Oklahoma Turnpike Authority must possess or obtain a commercial driver's license, class A, no later than five months from the date of appointment. ODOT employees are required to have a CDL tank vehicle endorsement. Applicants must take and pass drug test prior to appointment. Such tests will be administered through the appointing agency. This requirement is referenced in 49 Code of Federal Regulation, parts 40 and 382. Applicants must be willing and able to perform all job- related travel normally associated with this position; be willing to work hours other than on regular shifts during emergency situations; and possess a telephone in residence to receive emergency on-call duty messages. While performing the duties of this job, the employees are frequently required to stand, walk and reach; and talk and hear. Routinely, employees are required to sit; to manipulate or feel objects, tools or controls; climb or balance; and stoop, kneel, crouch or crawl. Employees must regularly lift 80 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Agencies may have determined positions in this job family to be safety sensitive as defined by 63 O.S. § 427.8. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current active State of Oklahoma employees must apply for open positions internally through the Workday Jobs Hub.

Job Title: Small Drill Operator - 2nd Shift Company: HireCallShift: 2nd Shift | Monday-Thursday | 3:30 PM - 2:00 AM Pay: $23.45/hour + 5% shift differential Job SummaryHireCall is seeking an experienced Small Drill Operator for a 2nd shift opportunity with a well-established manufacturing company. This position is responsible for setting up and operating various machining equipment to produce roll-forged sheave hubs with a finished diameter of 10” and smaller. Candidates must be detail-oriented, safety-focused, and able to meet production and quality standards. Essential Duties and Responsibilities Set up and operate the following equipment in a highly efficient manner: Saws Tapper Machine Drill Presses Bolt Machines Center Drill Machine Excello Tubing/Pipe Part-Off Machine Small Bar Lathe Engine Lathe / Turret Lathe Operate one or more machines as needed to meet production and quality requirements Read and interpret blueprints Apply basic shop math Lift 1-40 pounds multiple times per day Stand, walk, bend, twist, and reach to safely operate machines and handle parts Communicate effectively with supervisors, trainers, and coworkers Read, write, and understand safety warnings, work instructions, and required paperwork Follow verbal and written instructions with accuracy and long-term retention Maintain punctuality and regular attendance to support manufacturing schedules Work in an environment with exposure to dust, smoke, and fumes typical of a manufacturing setting Job Requirements Minimum of 2 years of relevant manufacturing experience High School Diploma or GED required If you meet these requirements, please submit your resume to ************************** or call ************ to schedule your interview with Teresa. Walkins are welcome. Feel free to stop by 2310 Old Hwy 66, Catoosa, OK 74015 ************************ Monday through Friday from 8am-3:30pm. Please bring 2 forms of ID with you. HireCall is an equal opportunity employer, and we value diversity. #Hotjobs

Operate excavators, bulldozers, loaders, and trenchers for underground utility projects Follow project plans, blueprints, and specifications to ensure precise and accurate work Perform daily inspections and routine maintenance on equipment Coordinate with foremen, project managers, and crew members to meet deadlines Maintain strict adherence to safety procedures and company policies Operate heavy equipment such as excavators, bulldozers, and backhoes to excavate, grade, and compact earth within specified parameters Perform routine maintenance on equipment to ensure optimal performance Follow safety protocols and regulations Work with the construction team to ensure projects are completed safely, on time, and within budget Maintain a clean and organized work site Communicate effectively with supervisors, and job site personnel Responsibilities: Operate heavy equipment such as excavators, bulldozers, and backhoes to excavate, grade, and compact earth within specified parameters Perform routine maintenance on equipment to ensure optimal performance Follow safety protocols and regulations Work with the construction team to ensure projects are completed safely, on time, and within budget Maintain a clean and organized work site Communicate effectively with supervisors, and job site personnel Requirements: Proven 2 years of experience as a Heavy Equipment Operator of: Excavator, Skid Steer Loader, Backhoe, Dozer, and other Earthmoving equipment High School Diploma or GED Valid driver's license and clean driving record Knowledge of heavy equipment operation and maintenance Strong communication and teamwork skills Ability to work in a fast-paced environment Attention to detail and safety consciousness No criminal misdemeanors in the last 5 years or criminal felonies in the last 7 years Willingness to travel from time to time if the project requires Weekly Pay | Full Time + OT | $38.04 per hour Benefits: Competitive pay with overtime opportunities Health, dental, and vision insurance Retirement plan / 401(k) Paid time off and holidays Stable, year-round work Opportunity for advancement Why Join Us: At PSC Construction, we value our employees and provide a positive work environment where you can grow and succeed. We offer competitive pay, opportunities for advancement, and ongoing training and development. Joining our team means becoming part of a company that is committed to excellence and delivering high-quality construction projects. Plus, as a Skilled Laborer I at PSC Construction, you will have the opportunity to work on a variety of projects and gain valuable experience in the construction industry. Whether you are just starting your career or looking to take the next step, PSC Construction is the place to be. Join Our Team: If you are a Heavy Equipment Operator with a passion for underground utility work, we want to hear from you! Apply now to join the PSC Construction team and take the next step in your career.

Job Title: Directional Boring Driller/ Operator Industry: Utilities, Power, Telecommunications, and Pipeline Department: Operations Reports To: Field Supervisor FLSA Status: Non-Exempt, Full-Time Compensation: Hourly, Health Benefits, Dental, Vision, 401K, Paid Vacation. Job Summary: The role of the driller/operator is core to the work we do at Dynetek Solutions LLC. A successful individual in this role will be able to demonstrate a skillful approach to problem solving while minimizing risk on the job site. The driller/operator will identify the needed resources required to successfully complete a job before, during and post drilling commences. The driller/operator will act independently but must have adequate communication skills to command the follow-through with the team he/she is working with. Responsibilities and Duties: - Must follow all company's safety policies and procedures to ensure that appropriate safety precautions are taken in all circumstances and at all times. - Conduct briefings to ensure all utilities have been located and accounted for. - Use hand tools to spot existing utilities and prepare the route for the bore to follow. - Set up directional drill and other support equipment for underground utility operations. - Skillfully operate horizontal directional drill equipment for installation of electric underground cable, including; operation of the drill to bore for product and prepare hole to install product with minimal disruption to the surrounding infrastructure. - Understanding of directional boring principals, mixing systems and mud, use of mud vac rigs, etc. - Place, remove or maintain underground utilities as directed. This includes but is not limited to carrying pipe, bags of material and other heavy items, jack hammering, shoveling, tamping and installing pipe, and pulling power cable. -Being able to read and understand machining instructions, job order, blueprint, process sheet, or layout on workpiece to determine machining required, sequence of operation, tooling, feed, and speed rate, applying knowledge of materials and machining. -Work responsibly and communicate effectively with crew members. - Secure work site, equipment and materials at the end of each shift to ensure public safety and safety of equipment and materials. - Clean-up job site after work is finished. - Refill holes, trenches, and compact soil to ensure that it is packed down and even.\ - Ensure that plants, flowers, and landscape is left in the same condition that it was found in. Lay dirt, sand, grass seed and straw as needed. - Place temporary asphalt patches or concrete on streets as needed. -Drive/tow truck with drill to job site. - Performs preventive maintenance by greasing, oiling and making minor repair on equipment. - Perform other duties as required or assigned by supervisor. Competencies for the Job Ability and skills Ability to read and comprehend machining instructions, blueprint, process sheet, or layout on workpiece to determine machining required, etc. Ability to tell when something is wrong or is likely to go wrong. Ability to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., follow safety policies and procedures before, during and after drilling). Ability to communicate and work with teammates. Ability to learn to operate new equipment. Knowledge - Experience of at least 2 years or more as an underground directional drill operator. - Understanding of utility locating laws and safety compliance procedures. - Ability to read and understand construction prints. - Rock hammer experience. Benefits: Friendly, supportive and dynamic work environment. Competitive Pay. Training & advancement opportunities. Paid vacation and 10 paid Holidays Health Benefits, dental, vision, 401K (matching contribution). This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. Requirements: Requirements - CDL - Able to work outdoors in all types of weather and conditions. - Able to work with loud noises. - Able to lifts and load workpieces or equipment of minimum 50 pounds in a daily basis. - Able to comply with job physical demands (e.g., standing, walking, driving, lifting, etc.). - Able to pass a pre-employment screening that includes background check and drug testing. - Valid driver's license and ticketless driving record in the last 3 years. - Able to meet all DOT requirements (physical and drug testing).

We focus on hiring the right people. It is just as much “what can we do for you” as it is “what can you do for us”. We make it a priority to give each employee what they need in order to be their best because we understand that everyone is different. We are on a mission to continue to grow our DT community. We are looking for individuals that align with our values, our mission, and our ambition. Come build your career with a company that supports and encourages you to accomplish your personal and professional goals. Expectations of This Position: The Heavy Equipment Operator is responsible for operating company-owned machinery in a safe and effective manner. They must be able to demonstrate safe operation of the assigned equipment. Operator is expected to use his/her experience and judgment to make decisions considering safety and efficiency. Duties: · Ensure all safety requirements and codes are implemented and met by all team members · Ensure that proper safety and incident reporting procedures are followed · Understand means and methods to safely perform assigned tasks · Understand and ensure the safety of team members · Monitor and track field data as requested by the superintendent · Maintain required daily paperwork · Operate heavy equipment. · Operate heavy equipment in a safe and appropriate manner to minimize the risk of injury, property damage, or loss of life in accordance with company policies and procedures · Perform daily pre-inspections: identify problems or defects that need to be corrected, and report problems or defects immediately · Heavy Equipment includes (but is not limited to): Excavator, Dozer, Off-Road Truck, Motor Grader, Backhoe, Roller, Reclaimer Compensation Package: · Hourly position based on experience: $16.00 - $25.00 per hour depending on experience · Medical benefits available after 60 days of full-time employment · Supplemental benefits available after 60 days of full-time employment · 401K with company match plan after 1 year of full-time employment · Life Insurance and Disability of $25,000 paid by company Education/License: · High School Diploma / GED (Preferred) · OSHA 10 or 30 (Preferred) · CPR / First Aid Training (Preferred)

We are seeking an experienced Operator II to work on our construction projects. The successful candidate will be responsible for operating heavy equipment safely and efficiently to ensure that work is completed on schedule and within budget. As a key member of our team, the Operator II will work closely with other crew members and subcontractors to ensure that projects are completed to the highest level of quality. Responsibilities Operate heavy equipment, including bulldozers, excavators, and loaders, to move materials, earth, and other heavy objects Ensure that all work is completed safely, efficiently, and to the highest level of quality Maintain equipment and perform basic repairs as needed Communicate regularly with other crew members and subcontractors to ensure that work is completed on schedule and within budget Develop and maintain relationships with crew members and subcontractors to ensure that they are aware of project schedules and deadlines Ensure that all equipment is properly maintained and that safety procedures are followed at all times Identify and resolve issues that arise during construction projects Provide on-the-job training to new operators as needed Other duties as assigned Qualifications High school diploma or equivalent; vocational training in heavy equipment operation preferred 2+ years of experience operating heavy equipment, with experience in a construction setting preferred Ability to read and interpret construction plans and specifications Strong communication skills, with the ability to communicate effectively with a variety of audiences Strong analytical skills, with the ability to analyze project data and identify trends and opportunities for improvement Experience with government contracts and compliance is a plus A commitment to promoting diversity, equity, and inclusion in the workplace Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description The Large Capacity Forklift Operator position is an 8-12 hour rotating shift reporting directly to the Department Supervisor/Manager. This position utilizes a large capacity wheel loader industrial truck equipped with lifting devices for the purpose of loading/unloading oilfield tubulars both on and off the plant's production lines, storage racks, trucks and/or railcars. This position is also responsible for the inventory control of the products moved. The position practices safe work habits and follows standard work methods to meet both customer and API requirements. KEY RESPONSIBILITIES: Ensuring quality and quantity of work and product produced is met. Proper care/usage/storage of tools, equipment and product. Adherence to corporate and department policies, procedures, practices and specifications. Working normal shift schedule and hours, as required to include any extended work schedule or days and/or hours as required. Accurate and timely completion of all tasks assigned by the Shift Lead, Supervisor and/or Manager. Perform duties as an individual or in part of a group type setting. Report any discrepancies to the shift lead, supervisor and/or manager. Prepare for work and perform the work elements common to the job such as, but no limited to: Small Forklift and Large Capacity Wheel Loader Forklift Certifications. Appropriate communication via radio, telephone and/or in person. Proper departmental equipment maintenance (daily check). Proper equipment start-up and operation. Verify proper material and quantity prior to product processing. Verify proper material and quantity upon completion of product processing. Accurate and timely completion of pipe movement records. Ensure proper handling and storage of products. Ensure separation of material by SLN (heat number), mill order and/or customer. Ensure separation of conforming and non-conforming material processed. Proper procurement and delivery of required test materials. Maintain adequate amount of consumable supplies. Maintain organization and cleanliness of work area. Proper operation and measurement readings of gauges i.e. tenths tape Proper operation of product turning tools. All other tasks assigned by the Shift Lead, Supervisor and/or Manager. #LI-JB1 #LI-Onsite EXPERIENCE, SKILLS, AND KNOWLEDGE: Adheres to safety and security procedures. Reports potentially unsafe conditions. Identifies and resolves problems in a timely manner. Gathers and analyzes information skillfully. Develops alternative solutions. Works well in group problem solving situations. Uses reason, even when dealing with emotional topics. Uses equipment and materials properly. Must be able to lift maximum 50lbs. Must be able to stand and/or bend for long periods of time. Must be able to read, write, and communicate clearly in the English language. Must be able to work rotating 8-12 hour shifts, nights, weekends, and holidays. Basic math skills. Basic computer skills. Work in environmentally challenging conditions. EDUCATION, TRAINING, AND CERTIFICATIONS: Preferred: 1+ years operating a forklift Preferred: Forklift Training (Large Capacity) CRITICAL COMPETENCIES & CAPABILITIES: Safety conscious Quality conscious Accountable Reliable Punctual Detailed Adaptable Proactive Self-motivated Open-minded Communicative

The Large Capacity Forklift Operator position is an 8-12 hour rotating shift reporting directly to the Department Supervisor/Manager. This position utilizes a large capacity wheel loader industrial truck equipped with lifting devices for the purpose of loading/unloading oilfield tubulars both on and off the plant's production lines, storage racks, trucks and/or railcars. This position is also responsible for the inventory control of the products moved. The position practices safe work habits and follows standard work methods to meet both customer and API requirements. KEY RESPONSIBILITIES: Ensuring quality and quantity of work and product produced is met. Proper care/usage/storage of tools, equipment and product. Adherence to corporate and department policies, procedures, practices and specifications. Working normal shift schedule and hours, as required to include any extended work schedule or days and/or hours as required. Accurate and timely completion of all tasks assigned by the Shift Lead, Supervisor and/or Manager. Perform duties as an individual or in part of a group type setting. Report any discrepancies to the shift lead, supervisor and/or manager. Prepare for work and perform the work elements common to the job such as, but no limited to: Small Forklift and Large Capacity Wheel Loader Forklift Certifications. Appropriate communication via radio, telephone and/or in person. Proper departmental equipment maintenance (daily check). Proper equipment start-up and operation. Verify proper material and quantity prior to product processing. Verify proper material and quantity upon completion of product processing. Accurate and timely completion of pipe movement records. Ensure proper handling and storage of products. Ensure separation of material by SLN (heat number), mill order and/or customer. Ensure separation of conforming and non-conforming material processed. Proper procurement and delivery of required test materials. Maintain adequate amount of consumable supplies. Maintain organization and cleanliness of work area. Proper operation and measurement readings of gauges i.e. tenths tape Proper operation of product turning tools. All other tasks assigned by the Shift Lead, Supervisor and/or Manager. #LI-JB1 #LI-Onsite EXPERIENCE, SKILLS, AND KNOWLEDGE: Adheres to safety and security procedures. Reports potentially unsafe conditions. Identifies and resolves problems in a timely manner. Gathers and analyzes information skillfully. Develops alternative solutions. Works well in group problem solving situations. Uses reason, even when dealing with emotional topics. Uses equipment and materials properly. Must be able to lift maximum 50lbs. Must be able to stand and/or bend for long periods of time. Must be able to read, write, and communicate clearly in the English language. Must be able to work rotating 8-12 hour shifts, nights, weekends, and holidays. Basic math skills. Basic computer skills. Work in environmentally challenging conditions. EDUCATION, TRAINING, AND CERTIFICATIONS: Preferred: 1+ years operating a forklift Preferred: Forklift Training (Large Capacity) CRITICAL COMPETENCIES & CAPABILITIES: Safety conscious Quality conscious Accountable Reliable Punctual Detailed Adaptable Proactive Self-motivated Open-minded Communicative

** Kemp Quarries is a leading producer of construction aggregates, primarily crushed stone, sand and gravel. These materials are most often produced from natural deposits of limestone and river sand. Our mining process typically begins with drilling and blasting the rock into smaller pieces. The material goes through various stages of crushing and screening to produce the sizes and specifications desired by our customers. Our aggregates are used in different ways within the construction industry. As an associate member of the Oklahoma and Arkansas AGC chapters, we work closely with member contractors in providing materials to meet the most stringent needs and state certifications. As a base material underneath highways, walkways, airport runways, parking lots and railroads. To help aid in water filtration, purification and erosion control including Type I and Type II Rip Rap. Used as a raw material in combination with other resources to construct many of the items that we rely on daily. Houses and apartments; Roads, bridges and parking lots; Schools and hospitals; Commercial buildings and retail space; Sewer systems; and Airports and runways. Construction aggregates have formed the underpinnings for many of our cities, towns and transportation networks. Thousands of years ago, civilizations built entire cities with stone, sand and gravel, and many of these ancient structures still exist today. Aggregates are durable, attractive, and can be used in many different applications. On average, every American uses approximately eight tons of aggregates each year. Although our principal product is construction aggregates, Kemp Quarries offers a variety of other state-approved products and services. About the Position The primary functions of the operator include but are not limited to being responsible for the safe and efficient operation of mobile aggregate mining and processing equipment and effectively monitor all equipment under his/her control. KEY RESPONSIBILITES / ESSENTIAL FUNCTIONS: Regular, reliable attendance at the worksite or assigned work location. Follow all safety and environmental rules, regulations and procedures as set forth by company policies and MSHA. Follow all company policies and local, state and federal regulations for safe working procedures. Ability and knowledge to operate and monitor equipment in a safe and efficient manner. Ability to perform preventive maintenance and pre-shift inspections; repair and/or clean equipment as needed. Responsible for overall housekeeping including plant, equipment, and site. Ability to comprehend and complete all needed paperwork in a timely and accurate manner. Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. PHYSICAL REQUIREMENTS: Lift objects of various dimensions and up to 75 lbs occasionally and 50 lbs frequently. Ability to repeatedly climb stairs and ladders. Ability to repeatedly balance, bend from the trunk, crawl, kneel, push and pull objects. Ability to use vibration producing tools frequently. Ability to tolerate working outdoors in all environmental temperatures and weather conditions. Ability to repeatedly reach, squat and tolerate prolonged standing/walking/sitting. Ability to frequently walk on uneven surfaces. REQUIRED SKILLS/EXPERIENCE: None to very little experience. Some to no Level One equipment utilized at operators facility required. High school diploma or general education degree (GED) preferred. Good safety, behavior and attendance record. The selected candidate will be required to work collectively in a team environment with other co-workers and managers. Willingness to do other work as needed, including heavy labor. Willingness to work outside in all weather extremes. Willingness and ability to work a flexible schedule, including swing shift, graveyard shift, over time and weekends as required. Ability to work near, around or on light or heavy equipment. Location Muskogee, OK We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including age, sex, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability that does not prohibit performance of essential job functions. Federal Law prohibits the employment of unauthorized aliens. All persons hired must submit satisfactory proof of employment authorization and identity (valid drivers license. Birth certificate, Green Card, etc.) with in three days of being hired. Failure to submit such proof within the required time shall result in immediate termination.

Heavy Equipment Operator Are you looking for a new challenge with a dynamic and growing company? Look no further! PSC Construction is seeking a Heavy Equipment Operator to join our team. Job Description: Operate excavators, bulldozers, loaders, and trenchers for underground utility projects Follow project plans, blueprints, and specifications to ensure precise and accurate work Perform daily inspections and routine maintenance on equipment Coordinate with foremen, project managers, and crew members to meet deadlines Maintain strict adherence to safety procedures and company policies Operate heavy equipment such as excavators, bulldozers, and backhoes to excavate, grade, and compact earth within specified parameters Perform routine maintenance on equipment to ensure optimal performance Follow safety protocols and regulations Work with the construction team to ensure projects are completed safely, on time, and within budget Maintain a clean and organized work site Communicate effectively with supervisors, and job site personnel Responsibilities: Operate heavy equipment such as excavators, bulldozers, and backhoes to excavate, grade, and compact earth within specified parameters Perform routine maintenance on equipment to ensure optimal performance Follow safety protocols and regulations Work with the construction team to ensure projects are completed safely, on time, and within budget Maintain a clean and organized work site Communicate effectively with supervisors, and job site personnel Requirements: Proven 2 years of experience as a Heavy Equipment Operator of: Excavator, Skid Steer Loader, Backhoe, Dozer, and other Earthmoving equipment High School Diploma or GED Valid driver's license and clean driving record Knowledge of heavy equipment operation and maintenance Strong communication and teamwork skills Ability to work in a fast-paced environment Attention to detail and safety consciousness No criminal misdemeanors in the last 5 years or criminal felonies in the last 7 years Willingness to travel from time to time if the project requires Weekly Pay | Full Time + OT | $38.04 per hour Benefits: Competitive pay with overtime opportunities Health, dental, and vision insurance Retirement plan / 401(k) Paid time off and holidays Stable, year-round work Opportunity for advancement Why Join Us: At PSC Construction, we value our employees and provide a positive work environment where you can grow and succeed. We offer competitive pay, opportunities for advancement, and ongoing training and development. Joining our team means becoming part of a company that is committed to excellence and delivering high-quality construction projects. Plus, as a Skilled Laborer I at PSC Construction, you will have the opportunity to work on a variety of projects and gain valuable experience in the construction industry. Whether you are just starting your career or looking to take the next step, PSC Construction is the place to be. Join Our Team: If you are a Heavy Equipment Operator with a passion for underground utility work, we want to hear from you! Apply now to join the PSC Construction team and take the next step in your career. #hc206672

Job Title: Directional Boring Driller/ Operator Industry: Utilities, Power, Telecommunications, and Pipeline Department: Operations Reports To: Field Supervisor FLSA Status: Non-Exempt, Full-Time Compensation: Hourly, Health Benefits, Dental, Vision, 401K, Paid Vacation. Job Summary: The role of the driller/operator is core to the work we do at Dynetek Solutions LLC. A successful individual in this role will be able to demonstrate a skillful approach to problem solving while minimizing risk on the job site. The driller/operator will identify the needed resources required to successfully complete a job before, during and post drilling commences. The driller/operator will act independently but must have adequate communication skills to command the follow-through with the team he/she is working with. Responsibilities and Duties: - Must follow all company's safety policies and procedures to ensure that appropriate safety precautions are taken in all circumstances and at all times. - Conduct briefings to ensure all utilities have been located and accounted for. - Use hand tools to spot existing utilities and prepare the route for the bore to follow. - Set up directional drill and other support equipment for underground utility operations. - Skillfully operate horizontal directional drill equipment for installation of electric underground cable, including; operation of the drill to bore for product and prepare hole to install product with minimal disruption to the surrounding infrastructure. - Understanding of directional boring principals, mixing systems and mud, use of mud vac rigs, etc. - Place, remove or maintain underground utilities as directed. This includes but is not limited to carrying pipe, bags of material and other heavy items, jack hammering, shoveling, tamping and installing pipe, and pulling power cable. -Being able to read and understand machining instructions, job order, blueprint, process sheet, or layout on workpiece to determine machining required, sequence of operation, tooling, feed, and speed rate, applying knowledge of materials and machining. -Work responsibly and communicate effectively with crew members. - Secure work site, equipment and materials at the end of each shift to ensure public safety and safety of equipment and materials. - Clean-up job site after work is finished. - Refill holes, trenches, and compact soil to ensure that it is packed down and even.\ - Ensure that plants, flowers, and landscape is left in the same condition that it was found in. Lay dirt, sand, grass seed and straw as needed. - Place temporary asphalt patches or concrete on streets as needed. -Drive/tow truck with drill to job site. - Performs preventive maintenance by greasing, oiling and making minor repair on equipment. - Perform other duties as required or assigned by supervisor. Competencies for the Job Ability and skills Ability to read and comprehend machining instructions, blueprint, process sheet, or layout on workpiece to determine machining required, etc. Ability to tell when something is wrong or is likely to go wrong. Ability to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., follow safety policies and procedures before, during and after drilling). Ability to communicate and work with teammates. Ability to learn to operate new equipment. Knowledge - Experience of at least 2 years or more as an underground directional drill operator. - Understanding of utility locating laws and safety compliance procedures. - Ability to read and understand construction prints. - Rock hammer experience. Benefits: Friendly, supportive and dynamic work environment. Competitive Pay. Training & advancement opportunities. Paid vacation and 10 paid Holidays Health Benefits, dental, vision, 401K (matching contribution). This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. Requirements Requirements - CDL - Able to work outdoors in all types of weather and conditions. - Able to work with loud noises. - Able to lifts and load workpieces or equipment of minimum 50 pounds in a daily basis. - Able to comply with job physical demands (e.g., standing, walking, driving, lifting, etc.). - Able to pass a pre-employment screening that includes background check and drug testing. - Valid driver's license and ticketless driving record in the last 3 years. - Able to meet all DOT requirements (physical and drug testing).

We focus on hiring the right people. It is just as much "what can we do for you" as it is "what can you do for us". We make it a priority to give each employee what they need in order to be their best because we understand that everyone is different. We are on a mission to continue to grow our DT community. We are looking for individuals that align with our values, our mission, and our ambition. Come build your career with a company that supports and encourages you to accomplish your personal and professional goals. Expectations of This Position: The Heavy Equipment Operator is responsible for operating company-owned machinery in a safe and effective manner. They must be able to demonstrate safe operation of the assigned equipment. Operator is expected to use his/her experience and judgment to make decisions considering safety and efficiency. Duties: * Ensure all safety requirements and codes are implemented and met by all team members * Ensure that proper safety and incident reporting procedures are followed * Understand means and methods to safely perform assigned tasks * Understand and ensure the safety of team members * Monitor and track field data as requested by the superintendent * Maintain required daily paperwork * Operate heavy equipment. * Operate heavy equipment in a safe and appropriate manner to minimize the risk of injury, property damage, or loss of life in accordance with company policies and procedures * Perform daily pre-inspections: identify problems or defects that need to be corrected, and report problems or defects immediately * Heavy Equipment includes (but is not limited to): Excavator, Dozer, Off-Road Truck, Motor Grader, Backhoe, Roller, Reclaimer Compensation Package: * Hourly position based on experience: $16.00 - $25.00 per hour depending on experience * Medical benefits available after 60 days of full-time employment * Supplemental benefits available after 60 days of full-time employment * 401K with company match plan after 1 year of full-time employment * Life Insurance and Disability of $25,000 paid by company Education/License: * High School Diploma / GED (Preferred) * OSHA 10 or 30 (Preferred) * CPR / First Aid Training (Preferred) Share Apply Apply for this position Required* First Name* Last Name* Email Address* Phone* Address Resume* We've received your resume. Click here to update it. Attach resume or Paste resume Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume Paste your resume here or Attach resume file Human Check* Submit Application

Job Posting Title District - 1 Heavy Equipment Operator I, II Agency 345 DEPARTMENT OF TRANSPORTATION Supervisory Organization Job Posting End Date (Continuous if Blank) Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation $40,000.00 - Level I $46,500.00 - Level II Job Description Basic Purpose Positions in this job family are responsible for operating power equipment and performing related tasks in the maintenance and repair of highways. Typical Functions * Operates equipment or heavy machinery such as trucks, tractors, road graders, dozers, front- end loaders, cranes, backhoes, paint machines, semi-trailers, snow removal equipment and other equipment as needed. * Performs minor repairs and maintenance on equipment and facilities. * Repairs failures in the roadway shoulders or bridge decks. * Repairs and/or replaces signs, posts, guardrails and fences. * Provides traffic control assistance using a stop/slow sign or flag to direct highway traffic. * Applies herbicide to highway right-of-ways to control weeds and other unwanted vegetation. * Remove debris including tires, animal carcass, spilled items and other obstacles. Level Descriptor Level I This is the basic level where incumbents work under close supervision operating and maintaining power equipment and performing related unskilled and semiskilled tasks in the construction, maintenance and repair of highways. Level II This is the career level where incumbents perform skilled work at the full performance level in operating heavy equipment used in highway construction or repair and also perform a variety of routine highway maintenance duties. Education and Experience Level I Education and Experience requirements at this level are none. Level II Education and Experience requirements at this level consist of one year of experience in operating heavy equipment. Knowledge, Skills, Abilities and Competencies Knowledge, Skills, and Abilities required at this level include knowledge of the operation and servicing of equipment or heavy machinery used in highway construction and maintenance; of materials used in highway construction and maintenance; and of proper highway traffic control during maintenance operations. Ability is required to operate heavy equipment or machinery used in highway construction and maintenance; to use highway construction and maintenance materials; to follow instructions; and to communicate effectively. Special Requirements Possession of a valid Oklahoma driver's license at time of employment. Some agencies may require possession of a valid Oklahoma commercial driver's license, class A or B with appropriate endorsements referenced in United States Department of Transportation Title 47, Chapter 6, Section 101 et seq. at time of appointment. Persons appointed to positions at the Oklahoma Department of Transportation or the Oklahoma Turnpike Authority must possess or obtain a commercial driver's license, class A, no later than five months from the date of appointment. ODOT employees are required to have a CDL tank vehicle endorsement. Applicants must take and pass drug test prior to appointment. Such tests will be administered through the appointing agency. This requirement is referenced in 49 Code of Federal Regulation, parts 40 and 382. Applicants must be willing and able to perform all job- related travel normally associated with this position; be willing to work hours other than on regular shifts during emergency situations; and possess a telephone in residence to receive emergency on-call duty messages. While performing the duties of this job, the employees are frequently required to stand, walk and reach; and talk and hear. Routinely, employees are required to sit; to manipulate or feel objects, tools or controls; climb or balance; and stoop, kneel, crouch or crawl. Employees must regularly lift 80 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception.Some agencies may have determined positions in this job family to be safety sensitive as defined by 63 O.S. § 427.8. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current State of Oklahoma employees must apply for open positions through their Workday account. Go to Careers app on WD home screen>Click on 'Find Jobs-Internal State of Oklahoma'.

Job Posting Title District 8 - Heavy Equipment Operator I or II Agency 345 DEPARTMENT OF TRANSPORTATION Supervisory Organization Job Posting End Date (Continuous if Blank) Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation $40,600 - Level I $47,100 - Level II Why You'll Love Working Here: * Our benefits go beyond the basics, offering annual benefit allowances, a variety of health, dental, and vision plan options, paid annual and sick leave that rolls over each year, 11 paid holidays, robust retirement savings plans, and an EAP & wellness program to support you every step of the way. Annual Benefit Allowance: * The benefits allowance covers up to $20,538.24 for employees and their dependents to enroll in benefits. Comprehensive Insurance Plans: * The State offers several different medical, dental, and vision plans to better fit your needs. Including options to enroll in a Health Savings Account (HSA) or a Flexible Spending Accounts (FSA). Retirement Savings Plans: * Pathfinder Defined Contribution Plan: available to employees who began State employment after November 1st, 2015. * Employer matches 6% with an employee contribution of 4.5%. * Employer matches 7% with an employee contribution of 7% or above. * OPERS Defined Benefit Plan: available to returning employees who were previously enrolled in OPERS. Annual & Sick Leave (PTO): * 15 days accrued annually during the first 1-5 years of service. * 18 days accrued annually for 5-10 years of service. * 20 days accrued annually for 10-20 years of service. * 25 days accrued annually for over 20 years of service. * Sick leave: Accrued at 15 days per year Paid Holidays: * 11 paid holidays per year Longevity Pay: * Longevity payments are paid annually to eligible State employees with a minimum of 2 years of State service. Employee Assistance Program (EAP): * EAP is a cooperative effort between employees and administration to help employees gain access to professional services in resolving personal problems. Job Description Position Title: Heavy Equipment Operator I or II Department: Operations Division: 8 Report to: Road Maintenance Supervisor FLSA Status: Non-Exempt Location: 4002 N. Mingo Valley Expressway, Tulsa, OK 74116 Note: Candidates selected for positions at the Oklahoma Department of Transportation may be required to complete a pre-employment background check and drug screening before beginning employment. Some positions may also require applicants to participate in a Physical Abilities Demonstration and be rated as capable of performing the essential functions of this job family. Basic Purpose Positions in this job family are responsible for operating power equipment and performing related tasks in the maintenance and repair of highways. Typical Functions * Operates equipment or heavy machinery such as trucks, tractors, road graders, bulldozers, front- end loaders, cranes, backhoes, paint machines, semi-trailers, snow removal equipment and other equipment as needed. * Performs minor repairs and maintenance on equipment and facilities. * Repairs failures in the roadway shoulders or bridge decks. * Repairs and/or replaces signs, posts, guardrails and fences. * Provides traffic control assistance using a stop/slow sign or flag to direct highway traffic. * Applies herbicide to highway rights-of-way to control weeds and other unwanted vegetation. * Remove debris including tires, animal carcass, spilled items and other obstacles. Level Descriptor Level I This is the basic level where incumbents work under close supervision operating and maintaining power equipment and performing related unskilled and semiskilled tasks in the construction, maintenance and repair of highways. Level II This is the career level where incumbents perform skilled work at the full performance level in operating heavy equipment used in highway construction or repair and also perform a variety of routine highway maintenance duties. Knowledge, Skills, Abilities and Competencies Level I Knowledge, Skills, and Abilities required at this level include knowledge of the safe operation and or heavy machinery. Ability is required to perform manual labor; to maintain and operate power equipment; and to follow instructions. Level II Knowledge, Skills, and Abilities required at this level include knowledge of the operation and servicing of equipment or heavy machinery used in highway construction and maintenance; of materials used in highway construction and maintenance; and of proper highway traffic control during maintenance operations. Ability is required to operate heavy equipment or machinery used in highway construction and maintenance; to use highway construction and maintenance materials; to follow instructions; and to communicate effectively. Education and Experience Level I Education and Experience requirements at this level are none. Level II Education and Experience requirements at this level consist of one year of experience in operating heavy equipment. Special Requirements Possession of a valid Oklahoma driver's license at time of employment. Some agencies may require possession of a valid Oklahoma commercial driver's license, class A or B with appropriate endorsements referenced in United States Department of Transportation Title 47, Chapter 6, Section 101 et seq. at time of appointment. Persons appointed to positions at the Oklahoma Department of Transportation or the Oklahoma Turnpike Authority must possess or obtain a commercial driver's license, class A, no later than five months from the date of appointment. ODOT employees are required to have a CDL tank vehicle endorsement. Applicants must take and pass drug test prior to appointment. Such tests will be administered through the appointing agency. This requirement is referenced in 49 Code of Federal Regulation, parts 40 and 382. Applicants must be willing and able to perform all job- related travel normally associated with this position; be willing to work hours other than on regular shifts during emergency situations; and possess a telephone in residence to receive emergency on-call duty messages. While performing the duties of this job, the employees are frequently required to stand, walk and reach; and talk and hear. Routinely, employees are required to sit; to manipulate or feel objects, tools or controls; climb or balance; and stoop, kneel, crouch or crawl. Employees must regularly lift 80 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Agencies may have determined positions in this job family to be safety sensitive as defined by 63 O.S. § 427.8. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current active State of Oklahoma employees must apply for open positions internally through the Workday Jobs Hub.