Fabricator jobs in Arkansas - 87 jobs

Entry-level fabrication of hose and gasket products. Assists in utilizing a variety of tools and machinery to customize products according to customer needs. This position is safety sensitive. Accurately fabricate hose assemblies, gaskets, and related products per customer requirements. Ensure safe and effective use of shop tools and equipment. Maintain a clean, organized, and OSHA-compliant workspace. Support warehouse and delivery tasks as needed to meet customer demands. Responsibilities Use hand, measuring, and cutting tools such as tape measures and mechanic's tools. Operate shop equipment such as die press, belt slitter, and automated coupling machines under supervision. Fabricate hose assemblies, gaskets, and conveyor/drive belting per directives and specifications. Conduct warehouse inventory, move/store material using forklifts, and deliver products using company vehicles. Perform general housekeeping in compliance with OSHA standards and follow all safety and RGA procedures. Other duties as assigned. Major Challenges Learning and safely operating a wide variety of tools and machines. Maintaining quality and consistency under production timelines. Adhering to safety guidelines in a physically demanding environment. Skills and Qualifications • Ability to perform duties successfully using reasoning, communication, and problem-solving skills. • Follow verbal and written directions with attention to detail and timeliness. Authority • Act Alone: o Pull tickets and complete orders o Verify task completion and equipment readiness o Check product quality before release • Touch Base with Supervisor: o Request additional materials or supplies o Coordinate project deadlines and priorities • Need Approval from Supervisor: o Authorize overtime or shift changes o Adjust production priorities as needed Evaluation Criteria Work Product & Productivity Dependability & Attitude Cooperation, Communication & Initiative Problem Solving, Trust & Leadership Safety & Policy Compliance Education and Experience • Preferred: High School Diploma or equivalent Certificates/Licenses/Registrations • Must have a valid, active Driver's License with an insurable driving record Travel • None required Physical Demands Ability to occasionally lift up to 50 lbs. Ability to safely use potentially dangerous equipment. Occasionally required to sit; must be able to stand, climb, stoop, crouch, reach, walk, and bend. Must be able to travel by car. Must be able to talk and hear. Must be able to read and speak English Work Environment Subject to both inside and outside environmental conditions. Regularly exposed to moving mechanical parts and fumes or airborne particles. Frequently exposed to uncomfortably hot or cold temperatures. Occasionally exposed to toxic or caustic chemicals, risk of electrical shock, risk of radiation, and very loud noise levels.

Job DescriptionDESCRIPTION At Multi-Craft Contractors, Inc. (MCC), we believe that people are the greatest asset of any company. We also believe that our clients deserve the highest quality workmanship and customer service that we can offer. Since 1972, MCC has been dedicated to providing the best opportunities for success. Our reputation is based on the collective skills and abilities of our people. With hundreds of highly qualified craftsmen working across a diverse range of client markets-including government, healthcare, industrial, and education-MCC has expertise in all project areas. Whether it's cost-effective solutions to meet your requirements or innovative ways to improve operational performance by increasing productivity-MCC's experts are there every step of the way to deliver measurable value, while working with the highest safety standards. MCC is currently seeking a FABRICATOR in structural steel or sheet metal. Individual will be responsible for the layout, saw cut, shear, cope, bend, drill, punch, weld and otherwise fabricate various metal components out of structural shapes (I-beams, square tubes, angles, flat plates, pipe and solid rounds, while utilizing various types of welding techniques and fabrication procedures. ESSENTIAL DUTIES Prior to welding layout, position, align, and secure parts as individual structural components and complete assemblies; if working with sheet metal will be required to use straight edges, calipers, combinations squares, framing squares, and rulers. Align and fit parts according to specifications, using various clamps, wedges, drift pins, pry bars, and hammers, etc. Position, align, fit, and weld to form complete units or subunits, following blueprints, and layout specifications, using jigs, welding torches, and hand tools. Set up and operate fabrication machines, such as saws, rolls, shears, flame cutters, iron workers, grinders, and drill presses, to bend, cut, form, punch, drills; form and assemble metal components. Weld components in flat, vertical, and overhead positions when necessary Weld separately, or in combination, using, aluminum, stainless steel, carbon steel, and other occasionally alloys. Be proficient in MIG (GMAW), TIG (GTAW), and Stick (SMAW) as required Capable of working around and using overhead cranes and rigging, as needed. Maintain good housekeeping habits Turn in all time, required paperwork; to include vendor tickets, and material requisitions Operate equipment in a safe manner Operate heavy equipment and machinery in the performance of the essential duties Work with and around hazardous materials, as well as at heights and in confined spaces in the performance of these essential duties Drive a vehicle to various job-sites throughout working hours Maintain valid driver's license and driving record that meets company policy Work in a constant state of alertness and in a safe manner Regular attendance and punctuality are essential for employee job performance Perform other duties as assigned RequirementsENVIRONMENT, PHYSICAL AND MENTAL REQUIREMENTS Exposure to varying indoor and outdoor conditions, loud noise,dust, toxic chemicals and materials, varying fumes or odors; slippery or uneven walking surfaces; and work in ditches/excavations Work at heights, such as by working on ladders, scaffolds, platforms, tops of single and multi-story buildings, as well as working in confined spaces such as underneath single story and multi-story buildings Must be able to lift and carry up to 75 lbs Must be able to perform manual and repetitive tasks and body movements including climbing, lifting, reaching, stooping, bending, walking, standing, and carrying; moving materials and manipulating things Must be able to work in overhead structures and around and beneath machinery Considerable physical effort of hands and arms required; the employee must occasionally lift and/or move objects with considerable weight Must be able to complete job duties proficiently while adapting to changing demands and priorities Must have the ability to work in a constant state of alertness and concentrate for long periods of time to perform duties in a safe manner This position is subject to ergonomic testing SAFETY SENSITIVE This position is designated as a safety sensitive position because it includes as part of the job duties operating a motor vehicle, the operating, maintaining, and monitoring of heavy equipment and machinery, and working with and around hazardous materials, at heights, and in confined spaces. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of the employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while operating a motor vehicle, operating, maintaining, and monitoring heavy equipment and machinery, and while working with and around hazardous materials, at heights, and in confined spaces. SKILLS AND COMPETENCIES High school diploma or general education degree (GED) preferred Must possess strong mathematical skills and demonstrate a competency in the use of fractions and decimals. Proficient at reading a tape measure and angle finders with occasional need for calipers Possess a good working knowledge of heat related stresses and warping properties, pertaining to the assembly and weld out of various shapes and metal types, as required to achieve acceptable craftsmanship of fabricated items Must understand bend angles and degrees; with proper allowances for metal thicknesses Be competent at calculating metal stretch-outs and circumferences Be competent at deburring, grinding, finishing and polishing, of raw edges, welds and joints of fabricated items Develop good analytical skills and attention to detail, with the ability to read and interpret blueprints and shop drawings Visualize objects in three dimensions from flat layout drawings Understand cuts, copes, miters, takeoffs and allowances Working knowledge of stair runs and risers in relation to design and structural platforms All employees must provide and maintain the required tool inventory for this position Understanding OSHA regulations, codes, and ergonomics as it pertains to stairs and platform applications Qualified safe operation in overhead cranes, rigging, and lifting practices Must be able to work in a team environment Ability to communicate clearly with other employees Good organizational and time-management skills Ability to complete daily tasks with limited supervision and minimal errors requiring re-work Ability and willingness to work overtime and non-standard schedule: nights, weekends and holidays as/if required A current valid driver's license is required BENEFITS MCC offers a comprehensive benefits package to include some of the following: Medical, Dental, Vision Basic and Optional Life Insurance, Accidental Death & Disability 401k Retirement Paid Time Off Paid Holidays Wellness Programs Education Assistance

Job DescriptionDescription: ob Purpose: The Welder Helper will assist the welders in various tasks related to metal fabrication and welding operations. The ideal candidate will support the welding team by preparing materials, maintaining equipment, and ensuring a safe and efficient work environment. Key Responsibilities: · Assist welders in setting up and operating welding equipment · Prepare materials for welding by cleaning, cutting, or grinding metal surfaces · Transport tools, materials, and equipment to and from work areas · Maintain cleanliness and organization of the worksite · Monitor welding operations to ensure safety and quality standards are met · Perform basic measurements and mark materials for cutting or welding · Help with post-welding tasks such as inspecting welds and cleaning finished products · Follow safety protocols and wear appropriate protective gear at all times Requirements: Required Skills/Abilities: · Understanding of welding processes, tools, and safety procedures · Ability to work with hand and power tools, and assist in equipment setups · Capable of lifting heavy materials, standing for extended periods, and working in various environmental conditions · Ability to follow instructions precisely and ensure quality in material preparation and cleanup · Familiarity with measuring tools such as tape measures, calipers, and squares · Knowledge of workplace safety standards and the ability to identify and avoid hazards · Ability to work effectively with welders and other crew members · Efficient in completing tasks within deadlines and maintaining productivity Education and Experience: · High School diploma or equivalent preferred · Previous experience in a construction or metalworking environment is a plus · Willingness to learn and grow within the welding trade Physical Requirements: · Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. · May involve working outdoors or in industrial environments · Exposure to heat, noise, and fumes · Use of protective equipment such as gloves, goggles, and welding masks · Must be able to bend at waist and knees and stand for extended periods of time. · Must be able to lift 25 pounds when necessary. · This is a safety sensitive position.

Job Description: FittersA fitter is responsible for the layout and assembly of fabricated parts in accordance with shop drawings using AISC and AWS standards. Pay: $23.00 - 25.00 Essential Duties and Responsibilities Lays out, position, align and fit together fabricated parts of structural metal products in the shop, according to blueprint and layout specifications, preparatory to welding or riveting. Locates and marks centerline and reference points onto floor or face block and transposes them to work piece. Moves parts into position, manually or by hoist/overhead crane. Aligns parts and make ready for final assembly. Adheres to all company safety and OSHA regulations. The ability to work overtime and regular, punctual attendance is required. Performs non-essential duties as needed. Minimum Qualifications High School diploma or equivalent with a certificate from Vo-Tech or Trade school in mechanics. Must be able to fit most structural steel including beams, columns, braces, and simple frames. Must have ability to fabricate any item produced by Prospect Steel. Must have ability to pass Class B welding test which may include 1G FCAW, 3G FCAW, 4G FCAW, 1G SMAW, 3G SMAW, 4GSMAW, and 1G SAW. Excellent math skills required. Ability to pass a tape measure test is required. Safety & Environmental Factors: All employees are expected to adhere to the company's safety policies to maintain a safe and healthy work environment. This role involves working under extreme hot or cold conditions and requires the physical ability to stand for the entire shift, use hands for various tasks, ascend stairs, balance, stoop, kneel, crouch, talk, and hear. Team members must occasionally lift items weighing up to 50 lbs. Specific vision abilities required include close, distant, and peripheral vision, depth perception, and the ability to focus. BenefitsAs part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: Medical Coverage Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits * Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. #ZR #TLRS

Quanex is looking for a Welder - 1st Shift to join our team located in Trumann, Arkansas We are seeking a skilled welder to perform duties involved in welding roof scuttles, sidewalk doors and other products in the Architectural product line, primarily standard products. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Welder position? * Supportive and collaborative culture * Growth Potential * Team-Oriented Environment * Ability to make an impact * Work Hours: 6:30 am to 3:00 pm What Success Looks Like: * Review drawing to double-check dimensions of unit, and to determine placement of hinges, lock, cover and frame, reinforcing, etc. * Move parts on to table. * Position stiffeners, reinforcements, shoes, etc. and weld following standard welding procedures for steel or aluminum. * Move completed unit to appropriate designated area. * Operate MIG welding machine. Use hammer, chisel, wire cutters, ruler, clamps as appropriate. * Move parts and completed unit weighing up to 300# ten feet to the table, then ten feet to the aisle. * Comply with all the Safety requirements established for the assigned area. * Knowledge in use of welding, bending and other power and hand tools. * Job involves repeated bending and twisting of body in order to position and hold parts to be welded, and long periods of standing in one place. * Use of reading and writing. Knowledge of basic math. * Ability to follow instructions. * Be knowledgeable about and comply with all ISO 9001 standards applying to position. * Follow all plant safety rules and regulations. * Meet all quality control standards. * Meet productivity standards set up for the position. * Meet attendance and punctuality requirements. * Properly maintain all assigned equipment. * Keep work areas are clean and maintain 5 S standards. * Ability to safely move around the shop floor. * Perform any and all other duties as assigned by Supervisor. What You Bring: * 3-5 years of experience in welding of stainless steel and/or aluminum parts * Ability to read, write and perform basic math * Availability to work overtime as needed The hourly wage for this position is $19.00 - $23.00 per hour. Pay will be commensurate with your experience; a welding test will be administered as part of the interview process. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #QTC

Job Responsibilities: Repair factory equipment and other industrial machinery, such as conveying systems, production machinery, screens, motors, and crushers. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Perform welding and fabrication skills. Comply with safety regulations and maintain clean and orderly work areas. For consideration for this position, apply online: ************************************** Job Type: Full-time Required experience: Maintenance: 1 year WELDER City: Gravette Quarry at Sulphur Springs - State: Arkansas Part of the privately-owned Kemp Quarries group of companies, is a leading producer and supplier of construction aggregates, consisting primarily of crushed stone, sand and gravel spanning NE Oklahoma, SW Missouri and NW Arkansas. Job Description Summary • Adhere to and follow all safety rules and regulations of MSHA / DOT and company. • Conduct daily safety and equipment inspections. • Welding and fabrication • Communicate with shop regarding all repairs. • Other duties as assigned. Qualifications • Must pass a drug screen and criminal background check. • Welding certificate required. • Must maintain a safe driving record and have a valid driver's license. CDL beneficial. • Flexibility to work various schedules, primarily day shift, may travel to various work locations. • Must be reliable and hard-working. • Ability to operate varied types of heavy equipment. • May be required to complete DOT physical or MSHA certification. • This job has no supervisory responsibilities. • Presents numerical data effectively. • Able to read and interpret written information. Education • High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Required Skills • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and write routine reports and correspondence. • Ability to add, subtract, multiply, and divide in all units of measure. • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. • Priorities and plans work activities; Uses time efficiently. • Accepts responsibility for own actions. • Follows through on commitments. • Demonstrates accuracy and thoroughness in completing work. Monitors own work to ensure quality • Strives to complete work in timely manner. • Treats others with respect and consideration. Experience • Three (3) years previous welding experience with heavy equipment and/or rock crushing equipment. • Majority of experience in public works, crushing and/or construction industry, heavy equipment or maintenance facilities. • Remove and install parts, disassemble and assemble components, and test and adjust assemblies with minimal supervision. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. The Benefits to You • A culture that values and provides loyalty and commitment • Competitive pay • Comprehensive medical, dental, vision and short term disability programs • 401(K) with company match • Vacation

Were seeking skilled Fabricators/Welders/Tube Welders for exciting projects in select cities across the US. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $18 - $26 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Heres what Skillit needs from you: 2-5 years of experience in fabrication, welding, or a related field. Proficient in reading a tape measure and technical drawings. Strong attention to detail and commitment to quality workmanship. Ability to clean and prepare parts effectively before fitting and welding. Experience in verifying parts and materials for accuracy. Must pass multiple welding tests, including Flux Core, Spray, and Short Circuit. Willingness to work long hours and adhere to a punctual work schedule. Heres what youll be doing: Perform fitting, welding, and modification tasks on various materials and components. Operate machinery and tools safely and efficiently. Clean and prepare parts prior to fitting and welding Read and interpret technical drawings and specifications. Verify the accuracy of parts and materials before commencing work. Collaborate with team members to ensure project goals are met. Maintain a clean and organized work environment. RequiredPreferredJob Industries Other

Local HVAC and Sheet Metal company seeking an experienced MIG Welder and sheet metal fabricator. The ideal candidate : Ability to read blue prints Must be able to pass a 90 day drug screening Have a valid driver's license

The Levy Group of Companies is seeking 2 certified Slag Pot Welders to work at our LNYS location in Blytheville, AR. The Slag Pot Welder performs all welding functions for the purpose of repairing and maintain slag pots, buckets, ground engaging edges, and other equipment. Pay: Shift: days Benefits Competitive benefits package including Medical, Dental, Prescription, 401(K) with 3% Employer Contribution, Long- and Short-term Disability Tuition Reimbursement for qualified skilled trade programs Student Loan Repayment Program Employee Referral Program Responsibilities The Slag Pot Welder will: Inspect slag pots to determine necessary repairs Examine and document damage prior to starting repair (i.e. written and photographed) Operate and maintain all welding machinery and torch cutting equipment Make recommendation as to the method of repair Weld cracks/washes according to welding procedures Maintain documents relating to labor and materials used Requisition necessary welding rods and gasses required for repair Repair bucket damage, replace cutting edge on equipment, and repair minor cracks in equipment Meet customer service expectations Perform other duties as assigned by supervisor Skills The ideal candidate will have: Ability to Lift up to 50 lbs. Ability to operate tools (grinding, discs, hand tools) Ability to work outside and tolerate noise and temperature variations Knowledge of welding materials Ability to weld, cut and fabricate Basic mechanical skill and ability to use hands to manipulate tools Good verbal and written communication skills Climb, sit, stand, bend, kneel, stoop for extended periods of time Willingness to perform other duties as assigned To Apply Please submit your resume Who is Edw. C. Levy? We are a unique, 100-year-old family-owned company that transforms our recycled products into construction materials, lightweight aggregates, asphalt, cement, concrete, agricultural products, and more. We provide steel mill services, flame cutting and treatment, road building, logistics, laboratory testing, and a variety of other solutions for our customers. The Levy Group of Companies is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, veteran status or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. The Levy Group of Companies makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 47 U.S. states, Puerto Rico, Europe, and Mexico. The Partnership's midstream operations include an extensive network of approximately 9,500 miles of pipeline and over 100 terminals. This critical infrastructure complements the Partnership's fuel distribution operations, which serve approximately 10,000 convenience stores, independent dealers, commercial customers, and distributors. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Position Summary: This position is subject to pre-employment and random DOT drug testing. The Pipeline Welder Trainee is responsible for performing certified pipeline welding duties, shop welding and fabrication, as well as other non-welding tasks related to general pipeline maintenance and repair. This role requires a strong focus on safety, quality, and adherence to industry and company standards. Major Accountabilities: * Perform welding activities related to the repair and maintenance of pipeline and facility assets, ensuring welds meet visual and NDE inspection standards. * Safely operate welding truck and equipment, traveling between job sites on various road types. * Operate hand tools and welding equipment, including beveling machines, torches, grinders, and other related tools. * Carry out pipeline maintenance tasks, including line locating, exposing pipe, lifting and transporting materials, coating application/removal, pipe surface preparation, and general maintenance. * Respond to high-priority and emergency situations, minimizing risks to personnel, public safety, and the environment. * Maintain company tools, equipment, and materials, ensuring proper storage, cleanliness, and safe operation. * Support pipeline/terminal welding and maintenance activities by participating in hot work permits, Job Safety Analyses (JSAs), and following company welding procedures and standards. * Perform terminal and pipeline asset repairs, including coating and wrapping pipe, following damage prevention procedures such as safe excavation practices. * Assist with additional tasks such as operating hand tools, line locating, pigging, line marking, light vehicle maintenance, fire watch, ditch maintenance, and housekeeping duties. * Maintain all required welding certifications and Operator Qualifications (OQ). * Comply with all company policies, OSHA, DOT, and safety regulations during all activities. Education Requirement: * High school diploma or equivalent required. * A technical degree in Welding Technology is preferred; however, relevant work experience will be accepted in lieu of a degree. * A CDL (Commercial Driver's License) is required, or the ability to obtain one within 12 months of hire. * The employee must pass and maintain all in-service and multi-qualification welding certifications per API 1104 and 1107 within 12 months of hire. Experience Requirement: * At least 1 year of direct welding experience is required. * Experience with pipeline terminal operating systems or other related industries preferred, demonstrating maturity and safe work habits in an industrial environment. * Entry-level skill in welding required. * Competence in intermediate math. * Ability to read blueprints, construction documentation, and create as-built drawings. * Knowledge of safe hot work practices, with the ability to learn and interpret confined space regulations and DOT pipeline safety regulations. * Prior terminal, pipeline, tank truck, or oilfield-related experience is helpful. * Must be available to respond to emergency after-hour calls, including weekends and holidays, and be willing to travel overnight 70-80% of the time. * Must possess a valid driver's license, maintain a clean driving record, and be able to operate company vehicles for extensive travel. * Basic office and computer skills are a plus. * Candidates with additional relevant experience may be considered for a higher-level position. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. * Climbing ladders, scaffolding, and stairs at various heights. * Lifting and carrying objects up to 50 lbs., with the ability to lift up to 100 lbs. with assistance when needed. * Walking over various types of terrain, including inclines. * Working in crouching, bending, stooping, twisting, and kneeling positions for extended periods. * Standing for extended periods and sitting as needed. * Ability to work in awkward or restrictive positions for extended periods. * Wearing required personal protective equipment (PPE), such as safety shoes, safety glasses, hard hat, flame-resistant clothing, hearing protection, respirator, and fall protection. * Working in various environmental conditions, including exposure to all types of weather, such as extreme heat, cold, and precipitation.

Systems, LLC, an affiliate of Chamberlain Group, is a U.S.-based manufacturer of loading dock equipment-marketed under the Poweramp, DLM, and McGuire brands. With manufacturing facilities in Germantown, Wisconsin and Malvern, Arkansas, all products are designed and produced in the USA using lean manufacturing techniques. We strive to recruit the best talent in the industry and give employees opportunities for continuing education and training to help them advance in their careers. This is a role within Systems' Manufacturing and Production group. A successful incumbent is expected to (i) Weld and assemble different pieces by using hand held and robotic welding equipment such as hand tools, clamps, jigs, and fixtures; utilize different materials (plate steel, sheet steel, structural steel, and tubing), and (ii) Prepare and complete manual and robotic welding work on materials by welding, cutting, grinding, and cleaning metal. Associate II, Welder Overview: • Weld and assemble different pieces by using hand held welding equipment such as hand tools, clamps, jigs, and fixtures; utilize different materials (plate steel, sheet steel, structural steel, and tubing) • Prepare and complete work on materials by welding, cutting, grinding, and cleaning metal • Test and inspect welded components to ensure they meet set specifications before moving to the next department • Work from different specifications and shop orders • Utilize ruler, square, templates, and gauges to take and read measurements • Operate cranes, hoists, and lift tables • Report damages on machines and equipment; maintain equipment in a condition that does not compromise safety • Report all unsafe conditions to management • Monitor/control the robotic welding process • Operate robotic welding equipment to perform welding tasks • Perform visual inspection of weld quality • Program robotic welding systems • Provide work reports/feedback to supervisors or engineering teams • Set up/prepare robotic welding equipment for operation • Troubleshoot/resolve and recover from potential technical issues that may arise • Performs other duties and/or responsibilities as assigned by supervisor • Comply with health and safety guidelines and rules; managers should also ensure compliance across their teams. • Protect Chamberlain Group's and Systems' reputation by keeping information confidential. • Maintain professional and technical knowledge by attending educational workshops, reading professional publications, establishing personal networks, and participating in professional societies. • Contribute to the team effort by accomplishing related results and participating on projects as needed Associate II, Welder Qualifications No minimum education required 1+ year of robotic welding experience required Basic knowledge of MIG welding, handheld plasma machines and cutting torches using cutting steel, acetylene and other cutting methods Basic knowledge of welding techniques, material characteristics, and structural fundamentals Preferred Qualifications: Recognized robotic welding certification, Prior experience with solid core wires and argon/oxygen welding gasses, Prior experience MIG welding of structural steel and plate, 3-5 years experience loading, operating and welding in a robotic welding environment Share our immediate openings with your circle of friends, business Associates and family members. We have awesome opportunities #LI-Onsite #LI-JE1 The pay rate for this position is $21.50/hr. Base pay offered may vary depending on a number of factors including, but not limited to, the position offered, location, education, training, and/or experience. In addition to base pay, also offered is a comprehensive benefits package and 401k contribution (all benefits are subject to eligibility requirements). This position is eligible for participation in a short-term incentive plan subject to the terms of the applicable plans and policies. Chamberlain Group wants all of its employees to succeed and encourages people of all backgrounds to apply. We're proud to be an Equal Opportunity Employer, and you'll be considered for this role regardless of race, color, religion, sex, national origin, age, sexual orientation, ancestry; marital, disabled or veteran status. We're committed to fostering an environment where people of all lived experiences feel welcome. Persons with disabilities who anticipate needing accommodations for any part of the application process may contact, in confidence **************************. NOTE: Staffing agencies, headhunters, recruiters, and/or placement agencies, please do not contact our hiring managers directly.

Fabricate, build, and Cover soft goods through the knowledge and skills of aircraft upholstery via Dassault Falcon Jet standards. Use of drawings, blueprints, Design drawings, and/or spec control prints following Dassault Quality standards. Soft goods include Passenger and Crew area panels, Headliners, Window panels, and other assorted interior soft goods PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): A Upholstery Fabrication Technician- III will: Perform daily maintenance of equipment Perform Upholstery fabrication activities in accordance with Dassault Falcon Jet "F" standards. Fabricate upholstery aircraft parts using Dassault standards of quality. Successfully perform rework at the aircraft on seats, curtains, or panels Comply with Customer Specification / IFS description. Operate and adjust necessary machinery. Comply with daily maintenance of the machines. Interpret blueprints, completion drawings, company standards, work instructions, 3D model information. Perform proper practices in accordance to DFJ FPS, "F" standards and Quality standards, such as proper glue application, adhesive bonding, and hardware. Correct handling and use of all required tools specific to the current job assignment. Correct handling and use of all required chemicals and adhesives related to the current job assignment, including general knowledge and ability on retrieving data from the MSDS safety books. Propose and support Continuous Improvement practices to management and co-workers Embrace ACE values Mentor junior employees NON-PRINCIPAL DUTIES/RESPONSIBILITIES (NON-ESSENTIAL FUNCTIONS): Perform all other duties as assigned. MINIMUM REQUIRED QUALIFICATIONS: High school diploma or equivalent Minimum 3 years of experience in upholstery fabrication or related. Strong desire to learn and attention to detail Must be proficient in 3 areas of upholstery foam and application of upholstery with little or no rework Consistently perform at expected standards of safety, quality, schedule, and cost. Must possess the ability to apply foam to the seat frames, upholster seats headrest/backrest/armrest, window panels, divan, and crew seating components Work within engineering and industrial definition using pattern data, company standards, and work instructions. Select correct material from the Specification and CAMS orders and record lot numbers Must not be allergic to chemical, solvents, paints, adhesives, natural or manmade materials, fabrics, or feathers. Basic computer skills. Able to interpret a variety of instructions furnished in written, oral, or diagram form. Able to work in confined spaces and in unusual positions. Able to lift and transport up to 40 lbs. with or without reasonable accommodation Visual capacity and muscular dexterity to work on fine detail, high cost products with a minimum of errors and rework. Able to stock and remove materials from bins above storage level according to OSHA standards. Must be able to differentiate colors Ability to train peers or new employees ADDITIONAL DESIRED QUALIFICATIONS: Aircraft upholstery fabrication experience Ability to solve practical problems when needed. Manufacturing, vocational, tech school training, and/or related college credits. Computer and/or software training or experience. Able to work from documentation such as MES, FPS, WI, blueprints, drawings, F-standards, preparation packages, etc. Courses in state or federal vocational technical upholstery programs WORKING CONDITIONS: Factory/manufacturing environment subject to high noise levels, adhesive or chemical odors, dust, and normal climate control. COMPENSATION AND BENEFITS: The compensation for this position typically falls between $21 and $28 per hour. This position is eligible for overtime. This position may be eligible for a shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Full-time Description ob Purpose: The Welder Helper will assist the welders in various tasks related to metal fabrication and welding operations. The ideal candidate will support the welding team by preparing materials, maintaining equipment, and ensuring a safe and efficient work environment. Key Responsibilities: · Assist welders in setting up and operating welding equipment · Prepare materials for welding by cleaning, cutting, or grinding metal surfaces · Transport tools, materials, and equipment to and from work areas · Maintain cleanliness and organization of the worksite · Monitor welding operations to ensure safety and quality standards are met · Perform basic measurements and mark materials for cutting or welding · Help with post-welding tasks such as inspecting welds and cleaning finished products · Follow safety protocols and wear appropriate protective gear at all times Requirements Required Skills/Abilities: · Understanding of welding processes, tools, and safety procedures · Ability to work with hand and power tools, and assist in equipment setups · Capable of lifting heavy materials, standing for extended periods, and working in various environmental conditions · Ability to follow instructions precisely and ensure quality in material preparation and cleanup · Familiarity with measuring tools such as tape measures, calipers, and squares · Knowledge of workplace safety standards and the ability to identify and avoid hazards · Ability to work effectively with welders and other crew members · Efficient in completing tasks within deadlines and maintaining productivity Education and Experience: · High School diploma or equivalent preferred · Previous experience in a construction or metalworking environment is a plus · Willingness to learn and grow within the welding trade Physical Requirements: · Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. · May involve working outdoors or in industrial environments · Exposure to heat, noise, and fumes · Use of protective equipment such as gloves, goggles, and welding masks · Must be able to bend at waist and knees and stand for extended periods of time. · Must be able to lift 25 pounds when necessary. · This is a safety sensitive position.

Job Description: Structural Welder The Welder Class B is responsible for welding material according to specifications of job orders. This position is deemed ‘safety sensitive' due to the fact that a person improperly performing the essential or marginal functions of the job would constitute a threat to the health or safety of the employee, the employee's co-workers, and/or the public at large. Pay: $23.00 - $ 25.00 Essential Duties and Responsibilities Receive and understand welding symbols and select proper welding material needed to finish for fitting, painting, and shipping. Locate pieces approved by Quality Control for welding. Gather equipment necessary to complete the job. Clean welded pieces for next phase of processing. Responsible for adhering to all company safety and QA/QC programs and OSHA regulations. The ability to work overtime and regular, punctual attendance is required. Perform non-essential functions as needed. Minimum Qualifications Minimum of two years' welding experience required. Must be able to read and comprehend welding symbols and instructions. Must be able to read and understand structural drawings. Must be able to pass a tape measure test. Must have ability to pass an unlimited thickness groove plate test in the vertical and overhead positions using FCAW and SMAW. Must be able to carbon arc gouge the back side of butt joints to sound metal. Safety & Environmental Factors: All employees are expected to adhere to the company's safety policies to maintain a safe and healthy work environment. This role involves working under extreme hot or cold conditions and requires the physical ability to stand for the entire shift, use hands for various tasks, ascend stairs, balance, stoop, kneel, crouch, talk, and hear. Team members must occasionally lift items weighing up to 50 lbs. Specific vision abilities required include close, distant, and peripheral vision, depth perception, and the ability to focus. BenefitsAs part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes: Medical Coverage Dental Coverage Vision Coverage Short Term Disability Benefits Term Life Benefits * Note: The specific duties, skills and qualifications may vary depending on the company's requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law. #ZR #TLRS

Salary: WELDER Job Responsibilities: Repair factory equipment and other industrial machinery, such as conveying systems, production machinery, screens, motors, and crushers. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Performwelding and fabricationskills. Comply with safety regulations and maintain clean and orderly work areas. For consideration for this position, apply online: ************************************** Job Type: Full-time Required experience: Maintenance: 1 year WELDER City: Gravette Quarry at Sulphur Springs - State: Arkansas Part of the privately-owned Kemp Quarries group of companies, is a leading producer and supplier of construction aggregates, consisting primarily of crushed stone, sand and gravel spanning NE Oklahoma, SW Missouri and NW Arkansas. Job Description Summary Adhere to and follow all safety rules and regulations of MSHA / DOT and company. Conduct daily safety and equipment inspections. Welding and fabrication Communicate with shop regarding all repairs. Other duties as assigned. Qualifications Must pass a drug screen and criminal background check. Welding certificate required. Must maintain a safe driving record and have a valid drivers license. CDL beneficial. Flexibility to work various schedules, primarily day shift, may travel to various work locations. Must be reliable and hard-working. Ability to operate varied types of heavy equipment. May be required to complete DOT physical or MSHA certification. This job has no supervisory responsibilities. Presents numerical data effectively. Able to read and interpret written information. Education High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Required Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and write routine reports and correspondence. Ability to add, subtract, multiply, and divide in all units of measure. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Priorities and plans work activities; Uses time efficiently. Accepts responsibility for own actions. Follows through on commitments. Demonstrates accuracy and thoroughness in completing work. Monitors own work to ensure quality Strives to complete work in timely manner. Treats others with respect and consideration. Experience Three (3) years previouswelding experience with heavy equipment and/or rock crushing equipment. Majority of experience in public works, crushing and/or construction industry, heavy equipmentor maintenance facilities. Remove and install parts, disassemble and assemble components, and test and adjust assemblies with minimal supervision. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. The Benefits to You A culture that values and provides loyalty and commitment Competitive pay Comprehensive medical, dental, vision and short term disability programs 401(K) with company match Vacation

Were seeking skilled Fabricators/Welders/Tube Welders for exciting projects in select cities across the US. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $18 - $26 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Heres what Skillit needs from you: 2-5 years of experience in fabrication, welding, or a related field. Proficient in reading a tape measure and technical drawings. Strong attention to detail and commitment to quality workmanship. Ability to clean and prepare parts effectively before fitting and welding. Experience in verifying parts and materials for accuracy. Must pass multiple welding tests, including Flux Core, Spray, and Short Circuit. Willingness to work long hours and adhere to a punctual work schedule. Heres what youll be doing: Perform fitting, welding, and modification tasks on various materials and components. Operate machinery and tools safely and efficiently. Clean and prepare parts prior to fitting and welding Read and interpret technical drawings and specifications. Verify the accuracy of parts and materials before commencing work. Collaborate with team members to ensure project goals are met. Maintain a clean and organized work environment. RequiredPreferredJob Industries Other

Local HVAC and Sheet Metal company seeking an experienced MIG Welder and sheet metal fabricator. The ideal candidate : Ability to read blue prints Must be able to pass a 90 day drug screening Have a valid driver's license

Job Description The Welder is responsible for permanently fitting and welding of various metals to include but not limited to; steel, aluminum, and stainless steel parts using high heat application to form a permanent bond. May specialize in one of hundreds of different processes of welding to join metals together. Certification may be required depending of job specifications. ESSENTIAL DUTIES Read blueprints and drawings and take or read measurements to plan layout and procedures Be proficient in MIG (GMAW), TIG (GTAW), and Stick (SMAW) as required Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) Repair machinery and other components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Determine welding position and type of metal to be fused Ensure welds meet standards and specifications Supervise machines or robots that perform automated welding tasks Operate heavy equipment and machinery in the performance of these essential duties Work with and around hazardous materials, as well as at heights and in confined spaces in the performance of these essential duties Drive a vehicle to various jobsites throughout working hours a. Maintain valid driver's license and a driving record that meets company policy Work in a constant state of alertness and in a safe manner Regular attendance and punctuality are essential for employee job performance Perform other duties as assigned ENVIRONMENT, PHYSICAL AND MENTAL REQUIREMENTS Exposure to varying indoor and outdoor conditions, loud noise, dust, toxic chemicals and materials, varying fumes or odors; slippery or uneven walking surfaces; and work in ditches/excavations Work at heights, such as by working on ladders, scaffolds, platforms, tops of single and multi-story buildings, as well as working in confined spaces such as underneath single story and multi-story building Must be able to perform manual and repetitive tasks and body movements including standing and/or walking for long periods of time, bending, reaching, and/or gripping frequently, climbing, pulling and pushing Must be able to lift up to 125lbs May lift and carry heavy objects, stoop, kneel, crouch, or crawl in awkward positions Must be able to complete job duties proficiently while adapting to changing demands and priorities Must have the ability to work in a constant state of alertness and concentrate for long periods of time to perform duties in a safe manner This position is subject to ergonomic testing SAFETY SENSITIVE This position is designated as a safety sensitive position because it includes as part of the job duties operating a motor vehicle, operating, maintaining, monitoring of heavy equipment and machinery, and working with and around hazardous materials, at heights, and in confined spaces. This position is one in which a lapse of attention could result in injury, illness, or death. For the safety of the employee and others, the employee must be able to work in a constant state of alertness and concentrate for long periods of time while operating, maintaining, and monitoring heavy equipment and machinery, and while working with and around hazardous materials, at heights, and in confined spaces. SKILLS AND COMPETENCIES High school diploma or general education degree (GED) preferred Minimum 1 year of experience or schooling is preferred Welders certification may be required depending of job specifications Knowledge of welding, structural brake forming and other fabrication processes along with automated welding techniques Ability to communicate clearly with other employees All employees must provide and maintain the required tool inventory for this position Good organizational and time-management skills Ability to complete daily tasks with limited supervision and minimal errors requiring re-work Ability and willingness to work overtime and non-standard schedule: nights, weekends and holidays as/if required A current valid driver's license is required BENEFITS MCC offers a comprehensive benefits package to include some of the following: Medical, Dental, Vision Basic and Optional Life Insurance, Accidental Death & Disability 401k Retirement Paid Time Off Paid Holidays Wellness Programs Education Assistance

Were seeking skilled Fabricators/Welders/Tube Welders for exciting projects in select cities across the US. We prioritize your safety and value your expertise. We offer flexible interview times and an easy-to-follow application process. Apply now to jumpstart your skilled craft career! Salary Range: $18 - $26 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Heres what Skillit needs from you: 2-5 years of experience in fabrication, welding, or a related field. Proficient in reading a tape measure and technical drawings. Strong attention to detail and commitment to quality workmanship. Ability to clean and prepare parts effectively before fitting and welding. Experience in verifying parts and materials for accuracy. Must pass multiple welding tests, including Flux Core, Spray, and Short Circuit. Willingness to work long hours and adhere to a punctual work schedule. Heres what youll be doing: Perform fitting, welding, and modification tasks on various materials and components. Operate machinery and tools safely and efficiently. Clean and prepare parts prior to fitting and welding Read and interpret technical drawings and specifications. Verify the accuracy of parts and materials before commencing work. Collaborate with team members to ensure project goals are met. Maintain a clean and organized work environment. RequiredPreferredJob Industries Other