Fabricator jobs in Chandler, AZ

Discover your exciting role Our people are our success. As one of us, you will contribute to engineering excellence for the high-tech markets of the future, including semiconductors, batteries, pharmaceuticals, biotechnology, and data centers. At Exyte, you will be part of a global community of challenge seekers who are ambitious and passionate about innovation. Together, we will build on our company's long history and keep on leading the way to a better world. An entry-level position in a production environment with prior experience preferred. In this area you'll form sheet metal into cylindrical and conical products, prep and fabricate stainless steel pipe and fittings for welding. Explore your tasks and responsibilities Under close supervision you'll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following: • Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: grinding, rolling, seam welding, flanging, tagging; shearing. • Comply with health, safety (including OSHA), and environmental procedures, and ensure the cleanliness of the area. • Work in a team environment. • Continue to learn and expand one's own capacity within this job by increasing knowledge and skill base. • Perform various other assignments per lead person or supervisor direction. • Forklift Operation Physical Requirements • Frequent standing, sitting, and use of hands in this support role is required. • Specific vision abilities required to include close vision, and ability to adjust focus. • Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Show your expertise • Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures. • Ability to complete written documentation. • Ability to effectively communicate with co-workers and superiors. • Ability to apply basic math skills including adding and subtracting whole numbers and fractions. • Ability to accurately read a tape measure to 1/32”. • Ability to thrive in a fast-paced environment with shifting priorities • Knowledge of sheet metal layout (proper fittings), surface grinding and metallurgy. The work environment characteristics include periodic noise increases when in the Manufacturing facility, although the office environment is usually quiet and respectful. Safety glasses and other required safety protection should be worn when out in the manufacturing facility, which may vary depending on the area you are working/visiting. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. EEO Statement (USA) Recruiter to incorporate at the bottom of the job posting. Exyte US, Inc. is proud to be an Affirmative Action and Equal Employment Opportunity employer that is committed to celebrating diversity and supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Job Description Join our team and be part of a positive, friendly, and highly motivated work environment! We are looking for a skilled Sheet Metal Fabricator to join our team. We offer great benefits, career growth potential, and a supportive management team. The Sheet Metal Fabricator is responsible for fabricating ductwork and fittings while maintaining efficiency and quality standards. This role requires strong organizational skills, attention to detail, and a commitment to maintaining a safe and clean workspace. The ideal candidate will be self-driven, highly motivated, and excel in a fast-paced environment. Key Responsibilities: Review the Fabrication Board daily for priority and emergency items. Ensure all fabricated items are staged a day before the scheduled job. Maintain a 3-day lead time for Add-On Replacements and 2-day lead time for New Construction fabrication. Complete all fabrication projects on or below the allocated labor budget. Keep fabrication stock levels updated and communicate needs in a timely manner. Assist in job estimates for custom homes and special projects when requested. Maintain and service fabrication equipment, ensuring all tools and machines remain fully operational. Ensure compliance with company safety policies and participate in monthly safety training. Keep the shop area clean and organized, removing scrap and debris daily. Work closely with the warehouse team for stocking, pulling jobs, or receiving deliveries as needed. Qualifications: Minimum 2 years of sheet metal fabrication experience. Proficiency in operating plasma machines. Strong computer skills and ability to update fabrication boards. Excellent attention to detail and organizational skills. Ability to work independently and problem-solve effectively. A team-oriented mindset with a positive attitude. If you're looking for a stable, rewarding career with a company that values its employees, we'd love to hear from you! Apply today and become part of a team that prioritizes growth, teamwork, and excellence. What we Offer: Competitive Pay Excellent Benefits Package: Medical, Dental, Vision Insurance 401(k) Retirement Plan and/or Pension Paid Vacation, Sick Time, and Holidays Opportunities for Growth & Advancement Performance Incentives Employee Appreciation Events Supportive & Team-Oriented Culture Employee Development Programs & Discounts Schedule: Monday - Friday, 6:00 AM - 3:00 PM #HOW Pay Range$25-$32 USD Howard Air For more than 30 years, Howard Air has focused on providing the latest technology in superior comfort to meet our customers' air conditioning and heating needs. When you join us, you will proudly be a part of an exclusive group of the highest trained and top earning professionals in the HVAC industry. Earn the most you've ever made in the HVAC industry while enjoying flexible work schedules for an unbeatable work/life balance, along with the best tools, equipment, vehicles, and facilities in the industry. We are an equal-opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Privacy Policy

Discover your exciting role Our people are our success. As one of us, you will contribute to engineering excellence for the high-tech markets of the future, including semiconductors, batteries, pharmaceuticals, biotechnology, and data centers. At Exyte, you will be part of a global community of challenge seekers who are ambitious and passionate about innovation. Together, we will build on our company's long history and keep on leading the way to a better world. An entry-level position in a production environment with prior experience preferred. In this area you'll form sheet metal into cylindrical and conical products, prep and fabricate stainless steel pipe and fittings for welding. Explore your tasks and responsibilities Under close supervision you'll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following: * Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: grinding, rolling, seam welding, flanging, tagging; shearing. * Comply with health, safety (including OSHA), and environmental procedures, and ensure the cleanliness of the area. * Work in a team environment. * Continue to learn and expand one's own capacity within this job by increasing knowledge and skill base. * Perform various other assignments per lead person or supervisor direction. * Forklift Operation Physical Requirements * Frequent standing, sitting, and use of hands in this support role is required. * Specific vision abilities required to include close vision, and ability to adjust focus. * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Show your expertise * Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures. * Ability to complete written documentation. * Ability to effectively communicate with co-workers and superiors. * Ability to apply basic math skills including adding and subtracting whole numbers and fractions. * Ability to accurately read a tape measure to 1/32". * Ability to thrive in a fast-paced environment with shifting priorities * Knowledge of sheet metal layout (proper fittings), surface grinding and metallurgy. The work environment characteristics include periodic noise increases when in the Manufacturing facility, although the office environment is usually quiet and respectful. Safety glasses and other required safety protection should be worn when out in the manufacturing facility, which may vary depending on the area you are working/visiting. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. EEO Statement (USA) Recruiter to incorporate at the bottom of the job posting. Exyte US, Inc. is proud to be an Affirmative Action and Equal Employment Opportunity employer that is committed to celebrating diversity and supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Job Description MMI Tank & Industrial Services - is a dynamic and growing custom steel tank & industrial equipment manufacturer. Delivering high-quality products to a wide variety of industries. We are looking to add experienced and qualified fitter-welders/fabricators to our shop production team, seeking long-term employees. Guaranteed 40hrs a week, plus overtime. Shop Welders: $20-$30 per hour Shop Fitter-Welder: $25-$30 per hour Shop Machine Operator: $30 per hour Shop General Labor: $20 per hour Shop Maintenance: $30 per hour Shipping & Receiving: $20 per hour Qualifications & Duties 3-5 years of metal fabrication experience welding in Flux-core & Mig. Tank Fabrication & welding experience. ASME Pressure Vessels API Tanks AWWA Tanks UL Tanks Custom Tanks Reliable transportation & punctual attendance. Interpret shop fabrication drawings. Perform high-quality and consistent welds daily. Read a tape measure proficiently. Maintain a clean, safe, and organized workspace. Work as part of a team and have a good attitude. Job Posted by ApplicantPro

MMI Tank & Industrial Services - is a dynamic and growing custom steel tank & industrial equipment manufacturer. Delivering high-quality products to a wide variety of industries. We are looking to add experienced and qualified fitter-welders/fabricators to our shop production team, seeking long-term employees. Guaranteed 40hrs a week, plus overtime. Shop Welders: $20-$30 per hour Shop Fitter-Welder: $25-$30 per hour Shop Machine Operator: $30 per hour Shop General Labor: $20 per hour Shop Maintenance: $30 per hour Shipping & Receiving: $20 per hour Qualifications & Duties * 3-5 years of metal fabrication experience welding in Flux-core & Mig. * Tank Fabrication & welding experience. * ASME Pressure Vessels * API Tanks * AWWA Tanks * UL Tanks * Custom Tanks * Reliable transportation & punctual attendance. * Interpret shop fabrication drawings. * Perform high-quality and consistent welds daily. * Read a tape measure proficiently. * Maintain a clean, safe, and organized workspace. * Work as part of a team and have a good attitude.

As a Welder Fabricator at Creative Environments, you will be an essential force behind our custom, high-quality designs that set us apart in the industry. With your skill and precision, you'll push the boundaries of traditional fabrication, creating innovative and truly unique pieces that bring our client's visions to life. Your dedication to excellence will strengthen our brand's reputation, while your commitment to safety and teamwork will empower a culture of collaboration and efficiency, ensuring each project's success in bold and impactful ways. Our welders / Fabricators can work in both shop and field settings. The Shop welders work mostly with aluminum and our field welders work to create, assemble, and install structures, components, and products such as frames, structural beams, gates, fences etc. Responsibilities: * Interpret technical drawings, blueprints, and specifications to determine welding and fabrication requirements. * Weld metal parts using various welding techniques (MIG, TIG, Stick, etc.) based on project needs. * Fabricate and assemble metal structures and components using a variety of hand tools, power tools, and welding equipment. * Prepare, cut, and fit metal materials for welding, ensuring accuracy in measurements and alignment. * Inspect completed work for defects or imperfections, ensuring compliance with quality standards. * Operate and maintain welding and fabrication equipment safely and efficiently. * Maintain a clean and organized work environment, adhering to safety regulations and guidelines. * Work closely with the engineering and production teams to ensure timely project completion. * Maintain a thorough understanding of welding safety practices, including the use of personal protective equipment (PPE). * Collaborate with other team members to meet production deadlines and ensure quality control. * Other duties as assigned by management

EIG Electrical Systems, as part of the DPR Family of Companies, is seeking for a motivated Welder to join our vibrant team in Surprise, AZ. Together, we'll work toward our vision of creating a brighter, more sustainable future. If you're seeking a workplace that highly values integrity, innovation, a positive work environment, and your unique talents, then you're in the right place! Learn and apply proper tool and equipment usage in completing metal work. Drill holes in metal, concrete, and masonry structure. Locate and mark reference points. Dig postholes and erect ornamental fencing. Assemble metal work, including structural ironwork and opening framing. Weld brackets to lintels, sills, columns or other structural framework. Create bolted and welded connections while erecting structural steel framing members. Bolt, clip, and weld ironwork. Bolt newel posts, balusters, and other stairway parts/rails to supports; embed in sockets. Install metal work, structural ironwork/joist/deck, and opening framing, including metal windows and door frames. Stage and sequence steel pieces according to erection plans for hoisting and framing. Measure and mark layout for installation. Set and check elevations. Connect ironwork to brackets, anchors, and existing structures. Verify installs are level and plumb. Install cover plates and molding with metal screws. Follow directions and adhere to company procedures. Apply an understanding of construction/welding terminology and industry to execute with excellence. Submit time entry daily. Comprehend and apply instructions and ask questions as needed. Remain open and flexible to changes. Seek clarity from Foreman or Leadman as needed. Manage work and self by noting work to be completed each day, completing tasks safely, demonstrating a willingness to assist with other tasks, as needed, and staying focused and motivated to build with excellence. Coordinate with other trades. Communicate with trade partners to coordinate work to be completed and ensure work flows smoothly. Escalate any issues or concerns, as needed. Required Education And Experience Experience using templates, square, transit, laser, level, plumb bob, transit, posthole digger Experience operating a welder, torch, power tools, and hand tools Experience operating off-road forklift, aerial boom, and scissor lift 5 to 10 years of Construction Welding/Fabrication experience Willing to work outside in various weather elements on large commercial construction projects Preferred Education And Experience High School Diploma Welding/Journeyman Certifications and/or Training Previous experience assembling metalwork Experience reading fabrication and erection drawings OSHA 10 or OSHA 30 training completion Willing to travel regionally as needed DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Job DescriptionJob Title: Welder Fabricator *Actively seeking Veterans and Military Spouses with at least 3 years of MIG Welding experience.* Schedule: Monday through Friday, 5:00 am to 3:30 pm (Full Time) Pay: $27-$32/hr, Based on experience. Overtime available. Company Overview: Blue United Sourcing is proud to partner with a leading work-truck upfitter specializing in fleet customization and equipment installations to hire a Welder Fabricator for their growing Arizona operation. The Phoenix-based speciality shop offers comprehensive fleet customization for customer needs- including installation of service bodies, flatbeds, trailers, specialty equipment, lighting, and more. With local manufacturing and a reputation for durable, custom-built products backed by a team of expert craftsmen, our client has been serving contractors, utility companies, government agencies and small businesses throughout Arizona and Nevada for over 30 years. Position Summary: We are seeking a dependable Welder to join the Fabrication Department! In this role, you will perform customized MIG welding and steel fabrication on things such as flatbeds, ladder racks, landscape dump bodies, and other components of work trucks. You'll use a range of welding techniques, along with hand and power tools, to assemble and fabricate parts in a fast paced, safety-focused environment. You will get to create unique, custom-builds from start-to-finish by taking a blueprint and turning it into a functional work of art! Requirements Key Responsibilities: Accurately follow blueprints, diagrams, and installation instructions MIG weld various equipment and components Use hand and power tools to assemble, fit, and mount parts on trucks and trailers Maintain an organized, hazard-free work area Collaborate effectively with team members and supervisors on-site Required Qualifications: 3+ years of experience in MIG welding and fabrication of carbon steel Valid driver's license and reliable transportation An eye for execution. Able to interpret installation diagrams and instructions Ability to learn fast and willingness to learn Experience with various hand and power tools. You must own the basic tools required for this position. A list will be provided. Strong communication and teamwork skills Able to withstand a physically demanding environment. You will be welding from all positions, at times in extreme heat. Must be able to lift at least 50lbs.

Repair and/or rebuild structurally failed or worn parts requiring welding process reconstruction. Work in adverse weather and other adverse shop and field situations presented by client needs. Accept all out-of-town assignments requiring overnight stays. Communicate orally and in writing information, instructions, and explanations to associates, clients, and management regarding conditions, problems, and recommendations. ESSENTIAL FUNCTIONS: Fabricate and/or repair metal parts. Comprehend and interpret sketches and diagrams. Operate welding equipment. Prepare service reports. Plan and control cost of repair jobs. Maintain company equipment - keep in good clean orderly condition. Work safely at all times. Adhere to all applicable safety policies. Comply with all company policies, procedures, and standards. ADDITIONAL RESPONSIBILITIES: Own and maintain required personal tools. Learn and use Empire, Caterpillar and allied product procedures and systems. Maintain current MSHA card if work area requires. Provide on-the-job training to technicians and helpers as assigned. Communicate with proper individuals to clarify instructions or discuss scope or progress of job. Work overtime as needed. Travel to remote locations as needed. Perform other related duties as assigned. Work within and promote corporate values. KNOWLEDGE SKILLS AND ABILITIES: Perform complex and innovative welding procedures. Appropriate manner, conduct, and grooming adhere to company policy. Ability to work cooperatively and communicate effectively. Able to read and correctly interpret diagrams & blueprints. Basic knowledge of heat stresses in metal. Know proper use of cleaners and solvents. Must have acceptable attendance to meet all company standards and requirements. EDUCATION AND EXPERIENCE: High school diploma or General Education Degree (GED). Current driver's license. Minimum of 6 months related experience. Current AWS D1.1 and D14.3 certification. Must be able to communicate (speak, read, comprehend, write) in English. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands, and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop and kneel. The employee is regularly required to lift and/or move up to 25 pounds and occasionally required to lift and/or move up to 50 pounds. Specific vision abilities required by this job include close, distance, and peripheral vision. May be required to operate a forklift with appropriate certification(s). Will be required to wear respirator and be cleared for respirator use by an approved medical provider. This position is designated as a "Safety-Sensitive Position". A Safety-Sensitive Position includes tasks or duties that EMPIRE in good faith believes could affect the safety or health of the employee performing the task or others. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places, and outside weather conditions. The employee is frequently exposed to wet and/or humid conditions, extreme cold, and extreme heat. The noise level in the work environment is usually loud.

MMI is an industrial contractor and steel fabricating company based in Mesa, Arizona. MMI has been in business since 1974 and continues to grow each year. We are very proud of the more than 200 loyal members of our team and are looking for individuals to contribute at a very high level. MMI is looking to hire experienced welders who have at least 5 years of experience in structural steel. Fitter/welders are involved in assembling and fitting to drawing dimensions of all kinds of structural steel. Must be able to pass a drug test. Pay range: DOE We also offer the following benefits: Health insurance, Dental, Vision, Life 401K Holiday pay Paid time off Profit Sharing Responsibilities for Welders: Must be able to read, understand and interpret structural steel drawings Communicate with Foreman and QC Have the mathematical skills to accurately fit Follow welding procedures Must be certified or able to pass a weld test Must be competent riggers able to operate heavy loads on overhead cranes Should work systematically so QC can check jobs in a prioritized fashion Follow company and jobsite safety guidelines, procedures and policies Must be willing to work overtime and Saturdays as needed Strong teamwork Have tools Welders must be physically able to: Lift and carry objects weighing more than 50 lbs. Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time Work outdoors in all weather conditions MMI has strong reason for existing. Our Purpose is “To improve the lives of MMI Employees, Customers, & Vendors” We live our Core Values every day Happy - Choose to be happy and treat others with respect. Hungry - Seek learning and create opportunities. Adapt to change. Hardworking - Be ambitious and obsessed with quality. Honorable - Demonstrate humility and integrity and put the team first. If you appreciate our purpose and embrace our core values stated above, we invite you to apply.

WHO ARE WE? Horsepower Automotive Group (HPAG), is a leader in the growing automotive aftermarket industry. When you join HPAG, you'll have a unique opportunity to be a part of our exciting and rapidly growing, multi-brand organization. Our brands include Addictive Desert Designs, DV8 Offroad, Flatline Van Co., and Rago Fabrication. We support a collaborative environment and value open participation from individuals with different ideas, experiences, and perspectives. Are you ready to be part of our future? Now located in Chandler, AZ in a brand new, state-of-the-art, climate controlled, 160,000+ sq. ft. facility. Addictive Desert Designs is a leader in the automotive aftermarket industry and is currently seeking a Welder/Fabricator. This position is eligible for our * Team Driven Bonus Program*. Summary of Key Responsibilities: The Welder/Fabricator is responsible for fabricating laser cut automated parts into welded assemblies, daily production tracking for build counts and flow, building complete assemblies from start to finish including grinding and finishing, MIG welding in quantity and may require minimal TIG welding (we offer TIG training). Responsibilities and essential job functions include, but are not limited to the following: Weld a variety of steel structures per CAD print requirements. Use a variety of basic manufacturing tools as needed per job specifications. Read and understand product schematics. Verify dimensions and product specifications. Ensure that quality control standards are met. Adhere to all safety standards. Knowledge, Skills, and Abilities Ability to work in a fast-paced work environment with rapidly changing priorities. Knowledge of production welding and assembly workflows. Knowledge of sheet metal fabrication, bending, cut off saws, and grinders. Knowledge of welding and final assembly of complex sheet metal assemblies. Self-motivated and respond timely to production metrics. Contribute to building a positive team spirit and put success of the team above own interests. Ability to speak English fluently. Reliable transportation to comply with company attendance policy. Summary of Experience and Education High school Diploma or GED. Must be 18 or over Minimum 1 year experience in Welding/Fabrication. Minimum 1 year experience working in a production environment. Benefits Health insurance Dental insurance Vision insurance Life insurance Employee discount Paid time off Referral program Pay and Schedule 8 hour shift (M-F) Salary: DOE Work Location: In person at our facility in Chandler, AZ It is the policy of Addictive Desert Designs, and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law.

Job Description A leading manufacturing company in Phoenix is seeking a skilled and motivated Welder/Fabricator to join our team. This role involves building commercial machinery chassis, parts, and components while ensuring high-quality craftsmanship and attention to detail. Responsibilities: Prepare, weld, and assemble components for commercial machinery. Tag and record completed work accurately. Assist with material and tool procurement as needed. Read and interpret blueprints or verbal instructions to fabricate components. Create simple jigs and fixtures to support production processes. Desired Qualifications: Positive attitude and pride in delivering quality work. Strong mechanical aptitude and willingness to learn. Proficient in MIG, TIG, and aluminum MIG welding (must pass a MIG and metal finishing test). Ability to operate a vertical manual milling machine and manual lathe. Experience fabricating from blueprints and/or verbal instructions. Forklift operation experience. Able to lift up to 80 lbs. Reliable attendance (Mon-Thurs, 6:00 a.m.-2:30 p.m., plus overtime as needed). Ability to pass a pre-employment drug screening. Compensation & Benefits: Pay based on experience. Fun and supportive work environment. Health and dental insurance. 401(k) plan. Vacation and sick time.

Job Description Coreslab Structures (ARIZ), Inc., a leader in the precast/pre-stressed construction industry, is seeking welders to join our team. Provide high quality concrete anchored connection hardware that is placed in precast panels and will be used to hold a precast concrete structure together. All welding candidates must have the ability to follow verbal instruction and work well in a fast-paced environment. This is a safety-sensitive position. Essential Functions Work as a team with other crew members. Maintain an organized and efficient work area. Perform the proper daily preventative maintenance as required. Weld rebar and/or anchoring studs on material by MIG welding in the most efficient manner. Ensure that each weld is per industry standard and of the highest quality. Determine when a weld is not sufficient enough and will need to be reworked. Utilize the proper safety gear/equipment that is provided. Change out welding wire and shielding gas when needed. Work closely with the shop foreman to determine what order material will need to be welded. Help keep all other areas of the department clean and organized. Basic understanding of the working/moving parts of a MIG welder Ability to read shop drawings Ability to lift heavy equipment and parts Must work safely and maintain a safe work environment Regular attendance is required Ability to walk, reach, bend, crouch, kneel, crawl, or climb Ability to work outside in various weather conditions Required Education and Experience: Welding Certification in accordance with Structural Welding Code D1.4 4 Certification can possibly be obtained after employment begins if other certifications, such as D1.1, can be provided. Preferred Education and Experience 1 year in fabrication environment 1 year MIG welding experience 1 year SMAW welding experience Walk-in applicants are welcome and encouraged to apply in person. All candidates will be required to submit to a pre-employment drug screen on site. Benefits: Medical healthcare Dental healthcare Vision healthcare 401K Paid time off Short-term & Long-term disability #hc215094

Stinger Bridge & Iron, an AISC certified structural steel fabricator and PCI certified precast concrete girder fabricator and erection contractor. Stinger focuses primarily on the Southwestern Bridge and Highway market, specializing in bridge projects. Stinger fabricates in its Coolidge, Arizona facility located south of the Phoenix/Chandler/Gilbert area and erects work in Arizona, California, Nevada, New Mexico, Texas and Colorado. For additional information about our company visit our website at **************************** POSITION SCOPE: Stinger Bridge & Iron is seeking Welders. ESSENTIAL DUTIES: General knowledge of fabrication. Stinger Bridge & Iron is an Equal Employment Opportunity Employer and an Equal Opportunity Employer of Individuals with Disabilities and Protected Veterans. Pre-employment physical and drug testing are required. If you require an accommodation to apply, please email ******************** to request it. This email is only to request an accommodation to the application process and is not an email to inquire about your application status.

United Integrated Services (USA) Corp. was founded in Phoenix, Arizona in 2020. UIS is a U.S. subsidiary of United Integrated Services Co., Ltd. (UIS Taiwan) which was founded in Taiwan in 1982. UIS is a multidisciplinary engineering and construction company. We provide fully integrated design-build services to our clients in the high-technology industry for their manufacturing facility needs. Our scope of services includes engineering design, high-tech factory planning, and on-time equipment and material delivery in which clean-room systems, HVAC, electrical systems, and tool hook-up, are all vital parts in need of total coordination. Summary: United Integrated Services (USA) is looking for a Welder to join our team! The Welder will be responsible for fabricating and assembling metal structures and equipment using welders, cutters and other metal fabrication equipment. The ideal candidate will have strong experience with welding processes, a deep understanding of safety protocols, and the ability to read blueprints and schematics to ensure projects are completed accurately and efficiently. Apply today to learn more! ** This is a full-time onsite position located in North Phoenix, AZ (85027). ** Essential Duties and Responsibilities include the following. Other duties may be assigned. Use MIG, TIG, stick, and other welding techniques to join, fabricate, and repair metal components according to project specifications. Read and interpret engineering drawings and specifications to determine appropriate welding techniques. Cut and align metal materials before welding, ensuring proper fit and finish. Fabricate and weld structural components, pipes, beams, and other items as needed, ensuring adherence to specifications and quality standards. Inspect welded joints and components to ensure that they meet company and industry standards, making any necessary adjustments to prevent defects. Set up and operate welding machines, hand tools, and power tools required to complete jobs. Adhere to company safety policies, including wearing personal protective equipment (PPE) and following proper handling techniques for hazardous materials. Conduct routine maintenance on welding equipment and perform repairs on metal structures as needed. Work alongside engineers, fabricators, and other team members to meet project deadlines and ensure work quality. Monitor welding processes to avoid overheating, warping, shrinking, or other welding defects, ensuring the final product meets quality standards. Other responsibilities as assigned. Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: High School diploma/GED. Completion of a technical school welding program, required. Ability to attend and pass a third-party welding test (PNL - Phoenix National Laboratories). 2-5+ years of welding experience in construction or manufacturing environment. Relevant welding certification Skills and Competencies: Proficiency in MIG, TIG, arc, and stick welding. Experience with fabrication tools, including grinders, drills, and saws. Ability to read and interpret engineering blueprints, schematics, and welding symbols. Strong hand-eye coordination and attention to detail. Strong organization and time management skills. Ability to act with integrity, professionalism, and confidentiality. Ability to effectively prioritize responsibilities depending on project needs. Ability to effectively present information and respond to questions from groups of managers, and employees. Ability to develop and maintain successful relationships with all levels of employees, clients, and subcontractors. Must be able to work under pressure and meet deadlines while maintaining a professional attitude. Ability to work in a construction site environment (trailer office) Language Proficiency: Excellent verbal and written communication skills in English. Ability to communicate in Mandarin, preferred. Additional Requirements: Must have and maintain a valid Arizona driver's license. May be required to travel to other sites within Arizona to perform certain work functions. Physical Demands & Work Environment This position requires the ability to lift and carry up to 50 lbs for transporting documents, equipment, and other materials as needed. The role involves extended periods standing, walking and/or of sitting while working at a computer. Frequent movement between the construction trailer and various areas of the construction site is necessary. The position is based at the construction job site (trailer office). Even though the exposure of hazardous work conditions would be minimal, the employee may be required to visit the work area of the jobsite and thus be exposed to some typical work hazards that may be present on a construction site, such as dust, moving machineries, weather, caustic chemicals, noise etc. UIS would provide the required safety protection to ensure the safety of UIS employees and comply with all OSHA standards. Equal Employment Opportunity: UIS is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status. Or any other characteristic protected by federal, state, or local law. We believe in fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. Disclaimer: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.

We are looking for a skilled Welder to cut and join metals and other materials at our facilities or construction sites. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure. A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential. Responsibilities Read blueprints and drawings and take or read measurements to plan layout and procedures Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi -automatic welding equipment in various positions (vertical, horizontal or overhead) Repair machinery and other components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Requirements Proven experience as welder Experience using a variety of welding equipment and procedures (TIG, MMA etc.) Experience in using electrical or manual tools (saws, squares, calipers etc.) Ability to read and interpret technical documents and drawings Knowledge of relative safety standards and willingness to use protective clothing (face -shield, gloves etc.) Deftness and attention to detail Proficient in English Successful completion of a relevant apprenticeship program is required Professional Certification (e.g. an AWS welding certificate) will be a plus

Full-time Description Who we are: CDI custom curb adapters is the nation's fastest curb manufacturer in the HVAC industry. We are a nation-wide company with manufacturing facilities located in the suburbs of Minneapolis, Dallas, Seattle, Charlotte, and Phoenix. Today CDI leads the curb adapter industry with the fastest lead times and the most curbs manufactured annually. We've gained this success by continuing to focus on CDI's three core values: FAST - EASY - FUN. FAST: Respond quickly - EASY: Don't complicate things - FUN: Be a great day maker Position Summary: The primary responsibility is welding of various metal types to create components used to assemble the finished product. Each task must be completed with safety, accuracy & timeliness in the welding department. Principal Duties and Responsibilities: Safe operation of MIG welding machine and various other tools used to complete project Create quality and accurate welds according to blueprints. Inspect welds for accuracy. Prepare product to be welded by grinding, drilling, milling, tapping and cutting steel parts. Change welding wire as needed. Change shielding gas tanks, as needed Follow and enforce all CDI safety rules and regulations Ensure equipment is properly set-up & used in a safe manner & that all safety devices are in use. Operate forklift, if required and certified. Performs inspections on product before, during, and after the build following CDI's standards. Monitor functionality of equipment and tools and request maintenance when required. Perform basic maintenance and repair as required. Effectively communicate with supervisors & other production staff to coordinate work schedules Other duties as assigned. Shift Time: Monday - Friday; 5:30am - 2:00pm Full-Time CDI employees are offered the following benefits: 401(k) with up to 4% employer match Health, Dental, and Vision insurance Life Insurance Short-Term and Long-Term Disability Insurance Paid Holidays and Vacation Profit Sharing Opportunities Departmental cross training and many promotional opportunities! Requirements Knowledge, Skills, and Abilities: High school diploma or equivalent qualification. Must be at least 18 years old. Outstanding attention to detail, ability to multitask, strong time management skills. Excellent knowledge of welding machinery, electrical equipment, and hand tools. Ability to use tape measures and other measuring tools. Knowledge or willingness to cross-train in other production departments. Must be willing to undergo a pre-employment drug test. Must be able to effectively read, write and speak the English language. Ability to stand or walk for extended amounts of time. Ability to frequently bend, twist, grip, squat and lift. Ability to lift 50 pounds frequently & lift 70 pounds occasionally. Combination of trade school and/or 2 years practical experience EEO/Affirmative Action Policy CDI is an equal opportunity employer and prohibits harassment of any kind. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Salary Description $20 - $23 / Hour

Townley Engineering and Manufacturing, located in Eloy, AZ has an opening for a Welder. Townley continues to be the industry leader in providing unique wear solutions for abrasion and corrosion problems found in dredging, mining, and powerplant process circuits. Responsibilities: Weld components in flat, vertical, or overhead positions Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments Requirements: 2 years of welding experience required Ability to lift up to 50 lbs unassisted Ability to read tape measure, micrometers, calipers, and gauges Ability to stand for extended periods of time on concrete Ability to tolerate excess heat and humidity Townley Engineering & Manufacturing is an Equal Opportunity Employer/Veterans/Disabled. Townley Engineering & Manufacturing is a drug-free workplace. Candidates must be able to pass a post-offer / pre-employment drug screen and job-related employment physicals. Candidates must be legally authorized to work in the United States.

Join our team and be part of a positive, friendly, and highly motivated work environment! We are looking for a skilled Sheet Metal Fabricator to join our team. We offer great benefits, career growth potential, and a supportive management team. The Sheet Metal Fabricator is responsible for fabricating ductwork and fittings while maintaining efficiency and quality standards. This role requires strong organizational skills, attention to detail, and a commitment to maintaining a safe and clean workspace. The ideal candidate will be self-driven, highly motivated, and excel in a fast-paced environment. Key Responsibilities: * Review the Fabrication Board daily for priority and emergency items. * Ensure all fabricated items are staged a day before the scheduled job. * Maintain a 3-day lead time for Add-On Replacements and 2-day lead time for New Construction fabrication. * Complete all fabrication projects on or below the allocated labor budget. * Keep fabrication stock levels updated and communicate needs in a timely manner. * Assist in job estimates for custom homes and special projects when requested. * Maintain and service fabrication equipment, ensuring all tools and machines remain fully operational. * Ensure compliance with company safety policies and participate in monthly safety training. * Keep the shop area clean and organized, removing scrap and debris daily. * Work closely with the warehouse team for stocking, pulling jobs, or receiving deliveries as needed. Qualifications: * Minimum 2 years of sheet metal fabrication experience. * Proficiency in operating plasma machines. * Strong computer skills and ability to update fabrication boards. * Excellent attention to detail and organizational skills. * Ability to work independently and problem-solve effectively. * A team-oriented mindset with a positive attitude. If you're looking for a stable, rewarding career with a company that values its employees, we'd love to hear from you! Apply today and become part of a team that prioritizes growth, teamwork, and excellence. What we Offer: * Competitive Pay * Excellent Benefits Package: * Medical, Dental, Vision Insurance * 401(k) Retirement Plan and/or Pension * Paid Vacation, Sick Time, and Holidays * Opportunities for Growth & Advancement * Performance Incentives * Employee Appreciation Events * Supportive & Team-Oriented Culture * Employee Development Programs & Discounts Schedule: * Monday - Friday, 6:00 AM - 3:00 PM #HOW Pay Range $25-$32 USD Howard Air For more than 30 years, Howard Air has focused on providing the latest technology in superior comfort to meet our customers' air conditioning and heating needs. When you join us, you will proudly be a part of an exclusive group of the highest trained and top earning professionals in the HVAC industry. Earn the most you've ever made in the HVAC industry while enjoying flexible work schedules for an unbeatable work/life balance, along with the best tools, equipment, vehicles, and facilities in the industry. We are an equal-opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Privacy Policy