Fabricator jobs in Eugene, OR

3575 25th St SE Salem Oregon 97302-1123 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce. Are you ready to move the world forward? Apply now. Valmont is currently seeking a highly motivated and talented individual for a Fabricator and Machine Operator position at our Salem, Oregon site. We are looking for a highly driven individual that will process material in accordance with shop drawings using fabrication machines and tools. Essential Functions: * This position reports into (Supervisor title) and has (#) direct reports and (#) indirect reports * This role requires up to (%) travel (internationally/domestically), including overnight stays * Flexible schedule however must be able to work in the office xxx days per week * Set-up and run a variety of drill presses * Set-up and run hydraulic iron workers, sheer, punch, and cope * Use several different layout tools * Set up and run hydraulic Press Brake * Set-up and run CNC Turret punch * Maintain material traceability * Set-up and run VMC * Set up and operate a Hydraulic Press Brake * Perform general housekeeping Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): * High School Diploma or GED equivalent * Minimum of 1 year experience working in a fast-paced manufacturing environment * Ability to lift, push or pull a maximum of 50 pounds * Must be able to read a tape measure to within 1/32" * Must be able to read shop drawings * Must be self-motivated and a fast learner * Demonstrated strengths in interpersonal skills, including the ability to adapt and professionally communicate with a variety of people Highly Qualified Candidates Will Also Possess These Qualifications: * Industrial trade school in industrial machining * One Year of previous qualified fabrication experience in a professional, manufacturing environment with press brake experience * Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Working Environment and Physical Efforts: Educational Background * Able to clearly communicate written and verbal instructions * Proficiency in addition, subtraction, multiplication, division, fractions, fraction to decimal conversions, and the use of micrometers, protractors, and tape measures * Ability to read specifications, bill of material, and simple and complex blueprints Job Training Skill Development Must be able to satisfactorily perform all functions of this position within 90 days of starting this position. Must pass Valmont forklift certification for all forklifts used in the position. Decision Making The decisions the person in this position makes affects inventory accuracy and availability of material for the production and shipping areas. The incumbent is responsible for prioritizing the workload to avoid lost time to all departments. Utilizes product mix in location assuring proper rotation of stored materials. Reviews space allocations and material flow to maximize utilization of space available. Able to apply creativity to solve the problems encountered within the scope of their activity. Examples would be to receive material, issue material, or resolve inventory discrepancies and implement the appropriate action to correct them. Effort: Physical Effort Operates equipment 50% of the time. Lifts, pushes, and carries material Mental and Visual Effort Coordination of eyes, hands and feet required to perform in an efficient and safe manner. Requires constant awareness. Must be able to accurately read and write part numbers and quantities on material, logs, move tags, and computer documents. Inventory logs and the computerized inventory system must be prepared and interpreted correctly. Due to the visual requirements of this position, employee must demonstrate acceptable vision by passing the eye test for an Oregon driver's license. If employee does not have a driver's license, the determination of acceptable vision will be made on an individual basis. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: * Healthcare (medical, prescription drugs, dental and vision) * 401k retirement plan with company match * Paid time off * Employer paid life insurance * Employer paid short-term and long-term disability including maternity leave * Work Life Support * Tuition Reimbursement up to $5,250 per year * Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2025-10-20

Job Details BASX Redmond - Redmond, OR $27.82 - $41.74 Hourly DayDescription Back to the “BASX.” With core values based on People, Product, Pride and Perseverance, BASX, located in Redmond, OR, was founded in 2014 by two entrepreneurial engineers who had a vision for providing precision air handling systems. Fast forward just 10 years, BASX, now an integral part of AAON, is an industry leader in the innovative research, development, design and manufacturing of custom heating, ventilation, and air conditioning (HVAC) solutions. Our goal is to partner with companies, in a wide range of industries such as data centers, clean rooms and surgery centers, who come to us with complex challenges that need to be resolved. Our team has a world-class reputation for manufacturing custom HVAC solutions that exceed our customers' needs and expectations, and we are proud to manufacture over 90% of our units, from start to finish, right here in beautiful Central Oregon. Our team is rapidly increasing, from 200 employees in 2022 to over 800 today, to meet the demand for our innovative solutions, and we are looking for talented individuals within a broad range of specialties to continue this incredible growth. If you are looking for a job in a dynamic, fast-paced, growing, and fun environment where you can develop and hone your skills, we want to meet you. Our team enjoys flexible shift schedules and generous benefits, including medical, dental and vision, and short- and long-term disability as well as both a 401(k) and an HSA (Health Savings Account) with a 175% employer match. We welcome people who have a passion for ingenuity, perseverance, and pride, and who love innovation and the satisfaction of knowing their work matters. We are looking for a detail-oriented quality auditor to oversee our quality control processes. You will be reviewing products for customer compliance, assessing production procedures, and evaluating process adherence in the manufacturing space. You may also need to train employees on quality standards and processes. To ensure success as a quality auditor, you should possess in-depth knowledge of manufacturing practices and an ability to communicate well with both written and spoken words. An outstanding quality auditor will be someone who can assess the quality of our products, can organize their schedule well, and effectively pass on information to a variety of groups in a timely manner. Fabrication Lead - A Shift Essential Job Duties and Responsibilities: Completes AAON's Production Leader Program. Leads a team of workers, including assigning tasks and providing guidance. Motivates and mentors team members to maximize productivity and quality. Collaborates with management team to ensure production targets are met. Allocates resources, including labor, equipment, and materials to support the production plan. Monitors and enforces quality control processes to ensure products meet established standards. Investigates and addresses production and quality related issues as they arise. Ensures all safety protocols and regulations are followed. Conducts safety training and audits and provides recommendations for safety improvements. Identifies opportunities for process optimization and improved efficiency. Implements changes and oversees process improvements to enhance productivity. Maintains accurate inventory levels of raw materials and finished products. Coordinates with inventory control teams to minimize waste and optimize stock levels. Generates regular reports on performance, including productivity, quality, and efficiency metrics. Provides regular updates to management on production status and challenges. Qualifications Education and Experience Requirements: High School diploma or General Education Degree (GED) or an equivalent combination of education and experience with 3 years of experience in a production or manufacturing role preferred. Knowledge, Skills, and Abilities: Strong knowledge of production processes, quality control and safety regulations Excellent communication and interpersonal skills Strong problem-solving and decision-making abilities. Good organizational and time management skills. Proficiency in using Microsoft Office products and production management software and systems. Ability to obtain and maintain 608 universal refrigerant certification. Ability to communicate in written and spoken English language. Work Environment: Ability to regularly lift and move objects up to 50 lbs. Ability to stand, bend, and perform repetitive tasks for extended periods of time during shift. Required to wear proper personal protective equipment. Ability to work in manufacturing facilities and regularly be exposed to varying and extreme temperatures, loud noises, dust, chemical fumes, sharp metal objects and heavy forklift traffic. This position is designated as a safety-sensitive job and therefore subject to drug and alcohol testing, including random testing. Disclaimer: Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at a time with or without notice. This is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. The company reserves the right to revise this at any time. The employee must be able to perform the essential functions of the position satisfactorily. If requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. Acknowledgement: I have read this job description (or had it read to me) and I fully understand all my job duties and responsibilities. I am able to perform the duties and responsibilities as outlined, with or without reasonable accommodation. I understand that my job duties and responsibilities may change on a temporary or regular basis according to the needs of my location or department and if so I will be required to perform such additional duties and responsibilities. If I have any questions about job duties not specified on this description that I am asked to perform, I should discuss them with my immediate supervisor or a member of the Human Resources staff.

Gaylord Industries; a division of ITW is seeking a seasoned Sheet Metal Fabricator to add to their team in Tualatin, OR. Schedule: Monday - Thursday 5:00am - 3:30pm ***Overtime on Fridays***Skills/Ability: Skills to perform high quality Tig welding, grinding and finishing skills. This will include: fillet welding with uniform width and depth, and grinding and striping no wider than 3/8” with all burn marks blended out and no marks showing. Skills to fuse weld a 90 degree joint, keeping weld surface flat, width even, with exterior edge sharp and no rollover. Working knowledge of the following tools: drill motors, cutoff saws, Grinders, drill press, Tapping tools, belt sanders and various hand tools. Proficiently read and use a tape measure. Read and understand English in order to read/interpret prints, diagrams and drawings. Proficient math skills. Must be a team player, including good interpersonal skills Experience: 1+ years Tig welding experience 1+ years grinding/polishing experience Essential Functions/Responsibilities: Tig fillet weld and finish stainless steel equipment and components with uniform width and depth. Ensure high quality standards are achieved and maintained. Analyzes plans, drawings, work samples, specifications, and work orders to determine work requirements and sequence of welding assignments. Follow all safety and housekeeping rules. Actively participate in Safety Program Cross train into other areas and job functions as needed. Willing to assist in other areas as needed. Welding is 20% of the assembly process. Installation of screws/nuts/bolts/rivets/silicone and more. Education: High School Diploma or GED. Minimum age requirement is 18 years. Successful completion of an internal welding demonstration test Physical Requirements: The ability to lift, carry, push, or pull objects of 75 lbs or more. The ability to endure prolonged physical activity to work in demanding environments. The ability to bend, squat, reach, and turn in various directions. The ability to manipulate objects with precision and speed. Vision, hearing, and other sensory abilities are needed for specific tasks. The ability to safely climb and work from ladders, work on scaffolding, or perform other tasks at elevated heights. Compensation Information: Pay: $22.00 - $26.00 hourly DOE ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

JCI welder/fabricators have a knack for safety, quality and team work. If these sound like characteristics that describe you, JCI is where you should be! At JCI, we take pride in developing talent. If you're new to welding/fabrication and want to expand your skillset, this is the place for you! OR- if you're an experienced welder, bored with seeing the same plans all the time, we can offer variety! Our welders start at $20-$25/hr depending on experience and the scale currently goes to $30.81- so if opportunity is what you want, that is what you will get at JCI! As a welder/fabricator you will: Cut and prepare surfaces or components, lay out, position, fit, tack, weld, and finish a variety of parts or products following prescribed methods and specifications Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures. Weld in flat, horizontal, vertical or overhead positions. Other duties as assigned Successful candidates should have a High school diploma. Must be able to pass JCI weld test. Must be able to read, analyze and interpret detail drawings. Experience in forklift, overhead crane and rigging is required. At JCI, we take pride in developing talent. If you want to expand your skillset, this is the place for you! EOE/M/F/Vets/Individuals with Disabilities.

Read and interpret Drawings and work orders Fabricate / weld stainless steel components with attention to detail Must be able to safely operate the following production machinery: Shear Metal Saw Press Brake Overhead Crane Welder Ability to safely operate the following production machinery a plus: Hydraulic Punch Plasma Table Experience with a Bridgeport milling machine Non job specific duties as assigned Experience installing industrial equipment We are a small local company that manufactures high end, hand built commercial grade dehydrators. We offer PTO, medical and life insurance, and a Simple IRA. All new employees are subject to a 90-day probationary period. Education: High school or equivalent (Preferred) Experience: Fabrication: 2 years (Preferred) Probation Period: 90 days

At Astec-Franklin Blvd, formerly known as Johnson Crushers International (JCI), our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! $1500.00 Sign-On Bonus and Day or Swing shift. Swing has a $2.00 shift differential. What You'll Do: * Cut and prepare surfaces or components * Lay out, position, fit, tack, weld, and finish a variety of parts or products following established methods and specifications * Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures * Weld in flat, horizontal, vertical, or overhead positions * Other job duties as assigned Why You'll Love Working for Us: * Health, Dental, Vision- Day 1 Eligibility * Life, and Spousal Insurance * Health Savings and Flexible Spending Accounts * Short-Term and Long-Term Disability * 401(k) with Company Match * PTO * Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: * High school diploma or GED preferred * Forklift, overhead crane, and rigging experience required * Must pass weld test * Ability to read, analyze, and interpret detailed drawings ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

Your next opportunity is here - Urgently hiring Welder Fabricators in Eugene, Oregon! Job Title: Welder Fabricator Pay: $22.00 - $24.00 per hour, DOE Hours: Monday - Friday, 6:30AM - 3:00PM As a Welder Fabricator, you'll play a key role in producing high-quality welded and fabricated components for essential water pumping systems and custom industrial projects. You'll work closely with a skilled fabrication team to ensure accuracy, craftsmanship, and safety in every piece you build. What You'll Do As a Welder Fabricator, you will be responsible for: Welding and fabricating vacuum chambers and fuel cells for water pumping stations Studying blueprints and Bills of Material (BOMs) to determine materials and task sequence Verifying material conformance using measuring tapes, squares, and rulers Aligning and fitting parts according to specifications Marking cutting and bending lines while accounting for thickness, shrinkage, and weld requirements Positioning workpieces manually or with forklifts and overhead cranes Setting up and operating fabrication machinery including brakes, rolls, shears, grinders, and drill presses Preparing surfaces for welding by removing rust, slag, grease, moisture, and other contaminants Clamping, tacking, grinding, bending, or bolting parts to achieve required configurations Welding in flat, vertical, and overhead positions using manual or semi-automatic equipment Monitoring welding and burning processes to prevent overheating, distortion, or warping Inspecting completed workpieces for defects and ensuring specification compliance Operating cranes safely and following proper protocols Maintaining welding and related equipment Learning company products and fabrication processes and accepting ongoing training Maintaining consistent, reliable attendance What You'll Bring The ideal candidate for this role will have: MIG welding experience with the ability to produce airtight welds Dual Shield welding experience (required) Strong mechanical aptitude and attention to detail Ability to read and interpret blueprints and fabrication drawings Physical ability to lift, position, and maneuver metal parts safely Willingness to learn, follow instructions, and work as part of a skilled team Why Join Us in Eugene? Career growth opportunities in a respected local fabrication shop Stable hours and supportive team culture Competitive pay based on experience Enjoy affordable health and prescription coverage once hired permanently Additional benefits offered by the employer after permanent hire Location & Schedule This position is on-site in Eugene, Oregon, and offers a Monday-Friday, 6:30AM-3:00PM schedule. Ready to Take the Next Step? If you're ready to start a rewarding career as a Welder Fabricator in Eugene, apply today or contact our recruiting team to learn more. Don't wait - we're hiring now! #STEUG

Full-time Description Hiring multiple candidates! If you're familiar with Pavati Boats, you already know we're renowned for creating the most customized boats on the planet. As a family-run business, we pride ourselves on crafting high-performance aluminum wake boats that are known for their unmatched quality. Do you want to join the team of "Master Builders" shaping the future of these unique boats? Well, your opportunity is here! We're growing and seeking skilled aluminum welders to join our family in Southern Oregon. As a welder at Pavati, you'll play a key role in crafting top-tier boats that meet the highest industry standards. If you have experience in aluminum welding and are ready to take your career to new heights, we want you on our team. You'll start with parts to weld that fit perfectly, paired with one-on-one training until you're confident building your own "work of art" - a Pavati boat. Bonus: We're also Highway Products, makers of aluminum truck bodies and accessories, and we're looking for multiple great welders too. There's plenty of opportunity to grow with us! Feel free to email us at ********************** or call at ************ for a confidential conversation about becoming part of our innovative, expanding, and family-oriented team! Se habla Español! Take a look at what we do: ****************** Duties & Responsibilities: Set up welding equipment and tools (MIG and TIG). Review prints and drawings, and ensure parts meet specifications and accuracy. Weld, cut, and grind aluminum of various widths. Inspect completed products to ensure they meet quality standards. Maintain a clean and safe welding booth and equipment. Why Work at Pavati? Competitive Pay: Wages range from $24 to $35 per hour, based on experience. Training Opportunities: Job-specific training and in-house Weld and Fabrication Training Programs. Benefits: Paid holidays, paid time off (accruing from your first day), health, dental, and vision insurance, and a generous 401(k) employer match program. Career Growth: Performance-based salary growth and career advancement opportunities. Requirements Requirements: High School Diploma or GED. Experience with MIG and TIG welding. Aluminum welding experience is required. Welding certification is a plus, but not required. We will train the right person. Strong attention to detail and work ethic. PAVATI is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. Pavati complies with the Americans with Disability Act.

Madden Industrial Craftsmen is seeking an experienced Fabricator/Welder to join our client's structural steel company in Portland, OR. This role supports the assembly, installation, and maintenance of steel structures used in buildings, bridges, and large infrastructure projects. You'll work directly from blueprints and collaborate with welders, fabricators, and engineers to ensure all components are accurately fit and safely installed. Pay: $27-$32/hr DOE Schedule: Monday-Friday, Day & Swing Shifts available Key Responsibilities * Read and interpret blueprints, drawings, and plans to determine fabrication and installation requirements * Fit, align, and secure structural steel components such as beams, columns, braces, and frames * Measure, cut, drill, and prep steel parts per project specifications * Use hand and power tools to fabricate, modify, and assemble steel components * Work closely with welders to ensure proper fit-up and correct weld or bolt placement * Inspect completed structures for accuracy and compliance with project specifications * Operate cranes, hoists, and lifting equipment to position large steel components * Maintain tools and equipment while following all safety procedures and regulations * Perform welding and fabrication as needed * Work at heights and in physically demanding environments while maintaining safe work habits What You Bring * Proven experience as a Structural Steel Fitter, Fabricator, or similar role * Strong ability to read and interpret blueprints, schematics, and technical drawings * Experience operating cranes, hoists, or other heavy lifting equipment * Solid understanding of structural fitting techniques, tools, and layout methods * Ability to work safely at heights and in demanding physical conditions * Dependable, safety-first mindset with strong attention to detail * Ability to lift heavy materials and perform frequent standing, bending, and kneeling * Must be 18+ years of age Maybe You Have * Experience on large-scale structural projects such as bridges or commercial buildings * Flux core welding skills or additional fabrication certifications * Experience assisting engineers or project managers with technical fit-up solutions Benefits * Medical insurance * Paid sick time * 401(k) with company match * Holiday pay Work Environment This position operates in a structural steel fabrication and installation environment. Expect exposure to heavy equipment, elevated work areas, noise, and heat. PPE is required at all times, along with strict adherence to shop and site safety protocols. #ZR #MON

We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Tangent, OR facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon. 2. Operate air arc to remove steel (back gouging). 3. Grind with 90° angle grinder. 5. Read weld symbols and check weld size using weld fillet gauges. 6. Heat material to required temperature using temperature sticks and heating torch/cutting torch. (read and follow pre-heart & interpass temperature tables.) 7. Set machines according to procedure charts. 8. Use air chipper to chip of slag. 9. Use natural gas propane heaters to pre-heat steel. 10. Operate stud welder. 11. Follow weld procedures as it applies to volts, amps & wire feed speed. 12. Heat, straighten and be able to know when to use pre-heat to offset distortion. 14. Perform other duties as required by management. Shift Times: Day (M-F): 6:00am-4:30pm Swing Shift: 4:30pm-3:00am Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

Responsible for various types of weld preparation, GTAW welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction. Self-motivated people who want to make a difference should apply. Thin metal welding (less than . 060”) is a plus

Responsible for various types of weld preparation, GTAW welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction. Self-motivated people who want to make a difference should apply. Thin metal welding (less than . 060”) is a plus

Max Manufacturing, one of Central Oregon's most skilled fab shops, is searching for an experienced structural steel fabricator. This position involves multiple types of metal fabrication, from heavy structural steel to light gauge cosmetic, you will see it all. Essential Duties & Responsibilities Knowledge and use of handheld fabrication equipment Ability to operate forklift routinely in a safe manner Well versed in general fabrication techniques Ability to read and understand shop drawings, blueprints and sketches as required to produce projects Must have physical strength and manual dexterity, including hand/eye coordination, to manage all materials and tasks as required per job 5+ years of experience Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Benefits Max Manufacturing benefit offerings cover medical, dental, vision, a Flexible Spending Account (FSA), Health Reimbursement Account (HRA), One Pass, life insurance, mental health wellbeing, medical transportation, supplemental insurance for tough situations life throws at you, a generous 401k plan, and accrued paid time off (PTO). Employment Eligibility & Relationship Disclaimer Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Let's Get After It. At Woods Equipment Company, we are a passionate group of people dedicated to a spirit of innovation and outside the box thinking to create the world's most efficient agriculture products and attachments. We believe in inspiring, listening, learning, and rolling up our sleeves to “get after it” together. We serve a higher purpose than the products we make and are devoted to positively impacting people, communities, and landscapes around the world. We are built on a pioneering spirit, leading with humility, global stewardship, and owning it day in and day out. We know what it takes to get the job done, and we know our people are the way it happens. Come join our team! HIGHLIGHTS: Hourly Rate: $22.50 - $25.90 Shift: Day Shift, M-Th (5:30am - 3:30pm) HOW YOU MAKE AN IMPACT: Under limited supervision, the Welder will weld material to produce expected quantity of work with acceptable quality levels. THE DETAILS: Read and interpret the layout from operation sheets, blueprints, sketches, and verbal instructions for simple assemblies to be welded Clean and prep material to be welded Weld and/or assemble simple subassemblies or final assemblies of systems involving welding to high strength and pressure requirements Set up and operate other machines as required for simple assembly Utilize measuring equipment and operate hand tools for welding Position and clamp work pieces together or assemble them in jig or fixture. Work safely complying with all safety rules and regulations Produce sufficient and expected quantity of work with acceptable quality levels QUALIFICATIONS & SKILLS: High school diploma or equivalent (GED); or six months related experience and/or training; or equivalent combination of education and experience Must be able to read and interpret documents such as safety rules, blueprints, general policies, instructions, and procedure manuals Ability to update routine production order status and write tags for rework Must be able to verbally communicate with co-workers in all areas of the plant Must have basic math skills Able to frequently lift and/or move 50 pounds or more. WHAT WE OFFER: Medical, Dental, and Vision Benefits available on day one (no waiting period) 401k matching (100% of first 3%, 50% of next 3% = 4.5% match on 6% contribution) Earn up to 120 hours vacation during your first year of service One paid Community Involvement Day available per calendar year Global company with small company feel Safety shoes reimbursed at $150 per year Safety prescription glasses through approved program WHO WE ARE: Woods Equipment, part of the Oregon Tool, Inc. family of brands. Oregon Tool, Inc. is a global, premium-branded, aftermarket-driven precision-cutting-tool platform. At Oregon Tool, Inc., it is our goal to create, cultivate and sustain a global, inclusive culture, where differences drive innovative solutions to meet the needs of our employees and customers. We invite and encourage applications from all skilled individuals, including from groups that are traditionally underrepresented, not just because it's the right thing to do, but because it makes our company #SharperTogether. To learn more about our company and history visit us at: ****************** Oregon Tool, Inc. will only employ those who are legally authorized to work. Any offer of employment is contingent on a background investigation and drug screen. Oregon Tool, Inc. does not discriminate based on sex, race, color, religion, age, marital status, national origin, citizenship, disability, veteran status, or any other status protected under law. During the application process we will not ask for or collect any confidential, proprietary, or sensitive personally identifiable information (e.g., date of birth; driver's license number; or credit card, bank account or other financial information). If you submit such information, you do so at your own risk, and we will not be liable to you or responsible for consequences of your submission. This notice should not be construed as an offer of employment or creating any terms of employment. #LI-VR #Woods

Reports to: Shop Foreman/General Manager Pay Range: $25.00-$30.00/Hour Shift: M-F, 6am to 2:30pm The Welder 2 supports Production in the preparation, processing, and post weld finishing of parts for Aerospace and commercial manufacturing. TIG welding experience is a must. We Offer Amazing Benefits! Medical, Dental and Vision for employees 100% paid by company Company paid life insurance, short-term and long-term disability 401K with 5% company matching PTO, sick time and 12 paid holidays The successful candidate will possess the following skills, abilities, and experience: 3+ years relevant training/ professional experience Demonstrate proficiency in TIG and MIG welding to quality/NDT standards Experience with aluminum, titanium, Inconel and stainless-steel welding preferred Ability to navigate and complete basic time tracking and operations within ERP system Ability to read and follow weld procedures Accuracy, attention to detail, and dexterity Positive attitude and disciplined Ability to read blueprints, models, and quality specifications Safety conscious Quality conscious Essential Duties and Responsibilities include the following: Maintain clean and safe work area Perform preventative maintenance tasks as assigned Independently perform all welding, brazing, or solder jobs assigned in accordance with written and verbal instruction without direct supervision Ability to grind, polish, and/or perform pre and post weld finishing as required Consistently produce quality parts that meet QMS and customer specifications within targeted production times established Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Lift: up to 50lbs, Stand/walk: up to 85%, Sit: up to 75%, Other: up to 50% Twisting at the waist, bending/stooping, squatting/kneeling, reaching out, talking/hearing/seeing, working above shoulders, handling/grasping, fine finger manipulation, foot controls, driving, repetitive motion, vibratory tasks. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to Shop/Industrial environment. Frequently used PPE in this position is: Ear protection, dust masks, respirators, gloves, and safety glasses. REQUIRED SKILLS/EXPERIENCE: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Supervisory Responsibilities: This position has no supervisory responsibilities Education and/or Experience: High school diploma or GED. 3+ years welding experience, preferably in a Quality System driven industry. Successful completion of all certifications for Welder 2 as specified Certificates, Licenses, or Registrations: None required Eligible to work on ITAR projects (lawful permanent resident of the United States as defined by 8 U.S.C.) Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. L&E Tubing, LLC believes that each employee makes a significant contribution to our success. That contribution should not be limited by the assigned responsibilities. This position description is designed to outline primary duties, qualifications, and job scope, but not limit our employees nor the organization to just the work identified. It is our expectation that each employee will offer his/her services wherever and whenever necessary to ensure the success of the company.

Temp To Full-Time Welder Pay$18-$22/hour (DOE) Schedule: 7:30am - 4pm GLISS General Labor & Industrial Staffing Solutions is seeking a Welder to join a locally owned and well-established specialty fencing construction company in Salem, Oregon. This position offers an exciting opportunity to kickstart or advance your career with a leading commercial and residential construction company. Job Responsibilities: Testing welding and safety equipment Cutting, assembling, and repairing building components like girders and beams Checking for gap and angle allowances Welding and assembling metal pieces and products using handheld welding equipment Setting up parts for welding Using hand tools, clamps, jigs, and fixtures Working from specifications, drawings, and weld symbols Preparing and completing work on materials through welding, cutting, grinding, and cleaning metal Knowledge, Skills & Abilities: Proficiency in welding techniques Familiarity with safety procedures Ability to read and interpret welding blueprints and schematics Strong communication skills Excellent hand-eye coordination Steady hands and stamina for prolonged periods of work Capacity to work with large pieces of metal Ability to stand for extended periods and maneuver safely around equipment Experience operating and setting multiple types of welding equipment BENEFITS OFFERED TO ELIGIBLE GLISS EMPLOYEES: Medical insurance Dental Insurance Vision insurance 401k retirement plan Referral bonuses HOW TO APPLY: Start the first part of your application online at ******************* Once your application is complete, call us at ************** to schedule an interview. Applications are accepted by appointment only, Office Hours: Monday-Thursday, 8:00 AM-5:00 PM 3070 Lancaster Dr NE Salem, OR 97301

Job Description NEW SHOP in PNW!! WE ARE HIRING Fabricators & Welders!! About us: Oregon Mining & Ag Fabrication is a new shop in the Pacific Northwest entering into the fabrication industry. Specializing in design-build projects, build-from-print manufacturing, and expert repair work, we're positioning ourselves to become the region's premier fabrication shop. Our ambitious team is driven by a commitment to hard work, uncompromising quality, and ethical business practices. As we embark on a trajectory of strong growth, we're offering exceptional opportunities for skilled professionals to advance their careers and make a significant impact in our industry. The Opportunity: Fabricator & Welder We're seeking seasoned fabricators and welders to join our team and contribute to our vision of excellence. The ideal candidate will bring a wealth of experience, a passion for craftsmanship, and a drive to excel in a dynamic work environment. *Experience with exotic alloy fabrication is a plus, as is the ability to adapt to a diverse range of projects and challenges* What we're looking for: The successful candidate will possess a minimum of at least 3-5 years of experience in the metal fabrication industry. You should be adept at reading and working from prints, capable of working autonomously, and committed to maintaining the highest standards of quality in your work. Your technical skills should include proficiency in all-position welding, including multi-pass heavy welding. You should be competent in fitting, understanding the correct order of operations, and comfortable with using torches and air arcs. We value creativity in fit-ups and the ability to tackle unorthodox work. About you: We're looking for individuals who take pride in their work, demonstrate a strong work ethic, and contribute positively to our team atmosphere. You should be open to constructive feedback and committed to punctuality and regular attendance. A dedication to safety and proper equipment care is essential. Job Details: Jobsite is located at: 10590 Donald Rd., NE, Donald, OR 97020 (Bldg.#2) Working Hours: Mondays-Fridays from 7:00am-3:00PM Compensation is dependent on experience Qualifications: Must have reliable transportation Submit to background /drug screenings and pre-employment screenings Benefits: Medical/Vision/Dental (monthly premiums paid by employer after waiting period) Vacation & OSL Generous 401k employer match Joining Oregon Mining & Ag Fabrication means becoming part of a forward-thinking team at the ground floor of an exciting venture. If you're excited by the prospect of shaping the future of fabrication in the Pacific Northwest, we invite you to apply. You'll have the opportunity to work on a wide variety of projects, each presenting unique challenges and learning opportunities. As we grow, so too will the potential for your career advancement. We are an equal opportunity employer. We look forward to hearing from you and potentially welcoming you to our team. Job Type: Full-time Shift: Day shift Work Location: In person

Job Description Legacy Talent Search is currently seeking candidates for a Pressure Vessel Welder role in Gresham, OR. Our client is a well-established industry leader known for precision fabrication, innovation, and a strong commitment to quality craftsmanship. With decades of experience serving critical industries, they take pride in producing reliable, high-performance welded assemblies that meet the most demanding standards. Key Responsibilities: · Perform high-quality welds on pressure vessels, tanks, and related components using MIG, TIG, and Stick welding processes. · Read and interpret blueprints, welding symbols, and engineering drawings to ensure accuracy and compliance with ASME standards. · Set up, calibrate, and maintain welding equipment to achieve consistent results. · Conduct weld inspections and make necessary repairs or adjustments to maintain integrity and compliance. · Work with carbon steel, stainless steel, and other alloys as required by project specifications. · Follow strict safety procedures and quality control guidelines throughout the welding process. · Collaborate with engineering and fabrication teams to ensure efficient workflow and timely project completion. · Maintain accurate documentation of welds, inspections, and material certifications as required by company and regulatory standards. Qualifications: · High school diploma or equivalent required; completion of a certified welding program or apprenticeship preferred. · Minimum of 3 years' experience in pressure vessel or structural welding. · Proficient in MIG, TIG, and Stick welding processes. · Current or previous ASME Section IX certification (or ability to obtain) strongly preferred. · Ability to read and interpret complex blueprints and weld symbols. · Strong understanding of metallurgy, heat control, and weld quality requirements. · Excellent attention to detail and commitment to producing safe, compliant welds. · Ability to lift up to 50+ lbs and work in a fabrication shop environment. What We Offer: · Competitive hourly wage based on experience and certifications. · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for certification renewals and continued skill development. · A safe, team-oriented workplace focused on craftsmanship and continuous improvement. · The chance to join a company with a strong reputation for quality and innovation in metal fabrication. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life-one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

ENTEK is a major Oregon employer and an enabler of global clean energy with headquarters in Lebanon Oregon. We are a top producer of separators for both lithium and lead acid batteries, best in class twin screw extruders and machinery for the plastics industry, and we have a full complement of engineering services to provide our customers with excellent products and services worldwide. Our success is fueled by consistently living our core values of respect, integrity, commitment, and innovation. ENTEK's commitment to non-stop innovation and attention to customer service keeps our customer's production lines humming. ENTEK is a dynamic and engaging place to work. We believe in supporting our employees, by offering paid time off, health insurance including medical, dental, and vision, 401k, and tuition reimbursement. Our teams are world-class! Stop by our website at ************* to learn more about our company and the opportunities that await you at ENTEK. Job Description ENTEK Manufacturing is looking for a talented Welder/Fitter. Qualifications Requires 2 or more years experience in TIG, MIG & Stick welding and metal fabrication Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to talk or hear. We are an Equal Opportunity Employer. M/F/Disabled/Veteran