Fabricator jobs in Glen Burnie, MD - 50 jobs

Westminster, MD RMS Truck Bodies is expanding our team! Whether you're an experienced mechanic, technician, or fabricator, or someone eager to train and build new skills, this is a great opportunity to work with hydraulic systems on custom truck bodies in a supportive shop that values teamwork, safety, and career advancement. Compensation & Schedule * $25+/hour (based on experience) * Monday-Friday, 7:00 a.m. - 3:30 p.m. * Full-time, benefits-eligible Benefits * Sign-on bonus up to $5,000 for qualified candidates * Medical, dental, vision, disability, life & supplemental insurance (eligible the 1st of the month after 30 days) * Flexible schedule-no nights or weekends * Comprehensive paid training to earn certifications * 401(k) with company contribution * Paid time off & company-paid holidays * Tuition reimbursement program * Employee referral bonus program * Advancement opportunities - we promote from within Responsibilities * Install, plumb, and commission hydraulic equipment on truck bodies (e.g., pumps, valves, cylinders, PTOs) * Perform light fabrication/welding, mounting, and fit-up of equipment and accessories * Route hoses and wiring; perform basic 12V electrical hookups and testing * Read/use build sheets, drawings, and spec sheets; verify parts and configurations * Troubleshoot hydraulic/mechanical issues and complete quality repairs * Follow shop safety procedures and maintain a clean, organized work area * Document work performed and parts used; other duties as assigned Requirements * High school diploma or GED * Valid driver's license * Mechanical aptitude and ability to use hand/power tools * Strong focus on safety, quality, and efficiency * Preferred: experience with hydraulics, light welding/fabrication, or 12V electrical (will train the right candidate) Work Authorization All Roads Company does not provide H-1B sponsorship. No security clearance required. AAP/EEO Statement All Roads Company and its subsidiaries are committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. All Roads will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Apply Today! Grow your fabrication and hydraulic skill set with a team that invests in your success-apply now to join RMS Truck Bodies in Westminster.

Palace Petites is scheduled to relaunch in Spring/Summer of 2015. It will provide one-stop shopping for fashionable ladies 5'3″ in height or plus petite. Palace Petites will showcase haute couture designs for petite sizes 2 - 12 Job Description The company is looking to relaunch the business as a label.A skilled pattern designer/maker/cutter is needed.Additionally, the person will need to be able to use the pattern to make samples, including performing the necessary alterations.This is a small contractual project, but looking to build interest with a few initial designs. Qualifications Profile The ideal candidate will have proven experience making a pattern from raw sketches and completing the fabrication of a sample from that sketch. Must be interested in working with a start-up and with those new to the Fashion Industry. Specific needs Must be able to work independently, taking directions from email and voice conversations. Additional Information Thank you for your interest! To Apply: Please enter in your work history into the online application, along with a cover letter and be certain to provide both an email and telephone number for contact. Your cover letter should include: Your name, address, telephone number, email address, the URL to your online portfolio, and a second page containing your professional references. In addition to your resume and cover letter, please submit a link to your online portfolio as an attachment and three (3) professional references. Include both a phone number and an email address for each of your references.

Under direct supervision, the Fabricator makes, repairs, adapts, and rectifies tools, dies and other pieces of mechanical equipment with high precision specifications and tolerances by interpreting blueprints, consulting specifications and making operative tests. The Fabricator operates all kinds of mechanical tools under the guidance of a supervisor. The Fabricator fits and assembles parts to fabricate and repairs dies, cutting tools, jigs and related items. The Fabricator modifies dies to conform to engineering changes. JOB DUTIES: • Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers and rulers. • Examines work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications. • Verifies conformance of work pieces to specifications, using squares, rulers, and measuring tapes. • Sets up and operates fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill or otherwise form and assembles components. • May position, align, fit and weld parts to form complete units or subunits, follows blueprints and layout specifications, and uses appropriate tools and equipment. • May weld components in flat, vertical, or overhead positions. May tack-weld fitted parts together. • Operates safety equipment and use safe work habits. • Keeps work area clean. • Perform other duties as assigned. • Studies engineering drawings and blueprints to determine materials requirements and task sequences. EDUCATION & EXPERIENCE: Typically requires a high school diploma or GED. KNOWLEDGE, SKILLS, ABILITIES: • Knowledge of monitoring gauges, dials or other indicators to make sure a machine is working properly. • Read and understand work orders. • Knowledge of mathematics and its application. PHYSICAL DEMANDS: Requires manual dexterity, arm-hand steadiness and multi-limb coordination. Ability to handle material up to 100 pounds. COMPANY INFORMATION: Motion offers an excellent benefits package which includes options for healthcare coverage, 401(k), tuition, reimbursement, vacation, sick, and holiday pay. Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

Job DescriptionWe are looking for a Sheet Metal Fabricator (Ductwork) with 5+ Years experience. We are located in Beltsville, MD- Immediate Hire.

Job Title: Welder/Assembler - Systems Calibration (1st Shift) Pay: $40.02 as of Jan. 13, 2026 + $1,500 Sign-On Bonus Join Our Team as a Welder/Assembler Are you a skilled welder with a passion for precision and quality? We're seeking a dedicated professional to join our Systems Calibration team. This role involves complex fabrication and assembly of piping systems and pressure vessels using MIG, TIG, and manual arc welding techniques. If you thrive in a collaborative environment and enjoy working on challenging projects, we want to hear from you. What You'll Do Fabricate, assemble, and weld complex piping and pressure vessel components. Work from isometric drawings, welding symbols, specifications, and flow diagrams. Perform layout, fit-up, tack welding, and final welding to meet customer and code requirements. Use a variety of tools and equipment including scales, levels, torches, and welding machines. Conduct pressure testing and repairs on prototype and customer units. Support facility equipment maintenance and repairs. Maintain a clean and safe work environment. What We're Looking For Required Skills & Experience: Minimum 4 years of welding and fabrication experience REQUIRED. Ability to pass the following weld tests: 2” Schedule 160 Carbon Steel (6G Position): GTAW Root / SMAW Fill & Cap 6” Schedule 40 Carbon Steel (6G Position): SMAW Root / SMAW Fill & Cap Proficiency in pipe fitting, structural welding, blueprint reading, and fabrication equipment. Strong teamwork and communication skills. Critical thinking and problem-solving abilities. Knowledge of shop mathematics, welding codes, and specifications. Certified in required code welding qualifications. Additional Requirements: Ability to lift up to 50 lbs and work at heights over 12 feet. Completion of a 120-day training program (additional training may be required). Understanding of Health & Safety and Environmental policies and procedures. Why Join Us? This is more than just a welding job-it's an opportunity to be part of a team that values craftsmanship, safety, and innovation. You'll work alongside engineers and technicians on meaningful projects that make a difference. Plus, enjoy competitive pay and a generous $1,500 sign-on bonus. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Fabricate and Weld structural metals with the proper materials to the correct dimensions, tolerances, and/or other specifications as defined on the work instructions. This process will include applying fabricating and welding skills to produce company's products, working independently or with others as part of a team, and requires the ability to coordinate and communicate. A supervisor reviews work to ensure quality and accuracy. As a faith-based organization rooted in biblical principles, we strive to reflect these values in our work, relationships, and decision-making. We expect all associates to learn, embrace, and actively model our core values through their actions, choices, and collaboration with others. This commitment is essential to sustaining our culture and achieving shared success. This job description does not describe all the activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/ RESPONSIBILITIES: Responsible for the layout, assembly, and welding of various grating product lines by identifying the material and spacing requirements as defined by the work instructions. Communicate effectively and work well with others, including but not limited to, during shift changes. Review work instructions and identify the material, process, press, or machine needed to perform the work requirements. Safe operation and usage of overhead and jib cranes to assist in the movement and placement of grating panels. Safe operation and usage of various power tools, including but not limited to power saws, presses, grinders, cutting torches, band saws, cold saws, table saws, routers, and welders. Accurately complete all paperwork and transactions in the ERP system(Epicor) to properly manage inventory Fallow all operating procedures, process instructions, and safety procedures. Set up welder wire, weld wire, and gases to correct parameters to ensure visually acceptable fillet welds. Conduct visual weld inspections to identify faulty welds, and recognize and immediately report to supervision all quality issues. Keep personal and common work areas clean and organized. Perform other duties and cross-train as assigned by the supervisor. EDUCATION, WORK EXPERIENCE, PROFICIENCIES: REQUIRED: In addition to a required High School diploma or equivalent, the following skills or experience are required: prior fabrication experience such as crane operation, metal processing, material handling equipment experience, and various hand power tools. The candidate must also be able to read and understand standard units of measure add and subtract two-digit numbers and multiply and divide by 1Os and 100s without using a calculator. PREFERRED: MIG Welding, Oxy/Fuel Torch, plasma cutting torch experience with Carbon, Stainless Steel, and/or Aluminum; AWS certifications in D1.1, D1.5, D1.6, and/or D1.2; know Welding 101, weld symbols and how to use filet weld gauges; experience with complex fit up and fixturing; the ability to read, comprehend and interpret blueprint drawings and demonstrated (project) troubleshooting experience; demonstrate an aptitude for attention to detail; work effectively with other team members and possess written and verbal communication skills. EEO STATEMENT: Our company provides equal employment opportunities to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

Atlantic Design, Inc is an established leader in the design of custom equipment for the blasting and coating industry. We are currently seeking Manufacturing Mechanics with a strong work ethic for our growing company in the Baltimore area. This is a full-time position with benefits. Mechanics are responsible for a variety of mechanical and welding tasks in order to assemble stock parts and install pre-fabricated structural components in the building of our equipment. Duties include joining, repairing, and performing light fabrication of metal and other weldable material by applying appropriate welding techniques and operating various welding / fitting / fabrication tools. Must maintain productivity and quality output. We are looking to invest in career-minded applicants. If you have a positive attitude, good work ethic, are safety conscious, and have a willingness to learn, then we welcome you to apply. Our employees are vital to our success, which is why we hire people for careers, not jobs. Expectations / Qualifications: Some relevant mechanical and manufacturing experience required. Training and/or prior experience with Mig welding, to include a basic understanding of machines and tools used in welding. High School diploma or GED. Good general math skills and ability to read tape measure. Strong hand/power tool knowledge and experience. Ability to follow instructions and work independently. Dependable with strong attention to detail. Ability to read blueprints and weld symbols preferred. Must be capable of physical demands of the position including walking, standing, climbing, bending, twisting, pushing, pulling and lifting/moving (up to 50 pounds). Must be able to work in a manufacturing environment, recognizing various sounds and temperatures. Must have a driver's license. Must be willing to work overtime. Must be able to pass Drug screening test. Starting pay will be $20 to $23 per hour, depending on experience and training needed. We may be willing to pay more based on applicable mechanical and mig welding work experiences (we do conduct a weld test). Benefits: Atlantic Design offers a competitive salary, a chance to grow and learn, a generous benefits package, in addition to providing you with the opportunity to be a part of a dynamic and growing company. Full-Time Benefits include: Company contributed medical insurance, as well as dental and vision insurance. Company provided life insurance and disability, as well as voluntary life insurance options. Paid vacation and sick leave, as well as 8 paid holidays. Employee Assistance, Travel Assistance, and Identify Theft Protection coverages. Simple IRA Retirement Savings with company match. Footwear voucher plan with Red Wing Shoes. Tools stipend. Additional perks - Friday breakfasts, reduced priced BJ's membership. Work Hours - Typically Monday to Friday 7:00 am to 3:30 pm. Overtime will be required. If you are interested and feel you are qualified for this position, then please apply. We would love to hear from you. To learn more about Atlantic Design, visit ****************************** . Atlantic Design is an Equal Opportunity Employer. Candidates must be able to pass a pre-employment drug screening after a conditional job offer.

There is a reason that Clark is a leader in the construction industry. Simply put, it's our people. From highways to hotels and residential housing to railways, we rely on the leadership, talents, and drive of our employees to bring great projects to light. Are you interested in becoming a part of our team? If so, take the next step and start building your career with us today. **Responsibilities:** + Selects type and size of pipe and related materials and equipment, such as supports, hangers, and valves, according to job specifications. + Assists foreman in planning the sequence of installation to avoid obstructions and activities of other workers. + Cuts pipe using a pipe cutter, pipe saw, power tools (band saw), and pipe cutting machine. + Threads pipe using threading machine. + Knowledge in safe operation of Victaulic roll grooving and cut groove operations. + Mounts pipe hangers and brackets on walls and ceiling to hold pipe. + Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded, wrapped, soldering, brazen, fused, or cemented joints, and hand tools. + Secures pipes to structure with bracket, clamps, and hangers, using hand and power tools. + Knowledge in safe and professional testing of piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. + Observes and complies with all safety and project rules and all company policies and procedures. + Has working knowledge of working around heavy machinery to include hydraulic and lattice cranes. + Ability to rig and signal loads as required. + Ability to set and align process equipment like pumps and blowers. + Conducts field layout of the piping system and calculates offsets, miters, and fittings as required. + Performs other duties as required. + Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships **Qualifications:** + Always attentive to detail and alert to ensure safety. + Certified Pipe Welding + Ability to receive and follow instructions and communicate with co-workers. + Ability to read labels, safety warnings, and guidelines. + Ability to read drawings including but not limited to pipe shop drawings, mechanical drawings, and P&ID's + Excellent physical fitness with the ability to lift heavy objects. + Good communication skills Compensation Range: $25/hr - $35/hr **Physical Demands** The physical demands described below are representative of those necessary for an employee to successfully perform the essential functions of this role on a construction site. This role requires significant physical exertion, including the ability to navigate active construction areas with uneven terrain, temporary and permanent stairs, ladders, scaffolding, and personnel hoists. Constant standing, walking, and performing repetitive physical tasks are required daily. The employee must frequently lift, carry, push, and pull materials and equipment weighing up to 50 pounds and occasionally lift and/or move objects weighing over 50 pounds with assistance or team lifting techniques. This position requires frequent bending, stooping, kneeling, crouching, climbing, and reaching (above and below shoulder level). The employee must possess sufficient physical dexterity and balance to work safely at various heights and in confined spaces. Visual acuity (including close, distance, peripheral, and depth perception, and the ability to adjust focus) is essential for tasks such as reading instructions, operating equipment, and ensuring safety. Adequate hearing (with or without assistive devices) is required to understand instructions and warnings in a noisy environment. **Work Environment** The work environment characteristics described below are representative of those an employee encounter while performing the essential functions of this role at a Clark Construction site. The employee will regularly work outdoors and may be exposed to varying and potentially extreme weather conditions, including heat, cold, wind, rain, and snow. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards. Work regularly occurs at heights and in confined spaces. The employee must be able to work safely around heavy equipment and construction traffic. The noise level in the work environment is typically loud, requiring the consistent use of appropriate personal protective equipment (PPE), including hearing protection, and adherence to all Clark Construction's comprehensive safety policies, procedures, and all applicable federal, state, and local laws. Due to the nature of the projects, deadlines, and client's requirements, the role frequently requires working more than 40 hours per week. Clark Construction Group is one of the largest building and infrastructure companies in the United States. Our portfolio spans every major building market, from public to private, corporate to cultural, education to entertainment, and the infrastructure connecting it all - power, transportation, water, and roadways. Since 1906, we've been delighting and delivering value to our clients and project partners, providing diverse opportunities for our team, and strengthening the communities where we live. With offices strategically located across the country, we pride ourselves on being a local builder with national reach. Learn more about Clark Construction (*********************************** . There is a sense of camaraderie that comes with delivering impactful projects as a team. It creates a sense of humility and fosters pride in the work we do. At Clark, we are proud to build what matters, together. Learn more about careers at Clark (****************************************** . Find even more opportunities with the Clark Group, our collection of companies - delivering construction and asset solutions for clients across the United States. Clark Group's capabilities span the entire asset lifecycle - from project development and financing to construction and facility maintenance. **_Asset Solutions_** **Altura Associates (********************************************* **Coda** **Edgemoor Infrastructure & Real Estate (************************************************ **S2N Technology Group** _Building & Infrastructure_ **Atkinson Construction (*********************************************** **Shirley Contracting Company** **C3M Power Systems (************************************************** **_Equal Opportunity Employer_** Clark Construction Group, LLC (and its subsidiaries and affiliates) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark promotes a drug-free workplace. Applicants have rights under Federal Employment Laws: Family and Medical Leave Act (FMLA), Equal Employment Opportunity (EEO), and Employee Polygraph Protection Act (EPPA). Clark is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please email ************************************ or call ************** and let us know the nature of your request and your contact information. **_Authorization to Work_** Applicants must be currently authorized to work in the US on a full-time basis in order to be considered. Equal Opportunity Employer: Clark Construction Group, LLC, (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark Construction promotes a drug-free workplace.

MMF is a division of MAC specializing in structural steel fabrication and modification. We serve a diverse client base including general contractors, universities, government entities, and private companies. Our fabrication shop produces high-quality steel components for commercial buildings, institutional facilities, and custom structural applications. Our Apprentice Fabrication Welder plays a key role in producing steel components that meet precise specifications for a variety of construction and infrastructure projects. This shop-based position requires proficiency in multiple welding processes, attention to detail, and a commitment to safety and quality. Requirements Key Responsibilities · Fabricate and weld steel components using GMAW (MIG), SMAW (Stick), and FCAW (Flux Core) processes. · Interpret and work from detailed blueprints, shop drawings, and welding symbols. · Operate fabrication equipment including saws, grinders, drills, and presses. · Perform layout and fit-up of steel assemblies prior to welding. · Conduct visual inspections and measurements to ensure weld quality and dimensional accuracy. · Maintain welding equipment and tools in good working condition. · Follow all safety protocols and contribute to a clean, organized shop environment. · Collaborate with supervisors and project teams to meet production schedules and quality standards. Qualifications · High school diploma or GED required. · Minimum 2 years of experience in structural steel fabrication or welding (current enrollment in CTC or CC welding program can substitute for experience). · Proficiency in GMAW, SMAW, and FCAW welding techniques. · Ability to read and interpret technical drawings and welding symbols. · Familiarity with fabrication shop tools and equipment. · Ability to work flexible schedules, including overtime or weekends when needed. · Willingness and ability to obtain certifications required for specific tasks and equipment operation. · Strong understanding of OSHA safety standards and shop safety practices. PHYSICAL DEMANDS AND WORK ENVIRONMENTAL FACTORS (The factors described here are representative of those physical demands that must be met by an employee to successfully perform the essential functions of this job. The environmental factors described are representative of those encountered while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 60 pounds and move up to 10 feet. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Salary Description 21.00-25.00

Work Hours: 6:00 AM to 2:30 PM, Monday through Friday Pay Range: $21-$31 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is seeking a highly motivated and experienced Welder to join our production team in Chestertown, MD! If you are a precision-focused craftsperson proficient in both MIG and TIG welding and ready to contribute to the creation of high-quality, essential industrial products, we invite you to apply! Who We Are: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: In this crucial role, you will be responsible for executing high-quality welds and preparing materials to meet our strict production standards. Precision Welding: Perform production-level MIG (GMAW) and TIG (GTAW) welding on specialized industrial fluid transfer products, ensuring all work meets required specifications and quality control standards. Material Preparation: Execute essential pre-weld processes, including sandblasting, grinding, and manual machining (e.g., use of lathes or mills for prep), to guarantee optimal material fit and weld integrity. Quality & Safety: Adhere strictly to all safety protocols and procedures, maintain a clean and organized work area, and regularly inspect finished welds for quality assurance. Equipment Maintenance: Perform routine maintenance and calibration of welding equipment to ensure reliable performance. What We're Looking For: High school diploma or GED required. Successful completion of a formal vocational/technical welding program or apprenticeship is strongly preferred. Proven professional production welding experience, specifically utilizing MIG and TIG processes. Demonstrated ability to read and interpret blueprints, schematics, and welding symbols (e.g., AWS standard symbols) to achieve precise fit-up and weld dimensions. Ability to safely lift and manipulate materials and stand for extended periods, as required by the production environment. Current or verifiable past welding certifications (e.g., AWS certifications) are a significant advantage. What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Full-time Description Capitol Boiler Works, Inc. is a well-established mechanical contracting company offering true 24/7/365 service in all mechanical crafts. CBW serves the DC Metro area and parts of West Virginia and Delaware, with offices in Springfield, VA, Richmond, VA, Hebron MD, and Baltimore, MD. Our primary focus is commercial and industrial customers in the region, with a specialty in property management companies. Capitol Boiler Works, Inc. is a privately held company serving the region since 1936. CBW is currently seeking the right individual to fill a full-time opening for Commercial Welder/Fabricator. We offer a competitive benefits package including: Medical Dental Vision Life & Disability Supplemental Ins. 401k Flexible Spending Account (FSA) Health Savings Account (HSA) ESSENTIAL DUTIES AND RESPONSIBILITIES may include any/all of the following: Lays out, positions, and secures parts and assembles according to specifications, using straight edge, combination square, calipers, and ruler. Tack-welds or welds components and assembles using electric, gas, arc, or other welding equipment. Cuts work piece, using powered saws hand shears or chipping knife. Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form. Installs or repairs equipment such as lead pipes, valves, floors, and tank linings. Observes tests on welded surfaces such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications. Inspects grooves, angles, or gap allowances using a micrometer, caliper, and precision measuring instruments. Removes rough spots from work piece, using portable grinder, hand file or scraper. Welds components in flat, vertical, or overhead positions. Heats, forms, and dresses metal parts using hand tools, torch, or arc welding equipment. Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc/ Analyzes engineering drawing and specifications to play layout, assembly, and welding operations. Develops templates and other work aids to hold and align parts. Use safe work habits and operate safety equipment properly. Determines equipment and welding method, applying knowledge or metallurgy, geometry, and welding techniques. Examine workpieces for defects. Measure workpieces with straightedges or templates to meet specifications. Primarily uses stick welding 60-10 and 70-18. Need to be able to certify in 6G position. Documents tests and inspection dates and results. Maintains inventory records for welding supplies used and utilized on jobs. Use straightedges, combination squares, rulers, and calipers to lay out, position, alight, and secure parts and assemblies prior to assembly. Operate hand and power tools such as shielded metal arc and gas metal arc welding equipment. Completes work orders, list materials issued and used, and documents work repairs. Assists area staff as needed. Ensures that management is appropriately informed of area activities and of any significant problems. Ensures regulatory requirements and established procedures are met. Follows safety requirements. Ensures that work area is clean, secure, and well maintained. Completes special projects as assigned. Attends and participates in meetings as required Apprentices shall perform all duties listed above under the guidance of a journeyman mechanic combined with on-the-job training and any additional schooling as required. Requirements EDUCATION AND EXPERIENCE High school education/G.E.D. At least 3 years of experience in welding (Prior certification required). LANGUAGE SKILLS Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Ability to write complex sentences, using proper punctuation, and using adjectives and adverbs. Able to communicate in complex sentences, using normal word order with present and past tenses with good vocabulary. QUALIFICATION STANDARDS Ability to perform essential job functions consistent safely and successfully with ADA, FMLA, and other federal, state, and local standards/requirements. Ability to meet and maintain all qualitative and/or quantitative productivity standards. Ability to maintain reasonably regular and punctual attendance consistent with ADA, FMLA and other federal, state, and local standards/requirements. Compliance with all personnel policies and practices. Ability to comprehend and carry out safety sensitive duties according to company policies, procedures, and safe work practices. Salary Description $33 - $60 per hour depending upon experience.

Job Description VMG is seeking an experienced Welder to support large-scale commercial HVAC and plumbing construction projects. This role is responsible for performing high-quality welding and fabrication work in accordance with project specifications, safety standards, and applicable codes. Key Responsibilities Perform welding on carbon steel, stainless steel, and other materials used in HVAC and plumbing systems Fabricate, assemble, and install piping components per project drawings and specifications Read and interpret blueprints, shop drawings, and isometric drawings Ensure welds meet quality standards and pass inspections Maintain compliance with safety regulations, company policies, and jobsite requirements Inspect welds and make necessary repairs or adjustments Collaborate with foremen, superintendents, and field crews to meet project schedules Job Requirements 2+ years of welding experience in commercial construction (HVAC or plumbing preferred) Proficiency in welding processes such as Stick (SMAW), MIG (GMAW), and/or TIG (GTAW) Ability to read and understand construction drawings and welding symbols Knowledge of welding safety practices and procedures Experience working with piping systems is strongly preferred Ability to work in confined spaces, on ladders, and at heights Ability to lift: Up to 10 lbs regularly Up to 50 lbs frequently Over 75 lbs occasionally with assistance Willingness to travel to job sites throughout the DMV area Preferred Qualifications Welding certifications (AWS, ASME, or equivalent) Experience with commercial HVAC piping or plumbing systems Familiarity with local building and safety codes Why Join VMG? Vertical Mechanical Group is a full-service HVAC and Plumbing contractor specializing in large-scale commercial projects. We offer competitive pay, steady work, growth opportunities, and a strong safety-first culture.

Description: About Us: Structural Iron Erectors (SIE) is a leading fabricator and supplier of all types of steel used in many major construction projects such as large scale commercial and residential buildings. Our quality is visible throughout the Metropolitan area of Washington D.C., Virginia, and Maryland. At SIE, we are committed to fostering a safe and productive work environment. SIE is seeking a highly skilled Welder to join our team. The Welder is critical to the success of our construction projects. Job Summary: The Welder is responsible for welds and assembles metal pieces and products by using handheld welding equipment. The Welder sets up parts for welding; uses hand tools, clamps, jigs and fixtures. The Welder works from specifications, drawings, weld symbols and prepares and completes work on materials by welding, cutting, grinding and cleaning metal. Supervisory Responsibilities: None Duties/Responsibilities: Perform MIG, and Stick welding on steel components (field work). Read and interpret blueprints, drawings, and specifications to determine layout and installation requirements. Weld structural steel components using FCAW, SMAW, or GMAW processes. Follow shop drawings, welding symbols, and AISC/AWS D1.1 welding codes. Ensure welds meet project specifications and safety standards. Inspect completed work to ensure compliance with plans, specifications, and quality standards. Set up, operate, and maintain welding equipment and tools. Conduct visual inspections and participate in quality assurance processes. Install decking, stairs, handrails, and other fabricated components. Maintain a clean, organized, and safe work area. Performing other duties as assigned by the Foreman and/or Superintendent. Requirements: Qualifications: High school diploma or equivalent. Proven experience as a structural welder (2+ years preferred). AWS D1.1 welding certification preferred or ability to obtain. Ability to read and interpret structural blueprints and welding symbols. Familiarity with standard shop tools, measuring devices, and fabrication equipment. Commitment to safety and quality. Travel Requirements: As required to the job site. (Field work) Physical Requirements: Be physically active for long periods without getting tired or out of breath. Bend, stretch, twist, or reach out. Keep or regain the body's balance or stay upright when in an unstable position. See objects in very bright or glaring light. Equal Opportunity Employer: SIE is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, or any other status protected by law. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Welder Talent Pipeline | Ongoing Talent Pipeline | Always Hiring! Location: GlobalWhere: Onsite OpportunitiesClearance: Preferred (varies by role) Employment Type: Full-time Who We Are Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, both domestically and internationally, to tackle their most complex infrastructure challenges with integrity, respect, responsibility, and professionalism. If you are a skilled welder with expertise in fabrication, maintenance, and structural welding for mission-critical operations, we encourage you to join our Welder Talent Pipeline today! This position description is subject to change at any time as needed to meet the requirements of the program or company. Responsibilities Roles We're Hiring For We are always hiring across all levels for welding positions, including but not limited to: Mid-Level (3-7 Years Experience) + Structural Welder + Pipe Welder + Fabrication Specialist + Welding Technician Senior-Level (7+ Years Experience) + Senior Welder + Welding Foreman + Welding Inspector + Welding Supervisor Qualifications Why Join V2X's Welder Talent Pipeline? Career Growth: Access professional development, advanced certifications, and leadership training.Competitive Benefits: Market-leading salaries, full benefits, and global career mobility.Mission-Driven Work: Support and execute critical welding and fabrication projects that sustain military, defense, and operational infrastructures worldwide. Who Should Apply? We are looking for experienced welding professionals with expertise in:✔ MIG, TIG, and Arc welding✔ Pipe and structural welding✔ Blueprint reading and metal fabrication✔ Repair and maintenance of military and industrial equipment✔ Safety compliance and quality inspections✔ Government, defense, and mission-critical welding operations Certifications such as AWS Certified Welder, ASME Welding Certifications, OSHA Safety Certifications, and DoD-specific welding qualifications are highly valued. Join V2X - Ongoing Talent Pipeline | Always Hiring Welders! At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.

Job Title: Welder Fabricator Division: Custom Metals Reports To: Metal Fabrication Shop Supervisor FLSA Status: Non-Exempt This position welds and fabricates objects and assemblies from various types of metal including steel, stainless steel, and aluminum. Position will require the coordination with other welders and trades. Position will be required to fabricate stairs, handrails, guardrails, and other miscellaneous metal objects as required. ESSENTIAL DUTIES AND RESPONSIBILITIES (“Incidental” job duties may be included but must be indicated. Other essential and incidental job duties may be assigned. Read and understand blueprints and engineering plans and develops and design welding or fabrication projects. Responsible to review work plans and drawings to identify potential conflicts and correct prior to fabrication. Review and update fabrication drawings as needed. Maintain and submit as built drawings for projects. Fabricate stairs, handrails, guardrails, and other miscellaneous metal objects as required. Operate shop equipment, forklifts, various types of welders and fabrication equipment. Responsible for self-development. Take necessary training to remain current with welding and fabrication techniques, tools, and equipment. Responsible to inspect welds and fabrication of all projects. Ensure inspection includes the review of welds for durability as well as meeting specified standards. Inspect and examine to determine if repairs or new equipment is needed. Identify materials or equipment that will need protection before welding, grinding or fabrication commence. Take a leadership role in shop or field operations when a foreman is not present or available. Build and develop trusting relationships with current customers and seek to identify opportunities to grow our customer base and build positive relationships. EDUCATION, QUALIFICATIONS, AND/OR EXPERIENCE (Include necessary license and specialized training.). Minimum of 3 years' experience in Shop Fabrication Valid Driver's License Obtain and maintain a current CDL Must have proven ability to read and interpret blueprints and engineering plans and create detailed shop drawings. Demonstrated ability to fabricate and lay out, cut, fit, measure and weld various metals to create the desired shape or object. Requires advanced knowledge of many fabrication techniques and tools. Proven ability to weld Stainless Steel and Aluminum handrails, guardrails, tube, pipe and structural members Ability to use heavy machinery, such as forklifts and cranes Basic math skills and mechanical aptitude Ability to read blueprints and recognize welding symbols and specifications Knowledge of industry safety practices Knowledge of specific welding processes, such as GTAW, GMAW, SMAW and FCAW. AWS Certified D1.1. Required AWS Certified D1.2 and D1.3 Preferred. Proficiency in cutting metal using oxy-acetylene and plasma operations. Knowledge of specific use of shop equipment including, shear, press, ironworker, drill press, various metal cutting saws etc. PHYSICAL DEMANDS AND WORK ENVIRONMENTAL FACTORS (The factors described here are representative of those physical demands that must be met by an employee to successfully perform the essential functions of this job. The environmental factors described are representative of those encountered while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 60 pounds and move up to 10 feet. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud.

Work Hours: 6:00 AM to 2:30 PM, Monday through Friday Pay Range: $21-$31 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is seeking a highly motivated and experienced Welder to join our production team in Chestertown, MD! If you are a precision-focused craftsperson proficient in both MIG and TIG welding and ready to contribute to the creation of high-quality, essential industrial products, we invite you to apply! Who We Are: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: * In this crucial role, you will be responsible for executing high-quality welds and preparing materials to meet our strict production standards. * Precision Welding: Perform production-level MIG (GMAW) and TIG (GTAW) welding on specialized industrial fluid transfer products, ensuring all work meets required specifications and quality control standards. * Material Preparation: Execute essential pre-weld processes, including sandblasting, grinding, and manual machining (e.g., use of lathes or mills for prep), to guarantee optimal material fit and weld integrity. * Quality & Safety: Adhere strictly to all safety protocols and procedures, maintain a clean and organized work area, and regularly inspect finished welds for quality assurance. * Equipment Maintenance: Perform routine maintenance and calibration of welding equipment to ensure reliable performance. What We're Looking For: * High school diploma or GED required. Successful completion of a formal vocational/technical welding program or apprenticeship is strongly preferred. * Proven professional production welding experience, specifically utilizing MIG and TIG processes. * Demonstrated ability to read and interpret blueprints, schematics, and welding symbols (e.g., AWS standard symbols) to achieve precise fit-up and weld dimensions. * Ability to safely lift and manipulate materials and stand for extended periods, as required by the production environment. * Current or verifiable past welding certifications (e.g., AWS certifications) are a significant advantage. What We Offer: * Medical, dental, and vision insurance for you and your family * Competitive salary * Bonus programs * 401K retirement plan * Training opportunities * Tuition reimbursement * Paid vacation, PTO, and holidays * Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job Description Welder Work Hours: 6:00 AM to 2:30 PM, Monday through Friday Pay Range: $21-$31 per hour Make the Right Connection-Build Your Career with Dixon! The Dixon Group is seeking a highly motivated and experienced Welder to join our production team in Chestertown, MD! If you are a precision-focused craftsperson proficient in both MIG and TIG welding and ready to contribute to the creation of high-quality, essential industrial products, we invite you to apply! Who We Are: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: In this crucial role, you will be responsible for executing high-quality welds and preparing materials to meet our strict production standards. Precision Welding: Perform production-level MIG (GMAW) and TIG (GTAW) welding on specialized industrial fluid transfer products, ensuring all work meets required specifications and quality control standards. Material Preparation: Execute essential pre-weld processes, including sandblasting, grinding, and manual machining (e.g., use of lathes or mills for prep), to guarantee optimal material fit and weld integrity. Quality & Safety: Adhere strictly to all safety protocols and procedures, maintain a clean and organized work area, and regularly inspect finished welds for quality assurance. Equipment Maintenance: Perform routine maintenance and calibration of welding equipment to ensure reliable performance. What We're Looking For: High school diploma or GED required. Successful completion of a formal vocational/technical welding program or apprenticeship is strongly preferred. Proven professional production welding experience, specifically utilizing MIG and TIG processes. Demonstrated ability to read and interpret blueprints, schematics, and welding symbols (e.g., AWS standard symbols) to achieve precise fit-up and weld dimensions. Ability to safely lift and manipulate materials and stand for extended periods, as required by the production environment. Current or verifiable past welding certifications (e.g., AWS certifications) are a significant advantage. What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Atlantic Design, Inc is an established leader in the design of custom equipment for the blasting and coating industry. We are currently seeking Manufacturing Mechanics with a strong work ethic for our growing company in the Baltimore area. This is a full-time position with benefits. Mechanics are responsible for a variety of mechanical and welding tasks in order to assemble stock parts and install pre-fabricated structural components in the building of our equipment. Duties include joining, repairing, and performing light fabrication of metal and other weldable material by applying appropriate welding techniques and operating various welding / fitting / fabrication tools. Must maintain productivity and quality output. We are looking to invest in career-minded applicants. If you have a positive attitude, good work ethic, are safety conscious, and have a willingness to learn, then we welcome you to apply. Our employees are vital to our success, which is why we hire people for careers, not jobs. Expectations / Qualifications: * Some relevant mechanical and manufacturing experience required. * Training and/or prior experience with Mig welding, to include a basic understanding of machines and tools used in welding. * High School diploma or GED. * Good general math skills and ability to read tape measure. * Strong hand/power tool knowledge and experience. * Ability to follow instructions and work independently. * Dependable with strong attention to detail. * Ability to read blueprints and weld symbols preferred. * Must be capable of physical demands of the position including walking, standing, climbing, bending, twisting, pushing, pulling and lifting/moving (up to 50 pounds). * Must be able to work in a manufacturing environment, recognizing various sounds and temperatures. * Must have a driver's license. * Must be willing to work overtime. * Must be able to pass Drug screening test. Starting pay will be $20 to $23 per hour, depending on experience and training needed. We may be willing to pay more based on applicable mechanical and mig welding work experiences (we do conduct a weld test). Benefits: Atlantic Design offers a competitive salary, a chance to grow and learn, a generous benefits package, in addition to providing you with the opportunity to be a part of a dynamic and growing company. Full-Time Benefits include: * Company contributed medical insurance, as well as dental and vision insurance. * Company provided life insurance and disability, as well as voluntary life insurance options. * Paid vacation and sick leave, as well as 8 paid holidays. * Employee Assistance, Travel Assistance, and Identify Theft Protection coverages. * Simple IRA Retirement Savings with company match. * Footwear voucher plan with Red Wing Shoes. * Tools stipend. * Additional perks - Friday breakfasts, reduced priced BJ's membership. * Work Hours - Typically Monday to Friday 7:00 am to 3:30 pm. Overtime will be required. If you are interested and feel you are qualified for this position, then please apply. We would love to hear from you. To learn more about Atlantic Design, visit ******************************* Atlantic Design is an Equal Opportunity Employer. Candidates must be able to pass a pre-employment drug screening after a conditional job offer.

There is a reason that Clark is a leader in the construction industry. Simply put, it's our people. From highways to hotels and residential housing to railways, we rely on the leadership, talents, and drive of our employees to bring great projects to light. Are you interested in becoming a part of our team? If so, take the next step and start building your career with us today. Responsibilities: Selects type and size of pipe and related materials and equipment, such as supports, hangers, and valves, according to job specifications. Assists foreman in planning the sequence of installation to avoid obstructions and activities of other workers. Cuts pipe using a pipe cutter, pipe saw, power tools (band saw), and pipe cutting machine. Threads pipe using threading machine. Knowledge in safe operation of Victaulic roll grooving and cut groove operations. Mounts pipe hangers and brackets on walls and ceiling to hold pipe. Assembles and installs a variety of metal or nonmetal pipes and pipe fittings, using threaded, wrapped, soldering, brazen, fused, or cemented joints, and hand tools. Secures pipes to structure with bracket, clamps, and hangers, using hand and power tools. Knowledge in safe and professional testing of piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. Observes and complies with all safety and project rules and all company policies and procedures. Has working knowledge of working around heavy machinery to include hydraulic and lattice cranes. Ability to rig and signal loads as required. Ability to set and align process equipment like pumps and blowers. Conducts field layout of the piping system and calculates offsets, miters, and fittings as required. Performs other duties as required. Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships Qualifications: Always attentive to detail and alert to ensure safety. Certified Pipe Welding Ability to receive and follow instructions and communicate with co-workers. Ability to read labels, safety warnings, and guidelines. Ability to read drawings including but not limited to pipe shop drawings, mechanical drawings, and P&ID's Excellent physical fitness with the ability to lift heavy objects. Good communication skills Compensation Range: $25/hr - $35/hr Physical Demands The physical demands described below are representative of those necessary for an employee to successfully perform the essential functions of this role on a construction site. This role requires significant physical exertion, including the ability to navigate active construction areas with uneven terrain, temporary and permanent stairs, ladders, scaffolding, and personnel hoists. Constant standing, walking, and performing repetitive physical tasks are required daily. The employee must frequently lift, carry, push, and pull materials and equipment weighing up to 50 pounds and occasionally lift and/or move objects weighing over 50 pounds with assistance or team lifting techniques. This position requires frequent bending, stooping, kneeling, crouching, climbing, and reaching (above and below shoulder level). The employee must possess sufficient physical dexterity and balance to work safely at various heights and in confined spaces. Visual acuity (including close, distance, peripheral, and depth perception, and the ability to adjust focus) is essential for tasks such as reading instructions, operating equipment, and ensuring safety. Adequate hearing (with or without assistive devices) is required to understand instructions and warnings in a noisy environment. Work Environment The work environment characteristics described below are representative of those an employee encounter while performing the essential functions of this role at a Clark Construction site. The employee will regularly work outdoors and may be exposed to varying and potentially extreme weather conditions, including heat, cold, wind, rain, and snow. The work environment frequently involves exposure to moving mechanical equipment, high noise levels, dust, fumes, airborne particles, vibrations, and potential electrical hazards. Work regularly occurs at heights and in confined spaces. The employee must be able to work safely around heavy equipment and construction traffic. The noise level in the work environment is typically loud, requiring the consistent use of appropriate personal protective equipment (PPE), including hearing protection, and adherence to all Clark Construction's comprehensive safety policies, procedures, and all applicable federal, state, and local laws. Due to the nature of the projects, deadlines, and client's requirements, the role frequently requires working more than 40 hours per week.