Fabricator jobs in Hawaii

**Req ID:** RQ207225 **Type of Requisition:** Regular **Clearance Level Must Be Able to Obtain:** Secret **Public Trust/Other Required:** None **Job Family:** Field Service and Support **Skills:** Scaffolding Safety,Ship Maintenance,Ship Repair **Certifications:** Certified Welder (CWP) | American Welding Society (AWS) - American Welding Society (AWS) **Experience:** 2 + years of related experience **US Citizenship Required:** Yes **Job Description:** Welder (US Navy Submarine) **Onsite Locations:** Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Welder (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. **Welder Tasks** + Perform structural welding of deck structures, support braces, foundations, or hangers using one of a number of processes such as shielded metal arc welding (SMAW) or gas tungsten arc welding (GTAW) onboard submarines, in buildings and in the field. + Prepare finished welds by hand grinding or burring to meet visual acceptance standards. + Set up and operate stud welding equipment as needed onboard submarines, in buildings and in the field. + Install hot work protection and/or build weld containments for fire prevention. + Perform firewatch duties during welding operations. **Requirements** + 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. + HS/GED + Must be US Citizen. + Confidential Security Clearance or higher level required. Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOW type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of War Personnel Security Clearance (PCL) at the confidential level or higher. **Welder Skill Requirements** At least 2 years of experience welding in a heavy industrial work environment such as ship building, power plant construction, commercial building construction or bridge construction. Qualified per Technical Publication S9074-AQ-GIB-010/248 with the following essential elements: Welder Qualification record verifying tests performed in three positions. Alternatively, the welder tests may be performed in the 6G position (from TP-248) provided the test is performed using a singular weld process. No dual process qualifications will be accepted. The welder qualification test record shall include at least the following information: Welder Identification (Full Name at a minimum) Date of test Qualification Test thickness - test assembly thickness .375" or higher Qualification test process (SMAW, GTAW, or GMAW as applicable) Qualification test position (2G, 3G, 4G, or 6G) Qualification test base material type Qualification test filler material type and size Qualification test results Certifying signature (fabricator, test administrator or quality assurance officer attesting to test conditions and results) The welder qualification test shall be performed as follows: + The qualification testing shall have been performed with an approved Butt weld joint design from MIL-STD 22 + The filler material to be used during testing shall be MIL-9018-M, 10018M, 10718M, 11018M, 12018M or 14018M for the SMAW process The filler material to be used during testing shall be MIL-100S-1, 100S-2, 120S-1, or 140S-2 for the GTAW or GMAW process. The Qualification Test shall be evaluated IAW with the requirements contained in S9074-A-GIB018/248 (performed IAW T9074-AS-GIB-010/271, (TP 271) evaluated to class 1 requirements of MIL-STD 2035). Qualification tests shall be evaluated visually and by Radiography, ultrasonically, or by bend testing. The qualification shall have been maintained by actual use of the welding process quarterly (evidence of maintenance for process use shall be maintained for the current and preceding quarter) Jaeger J-1 or equivalent Annual Vision certification (glasses or no glasses) Undergo training to self-identify and correct poor workmanship. This training is a 40-hour course that includes a written and practical examination. A grade of 80% or better is required on each to be considered passing. Trained, qualified fit to wear respiratory protection devices IAW 29 CFR 1910.134 (Subpart I). Welder Technical Standards National Fire Protection Association (NFPA) Standard 51B, 2014 Edition - Standard for Fire Prevention during Welding, Cutting and Other Hot Work. ANSI/ASC Z49.1-2005 - Safety in Welding, Cutting, and Allied Processes NAVSEA S9086-CH-STM-010, Chapter 074 - Welding and Allied Processes Compressed Gas Association (CGA) SB-11 - Use of Rubber Welding Hose NAVSEA Tech Pub S9074-AQ-GIB-010/248 NAVSEA Tech Pub S9074·AR-GIB-010/278 NAVSEA Tech Pub T9074-AD-GIB-010/1688 29 CFR 1910.134 Respiratory Protection 9.3.9.4 Required Trade Skill Training Blueprint Reading Electrical Safety for Non-electrical workers Layout Procedures Set-up & Use of Hot Work Containments Stud-shooting techniques Selecting and Wearing Respirators **GDIT IS YOUR PLACE** At GDIT, the mission is our purpose, and our people are at the center of everything we do. ● Growth: AI-powered career tool that identifies career steps and learning opportunities ● Support: An internal mobility team focused on helping you achieve your career goals ● Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off ● Community: Award-winning culture of innovation and a military-friendly workplace **OWN YOUR OPPORTUNITY** Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. **\#SubAIT** **\#hireshipyardcareersgdit** The likely hourly rate for this position is between $40.35 - $54.59. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at ******************** Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Primary Function: Assists journey-level welders and maintenance staff with installations, repairs, and preventive maintenance work. Supports the welding team by preparing materials, tools, equipment, and work areas. Performs basic tasks to help maintain equipment operation and extend equipment life. Performs routine and entry-level tasks associated with welding and mechanical repair. Assists in identifying equipment issues and reports findings to a supervisor or journey worker. Supports work on equipment such as fans, pumps, conveyors, pipelines, mobile equipment, pulpers, ripe green separators, tractors, trailers, tanks, gates, trash racks, planting and harvesting equipment, etc. Examples of Work Performed: Follows all safety rules and participates in safety-related activities as directed. Assists with preparation of materials, tools, and equipment for welding and maintenance tasks. Helps maintain history files, drawings, and other records by providing updated information to journey workers or supervisors. Helps read or interpret basic blueprints, sketches, or instructions when laying out work under direction. Assists in the installation, repair, and maintenance of company equipment and facilities including mobile/stationary equipment, pipelines, valves, pump stations, conveyors, pulpers, and related coffee factory equipment. Helps disassemble equipment, clean parts, and check for visible wear or damage, reporting issues to a journey worker. Works with other staff to locate materials, prepare tools, and support job setup and cleanup. Assists in constructing simple jigs or fixtures under direction. Prepares metal surfaces and materials for welding or fabrication, including cutting, grinding, and cleaning. Performs general cleanup of job sites and shop areas to maintain a safe and organized work environment. Assists with basic filing, chipping, and fitting on machinery parts as instructed. Participates in on-the-job training to develop skills in welding, fabrication, and maintenance techniques. May be assigned to assist in other areas of the plantation within this skill level. Assists Journey workers with lift and rigging procedures and helps ensure equipment is set up safely. Learns proper operation of machine shop fabrication equipment under supervision. May be required to obtain and maintain necessary certifications or licenses (e.g., driver's license Tools & Equipment: Assists in the use, maintenance, and preparation of tools such as wrenches, squares, hammers, micrometers, calipers, plumb bobs, chain hoists, air hoists, ropes and tackles, dollies, slings, pipe threaders, pneumatic and electric tools, welding and cutting equipment (oxyacetylene, plasma, electric arc), hand tools, gloves, helmets, goggles, wire welding equipment, etc. Materials: Handles and prepares materials including various metals (steel, cast iron, stainless steel, aluminum, brass, copper) along with welding rods, fluxes, solder, piping, valves, fittings, sprockets, chains, belting, and other materials required to assist journey workers in assigned tasks. Source & Nature of Supervision: Works under close to general supervision from a journey worker, lead worker, or supervisor. Receives instructions and guidance on work assignments and seeks clarification as needed to complete tasks safely and correctly. Direction Exercised: Does not direct other employees. May provide basic assistance to apprentices or less experienced helpers when assigned Note: The above job description indicates the general nature of the responsibilities, requirements and job duties. It is not necessarily an exhaustive list of responsibilities, skills, and requirements associated with the job. While this list is intended to be an accurate reflection of the current job, Kauai Coffee reserves the right to revise the functions and duties of the job or to require that additional or different tasks be performed as directed by management.

Job DescriptionSalary: Starting at $41.28/hr and other great benefits! Service First, Stronger Together, Superior Quality HC&D is the premier supplier of ready-mix concrete and quarry materials. We are seeking qualified individuals to join our HC&D team at our Sand Island location: WELDER 2/C (Night Shift) Sand Island Location Basic welding is required in fabrication, maintenance, and repair of equipment. Relevant evidence of trade certification, formal training, or experience preferred. Able to use tools, machines and equipment common to the trade and can operate equipment incidental to other duties.Able to lift and carry 45+ lbs, climb ladders and catwalks, work in small spaces and on elevated structures, and in various weather conditions. Able to work independently and as a team player. Must have valid drivers license. Deadline to apply: Friday, December 19, 2025 EEO / Affirmative Action Employer

Job Description Applicant must be AWSD1.1 certified and have a minimum 5 years experience in performing welding techniques on various types of materials for heavy equipment repair work, piping and fabrication. Ability to layout preferred. TWIC preferred; DOT physical required. Must be willing to travel, have appropriate tools and clean drivers abstract. NOTE: This position is located on Oahu, Hawaii. No relocation allowance available for this position. This is also a unionized position. You must be willing become a member of the IAMAW Local 1998 union. Salary based on collective bargaining agreement.

SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: * Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor. * Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations. * Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements. * Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data. * Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation. * Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive. * Immediately report all symptoms or suspected symptoms as early and accurately as possible. * Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation. * Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others. * Assist in the training of new personnel or tenders. * Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits. * Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site. * Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others. * Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance. * Ensure their medical certificates are up to date and recorded in their logbook. * Present their logbook to the Diving Supervisor on every job. * Maintain current certification in first aid and CPR. * Complete administrative office duties as assigned. JOB REQUIREMENTS: * Graduate of a professional diving school. * Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability. * Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld). * Significant physical effort required. Significant exposure to physical risk. * Ability to pass annual diving physical. * Ability to obtain a U.S. Government security clearance. * Able and willing, to travel worldwide, on short notice for indefinite periods of time. Ability to pass a pre-employment drug/alcohol screen and physical, as required. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Welder Reports To: Structural Superintendent FULL TIME POSITION-OVERTIME ELIGBILE . PSI is the largest privately owned shipyard in Hawaii, with two of the largest dry docks in the state. We have been in business since 1944 and have a large labor force of skilled craftsman with a full support staff of professionals who comprise of engineering, project management, QA, EHS, accounting, contracts, and human resources. The Welder welds metal components with appropriate equipment to fit and join, fabricate, and/or repair a variety of marine equipment and structural components per specifications and in accordance with the production schedule. Performs SMAW, GMAW, and other welding techniques in all positions of various metal and alloys. Must be familiar with ABS & NAVSEA standards. Pacific Shipyards International, LLC Expectations of Employee: * Is committed to the company values and adheres to all Pacific Shipyards' policies and procedures * Perform duties of his/her job and as assigned by Management * Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully * Communicates regularly with Officers, Managers, & Supervisors about the different divisions and department's issues * Consistently be on time for work, meetings and appointments and deliver work projects by assigned due dates * Maintain assigned work areas in a clean and orderly fashion * Maintain and ensure the safety of all assigned equipment * Perform all duties in conformance to appropriate safety and security standards * Meet productivity goals and quality standards as set by management * Ability to read and understand drawings and specifications * Ability to handle multiple tasks and balance priorities * Computer proficiency in Microsoft Office Essential Duties & Responsibilities: * Performs welding duties using wire welding GMAW (Gas Metal Arc Welding), FCAW (Flux Core Arc Welding), GTAW (Gas Tungsten Arc Welding), or SMAW (Stick Welding) * Weld steel components with welding equipment as specified by procedures, layouts, blueprints, diagrams, work orders, or oral instructions. Welds range from simple tacks to complex welds, performed in varying positions * Works includes set-up, laying out work using fixtures and guides to repair, modify, or fabricate parts and/or equipment products * Operates and/or uses related equipment and tools which include forklifts, hoists, slings, grinders (portable & bench), cutting torches, hand tools, drills, punches, a tape measure, and Air Arc * Keeps equipment operational by completing preventive maintenance requirements; follow manufacturer's instructions; troubleshoot malfunctions; call for repairs and complete the daily check sheets * Reads, understands, and follows job order specifications, blueprints, work instructions, and procedures. * Maintains level of work performance in accordance with standards and/or job order specifications * Participates in process and product development and improvement programs, teams, and focus groups * Maintains a safe working environment by complying with procedures, rules, and regulations. Keep work area clean and clean up after project completion or end of shift as appropriate Education/Training: * High School Diploma or equivalent * Minimum 1 year of related experience required * ASW certification preferred, however, not required * Large scale industrial experience. Marine/shipyard/ship repair experience preferred, however, not required * Experience with computers/electronics preferred * Ability to read blueprints * Ability to work standing on a variety of surfaces including steel decks and concrete for 8-12 hours per day * Ability to work overtime, evenings, weekends, and holidays * Perform work in heavy industrial/shipyard setting with exposure to heat, cold, and humidity, industrial odors, fumes, gasses, chemicals, oil, grease, smoke, dust, noise, and vibration, and involves climbing ladders and stairs, using pneumatic tools, working in cramped quarters, and working with moving machinery * Personal Protective Equipment (PPE) required for this position, including hearing protection, safety glasses, safety boots with metatarsal guards, face shield, welding helmet, welding gloves, welding sleeves/jacket (leather or cloth), and welding apron/chaps. A respirator may also be required Physical Demands: * Maneuvering in tight places, uneven floors * Climbing up and down ladders, ramps and stairs * Standing for long periods of time * Occasionally requires twisting, turning, bending, climbing, and walking over uneven surfaces * Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb. * Lifting and moving objects weighing up to 50 lbs. continuously; * Lifting objects weighing over 50 lbs. with assistance Qualification/Requirements: * Candidates must reside on Oahu, Hawaii. * Must show proof of your legal right to work in the United States * This position requires US Citizenship due to security clearance required for base access * Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC) * Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites * All candidates must submit to and pass a post-offer drug screening, physical test and background check before employment begins. Failure to complete any of these steps will result in disqualification * Valid State of Hawaii REAL ID-Compliant Drivers' License in good standing or a valid U.S. Passport in addition to a valid Hawaii Driver's License, if you do not have a REAL ID-Compliant Driver's License, class 3 or higher * Candidates must have access to reliable transportation to get to work and other job sites on time for the start of shift Additional Information: This position is represented by The International Brotherhood of Boilermakers, Iron Shipbuilders, Blacksmiths, Forgers, and Helpers, AFL-CIO and its Local Lodge 627. Candidates must become a member of the union as a condition of employment. This in no way states or implies that these are the only duties to be performed by the employee filling this position. Employee will be required to follow any other job-related instructions and to perform any other job-related duties requested by management. Management has the right to add to, revise, or delete information in this job description. This document does not create an employment contract, implied or otherwise, other than an "at will" employment relationship. Pay Range: $17.90-$43.38 per hour to commensurate with experience. This is a non-management position This is a full time position

Service First, Stronger Together, Superior Quality HC&D is the premier supplier of ready-mix concrete and quarry materials. We are seeking qualified individuals to join our HC&D team at our Sand Island location: WELDER 2/C (Night Shift) Sand Island Location Basic welding is required in fabrication, maintenance, and repair of equipment. Relevant evidence of trade certification, formal training, or experience preferred. Able to use tools, machines and equipment common to the trade and can operate equipment incidental to other duties. Able to lift and carry 45+ lbs, climb ladders and catwalks, work in small spaces and on elevated structures, and in various weather conditions. Able to work independently and as a team player. Must have valid driver's license. Deadline to apply: Friday, December 19, 2025 EEO / Affirmative Action Employer

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor. Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations. Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements. Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data. Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation. Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive. Immediately report all symptoms or suspected symptoms as early and accurately as possible. Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation. Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others. Assist in the training of new personnel or tenders. Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits. Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site. Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others. Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance. Ensure their medical certificates are up to date and recorded in their logbook. Present their logbook to the Diving Supervisor on every job. Maintain current certification in first aid and CPR. Complete administrative office duties as assigned. JOB REQUIREMENTS: Graduate of a professional diving school. Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability. Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld). Significant physical effort required. Significant exposure to physical risk. Ability to pass annual diving physical. Ability to obtain a U.S. Government security clearance. Able and willing, to travel worldwide, on short notice for indefinite periods of time. Ability to pass a pre-employment drug/alcohol screen and physical, as required. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status