Fabricator jobs in Jacksonville, FL - 36 jobs

Engage in the manufacturing and assembly of Industrial Power Systems within a heavy-industrial manufacturing facility. This role involves mechanical assembly, working with sheet metal, and assembling metal enclosures for the systems. Dealing with hand/power tools including: drills, tape measure, screw drivers, wrenches, and impact tools. Units are on average 8 ft. tall and some of the assembly will take place inside of the unit. **Responsibilities** + Perform mechanical assembly of industrial power systems using hand and power tools. + Work with sheet metal to assemble metal enclosures. + Interpret and assemble units based on blueprints. + Assemble some units inside, which are approximately 8 ft. tall. **Essential Skills** + Experience with hand and power tools is required. + Ability to read and interpret blueprints is a plus, but not required + Proficiency in using a tape measure is mandatory. + Physical ability to stand for the entire shift and lift 50+ pounds. **Additional Skills & Qualifications** + Prior manufacturing assembly experience is preferred. + Comfortable with general labor tasks and mechanical assembly. **Shift and Pay** + 2nd shift: 2pm-10:30pm + $17.50 - 19.25/hr (depending on experience) **Job Type & Location** This is a Contract to Hire position based out of Jacksonville, FL. **Pay and Benefits** The pay range for this position is $16.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Jacksonville,FL. **Application Deadline** This position is anticipated to close on Jan 28, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Our Mission : Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Purpose: Fabricate and refurbish wire rope slings and other lifting assemblies. Key Duties and Responsibilities: Fabricate and repair wire rope slings and assemblies; and Achieve qualification as an apprentice (minimum) or journeyman splicer. Driving company vehicles to complete pick-ups and deliveries as needed. Perform other functions as required. Job Requirements: Must have experience in manufacturing role working with various tools. Must be able to lift up to 70 pounds. Must be comfortable standing for extended periods of time. Must be authorized to work in the United States without sponsorship Must be at least 18 years of age Must be able to pass a pre-employment DOT drug test, DOT physical and background check (including MVR) Bishop Lifting Products, Inc. and it's subsidiaries are an Affirmative Action and Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Are you looking for an opportunity to become part of a rapidly-growing industry? Bishop Lifting Products, Inc. is looking for talent that will hold true to our mission while maintaining the safety and knowledge that we have valued since we were founded in 1984. Apply today! We're ready to help you start your new career path.

2nd Class IMP Fitter - 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports to: IMP Superintendent/IMP Foreman Supervisory Responsibility: None Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we've delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners' unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today's energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective To have experienced working knowledge of the Insulated Metal Panel installation, Assembly and the various terminologies, blueprint reading, measurements, take outs, job specifications, etc., to build an integrally complete erection system. Essential Functions Fluent in understanding job specification, blueprint reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems. The ability to cut, prep, fit and tack small to large; IMP's, Flashing, etc., from various material types through true-plumb-square; into weld ready status, using isometric and structural drawings, while adhering to specific fit tolerance requirements. The ability to properly select, measure, hand dress, and cut with grinder, power saws, hand tools, etc., as necessary to prepare IMP process to be completed per job specific requirements. Strong structural aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques. Safely and efficiently direct and monitor two or more helpers. Documentation of all quality reporting methods employed per SEA Quality Standards. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication Proficiency; Written and Verbal Ethical Conduct Problem Solving Organizational Skills Thoroughness Time Management Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 3:00 p.m. - 1:30AM Second shift days and hours of work are Monday through Thursday, 3:00 p.m. to 1:30 a.m. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required except for local travel during the business day. Required Education and Experience Basic math and language skills are required. Grinding, welding, brazing, rigging, and cutting sheet metal. 1 Year related experience or training Preferred Education and Experience 2 Years' experience in Insulated Metal Panels (IMP). Some vocational technical training is desired. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

The Rebar Fabricator at Colony Hardware is responsible for assisting in the fabrication of steel reinforcement bar (rebar) through the use of a rebar shear line machine and bending machine. You will handle, cut, bend, and stage the material for customer pickups or delivery to jobsites. A Little About Your Day: * Assist shear operator or operate the shear line * Feed the line with rebar bundle; Break open bundles * Loads truck with packed orders in an organized and specified sequence * Assist rebar bender; Feed rebar bender with rebar cut from the shear line * Moves completed orders to appropriate shipment locations * Ensures that the work environment is kept orderly, organized, and clean during production and at the end of the shift * Communicate issues to supervisor for resolution * Other duties as assigned This Might Be the Opportunity for You If: * It is important to you to have a career where there is a large degree of predictability from one day to the next. * You love being on your feet and working in an open, outside space. * Paying attention to the details is engrained in who you are. Doing it right is as important as doing it with a sense of urgency. * You naturally gravitate towards working independently, but your approachable yet professional nature allows for communication to be one of your top qualities. What You'll Need for Success: * High school degree or equivalent required. * Minimum of 1-3 years' experience working with steel, rebar, or similar materials, or working in a warehouse or open yard environment. * Ability to safely lift and manage 50+ lbs. * Basic computer skills. We Can Offer You: Colony Hardware provides a performance-based culture where all employees are rewarded for the achievement of both personal and company goals. This includes: * Competitive salary and annual discretionary bonuses potential. * Multiple medical, dental, and vision plan options. * Short Term Disability, Long Term Disability, and Life Insurance. * 401k retirement plans with a company match. * Tuition reimbursement. * Competitive sick, vacation and PTO time as well as paid holidays. * Company-provided PPE as required. * Company-paid training and certifications. * Generous discounts on the best products from leading industry vendor. Life at Colony With over 60 locations and 1,100 employees, Colony Hardware is the leading distributor of Tools, Equipment, Fasteners, Supplies, and Safety Products to commercial construction and industrial accounts throughout our markets. At Colony, our people are our most valuable asset. Success as a Colony Associate means being reliable, conscientious, and passionate. With our direction centered on teamwork, every employee at Colony will not only find their work to be meaningful, but will have the opportunity to grow alongside Colony, both professionally and personally. If you possess a will to win and would like to join a culture where integrity and collaboration are integral to success, apply to Colony Hardware today to join our growing family! Colony's Commitment to Equal Opportunity Colony Hardware Corporation is an equal opportunity employer. We enthusiastically accept our responsibility to make employment decisions without regard to race, religious creed, color, age, sex, sexual orientation, national origin, citizenship, religion, marital status, victim of domestic violence, familial status, genetic predisposition or information, disability, Family and Medical Leave, military or veteran status, citizenship, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

A position at White Cap isn't your ordinary job. You'll work in an exciting and diverse environment, meet interesting people, and have a variety of career opportunities. The White Cap family is committed to Building Trust on Every Job. We do this by being deeply knowledgeable, fully capable, and always dependable, and our associates are the driving force behind this commitment. White Cap is hiring immediately for a **Fabricator** ! Do you want a part in helping to _Build America?_ As the leading North American distributor for professional contractors, the White Cap family of brands supplies of our nation's largest construction projects, including stadiums, roads, bridges, highways, residential housing and more. We are hiring immediately for a **Fabricator!** _Why a_ **_career_** _with White Cap?_ + **Comprehensive wellness and financial benefits:** White Cap offers excellent benefits, including Medical, Dental, Vision, 401(k) with company match, tuition reimbursement, and more! + **Relax and recharge:** We offer a generous time off package, including paid maternity, parental leave, sick time, and vacation time. + **Stability:** Since 2020, White Cap has doubled in size and continues to grow. + **Unlimited career potential:** White Cap is a stable and growing company offering unlimited career potential. + **Love where you work:** White Cap has been certified as a _Great Place to Work_ . + **Inclusive culture:** Work in a place that values and celebrates who you are. _A_ **_Fabricator_** _at White Cap..._ + Examines specifications of the customer's order using drawings, work orders, or blueprints to determine the characteristics of the finished item, materials to be used, and machine setup requirements. + Fabricates work pieces as determined by work order specifications. + Retrieves correct materials and performs various fabrication duties. + Examine work pieces visually, by touch, or by using a tape rule, calipers, or gauges to ensure product meets desired standards. + Package items for shipping. Installs protective devices, to ensure shipped materials do not shift or become damaged during transport. + Follows company safety policy and procedures. + Performs other duties as assigned. + Generally has 0-2 years of experience. **Preferred Qualifications** + Experience with reading blueprints, work orders or analyzing drawings. + Knowledge of construction and industrial products. + Spanish language proficiency. If you're looking to play a role in building America, consider one of our open opportunities. We can't wait to meet you. **Functional Area** Field Operations **Work Type** On-Site **Recruiter** Arriaga, Melissa **Req ID** WCJR-029676 White Cap is an Equal Opportunity Minority/Female/Individuals with Disabilities/Protected Veteran and Affirmative Action Employer. White Cap considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender, gender identity, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law.

Job Description Our client is looking for First Class Welders to work at their Jacksonville facility. This is a full-time temp to hire position. Hours: Days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Summary/Objective Capable of performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes Essential Functions Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certified testing criteria. Analyze blueprints for welding insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measure, hand dress, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper, and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Strong mechanical aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication proficiency written and verbal Ethical Conduct. Problem Solving Organizational Skills Thoroughness Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Required Education and Experience Basic math and language skills required. Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. Related experience or training. Preferred Education and Experience 6+ Years' experience in Welding SMAW, FCAW and GTAW, or a combination. 2 years vocational technical training. Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean back-ground check and random drug screening consent. Job Type: Full-time Pay: $22.00 - $28.00 per hour Shift: 8-hour shift Day shift Application Question(s): Are you willing to take a drug test? Do you have a clean background, and can we run a background check? Experience: Precision measuring instruments: 6 years (Required) ISO 9001: 3 years (Required) TIG welding: 6 years (Required) Stick welding: 6 years (Required) License/Certification: Driver's License (Required) Ability to Relocate: Jacksonville, FL: Relocate before starting work (Required) Work Location: In person

Night Shift starting at $19.82!48-Hour Work WeekMonday- Thursday 4:30 pm - 4:30 am Overtime available Double Time After 50 hrs. Worked!*Train on 1st Shift (5am-4:30pm) At Veritas Steel, were leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! Welders employed at Veritas Steel's Palatka location are responsible for performing FCAW & SMAW processes to codes, and standards, including repairs and miscellaneous tasks as assigned by Shop Supervisor. They must be able to meet high production demands in a timely manner and complete high-quality work with expertise. Welders must also adhere to company policies to ensure a safe working environment. Principle Duties and Responsibilities: Uses proper safety equipment to ensure surfaces are adequately prepared for all operations:Air arc, Grove Welds, Flex Core, Full PinUsing correct procedures to obtain proper weld profile, etc.,Understands general knowledge of welding codes and welding tools Proper preparation, cleaning, and setup Hand torch setup and use Understand basic weld symbols/gauges Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety Coordinates with shop supervisor and other personnel for the purpose of completing projects/work orders efficiently, on time, and with no defects Adheres to safety policies to ensure a safe working environment for oneself and surrounding coworkers Knowledge, Skills, & Abilities:High School diploma or GEDMust be able to read, write, and comprehend EnglishNeed to be able to read metric tapes Able to adapt to work priorities, communicate well, meet deadlines and schedules, and work as part of a team Commitment to work safety and actively participating in our safety culture Commitment to attendance policy and procedures Quality, accuracy, thoroughness, and reliability of work performed Willingness to learn and contribute to the success of your team Welding experience is preferred but not required Physical Requirements:Able to lift 40 pounds and carry 30 pounds Must be able to push /move objects up to 50 pounds of force Pulling requirements up to 122 pounds of force Necessary to stand, walk, stoop, and kneel up to 99% of the shift Must have a good range of motion when reaching forward, shoulder to overhead, and bending Agile fingers and thumbs on both hands Working Conditions: Work is performed indoors in a large warehouse or outside in all weather conditions There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Compensation details: 18.72-22.16 Hourly Wage PIc63dd01558e1-31181-39493829

Job Description Venture Dynamics is seeking skilled and experienced Combo Welders to perform structural welding, fitting, and fabrication aboard Navy and commercial vessels. Combo Welders will execute SMAW and FCAW structural welds, fit and fabricate steel components, perform torch and plasma cutting, and support shipfitting tasks involving layout, fit-up, structural repair, and steel renewal. This role requires strong welding proficiency, blueprint interpretation, and the ability to work safely in shipboard and industrial marine environments. Per diem may be available on select projects depending on contract requirements and travel distance. Responsibilities Perform structural welding using SMAW and FCAW in all required positions Fit and fabricate structural components including bulkheads, foundations, frames, collars, brackets, and reinforcements Execute weld preparation including beveling, grinding, joint fit-up, and alignment to tolerance Read and interpret blueprints, sketches, weld symbols, and structural drawings Use oxy-fuel torches and plasma cutters for cutting, heating, beveling, and layout work Assist with insert installation, steel renewals, and major structural modifications Take measurements and verify alignment using squares, levels, tapes, plumb lines, and precision tools Operate grinders, cutting tools, clamps, dogs, wedges, and come-alongs Work in confined spaces, overheads, machinery spaces, and tight compartments aboard vessels Follow NAVSEA, OSHA Maritime, and shipyard safety requirements Maintain housekeeping standards, tool control, and safe welding practices Requirements Minimum 5 years of structural welding and fabrication experience in shipyard or industrial environments Proficiency in SMAW (stick) and FCAW (flux core) welding processes Ability to pass ABS, AWS, or customer-required weld tests Strong ability to read blueprints, structural drawings, and weld maps Skilled in fitting, layout, fabrication, and steel preparation Proficient with oxy-fuel torch cutting, plasma cutting, and hot-work tools Must supply and maintain a personal tool set appropriate for structural welding and fitting Ability to climb ladders, work at heights, navigate confined spaces, and work aboard vessels Ability to lift 4060 lbs and perform physically demanding welding and fitting tasks Must pass background check and drug screening Ability to obtain DBIDS/base access when required Reliable transportation and consistent attendance Ability to work overtime, nights, weekends, and variable shifts as needed Preferred Qualifications ABS or AWS structural welding certifications Experience welding aboard Navy vessels or to NAVSEA welding standards Experience with insert installation, steel renewal, and heavy fabrication work OSHA-10 Maritime Ability to wear a respirator when required for hot-work, confined-space, blasting, paint, or insulation areas Experience assisting multi-trade structural or rigging operations Additional Information Work occurs aboard ships, in dry docks, and in industrial fabrication environments PPE provided according to project and customer requirements Venture Dynamics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Job title: Structural Welder Reports to: Production Superintendent Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education High school graduate, or GED Responsibilities Ensure work is done safely and meets quality standards Set up welding machines based on the job at hand or using a Welding Procedure Specification Must have own basic skill related tools and equipment if not supplied by the workplace Weld steel, aluminum and stainless steel components based on the required weld processes and parameters Adhere to the specific welding procedure specifications Set up welding cells for serial production runs Keep work areas clean and organized and take proper care of all equipment and facilities Follow all company rules and policies Provide a great level of attention to detail and focus on the given task Follow all safety rules and quality standards Work with team members to maximize productivity and efficiency Assist in the preparation of product for shipment Report any unsafe work conditions or practice to supervisor Must be able to lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds) or using a hoist 3. Qualifications Six months to one-year related experience and/or training Experience with steel, aluminum and/or stainless steel required Experience with SMAW, GTAW and GMAW welding highly preferred Ability to follow instructions given both verbally and in written form Willingness to learn and work to the best of his/her abilities and have a dependable work ethic Knowledge of welding equipment and associated tooling including proper set up and use Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals Familiarity with the metric system Ability to stand continuously for long periods of time Willing to work 40+ hours a week Pass substance abuse testing Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.

Canam Steel Corporation is a major US manufacturer of open web steel joists and steel deck. The company participates in thousands of projects each year ranging from large distribution centers and high rise projects, to small retail centers. We are looking for self-motivated and safety conscious candidates. Job Description Performs welding operations and related tasks such as gathering required parts, setting up materials for welding and welding joist products. Career Summary Performs production welding in a fast paced environment. Read and interpret weld symbols on shop drawings and blueprints. Ensures that all welds are complete and of good quality; repair bad welds as necessary. Maintains a positive, clean and orderly work environment. Performs daily cleaning and maintenance of area. Works in a safe and productive manner. Performs other job-related duties as assigned by supervisor including but not limited to; cleaning, steel scrap removal, and other production related jobs. Qualifications High School diploma or general education degree (GED). One to three years of experience and/or training, or equivalent combination of education and experience. Ability to apply common sense understanding to carry out written and oral instructions. Ability to pass any standard, recognized welding observation. Additional Information All your information will be kept confidential according to EEO guidelines.

Summary: Trailer Bridge is looking for an energetic and self-motivated Welder to join and support our maintenance team. The Welder will be responsible for performing preventive maintenance, joining metal parts and fabricating component using various welding techniques. This includes conducting major and minor repairs on trailers, chassis and containers in accordance with established maintenance and safety standards. Candidates will be required to pass an onsite weld test as part of the hiring process. Our Welders will ensure high-quality welds that meet industry standards and project specifications. Key Responsibilities: Read and interpret blueprints, drawings and specifications to determine the appropriate welding processes and techniques. Set up welding equipment and perform welding operations on various materials, including steel, aluminum, and other metals. Inspect and test welds for quality, ensuring compliance with safety standards and project requirements Maintain welding equipment and tools, ensuring they are in good working condition. Collaborate with team members and other departments to meet production schedules and projects deadlines. Follow all safety protocols and regulations to ensure a safe working environment Document work completed and report any issues or discrepancies to supervisors Completes repair orders and attendance records legibly and in a timely manner Responsible for shop cleanliness and safety and compliance Maintains proficiency on equipment and technologies to enhance quality of work and productivity Available to work a variety of shifts, including days, evenings, nights, and weekends Additional duties and projects as assigned by supervisor Qualifications: High School Diploma or equivalency; vocational training in welding is a plus 3-4 years of container/chassis/trailer repair experience preferred Proven experience as a welder in a manufacturing or construction environment Proficient in MIG, TIG and arc welding techniques Ability to read and understand technical documents and blueprints Strong attentions to detail and commitment to quality workmanship Excellent problem-solving skills and ability to work independently or as part of a team Valid welding certification is preferred Ability to perform strenuous physical activity including, but not limited to, lifting up to 100 lb., bending, kneeling, reaching, climbing, and working in awkward positions for extended periods of time Must provide own hand and air tools CDL and ASE certifications desired but not required Supports the culture of Trailer Bridge by modeling the TB12 Core Values of a TB team member Benefits we currently offer: Medical, Dental & Vison Coverage Mental Health Coverage 401k, Life Insurance, Short- & Long-Term Disability Insurance Health Savings Account & Flexible Spending Account Generous PTO Plan & Paid Holidays Class Pass Credits Opportunity for internal career advancement Mentorship & Leadership Development Programs EEO/AA Institution. Protected veterans and individuals with disability encouraged to apply.

Wunderlich-Malec (WM) is 100% employee-owned and one of the largest and most well-established engineering companies in the United States. We have a Welder Structural Fabricator position available in our Baldwin, FL facility. This is a key role in our Baldwin, FL facility as a resource in producing the equipment as supplied with engineered systems. This position is responsible for modular building assembly, skidded control system fabrication, and general mechanical tasks. Major Responsibilities: Mechanical fabrication of modular control buildings from custom steel bases to wall/roof assembly, and full fit-out with doors, HVACs, etc. Proper layout of mechanical equipment within the modular building Assemble mechanical equipment per WM standards and engineered drawings Assembling, installing, and mounting electrical and mechanical equipment and components neatly and professionally within modular control buildings Ability to visually locate components and determine proper clearances, etc. Properly label and document component identification and location Assist with preparing assembled equipment for system testing procedures Maintain a clean and organized production area on a daily basis Reviews BOM (bill of materials) to assess equipment receipt and readiness for project assembly Proper use of industrial tools, such as welders, grinders, band saws, shear, punches, benders, overhead cranes, and forklifts Complies with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner Works with the Manufacturing Manager and Operations Manager to fully understand system assembly requirements and shipment schedules and/or project timelines Minimum Requirements: Education - High School Diploma (Associate degree in Industrial/Mechanical field and/or related Military experience preferred). Experience - 2+ years of directly related mechanical and/or fabrication experience in the areas described above for Staff Technician Level. 5 - 10 years of experience for Lead Technician Level Strong preference for AWS welding experience and certifications Strong preference for CWI certification Required Skills and Qualifications: Ability to read mechanical/fabrication drawings and details Good employee interpersonal communication skills Demonstrated skill in working effectively with a team of engineers and engineering support Familiar with the use of a personal computer (PC) for entering timesheets, expense reports, printing wire labels, etc. Working knowledge of all necessary safety requirements while working in the assembly area Strong time management and organization skills. Must be able to work independently and successfully complete multiple assignments in a deadline-driven environment Physical Demands of Position Good visual perception to see small electrical wires and components within the panel boards. Must have full dexterity in hands and fingers to utilize a variety of tools and equipment for electrical assembly. Must have the ability to stand and/or kneel for long periods. Ability to work extended hours to meet deadlines. Also, the ability to mount and dismount equipment, push, pull, and lift a minimum of 50 lbs. Working Conditions Equipment assembly environment; cement floor with floor padding provided as needed. There may be dust in the area from the type of equipment environment setting. On-site environment. *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance. Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits:Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Free uniforms Health insurance Vision insurance Rosenblad Design Group (RDG) a manufacturer of evaporation and crystallization systems, is seeking several Fabricators / Welders to join our production team. The individuals will participate in partial and full system and equipment fabrication. The ideal candidates will have a minimum of ASME welding experience 3 years experience as a combination GTAW and GMAW welder. Individuals must pass a pre-hire ASME Section 9 welder certification test. A GTAW tests will be a stainless pipe with a wall thickness of .343 welded in the 6G position. Primary Duties and Responsibilities: Willingness to cross-train and perform the work of other job tasks in addition to the primary assigned position. Operate forklifts, overhead crane, hand power tools, slings, grinders, plasma cutter, and other hand tools. Keeps equipment and work area clean and orderly. Perform both GTAW and GMAW welding on large stainless steel components to ASME section 9 code requirements. Ability to follow a Welding Procedure Specification (WPS) for TIG and MIG welding 304L, 316L, 2101 Duplex, 2205 Duplex and additional higher alloys. GTAW weld Stainless Steel in the thickness range of .036 to .500 inch. GMAW welding Stainless Steel in the thickness range of 5/8 up to 1 inch. Ability to read and follow shop drawings, sketches, production drawings, welding symbols. Comfortable welding at times above ground from a man lift. Insuring that all material surfaces to be welded are clean and free of dirt, oils, paint, slag and other contaminants. Inspect and correct welds as necessary to meet product specifications. Detect faulty operation of equipment or defective materials and notify supervisors. Monitor the fitting and welding processes to avoid warping, shrinking, distortion. PHYSICAL REQUIREMENTS: Standing Walking Pulling and Pushing Carrying Grasping Reaching Stooping and Crouching Welding Color Determination Near Acuity Occasional lifting 50 lbs. WORK ENVIRONMENT: This position requires work in a manufacturing environment facility and occasionally at field locations for installations. The employee is occasionally exposed to fumes or airborne particles. SAFETY: Perform all duties in a safe and efficient manner according to company and OSHA safety guidelines. Wear the proper personal protective equipment and use safe work habits. Rosenblad has a zero alcohol and drug tolerance policy. EDUCATION: High school diploma or GED plus three years related work experience with ASME section 9 code as a combination welder. Completion of formal welding apprenticeship program is highly desired. Previous work history and employer references will be required. Schedule: Full Time / First Shift: 6:00am to 2:30pm (M-F) position will be located at our facility in Yulee, FL. At times longer work hours and potentially some weekend overtime might be required to meet project deadlines. Compensation: To be determined based on applicants qualifications Job Type: Full-time Pay: $20.00 - $25.00 per hour Expected hours: 40 80 per week

Lays out, fits, and welds steel and aluminum components to assemble structural forms such as triangle frames, rectangle frames, pile frames, columns, struts, and other building parts by performing the following duties. Successful candidate will be subject to random drug screening per our Company DFWP policy, may be subject to a background check. Dependability for work schedule is crucial. ESSENTIAL DUTIES AND RESPONSIBILITIES FOR STEEL FITTER: * Direct and lead employees; * Read drawings; * Develops layout and tack parts; * Calculates figures such as angles and areas; * Interprets a variety of instructions in written, oral diagram or schedule form; * Operates small hand tools such as grinders, drills, and band saws; * Operates forklift; * Set up and operate fabricating machines such as punch, shear, notcher, torch or drill press; Positions, fits, and aligns tack parts; * Designs and fabricates templates; * Verifies product conformance using blueprints and other means; * Makes repairs to products by dismantling, reshaping and reassembling; and * Other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. #SE#

1st Class IMP Fitter 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports to: IMP Superintendent/IMP Foreman Supervisory Responsibility: None Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we've delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners' unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today's energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Summary Objective To have experienced working knowledge of the Insulated Metal Panel installation, Assembly and the various terminologies, blueprint reading, measurements, take outs, job specifications, etc., to build an integrally complete erection system. Essential Functions Fluent in understanding job specification, blueprint reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems. The ability to cut, prep, fit and tack small to large; IMP's, Flashing, etc., from various material types through true-plumb-square; into weld ready status, using isometric and structural drawings, while adhering to specific fit tolerance requirements. The ability to properly select, measure, hand dress, and cut with grinder, power saws, hand tools, etc., as necessary to prepare IMP process to be completed per job specific requirements. Strong structural aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques. Safely and efficiently direct and monitor two or more helpers. Documentation of all quality reporting methods employed per SEA Quality Standards. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication Proficiency; Written and Verbal Ethical Conduct Problem Solving Organizational Skills Thoroughness Time Management Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift days and hours of work are Monday through Thursday, 3:00 p.m. to 1:30 a.m. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required except for local travel during the business day. Required Education and Experience Basic math and language skills are required. Grinding, welding, brazing, rigging, and cutting sheet metal. 2 Years' related experience or training Preferred Education and Experience 3 Years' experience in Insulated Metal Panels (IMP). Some vocational technical training is desired. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

A position at White Cap isn't your ordinary job. You'll work in an exciting and diverse environment, meet interesting people, and have a variety of career opportunities. The White Cap family is committed to Building Trust on Every Job. We do this by being deeply knowledgeable, fully capable, and always dependable, and our associates are the driving force behind this commitment. White Cap is hiring immediately for a Fabricator! Do you want a part in helping to Build America? As the leading North American distributor for professional contractors, the White Cap family of brands supplies of our nation's largest construction projects, including stadiums, roads, bridges, highways, residential housing and more. We are hiring immediately for a Fabricator! Why a career with White Cap? Comprehensive wellness and financial benefits: White Cap offers excellent benefits, including Medical, Dental, Vision, 401(k) with company match, tuition reimbursement, and more! Relax and recharge: We offer a generous time off package, including paid maternity, parental leave, sick time, and vacation time. Stability: Since 2020, White Cap has doubled in size and continues to grow. Unlimited career potential: White Cap is a stable and growing company offering unlimited career potential. Love where you work: White Cap has been certified as a Great Place to Work . Inclusive culture: Work in a place that values and celebrates who you are. A Fabricator at White Cap… Examines specifications of the customer's order using drawings, work orders, or blueprints to determine the characteristics of the finished item, materials to be used, and machine setup requirements. Fabricates work pieces as determined by work order specifications. Retrieves correct materials and performs various fabrication duties. Examine work pieces visually, by touch, or by using a tape rule, calipers, or gauges to ensure product meets desired standards. Package items for shipping. Installs protective devices, to ensure shipped materials do not shift or become damaged during transport. Follows company safety policy and procedures. Performs other duties as assigned. Generally has 0-2 years of experience. Preferred Qualifications Experience with reading blueprints, work orders or analyzing drawings. Knowledge of construction and industrial products. Spanish language proficiency. If you're looking to play a role in building America, consider one of our open opportunities. We can't wait to meet you.

Our client is looking for First Class Welders to work at their Jacksonville facility. This is a full-time temp to hire position. Hours: Days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Summary/Objective Capable of performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes Essential Functions Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certified testing criteria. Analyze blueprints for welding insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measure, hand dress, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper, and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Strong mechanical aptitude and problem solver who can understand and follow instruction. Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations. Operate overhead cranes and or forklifts. Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards. Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review. Prepares for ISO 9001 and other audits. Competencies Collaboration Skills Reliable Attendance Decision Making Leadership Communication proficiency written and verbal Ethical Conduct. Problem Solving Organizational Skills Thoroughness Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. The employee is frequently required to stand, walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Required Education and Experience Basic math and language skills required. Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. Related experience or training. Preferred Education and Experience 6+ Years' experience in Welding SMAW, FCAW and GTAW, or a combination. 2 years vocational technical training. Additional Eligibility Qualifications Must have dependable transportation, valid driver's license, clean back-ground check and random drug screening consent. Job Type: Full-time Pay: $22.00 - $28.00 per hour Shift: 8-hour shift Day shift Application Question(s): Are you willing to take a drug test? Do you have a clean background, and can we run a background check? Experience: Precision measuring instruments: 6 years (Required) ISO 9001: 3 years (Required) TIG welding: 6 years (Required) Stick welding: 6 years (Required) License/Certification: Driver's License (Required) Ability to Relocate: Jacksonville, FL: Relocate before starting work (Required) Work Location: In person

**Job Title: Welder** **Pay:** $19-$22 per hour **Shift:** 1st Shift, 5:00 AM start **Overtime:** Plenty available We're looking for a reliable, skilled Welder to join our team on first shift. This role is ideal for someone who takes pride in high‑quality welds, works well independently, and is ready for consistent overtime opportunities. You'll be performing MIG and flux core welding on a variety of materials in a fast‑paced production environment. **️** **Key Responsibilities** + Perform MIG and flux core welding to company and industry standards + Read and interpret blueprints, drawings, and weld symbols + Inspect finished welds for quality and accuracy + Maintain a clean and safe work area + Work efficiently to meet production goals + Assist with additional fabrication tasks as needed **** **Requirements** + Previous MIG and flux core welding experience + Ability to pass a weld test + Strong attention to detail and commitment to quality + Ability to lift, bend, and stand for extended periods + Reliable attendance for a 5:00 AM start time + Willingness to work overtime as required **Job Type & Location** This is a Contract to Hire position based out of Jacksonville, FL. **Pay and Benefits** The pay range for this position is $18.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Jacksonville,FL. **Application Deadline** This position is anticipated to close on Jan 30, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We are seeking a **Welder Assembler** to join our team in constructing safe rooms. This role primarily involves **MIG welding** with occasional **TIG welding** , along with general shop tasks such as drywall installation, painting, and panel building. You'll work in a collaborative team environment and receive training to read and interpret drawings. **Responsibilities** + Construct safe rooms using MIG and TIG welding techniques. + Build wall panels and assist with drywall installation and painting. + Accurately measure and cut materials using hand and power tools. + Collaborate with a team of 4-6 members. + Read and interpret drawings (training provided). + Use a tape measure down to 1/16 of an inch for precise measurements. **Essential Skills** + Proficiency in MIG welding and ability to pass a weld test. + Experience in construction, assembly, fabrication, or shop settings. + Skilled in using hand and power tools. + Ability to read a tape measure and square accurately. **Additional Skills & Qualifications** + Experience with chop saws, bandsaws, and shears is a plus. + Ability to perform mechanical assembly and heavy lifting. **Join a stable team and grow your skills in a supportive environment!** **Job Type & Location** This is a Contract to Hire position based out of Jacksonville, FL. **Pay and Benefits** The pay range for this position is $17.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Jacksonville,FL. **Application Deadline** This position is anticipated to close on Jan 20, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.