Fabricator jobs in Lower Merion, PA

Job Description We're Hiring: Sheet Metal Fabricators (Entry-Level to Foreman) Location: Norristown, PA | Pay Range: $15-$40/hour | Full-Time At O'Donnell Metal Fabricators, we're more than a job shop-we're a small team of problem-solvers who take pride in precision, quality, and craftsmanship. With fewer than 20 employees, we run lean, fast, and focused. Everyone here counts, and no one's work goes unnoticed. We don't do red tape. We don't punch clocks. We build real things with real value-and we invest in people who want to grow. Position Summary: We're hiring Sheet Metal Fabricators and shop team members across five levels-from entry-level trainees to seasoned foremen. Whether you're new to the trade or have years under your belt, this is the place to build skills, take ownership, and do work that actually means something. We're not here for clock-punchers or corner-cutters. We want A-players who take pride in their craft and thrive in a team that moves fast and sets the bar high. Who We're Looking For: We're hiring across the following levels: Entry-Level Shop Helper / Trainee ($15-$20/hr) New to the trade. You're dependable, hands-on, and ready to learn. We'll teach you the tools and the trade-just bring the attitude. Level 1 - Apprentice ($21-$25/hr) Mechanically inclined and serious about a future in fabrication. You're learning layout, welding, and equipment under guidance. Level 2 - Intermediate ($26-$30/hr) 2-4 years of experience. You've run shop machinery, done layout and MIG welding, and you're building consistency and confidence. Level 3 - Junior Foreman ($31-$35/hr) 4-6 years of experience. You know the job inside and out and are starting to lead others while maintaining high-quality output. Level 4 - Foreman ($36-$40/hr) 7+ years in the trade. You lead by example, run jobs, train the team, and ensure the shop hits deadlines and quality benchmarks. What You'll Do (Based on Level): Operate brake presses, shears, layout tools, welders (TIG/MIG/Stick/Laser) Read and execute work orders, blueprints, and technical drawings Support and/or lead production jobs Train up or mentor down-depending on where you are Take ownership of quality, safety, and production flow What You Need: High school diploma or equivalent Valid driver's license A no-nonsense work ethic and attention to detail Ability to follow directions, think ahead, and improve continuously Fabrication experience (required for Levels 2-4; not required for Entry/Level 1) Compensation & Benefits: Competitive pay: $15-$40/hour depending on level and experience Paid Time Off (PTO) + Paid Holidays Health Insurance and Retirement Plan Full-time hours with consistent workflow Advancement opportunities at every level-from shop helper to foreman Working Conditions & Physical Demands: This position operates in a fabrication shop environment. While performing the duties of this job, the employee is regularly exposed to moving machinery, metalworking tools, airborne particles, heat, and noise associated with fabrication equipment. Proper PPE (personal protective equipment) is provided and required. Expect to: Stand, walk, and bend for extended periods Lift and handle materials up to 50 lbs Use hand/power tools and operate shop equipment Follow safety procedures and wear PPE at all times Step Up. Show Up. Stand Out. This is not the place to hide. It's the place to grow. If you're ready to bring your best, get better every day, and earn your spot through hard work-apply now. Join a team that respects skill, rewards effort, and builds things that last! O'Donnell Metal Fabricators is an equal opportunity employer. We believe skill, grit, and character matter more than background. If you're ready to contribute, we're ready to invest in you! Powered by ExactHire:187987

Come Join Us! From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape the way people live, work, heal, learn, and play. At OBE, the work of our employees truly matters. With over 6,500 employees, we operate more than 80 manufacturing and distribution facilities in five countries. You can see some of our favorite projects here. Start your journey with OBE and help us build the future. What You'll Get to Do The EP Fabrication Entry is focused on reading and interpreting blueprints and instructions, prep parts for assembly utilizing hand tools, punch press, and mills and reports to the Eric Corley and reports to the Production Manager. This role is perfect for an individual who is self motivated, pays attention to detail, and exhibit excellent attendance. A vital member of the Fabrication Department, this is an opportunity to build a career with an industry leader. Job responsibilities include: Basic spot welding to secure door components, operating a saw, Bridgeport, various other equipment. Package material in preparation for pick up or shipment Handle, package, and label architectural doors and frames. Read and interpret blueprints and instructions Prep parts for assembly utilizing hand tools, punch presses, and mills Installation of standard and custom hardware Participate in monthly inventory counts Maintain a clean and organized work area Assisting in a variety of other actions necessary to support production What We Are Looking For Perform work as assigned by supervisor Read, understand and communicate paperwork and labels. Attach appropriate labels and tags to product and packages. Ability to read and interpret basic mathematical measurements and effectively use a tape measure. Notify lead person or supervisor of any mechanical or material issues. Maintain a safe and clean work area, Must be able to stand and walk on concrete floor for eight or more hours. Must be able to wear company issued safety shirt, hard hat, steel toed shoes, safety glasses, and hearing protection. Must be able to work in a fast paced environment with minimal direct supervision, Must be able to read, understand and communicate paperwork and labels. What OBE Offers You Benefits that benefit you - industry competitive benefits at the lowest cost to the employee Work-life balance - PTO and holidays, including floating holidays you can choose Compensation that rewards your hard work - A pay-for-performance culture with potential for annual raises and bonuses Training - We will equip you with the knowledge and skills you need to succeed Pay starts at $20.00/hour OBE is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link. Oldcastle BuildingEnvelope is an E-Verify Employer.

**Immediately hiring a Metal Fabricator in Philadelphia, PA** We are seeking an experience Metal Fabricator with TIG and MIG welding abilities to support the production of high-quality custom metal components. This role works closely with engineering, design and shop teams to fabricate precise, visually detailed parts across a variety of metals and project types **This is a direct hire opportunity hiring immediately .** **What we offer:** + Competitive salary based on experience and skill level + Opportunities for Overtime and performance-based bonuses + Comprehensive benefits package (medical, dental, vison) **Shift/Pay: 5 Days a week** 6:30AM - 5:00PM@ Monday-Thursday Fridays/Weekends as needed. **Pay $25-35 depending on experience** **Job Description** As a Metal Fabricator, you will engage in TIG welding of nonferrous alloys such as brass and aluminum for furniture building. You will assist with manual machining and milling, perform set-up, and conduct production operations on a wide variety of projects, all while maintaining high standards for safety and quality. Understanding and utilizing personal protective equipment (PPE) is crucial in this role. **Responsibilities** + Perform TIG welding on nonferrous alloys for furniture building. + Assist with manual machining and milling. + Conduct set-up and production operations on diverse projects. + Maintain safety and quality standards. + Understand and utilize personal protective equipment. **Skills** + 5+ years' experience in a production environment. + Proven track record with hand tools, power tools, and typical shop equipment such as band saws, drill presses, and grinding/sanding machines. + 3-5 years of MIG & TIG welding on steel (16 gauge-quarter inch thickness). + Highly advanced in interpreting blueprints and drawings. + Consistent attention to detail, ensuring the highest quality of finished products and minimal rework. **Additional Skills & Qualifications** + Experience with furniture building, architectural elements, or mechanic work (or similar field) is required. **Why Work Here?** This role provides an opportunity to work with a competitive salary, and includes participation in the company's profit-sharing, 401K, medical, and dental programs. Employees benefit from a flexible schedule, paid time off, and a referral program, ensuring a well-rounded work-life balance. **Work Environment** The work environment includes a 4-day work week, Monday through Thursday, from 6:30 AM to 5:00 PM, with weekends as needed. The production environment involves the use of sheet metal fabrication, TIG and MIG welding, ensuring a dynamic and hands-on experience. **Job Type & Location** This is a Permanent position based out of Philadelphia, PA. **Pay and Benefits** The pay range for this position is $52000.00 - $72800.00/yr. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: - 401(k) - 401(k) matching - Dental insurance - Flexible schedule - Health insurance - Life insurance - Paid time off - Referral program - Vision insurance **Workplace Type** This is a fully onsite position in Philadelphia,PA. **Application Deadline** This position is anticipated to close on Dec 19, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We seek a skilled and motivated Fitter-Fabricator, ideally with 5+ years of experience in a custom metal fabrication environment. In this role, you can work on various projects, utilizing your expertise in welding and fabrication to create high-quality products. We want to hear from you if you're passionate about your craft and enjoy working in a collaborative environment! Responsibilities Strong fit-up and Forming is a priority for our next round of fabricators, who we would like to join our team. Perform welding and fabrication tasks using various techniques and materials. Ensure all work meets quality standards and adheres to safety regulations. Collaborate with team members to troubleshoot and resolve fabrication issues. Maintain a clean and organized workspace, ensuring tools and equipment are in good condition. Participate in ongoing training and development to enhance skills and knowledge. Qualifications Proven experience as a welder-fabricator in a similar role. Proficiency in CAD/CAM software for design and fabrication. Strong ability to read and interpret blueprints and technical drawings. Knowledge of various welding techniques and materials. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Strong commitment to safety and quality standards. You should be proficient in: CAD/CAM Software Blueprint Reading Salary info: $20 - $35 / hr

Job Description At Amuneal, each product we create is influenced by exploration, research, investment, and a never-ending focus on the highest quality materials, cutting-edge technologies, and skilled craftsmanship. With nearly 60 years of experience, Amuneal operates two divisions in Philadelphia, each with a focus on the highest quality products, fed by a strategy focused on diversification. Amuneal's Technical Products Division is the country's largest and most respected supplier of magnetic shielding, while our award-winning Custom Fabrication Division creates original designs for high-end residential and commercial interiors. Amuneal Manufacturing is seeking talented Metal Fabricators to join our fast-paced, dedicated, and extremely talented team. Candidates should have a strong working knowledge of drawings, schematics, and blueprints to work from to fabricate products and fixtures. They will be responsible for performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. This role will operate on a 4 day, 10 hour work week of 6:30AM-5:00PM Monday-Thursday. Responsibilities: TIG welding of nonferrous alloys: brass, aluminum, etc. for furniture building. Providing assistance with manual machining & milling. Performing set-up and production operations on projects of a wide variety, while maintaining standards for safety & quality. Understanding and using PPE Qualifications: 5+ years' experience in a production environment Proven track record with hand tools, power tools, and typical shop equipment (band saw, drill press, grinding/sanding machines, etc.) 3-5 years of MIG & TIG welding on steel required (16 gauge-quarter inch thicknes) Highly advanced in interpreting blueprints and drawings. Consistent attention to detail; ensuring highest quality of finished products and minimal rework. Experience with furniture building, architectural elements, or mechanic work (or similar field) required. Our work is custom in nature and highly evolving. As part of a team, you will work on a diverse set of challenging projects. Applicants should have experience and be able to thrive both in a collaborative setting and on solo tasks. This role offers a competitive salary in addition to inclusion in the company's profit sharing, 401K, medical, and dental programs. Benefits: 401(k) 401(k) matching Dental insurance Flexible schedule Health insurance Life insurance Paid time off Referral program Vision insurance Schedule: 4 Day Work Week (6:30AM-5:00PM M-Th) Weekends as needed Ability to commute/relocate: Philadelphia, PA 19124: Reliably commute or planning to relocate before starting work (Required)

Job Description This position will support our Production Department by fabricating components, tubing, and sheet metal used in the manufacture of specialty gas delivery systems. In addition to being able to read and understand drawings and job travelers, the applicant must also have experience with measuring and basic math, mechanical assembly, power tools, hand tools, and have good manual dexterity. The hours for this position are 7:00am to 3:30pm Monday-Friday. Responsibilities Include: Read project drawings, work orders, and procedures Layout, drill, tap, or punch holes in sheet metal enclosure units Cut stainless steel tubing to length using an automatic saw Face stainless steel tubing to length using a tube facing tool Position, align, and adjust components for proper fit & function Complete production paperwork and recordkeeping Maintain a clean, neat, and safe work area Follow company policy and production safety procedures Essential Skills: Quality/detail oriented with the ability to achieve repeatable results Strong mechanical aptitude Strong appreciation for time management, priorities, and deadlines Requirements: Must have good vision and dexterity Must be able to stand, bend, twist, and sit throughout the day for extended periods of time Be able to follow protocols and direction thoroughly and repetitively 1-2 years' experience in a production, assembly, or manufacturing environment Familiarity with the operation of common manufacturing tools and equipment Ability to lift 50 lbs. Applied Energy Systems is an equal opportunity/ affirmative action employer.

Welder (FCAW & GTAW) Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com . Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Holtec International offers a competitive benefits package to eligible associates, which includes: Medical, dental, and vision insurance 401(k) retirement plan with company match Paid time off and 11 Paid Holidays Company-paid life and AD&D insurance Employee Assistance Program Wellness resources and voluntary benefits Training and educational assistance Salary Range: $26 per hour to $37 per hour based on experience.

Job Description: Welder: Shift: 6 AM - 2:30 PM: Responsible for preparing and welding aftermarket custom exhaust components. Strong communication and math skills. Good interpersonal skills with the ability to communicate and interface positively with other team members and departments. Must be able to stand for the duration of the shift and able to lift up to 50lbs unassisted. Conduct quality workmanship, attention to detail and customers' satisfaction. Ability to read and comprehend blueprints. Practice safe work habits, follow safety guidelines, and support company safety initiatives. Perform daily organization and cleanup of work area. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Job Description Join Our Team: Shop Welder & Fabricator At Precision Hydraulics, we pride ourselves on being at the forefront of the waste equipment industry, offering top-notch retail and industrial equipment repair and maintenance services. We are currently looking for Welders and Fabricators to join our team to repair balers, compactors, and other industrial equipment at our Norristown, PA based shop. This role involves working on hydraulics, basic electrical operations, and welding fabrication to ensure safe and efficient site operations. **Minimum Requirements: ** 1. High School Diploma or G.E.D. 2. 1-2 years of experience in compaction maintenance and repair 3. Proficiency with basic and advanced hand tools 4. Ability to lift up to 50 pounds, climb ladders, and possess a mechanical background 5. Valid Fit-Test certification 6. Reliable transportation is required. **Essential Functions: ** -Conduct inspections, diagnostic tests, preventative maintenance, and repairs on various types of compactors and stationary equipment - Read electrical schematics and diagnose/repair electrical issues using single and three-phase AC voltage, including high-voltage electricity - Read hydraulic schematics and diagnose/repair hydraulic issues - Maintain knowledge of proper installation procedures for compactors and other stationary equipment - Perform or assist with installations, ensuring deadlines are met - Execute welding and fabrication tasks as needed - Accurately complete paperwork and enter data related to equipment repairs in a timely manner - Adhere to all safety policies and procedures - Perform other job-related duties as assigned **Company Culture: ** Our culture is described as customer service oriented, competitive, and growth oriented. Benefits include: Retirement Plan with Company matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Safety Incentive Program **Work Details: ** - Type of work: Other - Work Location: Fabrication Shop - Open to applicants without a college diploma - Remote work: No - Job Type: Full-time - Pay: $22.00 - $28.00 per hour

Join Our Team: Shop Welder & Fabricator At Precision Hydraulics, we pride ourselves on being at the forefront of the waste equipment industry, offering top-notch retail and industrial equipment repair and maintenance services. We are currently looking for Welders and Fabricators to join our team to repair balers, compactors, and other industrial equipment at our Norristown, PA based shop. This role involves working on hydraulics, basic electrical operations, and welding fabrication to ensure safe and efficient site operations. **Minimum Requirements: ** 1. High School Diploma or G.E.D. 2. 1-2 years of experience in compaction maintenance and repair 3. Proficiency with basic and advanced hand tools 4. Ability to lift up to 50 pounds, climb ladders, and possess a mechanical background 5. Valid Fit-Test certification 6. Reliable transportation is required. **Essential Functions: ** -Conduct inspections, diagnostic tests, preventative maintenance, and repairs on various types of compactors and stationary equipment - Read electrical schematics and diagnose/repair electrical issues using single and three-phase AC voltage, including high-voltage electricity - Read hydraulic schematics and diagnose/repair hydraulic issues - Maintain knowledge of proper installation procedures for compactors and other stationary equipment - Perform or assist with installations, ensuring deadlines are met - Execute welding and fabrication tasks as needed - Accurately complete paperwork and enter data related to equipment repairs in a timely manner - Adhere to all safety policies and procedures - Perform other job-related duties as assigned **Company Culture: ** Our culture is described as customer service oriented, competitive, and growth oriented. Benefits include: Retirement Plan with Company matching Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Safety Incentive Program **Work Details: ** - Type of work: Other - Work Location: Fabrication Shop - Open to applicants without a college diploma - Remote work: No - Job Type: Full-time - Pay: $22.00 - $28.00 per hour

Responsibilities/Knowledge include but are not limited to: Prepares component or area for welding. includes cleaning, layout, and setup. Welds using SMAW, GMAW, and GTAW. Welds can be inspected per VT and PT. Operates arc welding equipment, oxyfuel cutting torch or other cutting methods to ensure alignment or fit. Understand safety precautions associated with welding. Reads and interprets welding symbols from blueprints, specifications, and sketches. Sets up machines and equipment. Application Question(s): Are you a US Citizen? Are you able to obtain a Secret Security Clearance? Do you have experience with GMAW-P and GTAW welding processes with experience on materials such as Carbon steel, Stainless steel, Nickel-Copper, and Aluminum? How did you find this job posting? Example (BuildSubmarines.com, Indeed, NFPC Employee etc.) Experience: Welding: 3 years (Required)

Job Description Shop Welder | $25-$26/hr | Temp-to-Hire | Media, PA We're looking for a skilled Shop Welder to join a stable and supportive manufacturing team in Media, PA. This is a full-time, temp-to-hire position with consistent hours and long-term potential. ???? Schedule: Monday-Friday, 7:00 AM - 3:30 PM ???? Pay: $25-$26 per hour (based on experience) ???? Type: On-site | Temp-to-Hire What You'll Do Perform MIG and TIG welding on a variety of metal components Read and interpret blueprints and technical drawings Inspect welds for accuracy, strength, and quality Safely operate shop equipment and maintain a clean work environment What We're Looking For Proven MIG and TIG welding experience Ability to pass a hands-on welding test during the interview process Strong attention to detail and commitment to quality workmanship Reliability and a strong work ethic Physical Requirements Ability to stand for extended periods during shifts Capability to lift up to 50 pounds as needed Comfortable working with welding equipment, tools, and protective gear Ability to work in a shop environment with exposure to heat, noise, and metal materials Why Join Us? This role offers steady work, a supportive environment, and the opportunity to transition to a permanent position with a growing company. Apply today to be considered for this opportunity! Equal Employment Opportunity (EEO) Statement We are an Equal Opportunity Employer and value diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. IND123

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Perform layout work and all types of welding Work on large equipment and mobile equipment Assist in maintenance work Ensures compliance with all health, safety, and environmental regulations, and with company policies and procedures Must pass certification for 3G,4G What Are We Looking For High school diploma or GED required Minimum 2 years welding experience Must pass welding certification Able to use oxygen/acetylene torches Horizontal and Vertical, Overhead, and arc welding experience Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $29.49 per hour. Benefits through the Union for Medical, Dental, Vision, and Pension. Union paid vacation, sick leave, and holidays. Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Welding of light gauge steel starting from reviewing layouts, blueprints, diagrams, and work orders, to the final inspection of the work piece.

Job DescriptionSalary: Chant Engineering, based in the Doylestown, PA area, is a leading, diversified engineering company that designs, manufactures and services custom testing machines and aircraft hydraulic test stands for industrial and military customers worldwide. We manufacture standard machines as well as a lot of unique custom engineered testing equipment. We are currently seeking a full-time Mig Welder/Fabricator. In this role the MIG Welder/Fabricator must have with a minimum of 5 years experience. The MIG Welder/Fabricator will be responsible for welding and fabrication for our customized machinery. The qualified MIG Welder/Fabricator must have a current and valid drivers license and be able to pass a drug and background test. Join a motivated team in a dynamic engineering environment where there's never a dull moment! Visit our website at ************************ to learn more about what we do and be a part of our growing team! Responsibilities: Fabrication of machines and equipment. Operate machines and tools such as grinders, band saws, plasma cutters, mag drills, handheld drills, levels, squares, welders, etc. Repair/retrofit used equipment per engineering specifications. Perform various work from blueprints and drawings. Qualifications: High school diploma or equivalent. Fabrication experience is a must. Ability to read and work from blueprints and drawings. Knowledge of set-up and usage of MIG and TIG welders. Knowledge of measuring device usage. Knowledge of hand tools. Ability to work independently and as part of a team. Must be able to lift a minimum of 50 pounds without assistance. Ability to operate lift equipment. Must be able to communicate clearly in English, both verbally and in writing. Beneficial/preferred: Welding certification preferred, but not required Minimum 3-5 years of machine fabrication experience or equivalent combination of experience and education. Experience working with sheet metal. We offer a generous benefits package including: 15 days Paid Time Off. Additional one-week Paid Christmas break. Paid Holidays 100% Company paid Medical/Vision and Dental plan for our employees. Short-Term and Long-Term Disability and Life Insurance. Matching Simple IRA. Gym membership discount.

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications . · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys . · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off About the Role: Join United Plastics Machinery LLC as a Welder Fabricator and become an integral part of our innovative manufacturing team in Exton, PA. We are looking for skilled individuals who are passionate about precision welding and fabrication to help us deliver top-quality machinery solutions to our clients. Responsibilities: Perform welding on various materials including steel. Read and interpret blueprints and technical drawings to execute fabrication tasks accurately. Assemble and fit components according to specifications to ensure structural integrity. Conduct quality inspections on finished products to ensure adherence to industry standards. Maintain a clean and safe working environment by following safety protocols and regulations. Collaborate with team members to optimize production processes and improve efficiency. Utilize hand tools and welding equipment effectively to complete projects on time. Requirements: High school diploma or equivalent; vocational training in welding preferred. Minimum of 2 years of welding experience in a manufacturing environment. Proficient in welding techniques with a strong attention to detail. Ability to read and understand technical drawings and blueprints. Strong problem-solving skills and a proactive approach to work. Excellent communication and teamwork abilities. Willingness to comply with safety standards and regulations. About Us: United Plastics Machinery LLC has been a leader in the equipment manufacturing industry for over 50 years, known for our commitment to quality and innovation. Our customers appreciate our tailored solutions and exceptional service, while our employees enjoy a collaborative and supportive work environment that fosters growth and development.

Job Description We're Hiring: Sheet Metal Fabricator - Level 4 (Foreman) Location: Norristown, PA | Pay: $36-$40/hour | Full-Time At O'Donnell Metal Fabricators, we're more than a job shop-we're a small team of problem-solvers who take pride in precision, quality, and craftsmanship. With fewer than 20 employees, we run lean, fast, and focused. Everyone here counts, and no one's work goes unnoticed. We don't do red tape. We don't punch clocks. We build real things with real value-and we invest in people who want to grow. Position Summary: We're looking for a Level 4 Sheet Metal Fabricator (Foreman) who can take the lead on jobs, uphold shop standards, and coach the next generation of fabricators. This is a high-trust, high-impact role for someone who leads with both hands and heart. What You'll Do: Lead fabrication projects and manage priorities Oversee machinery use and ensure quality control Mentor and train team members Coordinate with internal teams to hit deadlines What You Need: 7+ years in a fabrication setting Advanced technical skills and welding proficiency Strong ability to lead others and manage priorities High school diploma or equivalent Valid driver's license Compensation & Benefits: $36-$40/hour based on experience Paid Time Off (PTO) and Paid Holidays Health Insurance and Retirement Benefits Influence over shop processes and team development Working Conditions & Physical Demands: This position operates in a fabrication shop environment. While performing the duties of this job, the employee is regularly exposed to moving machinery, metalworking tools, airborne particles, heat, and noise associated with fabrication equipment. Proper PPE (personal protective equipment) is provided and required. The role requires the ability to: Stand, bend, and walk for extended periods Lift and move materials weighing up to 50 lbs regularly Use hand and power tools with precision and control Read and interpret blueprints, technical drawings, and work instructions Work safely in a fast-paced, production-driven environment Occasionally work in awkward positions or confined spaces as needed Own the Outcome. Set the Standard. This is your floor. Your team. Your legacy. We're looking for someone who doesn't just weld parts together-but welds a crew into a high-functioning unit. If you've got the experience and the backbone to lead with pride and precision, apply now! We Respect Leadership That's Earned, Not Assigned O'Donnell Metal Fabricators is an equal opportunity employer. We back leaders who lead by example-regardless of background. If you know how to get results, build people up, and take ownership, you'll have a voice here. Powered by ExactHire:187991

This position will support our Production Department by fabricating components, tubing, and sheet metal used in the manufacture of specialty gas delivery systems. In addition to being able to read and understand drawings and job travelers, the applicant must also have experience with measuring and basic math, mechanical assembly, power tools, hand tools, and have good manual dexterity. The hours for this position are 7:00am to 3:30pm Monday-Friday. Responsibilities Include: Read project drawings, work orders, and procedures Layout, drill, tap, or punch holes in sheet metal enclosure units Cut stainless steel tubing to length using an automatic saw Face stainless steel tubing to length using a tube facing tool Position, align, and adjust components for proper fit & function Complete production paperwork and recordkeeping Maintain a clean, neat, and safe work area Follow company policy and production safety procedures Essential Skills: Quality/detail oriented with the ability to achieve repeatable results Strong mechanical aptitude Strong appreciation for time management, priorities, and deadlines Requirements: Must have good vision and dexterity Must be able to stand, bend, twist, and sit throughout the day for extended periods of time Be able to follow protocols and direction thoroughly and repetitively 1-2 years' experience in a production, assembly, or manufacturing environment Familiarity with the operation of common manufacturing tools and equipment Ability to lift 50 lbs. Applied Energy Systems is an equal opportunity/ affirmative action employer.