Fabricator jobs in Oregon

3575 25th St SE Salem Oregon 97302-1123 **_Why Valmont_** **We're Here to Move the World Forward.** Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a _Fortune_ 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. _We are the modern workforce_ . Are you ready to move the world forward? Apply now. Valmont is currently seeking a highly motivated and talented individual for a Fabricator and Machine Operator position at our Salem, Oregon site. We are looking for a highly driven individual that will process material in accordance with shop drawings using fabrication machines and tools. **Essential Functions:** + This position reports into (Supervisor title) and has (#) direct reports and (#) indirect reports + This role requires up to (%) travel (internationally/domestically), including overnight stays + Flexible schedule however must be able to work in the office xxx days per week + Set-up and run a variety of drill presses + Set-up and run hydraulic iron workers, sheer, punch, and cope + Use several different layout tools + Set up and run hydraulic Press Brake + Set-up and run CNC Turret punch + Maintain material traceability + Set-up and run VMC + Set up and operate a Hydraulic Press Brake + Perform general housekeeping **Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities):** + High School Diploma or GED equivalent + Minimum of 1 year experience working in a fast-paced manufacturing environment + Ability to lift, push or pull a maximum of 50 pounds + Must be able to read a tape measure to within 1/32" + Must be able to read shop drawings + Must be self-motivated and a fast learner + Demonstrated strengths in interpersonal skills, including the ability to adapt and professionally communicate with a variety of people **Highly Qualified Candidates Will Also Possess These Qualifications:** + Industrial trade school in industrial machining + One Year of previous qualified fabrication experience in a professional, manufacturing environment with press brake experience + Must be a person of passion and integrity who has the drive to excel and deliver exceptional results **Working Environment and Physical Efforts:** _Educational Background_ + Able to clearly communicate written and verbal instructions + Proficiency in addition, subtraction, multiplication, division, fractions, fraction to decimal conversions, and the use of micrometers, protractors, and tape measures + Ability to read specifications, bill of material, and simple and complex blueprints _Job Training Skill Development_ Must be able to satisfactorily perform all functions of this position within 90 days of starting this position. Must pass Valmont forklift certification for all forklifts used in the position. _Decision Making_ The decisions the person in this position makes affects inventory accuracy and availability of material for the production and shipping areas. The incumbent is responsible for prioritizing the workload to avoid lost time to all departments. Utilizes product mix in location assuring proper rotation of stored materials. Reviews space allocations and material flow to maximize utilization of space available. Able to apply creativity to solve the problems encountered within the scope of their activity. Examples would be to receive material, issue material, or resolve inventory discrepancies and implement the appropriate action to correct them. **Effort:** _Physical Effort_ Operates equipment 50% of the time. Lifts, pushes, and carries material _Mental and Visual Effort_ Coordination of eyes, hands and feet required to perform in an efficient and safe manner. Requires constant awareness. Must be able to accurately read and write part numbers and quantities on material, logs, move tags, and computer documents. Inventory logs and the computerized inventory system must be prepared and interpreted correctly. Due to the visual requirements of this position, employee must demonstrate acceptable vision by passing the eye test for an Oregon driver's license. If employee does not have a driver's license, the determination of acceptable vision will be made on an individual basis. **Benefits** Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: + Healthcare (medical, prescription drugs, dental and vision) + 401k retirement plan with company match + Paid time off + Employer paid life insurance + Employer paid short-term and long-term disability including maternity leave + Work Life Support + Tuition Reimbursement up to $5,250 per year + Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2025-10-20 Valmont is here to modernize vital infrastructure and increase agricultural productivity, sustainably and reliably. We galvanize steel to last a century with minimal environmental impact. We modernize irrigation to feed a growing population by utilizing the latest technology. We harden the electrical grid to enable the delivery of reliable power to millions of homes around the world. And we help make communities everywhere safer, cleaner and more connected through our smart infrastructure technology. Valmont serves two primary markets - agriculture and infrastructure - and seven diverse product lines: Utility, Lighting and Transportation, Telecom, Solar, Coatings, Irrigation and Ag Tech. We manufacture products in 85 facilities spread across six continents, and we do business in 100 different countries. That's what Valmont does. We conserve resources and improve life, finding ways to make innovation and technology beneficial in the real world. + That's the value we add.

Gaylord Industries; a division of ITW is seeking a seasoned Sheet Metal Fabricator to add to their team in Tualatin, OR. Schedule: Monday - Thursday 5:00am - 3:30pm ***Overtime on Fridays***Skills/Ability: Skills to perform high quality Tig welding, grinding and finishing skills. This will include: fillet welding with uniform width and depth, and grinding and striping no wider than 3/8” with all burn marks blended out and no marks showing. Skills to fuse weld a 90 degree joint, keeping weld surface flat, width even, with exterior edge sharp and no rollover. Working knowledge of the following tools: drill motors, cutoff saws, Grinders, drill press, Tapping tools, belt sanders and various hand tools. Proficiently read and use a tape measure. Read and understand English in order to read/interpret prints, diagrams and drawings. Proficient math skills. Must be a team player, including good interpersonal skills Experience: 1+ years Tig welding experience 1+ years grinding/polishing experience Essential Functions/Responsibilities: Tig fillet weld and finish stainless steel equipment and components with uniform width and depth. Ensure high quality standards are achieved and maintained. Analyzes plans, drawings, work samples, specifications, and work orders to determine work requirements and sequence of welding assignments. Follow all safety and housekeeping rules. Actively participate in Safety Program Cross train into other areas and job functions as needed. Willing to assist in other areas as needed. Welding is 20% of the assembly process. Installation of screws/nuts/bolts/rivets/silicone and more. Education: High School Diploma or GED. Minimum age requirement is 18 years. Successful completion of an internal welding demonstration test Physical Requirements: The ability to lift, carry, push, or pull objects of 75 lbs or more. The ability to endure prolonged physical activity to work in demanding environments. The ability to bend, squat, reach, and turn in various directions. The ability to manipulate objects with precision and speed. Vision, hearing, and other sensory abilities are needed for specific tasks. The ability to safely climb and work from ladders, work on scaffolding, or perform other tasks at elevated heights. Compensation Information: Pay: $22.00 - $26.00 hourly DOE ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Job Type: Full-time Salary: $20.00 - $25.00 per hour / time and a half when travelling. Benefits: Dental insurance Health insurance Paid time off Retirement plan Shift: 8 hour shift / 10 hour shift on-site Weekly day range: Monday to Friday Job Description Alongside the install team travel either domestically or internationally or both to customer sites to install, move, uninstall or modify heavy equipment. Must be able to travel 4 12 times per year. When not travelling on installation jobs helping with the fabrication of heavy equipment. Read and interpret Drawings and work orders Fabricate / weld stainless steel components with attention to detail Must be able to safely operate the following production machinery: Shear Metal Saw Press Brake Overhead Crane Fork lift 10,000 pounds or more Scissor lift Ability to safely operate the following production machinery a plus: Hydraulic Punch Plasma Table Experience with a Bridgeport milling machine a plus Non job specific duties as assigned Experience installing industrial equipment a plus Education: High school or equivalent (Preferred) Experience: Fabrication: 2 years (Preferred) Required skills and other requirements: Welding Wiring light Caulking Team player Fast learner Up and down ladders Work hard physically in many locations Must have or be willing to get a passport for international jobs

Your next opportunity is here - Urgently hiring Welder Fabricators in Eugene, Oregon! Job Title: Welder Fabricator Pay: $21.00 - $28.00 per hour, DOE Hours: Monday - Friday, 3:30PM - 12:00AM As a Welder Fabricator, you'll perform MIG, Fluxcore, and light TIG welding, operate fabrication equipment, and prepare metal components for assembly. You'll work with a wide range of metal products due to the company's diverse contract manufacturing projects. What You'll Do As a Welder Fabricator, you will be responsible for: Performing MIG/Hardwire welding and Fluxcore welding Completing occasional TIG welding as needed Grinding and deburring metal parts using handheld grinders and palm grinders Operating shop machinery including drill presses and press brakes Removing parts from laser cutting machines and burn tables Tack and spot welding components as required Reading tape measures and interpreting basic fabrication instructions Maintaining cleanliness of work areas and equipment Supporting production goals with consistent, high-quality work What You'll Bring The ideal candidate for this role will have: Prior welding experience (required) MIG and Fluxcore welding experience; TIG experience preferred Ability to read and interpret blueprints Ability to lift up to 30 lbs and perform physical shop tasks Strong attention to detail and workmanship Reliability, consistent attendance, and a strong work ethic Why Join Us in Eugene? Competitive pay starting at $21-$28/hr DOE Temp-to-hire opportunity with wage reviews after hire and during probation High-variety fabrication environment - no repetitive, identical jobs Supportive team and access to modern equipment Ask us about our Referral Bonus Program for earning extra cash! Enjoy affordable health and prescription coverage once hired permanently. Location & Schedule This position is on-site in Eugene, Oregon, with a full-time schedule of: Monday-Friday, 3:30PM-12:00AM Ready to Take the Next Step? If you're ready to grow your career as a Welder Fabricator in Eugene, apply today. Don't wait - we're hiring now! #STEUG

Full-time Description The Experienced Drift Boat Welder is responsible for the precision welding, fabrication, and assembly of high-quality aluminum drift boats and components. This role requires advanced aluminum MIG and TIG welding skills, strong attention to detail, and the ability to interpret drawings and specifications to produce industry-leading products. The welder will work closely with production teams to ensure all boats meet Pavati's rigorous quality, safety, and performance standards. DUTIES & RESPONSIBILITIES: Set up and operate aluminum MIG and TIG welding equipment. Review prints, drawings, and provided parts to verify specifications and accuracy for each job. Weld, cut, and grind aluminum of varying widths to meet structural and cosmetic requirements. Inspect completed welds and components to ensure they meet company quality standards. Maintain a clean, organized, and safe welding booth and work environment. Collaborate with team members and supervisors to meet production schedules and quality expectations. Follow established fabrication processes while contributing to continuous improvement in welding and manufacturing operations. Uphold Pavati's high craftsmanship standards in building world-class aluminum drift boats. Requirements QUALIFICATIONS: Aluminum welding experience required (MIG & TIG) minimum of 5 years. Welding certification is a plus but not required. Ability to read and interpret blueprints, drawings, and measurements. Strong attention to detail, craftsmanship, and work ethic. Ability to work efficiently in a fast-paced production environment. Commitment to safety and adherence to established fabrication procedures. Salary Description Starting at $33 / hour

Madden Industrial Craftsmen is seeking a Welder/Fabricator for a long-term role with a shop located in SE Portland. The person in this position will primarily weld and fabricate industrial machinery framing using MIG welding processes. PAY: $25-$30/hr Welder/Fabricator Responsibilities: * Weld with fluxcore and hardwire MIG on carbon steel and mild steel. * Some TIG welding on stainless steel. * Set-up and keep alignment of equipment. * Read blueprints and fabricate utilizing relevant shop equipment. * Assist mechanics with assembly as needed. Welder/Fabricator Qualifications: * 5+ years of MIG welding experience. * 5+ years of experience fabricating from prints. * Must be proficient in welding symbols. * Willingness to assist mechanics with assembly processes as required. * Ability to work day shift (MON-FRI, 7AM-3:30PM) * Ability to pass a pre-employment background check and drug screen (THC friendly). Welder/Fabricator Benefits: * $25-$30/hr * Medical * Paid Sick Leave * Paid Holidays * 401(k) with match

Job Description Legacy Talent Search is currently seeking candidates for Entry-Level Welder roles in Forest Grove, OR. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest-quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Perform basic welding tasks, including MIG, TIG, or stick welding, under the guidance of experienced team members. · Set up, operate, and maintain welding equipment to support daily production activities. · Read and interpret basic blueprints, weld symbols, and work instructions to complete assigned projects. · Inspect welded joints and fabricated parts to ensure proper alignment, strength, and quality standards. · Prepare materials for welding, including cutting, grinding, and fitting components. · Maintain a clean, safe, and organized work environment in accordance with company safety protocols. · Load and unload materials, ensuring proper handling and accurate inventory tracking. · Collaborate with team members to meet production goals and resolve fabrication challenges. · Accurately document work performed, materials used, and welding parameters as required. · Promptly report any equipment malfunctions, material issues, or safety hazards to supervisors. Qualifications: · High school diploma or equivalent; welding coursework, technical school training, or prior shop experience is preferred but not required. · Ability to lift up to 50 lbs and stand for extended periods in a fast-paced shop environment. · Strong mechanical aptitude and eagerness to build welding and fabrication skills. · Excellent attention to detail and a commitment to producing high-quality welds. · Effective teamwork and communication skills. · Flexibility to work varying shifts, including evenings and weekends, as needed. · Basic knowledge of welding processes and safety practices is a plus; training will be provided. What We Offer: · Competitive hourly wage. $21-$23 DOE. · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for growth and advancement, including continued welding training and certification support. · A supportive, inclusive workplace culture. · The chance to contribute to a company that values craftsmanship, safety, and continuous improvement. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

At Astec-Franklin Blvd, formerly known as Johnson Crushers International (JCI), our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! $1500.00 Sign-On Bonus and Day or Swing shift. Swing has a $2.00 shift differential. What You'll Do: * Cut and prepare surfaces or components * Lay out, position, fit, tack, weld, and finish a variety of parts or products following established methods and specifications * Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures * Weld in flat, horizontal, vertical, or overhead positions * Other job duties as assigned Why You'll Love Working for Us: * Health, Dental, Vision- Day 1 Eligibility * Life, and Spousal Insurance * Health Savings and Flexible Spending Accounts * Short-Term and Long-Term Disability * 401(k) with Company Match * PTO * Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: * High school diploma or GED preferred * Forklift, overhead crane, and rigging experience required * Must pass weld test * Ability to read, analyze, and interpret detailed drawings ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

JCI welder/fabricators have a knack for safety, quality and team work. If these sound like characteristics that describe you, JCI is where you should be! At JCI, we take pride in developing talent. If you're new to welding/fabrication and want to expand your skillset, this is the place for you! OR- if you're an experienced welder, bored with seeing the same plans all the time, we can offer variety! Our welders start at $20-$25/hr depending on experience and the scale currently goes to $30.81- so if opportunity is what you want, that is what you will get at JCI! As a welder/fabricator you will: Cut and prepare surfaces or components, lay out, position, fit, tack, weld, and finish a variety of parts or products following prescribed methods and specifications Handle and position heavy components using an overhead crane, clamps, jigs, and fixtures. Weld in flat, horizontal, vertical or overhead positions. Other duties as assigned Successful candidates should have a High school diploma. Must be able to pass JCI weld test. Must be able to read, analyze and interpret detail drawings. Experience in forklift, overhead crane and rigging is required. At JCI, we take pride in developing talent. If you want to expand your skillset, this is the place for you! EOE/M/F/Vets/Individuals with Disabilities.

Responsible for various types of weld preparation, GTAW welding and weld finishing operations to manufacture product to customer drawings, specifications, or other forms of instruction. Self-motivated people who want to make a difference should apply. Thin metal welding (less than . 060”) is a plus

Max Manufacturing, one of Central Oregon's most skilled fab shops, is searching for an experienced structural steel fabricator. This position involves multiple types of metal fabrication, from heavy structural steel to light gauge cosmetic, you will see it all. Essential Duties & Responsibilities Knowledge and use of handheld fabrication equipment Ability to operate forklift routinely in a safe manner Well versed in general fabrication techniques Ability to read and understand shop drawings, blueprints and sketches as required to produce projects Must have physical strength and manual dexterity, including hand/eye coordination, to manage all materials and tasks as required per job 5+ years of experience Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. The employee is occasionally required to stand; walk; sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Benefits Max Manufacturing benefit offerings cover medical, dental, vision, a Flexible Spending Account (FSA), Health Reimbursement Account (HRA), One Pass, life insurance, mental health wellbeing, medical transportation, supplemental insurance for tough situations life throws at you, a generous 401k plan, and accrued paid time off (PTO). Employment Eligibility & Relationship Disclaimer Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship.

We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Tangent, OR facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon. 2. Operate air arc to remove steel (back gouging). 3. Grind with 90° angle grinder. 5. Read weld symbols and check weld size using weld fillet gauges. 6. Heat material to required temperature using temperature sticks and heating torch/cutting torch. (read and follow pre-heart & interpass temperature tables.) 7. Set machines according to procedure charts. 8. Use air chipper to chip of slag. 9. Use natural gas propane heaters to pre-heat steel. 10. Operate stud welder. 11. Follow weld procedures as it applies to volts, amps & wire feed speed. 12. Heat, straighten and be able to know when to use pre-heat to offset distortion. 14. Perform other duties as required by management. Shift Times: Day (M-F): 6:00am-4:30pm Swing Shift: 4:30pm-3:00am Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

Job Description NEW SHOP in PNW!! WE ARE HIRING Fabricators & Welders!! About us: Oregon Mining & Ag Fabrication is a new shop in the Pacific Northwest entering into the fabrication industry. Specializing in design-build projects, build-from-print manufacturing, and expert repair work, we're positioning ourselves to become the region's premier fabrication shop. Our ambitious team is driven by a commitment to hard work, uncompromising quality, and ethical business practices. As we embark on a trajectory of strong growth, we're offering exceptional opportunities for skilled professionals to advance their careers and make a significant impact in our industry. The Opportunity: Fabricator & Welder We're seeking seasoned fabricators and welders to join our team and contribute to our vision of excellence. The ideal candidate will bring a wealth of experience, a passion for craftsmanship, and a drive to excel in a dynamic work environment. *Experience with exotic alloy fabrication is a plus, as is the ability to adapt to a diverse range of projects and challenges* What we're looking for: The successful candidate will possess a minimum of at least 3-5 years of experience in the metal fabrication industry. You should be adept at reading and working from prints, capable of working autonomously, and committed to maintaining the highest standards of quality in your work. Your technical skills should include proficiency in all-position welding, including multi-pass heavy welding. You should be competent in fitting, understanding the correct order of operations, and comfortable with using torches and air arcs. We value creativity in fit-ups and the ability to tackle unorthodox work. About you: We're looking for individuals who take pride in their work, demonstrate a strong work ethic, and contribute positively to our team atmosphere. You should be open to constructive feedback and committed to punctuality and regular attendance. A dedication to safety and proper equipment care is essential. Job Details: Jobsite is located at: 10590 Donald Rd., NE, Donald, OR 97020 (Bldg.#2) Working Hours: Mondays-Fridays from 7:00am-3:00PM Compensation is dependent on experience Qualifications: Must have reliable transportation Submit to background /drug screenings and pre-employment screenings Benefits: Medical/Vision/Dental (monthly premiums paid by employer after waiting period) Vacation & OSL Generous 401k employer match Joining Oregon Mining & Ag Fabrication means becoming part of a forward-thinking team at the ground floor of an exciting venture. If you're excited by the prospect of shaping the future of fabrication in the Pacific Northwest, we invite you to apply. You'll have the opportunity to work on a wide variety of projects, each presenting unique challenges and learning opportunities. As we grow, so too will the potential for your career advancement. We are an equal opportunity employer. We look forward to hearing from you and potentially welcoming you to our team. Job Type: Full-time Shift: Day shift Work Location: In person

Offshore Maintenance Group Transocean is focused on being the employer of choice for the drilling industry. We are challenging ourselves every day to push the performance of the company through technological advances and passion for our work. Job Summary Carry out welding, cutting, burning and associated activities as directed on board the vessel Job Description REPORTING: 1st Assistant Engineer, Mechanical Supervisor, Maintenance Supervisor SUPERVISION: None PRE-REQUISITE/QUALIFICATION: High School Diploma (U.S.)/ Proof of Completion of Formal Education or Relevant Craft Certificate (where applicable) Successful Military Discharge - Preferred for U.S. Graduate of Trade School or University where knowledge and training acquired are applicable to job requirements - Preferred Valid medical examination and vaccination certificates Norway Specific: Must hold qualifications in accordance with relevant authority requirements and the requirements of the Havtil ref. Activities Regulations and Welder coding according to NS-EN ISO 9606-1:2013. GENERAL REQUIREMENTS: Promotes a Safe and Respectful Work Environment: Proactively promotes and Maintains a healthy respect for open and transparent dialogue between all levels of personnel. Demonstrates care for the safety and well-being of all personnel, at all times. Invests in each person to provide equal opportunity for development and advancement of those qualified, to fulfill their career objectives. Respects the dignity of all personnel and recognizes their merit. Attend and participate in all required Safety and Operational meetings. Participate fully in the annual performance appraisal process, competency assessments based on performance against Operational Discipline requirements. Complete company training requirements for the Welder job level as per the training matrix, including in local/regulatory requirements. If applicable, the duties and responsibilities in the safety case for this position must be observed. Full participation in emergency drills and respond to emergency situations as per assigned duties on the station bill. OPERATIONAL DISCIPLINE REQUIREMENTS: Disciplined application and participation in the Task Planning & Risk Assessment Process. This is inclusive of: Understanding and perform the roles and responsibilities as assigned at the pre-job meeting. Understanding the hazards associated with the task. Understanding and effectively implementing the control measures required to mitigate identified hazards. Execute all tasks and task steps in a disciplined manner, following the sequence detailed in the relevant procedures. Recognize at risk behavior or conditions during tasks and call ‘Time out for Safety' when unsure, or when the job does not go as planned. Participate in After Action Reviews to feedback lessons learned from performing the task. HSE REQUIREMENTS: Protect personnel, the environment, and assets by eliminating hazards and reducing health and safety risks. Understand Company OI & HSE requirements applicable to the job position. Execute work in accordance with Company OI & HSE requirements. Call a Time Out when a real or perceived at risk behavior or unsafe condition is observed. Use WorkSight ENGAGE during the execution of planned work. Report all incidents, potential hazards, or abnormal situations to a supervisor. Incorporate the Control of Work process into all work, whether working alone or as part of a team. Understand and implement major accident barriers / controls applicable to the job position. Maintain a safe and organized work area throughout and on completion of all work. Understand your role in an emergency, as designated in the Emergency Response Plan and Station Bill. Participate in all emergency drills and exercises, as required. DUTIES: The underlying expectation is that all duties are carried out in compliance with the Company Operational Discipline expectations and HSE requirements. When considering assignment of duties for the Welder, the Supervisor and the Welder will apply the rules of task planning (CAKES) to determine if the assigned role is appropriate. This means confirming that the individuals involved have the knowledge, skills, and experience to carry out the task, and the task plan complies with policy before they are authorized to proceed. GENERAL DUTIES: Operations/Maintenance: Perform welding duties, including any preparation of site and materials, as directed. Carry out general fabrication and repair work that requires welding, torch cutting, brazing and burning operations as required. Fabricate and fit equipment, structures, tools, etc. Inspect welded joints for visible defects, correct dimensions, bead formation, weld penetration and conformance to work order and layout specification. Obtain a permit to work prior to the commencement of any electric welding, use of oxy-acetylene and grinding equipment. Ensure that an adequate supply of consumables is available for welding operations. Perform daily inspection and maintenance on welding equipment. Assist with duties, other than welding when required, to ensure the safe and efficient running of operations. If you want to push yourself to great achievement, let Transocean develop your career.

3575 25th St SE Salem Oregon 97302-1123 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. Valmont is currently seeking a highly motivated and talented individual for a Fabricator and Machine Operator position at our Salem, Oregon site. We are looking for a highly driven individual that will process material in accordance with shop drawings using fabrication machines and tools. Essential Functions: This position reports into (Supervisor title) and has (#) direct reports and (#) indirect reports This role requires up to (%) travel (internationally/domestically), including overnight stays Flexible schedule however must be able to work in the office xxx days per week Set-up and run a variety of drill presses Set-up and run hydraulic iron workers, sheer, punch, and cope Use several different layout tools Set up and run hydraulic Press Brake Set-up and run CNC Turret punch Maintain material traceability Set-up and run VMC Set up and operate a Hydraulic Press Brake Perform general housekeeping Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities): High School Diploma or GED equivalent Minimum of 1 year experience working in a fast-paced manufacturing environment Ability to lift, push or pull a maximum of 50 pounds Must be able to read a tape measure to within 1/32” Must be able to read shop drawings Must be self-motivated and a fast learner Demonstrated strengths in interpersonal skills, including the ability to adapt and professionally communicate with a variety of people Highly Qualified Candidates Will Also Possess These Qualifications: Industrial trade school in industrial machining One Year of previous qualified fabrication experience in a professional, manufacturing environment with press brake experience Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Working Environment and Physical Efforts: Educational Background Able to clearly communicate written and verbal instructions Proficiency in addition, subtraction, multiplication, division, fractions, fraction to decimal conversions, and the use of micrometers, protractors, and tape measures Ability to read specifications, bill of material, and simple and complex blueprints Job Training Skill Development Must be able to satisfactorily perform all functions of this position within 90 days of starting this position. Must pass Valmont forklift certification for all forklifts used in the position. Decision Making The decisions the person in this position makes affects inventory accuracy and availability of material for the production and shipping areas. The incumbent is responsible for prioritizing the workload to avoid lost time to all departments. Utilizes product mix in location assuring proper rotation of stored materials. Reviews space allocations and material flow to maximize utilization of space available. Able to apply creativity to solve the problems encountered within the scope of their activity. Examples would be to receive material, issue material, or resolve inventory discrepancies and implement the appropriate action to correct them. Effort: Physical Effort Operates equipment 50% of the time. Lifts, pushes, and carries material Mental and Visual Effort Coordination of eyes, hands and feet required to perform in an efficient and safe manner. Requires constant awareness. Must be able to accurately read and write part numbers and quantities on material, logs, move tags, and computer documents. Inventory logs and the computerized inventory system must be prepared and interpreted correctly. Due to the visual requirements of this position, employee must demonstrate acceptable vision by passing the eye test for an Oregon driver's license. If employee does not have a driver's license, the determination of acceptable vision will be made on an individual basis. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2025-10-20

Your next opportunity is here - Urgently hiring Welder Fabricators in Eugene, Oregon! Job Title: Welder Fabricator Pay: $22.00 - $24.00 per hour, DOE Hours: Monday - Friday, 6:30AM - 3:00PM As a Welder Fabricator, you'll play a key role in producing high-quality welded and fabricated components for essential water pumping systems and custom industrial projects. You'll work closely with a skilled fabrication team to ensure accuracy, craftsmanship, and safety in every piece you build. What You'll Do As a Welder Fabricator, you will be responsible for: Welding and fabricating vacuum chambers and fuel cells for water pumping stations Studying blueprints and Bills of Material (BOMs) to determine materials and task sequence Verifying material conformance using measuring tapes, squares, and rulers Aligning and fitting parts according to specifications Marking cutting and bending lines while accounting for thickness, shrinkage, and weld requirements Positioning workpieces manually or with forklifts and overhead cranes Setting up and operating fabrication machinery including brakes, rolls, shears, grinders, and drill presses Preparing surfaces for welding by removing rust, slag, grease, moisture, and other contaminants Clamping, tacking, grinding, bending, or bolting parts to achieve required configurations Welding in flat, vertical, and overhead positions using manual or semi-automatic equipment Monitoring welding and burning processes to prevent overheating, distortion, or warping Inspecting completed workpieces for defects and ensuring specification compliance Operating cranes safely and following proper protocols Maintaining welding and related equipment Learning company products and fabrication processes and accepting ongoing training Maintaining consistent, reliable attendance What You'll Bring The ideal candidate for this role will have: MIG welding experience with the ability to produce airtight welds Dual Shield welding experience (required) Strong mechanical aptitude and attention to detail Ability to read and interpret blueprints and fabrication drawings Physical ability to lift, position, and maneuver metal parts safely Willingness to learn, follow instructions, and work as part of a skilled team Why Join Us in Eugene? Career growth opportunities in a respected local fabrication shop Stable hours and supportive team culture Competitive pay based on experience Enjoy affordable health and prescription coverage once hired permanently Additional benefits offered by the employer after permanent hire Location & Schedule This position is on-site in Eugene, Oregon, and offers a Monday-Friday, 6:30AM-3:00PM schedule. Ready to Take the Next Step? If you're ready to start a rewarding career as a Welder Fabricator in Eugene, apply today or contact our recruiting team to learn more. Don't wait - we're hiring now! #STEUG

Read and interpret Drawings and work orders Fabricate / weld stainless steel components with attention to detail Must be able to safely operate the following production machinery: Shear Metal Saw Press Brake Overhead Crane Welder Ability to safely operate the following production machinery a plus: Hydraulic Punch Plasma Table Experience with a Bridgeport milling machine Non job specific duties as assigned Experience installing industrial equipment We are a small local company that manufactures high end, hand built commercial grade dehydrators. We offer PTO, medical and life insurance, and a Simple IRA. All new employees are subject to a 90-day probationary period. Education: High school or equivalent (Preferred) Experience: Fabrication: 2 years (Preferred) Probation Period: 90 days

BUILT TO CONNECT Astec is a global, environmentally focused infrastructure and manufacturing company of asphalt road building and aggregate processing. Our mission is to design and build the most innovative products for the industries we serve. Leveraging innovative solutions and technologies, we serve customers all over the world. ABOUT THE POSITION Under the direction and supervision of the Department Production Manager and in cooperation with the Production Supervisor and Production Lead, weld metal components with welding equipment to fit and join, fabricate, and/or repair heavy and large mechanical products per specifications and in accordance with the production schedule. Key Deliverables * Adhere to all safety rules and perform work at a quality level * Read and understand assigned blueprints prior to starting a project. * Participate in process and product development and improvement programs. * Accurately inspect metal prior to welding to ensure clean welds. * Perform grinding operations that comply with Astec's standards. Key Activities & Responsibilities * Ability to perform grinding and be able to pass a required welding skills test. * Necessary to be able to do all Grinder tasks. * Must be able to safely perform gang-welding techniques (dos and don'ts). * Must be able to safely weld vertical, flat, and overhead with both MiG and stick. * Must inspect metal prior to welding for smoothness and acceptability and clean welds to presentable state (grinding operations). * Must work with Fitters on proper assembly of equipment. * Keep work area clean and neat. * Clock in on assigned jobs as appropriate. * Ensure welding machine settings are appropriate for work to be performed. * Must be able to safely use cranes and forklifts. * Must be trained in and know PPE requirements for welding including hood and filter shades and arm/body protection. * Must be able to read and understand weld symbols. * Must maintain welding machines by keeping them clean and changing liners in the welding guns. * Follows company policies and procedures at all times. * Follows proper safety rules and procedures at all times. * Performs other duties as assigned. To be successful in this role, your experience and competencies are: * High School Diploma or GED required. * 0-1 Year of Welding experience required. * Heavy equipment manufacturing experience preferred * Computer experience desired, particularly the ability to use a mouse and locate and open/close programs/files. * Knowledge and ability to perform all Grinder tasks required. * Ability to properly and safely MiG weld, stick weld, and arc gouging required. * Ability to read and understand weld symbols required. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. * Continuous devotion to meeting the needs of our customers * Honesty and integrity in all aspects of business * Respect for all individuals * Preserving entrepreneurial spirit and innovation * Safety, quality and productivity as means to ensure success WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person's veteran status or any other characteristic protected by law or executive order.

We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Tangent, OR facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon. 2. Operate air arc to remove steel (back gouging). 3. Grind with 90° angle grinder. 5. Read weld symbols and check weld size using weld fillet gauges. 6. Heat material to required temperature using temperature sticks and heating torch/cutting torch. (read and follow pre-heart & interpass temperature tables.) 7. Set machines according to procedure charts. 8. Use air chipper to chip of slag. 9. Use natural gas propane heaters to pre-heat steel. 10. Operate stud welder. 11. Follow weld procedures as it applies to volts, amps & wire feed speed. 12. Heat, straighten and be able to know when to use pre-heat to offset distortion. 14. Perform other duties as required by management. Shift Times: Day (M-F): 6:00am-4:30pm Swing Shift: 4:30pm-3:00am Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.