Fabricator jobs in Owensboro, KY - 505 jobs

Metal Fabrication (unskilled) is responsible for learning the basic skills needed to setup and operate machines in a safe manner. Metal Fabrication must also be able to cut parts for units as needed, and meet/exceed all production goals. Essential Job Functions * Knowledge of manufacturing principles * Knowledge of air tools, bench grinders, and drill & punch press equipment * Must be able to read and understand prints * Knowledge and use of tape measure to the 32nd * Knowledge of CNC operation Non-essential Job Functions * Must be a great problem solver * Communicate well with others * Organize work area

Metal Fabrication 1 is responsible for learning the basic skills needed to setup and operate machines in a safe manner. Metal Fabrication must also be able to cut parts for units as needed and meet all Godfrey Marine production goals. **Essential Job Functions** **-** Knowledge of air tools, bench grinders, drill & punch press equipment -Must be able to read and understand prints -Knowledge of CNC operation -Knowledge and use of tape measure to the 32nd - Able to understand and follow the requirements, policies, and guidelines set forth within the Code of Conduct & Employee Handbook expectations. - Must have reliable transportation to get to work. -Must be able to follow the Company's Safety and Personal Protection Equipment (PPE) guidelines. **Requirements** -Ability to continuously stand, walk, reach while frequently crouching, bending, & climbing throughout the workday. -Must be able to work in a non-airconditioned environment. -Ability to professionally work with team members, Team Leads, Group Leaders, and Supervisors to achieve daily work targets. -Able to learn or prior experience with common hand tools to assemble parts. This will be demonstrated by successfully passing the bench, simulation test. -Must be able to listen, understand, and follow the instructions and coaching feedback provided by Team Leads, Group Leaders, Supervisors and/or Plant Manager. -Ability to understand importance of following work instructions to compete the daily work targets with zero defects. **Other Skills/Abilities** - Must be able to professionally and effectively communicate with Team Leads, Group Leaders, Supervisors and Plant Manager. - Ability to quickly adapt to changes in responsibility (work duties) processes, procedures, or work schedules. **PPE Requirements** - Safety glasses & shoes when inside production areas. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled

GE Vernova (NYSE: GEV) Addressing the climate crisis is an urgent global priority and we take our responsibility seriously. That is our singular mission at GE Vernova: continuing to electrify the world while simultaneously working to help decarbonize it. If we want our energy future to be different…we must be different. Our mission is embedded in our name. We retain our treasured legacy, "GE," in our name as an enduring and hard-earned badge of quality and ingenuity. "Ver" / "verde" signal Earth's verdant and lush ecosystems. "Nova," from the Latin "novus," nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have The Energy to Change the World. Learn more at ***************** GE Vernova - Erlanger Service Center manufactures and repairs assemblies for steam power plants. As an operator/metal fabricator you will use various machines and perform layout operations to fashion components for these assemblies. This is a 2nd shift onsite position only available at our Erlanger, KY Service Center. The typical work schedule is Monday to Thursday, with weekend work/OT as optional. Available shift is 2:30PM to 1:00AM. Job Description * Sets-up and operate fabricating machines such as press brake, drill press, plate rolling machine, CNC plasma table, and cold saw * Operate cranes, forklifts, and bevellers * Basic blueprint reading - Understanding specifications to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements * De-burr, grind and finish with hand tools or power-driven equipment * Produce high quality work and achieve tight tolerances to fixtures and engineered drawings * Maintain clean, organized, and safe work environment following all safety standards and requirements * Perform preventative maintenance tasks as required Basic Qualifications * High School Diploma / GED * 3+ years of press break, machining, or welding experience within a heavy industrial manufacturing setting Desired Qualifications * Blueprint reading * Ability to layout holes on a radius * Working knowledge of metrology instruments (radius gauges, calipers, micrometers, ruler, and height gauge) * Strong math skills Pay Transparency The pay range for this position is $27.00 to $32.00 USD per hour. The specific pay rate offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. * The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No For candidates applying to a U.S. based position only: * The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on December 01, 2025. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Job DescriptionSheet Metal Fabricator Operator: Rockford, IllinoisOur client in Rockford, Illinois is a manufacturing company that is committed to providing excellent service to their customers while producing a quality product. The ideal candidate would be a motivated individual that can contribute to the overall success of the company. Responsibilities of the Sheet Metal Fabricator Operator: Read and interpret blueprints, technical drawings, and specifications to determine material requirements and fabrication techniques. Use tools such as shears, lasers, and plasma cutters to cut sheet metal to specified dimensions. Operate bending machines, press brakes, and rollers to shape and form metal components according to design requirements. Assemble and weld metal parts using techniques such as MIG, TIG, and spot welding to create final products or structures. Use hand tools and power tools to trim, grind, and finish metal surfaces. Ensure that all welds, joints, and seams are properly finished and meet quality standards. Inspect fabricated parts and assemblies for accuracy, quality, and adherence to specifications. Perform dimensional checks using measuring instruments such as calipers, micrometers, and gauges. Address and correct any defects or discrepancies found during inspection. Sheet Metal Fabricator Operator Requirements and Qualifications: Previous experience in sheet metal fabrication or a similar role is highly desirable. Proficiency in reading blueprints and technical drawings. Experience with metalworking tools and machinery. Knowledge of welding techniques. Ability to lift and handle heavy materials, stand for extended periods, and work in various environmental conditions. Pay for Sheet Metal Fabricator Operator: Starting at $18-$25/hour.Sheet Metal Fabricator Operator Benefits: Health insurance. Paid time off. 401k with company match. Paid weekly. Direct deposit. Paid training. Type: 1st Shift, Full-time.Schedule: Monday-Friday from 7:30am - 4:00pm. Apply Now!Are you ready to move from the worries of today to your dreams of tomorrow? If so, give Hughes a call. We are the top-rated staffing, recruiting, and HR experts in the region. We are headquartered in Freeport, IL and have 11 locations across Illinois, Wisconsin, and Minnesota. Where we have offices, we have connections to the best local jobs! Walk in our doors and you'll find friendly professional staff who dig deep, get results, and most importantly have fun! The reviews speak for themselves, at Hughes we quickly hook you up with companies that offer competitive pay rates, great culture & benefits, and a chance to elevate your life. We offer health insurance and 401(k) too to all our employees. To get the ball rolling, visit us online at www.hughesrecruiting.com and complete our application. We'll be in touch soon!

Job DescriptionBenefits: Flexible schedule SPECIALTY METAL FABRICATION SHOP, utilizing sheet metal and steel. Must have 5 years experience with general working knowledge of Welding Sheering, Break Press, Punch Press, Grinding, DA Finishing ,and Packing. Hours = 7:30 am - 4:30 pm - Full time or Part Time available Must speak English Manufacturer of Church Furnishings - Family Owned and Operated for over 75 years

Job DescriptionBenefits: 401(k) Employee discounts Health insurance Opportunity for advancement Paid time off A very busy automotive restoration facility in LaGrange, Il seeks a self motivated, hard working individual. We specialize in frame off restoration and high end, exotic vehicle collision work. Responsibilities: Fabricate body panels and related components as needed. Perform corrosion repair. Perform metal straightening of both steel and aluminum panels. Fit and ensure proper panel gapping. Weld both steel and aluminum. Remove and replace body panels in a factory type manner. Maintain a professional, safe and clean work space.

Established in 1999, Onyett Fabricators is a dedicated shop providing fabrication and field services, welding, and other structural metalwork for the coal, aggregate, and construction industries. Onyett has 34,000 square feet of shop space and operates 24/7 to meet our clients' needs. SERVICES * Line Boring, Shop and Field * All Size Bucket Repairs * Structural Steel Fabrication * Dozer Repairs and Liners * Ripper Repairs and New Machined AR400 Rippers * Barge and Pontoon Fabrication * Hard Facing and Tungsten Carbiding Capabilities * Multiple Machining Capabilities * Drill Stem Repairs and Manufacture * New Stock Plate in Mild Steel, AR400, Nickel Chrome and Chromium Clad Overlay AREAS OF WORK * Coal Mines * Power Plants (Gas, Coal) * Cement Plants * Aggregate (Rock and Sand) * Farming * Construction (Dirt and Asphalt) * Dredging * Tunneling and Boring Companies PORTABLE FIELD SERVICE 20 Trucks Equipped with: * Cranes * Welding Equipment * Air Arcs * Air Compressors * Line Boring Equipment MACHINE SHOP 34,000 sq ft, 24/7 Work Hours Overhead Cranes Five (5) 5-ton Cranes Two (2) 2-ton Cranes Cutting Table Plasma CNC Cutting to 2 in Torch CNC Cutting to 6 in Blast and Paint Capabilities 2,100 sq ft Paint Bay Presses 450-ton Press 1,000-ton Press up to 20 ft Long Toshiba/Shibaura CNC Horizontal Boring Mill 5 Axis Table, 118 in Cross Travel x 95 in Height Travel 25,000 lb Capacity Haas Vertical Machining Center 4 Axis Table, 50 in x 25 in Travel 16 Position Tool Changer Toshiba CNC Vertical Lathe 59 in x 70 in Table with 59 in Height 17,600 lb Capacity Viper VT-50 CNC Lathe 25 in Double Chucks 9.25 in Spindle Bore 34 in Turning Capacity x 40 in Swing Cincinnati Milacron Avenger 250S Lathe 10.39 Diameter x 16.42 Length Sub Spindle 65 in Poreba Hollow Spindle Lathe Double Chucks Swing 47 in x 120 in Center to Center Chucks Primary Responsibilities * Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools * Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes * Move parts into position, manually or with hoists or cranes * Study engineering drawings and blueprints to determine materials requirements and task sequences * Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components * Layout and examine metal stock or workpieces to be processed to ensure that specifications are met * Tack-weld fitted parts together * Lift or move materials and finished products, using large cranes Required Skills Education and/or Work Experience Requirement: * High school diploma or equivalent. * Basic mechanical knowledge required. * One-year machinist experience and/or machine trades technical schooling preferred. * Ability to read, write, and comprehend basic written and verbal instructions. * Ability to understand, perform, and retain various job-related training, operational, and safety procedures. * Ability to operate overhead cranes, forklift trucks, and other equipment. Physical Requirements: * Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federals, state, and local standards, including meeting qualitative and/or quantitative productivity standards. * Ability to maintain regular, punctual attendance * Must be able to lift and carry up to 50 lbs. * Must be able to work outside with various weather conditions Traylor Bros., Inc. is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, veteran status, sex, sexual orientation, gender identity, age, genetic information, pregnancy, disability, protected activity, or other non-merit factors.

←Back to all jobs at COMLUX AMERICA LLC Sheet Metal Fabrication Lead Sheet Metal Fabrication Lead Under minimal guidance, assign job tasks to Sheetmetal Technicians in their charge in accordance with approved or accepted data and with serviceable materials and assist with same, assuring that all work is documented on the forms set forth in the repair station manual. Assuring all assigned work tasks are completed relative to the completion schedule and department budget. Plans, lays' out, fabricates, installs, assembles, and repairs both internal and external aircraft structures and surfaces on VIP aircraft in accordance with technical manuals, engineering drawings, and FAA regulations. EXAMPLES OF ESSENTIAL JOB FUNCTIONS: 1. Assist and instruct work crew with fabrication or installation of Sheetmetal parts and assemblies per engineering drawings or maintenance manuals on VIP aircraft ensuring all FAA and Company requirements are met. 2. Communicate schedule attainment, conformance and “hot” jobs on a daily basis at shift start-up meetings and attend assigned project meetings. 3. Meet 100% shop completion for assigned work center. 4. Lead and coach employees in the improvement of productivity and the reduction of costs. 5. Assign work for optimal utilization of resources and ensure back up plans for under-utilized resources as applies. 6. Request and redeploy resources according to inter-departmental needs as applies. 7. Responsible for quality of work completed as well as budgeted labor hours. 8. Process daily paperwork such as task cards, time cards, and turnover report. 9. Ensure employees are coached and trained in the quality system and quality improvements including the documentation of variances as applies. 10. Enforce compliance to the quality and certification systems. 11. Direct cross training of employees as applies. 12. Assist in evaluations for employees. 13. Enforce Company policies and procedures. 14. Enforce attendance guidelines uniformly. 15. Monitor safety conditions and practices in the facility as well as enforce correct safety practices and procedures for all employees and visitors. 16. Performs other related duties as assigned. MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC: 1. High school diploma or GED, plus a technical training/diploma/certificate in aircraft mechanics, or aeronautics from at least a 2 year technology institution plus 3 years of applicable experience in the same or similar job in the military or within the aviation industry; or 6 years of applicable experience in same or similar job within the aviation industry. 2. Demonstrated leadership capabilities. 3. Thorough knowledge of high end VIP aircraft Systems and Interior Install to include fabrication, installation, removal and repair. REQUIRED SKILLS AND ABILITIES: 1. Proficient knowledge and expertise with VIP completion production skill sets and aircraft operation and maintenance. 2. Strong knowledge of FAA requirements for VIP and maintenance aircraft. 3. Strong ability to provide verbal and written communication. 4. Ability to read and interpret blueprints and engineering documentation. 5. Working knowledge of computers and related software. 6. Knowledge of lean or other continuous improvement opportunity techniques. 7. Demonstrated ability to Lead and motivate a team. 8. Ability to effectively set and achieve realistic production targets with the technicians working in a high demand service oriented environment. 9. Ability to communicate in an assertive yet professional, motivating and tactful manner. 10. Strong understanding of man hour allocation. 11. Willing to travel domestically and internationally when required. WORK ENVIRONMENT: The work environment described here is representative of those required by an employee to perform the essential functions of this job with or without reasonable accommodations. The hangar where this position works is in an environment which may have exposure to excessive noise or adverse environmental issues such as fluctuations in temperature. The employee in this position will experience occasional outdoor exposure to heat, cold, and environmental elements. Please visit our careers page to see more job opportunities.

Job Description T & T Plumbing & Heating Inc, in Laotto, IN. We are a family owned and operated Plumbing, HVAC, and Geothermal contractor serving Northeast IN and the surrounding Fort Wayne areas. For over 40 years we have been committed to providing best-in-class reliable service to homeowners and business owners alike. We are looking for a HVAC Warehouse / Sheet Metal Fabricator to join our team! Position Summary: As the Sheet Metal Worker you will hand lay out HVAC fittings, measure, cut, bend, and assemble ductwork systems for residential and light commercial HVAC installations. This person will play a key role in staging and organizing job materials, assembling material lists, and assisting in creating purchase orders to ensure smooth shop operations. This role will also involve receiving deliveries, organizing materials, and maintaining a clean, efficient shop when not fabricating. Forklift experience is a plus, as is the ability to lift moderate weights to move boxes and materials as needed. Position: Sheet Metal Fabricator / HVAC Warehouse Pay Scale: $18.00 - $22.00 per hour, depending on experience Work Hours: Monday through Friday, 6:30am to 3:00pm, with occasional overtime What T&T have to offer: Full-time, year-round work Company reputation - Be a part of a company that is known for providing quality service! Training opportunities for career growth, industry certifications, and advancement Benefits: 70% company Paid Medical Insurance W/ Low Deductibles Dental Insurance Vision Insurance Life Insurance Short Term Disability Paid Vacation 3 Sick days (24 hours) 2 Personal days (16 hours) 6 Paid Holidays 401K W/ Company Match Tuition Reimbursement Company uniforms Required Qualifications: 1+ year of experience in sheet metal work or a related field desired Valid driver's license and insurable driving record Ability to read and interpret blueprints and shop drawings Strong attention to detail and commitment to safety Proficiency with hand tools, power tools, and sheet metal equipment (shears, brakes, etc.) Ability to lift, carry, and move sheet metal materials Willingness to travel to job sites within the service area as needed Familiarity with HVAC systems and airflow principles desired Forklift experience desired Check us out online: ************* WE DO NOT ACCEPT APPLICATIONS VIA EMAIL, PHONE, OR WALK INS. ONLY APPLICATIONS RECEIVED THROUGH THE PROVIDED LINK WILL BE CONSIDERED

Welder - Structural This person must be able to join steel components or metal plates using blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: * Uses Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc or Shielded Metal Arc welding processes. * Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. * Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. * Preheats work pieces for the preparation of welding or curving, using torch. * Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. * manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. * remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. * Climbs up ladders or works on scaffolds to take apart textures. * In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. * Other duties as assigned. Qualifications Required for this Position: Education - no minimum education requirements. Experience - 2-4 years of Journeyman level experience. * Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Benefits & Compensation We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to ********************************************************* . Austin Industrial is an Equal Opportunity Employer. See the "Know Your Rights" poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at **************.

Welder - Structural This person must be able to join steel components or metal plates using blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: + Uses Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc or Shielded Metal Arc welding processes. + Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. + Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. + Preheats work pieces for the preparation of welding or curving, using torch. + Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. + manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. + remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. + Climbs up ladders or works on scaffolds to take apart textures. + In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. + Other duties as assigned. Qualifications Required for this Position: **Education** - no minimum education requirements. **Experience** - 2-4 years of Journeyman level experience. + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (************************************************************************************** and Spanish (**************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

BASIC FUNCTION: Under moderate supervision, welds metal parts together according to layouts, blueprints, or work orders using welding processes for given work areas. (May also lay out guidelines on metal parts and cut metal with cutting torch.) MAJOR DUTIES: Adjusts automatic welder properly for material being welded. Lays out and sets up own work. Welds parts and subassemblies per blueprints. Produces quality weldments and/or welding assemblies in one or more areas. Performs other duties as assigned by leader or supervisor. QUALIFICATIONS: General knowledge of welding techniques, tools, equipment, and blueprint reading is preferred. Ability to read precision measuring tools is required. Skills may be gained through practical experience and/or on-the-job training. PHYSICAL REQUIREMENTS: Frequent climbing, bending, twisting and/or lifting approximately 55 pounds (and periodically heavier loads approximately 75 pounds) will be required. All welders must install 60 pounds spools of wire on own welding equipment, as necessary. ADDITIONAL COMMENTS: All work will be done in a timely manner within established quality standards and consistent with Company policies, priorities and needs. The individual holding this position has a broad responsibility for carrying out the objectives of the Company including supporting all company policies, meeting goals, and working as a contributing team member. Performance will be measured on the function/duties described in the position description, accomplishments during the review period, and the methods/work skills used to achieve the goals.

Welder - Structural This person must be able to join steel components or metal plates using blueprints, work orders, welding procedures or oral instructions through the application of heat or electric arc-welding equipment. Other duties may be assigned. Specific Duties and Responsibilities: Uses Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc or Shielded Metal Arc welding processes. Unites pipes from torch to tanks of oxygen and fuel gas and turns valves to release mixture. Reaching expected temperature, size, and color of flame by burning torch and adjusting flow of gas and air. Preheats work pieces for the preparation of welding or curving, using torch. Fills holes or corrects mistakes in lead pieces and makes bulges thin and curves in metal work pieces. manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. Climbs up ladders or works on scaffolds to take apart textures. In order to protect the torch chooses place of weld based on type, thickness, area, and expected temperature of metal. Other duties as assigned. Qualifications Required for this Position: Education - no minimum education requirements. Experience - 2-4 years of Journeyman level experience. Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Benefits & Compensation We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to https://www.austin-ind.com/our-company/100-employee-owned . Austin Industrial is an Equal Opportunity Employer. See the “Know Your Rights” poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial . No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( i.e. , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.

Job DescriptionSalary: Founded in 1921, HMC Gears has become one of the lead manufacturers of large gears, and their components, in the United States. As a custom job shop, every day brings a diverse set of challenges and successes. Our welders provide invaluable skills to our production team and take our gears to the next level. Welders are responsible for welding and fabricating heavy metal components by hand or flame-cutting equipment according to blueprints and specifications. The ideal candidate will have experience with MIG, TIG, FCAW, and SAW (submerged arc welding) welding techniques and a commitment to producing high-quality work. Responsibilities include but not limited to: Reading and understanding blueprints and drawings Setup parts Weld, cut, grind, and run production of large gears Assembly and disassembly Self-inspect and ensure welds meet quality standards Perform preventative maintenance on welding equipment Load/unload and monitor oven Operating overhead cranes and forklifts Qualifications Certified welders are preferred but not required Welding experience (Arc, Tig, Mig) required Ability to lift 50 pounds as required without assistance This position can be exposed to heat, cold, fumes or airborne particles, debris such as metal shavings, loud noise, vibration and moving mechanical parts. Protective gear such as earplugs, safety glasses, steel toe footwear, and gloves are required. The physical demands of this position include vision, hearing, manual dexterity, standing or walking for long periods, reaching, bending, lifting and carrying up to 50lbs, climbing, kneeling, crouching, crawling, stooping, pushing, and pulling. This is a permanent position with competitive wages and exceptional benefits including PTO, company paid holidays, health insurance, company paid dental insurance, group life/ short-term disability insurance, optional wellness programs, retirement plan, and more. *Candidates must be authorized to work in the U.S. and able to commute to Princeton, IN.

Welder Department: Equipment and Shop Services Reports to: Fab Shop Supervisor Works to repair and construct new fabricated products while contributing to the overall atmosphere with a positive, safety conscious, and proactive attitude. Welders will build and fabricate equipment for use in Frontier-Kemper's Mining, Civil Divisions, while also constructing new OEM equipment provided to outside customers by our Lake Shore division. A well rounded skill set, willingness to learn and work well with others both in and out of their immediate department are essential. ROLES AND RESPONSIBILITIES: Must comply with all company policies and be able to work in way that does not pose a threat to themselves and others. Efficiently and accurately complete work assigned by management. Provide high quality and accurate fabricated items based on supplied drawings. The safe operation of forklifts and overhead cranes to perform work. Evaluating equipment to assess damage and wear. Periodic facility maintenance and repairs to work areas in the shop. Participate with all departments of FKCI to improve efficiency, quality, and safety. Work overtime as needed. Perform the physical requirements of walking on uneven surfaces, standing constantly on a hard surface, climbing stairs or ladders, reaching, bending, and kneeling. Constant exertion of 10-20 lbs of force to lift, carry, push or pull objects; frequent exertion of 25-50 lbs of force and occasional exertion of 50-100 lbs of force. Must be able to work outside in all weather conditions. Other duties as assigned. SUPERVISION RECEIVED AND GIVEN: Welders report directly to the Fab Shop Supervisor. DECISION MAKING: Responsible for decisions as they relate to completing assigned work in a safe and effective manor. QUALIFICATIONS AND REQUIREMENTS: Education High school diploma or equivalent. AWS D1.1 Certified for structural welding. Experience with SMAW (stick), MIG (wire), and TIG welding methods. Ability to read blue prints and perform layout work. Tools Must be supply own tools Experience 5 years related experience preferred. Structural steel experience preferred. Excellent communication and interpersonal skills. Familiar with shop practices including machine work, mechanical repair and steel fabrication. Skills: Self-motivated and able to work with minimal supervision. Ability to understand and interpret technical drawings and perform work layout. Ability to communicate with others effectively. Ability to work in a collaborative manner with multiple team members in different departments. Ability to handle multiple tasks in a fast paced environment. Due to the contractual nature of our work, time is of the essence. The scheduling, completion, and delivery of the work make regular attendance an essential requirement of the job. Equal Opportunity Employer

Job DescriptionCDR General Services is seeking a Class A Welder to join our team near Wickliffe, Kentucky, with experience working in barge repair. The ideal candidate for this position will be a motivated individual with strong work ethics, problem-solving abilities, and a commitment to providing results in a fast-paced environment. Job DetailsJob Type: Full-TimeJob Location: Wickliffe, KYPay Rate: $27 per hour Schedule: Monday - Friday, 2:30 PM - 10:00 PM Key Responsibilities· Perform high-quality welding on barges during repair and maintenance projects· Weld structural components including plates, frames, stiffeners, and bulkheads· Read and interpret blueprints, sketches, and welding symbols· Perform Flux Core (FCAW) and Stick welding (SMAW) using 6010, 6011, and 7018 electrodes· Work with stainless steel and carbon steel materials as required· Work closely with fitters and supervisors to ensure proper alignment and weld quality· Inspect welds to ensure compliance with specifications and quality standards· Operate welding equipment, torches, grinders, and other tools safely· Follow all safety procedures and maintain a clean, organized work area· Complete work efficiently while meeting production schedules Qualifications· Minimum of 2+ years of experience as a Class A Welder required· 2+ years of experience in barge repair or marine welding required· Proficient in Flux Core (FCAW) and Stick welding (SMAW)· Experience welding with 6010, 6011, and 7018 electrodes· Familiarity with stainless steel welding and fabrication· Ability to read and interpret blueprints, welding symbols, and technical drawings· Strong knowledge of welding structural steel in a marine environment· Ability to work independently and as part of a team· Strong attention to detail and commitment to quality workmanship· Ability to work in a fast-paced, industrial environment· Must be able to stand, bend, lift, and work in confined spaces as required

Overview Perform diversified jobs relating to the welding of various parts, assemblies, balers, etc. involved in the manufacturing of the product line. Responsibilities Qualifications Ability to set up and operate welding machines Ability to mig weld in horizontal, vertical, and overhead positions Read blueprint drawings and parts list to determine proper machine fabrication Safely utilize all tools and equipment Attention to accuracy and detail Communicate with supervisor regarding safety and quality issues Physical Requirements Heavy industrial environment with mechanical activities requiring personal protective equipment. While performing the duties of this job, the employee is regularly required to: Stand for extended periods of time Sit, Stoop, Bend Reach above shoulders Lift 50 pounds Benefits Health, Dental, and Vision Insurance Life Insurance 401(k) & Company Match Vacation Holidays Pay Rate & Schedule Pay rate is based on experience and skill level Full-time Monday - Friday Qualifications Pre-employment Requirements Background check Drug Screening Physical Pre-employment Requirements Background check Drug Screening Physical Qualifications Ability to set up and operate welding machines Ability to mig weld in horizontal, vertical, and overhead positions Read blueprint drawings and parts list to determine proper machine fabrication Safely utilize all tools and equipment Attention to accuracy and detail Communicate with supervisor regarding safety and quality issues Physical Requirements Heavy industrial environment with mechanical activities requiring personal protective equipment. While performing the duties of this job, the employee is regularly required to: Stand for extended periods of time Sit, Stoop, Bend Reach above shoulders Lift 50 pounds Benefits Health, Dental, and Vision Insurance Life Insurance 401(k) & Company Match Vacation Holidays Pay Rate & Schedule Pay rate is based on experience and skill level Full-time Monday - Friday

Job Description Looking for experienced welder fabricator that can stick weld in all positions. We are repairing Rock/Sand Hopper barges. The work is performed in the wing tanks and hoppers. Must demonstrate the ability to weld all positions with wet and rusty thin metal. Must be able to enter the barge man hole covers and climb down 12' ladder. Previous Dry dock experience is a plus. Monday thru Friday 10 hour days and 6 hours on Saturday. Benefits include: Competitive hourly pay with overtime Traditional 401(k) / Roth 401(k) retirement plans with up to 3% matching Health Insurance with low premiums and free urgent care clinic through Deaconess At-Work Voluntary wellness program Paid holidays and vacation days

This position will perform the functions of a skilled welder. They will work from structure plans to weld various parts. * Measure, cut, and join appropriate metals to specifications * Use grinder to smooth and clean as appropriate * Inspect work and fill/repair as necessary * Test the strength of each joint during and after project completion * Identify hazards, defects and needs for adjustments to ensure compliance with applicable codes, laws, working practices, and health and safety * Clean and maintain all equipment and tools and keep work areas neat * The above list of duties is not to be construed as an exhaustive list. Other duties logically associated with the position may be assigned. Qualifications: * Knowledge of MIG welding criteria per QA and passing our skills test * Operate grinders and torches * Excellent stamina, strength and dexterity * Good time-management skills * Sound understanding of safety rules, regulations, and safe job procedures * Must be able to assist in other areas as needed and follow all quality procedures Pittsburg Tank & Tower Group is an equal opportunity employer. FLSA Classification: Non-Exempt Work Hours: Varies