Fabricator jobs in San Antonio, TX - 43 jobs

Job Summary The Fabricator is responsible for welding complex assemblies as required using TIG and some MIG welding techniques. Essential Job Duties and Responsibilities • Operate safety equipment and use of safe work habits. • Operate welding equipment to fuse metal segments, using processes such as gas tungsten arc ( Tig Welding), gas metals (Mig Welding) or stick welding. Process include stainless steel for food grade, aluminum and carbon steel. • Weld components in flat, vertical or overhead positions. • Clamp, hold, tack-weld bend, grind or bolt component parts to obtain required configuration and positions for welding • Detect faulty operation of equipment or defective materials and notify supervisors • Monitor the fitting, burning and welding process to avoid overheating of parts or warping, shrinking, distortion or expansion of material. • Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. • Recognize, set up and operate hand power tools common to the welding trade, such as shield metal are and gas metal are welding equipment. • Layout, position, algin and secure parts and assemblies prior to assembly, using straightness, combination squares, calipers and rulers • Position, align, fit and weld parts to form complete units or subunits, following blueprints and layout specifications, using jigs, welding torches and hand tools. • Verify conformance of work pieces to specifications, using squares, rulers and measuring tapes. • Lay out and examine metal stock or work pieces to be processed to ensure that specifications are met • Align and fit parts according to the specifications, using jacks, turnbuckles, wedges, drift pins and hammers. • Locate and mark work piece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage and other components specifications. • Study engineering drawings and to blueprints determine material requirements and task sequences. • Must have the ability to navigate a CMMS system to complete assigned work orders. • Must have the ability to perform safety checks on machines. • Dismantle devices to gain access to and remove defective parts pr damaged parts. • Start machines/devices to test their performance • Dismantles, repairs and reassembles motors valves, gearboxes, pumps, etc. • Must be available to work additional hours as required to keep production running at peak performance when machines are down or not in operation. • Maintains continuity among shifts by documenting and communicating actions, irregularities and continuing needs. • Follow safety rules and produces and observes the operations to insure a safe environment • Responsible for neat, clean and attractive appearance of workshop for adherence to GMP's and OSHA regulations. • Operate forklift • Possess simple knowledge of rigging when necessary for equipment moving and relocation • Must be able to complete other duties assigned by supervisors. • All jobs and tasks are expected to be completed in a timely manner. • Must be able to speak, read, and write in English to complete work orders on a tablet. Education and Experience • High school diploma or GED certificate • Completion of a technical trade program or training program, preferred • Fitting and welding experience preferred • Basic math, reading, and computer skills • Valid driver's license Working Environment and Physical Demands While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand and walk. The employee is occasionally required to sit; use hands to finger, handle, and feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; taste and smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee will be exposed to a noisy environment that varies from hot to cold in temperature, may be exposed to all chemicals used in poultry, food, processing facility, and must wear and use protective and safety equipment required for the job as directed by the Company. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

There's never been a better time to join Stratus! As the market leader in brand implementation and maintenance, we transform how national brands connect with their customers. From exterior signage & interior branding to site refresh & remodel, from energy & lighting to repair & maintenance solutions, we deliver ideal solutions to meet all our client's branding needs. From our locations across the country, to our corporate headquarters in Mentor, Ohio, every employee is a stakeholder in Stratus' success. This environment offers endless career opportunities for individuals with a commitment to customer service, focus on execution and bias for action. Job Sumary: The Fabrication Lead oversees daily operations in the fabrication department, ensuring the production of high-quality signs, frames, structures, and other custom components. This role combines technical expertise with leadership responsibilities, focusing on efficient workflows, team mentoring, and maintaining safety and quality standards. The Fabrication Lead is also responsible for troubleshooting issues, coordinating with other departments, and driving continuous improvement initiatives. Responsibilities Oversee and guide the fabrication team, ensuring projects are completed on time and meet quality standards. Fabricate and assemble signs, frames, and structures using equipment such as CLN Notcher, CLN Bender, and Letter Lock Punch. Set up, operate, and troubleshoot fabrication machinery to ensure smooth operations. Review work orders, blueprints, and project specifications to plan and prioritize tasks. Train and mentor team members to enhance their skills and ensure adherence to company standards. Inspect completed work to ensure it meets specifications and address any quality issues promptly. Monitor inventory levels of materials and tools, coordinating with procurement as necessary. Collaborate with the Production Supervisor to address personnel issues, optimize workflows, and resolve production bottlenecks. Document production activities, including material usage, job progress, and equipment maintenance. Maintain a clean and organized work environment to promote safety and efficiency. Perform routine maintenance on fabrication equipment and tools to ensure reliability and longevity. Qualifications Must be at least 18 years old. High school diploma or equivalent preferred; additional certifications in fabrication or related fields are a plus. 3+ years of fabrication experience, with expertise in operating and maintaining fabrication equipment. Experience in the custom sign manufacturing industry preferred. Previous leadership or team coordination experience is highly desirable. Advanced mechanical skills, including proficiency with power tools, punch presses, press shears, and other fabrication equipment. Strong organizational and time-management skills to oversee multiple projects simultaneously. Ability to read and interpret blueprints, engineering drawings, and work orders. Excellent communication skills to provide clear instructions and feedback to team members. Problem-solving abilities to address production challenges and implement process improvements. High attention to detail and a commitment to maintaining quality standards. Ability to stand, bend, and move for extended periods. Regularly lift and handle materials weighing up to 50-80+ lbs, with the use of lifting equipment as necessary. Comfortable working in a manufacturing environment with moderate to loud noise levels. Familiarity with lean manufacturing principles or continuous improvement practices is a plus. Proficiency in using computer systems for documentation and tracking production activities. Why Work With Us Supportive & Friendly Culture Manage national accounts for Fortune 500 companies Medical, Dental, Vision coverage options Flexible Spending & Health Savings Accounts Company paid Life Insurance 401k with Employer Contribution Company paid Short/Long Term Disability Generous Paid Time Off program + Holidays Career Growth Opportunities and Career Mapping Additional perks including Pet Insurance, Employee Assistance Program, Educational Assistance Program, Identity Theft Protection, Critical Illness Plans, Commuter Benefits and various employee discount offerings from our Vendors eeo/mfdv

There's never been a better time to join Stratus! As the market leader in brand implementation and maintenance, we transform how national brands connect with their customers. From exterior signage & interior branding to site refresh & remodel, from energy & lighting to repair & maintenance solutions, we deliver ideal solutions to meet all our client's branding needs. From our locations across the country, to our corporate headquarters in Mentor, Ohio, every employee is a stakeholder in Stratus' success. This environment offers endless career opportunities for individuals with a commitment to customer service, focus on execution and bias for action. Job Sumary: The Fabrication Lead oversees daily operations in the fabrication department, ensuring the production of high-quality signs, frames, structures, and other custom components. This role combines technical expertise with leadership responsibilities, focusing on efficient workflows, team mentoring, and maintaining safety and quality standards. The Fabrication Lead is also responsible for troubleshooting issues, coordinating with other departments, and driving continuous improvement initiatives. Responsibilities * Oversee and guide the fabrication team, ensuring projects are completed on time and meet quality standards. * Fabricate and assemble signs, frames, and structures using equipment such as CLN Notcher, CLN Bender, and Letter Lock Punch. * Set up, operate, and troubleshoot fabrication machinery to ensure smooth operations. * Review work orders, blueprints, and project specifications to plan and prioritize tasks. * Train and mentor team members to enhance their skills and ensure adherence to company standards. * Inspect completed work to ensure it meets specifications and address any quality issues promptly. * Monitor inventory levels of materials and tools, coordinating with procurement as necessary. * Collaborate with the Production Supervisor to address personnel issues, optimize workflows, and resolve production bottlenecks. * Document production activities, including material usage, job progress, and equipment maintenance. * Maintain a clean and organized work environment to promote safety and efficiency. * Perform routine maintenance on fabrication equipment and tools to ensure reliability and longevity. Qualifications * Must be at least 18 years old. * High school diploma or equivalent preferred; additional certifications in fabrication or related fields are a plus. * 3+ years of fabrication experience, with expertise in operating and maintaining fabrication equipment. * Experience in the custom sign manufacturing industry preferred. * Previous leadership or team coordination experience is highly desirable. * Advanced mechanical skills, including proficiency with power tools, punch presses, press shears, and other fabrication equipment. * Strong organizational and time-management skills to oversee multiple projects simultaneously. * Ability to read and interpret blueprints, engineering drawings, and work orders. * Excellent communication skills to provide clear instructions and feedback to team members. * Problem-solving abilities to address production challenges and implement process improvements. * High attention to detail and a commitment to maintaining quality standards. * Ability to stand, bend, and move for extended periods. * Regularly lift and handle materials weighing up to 50-80+ lbs, with the use of lifting equipment as necessary. * Comfortable working in a manufacturing environment with moderate to loud noise levels. * Familiarity with lean manufacturing principles or continuous improvement practices is a plus. * Proficiency in using computer systems for documentation and tracking production activities. Why Work With Us * Supportive & Friendly Culture * Manage national accounts for Fortune 500 companies * Medical, Dental, Vision coverage options * Flexible Spending & Health Savings Accounts * Company paid Life Insurance * 401k with Employer Contribution * Company paid Short/Long Term Disability * Generous Paid Time Off program + Holidays * Career Growth Opportunities and Career Mapping * Additional perks including Pet Insurance, Employee Assistance Program, Educational Assistance Program, Identity Theft Protection, Critical Illness Plans, Commuter Benefits and various employee discount offerings from our Vendors eeo/mfdv

Job Title: Metal Fabricator - Warehouse Pay Rate: $15/hour Schedule: Monday-Friday, 7:00 AM - 5:00 PM (Shift may vary to 8:00 AM - 4:30 PM) Seeking a Metal Fabricator to join our warehouse team. The ideal candidate will have experience working with metal, basic carpentry skills, and the ability to operate saws and hand tools. This role involves sorting and stacking metal materials delivered by trucks and ensuring they are organized properly for fabrication and use. Key Responsibilities: Sort, stack, and organize metal materials upon delivery Use saws and hand tools to cut and shape materials as needed Perform basic carpentry tasks related to metal fabrication Maintain a clean and safe workspace in the warehouse Follow safety guidelines and proper handling procedures Assist with other warehouse tasks as needed Qualifications: Experience in metal fabrication or related field preferred Basic carpentry skills required Ability to operate saws and various hand tools Must be able to lift heavy materials and work in a warehouse setting Reliable, punctual, and able to follow instructions Benefits: Competitive hourly pay Steady weekday schedule Opportunity for skill development in a warehouse environment If you are a hardworking individual with experience in metal fabrication and carpentry, we encourage you to apply!

Lucifer Lighting Company is a privately held San Antonio-based designer and manufacturer of precision-engineered architectural lighting fixtures. You'll find our products everywhere from SF MOMA to the Nike Headquarters. We're in the campuses of 4 of the 5 largest tech companies and 5 of the top 10 tallest towers in the U.S. Our customers are the world's leading architects and designers who look for minimalist industrial design and place a premium on service, quality, and innovation. Our people make magic happen; we are passionate, smart, hard-working, committed, and creative. We like to make work enjoyable and engaging. We light the world's most beautiful spaces. Essential Duties and Responsibilities: Examine specifications of order using blueprints, drawings, and/or work orders, to determine characteristics of finished item, materials to be used, and machine setup requirements. Fabricate work piece as determined by work order specifications. Examine work piece visually, by touch, or using tape rule, calipers, or gauges to ensure product meets desired standards. Qualifications Required Knowledge, Skills and Abilities: Ability to follow written or oral instructions. Ability to select appropriate tools and equipment needed to do a job. Interpersonal communication skills. Ability to read gauges, dials, or other indicators to make sure a machine is working properly. Excel in a fast-paced work environment. Required Education and Experience: High School Diploma or GED A minimum of one year of sheet metal fabrication experience, or six months of experience with related trade school certification. Knowledge of tools, and principals involved in production of precision technical plans, blueprints, drawings, and models. Knowledge of machines such as press brake, punch press, fiber laser and tools, including their designs, uses, repair, and maintenance. Knowledge of materials, methods, and the tools involved in the fabrication of sheet metal products. At least eighteen years of age. Physical Requirements: Manual dexterity and standing for extended periods of time. Adhere to all PPE requirements. Frequent bending, stooping, and reaching. Visual acuity to read printed and electronic documents. Hearing capacity to receive, perceive and react to common machine shop auditory stimuli. Lifting and/or exerting of force up to 40 pounds frequently and up to 20 pounds of lifting/force constantly to move objects. Working Environment: Smoke free workplace. Lucifer Lighting Company is an equal opportunity employer.

ABOUT THE TEPA COMPANIES Established in 2005 and owned by the Paskenta Band of Nomlaki Indians, The Tepa Companies deliver comprehensive and sustainable solutions to federal, state, local, and private-sector clients throughout the United States. The tribally owned companies work independently and collaboratively to provide wide-ranging construction, engineering, environmental, industrial, staffing, and technology services. When you join Tepa Companies, you have the opportunity to expand your entrepreneurial skill set while growing professionally alongside the best in the industry. You will have the opportunity to impact your team, the organization as a whole, and subsequently, our Tribe. We seek out top talent to provide the best services for our clients. We focus on being a responsible company for our employees and their families by creating a culture that reflects our core values and offering competitive pay and benefits package. Our benefits package includes comprehensive medical, dental, vision, generous paid time off and holidays, 401(k) plan with company match, life insurance, flexible spending and health savings account, mental health support and resources, short and long-term disability, and tuition reimbursement. LOCATION: This is a nationwide traveling position requiring frequent travel to project sites across the United States. Per diem will be provided. ABOUT THE JOB The Tepa Companies are seeking a Welding Apprentice who will Perform welding tasks under supervision on piping and plate within petroleum operations facilities. In addition to welding, the successful candidate must be able to assist in tasks related to welding such as fit‐up, preparation, repair, inspection, and post weld preparation. As required, the Apprentice Welder will also be tasked to assist with general site work such as loading and unloading equipment and materials, site clean‐up and preparation, mobilization, and demobilization to and from the jobsite, scaffolding erection, general tank construction tasks and other duties as assigned. This role is intended for May 2026 college graduates who majored in an applicable field. As Tepa continues to grow, we are focusing on hiring recent graduates to begin their careers at our organization with opportunities to receive hands-on learning, mentorship, and growth within the company. This is an entry-level position that does not require previous experience but does require completed education in the particular discipline. Job Functions: * Follow welding procedure specifications when welding * Train and assist with performing quality welds able to pass radiographic examination * Train and assist with performing quality welds using various welding process, such as TIG, GMAW, SMAW, FCAW, etc. * Train and assist with producing quality welds with efficiency * Train to perform or assist with fit‐up and preparation of welds * Perform or assist with post weld cleanup, inspection, and repair * Communicate regularly with the Field Foreman regarding issues and concerns on the job site * Train to determine the required tools, materials and welding methods based on the project specifications * Assist with the assembly, installation, and repair of pipe components and systems according to specifications * Inspect all materials, equipment, and tools required to perform the work * Maintain supplies, equipment, and tools * Properly prepare materials by clamping, cutting, or applying chemical solutions to piping * Observe all safety regulations WHAT WE'RE LOOKING FOR * High School diploma or GED * Formal vocational/technical training in GTAW- Gas tungsten arc welding and basic welding processes/procedures * Must be graduating in 2026 from vocational training (May/June graduates preferred) * Must be able to pass a multi-position weld test utilizing the SMAW process * Must be able to pass 2 and 3G plate welding tests * Must be able to perform stick welds on both carbon and stainless-steel plate and pipe * Must be able to utilize large weld rods (3/16" minimum) in multi-positions in an effective and efficient manner * Ability to learn to read and interpret blueprints, schematics, and written instructions * Must have a general knowledge of AWS, API, ANSI, and ASME codes and standards * Must be able to troubleshoot and have a strong attention to detail * Must have physical dexterity * Must be able to follow verbal directions * Must be able to read and write in English * Must be willing to travel for long durations * Must be able to pass a background check required to access US military installations * Must have a valid driver's license Equal Opportunity Employer Veterans

United Alloy is a preferred designer, manufacturer and powder coater of certified metal tanks, skids, frames, trailers, chassis, and related products crafted to world-class quality standards in strategic partnership with Fortune 500 OEM customers.UA products are proudly "Made in the USA". In addition to being made in the USA, UA is also 9001 certified, and has been recognized as a WBENC woman/minority owned business. CULTURE United Alloy empowers and entrusts our employees to manage the responsibilities of both their work and home lives. We are an agile team that produces extraordinary results, setting the standard in safety, quality, productivity, and profitability. Employees act with a sense of ownership, take initiative to problem solve and is committed to the company's mission, their team and themselves. United Alloy is supportive and encouraging of our employees, we are able to help make their dreams become a reality. At UA, every employee matters to us. We want everyone to have their own success story in their personal and professional lives. It's one way that makes us an actively engaged team, inspired to win together. SUMMARY The UA student learner program is designed to allow students to experience a "hands-on" approach to learning various facets of the organization. The student will have exposure to metal fabrication concepts and processes. This program is intended for students interested in pursuing a career in welding. PROGRAM START DATE: July 13th, 2026 WHAT YOU'LL DO Applicable to all areas of production shop * Can follow written and verbal directions to complete assignments or jobs * Can compute decimal equivalents and interchange fractions * Actively participate in efforts to establish and promote a safe and healthy work environment * Follow all UA policies and procedures * Act professionally and cooperate with other in a team setting * Other duties may be assigned Fabrication Areas * Must be able to set up and run in one of the fabrication work areas * Understands how to manage daily work expectations and goals * Understands, interprets, and follows foreman's report including priorities and start dates * Understands how to read material sheet tags and determines material types and gauges * Understands cross check concepts and inspects product according to Inspection Control Plan * Follows all safety policies and standards * Understands non-conforming process according to SOP-0003 * Maintains accurate and timely system transactions * Can inspect and clean equipment including all preventative maintenance Welding Areas * Welds product using fixturing (if applicable) with minimal supervision * Utilizes hand tools, fixtures, and clamps for small welding applications * Can interpret basic elements of a blueprint, including welding symbols * Can identify types of joints and welds * Can meet UA weld aesthetic standards per customer specifications * Can set up and maintain welding machines including changing wire and monitoring gases * Can monitor and maintain welding consumable and supply stock * Understands cross check concepts and inspects product according to Inspection Control Plan * Accurately tags material and product according to WI-0002 Product Identification * Understands non-conforming process according to SOP-003 * Can maintain a high degree of quality, must not have excessive scrap * Understands and can use basic math principles including addition, subtraction, multiplication and division * Accurately and efficiently perform all required PM on equipment * Able to successfully weld 1st articles and PPAPs * Can make minor repairs to equipment and support equipment * Inspects own work for quality standards Batch Paint/TTX Areas * Load, wash, mask, and unload product during daily operation of the paint line * Will assist the setup personnel as directed for overall set up and changeover of the paint line * Inspects products regularly during production runs and informs set up technician of quality problems * Ability to package finished parts and prep for shipment Assembly Area * Understands cross check concepts and inspects product according to Inspections Control Plan * Accurately tags material and product according to product specifications * Can identify hardware components used in assemblies * Can compute decimal equivalents and interchange fractions * Can accurately count and record production activity including picking, transfers, etc. * Can follow written and verbal directions to complete assignments or jobs Shipping Area * Ability to interpret and systematically prepare packing slips, bills of lading and other shipping related documentation prior to shipping any product * Follow proper packaging methods and reference United Alloy's Master Document system for formal instructions * Assists with raw material inventory control and accuracy: including sheet stock, hardware, and other components WHAT YOU'LL NEED * High School Junior or Senior in "good standing" that is 16-18 years of age; Must be willing to provide transcripts and faculty/personal recommendations upon request. * Submit an application that includes a well-written essay on why you want to be a United Alloy Youth Apprentice * Must have reliable transportation to work * Success completion of technical education courses and/or current enrollment in technical education courses * Ability to follow instructions both written and verbal * Basic computer skills * Must possess the ability to utilize tape measure, caliper, basic hand tools and air tools * 12 Expected Behaviors of Actively Engaged Person - 100% Responsible, Trustworthy, Team Player, Clear Communicator, Empathy, Humility, Emotional Self-Control, Resolves Conflict Directly, Positive Attitude, Respects Others, Problem Solver, and Agile. BENEFITS In addition to excellent starting wages, we offer a competitive compensation and benefits package as well as numerous perks. * Medical, dental and vision * Generous RTO and Vacation policy * 401(k) with company match * Bonus opportunities * Paid training * Company paid holidays * Earn a competitive salary and performance-based bonuses NOTE: Given the nature/size of our product and customer requirements, we require a stringent hiring process to ensure the highest quality product. Qualified candidates must successfully complete: Basic Skills/Measurement Test | Blueprint Reading Test | Pre-Employment Physical & Drug Screen Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, sit, walk, bend, twist, stoop, pull, push, assemble, and carry for extended periods of time. Ability to lift and/or move up to 25 pounds regularly, frequently lift or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with an assist. Work Environment: Ability to perform in a manufacturing environment that may have high noise levels, dust, chemicals, oil, and grease. Ability to work in an environment that may be either hot, cold or humid.

Candidates chosen for an interview will be required to demonstrate TIG and/or MIG welding skills during the interview. High standards in TIG welding are expected due to sanitary demands of the food industry, for which we manufacture conveyor and material handling equipment. Job Title: Fabrication Welder FLSA: Non-Exempt | Job Status: Full Time Reports To: Production Supervisor PURPOSE OF POSITION Weld complex assemblies as required using TIG and some MIG welding techniques. ESSENTIAL DUTIES AND RESPONSIBILITIES The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. More specifically, the employee owner will: The ability to weld complex assemblies as required using TIG or MIG welding techniques. Fabricate small components as required. The safe use of various equipment I.E. Hydraulic bushing presses, drill presses, band saws, spot welders, grinders, hand tools, etc. Use and understand various paperwork, including schedules, bar code system for tracking projects, prints & tech standards. Fork lift operation. Overhead hoist and/or crane operation and safety. Perform routine housekeeping and maintenance. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regular, consistent attendance. EDUCATION - EXPERIENCE - COMPUTER SKILLS High School diploma or general education degree (GED); or One year of related experience and/or training; or Equivalent combination of education and experience. TRAINING - CERTIFICATIONS - LICENSES Welding certificate preferred but not required. Fork lift license desired. Continually participate in additional training related to the job. COMPETENCIES To perform this position successfully, individual should demonstrate the following work competencies: Problem Solving - Identifies and resolves issues in a timely manner. Communication Skills - Speaks clearly, listens and receives clarification, respond to questions. Dependability - Follows instructions, responds to management direction, and takes responsibility. Quality Assurance - Demonstrates accuracy and thoroughness. Ethics/Professionalism - Treats people with respect; Works ethically and with integrity. PFI Organizational Support - Follows policies and procedures. Judgment - Exhibits sound and accurate judgment. Safety and Security - Observes safety and security procedures; Uses equipment properly. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee: Must be able to frequently stoop/bend. Must be able to regularly use hands and arms. Must be able to regularly stand and walk. Must be able to occasionally lift and/or move more than 100 pounds with hoist available. Must be able to regularly lift and/or move up to 50 pounds with hoist available. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Specific hearing abilities required for this job include the ability to hear equipment alarms and the ability to hear instructions from others. ENVIRONMENTAL ADAPTABILITY The noise level in the work environment is usually loud. Regularly exposed to working near moving mechanical parts, fumes or airborne particles, and extreme heat (nonweather) May be exposed to the risk of electrical shock and vibration. Steel-toe safety shoes, safety glasses, hearing protection, and protective gloves. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. PFI is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, The Employer will provide reasonable accommodations to qualified individuals with disabilities and encourages prospective employees and incumbents to discuss potential accommodations with PFI.

Temp Welder - Structural & Pipe Schedule: Full-Time, Monday - Friday 7:00 am - 4:00 pm Industry: Industrial / Fabrication / Manufacturing About the Role We are seeking a skilled Welder to join our team and support a wide range of industrial projects. In this role, you will perform layout, fit-up, and welding tasks across multiple environments, gaining hands-on exposure to modern industrial practices. Work includes structural weldments, pressure vessel construction, and field fitment of piping systems and components. This is an excellent opportunity for welders looking to broaden their experience with diverse equipment and shop operations. Responsibilities Perform layout, fit-up, and weld joint completions using a variety of welding procedures. Work on structural weldments, pressure vessels, piping systems, and structural components. Operate overhead cranes, forklifts, powered hand tools, and material-handling devices. Follow shop drawings, ISO drawings, and weld symbols with strict accuracy. Perform field fitment and assist in the assembly of piping and structural systems. Communicate instructions to junior technicians and interact with engineering staff. Train in related skills as needed and support various welding and fabrication tasks. Requirements High School Diploma or equivalent (required). 2-5 years of welding experience in pipe and/or structural environments. Strong ability to read and interpret shop drawings, ISO drawings, and weld symbols. Proficiency in multiple welding processes, including multi-position welding. Ability to understand complex instructions and collaborate with engineering teams. Knowledge of piping and structural systems and related tools. Physical Requirements Ability to stand, walk, and perform physical tasks for extended periods. Work in environments with heated metals, noise, fumes, grinding dust, and outdoor exposure. Must be able to lift, carry, and move large solid objects (lifting assistance available). Why Join Us? Exposure to cutting-edge industrial welding techniques Opportunities for skill advancement and cross-training Hands-on work with a variety of equipment, tools, and fabrication tasks

Apply Description Duties and Responsibilities Cutting and joining metal parts for fabricating or repairing vehicle equipment, tools and various other articles, applying tools like stick. Designing and fabricating the equipment and parts for meeting the special or unusual needs, using the manufacturer specifications, calculator, measuring devices, drawings etc. Installing or removing any special equipment like paint machine, grinder, power and hand tools etc. Designing and creating holding jigs that aid in fabrication of the parts in various numbers. Maintaining a record of all the work completed so as to facilitate the accounting activities. Maintaining routine inventory supplies that are used for operating the welding unit via inspection of stocks and ordering fresh stock as and when required. Skills and Specifications Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods. Knowledge of safety precautions related to occupational hazards, procedures and practices of the trade. Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment. Skilled in operating at least some type of vehicles like trucks, motor homes etc. Education and Qualification Entry level welder fabricators are expected to pass relevant technical exams in the field. Basic mathematics skills Basic knowledge of welding symbols and blueprint reading skills. Ability to work with complicated welding tools like ox-fuel, plasma, mag-drills, chainsaws etc.

Job DescriptionDescription: Duties and Responsibilities Cutting and joining metal parts for fabricating or repairing vehicle equipment, tools and various other articles, applying tools like stick. Designing and fabricating the equipment and parts for meeting the special or unusual needs, using the manufacturer specifications, calculator, measuring devices, drawings etc. Installing or removing any special equipment like paint machine, grinder, power and hand tools etc. Designing and creating holding jigs that aid in fabrication of the parts in various numbers. Maintaining a record of all the work completed so as to facilitate the accounting activities. Maintaining routine inventory supplies that are used for operating the welding unit via inspection of stocks and ordering fresh stock as and when required. Skills and Specifications Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods. Knowledge of safety precautions related to occupational hazards, procedures and practices of the trade. Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment. Skilled in operating at least some type of vehicles like trucks, motor homes etc. Education and Qualification Entry level welder fabricators are expected to pass relevant technical exams in the field. Basic mathematics skills Basic knowledge of welding symbols and blueprint reading skills. Ability to work with complicated welding tools like ox-fuel, plasma, mag-drills, chainsaws etc. Requirements:

ESSENTIAL DUTIES AND QUALIFICATIONS: Weld components in flat, vertical, or overhead positions. Positions work pieces; clamps work pieces together or assembles them in jigs or fixtures. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Develops templates or other work aids to hold and align parts. Analyzes engineering drawings and specifications to plan layout assembly, and welding operations. Reviews layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components. Inspects grooves, angles, or gaps allowance, using micrometer, caliper, and precision measuring instruments. Removes rough spots, excess weld, and slag or spatter using portable grinder. Inspects finished work pieces for conformance to specifications. Manually lifting, pushing, pulling, and/or carrying objects weighing up to 50 pounds. Other duties as assigned. Regular predictable attendance. GENERAL QUALIFICATIONS MAY INCLUDE THE FOLLOWING: The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions. The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged. The ability to concentrate on a task over a period of time without being distracted. The ability to providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. The ability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. The ability to see details at close range (within a few feet of the observer). Ability to follow instructions Ability to work on more than one task at a time Ability to adapt quickly to changing conditions Ability to work with minimum supervision Ability to work effectively with fellow employees Ability to perform repetitive work Maintains composure in stressful situations. Reports to work on time and as scheduled.

Benefits: Competitive salary Opportunity for advancement Training & development Welder's Helper - Hiring Now | Must Be Willing to Travel Company: Triple Tech Welding Pay: DOE (Hourly) Job Type: Full-Time About Us: Triple Tech Welding is a structural steel welding and erection company based in New Braunfels, TX. We specialize in high-quality fabrication and installation of structural steel components. We're looking for a hardworking and dependable Welder's Helper to join our growing team. Job Responsibilities: Assist welders in fabricating and installing structural steel. Operate basic welding and hand tools such as grinders, cutting torches, and measuring tapes. Help set up work areas, prep materials, and clean up job sites. Follow safety guidelines and assist in ensuring a safe work environment. Travel to job sites as required (out-of-town travel may be necessary). Requirements: ✅ Must be willing to travel (out-of-town jobs as needed). ✅ Valid ID & reliable transportation to job sites. ✅ Experience with basic welding and hand tools (grinders, torches, etc.). ✅ Ability to work outdoors in various conditions. ✅ Strong work ethic, ability to follow instructions, and attention to detail. ✅ Experience reading blueprints is a plus but not required. What We Offer: Hourly pay DOE Travel compensation (if applicable) Hands-on training and opportunities for growth in structural welding 🚀 Apply Today! Compensation: $15.00 - $23.00 per hour SEAA is a not-for-profit organization dedicated to the advancement of steel industry professionals. SEAA assists our members in their employee recruitment, hiring and training processes and we provide on-going safety and training support in effort to nurture success.

Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Essential Duties and Responsibilities: Operate safety equipment, and use safe work habits. Weld components in flat, vertical, or overhead positions. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. Detect faulty operation of equipment and/or defective materials, and notify supervisors. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Performs other related duties as required. Educational and Other Requirements: High School diploma or equivalent preferred, but not required. Minimum one (1) year work related skill, knowledge, and hands on experience or vocational training preferred, but not required. Must stay in position for at least two (2) years depending on prior experience before promoting to Welder II. Knowledge of principles and processes for providing customer and personal services. Sensitive to confidential information. Must work independently and as a member of team. Mental and Physical Requirements: Able to read, speak and write English. Strong physical and mental health to maintain demanding workload. Able to work under stressful conditions at times. Climbing - able to go up and down stairs. Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Able to wear common protective or safety equipment such as safety shoes, glasses, gloves, hearing protection, hard hats when needed, including welding safety equipment. Position will consistently dictate 40 - 60 hours per week with frequent overtime demands based on the workload requirements. Position will require some (6) six day weeks when workload demands, with time off scheduled per current workload and other staff availability. Strong work ethics of integrity and honesty strives for excellence in all activities employing accompanying communication. Observing, receiving, and otherwise obtaining information from all relevant sources. Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. Analyzing information and evaluating results to choose the best solution and solve problems. Resolving conflicts and other minor problems. Dependable, reliable, fulfills responsibilities. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Essential Duties and Responsibilities: * Operate safety equipment, and use safe work habits. * Weld components in flat, vertical, or overhead positions. * Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. * Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. * Detect faulty operation of equipment and/or defective materials, and notify supervisors. * Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. * Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. * Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications. * Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. * Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. * Performs other related duties as required. Educational and Other Requirements: * High School diploma or equivalent preferred, but not required. * Minimum one (1) year work related skill, knowledge, and hands on experience or vocational training preferred, but not required. * Must stay in position for at least two (2) years depending on prior experience before promoting to Welder II. * Knowledge of principles and processes for providing customer and personal services. * Sensitive to confidential information. * Must work independently and as a member of team. Mental and Physical Requirements: * Able to read, speak and write English. * Strong physical and mental health to maintain demanding workload. * Able to work under stressful conditions at times. * Climbing - able to go up and down stairs. * Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. * Able to wear common protective or safety equipment such as safety shoes, glasses, gloves, hearing protection, hard hats when needed, including welding safety equipment. * Position will consistently dictate 40 - 60 hours per week with frequent overtime demands based on the workload requirements. * Position will require some (6) six day weeks when workload demands, with time off scheduled per current workload and other staff availability. * Strong work ethics of integrity and honesty strives for excellence in all activities employing accompanying communication. * Observing, receiving, and otherwise obtaining information from all relevant sources. * Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. * Analyzing information and evaluating results to choose the best solution and solve problems. * Resolving conflicts and other minor problems. * Dependable, reliable, fulfills responsibilities. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description We Are Thermon Inc. is a World leader in Process heating systems. We are currently experiencing rapid growth due to global expansion. We design and manufacture heating and filtration systems for the Energy sector primarily Oil, Gas, Nuclear and process heating applications. Thermon has an established record of innovation and excellence. We recognize this is only possible with the hard work and dedication of our employees. We strive to maintain a dynamic and diverse workforce. We offer environments where collaboration, mentoring and professional growth are encouraged. Ideal candidates for our team will recognize the value of being a part of an organization that not only provides a competitive wage but that also promises a great career. What You Will Do Read blueprints/drawings and review job package TIG and Micro tube welding Brazing Oxy-fuel welding Follow all safety protocols and procedures Alert management to issues with product quality Complete QC checklists to verify product quality Continuously improve work processes and methods Knowledge & Qualifications Grade 12 Minimum of 5 years of proven relevant experience (TIG, MIG, etc.) Ability to lift up to 50 pounds What You Bring To This Role Strong English communication skills - verbal, written, comprehension Ability to read/interpret blueprints Exceptional attention to detail and quality Hand/eye coordination Team player and able to work independently Demonstrated organizational skills High regard for safety

Job Description The Welders Helper supports the welding team in various tasks associated with the fabrication and assembly of products. This role is ideal for individuals eager to gain hands-on experience in welding and fabrication processes while working in a dynamic environment focused on regenerative agricultural solutions. Key Responsibilities: Assist welders in preparing materials for welding by cleaning, cutting, or grinding surfaces. Help set up welding equipment and tools before each project. Support in positioning and securing workpieces for accurate welding. Follow safe operating procedures and maintain a clean and organized work area. Perform basic maintenance on welding equipment and tools. Learn and apply various welding techniques and safety practices. Operate hand tools and power tools as necessary. Assist in the inspection of completed welds for quality assurance. Participate in team meetings and training sessions to enhance skills. Requirements Qualifications: High school diploma or equivalent preferred. Previous experience in a welding shop or fabrication environment is a plus, but not required. Basic understanding of welding processes and safety practices. Ability to follow detailed instructions and guidelines. Strong attention to detail and willingness to learn. Ability to lift heavy materials and stand for long periods. Good communication skills and ability to work well in a team environment. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development

We Are Thermon Inc. is a World leader in Process heating systems. We are currently experiencing rapid growth due to global expansion. We design and manufacture heating and filtration systems for the Energy sector primarily Oil, Gas, Nuclear and process heating applications. Thermon has an established record of innovation and excellence. We recognize this is only possible with the hard work and dedication of our employees. We strive to maintain a dynamic and diverse workforce. We offer environments where collaboration, mentoring and professional growth are encouraged. Ideal candidates for our team will recognize the value of being a part of an organization that not only provides a competitive wage but that also promises a great career. What You Will Do * Read blueprints/drawings and review job package * TIG and Micro tube welding * Brazing * Oxy-fuel welding * Follow all safety protocols and procedures * Alert management to issues with product quality * Complete QC checklists to verify product quality * Continuously improve work processes and methods Knowledge & Qualifications * Grade 12 * Minimum of 5 years of proven relevant experience (TIG, MIG, etc.) * Ability to lift up to 50 pounds What You Bring To This Role * Strong English communication skills - verbal, written, comprehension * Ability to read/interpret blueprints * Exceptional attention to detail and quality * Hand/eye coordination * Team player and able to work independently * Demonstrated organizational skills * High regard for safety

Job Description As an Entry Level Welder at Range Ward, you will be introduced to the world of welding and metal fabrication. This role is perfect for individuals eager to start their career in welding, gain hands-on experience, and contribute to the production of high-quality agricultural products. You will work closely with experienced welders and fabricators, learning the fundamentals and best practices in a supportive and safety-focused environment. Key Responsibilities: Execute various welding processes under the guidance of skilled welders. Prepare materials for welding by cleaning, cutting, and fitting components together. Learn to read and interpret blueprints and technical drawings related to welding projects. Maintain a safe and organized workspace by following all safety protocols and guidelines. Assist in performing quality checks on welds and assembled components. Participate in regular training to develop welding skills and knowledge of equipment. Work collaboratively with team members to meet production goals. Requirements Qualifications: High school diploma or equivalent. Basic understanding of welding techniques and safety measures preferred but not required. Willingness to learn and a strong work ethic. Ability to follow instructions and understand technical documents. Excellent hand-eye coordination and attention to detail. Physical ability to lift heavy objects and stand for extended periods. Strong communication skills and the ability to work effectively in a team environment. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Training & Development